frp cable ladders, trays and support system · developed a range of frp (fiber reinforced...

FRP CABLE LADDERS, TRAYS AND SUPPORT SYSTEM

Being first is good, being smart is better, being both is Simply the Best!

ISO 9001 2008 CERTIFIED

2

The perfect partner for your projects!

Simply the Best: This statement has followed us over the years as we developed into the unprecedented market leader in

multidiscipline support systems. This experience in smart cable supporting has since 1977 driven us to new levels

and many new and exciting products and projects. We have seen a major increase in our Research & Development

due to many different projects and special requirements from our clients.

A complete FRP system: We listen to what our customers say, and with this in mind and the demand for new

creative and unique products that last longer, reduce installation time and costly maintenance, we have

developed a range of FRP (Fiber Reinforced Polyester) cable ladders, trays and support. A preslotted system

to fit e.g. the Trefoil Smart Cleat, the ETIN tubing clamps etc., as well as other time saving accessories.

Total supplier: As a total supplier of cable management and multidiscipline support systems and of all types of

materials, with world wide references, our recommendations are trustworthy and focused.

You can be confident that when you re next in the market for a non metallic support system, the Oglaend

System FRP ladder, tray & support will be your best choice for value, ease of installation and technical quality.

Our main factory and headquarters in Norway (left) and our Malaysia factory (right).

Below is our fabrication facility in Malaysia where the FRP systems are engineered and fabricated in large scale.

Our unique FRP design: We have designed our FRP system based on the same concept that made us the

unprecedented market leader from supplying the Oil and Gas Industry on the North Sea shelf for 3 decades.

This environment represents one of the harshest test conditions possible and our cable management systems

have passed the test of time, and documented installations can be found in our reference lists and at major Oil

and Petrochemical companies around the world. This is why our FRP system is Simply the Best!

3

Cantilever Wall Brackets page 39

NEW!NEW!

NEW!NEW!

Cable Ladder FOE-70For general industrial applications

Supports for Ladders/Trays

Page 12

8

Contact Oglaend System Sales Office for more information and availability or visitwww.oglaend-system.com

Page 9

Oglaend System have developed a resin formula for the range of ladder & trayproducts called OLSTAR, that meets or exceeds the most stringent low flame,smoke & toxicity standards in the market today. Selected products are ABS & DNV approved for offshore and marine applications. Other applications such as tunnels, mass transit, enclosed areasor needs where low flame, smoke and toxicity levels are critical, will benefitfrom our OLSTAR system and it carries the most up to date third party testcertification from recognized test centres worldwide.

NEW!NEW! OLSTAR

SYSTEMOLSTAR

SYSTEM FRPfromOglaend Industries Malaysiawww.oglaend-system.com

FRP contents: Page

NEW and APPROVED products in this edition:

A new generation FRP in the market 4

The Pultrusion Process 4

From Concept to Installation 5

Oglaend System AdvantagesPreslotted Trays and Ladder Rungs, The Noni Principle, Patented locking Rung, Self-Lock vibration proof Fasteners 6

FRP Product Features 8

Specification Data Test and Standards for FOE & FTE Ladder and Tray 8

Project References 10

Cable Ladder type FOE Elbows, Covers, Dividers, Splice Connectors, Risers, Drilling Jig and Accessories. 12

Cable Tray type FTE with Elbows, Risers, Covers, Dividers, Splice Connectors, Drilling Jig and Accessories. 24

Load & Deflection Data 29

Support System type FRP with Splice Connectors, Drilling Jig and Accessories. 30

MultiGrid™ Installation Guide 32

FRP channels 34

Special Screws for FRP Products 42

Accessories Screws, Nuts and Bolts 43

Chemical Exposure Chart 44

Installation Guide (NEMA FG-1) 45

Oglaend System main Catalogues 46

Worldwide Locations 47

MultiGrid™ FRP Support System Electro / Instrument / Telecom MultiGrid™ FRP Support SystemElectro / Instrument / Telecom

Discipline guide:

E, I & T

MultiGrid™

4

OUR FRP PRODUCT LINE A new generation in the market

When we designed this new cable management and multidiscipline support system we had one thing in mind:

To be Simply the Best, also in FRP products. With more than 30 years of experience as world leader in the sup-

ply of cable support systems we evaluated market trends, customer requirements, design and cost factors.

With all this in mind we have created a full range of products that are user friendly, cost efficient and offer a

unique high strength solution in the market today. Combined with creative user friendly fittings and smart

accessories you can see why Oglaend System is Simply the Best!

Gunnstein Austigard, the founder of OglaendSystem, is at the helm of the concept anddesigns once more. He is here seen to the left participating withFraser Campbell, Managing Director of ourMalaysian manufacturing operation planningand designing our new range of FRP.

Arne Gya and Stian Knudsen in the R&Ddepartment to the right.

Pultrusion is a continuous process of roving, or mat/ roving bundles, which are drawn through a resin impregnated bath to coat each fiber with a specially formulated resin mixture. The impregnated fibers are thendrawn through a heated die which forms the desired cross section. Curing of the thermosetting resin is initiatedby heat in the die and catalyst in the resin. The rate of reaction is controlled by heating of the die. The resulting high unidirectional strength profile is cut to length and is ready to be used in the Oglaend SystemFRP Cable Management and Multidiscipline Support system.

The pultrusion process overviewRoving

Resin bath

Continuous matsand surface veil

Pre-molding and finish-molding

PullingCutting

Process controleHeated

die

5

Patents and design applications.Many of Oglaend System s products are patented or protected by design applications.

A complete list is available on request.

Subject to minor changes without notice.Check our website for latest issues.

The British Gas Tapti-project at site where FOE-150 cable ladders were installed as standard, and including some special designed solutionsto complete the client s tasks.

FROM CONCEPT TO INSTALLATION

Our standard riser using 45° splice angle plate.

See our riser buildingprinciples using 22.5°, 30° and 45° splice angleplates on page 17 and standard risers on page 19. The vertical hinge allows

free adjustments in steps of4°. See both page 6 and 16.

Study the variousfixing clamps on page 22.

Standard Tees are easily assembled

in any combination of widths need.

Simply the Best: Encouraged by the market response to our new line of FRP products which took one year from concept to

installation, Oglaend System secured the first of many big orders in 2006, one being British Gas Tapti.

From the start of engineering the client and EPC contractor could clearly see numerous benefits not just from a

cost point, but more importantly from an engineering/installation point as this project had limited space and the

requirement for flexibility was the key to a successful installation. BG Tapti used Oglaend System's FOE150 heavy

duty ladder and most of the unique Oglaend System accessories. Some of these items can be seen below.

Using smart solutions from Oglaend System can reduce cost and aid installation and together with our satisfied

customers, also you will find that our engineering/design team has managed to develope a well known technology

into Simply the Best!

When referring to pultruded products there is no difference between FRP and GRP.

6

The ADVANTAGES of Oglaend System FRP Products

Our anti-vibration locking system and our patented SmartLok composite insert which isheat resistant, fire retardant and halogen free, means no mess, no fuss, no glue, just a quickclean and simple installation. We are confident that if you use this system, you will see the advantages for yourself.

Preslotted trays and ladder rungs

Trim Edge.Used to preventcable snagging.

Cover Snap Lock for all FTE trays

Survey ETIN, SmartCleat and Cable ties catalogues on page 46.

Unique I beamdesign for betterloading capacityand cross sectionstability.

The pre-slotted design eliminates costly and time consumingdrilling and the channel type profile ensures that no liquid retention is possible. Ensuring a longer service life.

Trim Edge. Restricts movement of ladder rung vertically and adds rigidity.

Our PATENTED channel with its built in trim edge helps reduce the risk of cables being snagged or cut,and prevents the rung from moving vertically during assembly.

This profile design of Oglaend System adds more overall structural rigidity than any other product in themarket today.

The patented Noni principle 9/10-holes for hinges, connectors and risers.

Study ourSmart Jigs for easy splice connections

The combination of the holes give adjustment possibilities in 4° steps.

Page 22 for LaddersPage 28 for BendsPage 37 for Support

Reduce installation costs and time by:

Longer spans between the supports. Snap on Lids.Flexible fitting.Quick locking antivibration nuts.Apply Oglaend System�s Smart technology.

.....

4° steps

The pre-slotted design saves drilling time.Trefoil SmartCleat fits all ladders.

Flexi around every obstacle

ETIN tubing clamp fits alltrays and ladders and canbe easily snapped on.

FOE-70

FOE-100

FOE-150

Channel / Gusset plate T

TENSILE LOAD

Anti Vibration SolutionUse Oglaend System’s self-locking flange nut when mounting splice plates to our FRP ladder or tray system. This prevents joints from loosening in case of vibration.

Ask for separate brochure or download at www.oglaend-system.com

FRP self-lock system includes vibration-proof bolt sets

7

Our patented SmartLok rung insertWith it s fire retardant, low smoke halogen free properties,this clip with its glass reinforced sides fits neatly into therung by simply squeezing the end of the clip together andpushed into the rung.

The clip is locked into place by the glassreinforced taps on each side, and thescrew is then inserted through the channelinto the clip, preventing any type of pull out.

Finally the trim edge on the ladder profilewill fix the rung in position and preventany rung rollover when pulling cables.

Tensile loading on Side Profile: FOE-150 NR LadderAlways striving to be Simply the Best, Oglaend Systemimproving product wherever possible and on recent tests ourladders achieved a point loading of over 480kgs with rungand SmartLok insert still intact and functional.

TRADITIONALThe nut is moveable during vibrations because of side wards thread gap.

OUR STANDARD:The nut is locked during vibrations because all thread contact stops side wards movement.

Self-Locking Screws withsafe flange nuts

in SSSelf Lock Nut

All metal Lock nut

Standard Nut

Pre

ten

tio

n k

N

45.4

40.8

36.3

31.7

27.2

22.7

18.1

13.6

9.0

4.5

010 20 30 40 50 60 70 80 90 100 110

Time (seconds)

Vibration test diagram

8

HIGH STRENGTHHigher strength than structural steel on a weightto weight ratio. ASTM D-638 / ASTM D-695

IMPACT RESISTANTReturns to original position without any permanent deflection or distortion. ASTM D-256 / IEC 60068-2-75

LIGHT WEIGHTFRP pultrusion is lightweight, on average 15 to 20% that of steel products

CORROSION RESISTANTPultruded products are not susceptible to rusting, pealing or flaking and are impervious to a broad range of corrosive elements.

NON-CONDUCTIVEGlass reinforced pultrusions have low thermal conductivity and are non-conductive. ASTM D-149 / ASTM D-495

ELECTRO-MAGNETIC TRANSPARENCYPultruded products are transparent to radio waves, microwaves and other electromagnetic frequencies.

DIMENSIONAL STABILITYThe coefficient of thermal expansion of pultruded products are marginally less than steel and aluminum.

LOW TEMPERATURE FRP has excellent mechanical properties at low

temperatures.

FIRE RETARDANCYAll products used in the construction of ladders and trays are manufactured in accordance with ASTM-E84 class 1 & BS476 part 7 class l and ll. Self extinguishing to UL94 V-0 under test procedure ASTM-D 635.

ULTRAVIOLET STABILITYAll pultruded products contain an ultraviolet inhibitor, this is further complimented with an external surface veil. ASTM D570 / BS 2782 M552A / ASTM G154

WEIGTH AND SHIPPINGOur versatile system is light weight and can be flat packed to reduce expensive shipping costs.

HALOGEN FREEOur products are Rated Zero Halogen according to IEC60754.

SURFACE & VOLUME CONDUCTIVITYOglaend have a full range of ladder and tray products that are conductive and are tested in accordance to ASTM D-257.

Specification data for Oglaend System FOE and FTE ladders & trays

FRP product features

INTERNATIONAL STANDARDSCable ladder and tray system should comply with the teststandards that follow:

1. FRP LADDER AND TRAY SYSTEM SHALL CONFORM TO:

FIRE PERFORMANCESpread of Flame: BS 476 part 7 class l (Acrylic)

BS 476 part 7 class l (Polyester) BS 476 part 7 class II (Polyester)ASTM E 84 class lIEC 60092-101

Fire Propagation: BS 476 part 6 (Polyester)(Acrylic)ASTM-D 635

Smoke & Toxicity: IMO Resolution MSC61 (67) Annex 1, part 2 BS6853:1999 panel test BS6853:1999 Annex B, B.1

Self Extinguishing: UL94-VO Halogen free: IEC60754-1

MECHANICAL PERFORMANCENEMA FG1 Loading FOE-70 = Nema ’12A’

FOE-100 = Nema ’16A’FOE-150 = Nema ’20C’IEC 61537

Accelerating Aging: BS 2782 M552A ASTM G154 Water Absorption: ASTM D570 Impact load: IEC 60068-2-75Barcol Hardness: ASTM D2583Tensile Stress: ASTM D 638

ELECTRICAL PERFORMANCEVolume Resistivity: ASTM D257 Surface Resistivity: ASTM D257 Dielectric Strength: ASTM-D 149

OTHERSDensity: ASTM-D792

2. ULTRAVIOLET (UV) Pultruded products shall have an integral chemical additive to help to mitigate discoloration and a surface veil will help to prevent glass fiber exposure, thus maximizing total UV protection.

3. FLAME SPREADAll composite materials shall be fire retardant and have aflame spread rating in accordance with ASTM E-84 class I or BS476 part 7 class 0, l & II.

4. RESIN SYSTEM Color Code1. ISO Polyester class l code (C1) RAL 70402. ISO Polyester class ll code (C2) RAL 70403. Vinyl ester code (VE) RAL 70404. OLSTAR acrylic system code (AC) Natural & Black

Our standard systems are for ladders C1, trays C1 and C2.

