freedom lp3 4.17.09
DESCRIPTION
Freedom LP3Display all phones, MP3 players and portable navigations live and working, having MTI's Freedom LP3 installed means:(3 month trial from install date) more up-selling less returns better customer experience more insight into customer's behavior in storeCheck here for a short video presentation http://www.mti-interactive.com/Company/virtual-store-tourTRANSCRIPT
Freedom LP3
Preliminary Product Information4/17/09
Freedom LP3
Advantages
•Mechanical
Retractor
•Small form factor
•Enhanced reliability
•Wireless Power &
Alarm
•Primary &
secondary sensors
Puck Details
1. LED light bar
2. Improved VHB pad
– 1.5x stronger than previous
pad/s
3. Primary sensor
– Same sensor switch as
current LP
4. Smart cable locking tab
5. Threaded insert anchor
points
– Used as anchors for custom
bracket mounting
– Used as anchor for puck lock
– Zip tie channel
2
3
1
5
4
LP3 Features and Benefits
Mechanical Retractor• Multiple options
- From: 1/8” heavy gauge steel for more cut resistance properties
- To: 3/32” lighter gauge steel for a simple mechanical tether
- Heavier custom gauge tethers available as special order
• Enhanced reliability with built in swivel function
• Eliminates use of powered retractor
• Extended retractor lifespan
LP3 Features and Benefits
Wireless Alarm/Power• Idle mode: (puck seated in base) The
puck and base have a series of electrical contacts that will charge the products on display
- Products charged through SmartCable
- LED will have constant glow in idle mode
• Active mode: (puck in consumer’s hand) The puck will stay powered and ‘wirelessly connected’ to alarm module via its internal battery
- Displayed product runs off its own battery
- LED will flash every 3 seconds
• A new ‘wireless alarm sensing’ feature
- Alarm will sound if puck is removed from wireless proximity area
• Glowing LED light bar illuminates entire face of puck
- Red is only color option
LP3 Features and Benefits
Supported product categories
• Mobile Phones
• MP3s
• PDAs
Additional features
• Built-in battery back-up- Uses rechargeable 9V battery
- Keeps system armed up to 36hrs per charge
• Built in ‘lift’ detection- No reedswitches or magnet needed
- Direct connect to UIM
• Compatibility with existing
SmartCables
• Micro-USB Secondary sensor- Same sensors as U2.0
• Mechanical only position option
LP3 Puck Lock
Click on image to play video
Locks puck directly to base
• Enhanced security
• Prevents direct access to
tether
Fully functional position
• Puck is still armed and provides
power/charge to device on
display
Available as full assembly for
ease of install
Future Accessories
Angled dome-style base
• Initial product release with flush/grommet base
• 30-degree angle base will follow
Entrance/Exit proximity sensor
• Wireless alarm box placed at entry/exit of retailer
- Alarm will sound when puck enters wireless proximity
- Will use same piezo buzzer as LP3 system
- Notifies store personnel of potential theft prior to
puck/product leaving store