form treatment m a s c o . n e t · pdf fileform treatment [ back to masco.net ... strip...

122 MASONS SUPPLY COMPANY Oregon (800) 537-3407 Washington (800) 537-6216Clackamas | Eugene | West Eugene | Gresham | Hillsboro | Medford | Portland | Salem | Seattle | Tacoma | Wilsonville | Woodinville | Vancouver
M A S C O . N E T
[ BACK TO MASCO.NET ]
PLYFORM
High Density Overlay (HDO)High Density Overlaid Plywood is the standard "workhorse" of the concrete industry. Producing uniform surfaces and offering high reuses, HDO Plywood is ideal for most engineered forming systems. With HDO Plywood, cost-per-pour is low. It's tough resin overlay resists the alkali complexion of concrete and the scouring action of aggregates, enabling it to last far longer than BB-grade or MDO plywood. With reasonable care, 25 plus reuses can be expected. HDO Plywood gives concrete a smooth, glossy finish. Surface discoloration is held to a minimum because the overlaid veneer is impermeable and non-absorbent which keeps hydration uniform. The smooth face of overlaid plywood promotes the evacuation of air during consolidation, reducing bugholes and honeycombing. HDO Plywood minimizes grain and patch transfer as well. Since it keeps its finish longer than ordinary plywood, HDO Plywood assures a more consistent surface appearance. With HDO Plywood, stripping and clean-up are a breeze. It's non-absorbent so form release agents stay where they can do the most goodon the face of the panel. After a pour, HDO Plywoodrequires minimal clean-up for subsequent pours.
Medium Density Overlay (MDO)For moderate reuse at a cost that's comparable to BB-grade plywood, Medium Density Overlay Plywood is an excellent value. MDO Plywood is best suited to applications where a glossy finish is undesirable or where a final finish of paint or acoustic texture is specified. MDO Plywood will leave concrete with a matte finish that readily accepts coatings. This same matte surface helps MDO Plywood hold release agents uniformly in place so there's less blotchiness from uneven hydration.
Finish Form Finish Form provides a superior concrete finish, leaving your surface smooth, clean, and consistent. It's high durability of scuff and abrasion resistance is excellent in strength. This increases panel reuse in concrete forming. For exterior use: Panels resist severe weather conditions. Finish Form is edge sealed to prevent moisture from penetrating. It is Ideal for exposed or Architectural concrete, yet cost effective for clad structural concrete. Finish Form's quality material results in an increased number of pour and optimum usage (unlike many other domestic forms). Finish Form is a hardwood panel and with more plys than domestic form.
No. Description Size Wt (lbs)
CFA HD011828-2 2 side 1-1/8" x 2' x 8' 54.0
CFA MD03448-1 1 side 3/4" x 4' x 8' 70.0
CFA M003448-2 2 side 3/4"x4'x8' 70.0
CFA MD011828-2 2 side 1-1/8" x 2' x 8' 54.0
CFA FF3448-2 2 sides 3/4" x 4' x 8' 70.0
CFA FF11828-2 2 sides 1-1/8" x 2' x 8' 54.0
FORM TREATMENT
http://masco.net/web/index.php?option=com_content&task=section&id=5&Itemid=60http://masco.net/web/index.php?option=com_content&task=section&id=5&Itemid=60

123MASONS SUPPLY COMPANY Oregon (800) 537-3407 Washington (800) 537-6216Clackamas | Eugene | West Eugene | Gresham | Hillsboro | Medford | Portland | Salem | Seattle | Tacoma | Wilsonville | Woodinville | Vancouver
M A S C O . N E T
FORM TREATMENT
FORM TREATMENT
Anchor Slot Used where masonry veneer is to be placed over concrete. Dovetail slot is accurately formed of 24 gauge galvanized steel filled with foam. The foam filler prevents grout from filling the slot. For application pre drill slot and attach to form work on 12" centers. Use caution not to allow dovetail to spread or collapse. Once forms are stripped, dovetail anchors are keyed into the slot.
Chamfer - PVC FlexibleChamfer Strip makes exposed outside corners of columns, beams and joists better looking and more durable. Nearly perfect corners are possible on columns as small as four inches. Reusable PVC works like wood but lasts 4 to 10 times longer. For maximum life chamfer strip should be applied with staples. 10 lf lengths.
Steel ChamferUsed with steel forms to produce smooth straight corners with multiple reuses.
No. Description Wt/Pc (lbs)
AA 24DTG 24 Gauge x 10' lengths 3.8Also available in other gauges.
No. Size Wt/Pc (lbs)
SY 42168 1/2"x10' 4.4SY 42169 3/4"x10' 11.2
SY 42170 1"x10' 17.5
No. Description Wt/Pc (lbs)
GS 611 1/2" PVC w/Tail 1.2
GS 612 3/4" PVC w/Tail 2.3
GS 613 1" PVC w/Tail 3.8
GS 621 1/2" PVC 1.0
GS 622 3/4" PVC 2.0
GS 623 1" PVC 3.5
Standard Chamfer DimensionsSize A Dimension B Dimension1/2" 1/2" 23/32"3/4" 3/4" 1-1/16"1" 1" 1-13/32"
--------------B------------
---
----
---A
----
----
--
(See Pages 233-234 for more Chamfers)
With Tail
No Tail