5. MATERIAL CONTENTa. Glassfibre to resin ratio shall be maintained between

45-65 % by weight in all pultruded components. b. Flat sheet shall be 40-50%

9

11. PHYSICAL PROPERTIESStraight Ladder section shall be pultruded glass reinforcedwith a premium resin system:

a.Our ladder and tray members have been designed specifi-cally to optimize the load capacity in the form of a beam section. This UNIQUE style has in addition two importantadvantages, the first being the way our splice plate fits flush and tightly between the flanges (see detail “a”) thus preventing the plate from slipping at time of installation. The other is our patented rung to lad-der attachment where the rung fits neatly between two flanges and locked using our patented insert (see detail «b»).

b.Rung to side rail member connections shall be connected by a fire retardant (UL94 VO halogen free) composite locking clip. The rung to side rail mechanical connection shall resist both vertical shear and rung pullout.

c.The height of the rung is 24mm to maximize cable installations.

d. All Rungs have perforations along the length to aid easyinstallation of cables.

e.All sections are able to use Oglaend System ETIN tubing clamp and TREFOIL SmartCleats andother fixing accessories.

f. Straight sections of ladder and tray are predrilled to accept connector plates.

g. All cut ends and drilled splice plate holes are sealed prior to goods leaving factory.

12. ANTI STATIC – ASTM D257All products can be supplied with Anti Static Properties ranging from Surface resistivity 106 to 1010 and for VolumeResistivity 105 contact Oglaend System for further details.

13. OGLAENDS OLSTAR SYSTEM: LOW FLAME SMOKE/TOXICITY RESIN SYSTEM

OLSTAR system provides the best low flame, smoke /toxicitysolution for marine and petrochemical application. Tunnel,mass transit and building projects to name a few would greatly benefit from our system due to its low flame, smoke/toxicity properties.

OLSTAR system is available in two formulations, ABS/DNVpetrochemical applications and the other is infrastructureprojects where we can maximum performance to meet application.

Contact Oglaend System today for more information.

6. LADDER SIZESa. Ladder Heights: 70, 100, 150mm.b. Ladder widths: 150 through to 900mm. c. Ladder lengths: 3m & 6m.d. Rung Spacing is 300mm (other sizes available)e. Radius of Fittings: 300mm is standard.

600 & 900 on request. Fittings shall be mitered type. d. No molded or pressed fitting are acceptable as they

would not comply with loading specification.e. All ladder rungs are perforated as standard.

7. CABLE TRAY SIZESa. Widths: 50, 100, 150, 200, 300 & 400mm.

For sizes greater than 400mm contact Oglaend System.b. Depths: 50 and 80mm respectivelyc. Tray covers are self locking and clip on type.d. All trays will be perforated at 300mm centers.e. Radius of Fittings: 250mm is standard.

8. LOADING REQUIREMENTSa. There are three working load classifications

for FRP cable ladder based on (20’) supportspans with a minimum safety factor of 1.5.

Class Working Load (Nema)A 50 Lbs./Lineal Ft or (74 kgs/mt)B 75 Lbs./Lineal Ft or (111 kgs/mt)C 100 Lbs./Lineal Ft or (148 kgs/mt)b. Span support criteria shall be as specified

(reference the following table)

Support Span (Ft.) Working Load in Lbs./Lineal Ft.

Class A Class B Class C20 50 (74kgs/mt) 75 (111kgs/mt) 100 (148kgs/mt)18 61 92 12316 78 117 15614 100 150 20012 139 208 -10 200 - -* Independent test reports are required to substantiateNEMA FG 1 load criteria.

9. IEC LOADINGOglaend system offer a range of ladder and tray productsthat are IEC 61537 certified by DNV which offer a SafeWorking Load x 1.7. Contact us for more information.

10. CONNECTOR PLATES AND FASTENERSa.Splice plates are in Stainless Steel AISI 316L or in FRP

designed with sufficient strength to suit all applications. b.ANTI VIBRATION SOLUTION. All splice plates are

attached to the FRP ladder and tray using the Oglaend System self-locking bolt and safety nut.

c.Fasteners for ladders are 10mm diameter for splice plates and 8mm for the rung fixing detail.

d.Fasteners for trays are 6mm diameter.

a

b

«b» is describedin detail on

page 7.

Test andStandards

Our test database iscontinually being

improved, so please contactOglaend System

for our latest test data.

Elkem Solar, Norway. The silicium production facilities represent a highly corrosive environment where our FRP Support System was approved.

10

Close cooperation with consultants, contractors and customers ensures smoother transition from the engineering/

design to installation, will in most cases bring cost saving benefits across the project. Then the long and

maintenance free life of the Oglaend System FRP products offer as standard can be added.

Project references

Al Shaheen

Power Station in the Middle East

The Palm Jumeirah Island, Dubai

11

Client Project Location ProductAdyard Indago Abu Dhabi FOE-150 ladders, traysAdyard Maersk Abu Dhabi FTE-50-300 tray fittingsArabian Falcon Adyard Abu Dhabi FTE TraysGulf Piping Offshore Abu Dhabi FOE-100 ladders, fittingsMaersk General products Abu Dhabi FOE ladders (Nema 20C) NPCC Maersk Abu Dhabi FOE ladders and FTE trays, fittings (Nema 20C)Leonard Electrics State Aquatic Centre Australia FOE70Alfasi Desalination Plant Austrailia FOE70Downer EDI SSJV Desalination Plant Australia FOE Ladder, fittings HD supportsSouthern Cross Electrical Pigment plant upgrade Australia FOE100 LadderBP Accommodation Azerbaijan FOE-100 ladder, fittingsBelWind Transformer Platform Belgium FOE Ladder, FTE Tray, FRP SupportLondon Array Transformer Platform Belgium FOE, FTE, FTE Antistatic, FRP SupportConoco Philips RUP Bohai Bay China FOE-150 ladders and fittings

WHP, D,E,F Bohai Bay China FOE-150 laddersETS Track Boulevard Tunnel Denmark FOE-70 LaddersSemco Maritime Horns Rev 2 Accommodation Denmark FOE ladders and FTE traysAlderley FZE Various project Dubai/ UK FTE trays, fittingsBK Gulf Atlantis Dubai FOE-100 ladders, FTE trays & fittingsBK Gulf Palm Island Dubai FOE-100 ladders, fittingsBK Gulf Palm Interchange Dubai FOE-100 ladders, fittingsChalmers Tapti project Dubai FTE trays & fittingsCumberland Electro Services DPE Fateh Dubai FTE TraysDanway Electrical DUBAL Dubai FTE trays and fittingsDubai Petroleum General projects Dubai Various FTE traysHydrolink Al Shaheen Dubai FTE TrayInnovative Technology Various project Dubai FTE TraysJR McDermott Maersk Dubai FOE ladders and FTE trays, fittings (Nema 20C)Kaz Intertrade Oil & Gas Dubai FOE ladders Lamprell Various project Dubai Etin clamps, FTE trays, FOE ladders.Lamprell Gulphino Dubai FTE trays, Metito Oil & Gas Dubai FTE trays SBM FPSO Dubai FOE-150 ladders (Nema 20C)SEMCO Maritime Various project Dubai All productsSuliman Petrotech Oil & Gas Dubai FTE traysBritish Gas India Tapti project India FOE150 ladders (Nema 20C)Aqua Treat Oil & Gas Jordan FTE trays JV Inkai Petrochemical plate Kazakhstan FOE-150 ladders and fittingsSime Darby Maersk Malaysia FOE ladders and FTE trays, fittings (Nema 20C)Sime Darby Maersk Malaysia FOE-150 ladders (Nema 16B)Sime Darby Kumang Cluster Malaysia FOE-150 ladders, fittings and FTE trays DONG Energy Transformer Platform Netherland FOE Ladders Hemworthy Pazfloor FPSO Norway FTE TraySiemens Norsk Hydro Norway FOE100 ladders, FTE trays and FRP support Cegelec New Doha Airport Qatar FOE-100 LaddersKentech Qatar Technical Services Qatargas II Qatar FTE TrayMaersk Project at Adyard Qatar FOE-150 ladders and FTE trays (Nema 20) Mw Kellog Shell Pearl Qatar FOE ladders and FTE trays (Nema 20C)Occidental Offshore, tie -in Qatar Various FTE traysProchem Engineering Oil & Gas Qatar FOE ladders Qatar aviation fuels Jetty area Qatar FTE-150 laddersQatar Kentz Qatargas Qatar FOE-150 LadderQatar Petroleum Jetty area Qatar FOE ladders (Nema 20C)Washington Group International Qatargas Qatar FTE TrayAcciona Infraestructura Adriatic LNG Spain FOE-100 ladders, fittingsViny Thai Windmill, Chemical plant Thailand FRP Tray PTTEP Montara Thailand FRP/Ladder Tray PTTEP Bongkot Thailand FRP/Ladder Tray PTTEP Arthit (Maintenance) Thailand FRP/Ladder Tray Pearl Oil PPB2 Power System Thailand FRP/Ladder Tray Seatrax uk AL Shaheen UK FTE trays for the cranes constructionAcciona Croydon Tunnels UK FTE-50 & FOE-100British Fuels Not available UK FTE trays & fittingsFabricom Liverpool Dock UK FTE-50, FOE-100 & Supports.Farebrother Thorton Bio Waste UK FTE-50, FOE-150 & SupportsGoodwin & Price Birmingham Queensway UK FTE-80 & Supports

12

CABLE LADDER FOE

3000 mmLoadingdepth H: 71

300

B

A100

3000 mm

300

BA

70

Loadingdepth H: 46Ladder supplied with

4 perforated and 6 un-perforated rungsas standard

Cable Ladder FOE-70 Nema Rated to 12A

For general industrial applications Type B A (mm) C2 Art. no.: Kg/m

FOE-70 CL-150-3 168 73700 2.0FOE-70 CL-200-3 218 70300 2.1FOE-70 CL-300-3 318 73701 2.4FOE-70 CL-400-3 418 70301 2.6FOE-70 CL-450-3 468 73702 2.8FOE-70 CL-500-3 518 70302 3.0FOE-70 CL-600-3 618 73703 3.1Also available with closed rungs, for food process or other clean orwet room applications.FOE-70, related fitting and accessories are supplied in C2, otherresins are available on request. Longer lead times may apply.

Cable Ladder FOE-100 Nema Rated to 16A

Type B A (mm) C1 Art. no.: Kg/m

FOE-100 CL-150-3 176 74429 3.4FOE-100 CL-300-3 326 74430 3.8FOE-100 CL-450-3 476 74431 4.1FOE-100 CL-600-3 626 74432 4.5FOE-100 CL-750-3 776 74433 4.8FOE-100 CL-900-3 926 74434 5.2


Product selection & options

FOE Ladder range Standard Range Product Option on Request Resin Code

Material Polyester Class 1 (C1) a. Polyester Resin Class 2 C2FOE-70, supplied standard in C2

b. OLSTAR system, low flame, smoke & toxicity resin* ACc. Vinyl ester VE

Length 3mts 6mts (special sizes between 3 and 6 mts are possible )Width 150-900mm 1000-1200mm (only on selected products) Height 70,100 & 150 200mmRung spacing 300 120-500mmAssembly SS bolt sets with anti vibration

locking nut washer Splice detail Full height SS/FRP splicing details Elbow Radius 300mm 450-600 & 900mmAngles 45 or 90 30 or 60

*) OLSTAR acrylic system ABS approved with anti static properties

NOTE:For standard products just select the article number below.Loading: See page 29. Chemical Guide : See page 44.Ladder accessories: See page 13-23.Nuts and bolts: See page 42 and for full range 43.

GUIDELINES: To change resin system: Select resin code and add to article no.Example: Polyester Resin Class 2 = Art. no. 74429C2C1 = Standard, resin code not required.

4(8)M10x20

This symbol tells you that the productis supplied with stainless steel boltsets and locking nut washers.(In brackets are options).

NEW!NEW!

Loading depth Height

FOE-150 GA*

FOE-150 NR**

FOE-100

FOE-70

*) General Application

**) Nema Rated

150 mm

100

70

121 mm

71

46

13

Any questions?For further information, please contact us! Smart solutions come from close cooperation.

Cable Ladder FOE-150 Nema Rated to 20C

Type B A (mm) C1 Art. no.: Kg/m


FOE-150 CL-150-6m 176 74752 6.3FOE-150 CL-300-6m 326 74753 6.6FOE-150 CL-450-6m 476 74754 7.0FOE-150 CL-600-6m 626 74755 7.4FOE-150 CL-750-6m 776 74756 7.7FOE-150 CL-900-6m 926 74757 8.1

Cable Ladder FOE-150 GA For general heavy applicationType B A (mm) C1 Art. no.: Kg/m

FOE-150 GA-CL-150-3 176 70264 4.9FOE-150 GA-CL-300-3 326 70265 5.2FOE-150 GA-CL-450-3 476 70266 5.6FOE-150 GA-CL-600-3 626 70267 6.0FOE-150 GA-CL-750-3 776 70268 6.3FOE-150 GA-CL-900-3 926 70269 6.7

Availiable in 6m section

FOE-150 GA fittings just add GA to art. no.

Flat Elbows 90° R300Type C2 Art. no.: Kg

FOE-70 FE-90-150-R3 73706 3.5FOE-70 FE-90-200-R3 70303 4.7FOE-70 FE-90-200-R3 73307 4.7FOE-70 FE-90-400-R3 70304 4.7FOE-70 FE-90-450-R3 73708 5.5FOE-70 FE-90-500-R3 73707 4.7FOE-70 FE-90-600-R3 73709 8.1

Type C1 Art. no.: Kg

FOE-100 FE-90-150-R3 74606 4.4FOE-100 FE-90-300-R3 74607 5.7FOE-100 FE-90-450-R3 74608 6.6FOE-100 FE-90-600-R3 74609 7.5FOE-100 FE-90-750-R3 74610 8.5FOE-100 FE-90-900-R3 74611 9.4


3000 mm

300

B

A

448.5

R

150

3000 mm

300

B

A150

CABLE LADDER FOE

Width

Loadingdepth H: 121

Loadingdepth H: 121

NEW!NEW!

