frp cable tray 1

8/9/2019 Frp Cable Tray 1

1/37


2/37

FRP CABLE TRAY :

EPP FRP Cable Trays are made from FRP sections made of glassFibre and Isopthalic resins by highly sophisticated pultrusionplant and are widely used in various industries for theirnumerous advantages over traditional metallic cable trayssystems


3/37

Pultrusion Process

pultrusion is the process of "pulling" raw compositesthrough a heated die creating a continuous compositeprofile.


4/37


5/37

Cable Tray Raw Material Resin

- Resin used mainly are Unsaturated Poly Ester Resin, IsopthalicResin

- It is available in low or medium viscosity which can be used forfabrication of a wide range of FRP structures by hand lay-up,filament winding and other conventional fabricating techniques.Laminates made by this gives corrosion resistance, excellent

mechanical strength, both static and dynamic, etc.


6/37

Chopped Strand mat

Surface mat use to fabricate first layer of GRP material whichmade from very thin glass fiber strands.

Chopped Strand Mat used in liner are made of chopped glassfiber strands that are bonded together to form mats, either withemulsion or powder binder. They are designed to be compatiblewith resin, and are used to reinforce laminate for moldingapplication.


7/37

Glass roving

It is a continuous type of reinforcement that is used for filamentwinding and other such process where high axial as well as hoopstrength is of prime requirement.


8/37

Design Codes

Designing of various pultruded structure is done as per the actualmeasured strength of profiles.

EN 13706 applies solely to pultruded profiles .This standardspecifies the minimum requirement of quality, tolerances,strength, stiffness and surface of structural profiles. It categoriesin two part like E23 & E17

The EPP CTS are manufactured as per;

1. NEMA FG 1: 1993 Rev. 1 (1994)2. IS 6746: 19943. ONGC 4000 S4. EIL – 50 OEDS – 422 Rev. 4

We have inhouse 24 design engineers working on softwares likeNastran, Auto cad, Unigraphix etc


9/37


10/37

Tests PerformedStandardsApplicable Test Type IS 6746-1994 Specs for Unsaturated Polyester Resin System for Low Pressure Fiber Reinforced Plastics.

IS-6746-Appendix K/UL94 Flame Retardant

ASTM-D-2863 Oxygen Index

ASTM-E84 Flame Spread(Extent of Burning)

ASTM-D638 Tensile Strength at break

Tensile Modulus

ASTM-D695 Compressive Strength at break

Compressive Modulus

ASTM-D732 Shear Strength at break

ASTM-D790 Flexural Strength at break

Flexural Modulus

ASTM-D256 Izod Impact Strength

ASTM-D149 Dielectric Strength short term in Oil

ASTM-D570 Water absorption

ASTM -D 495 ARC Resistance

ASTM D -2883 Barcol Hardness


11/37


12/37


13/37

Manufacturing Facilities

Fully Automatic Pultrusion Machines With Multi dieloading arrangements.

More Than 75 profile sections as per customerrequirements and specifications.

In house Tool Room to Develop new profile die within theshort period.

In House Raw Material and Final Product Testing Facilitiesas per Various Testing Standards.


14/37

EPP Manufactures 2 types of Cable Trays,

a) Ladder Type Cable Tray

b) Perforated Type Cable Tray

with cover and without cover is available .

Perforated Type

Ladder Type


15/37

Features

1. Full Ventilation

2. Long Support Spans

3.Corrosion Resistance

4. Transparent to Radio Frequencytransmission

5. Non Conductive and Non Magnetic

6. Light weight and Manageable

7. High Strength to Weight Ratio

8. Fire Retardants


16/37


17/37

Manufacturing

1. Cable trays are fabricated products frompultruded profile.

2. After manufacturing various pultruded section,fabrication and assembly done as per standarddrawings.

• SS -304 & SS – 316 fasteners are use tofabricate various cable trays.

1. As per the amount of cable load, selection ofprofile takes place like 100 C Channel – 4mm/150 C channel – 6mm etc.

2. Standard length available for cable tray is 3.0meter. And Maximum Support span distancedepends upon weight of Cable.


18/37


19/37

Ladder Type Cable Tray

1. These are manufactured by assembling various cross sections like side runners / ‘C’ channels and rungs.2.The rungs / unistruts are inverted channels of 40 mm width x 20 mm depth and 4 mm thickness.

