frd furukawa reserves right to change specifications
TRANSCRIPT
HCR1500-ED -E1206-F4Printed in Japan
FRD Furukawa reserves right to change specifications without prior notice.
ISO9001 ISO14001Takasaki, Yoshii Works
Certified Management System
5-3, 1-chome, Nihonbashi, Chuo-ku, Tokyo 103-0027, JapanPhone +81-3-3231-6982 Fax +81-3-3231-6994
Eco friendly engineNewly designed economy mode
D D SI D S
: Dual Damper System: Integrated Drilling System
The key for market leading drilling performance
With the field proven HD700 series drifter and IDS,it’s easier than ever before to drill FAST & STRAIGHT.
1 2
IDS : All-hydraulic drilling controls allow forautomatic adjustment of impact force and feedforce to match changing of rock formations.IDS-2 as optional devise, is monitoring rockconditions and automatically adjust feed speed.Dual-Damper System provides maximumimpact energy transfer, and minimizes energyof return shock wave.Working together, these integrated systems arethe keys to highest-possible drillingperformance at low running cost.
Integrated Drilling System
The Reverse Percussion System (RPS)makes it easier to free a stuck rod.A substantial increase in extraction forceallows the field proven RPS (optional) toremove struck rods quickly.
Reverse percussion systemThe FURUKAWA HD700 series drifter isdesigned to minimize drill noise andvibration without sacrificing performance.Incorporating a new piston design, theHD715 drifter maximizes energytransmission and drills effectively in avariety of rock types.
Compact valve designFRD has developed the Dual-DamperSystem, a first in the industry. Formaximum energy transfer, active DDSminimizes return of shock waves bykeeping the bit firmly against the rock at alltimes during drilling. Active DDS minimizespercussion energy loss and by optimizingthe overall feed force, greatly improves thelife of drilling accessories. An additionalbenefit is greatly improved life of drillingaccessories.U.S. PATENT No.5,896,937
Dual-damper system DDS
3 4
Drill faster and straighter with our patented HD715 drifter.
Dual damper
Compact valve design
Newly designed piston
5 6
Manual / Auto selector switchSwing switchClamp(F) switchClamp(R) switchSlide switchRotating switch
Rod changer control lever
Power mode( Previous model has only this mode for drilling )
2,000 min-11,800 min-1
Engine FaultThe warning lamp indicates a serious malfunction in the engine.Engine DiagnosisThis alert indicator is used to indicate the existence of active fault in the engine withflashing codes.
Hydraulic Temperature (High)
alarm
Compressor oil filter
Air cleaner
Hydraulic oil filter
Hydraulic oil temperature (Low)
Compressor overheat
Hydraulic oil level
Alternator (charge)
Warning lights
Engine diagnostic lamp
Engine fault lamp
Normal forward positionFast forward position
Normal backward position
Fast backward position
Normal rotation positionReverse rotation position
Collaring positionRegular drilling position
Drilling position indicator
2,200 min-1
1,600 min-1
Engine Diagnostic Monitor
Meter panel
New economy mode( Have a choice from 3 types of power )
“Light” work
According torock condition
“Hard” work
Permits the operator to add and withdraw rods using asingle lever, and to select which rods in the rack touse, thereby spreading the wear evenly among all therods in the rack and helping to reduce costs.
For the hole cleaning, Engine speed automatically increases up 2,200 min-1.As a result, even in economy mode, you can realize the perfect cleaning as power mode does.
Easy handling rod changer
By using power-saving switch, fuel consumption is reduced during “light”work conditions. Maximum 30 % reduction on previous models.While drilling, Engine speed can be adjusted lower than power mode.Engine speed can be selected from one of following speed.
Newly designed economy mode
( Joystick type )
Rod changer adjusting panel
Thanks to advanced hydraulic and pneumatic technology,output energy can be transferred to each component withminimum power loss. These systems support highproductivity.
Low-emission engine
Powerful CAT engine is fully compliant with Tire3 / Eurostage-3 emission control. It gives full control for easy drilling.
Digital engine indicatorEasy check engine condition in the Cab.
Engine rpmEngine hour meterEngine coolant tempEngine oil pressure etc.
Engine throttle controlAdjust the engine speed.Position : 1,250 min-1
Position : 1,600 min-1
Position : 1,800 min-1
Position : 2,000 min-1
Position : 2,200 min-1
CAUTIONThe diesel fuel quality greatly affects the performance andlife of the engine. Use only clean, high quality fuel.
Power-saving switch
Engine speed select switch
Starter Switch
Maximizes operator performance with the ultim ate in drilling technology.
87
High out-put compressor increases flushing air,providesfaster drilling and decreases bit wear. The upgraded dustcollector has a suction capacity. The dust collector includesan effective pre-cleaner to reduce the escape available fordifficult drilling conditions.
Sliding suction cap can be raised toallow a fast visual check of operation.
Easy to check hole
Pre-cleanerDust collector
High capacity compressor & Dust collector
Pressure gauge installedto center pillar. Easilycheckable from sittingposition.