Cross Type C2 Art. no.: Kg

FOE-70 CR-150/150-R3 73724 5.1FOE-70 CR-200/200-R3 70311 6.4 FOE-70 CR-300/300-R3 73725 6.1FOE-70 CR-400/400-R3 70312 6.9 FOE-70 CR-450/450-R3 73726 7.4FOE-70 CR-500/500-R3 70313 6.5 FOE-70 CR-600/600-R3 73727 8.4

Tee-Piece Type C2 Art. no.: Kg

FOE-70 TE-150/150-R3 73718 5.3FOE-70 TE-200/200-R3 70308 5.6 FOE-70 TE-300/300-R3 73719 6.2FOE-70 TE-400/400-R3 70309 7.0 FOE-70 TE-450/450-R3 73720 7.5FOE-70 TE-500/500-R3 70310 7.9 FOE-70 TE-600/600-R3 73721 8.5

14

Flat Elbows 45° R300Type C2 Art. no.: Kg

FOE-70 FE-45-150-R3 73712 2.2FOE-70 FE-45-200-R3 70305 2.6FOE-70 FE-45-300-R3 73713 2.9FOE-70 FE-45-400-R3 70306 3.1FOE-70 FE-45-450-R3 73714 3.4FOE-70 FE-45-500-R3 70307 3.9 FOE-70 FE-45-600-R3 73715 4.8

CABLE LADDER FOE

467

193.5

Width

377Width

Width

437

437

437

Width

Width




FOE-100 TE-150/150-R3 74506 6.5FOE-100 TE-300/300-R3 74507 7.5FOE-100 TE-450/450-R3 74508 8.8FOE-100 TE-600/600-R3 74509 9.9FOE-100 TE-750/750-R3 74510 11.6FOE-100 TE-900/900-R3 74511 12.8


FOE-100 CR-150/150-R3 70314 6.5FOE-100 CR-300/300-R3 70315 7.5FOE-100 CR-450/450-R3 70316 8.8FOE-100 CR-600/600-R3 70317 9.9FOE-100 CR-750/750-R3 70318 11.6FOE-100 CR-900/900-R3 70319 12.8


FOE-150 TE-150/150-R3 74512 11.1FOE-150 TE-300/300-R3 74513 12.3FOE-150 TE-450/450-R3 74514 14.0FOE-150 TE-600/600-R3 74515 15.4FOE-150 TE-750/750-R3 74516 17.4FOE-150 TE-900/900-R3 74517 18.9




FOE-150 CR-150/150-R3 70320 11.1FOE-150 CR-300/300-R3 70321 12.3FOE-150 CR-450/450-R3 70322 14.0FOE-150 CR-600/600-R3 70323 15.4FOE-150 CR-750/750-R3 70324 17.4FOE-150 CR-900/900-R3 70325 18.8

15

Splice connectorseparat order

Reducer part iscomplete with screws and FRP brackets

4M10x20

2M10x20

Reducer Part Splice connector to be ordered separately

Type Art. no.: Kg

FOE-70 RP-150 73730 0.8FOE-70 RP-200 70326 0.9FOE-70 RP-300 73731 1.0FOE-70 RP-450 73732 1.1FOE-70 RP-500 73733 1.2

Type Art. no.: Kg



CABLE LADDER FOE

Reducer CentralType C1 Art. no.: Kg

FOE-100 RE-300/150 70327 2.5FOE-100 RE-450/150 70328 2.6FOE-100 RE-600/150 70329 2.7FOE-100 RE-450/300 70330 2.7FOE-100 RE-600/300 70331 2.8FOE-100 RE-750/300 70332 2.9FOE-100 RE-900/300 71447 3.0FOE-100 RE-600/450 70333 2.9FOE-100 RE-750/450 70334 3.0FOE-100 RE-900/450 70335 3.2FOE-100 RE-750/600 70336 3.1FOE-100 RE-900/600 70337 3.3

Reducer Right Type C1 Art. no.: Kg

FOE-100 RE-R-300/150 70371 2.3FOE-100 RE-R-450/150 70372 2.4FOE-100 RE-R-600/150 70373 2.5FOE-100 RE-R-450/300 70374 2.5FOE-100 RE-R-600/300 70375 2.6FOE-100 RE-R-750/300 70376 2.7FOE-100 RE-R-900/300 71449 2.8FOE-100 RE-R-600/450 70377 2.7FOE-100 RE-R-750/450 70378 2.8FOE-100 RE-R-900/450 70379 3.0FOE-100 RE-R-750/600 70380 2.9FOE-100 RE-R-900/600 70381 3.1


FOE-150 RE-R-300/150 70382 4.3FOE-150 RE-R-450/150 70383 4.4FOE-150 RE-R-600/150 70384 4.5FOE-150 RE-R-450/300 70385 4.5FOE-150 RE-R-600/300 70386 4.6FOE-150 RE-R-750/300 70387 4.7FOE-150 RE-R-900/300 71452 4.8FOE-150 RE-R-600/450 70388 4.7FOE-150 RE-R-750/450 70389 4.8FOE-150 RE-R-900/450 70390 4.9FOE-150 RE-R-750/600 70391 4.9FOE-150 RE-R-900/600 70392 5.0


FOE-150 RE-L-300/150 70360 4.3FOE-150 RE-L-450/150 70361 4.4FOE-150 RE-L-600/150 70362 4.5FOE-150 RE-L-450/300 70363 4.5FOE-150 RE-L-600/300 70364 4.6FOE-150 RE-L-750/300 70365 4.7FOE-150 RE-L-900/300 71451 4.8FOE-150 RE-L-600/450 70366 4.7FOE-150 RE-L-750/450 70367 4.8FOE-150 RE-L-900/450 70368 4.9FOE-150 RE-L-750/600 70369 4.9FOE-150 RE-L-900/600 70370 5.0


FOE-150 RE-300/150 70338 4.7FOE-150 RE-450/150 70339 4.8FOE-150 RE-600/150 70340 4.9FOE-150 RE-450/300 70341 4.9FOE-150 RE-600/300 70342 5.0FOE-150 RE-750/300 70343 5.1FOE-150 RE-900/300 71450 5.2FOE-150 RE-600/450 70344 5.1FOE-150 RE-750/450 70345 5.2FOE-150 RE-900/450 70346 5.3FOE-150 RE-750/600 70347 5.3FOE-150 RE-900/600 70348 5.4

Reducer LeftType C1 Art. no.: Kg

FOE-100 RE-L-300/150 70349 2.3FOE-100 RE-L-450/150 70350 2.4FOE-100 RE-L-600/150 70351 2.5FOE-100 RE-L-450/300 70352 2.5FOE-100 RE-L-600/300 70353 2.6FOE-100 RE-L-750/300 70354 2.7FOE-100 RE-L-900/300 71448 2.8FOE-100 RE-L-600/450 70355 2.7FOE-100 RE-L-750/450 70356 2.8FOE-100 RE-L-900/450 70357 3.0FOE-100 RE-L-750/600 70358 2.9FOE-100 RE-L-900/600 70359 3.1

Simple left/right

Reducer Part

16

4° steps

FRPSS

SS

Stainless steel equipped with thepatented Noni principle with thecombination of the 9/10 holesgives adjustment in steps of 4°.

Used as:

Splice AngleBend by hand torequired angel.

Bolt set for FRP splice plates: FOE-70 = M6 x 16, 4 pcs

FOE-100 = M10 x 25, 4 (8) pcsFOE-150 & GP = M10 x 25, 4 (8) pcs

Composite bolt and nut sets are available on request.

6M10x20

4M6x16

4(8)M10x20

Flexi around every obstacle

Hinge Vertical for flexible riserType FRP Art. no.: Kg SS Art. no.: Kg

FOE-70 HV-SD 70402 0.2 0.5FOE-100 HV-SD 75036 0.3 74863 0.6FOE-150 HV-SD 75037 0.6 74865 1.1

Various riser solutions are listed next pages.

CABLE LADDER FOE

2M4.8x13

150

Combine to fit actual width

4M6x16

Exit Plate Combine to fit actual width

Type FRP Art. no.: Kg

FOE EX-150 74545 0.4

End CoverType FRP Art. no.: Kg

FOE-70 EC-150 73735 0.1FOE-70 EC-200 70393 0.2FOE-70 EC-300 73736 0.2FOE-70 EC-400 70394 0.2FOE-70 EC-450 73737 0.3FOE-70 EC-500 70395 0.2FOE-70 EC-600 73738 0.4

FOE-100 EC-150 74701 0.1FOE-100 EC-300 74702 0.2FOE-100 EC-450 74703 0.3FOE-100 EC-600 74704 0.4FOE-100 EC-750 74705 0.5FOE-100 EC-900 74706 0.7

FOE-150 EC-150 74707 0.2FOE-150 EC-300 74708 0.3FOE-150 EC-450 74709 0.5FOE-150 EC-600 74710 0.6FOE-150 EC-750 74711 0.8FOE-150 EC-900 74712 0.9

Splice Connectors Type FRP Art. no.: Kg SS Art. no.: Kg

FOE-70 SC 70396 0.2 70397 0.3FOE-100 SC 75051 0.3 74858 0.4FOE-150 SC 75045 0.5 74859 0.6

Spans up to 4 mts, 4 bolt sets are recommended.Spans above 4 mts, 8 bolt sets are recommended.

Splice Angle Horizontal /Expansion coupler in SSType FRP Art. no.: Kg SS Art. no.: Kg

FOE-70 SA-HO 70398 0.2 70399 0.3FOE-100 SA-HO 70400 0.3 74861 0.4FOE-150 SA-HO 70401 0.5 74862 0.6

When used as expansion coupler remember to:• Use bolts with “nylock” lock nuts in the 4x rectangular slotting

and do not tighten the nuts. • Place one coupler for approx 25m span to count for thermal expansion.

4 bolt sets included as standard

(8) bolt setsare optional

5M10x25

4(8)M10x20

4(8)M10x20

17

Riser PartType C2 Art no.: Kg

FOE-70 RI-PA-150 73741 0.8FOE-70 RI-PA-200 70403 0.8FOE-70 RI-PA-300 73742 0.9FOE-70 RI-PA-400 70404 1.0FOE-70 RI-PA-450 73743 1.1FOE-70 RI-PA-500 70405 1.1FOE-70 RI-PA-600 73744 1.2

Example: To build a riser in 22.5°, 30° or 45° select the relevantRiser Part (see art. no. above), then the matcing Splice Angle Plate. For full flexibility combine Riser Parts with the Hinge Vertical onpage 16.

How to use:Splice Angle Plates can be used to make 22.5°,30° and 45° risers very simply and quickly.2 plates are required to build one riser.

Special angle plates like 60° can also be offered.

Splice Angle Plates 45°/30°/22.5°Type FRP Art no: Kg SS Art no: Kg

FOE-70 SA-VE-45 70406 0.1 74190 0.1FOE-100 SA-VE-45 70407 0.1 74191 0.1FOE-150 SA-VE-45 70408 0.2 74192 0.2

FOE-70 SA-VE-30 70409 0.1 74193 0.1FOE-100 SA-VE-30 70410 0.1 74194 0.1FOE-150 SA-VE-30 70411 0.2 74195 0.2

FOE-70 SA-VE-22.5 70412 0.1 74196 0.1FOE-100 SA-VE-22.5 70413 0.1 74197 0.1FOE-150 SA-VE-22.5 70414 0.2 74198 0.2

45°

30°

22.5°

To build your own flexi riser:First select the correct riser part FOE-70, 100 or 150.Then select the required splice angle 22.5°, 30° or 45°depending on degree.

Factory built flexi risers see pages 18-19 for all dimensional details.

Building principle for RI = Riser. Study radius overview for installation measurements on next page.

Build your own flexible riser from the components below:

-R4For small radius4 pcs Splice Angle plates of 45° between ladders and 1 Riser Partgive fixed riser angel of 90°.See table next page.

-R6For medium radius6 pcs Splice Angle plates of 30°between ladders and 2 Riser Parts give fixed riser angel of 90°.See next page.

-R8For large radius8 pcs Splice Angle plates of 22.5°between ladders and 3 Riser Parts give fixed riser angel of 90°. See next page.

Type C1 Art no.: Kg

FOE-100 RI-PA-150 74160 1.0FOE-100 RI-PA-300 74161 1.1FOE-100 RI-PA-450 74162 1.2FOE-100 RI-PA-600 74163 1.3FOE-100 RI-PA-750 74164 1.4FOE-100 RI-PA-900 74165 1.6

Type C1 Art no.: Kg

FOE-150 RI-PA-150 74166 1.9FOE-150 RI-PA-300 74167 2.0FOE-150 RI-PA-450 74168 2.1FOE-150 RI-PA-600 74169 2.2FOE-150 RI-PA-750 74170 2.3FOE-150 RI-PA-900 74171 2.4

18

CABLE LADDER FOEInstallation measurements between ladder ends at various riser radius.