M A S C O . N E T
FORM TREATMENT
Wood ChamferProduces smooth, straight bevels in freshly cast concrete. 1000 lf per bundle.
No. Size Wt/Lf (lbs)CFA WC12 1/2" 0.02
CFA WC34 3/4" 0.05
CFA WC1 1" 0.06
Chamfer CutterFor quick, clean cuts in wood chamfer up to 1". Hardened steel blade slices through most soft woods easily. Anvil acts like a chopping block, supporting the chamfer as the blade passes through it. A built in fence to either side of the blade assures perfect 45 degree miters every time. German crafted, pocket size; lock tight for safe carrying and quickly disassembled for sharpening.
No. Description Wt (lbs)
CFA WCUT Cutter 1.0
CFA WH Holster
CFA WB Replacement Blade
FORM TREATMENT
Standard Chamfer DimensionsSize A Dimension B Dimension1/2" 1/2" 23/32"3/4" 3/4" 1-1/16"1" 1" 1-13/32"
--------------B------------
---
----
---A
----
----
--

125MASONS SUPPLY COMPANY Oregon (800) 537-3407 Washington (800) 537-6216Clackamas | Eugene | West Eugene | Gresham | Hillsboro | Medford | Portland | Salem | Seattle | Tacoma | Wilsonville | Woodinville | Vancouver
M A S C O . N E T
FORM TREATMENT
BondoA two-part component system that is a non-shrink, non-reactive and durable for repairing metal, wood, steel and plastic. Repair dents, patch holes and restore chips quickly and easily.
Metal Form PatchForm patches provide a quick and economical means to cover form tie holes in plywood. The covers are available in 1-3/4" to 2-3/4" diameters and produced from thin steel with six ears punched to bite in. 1,000 pieces per carton.
Plastic Form PlugPlugs slight taper allows for easy installation. Once applied, they stay in place for many pours. 9/16" for snaptie holes, 13/16" for loop end camlock ties and 17" she bolts, 1-5/16" for 1-1/4" taper tie and 1- 9/16" for 1-1/2 taper tie. 1,000 pieces per carton.
Foam TapeClosed cell vinyl foam with pressure sensitive adhesive on one side. Used with concrete forms to provide gap filling snug joints. Supplied in thickness of 1/16", 1/8", 1/4", and 3/8". Widths as required.
Paddle BitForged in one piece from special high analysis tool steel. Heat treated length to give overall strength. Shanks will not twist off.
FORM TREATMENT
No. Size Wt (lbs)
CT 916FP 9/16" 0.004
CT 1316FP 13/16" 0.007
CT 1516FP 15/16" 0.008
CT 11516FP 1-5/16" 0.009
CT 1916FP 1-9/16" 0.010
No. Size Wt (lbs)
DS 134FP 1" Metal 0.02
DS 64150 Magnetic Setting Tool
No. Size Wt (lbs)
TDR WB500 1/2" 0.07
TDR WB916 9/16" 0.07
TDR WB625 5/8" 0.07
TDR WB750 3/4" 0.07
TDR WB1316 13/16" 0.07
TDR WB875 7/8" 0.07
TDR WB1516 15/16" 0.07
TDR WB1 1" 0.07
TDR WB1125 1-1/4" 0.10
TDR WB112 1-1/2" 0.10
No. Size Wt (lbs)
MS 1GB 1 gal. can w/hardener 12.0
No. Size
CT 1161FT 1/16"x1"CT 181FT 1/8"x1"CT 141FT 1/4"x1" CT 381FT 3/8"x1"

M A S C O . N E T
FORM TREATMENT
Expanding Foam SealantDescription: A single component, moisture-cure, polyurethane foam sealant with a (H) CFC free propellant designed to fill gaps, cracks, etc., and used to stop air infiltration around door and window frames and pipe penetrations.
Application: Fill the lowest part of the cavity first. When using Expanding Sealant, fill only 40% with foam since formula expands approximately 2-1/2 times. Temp

form treatment m a s c o . n e t · pdf fileform treatment [ back to masco.net ... strip...

Documents