Monitor panelDrilling position indicatorCompressor dischargetemperature gaugeHydraulic oil temperature gaugeDigital engine indicatorImpact pressure gaugeFeed force pressure gaugeRotation pressure gaugeFlushing air pressure gaugeLeveler
Rear work light switchCompressor starting switchFront wiper switchRoof wiper switchSafety lock leverEmergency stop switchDoor unlock lever
Pillar mounted gauges
A mode switching hydraulic circuitperforms switching between N modefor homogeneous rocks and H modefor hard rocks, thus enabling safeand speedy drilling.
Mode selector
Anti-jamming device
Rod changer control leverAir flushing leverGreasing switchHood & Centralizer switchMode selector switchAnti-jamming switchTraveling speed switchHeadlight switch
An anti-jamming device optimizesthe drilling condition for a variety ofrock types, thus offering extended bitand rod life, and consequentreduction in running cost.
Left side control box
Boom slide / Guide rotary (if equipped)Oscillating / Guide slide
Impact (collaring) and feed forwardpositionImpact (regular drilling) and feedforward positionFeed forward position (fast)Feed backward positionFeed backward position (fast)
Guide tilt / Guide swingBoom lift / Boom swing
Indicator switchCollaring pressure adjusting dialRegular drilling pressure adjusting dialRod revolutions adjusting dialAir conditioner control panelEngine throttle switchStarter switchDrink holder
Joystick drilling leverHorn switchFeed speed adjusting control dialFeed pressure adjusting control dialHydraulic cylinder control panel
A single multi-function lever controls all thedrilling functions.Pull-Drilling Specification( standard )
Joystick operation
Right side control box
2 boom speedOperating speed selector
Impact switch
Normal rotation
Reverse rotation
Easy operation and improved - reliability
Centralizer
Greaser nozzleGreaser nozzle
Slide suction cap
109Foot blow
Suspension seat
AM/FM radioRear blow
Front blow
Operator seat
Temperature control switchMode selector switch
Front Blow Front / Rear Blow Foot BlowInternal / external air selector switchFan switchOFF switchAir conditioning switch
Air-con filterExternal air filter
Control panel
Air conditioner
1100 mm wide cab provides large windows at the front and on the right side maximizeoperator visibility. Cab is air conditioned and pressurized with filter air to keep out dust.
ROPS Roll-Over Protective Structures FOPS Falling-Object Protective Structures
Comfortable cab
IMS is a multi-display unit. When the engine isstarted, the machine conditions and operatingtroubles are indicated on the information display.(optional equipment)
etc
Display
etc
Display
IMS- displays the information onperiodical check and maintenance.
IMS- I indicates the operatingtroubles and the maintenanceinformation being required on theinformation display.
Safety equipment is provided.
Travel levers
IMS Intelligent Monitoring SystemBoom extension length : 900mmExtension boom increases patternflexibility.
without track oscillation
Independent track oscillation provides safe tramming inany time.
Heavy-duty track flames provide strength anddurability. One-piece drive sprockets aremanufactured with hardened surfaces for longerlife. Heavy-duty track links are forged from high-manganese alloy steel, and pins and bushingsare induction-hardened. Standard full trackguards protect undercarriage, Track tension canbe adjusted easily with a grease gun.The entire machine oscillates up-down 7.5degrees total 15 degree to maintain machinelevel.
Heavy duty undercarriage &oscillating
Extension boom
ForwardBackward
Forward
BackwardBackward
Lock positionUnlock
Safety lock lever
Oscillating cylinder
Minimizes operator fatigueManeuverability, Safety & Visibility
1211
All daily maintenance can be performed at ground level. Gas-assisted dampers allow thehinged service doors to be opened easily for access to all required maintenancerequirements.
Accessibilityfor
maintenance
Services for all the heat-exchangers and the batteriesare carried out form the rear access cover. Cleaningof the radiator or the cooler fins can be made formthe ground level.
Showing pictures including optional equipments.
Access to the radiator grille
Service for the engine, the electric control panel andthe compressor can be made from the left sideaccess cover.
Access to the left side cover
Access to the upper coverService for the engine top and the dust collector driveare within the reach.
Fully opened access cover makes access to theradiator, the dust collector, the grease can and thedrilling control valves easier.
Access to the right side cover
Hoses and piping clearly accessible forMaintenance
For Safety equipmentFan guards Safety lock lever Head guards Emergency stop
Fan guards and beltguards are standard.
Stops the traveling functionand the function of thedrifter’s feed operation.
Roof is reinforced andoverhead window is steelgauge protected.
Stops the engine in anemergency.
Lock
Unlock
Evacuation hammer
Wear plate
Synthetic ware plates fordrifter carriage.
Double hose reels
Extends hose life, ensureslonger service life andreduces service load.
Fire extinguisher
Located at rear-right-side ofthe cab.
Easy Maintenance & Safety Functions.
