fs-box-v1 user manual | fsdata center & cloud computing infrastructure solution data center...
TRANSCRIPT
Notice
On Operation
Please make sure the device is intact without any damages before
connect it. If it is damaged, please contact us in time for after-sale
service.
If odor, overheating, discoloration, or deformation is detected during use, please disconnect the device immediately.
Please make sure your PC stays connected during the whole process.Do not disconnect the device or transceiver while coding.
On placement
Observe the following cautions, as there may be a risk of heat generation, electric shock, injury or malfunction:
Do not place the device in locations subject to high temperatures (e.g. by a fire or near a heater).
Do not use the unit in a humid place such as bathroom, or in a dusty place.
Do not place heavy objects on the device.
Please keep the device out of the reach of children.
On handling the device
Do not subject the device to strong impact.
Do not disassemble or modify the device. Doing so would void your warranty.
Please disconnect USB cable if the device is not to be used for a long time.
Do not use a damaged USB cable. Doing so may cause electric shock, overheating, and fire.
Introduction
It uses aluminium alloy as case material with delicate craftsmanship like
drawing process and hard anodizing, which makes it robust and
good-looking. And it is easy to carry due to its palm size design.
Product Accessories:
FS Box
Table 1
Data Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure Solution
(Figure1)
6
6 Standard USB Cable
3
1
2
4
5
SFP/SFP+
QSFP+/QSFP28
USB Interface
Indicator Light
XFP
3
1
2
4 5
1
1
Data Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure Solution
Standard USB 2.0-micro Cable
FS Box is an online reconfiguration instrument designed and
manufactured by FS.COM. It supports instant reconfiguration for SFP/SFP+,
XFP, QSFP+/QSFP28 transceivers, DAC and AOC cables. Based on Cloud
coding platform, it is easy to install and operate, providing the most convenient
and timely coding & re-coding services for our customers, saving much time
and expense.
Name Qty
Size
Weight
Case Material
Input Voltage
Operating Temperature
Supported Form Factor
Supported Operating Syetem
Interface
Rendering Engine
108mm*100mm*22mm
220g
Aluminium Alloy
5V
-10℃ to 60℃
SFP/SFP+/XFP/QSFP+/QSFP28
Microsoft Windows 7 and later
USB2.0
Chrome 62 and later
Table 2
Specifications
FS
V 1.1
NETWORKS
FS BOX USER MANUAL
Operation Instruction:
Go to fsbox.com
(Figure 2)
Connect FS Box to
computer via USB cableStart coding
Note: Please pull the bale-clasp latch when unplug the transceiver.
1
2
Insert transceiver or cable3
4
Data Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure SolutionData Center & Cloud Computing Infrastructure Solution Data Center & Cloud Computing Infrastructure Solution
(Figure 3)
www.fs.com
Copyright© 2009-2018 FS.COM. Limited All Rights Reserved.
Light NO
.1
Light NO
.2
Light NO
.3
Light NO
.4
Red light ON
Green light ONRed light Blinking
All OFF
SFPSFP+
XFP QSFP+QSFP28
1 2 3 41 2 3 4
Indicator Light
Light NO.1 Light NO.2 Light NO.3 Light NO.4 Indication
Status
Reading Succeeded
In Coding
Coding Succeeded
Device Connected to PC
Service Activated
Transceiver Detected
Reading Information
Table 3
fsbox.com