-R4 -R6 -R8

Factory fabricated fixed risersFOE-100 Inside


FOE-70 Outside FOE-100 Outside

-R4 -R6 -R8

-R4 -R6 -R8

-R4 -R6 -R8

-R4 -R6 -R8

FOE-150 Outside


-R4 -R6 -R8

19

FOE-70 Riser 90° Outside Type Radius C2 Art no.: Kg

FOE-70 RI-OU-90-150-R4 393 73765 1.69FOE-70 RI-OU-90-200-R4 70424 1.72FOE-70 RI-OU-90-300-R4 73766 1.79FOE-70 RI-OU-90-400-R4 70425 1.86FOE-70 RI-OU-90-450-R4 73767 1.99FOE-70 RI-OU-90-500-R4 70426 2.02FOE-70 RI-OU-90-600-R4 73768 2.09



FOE-100 Riser 90° Outside Type Radius C1 Art no.: Kg

FOE-100 RI-OU-90-150-R4 393 74254 2.08FOE-100 RI-OU-90-300-R4 74255 2.18FOE-100 RI-OU-90-450-R4 74256 2.28FOE-100 RI-OU-90-600-R4 74257 2.38FOE-100 RI-OU-90-750-R4 74258 2.48FOE-100 RI-OU-90-900-R4 74259 2.68



FOE-150 Riser 90° OutsideType Radius C1 Art no.: Kg




CABLE LADDER FOE

Factory fabricated fixed risersFOE-70 Riser 90° Inside Type Radius C2 Art no.: Kg

FOE-70 RI-IN-90-150-R4 409 73747 1.69FOE-70 RI-IN-90-200-R4 70415 1.72FOE-70 RI-IN-90-300-R4 73748 1.79FOE-70 RI-IN-90-400-R4 70416 1.91FOE-70 RI-IN-90-450-R4 73749 1.99FOE-70 RI-IN-90-500-R4 70417 2.03FOE-70 RI-IN-90-600-R4 73750 2.09



FOE-100 Riser 90° InsideType Radius C1 Art no.: Kg

FOE-100 RI-IN-90-150-R4 434 74236 2.08FOE-100 RI-IN-90-300-R4 74237 2.18FOE-100 RI-IN-90-450-R4 74238 2.28FOE-100 RI-IN-90-600-R4 74239 2.38FOE-100 RI-IN-90-750-R4 74240 2.48FOE-100 RI-IN-90-900-R4 74241 2.68



FOE-150 Riser 90° Inside Type Radius C1 Art no.: Kg




Cable Ladder Cover for High wind application

Type C1 Art. no.: Kg/m

FOE CO-CL-150 71468 1.0FOE CO-CL-200 71469 1.15FOE CO-CL-300 71470 1.6FOE CO-CL-400 71471 2.15FOE CO-CL-450 71472 2.4FOE CO-CL-500 71473 2.7FOE CO-CL-600 71474 3.15FOE CO-CL-750 71475 3.9FOE CO-CL-900 71476 4.7

Cover Clamp For general purpose application

Type SS Art. no.: Kg

FOE CC 74856 0.1

20

CABLE LADDER FOE

7 x 20mm

7 x 20mm

1M6x16

Installation of the heavy duty clamp is quick and easy. All that is required once the cover is in position is to remove thenuts located on top of each side of the reinforcement ribs, thenhook the stainless steel clamp under the bottom flange of the ladderand lift clamp upwards so the slotted hole on top of clamp landsdirectly over the bolt and once in place apply the nut to secure.

Peak Cover for Cable Ladders

The recommended number of clamps is 8 per 3m ladder length.This clamp is used for high wind application and where ladder ispositioned at an angle.

The recommendednumber of clampsis 8 per 3m ladderlength. This type ofclamp is for generalapplications.

HD Cover Fixing ClampType SS Art. no.: Kg

FOE-70 CC-HD 71484 0.05FOE-100 CC-HD 71485 0.07FOE-150 CC-HD 71486 0.1

Supplied completewith profiles, rods and nuts.

Use this product in case of high wind exposure.

Height:Add 44mm toladder height

Used in extremehigh wind application. Cover Fixing Clamp

Type Width: FRP Art. no.: Kg

FOE-70-150 CC-HD 220mm 74309 0.45FOE-70-200 CC-HD 370 70433 0.51FOE-70-300 CC-HD 370 74310 0.62FOE-70-400 CC-HD 370 70434 0.74FOE-70-450 CC-HD 520 74311 0.80FOE-70-500 CC-HD 370 70435 0.86FOE-70-600 CC-HD 670 74312 0.97

FOE-100-150 CC-HD 220 74315 0.48FOE-100-300 CC-HD 370 74316 0.65FOE-100-450 CC-HD 520 74317 0.83FOE-100-600 CC-HD 670 74318 1.00FOE-100-750 CC-HD 820 74319 1.17FOE-100-900 CC-HD 970 74320 1.35

FOE-150-150 CC-HD 220 74321 0.56FOE-150-300 CC-HD 370 74322 0.72FOE-150-450 CC-HD 520 74323 0.89FOE-150-600 CC-HD 670 74324 1.06FOE-150-750 CC-HD 820 74325 1.24FOE-150-900 CC-HD 970 74326 1.41

Height = 119 / 144 / 194mm

Raised Peak Cover for Cable Ladder Type C1 Art. no.: Kg/m

FOE RPC-150 71372 1.4FOE RPC-300 71373 2.5FOE RPC-450 71374 2.9FOE RPC-600 71375 3.3FOE RPC-750 71376 3.7FOE RPC-900 71377 4.2

Reinforcing ribs, 5 per 3m cover.

21

CABLE LADDER FOE

Use 4 clamps per section

A A

A

A

B

90° = 3 sections 45° = 2 sections


Cover Flexi-Riser Type C1 Art. no.: Kg

FOE CO-FR-150 74760 0.3FOE CO-FR-300 74761 0.6FOE CO-FR-450 74762 0.9FOE CO-FR-600 74763 1.2FOE CO-FR-750 74764 1.5FOE CO-FR-900 74765 1.8

Use the same for inside and outside risers.

Cover Flat Elbow 90°Type C1 Art. no.: Kg

FOE CO-FE-90-150 74715 0.9FOE CO-FE-90-300 74716 1.9FOE CO-FE-90-450 74717 3.2FOE CO-FE-90-600 74718 4.6FOE CO-FE-90-750 74719 6.3FOE CO-FE-90-900 74720 8.1

Cover Flat Elbow 45°Type C1 Art. no.: Kg

FOE CO-FE-45-150 74801 0.6FOE CO-FE-45-300 74802 1.2FOE CO-FE-45-450 74803 2.0FOE CO-FE-45-600 74804 3.1FOE CO-FE-45-750 74805 4.1FOE CO-FE-45-900 74806 5.2

Cover Tee-Piece Type C1 Art. no.: Kg

FOE CO-TE-150 74721 0.8FOE CO-TE-300 74722 1.7FOE CO-TE-450 74723 2.8FOE CO-TE-600 74724 4.1FOE CO-TE-750 74725 5.7FOE CO-TE-900 74726 7.6


H

30

4M6x16

Divider 3m lengths for straight ladders

Type H mm FRP Art. no.: Kg/m

FOE-70 DI 40 73783 0.4FOE-100 DI 70 74541 0.5FOE-150 DI 120 74542 0.8

A full range of dividers are available for all horizontal fitting and allvertical fitting inside our outside radiuses.

22

CABLE LADDER FOE

A

40

11x20

65

Fixing Clamps Fits both ladders and trays


FOE/FTE FC-B47x50 74492 0.1



FOE/FTE FC-B40x65 74783 0.04

Used for vertical or horizontal installations.

11 x 20

Ø 11

Ø 7

Fixing/Expansion Clamp Type A mm FRP Art. no.: Kg

FOE FC-A40X65 6 71410 0.06

This clamp is suitable for the following products:FOE-150 NR , FOE-150 GA, FOE-100 and FOE-70.

Fixing Clamp/Beam ClampAllows ladder movement when under thermal contraction or expansionor as a hold down clamp using the Allen screw.


Expansion Guide beam clamp 75026 0.19Allen screw M6

1M10x20

1M10x30

Smart Jig Drilling jig for 10 mm holes


FOE-DJ70/100/150 74398 0.4

With this jig you can predrill holes in exact positions when cuttingladder lengths on site. After modifications use Oglaend SystemSealing Kit to preserve the product quality.

FOE ladders70100150

FOE-70 FOE-100 FOE-150

The Sealing Kits are suitable for all Oglaend Systems FRP products. For use after field modifications.

Sealing Kits Polyurethane sealer 1L Art. no.: Litre

Type FRP SK-2 74779 1

Ø 11

23

CABLE LADDER FOE

Rung spacing standard is 300 mm. Rung widths from 150mm to 900mmAsk for alternative rung spacing’s or resin systems.Order 10 rungs pr. ladder at standard space 300 mm (20 pr. 6m).

FOE Side ChannelType Art. no. 6m: Art. no. 3m: Kg/m

FOE-70 71453 74133 0.8FOE-100 71418 74136 1.4FOE-150 71454 74137 2.8FOE-150 GA 71456 71455 2.2

FOE Rung CW = Crosswise punched

Type P1 Art. no.: Kg

FOE RU-CW-150 74469 0.2FOE RU-CW-300 74470 0.3FOE RU-CW-450 74471 0.4FOE RU-CW-600 74472 0.5FOE RU-CW-750 74473 0.6FOE RU-CW-900 74474 0.7

FOE-70 Rung CW = Crosswise punched (P)

Type P1 Art. no.: Kg

FOE-70 RU-150 71544 0.10FOE-70 RU-CW-150 71544P 0.10FOE-70 RU-200 71545 0.12FOE-70 RU-CW-200 71545P 0.12FOE-70 RU-300 71546 0.16FOE-70 RU-CW-300 71546P 0.16FOE-70 RU-400 71547 0.20FOE-70 RU-CW-400 71547P 0.20 FOE-70 RU-450 71548 0.22FOE-70 RU-CW-450 71548P 0.22FOE-70 RU-500 71549 0.24FOE-70 RU-CW-500 71549P 0.24FOE-70 RU-600 71550 0.28FOE-70 RU-CW-600 71550P 0.28

«Build your own FOE ladder at site» Predrilled side channels in 70,100 or 150 heights, supplied in 3 or 6mt lengths for easy assembly at site. Rungs supplied preslotted, complete with the patented SmartLok insert and SS pan head bolts for easy assembly.

BG TaptiMearsk Al Shaheen

Maersk Al Shaheen

24

Cable tray FTE-50 Type B A C2 Art. no.: C1 Art. no.: Kg/m

FTE-50 CT-50 70 74400 74400C1 1.3FTE-50 CT-100 122 74401 74401C1 1.7FTE-50 CT-150 172 74399 74399C1 2.0FTE-50 CT-200 222 74402 74402C1 2.3FTE-50 CT-300 324 74403 74403C1 3.0FTE-50 CT-400 426 71460 71460C1 4.5

Cable tray FTE-80 Type B A C2 Art. no.: C1 Art. no.: Kg/m

FTE-80 CT-50 72 74410 74410C1 1.9FTE-80 CT-100 122 74411 74411C1 2.2FTE-80 CT-150 172 74409 74409C1 2.6FTE-80 CT-200 224 74412 74413C1 3.0FTE-80 CT-300 324 74413 74413C1 3.5FTE-80 CT-400 424 71461 71461C1 5.1

CABLE TRAY FTE

CABLE TRAY FTE

3000 mm

300 mm

3000 mm

50

80

BA

BA

Loading depth H: 47

Loading depth H: 77

50

Loading depth H: 47 80

Loading depth H: 77


FTE Tray Range Standard Range Product Option on Request Resin CodeMaterial Polyester Class 2 (C2) a. Polyester Class 1 with anti static C1A

Polyester Class 1 (C1) b. OLSTAR system, low flame, smoke & toxicity resin* ACc. Vinyl ester VE

Perforations Bottom Non perforated bottomLength 3mts 6 mtsWidht 50-100-150-200-300 and 400mm 500mm Height 50-80mmAssembly SS bolt sets with anti vibration

locking nut washers as standard Splice detail Full height SS/FRP splicing details Elbow Radius 250mm Alternative radiuses available on requestAngles 45 or 90 30 or 60

*) OLSTAR acrylic system ABS approved with anti static properties

NOTE: For standard products just select the article number below.Loading: See page 29. Chemical Guide : See page 44.Tray accessories: See page 24-28.Nuts and bolts: See page 42 and for full range 43.

FTE-50 FTE-80

4(8)M10x20


GUIDELINES: To change resin system: Select resin code and add to article no.Example: Polyester Resin Class 1 anti static = Art. no. 74400C1A

25

CABLE TRAY FTE

167.9

Order Splice AngleHorizontal below

Width

500300

237.5237.5

69.6

FRPSS

2M6x16

Flat Elbows 90°Type C2 Art. no.: C1 Art. no.: Kg

FTE-50 FE-90-50 74568 74568C1 0.8FTE-50 FE-90-100 74569 74569C1 1.1FTE-50 FE-90-150 74572 74572C1 1.3FTE-50 FE-90-200 74570 74570C1 1.6FTE-50 FE-90-300 74571 74571C1 2.2FTE-50 FE-90-400 71463 71463C 12.7

FTE-80 FE-90-50 74582 74582C1 1.3FTE-80 FE-90-100 74583 74583C1 1.5FTE-80 FE-90-150 74581 74581C1 1.8FTE-80 FE-90-200 74584 74584C1 2.1FTE-80 FE-90-300 74585 74585C1 2.7FTE-80 FE-90-400 71493 71493C1 3.2

Flat Elbows 45°Type C2 Art. no.: C1 Art. no.: Kg



TEE-PIECE Type C2 Art. no.: C1 Art. no.: Kg

FTE-50 TE-50/50 74660 74660C1 0.6FTE-50 TE-100/100 74661 74661C1 0.7FTE-50 TE-150/150 74659 74659C1 0.9FTE-50 TE-200/200 74662 74662C1 1.1FTE-50 TE-300/300 74663 74663C1 1.6FTE-50 TE-400/400 71465 71465C1 2.1

FTE-80 TE-50/50 74664 74664C1 0.9FTE-80 TE-100/100 74665 74665C1 1.0FTE-80 TE-150/150 74668 74668C1 1.2FTE-80 TE-200/200 74666 74666C1 1.4FTE-80 TE-300/300 74667 74667C1 1.9FTE-80 TE-400/400 71495 71495C1 2.9

Splice Angle HorizontalType FRP Art. no.: SS Art. no.: Kg

FTE-50 SA-HO-50 70436 74870 0.1FTE-80 SA-HO-80 70437 74871 0.2

All Steel(SS) accessories are supplied in AISI 316L.