3.Cable Tray thickness depends height of Cable Tray4.Space between rungs is 300 mm5. The Cable Ladder tray length is the length of the side runner / ‘C’ channels. It is 3000 mm .6.Cable Trays are joined using coupler plates

Coupler Plate

Rungs

C Channel

H- Ht(mm)

T – Thk(mm)

W – Width(

mm)

100 4 30

100 6 30

150 4 40

150 6 40


20/37

Load Capacity

For Ladder Type Cable Tray-

300 mm Rung spacing3000 mm support Span

Width(mm) LoadKg/MtrAllowableDeflection

100 - 150 30 ≤ 10mm

300 60 ≤ 10mm

450-500 75 ≤ 10mm

600 90 ≤ 10mm

750 120 ≤ 10mm


21/37

Fittings

90 Hor Rad Bend 90 Hor Dir Bend Rt & Lt Hand Reducer 90 Inside Ver Rad Bend

Hor Rad Cross 90 Inside Ver Rad Bend Straight Reducer Horizontal Rad Tee


22/37

Perforated Type Cable Tray

The perforated type are C Channel solid bottom, pre-drilled cable tray are designed for light loads namelyinstrumentation and control cables and for transition from cable trays to individuals control points.

Perforations are on standard 300 mm centres and provide both ventilation and sites for cable tie down.


23/37

Fittings

Horizontal Cross

90 Inside Ver Rad Bend90 Hor Bend

90 Outside Ver BendHorizontal Tee


24/37

Accessories


25/37


26/37

Case Study - 2

CLIENT Al Fatah Waterand Power

LOCATION Saudi Araia

PRODUCT FRP Ladder and

perforated TypeCable Tray

(600 , 400 mm)

QTY 21300 M

VALUE 6.28 Cr (3 Orders)

YEAR 2012-13


27/37

Case Study - 3

CLIENT KonstelecEngineer Pvt. Ltd.

LOCATION Manglore Refinery

PRODUCT FRP Ladder andType Cable Tray(300 ,450 ,600 ,

750 mm)

QTY 8650 M

VALUE 83 L

YEAR 2012-13


28/37


29/37

Case Study - 5

CLIENT Adani

LOCATION Mundra - Gujarat

PRODUCT FRP Ladder Type

Cable Tray(600 mm)

QTY 400 M

VALUE 29.3 L

YEAR 2013-14


30/37


31/37


32/37

Testing facilitiesRaw material testing facilities as perrelevant standards .

New standards and facilities are beingincorporated continuously


33/37

Tests PerformedStandardsApplicable Test Type IS 6746-1994 Specs for Unsaturated Polyester Resin System for Low Pressure Fiber Reinforced Plastics.

IS-6746-Appendix K/UL94 Flame Retardant

ASTM-D-2863 Oxygen Index

ASTM-E84 Flame Spread(Extent of Burning)

ASTM-D638 Tensile Strength at break

Tensile Modulus

ASTM-D695 Compressive Strength at break

Compressive Modulus

ASTM-D732 Shear Strength at break

ASTM-D790 Flexural Strength at break

Flexural Modulus ASTM-D256 Izod Impact Strength

ASTM-D149 Dielectric Strength short term in Oil

ASTM-D570 Water absorption

ASTM -D 495 ARC Resistance

ASTM D -2883 Barcol Hardness


34/37


35/37

Geographical reach - Overseas

Saudi Arabia,Doha,Netherlands,Phillipines,Australia,Spain,Africa,USA

MANILA

ChinaUSA


36/37

KIDS ACTIVITYSYSTEM

FUME

SCRUBBER

CUSTOMIZEDPRODUCT

Product Range


37/37

Thank You

EPP Composites Pvt. Ltd.AN ISO 9001:2008 CERTIFIED COMPANY

Plot no 2646, Kranti gate main road, GIDC Lodhika industrial estateKalawad road, Metoda 360021, Dist – Rajkot, Gujarat, INDIA

Ph – +91 2827 287059, 60, 61. Fax – 2827 287063E-mail – [email protected], Web – www.atikagroup.com

frp cable tray 1

Documents