Drilling coverageVertical drilling coverageHorizontal drilling coverage
1413
Ladder for access rear enginecover
Folding catwalk
Rear view monitoring camera
Single shoe
Emergency shut down system
3 dimensional electric angleindicator with drilling depth andinclination
Water tank for water injectionsystem
Additional lights 70 W x 2Tool box
2 dimensional electric angleindicator
Guide swing angle indicator bypendulum
Optional equipment
The contents of this specifications are subject to change without notice in the future.
Dimensions mmStandard & Optional equipments Specifications
StandardROPS/FOPS cab
StandardExtendable boom
MM / MF rod
Rod size
Length of rod
OptionalHigh capacity battery
Optional45R (T45)
Select
OptionalEnergy-saving mode selector
OptionalWinter package for anti-freeze
StandardJoystick control for impact, feed and rotation
StandardResinous wear plate for carriage
StandardGuide rotary
Boom
Standard51R (T51)
Standard12 ftRod changer
OptionalOpen-Close + Slidable suction hoodStandardSlidable suction hoodStandardHydraulic centralizer
Guide shell
StandardAuto throttle control for impact and air flow
Standard2 boom speedStandardManual over-ride for rod changerStandardJoystick controlled rod changer
Standard2 travelling speed
StandardAnti-jamming system for rotation pressure
OptionalSinter-Lamellar filter
Dust collectorOptionalLifting eyes for transportation
OptionalAuto air release valve for compressorStandardPre cleaner for engineStandardWater separator for engineOptionalBumper baseOptionalLadder for access rear engine coverOptionalHeavy duty under coverOptionalTool boxOptionalHour meter for drifterStandardHour meter for engineOptionalEmergency shut down systemOptionalWater tank for water injection system
Optional3 Dimensional electric angle indicator withdrilling depth and inclination
Optional3 Dimensional electric angle indicatorOptional2 Dimensional electric angle indicatorOptionalGuide swing angle indicator by pendulumStandardGuide tilt angle indicator by pendulum
Others
StandardBack-up AlarmStandardAutomatic equalizer lock
StandardAnti-jamming system for air pressureStandardAnti-jamming system for air flowStandardActive Dual-DamperStandardIntegrated Drilling System IDS
OptionalLever-operated switch for Boom controlStandardPush switch for Boom control
ControlStandardEvacuation hammerOptionalFolding CatwalkStandardCatwalkOptionalAdditional lights 70Wx2OptionalRear View Monitoring Camera color)OptionalRear View Monitoring Camera Black/white)StandardSeat beltStandardLevelerOptionalRotating light YellowStandardAir conditionerStandardSide door mirrorOptionalIntelligent Monitoring System-2OptionalIntelligent Monitoring System-1StandardAM/FM RadioStandardSuspension seat
StandardExhaust shutterOptionalFolding bracket for pre-cleaner
OptionalSingle shoeStandardTriple shoe
OptionalReverse Percussion
StandardPre-cleaner
Undercarriage
StandardDual-Damper SystemStandard
Cab
HD715DrifterUnit
HD715Model
3,480 mmTrack length
CATERPILLAR╟ C9Make & Model
2Variable displacement piston pump
PDSF290-S15B (AIRMAN)Model
JE326-142Model
GH831-41Model
40 m3/minSuction capacity
6Loaded rod capacity
89 - 127 mmRecommended bit diameter
17,820 kgOperating weight with ROPS/FOPS cab
11,185 mmOverall length (transportation)
OptionRotator
Weight & Dimensions
2,780 mmGround contact length
8,000 mmLength
Extendable boomType
1Control lever
Hydraulically operated chain driveFeed type
Right 38° Left 38°1,500 mm
31 kNMax. rod pull force
Starter rod (Max)Length of rodSize of rodType of bit
Bit & Rod
Length of rod
Rod changerNumber of filter
Dust collector
Guide rotary angleGuide tilt angleGuide swingGuide slide lengthFeed length with R/PFeed length
Guide shellBoom extension lengthBoom swing angleBoom lift angle
BoomWorking air pressureFree air deliveryType
CompressorHydraulic oil tank capacityGear pump
Hydraulic pumpFuel tank capacity
Output / speed
Type
EngineGradabilityTraveling speedOscillating angleGrand clearanceWidth of shoe
UndercarriageNumber of rotationImpact rateWeight
DrifterOverall height (transportation)Overall heightOverall width (transportation)Overall width
Overall length
900 mmRight 38° Left 7°Up 45° Down 20°
4,270 mm (14 ft.)3,660 mm (12 ft.)
45R (T45),51R (T51)Cross, Button, Ballistic, Conical
3,660 mm (12 ft.)
6
90°170°
4,520 mm4,700 mm
1.03 MPa13.5 m3/min
Screw, 1-stage, forced oil lubrication
2,995 mm3,325 mm2,400 mm3,720 mm
10,010 mm
515 mm330 mm
261 kW / 2,200 min-1 Meets Tier-3and EU stage-3
240 L3
630 L (420+210)
Turbocharged and air to air aftercooled diesel,
direct fuel injection, electric governor
57.7% (30°)0 - 4.2 km/h
7.5°
0 - 150 min-1
2,150 min-1
250 kg