Expansion splice plates for FTE trays are available on request.

Splice ConnectorsType FRP Art. no.: SS Art. no.: Kg

FTE-50 SC 75043 74880 0.1FTE-80 SC 75052 74881 0.2

2(4)M6x16

4M6x16

26

Combi-Riser Cover Combi-Riser see next page

Type SS Art. no.: FRP Art. no.: Kg

FTE-50 CR-50 74670 75046 0.9FTE-50 CR-100 74671 75047 1.0FTE-50 CR-150 74669 75039 1.1FTE-50 CR-200 74672 75048 1.2FTE-50 CR-300 74673 75049 1.4FTE-50 CR-400 71490 71490C1 1.6

FTE-80 CR-50 74674 75072 1.5FTE-80 CR-100 74675 75073 1.6FTE-80 CR-150 74678 75074 1.7FTE-80 CR-200 74676 75075 1.8FTE-80 CR-300 74677 75076 2.0FTE-80 CR-400 71496 71496C1 2.2

Splice Angle 45°Type FRP Art. no.: SS Art. no.: Kg

FTE-50 SA-VE-45 75041 74872 0.1FTE-80 SA-VE-45 75042 74873 0.2

The splice angle is available in standard 45° or 30° & 60°.Excellent for building risers on site.Use our pre-slotted drill Jig to drill new holes after cutting trays.Seal with Oglaend system resin for improved life span.

Cover FTE 3m length

Type C2 Art. no.: C1 Art. no.: Kg/m

FTE CO-CT-50 74450 74450C1 0.8FTE CO-CT-100 74451 74451C1 1.0FTE CO-CT-150 74449 74449C1 1.3FTE CO-CT-200 74452 74452C1 1.6FTE CO-CT-300 74453 74453C1 2.1FTE CO-CT-400 71462 71462C1 2.5

Cover Flat Elbow 90°Type C2 Art. no.: C1 Art. no.: Kg

FTE-50 CO-FE-90-50 74735 74735C1 0.4FTE-50 CO-FE-90-100 74736 74736C1 0.5FTE-50 CO-FE-90-150 74739 74739C1 0.8FTE-50 CO-FE-90-200 74737 74737C1 1.0FTE-50 CO-FE-90-300 74738 74738C1 1.5FTE-50 CO-FE-90-400 71499 71499C1 1.9

Cover Flat Elbow 45°Type C2 Art. no.: C1 Art. no.: Kg

FTE-CO-FE-45-50 74940 74940C1 0.2FTE-CO-FE-45-100 74941 74941C1 0.25FTE-CO-FE-45-150 74944 74944C1 0.4FTE-CO-FE-45-200 74942 74942C1 0.7FTE-CO-FE-45-300 74943 74943C1 0.75FTE-CO-FE-45-400 71500 71500C1 0.95

CABLE TRAY FTE

Suppliedas inside

riser. Justturn the spliceplates over tomake an outside riser.

For both in- and outside use

B

A

A C

C

4M6x16

2M6x16

Remember: Screws are included!Listed number screws before brackets are supplied stdr. with the parts.*Weights listed are without screws.

*) NB! In special conditions secure the set up with the listed number put in brackets.For order no. – see page 42.

4(8)M10x20

27

CABLE TRAY FTE

2M4.8x13

Height = 94 / 124mm

Cover Fixing ClampUsed in Extreme high wind application

Type Width: FRP Art. no.: Kg

FTE-50 CC-HD-50 130mm 73930 0.31FTE-50 CC-HD-100 180 73931 0.37FTE-50 CC-HD-150 230 73929 0.43FTE-50 CC-HD-200 280 73932 0.49FTE-50 CC-HD-300 380 73933 0.60FTE-50 CC-HD-400 480 71491 0.72

FTE-80 CC-HD-50 130 73934 0.35FTE-80 CC-HD-100 180 73935 0.41FTE-80 CC-HD-150 230 73938 0.47FTE-80 CC-HD-200 280 73936 0.53FTE-80 CC-HD-300 380 73937 0.64FTE-80 CC-HD-400 480 71497 0.75

Supplied completewith profiles, rods and nuts.

Height: Add 44mm to tray height.

Cover Clip Quick & Easy

Type SS Art. no.: Kg/m

FTE-50 CC 71352 0.01FTE-80 CC 71459 0.02

Cover ClampType SS Art. no.: Kg/m

FTE CC 74384 0.01

Cover Combi-RiserType C2 Art. no.: C1 Art. no.: Kg

FTE-CO-CR-50 74844 74844C1FTE-CO-CR-100 74845 74845C1FTE-CO-CR-150 74848 74848C1FTE-CO-CR-200 74846 74846C1FTE-CO-CR-300 74847 74847C1FTE-CO-CR-400 71531 71531C1

Cover Tee-PieceType C2 Art. no.: C1 Art. no.: Kg

FTE-CO-TE-50 74840 74840C1FTE-CO-TE-100 74841 74841C1FTE-CO-TE-150 74839 74839C1FTE-CO-TE-200 74842 74842C1FTE-CO-TE-300 74843 74843C1FTE-CO-TE-400 71530 71530C1

End CoverType FRP Art. no.: Kg

FTE-50 EC-50 74727 0.02FTE-50 EC-100 74728 0.04FTE-50 EC-150 74885 0.05FTE-50 EC-200 74728 0.06FTE-50 EC-300 74730 0.10FTE-50 EC-400 71492 0.12

FTE-80 EC-50 74731 0.03FTE-80 EC-100 74732 0.06FTE-80 EC-150 74886 0.08FTE-80 EC-200 74733 0.10FTE-80 EC-300 74734 0.20FTE-80 EC-400 71498 2.30

DividerType H mm FRP Art. no.: Kg/m

FTE-50 DI 45 74540 0.4FTE-80 DI 70 74541 0.5

28

FTE trays 8050

HH: 45 and 70 mm

4M6x16

3M6x16

30

CABLE TRAY FTE



FOE/FTE FC-A 74492 0.04



FOE/FTE FC-B40x65 74783 0.04

To be used for vertical installations.

Hinge Vertical Type FRP Art. no.: SS Art. no.: Kg

FTE-50 HV 75044 74882 0.2FTE-80 HV 75053 74883 0.3

Smart Jig Drilling jig for 7mm drill


FTE-DJ 50/80 74397 0.2

With this jig you can predrill holes in exact positions when cuttingtray lengths on site. After modifications use Oglaend System SealingKit to preserve the product quality.


Sealing Kits Polyurethane sealer 1 L Art. no.: Litre


5M6x16

11 x 20

Ø 11

Ø 71M10x20

Ø 11

Reducer part2M6x16

Reducer Part Type Art. no.: Kg

FTE-50 RP-50 70438 0.10FTE-50 RP-100 70439 0.12FTE-50 RP-150 70440 0.15FTE-50 RP-200 70441 0.17

FTE-80 RP-50 70442 0.15FTE-80 RP-100 70443 0.18FTE-80 RP-150 70445 0.20FTE-80 RP-200 70446 0.22

29

For all products: Actual deflection is less than restricted deflection D.

Uniformly distributed load in kg/m and deflection D in mm

Span L (m) 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6D = L/200(mm) 7.5 10 12.5 15 17.5 20 22.5 25 27.5 30Load (kg/m) kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m kg/m

FTE CABLE TRAYS C1 and C2

74400 - FTE-50-P-50 242 101 50 2874401 - FTE-50-P-100 314 131 65 3774399 - FTE-50-P-150 357 150 75 4374402 - FTE-50-P-200 386 161 80 45 2774403 - FTE-50-P-300 442 183 92 50 3074410 - FTE-80-P-50 745 314 160 91 57 37 2674411 - FTE-80-P-100 745 390 198 114 70 46 3274409 - FTE-80-P-150 745 444 226 130 80 53 3674412 - FTE-80-P-200 745 498 252 145 90 58 40 2874413 - FTE-80-P-300 745 555 281 160 100 65 43 30

FTE CABLE TRAYS VE

74400 - FTE-50-P-50 291 121 61 3574401 - FTE-50-P-100 378 157 80 4574399 - FTE-50-P-150 430 179 90 5274402 - FTE-50-P-200 465 194 97 55 3374403 - FTE-50-P-300 531 221 110 62 3874410 - FTE-80-P-50 900 379 192 110 68 45 3174411 - FTE-80-P-100 949 470 238 136 85 56 3874409 - FTE-80-P-150 950 533 271 156 98 64 4574412 - FTE-80-P-200 950 598 304 175 108 70 49 3474413 - FTE-80-P-300 950 667 338 193 120 79 54 38

FOE CABLE LADDERS C1 and C2

74133 - FOE-70 520 218 140 8274136 - FOE-100 1750 893 456 274 164 10974137GA - FOE150 GA 2852 1972 1134 654 409 290 190 13674137 - FOE-150 4997 3190 1835 1059 665 443 310 224 167 148

FOE CABLE LADDERS VE

74133VE - FOE-70 665 278 155 9074136VE - FOE-100 2236 1129 573 330 207 13774137GAVE - FOE150 GA 3815 2320 1373 791 497 330 230 16674137VE - FOE-150 6361 3723 2203 1272 799 533 373 270 201 154

FOE CABLE LADDERS OLSTAR

74133AC - FOE-70 Contact Oglaend System74136AC - FOE-100 Contact Oglaend System74137GAAC - FOE150 GA Contact Oglaend System74137AC - FOE-150 Contact Oglaend System

Load date shown above is theoretical only

LOAD & DEFLECTION TABLE FOR OGLAEND SYSTEM FOE CABLE LADDER & FTE TRAYS

30

SUPPORT SYSTEM FOR

FRP PRODUCTS

Our FRP support system offers a unique design concept

Being first is good, being smart is better, being both is Simply the Best!

31

The FRP Support System is simple, smart and fast,

whatever solution you require.

32

We offer welded starters

for whatever support solution

you need!

THIS IS HOW YOU GET STARTED:

Welded Starters

Increased load capacity

The Mekano™ Support Channels See the full range in our MultiGrid catalogue.

Choose channels according to the required load capacity

Choose starters according to the required load capacity

FOR HOT WORK


MultiGrid™ – The Most Complete

33

The FRP Support System is independent, still integrated in the MultiGrid™ steel concept

Cold WorkSolutions with FRP channels and parts.

Cold WorkStarting Bracketsfor Bolting andclamp on.Eliminate the need for HOT WORK.

Hot WorkStarting Brackets

for Welding.

The FRP Support Channels See full range on page 35.

The FRP system is a complete integrated MultiGrid™ option

We offer bolted starters

for whatever support solution

you need!


Choose starters according to the required load capacity

MultiGrid™ in FRP

Multidiscipline Support System

The FRP SupportSystem is securedto main structurewith various starterbrackets.See full range onpage 35.

Bolted Starters

FOR COLD WORK

The FRP Support Channelscombined with FRP or Steel Starters

give required load capacity.See page 34.


CH42-1Art. no.: 73632150 kg

Note: Use our Drill Jig to secure the holes inright position. See page 37.

CH42-1Art. no.: 73632550 kg

CH100-1Art. no.: 749911000 kg

CH100-1Art. no.: 749912500 kg

Load Data for max. Dead Weight vertical Safety 2.

34


FRP Channel Range Standard Range Product Option on Request Resin Code

Material Polyester Class 2 (C2) a. Polyester Class 1 C1Length 3 mts 6 mtsAssembly SS bolt sets with anti vibration

locking nut washer

NOTE: For standard products just select the article number below.Loading: See below. Chemical Guide : See page 44.Support accessories: See page 35-39.Nuts and bolts: See page 42 and for full range 43.

4(8)M10x20

SUPPORT SYSTEM IN FRP


Max bending moment for the bolted connection is 612 Nm.

Max bending moment for the bolted connection is 612 Nm.

Max “dead weight load” for each hanger is 2500 kg when use of 4pcs M10 bolt in each leg.

GUIDELINES: To change resin system: Select resin code and add to article no.Example: Polyester Resin Class 1 = Art. no. 74991C1C2 = Standard, resin code not required.

Point load

W

Deflection 3°

Point load

UDL load

Deflection 3°

Point load

W

H

W

Channel S-FRP CH100-1 Max load in kg

Safety factor x 2 included. Bolt dim. M10.Support Width = W

Channels* Point UDLW (m) Single/Double Load (kg) Load (kg)2.00 Single 140 1402.00 Double 345 3451.75 Single 172 1961.50 Single 245 3261.25 Single 312 499 1.00 Single 340 680

*) Only the horizontally channel is double (Back to back). All verticals are single.

Type U-Frame Load data for typical industrial support

Channel S-FRP CH100-1 Max load in kg

Safety factor x 2 included. Bolt dim. M10.Support Width = W. Heighth = H.Type Cantilever

Point DeflectionW (m) H (m) Channels Load (kg) 3° (kg)

0.5 Single 125 215Type L-Frame

0.5 0.5 Single 169 2000.5 1.0 Single 125 120

Type Cantilever and L-Frame

100 50 42 24 45 43 43 43 53 55

74991 73632 71370 71371 73642 74480

35

Beam Clamp Type C2 Art. no.: Kg

S-FRP BC-LI 73633 0.2

How to use:

For Beam Clamp Light SupportUse U-channel adapted to beam width + 100mm. Add Beam Clamp Light after adapting them to the flange heigth (B).

B

1 bolt

2 bolts

Heavy duty double channel support

Light duty single channel support

1(2)M10x50

SUPPORT SYSTEM FRP

Type C2 Art. no.: Kg/m

S-M FRP CH100-1-6 74991 2.15S-M FRP CH42-1-6 73632 0.93S-M UNO CH45-1-U-6 71370 1.34S-M UNO CH43-1-U-6 71371 1.12S-M FRP CH53-1-6 73642 1.60S-M UNO CH42-1-U-6 74480 0.87

Support ChannelsThese channels are the basic support channels which in combinationwith steel brackets specially developed by Oglaend System will give the unique FRP Smart Support Solution.

Height Width Weight Area X Axis Y AxisIx Cx Rx Iy Cy Ry

Art. no.: (mm) (mm) (kg/m) (mm2) (mm4) (mm) (mm) (mm4) (mm) (mm)

71371 Medium/Heavy duty 43 43 1.12 575 126081 21.50 14.81 161322 19.62 16.76

71370 Heavy duty 43 45 1.34 688 144100 22.5 14.47 203415 18.98 17.19

74480 Light duty 42 42 0.87 464 95837 21.0 14.37 133232 18.49 16.94

Loading & Deflection Table for UNO channels

Maximum uniformly distributed load on X-X Axis Maximum uniformly distributed load on Y-Y Axis

71371 71370 74480 71371 71370 74480Span Weight Deflect Weight Deflect Weight Deflect Weight Deflect Weight Deflect Weight Deflect(Mts) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm) (Kgf) (mm)

1.00 500 20 530 20 240 16 520 25 640 26 460 181.25 410 31 450 32 190 28 440 38 520 40 370 311.50 360 41 390 41 165 37 390 55 490 65 280 542.00 250 72 280 75 105 62 290 65 290 80 200 75

Sectional Properties

B

42 42

36

Beam Clamp and Starter BracketFits beam widths 200-300mm, supplied complete with brackets andbolt set. Give strong support for Back to Back Beam 100x100.


S-FRP FC-BC (Beam C) 73634 5.2

S-FRP FC-BS (Bolt Support) 73636 1.2

The Starter Bracket gives the same advantages to concrete constructions.Fix with 4 expansion bolts M10x60. Supplied.

Every connection point with Gusset Plates need 8 bolt sets:

S-M HE-M10x30 1371327

S-M NU-FL-M10 1371973

Supplied as bolt set ordering gusset plates.

4M10x60

4M10x30

8M10x30

8M10x30

4M10x30

Gusset Plates T and L for channel support Type FRP Art. no.: Kg

S-FRP GP-T 79970 0.5

S-FRP GP-L 79969 0.4

How to use: For easy and quick installation use our Smart Jigs forpredrilling the 8 holes. See next page.

Use our SmartJigs (see page 38)

for exact and easymounting.

For BeamsFor Concrete

A

40

11x20

65Fixing/Expansion Clamp Type A mm FRP Art. no.: Kg

FOE FC-A40X65 6 71410 0.06

This clamp is suitable for the following products:FOE-150 NR, FOE-150 GA, FOE-100 and FOE-70.

1M10x30

37

Smart Jigs Drilling jig for 10 mm holes


DJ-BA-80x160 79959 0.2

DJ-GP-L-80x400 79962 0.6

DJ-GP-T-80x200 79961 0.3

With this jig you can predrill holes in exact positions when cuttingchannel lengths on site. After modifications use Oglaend SystemSealing Kit to preserve the product quality.

Back to Back

Channel / Gusset plate L /Ceiling brackets

Channel / Gusset plate T


Sealing Kits Polyurethane sealer 1 L Art. no.: Litre


1M10x70

1M10x30

Spacer Plate for Double Channel Support Type C2 Art. no.: Kg

S-FRP SH-100x50 74996 0.05

How to use: Place the plate between the channel ends and holdwith a clamp when drilling through. See our special Smart Jigs above.

1M10x30

M10x30Stringer M10x70

Channel Bracket for Stringer For Stringer Support use special Stringer Brackets with 1 through going M10x70 bolt for channel lengthwise stringer or 1 M10x30 bolt for crosswise channel support.

Type SS Art. no.:

S-FRP BC-ST 73640

Supplied with both M10x30 and M10x70.

38

Top

PostD

L

Cross SectionArm

Top and bottom supports are predrilled to accept 2 x M6 x 60 SS316 bolts.Use the drill jig to drill the post once you know the length and insertinto top and bottom UNO channel section and insert the M6 x 60 bolts sets.

NEW!NEW!

Ceiling Support for FRP Trays

A

60 90

Loading for a TPU one nut fixing =

240kgs

Safety factory = 3

Support Plate with 2 nuts M10

Type A mm Pack FRP Art. no.: Kg

S-FRP PL-90x60 6 15 71532

Threaded Rod Type FRP Art. no.: Kg

S-FRP TR-M10-1500 71364 0.15

Glass filled Polyurethane Nut

Type Pack FRP Art. no.: Kg

S-FRP NU-FL-M10 25 71365 0.007

NEW!NEW!

Build your own TRAPEES SUPPORTPart Description Length Dia Pack Art no Kgs

(mm) (mm) /m

Uno ChannelS-M UNO CH42-1-U-6 6000 74480 0.87S-M UNO CH43-1-U-6 6000 71371 1.12S-M UNO CH45-1-U-6 6000 71370 1.34TFRP Threaded Rod S-FRP TR-M10-1500 1500 M10 71364 0.15TPU Nuts NU-FL-M10 (40 LF) M10 25 71362 0.007NU-FL-M10 (26 SF) M10 25 71365 0.007Support washerS-M Washer 50x37 25 71552 0.02TPU boltsS-M HE-M10x40 (40 LF) 40 M10 25 71359S-M HE-M10x40 (26 SF) 40 M10 25 71413Fixing/Expansion clampFOE FC-A40x65 71410 0.06TPU Nut for UNO channelsS-UNO NU-M10 (CN-43) M10 25 71551

CENTRAL SUPPORTType Depth Length Loading Art. no. Kg

(mm) (mm) (kgf)

S-FRP CS-50-150 500 135 310 71440 1.9S-FRP CS-50-200 500 235 300 71441 2.2S-FRP CS-50-300 500 335 300 71442 2.5S-FRP CS-50-400 500 435 260 71443 2.8S-FRP CS-50-500 500 535 245 71445 3.1S-FRP CS-50-600 500 635 240 71446 3.4

Safety factor = 3

Build your own CENTRAL SUPPORTPart Description Length Pack Art. no. Kgs

(mm) /m

Top Fixing 71429 0.20

Post S-M UNO CH43-1-U-6 6000 71371 1.12

Cross SectionCS-150 200 71433 0.25CS-200 250 71434 0.35CS-300 350 71435 0.50CS-400 450 71436 0.65CS-450 500 71437 0.73CS-500 550 71438 0.82CS-600 650 71439 0.98

BoltsS-M-PSM6x60 M6 25 71419 0.02

Drill Jig

NEW!NEW!

39

Type Dim L UDL Weight(mm) Kgf Art. no.: Kg

FRP CA-LD-50 85 170 71477 0.39FRP CA-LD-100 135 109 71478 0.43FRP CA-LD-150 185 81 71479 0.47FRP CA-LD-200 235 65 71480 0.51FRP CA-LD-300 335 47 71481 0.57FRP CA-LD-400 435 41 71482 0.64

2 bolts

2M10x30

Toggle Clamp

Beam width+100 mm

Lighting installation, simple and smart using our twisted bracket.

Channel Bracket Twisted for light channel support Type SS Art. no.: Kg

S-FRP CB-TW 73638 0.3

How to use:

For Beam Clamp Light Support (see page 35)Use U-channel adapted to beam width + 100mm. Add Beam Clamp Light after adapting them to the flenge heigth.

For Corrugated Steel Roof Support use a minimum length of theU-channel for drilling 2 holes Ø11mm with the same cc as 3 bottomcorrugated plates having 2 holes Ø25mm for Toggle Clamp.

Type SS Art. no.:

S-FRP TC-M10x100 73639

cc

Heavy Duty FRPCantilever ArmType Dim L UDL C2 Weight

(mm) Kg Art. no.: Kg

FRP CA-HD-100 135 390 70448 1.0FRP CA-HD-150 185 380 70449 1.1FRP CA-HD-200 235 370 70450 1.2FRP CA-HD-300 335 325 70271 1.5FRP CA-HD-450 485 225 70272 1.9FRP CA-HD-600 635 215 70273 2.1FRP CA-HD-750 785 200 70274 2.3FRP CA-HD-900 985 170 71553 2.6

UDL = Uniformly Distributed Load - safety factor = 3.Longer supports can be supplied on request.

Light Duty FRPCantilever Arm

UDL = Uniformly Distributed Load - safety factor = 3. Longer supports can be supplied on request.

L

L

NEW &

improved

NEW

FRP Profile Description:

40

Channels Dimensions mm Shape Stock 3mt 6mt C1 C2 VE Kg/m Art No Art No ColourH x W x T x (T) C1 C2

S-M FRP CH100-1-6 100 x 50 x 6 x x x x NS 2.15 74991C1 74991 RAL7040S-M FRP CH53-1-6 53 x 55 x 7 x 5 x x x x NS 1.6 73642C1 73642 RAL7040Channel StrutS-M UNO CH43-1-U-6* 43 x 43 x 4 x x x x NS 1.12 71371C1 71371 RAL7040S-M UNO CH45-1-U-6* 45 x 43 x 5 x x x x NS 1.34 71370C1 71370 RAL7040S-M UNO CH42-1-U-6* 42 x 42 x 3 x x x x NS 0.87 74480C1 74480 RAL7040S-M FRP CH42-1-6 42 x 24 x 5 x 3 x x x x NS 0.93 73632C1 73632 RAL7040Flat sheet

926 x 3000 x 3 x x x NS 5.3 74143C1 RAL7040136 x 3000 x 6.35 x x x NS 1.6 74164C1 RAL7040

Rectangular BoxRU-LW-3000 37 x 20 x 3000 x x x x x NS 0.5 74479C1 74479 RAL7040Equal Angle

50 x 50 x 5 x x x x NS 0.9 74120C1 74120 RAL704050 x 50 x 3 x x x x NS 0.6 74121C1 74121 RAL704076 x 76 x 4.8 x x x x NS 1.34 71532C1 71532 RAL7040101 x 101 x 6.4 x x x x NS 2.5 71535C1 71535 RAL7040152 x 152 x 6.4 x x x x NS 3.61 71536C1 71536 RAL7040

Unequal Angle100 x 50 x 6 x 6 NS x x x NS 1.65 71533C1 71533 RAL7040

Square Box50.8 x 50.8 x 6.35 NS x x x NS 2.1 74126C1 74126 RAL7040

Wide Flange Beam102 x 102 x 6.4 NS x x x NS 3.6 71537C1 71537 RAL7040152 x 152 x 6.4 NS x x x NS 5.45 71538C1 71538 RAL7040203 x 203 x 9.5 NS x x x NS 10.85 71539C1 71539 RAL7040

I Beam102 x 50 x 6.4 NS x x x NS 2.4 71540C1 71540 RAL7040152 x 76 x 9.5 NS x x x NS 5.3 71541C1 71541 RAL7040305 x 152 x 9.5 NS x x x NS 10.75 71542C1 71542 RAL7040

* ) dontaes strut type profilex = stocked itemsNS = none stocked

41

Typical coupon properties of Qglaend System ReinforcedPlastics’ structural fiberglass channels (Standard, Polyester& Vinylester fire retardant shapes). Properties derived per theASTM test method. Surface veil and ultraviolet inhibitors arestandard in all channels.

Mechanical Properties ASTM Units PE VETensile Stress, LW D-638 psi 30,000 35,000Tensile Stress, CW D-638 psi 7,000 10,000Tensile Modulus, LW D-638 106 psi 2.5 3.0Tensile Modulus, CW D-638 106 psi 0.8 1.1Compressive Stress, LW D-695 psi 30,000 35,000Compressive Stress, CW D-695 psi 15,000 20,000Compressive Modulus, LW D-695 106 psi 2.5 2.5Compressive Modulus, CW D-695 106 psi 1.2 1.9Flexural Stress, LW D-790 psi 30,000 35,000Flexural Stress, CW D-790 psi 10,000 14,000Flexural Modulus, LW D-790 106 psi 1.8 2.0Flexural Modulus, CW D-790 106 psi 0.8 0.8Modulus of Elasticity, E Full 106 psi 2.6 2.9

SectionShear Modulus —— 106 psi 0.450 0.450Short Beam Shear D-2344 psi 4,500 4,800Punch Shear D-732 psi 10,000 10,000Notched Izod Impact, LW D-256 ft-lbs/in 25 30Notched Izod Impact, CW D-256

Physical Properties ASTM Units PE VE

Barcol Hardness D-2583 —— 47 4724 Hour Water Absorption D-570 % max 0.43 0.43Density D-792 lbs./in.3 .061-.070 .061-.070Coefficient of Thermal Expansion, LW D-696 10-6 in/°C 10 10

Electrical Properties ASTM Units PE VE

Arc Resistance, LW D-495 seconds 120 120Dielectric Strength, LW D-149 kv./in. 35 35Dielectric Strength, PF D-149 volts/mil. 200 200Dielectric Constant, PF D-150 60hz 8 8

Fire Retardant Polyester and Fire Retardant Vinylester Structural Profiles:

Flammability Properties ASTM Units PE VETunnel Test E-84 Flame 25 max. 25 max.

SpreadFlammability D-635 —— Non- Non-

burning burning

Typical Coupon Properties

SCREW LIST FOR FRP SUPPORT: In order of appearance these screws are included in the number listed below the symbol placed at the item. Fixing of accessories may need others. Study our complete screw list on page 43.

Hexagonal screw FOR BEAM CLAMP LIGHT

S-M HE-M10x50 1371330

Flange Nut FOR HEXAGONAL SCREW

S-M NU-FL-M10 1371973

Hexagonal screw FOR THE MOST CONNECTIONS

S-M HE-M10x30 1371327


S-M NU-FL-M10 1371973

Hexagonal screw FOR STRINGER BRACKET CROSSWISE

S-M HE-M10x70 81396


S-M NU-FL-M10 1371973

Anchor Concrete FOR CONCRETE

S-M AC-10x60 1371370

Pan head with star and flange nuts FOR FIXING CLAMPS

S-M PS-M10x20 74145

42

SPECIAL FEATURE: Flange face has a finely serratedsurface which offers a more secure locking and improves surface bonding when adhesives are applied.

SPECIAL SCREWS FOR FRP PRODUCTS: Also study the opoosite page.

Type Where to use Art. no.

Self-Tapping SS Screws FOR END COVERMARUTEX M4.8 x 13 mm 1371373

S-M PS-M10x25 FOR FOE-150 & -100 SPLICE PLATESPan head with star and flange nuts 74139

S-M LS-NU-M6x16 FOR FTE SPLICE PLATES & FOE COVERLocking sets with pan head and flange nuts 74140

Length Thread Shear (Kgs) Torque Stdr.Type Material Diameter mm Safety Factor = 3 (N-m) packs Art. no.

FRP Threaded rod

S-FRP TR-M10-1500 FRP M10 1500 240 8 71364

TPU bolts

S-M HE-M10x40 TPU 40 LF M10 40 190 6 25 71359

S-M HE-M10x40 TPU 26 SF M10 40 140 6 25 71413

TPU Flange Nuts

NU-FL-M10 TPU 40 LF M10 250 6 25 71362

NU-FL-M10 TPU 26 SF M10 220 6 25 71365

Stud Bolts

S-M HE-M10x30 FRP M10 30 240 8 25 71487

S-M HE-M10x50 FRP M10 50 240 8 25 71488

S-FRP TR-M10-80 FRP M10 80 240 8 25 71489

SmartLock Insert in SS

for Rung fixing

Metal Pin M8 SS 25 71354

Optional Insert

S-M HE-M8x25 Nylon M8 25 50 71406

S-M NU-M8 Nylon M8 50 71407

S-M WA-M8 Nylon M8 100 71408

Channel Nut Heavy DutyFits both CH43 and CH45

S-UNO NU-M10 TPU M10 25 71551

43Maks tiltrekningsmoment / Max tightening torque for Self-Lock Flange Nuts: M6 = 8-10Nm, M8 = 20-23Nm, M10 = 40-45Nm, M12 = 80-85Nm

PG = 4-7 my zink. HDG = 40-70 my zink. SS = A4-70 (Hex = A4-80)

STD. packs PG. HDG SSPG+HDG / SS Art. no. Art. no. Art. no.

M 6 x 12 * S-M LS-NU-M6x12 200 1372750 1371981M 6 x 16 * S-M LS-NU-M6x16 200 84487M 6 x 20 * S-M LS-NU-M6x20 100 1371982M 6 x 30 S-M LS-NU-M6x30 100 1372749 1371361M10 x 20 * S-M LS-NU-M10x20 100 1371983M10 x 25 * S-M LS-NU-M10x25 100 1371980 84352M10 x 50 S-M LS-NU-M10x50 50 1371589 1371362M 6 x 12 * S-M LS-M6x12 200 1372167 1372161M 6 x 16 * S-M LS-M6x16 200 84493M 6 x 25 DIN 603 S-M LS-M6x25 200 / 100 1372169 1372162M 6 x 50 DIN 603 S-M LS-M6x50 200 / 100 1371360 85520M10 x 20 * S-M LS-M10x20 200 / 100 1372163M10 x 25 * S-M LS-M10x25 100 / 50 1372765 84352M10 x 30 DIN 603 S-M LS-M10x30 100 / 50 86008 89821M10 x 35 DIN 603 S-M LS-M10x35 100 82709M10 x 50 DIN 603 S-M LS-M10x50 50 89822M10 x 70 DIN 603 S-M LS-M10x70 50 81396M 6 x 12 DIN 933 S-M HE-M6x12 200 1372780M 6 x 16 DIN 933 S-M HE-M6x16 200 1372171 1371318M 6 x 20 DIN 933 S-M HE-M6x20 200 1372172 1371319M 6 x 30 DIN 933 S-M HE-M6x30 200 1371320M 8 x 20 DIN 933 S-M HE-M8x20 200 1371301 1371321M 8 x 25 DIN 933 S-M HE-M8x25 200 1371302 1371322M 8 x 30 DIN 933 S-M HE-M8x30 200 1371303 1371323M10 x 16 DIN 933 S-M HE-M10x16 100 1372178 1371324M10 x 20 DIN 933 S-M HE-M10x20 200 / 100 1371304 1371325M10 x 25 DIN 933 S-M HE-M10x25 200 / 100 1371305 1371326M10 x 30 DIN 933 S-M HE-M10x30 200 / 100 1371306 1371327M10 x 35 DIN 933 S-M HE-M10x35 100 1371307 1371328M10 x 45 DIN 933 S-M HE-M10x45 100 1371308 1371329M10 x 50 DIN 933 S-M HE-M10x50 100 1371309 1371330M10 x 55 DIN 933 S-M HE-M10x55 100 / 50 1371310 1371331M12 x 25 DIN 933 S-M HE-M12x25 100 1371311 1371332M12 x 35 DIN 933 S-M HE-M12x35 100 1371312 1371333M12 x 45 DIN 933 S-M HE-M12x45 100 / 50 1371313 1371334M10 x 40 DIN 933 S-M HE-M10x40 100 1371314 1371335M 6 x 16 DIN 7985 S-M PS-M6x16 200 1372164 1372156M 6 x 20 DIN 7985 S-M PS-M6x20 200 1372842 1372157M 6 x 25 DIN 7985 S-M PS-M6x25 200 84954 1372158 M 6 x 30 DIN 7985 S-M PS-M6x30 200 1372166 1372159 M 6 x 40 DIN 7985 S-M PS-M6x40 100 1372168 1372160Bits conical Torx T30 1371417

6 mm DIN 6923 S-M NU-FL-M6 200 1372843 13719718 mm DIN 6923 S-M NU-FL-M8 200 1372831 1371972

10 mm DIN 6923 S-M NU-FL-M10 200 1372832 1372180 137197312 mm DIN 6923 S-M NU-FL-M12 200 1371343M 6 x 10 DIN 934 S-M NU-M6 100 1372844 1372781M 8 x 13 DIN 934 S-M NU-M8 100 1372176 1371340M10 x 17 DIN 934 S-M NU-M10 100 / 50 1372845 1371341M12 x 19 DIN 934 S-M NU-M12 100 / 50 1372179 1371342

5x30.5x1.5 S-M WA-5x30.5x1.5 200 843946x12x1.6 DIN 125 S-M WA-6.4x12x1.6 200 13727826x18x1.6 DIN 125 S-M WA-6.4x18x1.6 200 1372175 13713496x25x1.5 S-M WA-6x25x1.5 200 1372848 13713508x16x1.6 DIN 125 S-M WA-8.4x16x1.6 100 1372849 1371345 13713518x40.3x1.5 S-M WA-8x40.3x1.5 200 8434510.5x20x2 DIN 125 S-M WA-10.5x20x2 100 1372850 137135212x24x2.5 DIN 125 S-M WA-13x24x2.5 100 1371346 13713537x30.4x1.5 S-M WA-7x30,4x1,5 200 8456211x32x1 S-M WA-11x32x1 200 13713547x35x2 S-M WA-7x35x2 200 137159410x(29x33)x3 S-M WA-10x(29x33)x3 200 84110

M 6 DIN 6798 S-M SW-M6 200 1372852 1371355M 8 DIN 6798 S-M SW-M8 100 1371356M10 DIN 6798 S-M SW-M10 100 1372854 1371357M12 DIN 6798 S-M SW-M12 100 1371359 1371358M 6 x 40 S-M AC-6x40 100 1372767M 6 x 52 S-M AC-6x52 100 1371368 M 8 x 50 S-M AC-8x50 100 1372768 1371369M 8 x 60 S-M AC-8x60 100 1371364M10 x 60 S-M AC-10x60 50 1372769 1371365 1371370M10 x 92 S-M AC-10x92 50 1371366 1371371 M12 x 110 S-M AC-12x110 25 89823

i 100-pakn. / SELF-TAPPING SCREWS in packs of 1004,2 x 13mm 32-PH 100 13494174.2 x 14mm 34-PH 100 13728204.2 x 25mm 36-PH 100 1372821

4.8 x 13 mm MARUTEX M4.8x13 SS in A2 quality 100 1371373 4.8 x 25 mm Marutex M4.8x25 SS in A2 quality 100 1371374Bits 1371375

HUSK: Skruer er inkludert!REMEMBER: Screws are included!SKRUER / SCREWS TYPE

LINSESKRUERPAN HEAD SCREWS

Spisset / Cone point

Type codes:

t=

10.5 x 20 x 2

BITS for torx T30 conical

With Torx T30

LÅSESKRUERLOCKING BOLTS

SEKSKANTSKRUERHEXAGONAL BOLTS

SEKSKANTMUTTEREHEXAGONAL NUTS

SKIVER WASHERS

FLENSMUTTEREFLANGE NUTSSelf-Lock only in SS

STJERNESKIVERSTAR WASHERS

LÅSESKRUERLOCKING BOLT SETSm/linsehode og flensmutter With pan head and flange nutsSelf-Lock only in SS

*) Low

EKSPANSJONSBOLTERCONCRETE ANCHOR BOLTS Kvaliteter: V.G. = 5.8Qualities: S.S. = A4-70

P.G. = 5.8

SELVBORENDE SKRUERInntil/Up to 1 mm stålplate/steelplateInntil/Up to 3 mm stålplate/steelplateInntil/Up to 3 mm stålplate/steelplate

For opptil 2.5mm tykkelse For up to 2.5mm thicknessBits for Marutex

SELVBORENDE RUSTFRIE SKRUER / SELF-TAPPING STAINLESS STEEL SCREWS

Lengre utgaverleveres i DIN 931delgjenget.

Longer lengthsin DIN 931 partly threaded.

ODØ

*) Low

High

44

Chemical exposure chartThe information compiled in this exposure chart is related to data collected from actual projects installed in the field. Temperatures used are neither minimum nor maximum but represents a cross section of test conditions. Some products may be suitable for higher temperatures but individual testing should be carried out prior to installation. Please make contact with Oglaend System for any special applications you may have.RESIN SELECTION

Isophthalic ISOFR Uses modified premium grade Isophthalic polyester resins. Fire retardant and complies with ASTM E 84 and ASTM D635

Vinyl ester VEFR Uses vinyl ester fire retardant resin and complies with ASTM E 84 and ASTM D635

CHEMICAL EXPOSURE CHARTCHEMICAL ISO POLYESTER VINYL ESTER CHEMICAL ISO POLYESTER VINYL ESTERENVIRONMENT Wt % Temp °F Wt % Temp °F ENVIRONMENT Wt % Temp °F Wt % Temp °F

Acetic Acid 10 190 10 210 Lactic Acid SAT 170 SAT 200Acetic Acid 50 125 50 180 Lead Acetate SAT 170 SAT 200Aluminium Chlorine SAT 170 SAT 200 Lead Chloride SAT 140 SAT 200Aluminium Hydroxide SAT 160 SAT 170 Lead Nitrate SAT SAT 200Aluminium Nitrate SAT 150 SAT 170 Linseed Oil 100 150 100 190Aluminium Sulfate SAT 180 SAT 200 Lithium Chloride SAT 150 SAT 190Ammonium Chloride SAT 170 SAT 190 Magnesium Carbonate SAT 140 SAT 170Ammonium Hydroxide 1 100 10 150 Magnesium Chloride SAT 170 SAT 200Ammonium Hydroxide 28 28 100 Magnesium Hydroxide SAT 150 SAT 190Ammonium Carbonate SAT 150 Magnesium Nitrate SAT 140 SAT 180Ammonium Bicarbonate 15 125 SAT 130 Magnesium Sulfate SAT 170 SAT 190Ammonium Nitrate SAT 160 SAT 190 Mercuric Chloride SAT 150 SAT 190Ammonium Persulfate SAT SAT 150 Mercurous Chloride SAT 140 SAT 180Ammonium Sulfate SAT 170 SAT 200 Mineral Oils 100 170 100 200Amyl Alcohol ALL ALL 90 Naptha 100 140 100 170Amyl Alcohol Vapor 140 120 Nickel Chloride SAT 170 SAT 200Benzene Sulfonic Acid 25 110 SAT 200 Nickel Nitrate SAT 170 SAT 200Benzoic Acid SAT 150 SAT 200 Nickel Sulfate SAT 170 SAT 200Benzoly Alcohol 100 100 Nitric Acid 5 140 5 150Borax SAT 170 SAT 200 Nitric Acid 20 70 20 100Calcium Carbonate SAT 170 SAT 200 Oleic Acid 100 170 100 190Calcium Chloride SAT 170 SAT 200 Oxalic Acid ALL 75 ALL 200Calcium Hydroxide 25 70 25 165 Paper Mill Liquors 100 120Calcium Nitrate SAT 180 SAT 200 Perchlorethylene 100 100 80Calcium Sulfate SAT 180 SAT 200 Perchloric Acid 10 150Carbon Disulfide Perchloric Acid 30 80Carbonic Acid SAT 130 SAT 180 Phosphoric Acid 10 160 10 200Carbon Dioxide Gas 200 200 Phosphonic Acid 100 120 100 200Carbon Monoxide Gas 200 200 Potassium Aluminium Sulfate SAT 170 SAT 200Carton Tetrachloride 100 75 Potassium Bicarbonate 50 80 50 140Chlorine, Dry Gas 140 170 Potassium Carbonate 10 10 120Chlorine, Wet Gas Potassium Chloride SAT 170 SAT 200Chlorine Water SAT SAT 90 Potassium Dichromate SAT 170 SAT 200Chromic Acid 5 70 10 120 Potassium Hydroxide 25 150Citric Acid SAT 170 SAT 200 Potassium Nitrate SAT 170 SAT 200Copper Chloride SAT 170 SAT 200 Potassium Permangante SAT 75 SAT 200Copper Cyanide SAT 170 SAT 200 Potassium Sulfate SAT 170 SAT 200Copper Nitrate SAT 170 SAT 200 Propylene Glycol ALL 170 ALL 200Crude Oil, Sour 100 170 100 200 Phthalic Acid SAT 200Cyclohexane, Vapor ALL 100 ALL 130 Sodium Acetate SAT 160 SAT 200Diesel Fuel 100 160 100 180 Sodium Benzoate SAT 170 SAT 200Diethyl Ether Sodium Bicarbonate SAT 160 SAT 175Dimethyl Phthalate 100 80 Sodium Bisulfate ALL 170 ALL 200Ethanol 50 75 50 90 Sodium Bromide ALL 170 ALL 200Ethyl Acetate Sodium Carbonate 10 80 35 160Ethylene Chloride Sodium Chloride SAT 170 SAT 200Ethylene Glycol 100 90 100 200 Sodium Cyanide SAT 170 SAT 200Fatty Acids SAT 180 SAT 200 Sodium Hydroxide 10 150Ferric Chloride SAT 170 SAT 200 Sodium Hydroxide 25 80Ferric Nitrate SAT 170 SAT 200 Sodium Hypochlorite 10 150Ferric Sulfate SAT 170 SAT 200 Sodium Monophosphate SAT 170 SAT 200Ferrous Chloride SAT 170 SAT 200 Sodium Nitrate SAT 170 SAT 200Fluoboric Acid SAT 165 Sodium Sulfate SAT 170 SAT 200Fluosilicic Acid SAT 75 Sodium Thiosulfate ALL 100 ALL 120Formaldehyde 50 75 50 100 Stannic Chloride SAT 160 SAT 190Formic Acid 50 100 Sulfated Detergent 0/50 170 0/50 200Gasoline 100 80 100 150 Sulfur Dioxide 100 80 100 200Glucose 100 170 100 200 Sulfur Trioxide 100 80 100 200Glycerine 100 150 100 200 Sulfuric Acid 93 93 N/RHeptane 100 110 100 120 Sulfuric Acid 50 50 175Hexane 100 90 100 130 Sulfuric Acid 25 75 25 190Hydrobromic Acid 50 120 50 120 Sulfurous Acid 80Hydrobromic Acid 10 150 10 200 Tartaric Acid 170 200Hydrobromic Acid 20 140 20 190 TetrachloroethyleneHydrobromic Acid 37 75 37 95 TolueneHydrobromic Acid 15 80 Trisodium Phosphate SAT 175Hydrogen Bromide, Dry 100 190 100 200 Urea SAT 130 SAT 140Hydrogen Bromide, Wet 100 75 100 130 Vinegar 100 170 100 200Hydrogen Chloride 120 200 Water, Distilled 100 170 100 190Hydrogen Peroxide 30 30 80 Water, Tap 100 170 100 190Hydrogen Sulfide, Dry 140 ALL 180 Water, Salt SAT 170 SAT 190Hydrogen Sulfide, Wet V 140 V 180 Zinc Chloride SAT 170 SAT 200Hypochlorous Acid 10 70 20 100 Zinc Nitrate SAT 170 SAT 200Isopropyl Alcohol 15 80 Zinc Sulfate SAT 170 SAT 200Kerosene 100 140 100 180

LEGEND: SAT - SATURATED, - NOT AVALIABLE, - NOT RECOMMENDED, V - VAPOURS

45

NEMA FG-1

Installation of Oglaend System fiberglass ladder &trays should be made in accordance with the standards set by NEMA Publication FG-1, CableLadder Installation Guide, and National ElectricalCode, Article 318.

Always observe common safety practices whenassembling ladder and fittings. Installations usuallyrequire some field cutting. Dust created duringfabrication presents no serious health hazard, butskin irritation may be experienced by some workers.

Operators of saws and drills should wear masks,long sleeve shirts or coveralls. Fabrication withfiberglass is relatively easy and comparable toworking with wood. Ordinary hand tools may beused in most cases.

Avoid excessive pressure when sawing or drilling.Too much force can rapidly dull tools and alsoproduce excessive heat which softens the bondingresin in the fiberglass resulting in a ragged edgerather than a clean-cut edge.

Field cutting is simple and can be accomplishedwith a jig saw or a circular power saw with abra-sive cut-off wheel (masonry type) carbide grittedor diamond tip blade or hack saw.

Drill fiberglass as you would drill hard wood.Standard twist drills are more than adequate.

Any surface that has been drilled, cut, sanded orotherwise exposed to the elements must besealed with a suitable resin. This is recommendedto prevent corrosive chemicals from reachingexposed glass fibers.

Carbide tipped saw blades and drill bits are recommended when cutting large quantities.

Support the fiberglass material firmly during cutting operations to keep material from shiftingwhich may cause chipping at the cut edge.

Each ladder section length should be equal to orgreater than the support span.-When possible, thesplice should be located at quarter span.

Fittings should be supported as per NEMA FG-1.

WARNING! Not to be used as a walkway, ladder orsupport for personnel. To be used only as amechanical support for cables and tubing.

Cable ladders are designed as a support for poweror control cables, or both and is not intended ordesigned to be a walkway for personnel.

•

•

•

•

•

•

•

•

•

•

Six of the best points for a safeinstallation:

1. Carefully read the MSD Sheet on the resin systemyou are using, Contact Oglaend System for your copy.People with respiratory problems should not beexposed to dust created by FRP products.

2. Observe common safety precautions when usingcutting tools. Always wear gloves, safety glasses orgoggles and a respirator (mask) to reduce inhalation ofdust. We recommend the use of approved masks only.

3. Dust from cutting FRP products can cause skinirritation. Wear clothing to reduce dust from contactingwith skin. If dust causes difficulty in breathing orexcessive skin irritation, stop immediately and consulta doctor.

4. Take care when using the resin sealing pack.Carefully read and follow the instructions enclosed inthe resin pack prior to use. Always wear safety glassesand protective clothing when working with FRP products or resins. Do not allow resin or catalyst tocome in contact with skin.

5. When possible, try to cut or modify on site. This will increase accuracy and reduce waste. Always allow (5mm) for the blade thickness when cutting.

6. To maintain the long service life Oglaend System sproducts are known for always seal the cut ends withan approved sealing resin pack from Oglaend System.

INSTALLATION GUIDE

46

PRODUCT PORTFOLIOOglaend System offer a broad range of cable support systems for all applications, e.g. cabIe Iadders, cable trays, junction box racks, tubing clamps, cable cleats, heating cables, control systems etc.

If you need further information, please do not hesitate to contact us!

Company presentation

Download our latest version of product catalogues from: www.oglaend-system.com

47

FRP products are stocked in volume at various locations around the world. Contact your nearest office for more details.

LOCATIONS HOLDING COMPANYOglaend System Group P.O. Box 133 NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 www.oglaend-system.com

SUBSIDIARYNorway Øglænd System ASP.O. Box 133NO-4358 Kleppe Tel.: + 47 51 78 81 00 Fax: + 47 51 78 81 60 Fax sales office: + 47 51 78 81 61 Email: [email protected] www.oglaend-system.com

DenmarkØglænd System ApSTel.: +45 86 88 66 66Fax: +45 86 88 66 67Email: [email protected]

Dubai (Middle East)Oglaend Industries Middle East Tel.: + 971 4 887 8134Fax: + 971 4 887 8143Mobile: + 971 50 55 86 183Email: [email protected]

MalaysiaOglaend Industries SDN BHDTel.: + 60 3 51 922 049Fax: + 60 3 51 922 039Mobile: + 60 1 26 85 57 65Email: [email protected]@oglaendind.com

The Netherlands Oglaend System BV Tel.: + 31 1804 14 204 Fax: + 31 1804 19 395 Email: [email protected]

Russia (St. Petersburg)Oglaend System RussiaTel.: +7(812) 313 1580Fax: +7(812) 313 1580Email: [email protected]

Singapore (South East Asia)Oglaend System Singapore Pte. Ltd.Tel.: + 65 67 48 82 78Fax: + 65 67 48 86 15 Email: [email protected]

SwedenÖgländ System ABTel.: + 46 (0)40 45 74 60 Fax: + 46 (0)40 45 74 62 Email: [email protected]

UKOglaend System UK Ltd.Tel.: + 44 121 552 9662Fax: + 44 121 544 6627Email: [email protected]

USAOglaend System USA Tel.: +1 832 288 4452Email: [email protected]

KoreaOglaend System Korea Co LtdTel.: + 82 518 320 761Fax: + 82 518 320 762Email: [email protected]

SALES OFFICESNorwayØglænd System AS, Division Oslo:Tel.:+ 47 22 25 15 10 Fax: + 47 22 25 25 21

Øglænd System AS, Division Ålesund:Tel.: + 47 70 19 09 50 Fax: + 47 70 19 09 51

Øglænd System AS, Division Trondheim:Tel.: + 47 73 80 99 70Fax: + 47 73 80 99 77

AGENTS - DlSTRlBUTORSAbu DhabiProserv Albadie LLCTel.: + 971 26 27 73 70Fax: + 971 29 27 79 72Email: [email protected]

AustraliaJ. T. Day Pty. Ltd.Tel.: + 61 8 9303 2248Fax: + 61 8 9303 2446Email: [email protected]

BrazilM.O.TECH do BrazilTel.: + 55 21 2532 2101Fax: + 55 21 2517 2437Email: [email protected]

BruneiShinba Integrated Engineering ServicesTel.: + 673 333-1489Fax: + 675 333-6333Email: [email protected]

CanadaApel/CSA Enterprises Tel.: + 1 902 450 5647 Fax: + 1 902 450 5286 Email: [email protected] www.csarep.com

NOSO Ltd.Tel.: + 1 709 782 2645 Fax: + 1 709 782 0534 Email: [email protected] www.noso.ca

FinlandElmarino - Shipping OYTel.: + 358 22 54 61 00Fax: + 358 22 54 62 76

Finn H&T Group OyTel.: +358 45 630 4004Fax: +358 3 5752550Email: [email protected]

IcelandSmith & NorlandTel.: + 354 52 03 000Fax: + 354 52 03 011Email: [email protected]

lndonesiaPT. Multi Tarex MuIia Tel.: + 62 21 3983 5337Fax: + 62 21 3983 5340Email: [email protected]

ItalyPiemme Broker S.R.L.Tel.:+39 02 906 33621Fax +39 02 906 32036Email: [email protected]

MalaysiaEsteem Link (Letrik Utama) SND BHDTel.: + 60 6 85 417 230, 430 580Fax: + 60 6 85 414 352Email: [email protected]

PolandNd Service Sp. Z.O.O.Tel.: + 48 665 070 111Email: [email protected]

ThailandProbity International Co Ltd.Tel.: + 66 2 710 6146 Ext. 107Fax: + 66 2 710 6147Email: [email protected]

The Baltic StatesBastini OÜTel.: + 372 660 5811 Fax: + 372 660 5812Email: [email protected]

USA (Texas and Louisiana)Source lEC Tel.: + 1 281 882 8300Fax: + 1 281 882-8305Email: [email protected]

VietnamMT Corp.Tel.: + 848 821 0373Fax: + 848 821 0358Email: [email protected]

X

*•

X

HEAD OFFICE AND FACTORY

SUBSIDIARIES

AGENTS – DISTRIBUTORS

SALES OFFICES

FABRICATION FACILITIES

*

••

•

•

•

•

•••

•

X

02.12

SIMPLY THE BEST!This has been our motto since the company was founded in 1977. By living up

to the motto we have become the market leader in our field – worldwide.

Oglaend System´s goal is to develop systems that are better, simpler and more

economic overall.

Holding company: Øglænd Industrier AS, P.O. box 133, NO-4358 Kleppe, Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60

Subsidiary (for metallic): Øglænd System ASHead Office factory: P.O. box 133, NO-4358 Kleppe, Tel.: +47 51 78 81 00, Fax: (47) 51 78 81 60 Fax sales office: +47 51 78 81 61

Subsidiary (for FRP and Metallic): Oglaend Industries SDN BHDJalan Hulu Tinggi 26/6Section 26, Sector AHicom Industrial Park40400 Shah Alam, SelangorMalaysiaTel.: + 60 3 51 922 049Fax: + 60 3 51 922 039Email: [email protected]

www.oglaend-system.com Email: [email protected]

AD

S

frp cable ladders, trays and support system · developed a range of frp (fiber reinforced...

Documents