fsh ecoline - d347awuzx0kdse.cloudfront.net · fsh has been for some time recognised as a leader in...

FSH EcoLinebe part of a greener future

FSH has been for some time recognised as a leader in electromechanical locking innovation. Examples included winning Engineers Australia Design Awards & ABC New Inventors for the FSH MEM product range. The FSH path of innovations now continues with the launch of the FSH EcoLine™ Product Range.

It is now an accepted scientific fact that carbon dioxide

(CO2 ) is destroying our planet.

With this in mind FSH has engineered a range of energy

saving high security electromechanical locking devices,

setting the trend in the Security industry worldwide.

These devices assist in reducing the carbon footprint

by drastically lowering the current draw (energy

consumption) by up to 80%.

The flow on effect with these substantial power

consumption savings also includes reduced wiring size

and far more importantly stand-by battery reduction

capacity. This translates into substantial cost savings in

tandem with a solid Carbon Footprint reduction.

In the design of these locking innovations FSH has

also taken into account the High Security aspects of

the devices. FSH designers have in fact enhanced

the product performance in that respect by adding

additional security monitoring functions.

The following products are part of the EcoLine™

EcoStrike ™ FES90MP

EcoMag™ ECO5700HS &ECO3500M

EcoLock™ VE1260

MEM Lock MEM2400 Series

FSH EcoLineEnergy Saving Electromechanical Locking Devices

EcoStrikeFES90MP

(Sleep-Mode)

Electric Strikes Australian Footprint

(Fail Safe Configuration)

CURRENT DRAW <15mA@24VDC 175-220mA@24VDC

EcoMagECO5700HS

(Sleep-Mode)

Standard 600kg Holding Force

ElectroMagnetic Locks

CURRENT DRAW 70mA@24VDC 250-260mA@24VDC

EcoMagECO3500M

(Sleep-Mode)




EcoLockVE1260

(Sleep-Mode)

Electromechanical Drop Bolts(Fail Safe

Operation)

CURRENT DRAW 15mA@24VDC Up to 1A@24VDC

MEM2400 Locking Device




COMPARISONS Eco Line Product Standard Devices

WALKING GENTLY ON OUR PLANET

EcoLinebe part of a greener future

™ ™

™

4

TECHNICAL DETAILS

PRODUCT FEATURES

• Releases with up to 35kg of Pre-Load/Side Load

• Motorised locking device

• Durability tested to 1.5 Mill. full pre-load cycles of 35kg

• Multi voltage from 10 to 30VDC

• Sleep Mode Current less than 15mA@12VDC

• Weather resistant

• Fully monitored including Reed Switch for door position

• Pre-drilled for extension lips

• Up to 1300kg holding strength

• 5 year warranty

• Guaranteed shock/hammer resistant

PRODUCT DESCRIPTION

The patented FES90M-P motorised High Security Electric EcoStrike with up to 35kg Pre-Load capability is a revolutionary electric locking solution. With a high Pre-Load /Side-Load tolerance and minimal energy consumption in ‘Sleep-Mode’ it is a truly “Green Locking Solution”.

The strike accepts voltages from 10 to 30VDC, is pre-drilled for extension lips and has a unique and simple fail secure (Power To Open)/ fail safe (Power To Lock) switch-over function.

The door strike provides 3 forms of monitoring:1. LSS (Lock Status Sensor)2. DSS (Door Latch Sensor)3. DPS (Door Position Sensor)

To utilise the Door Position Sensor monitoring function (DPS), FSH is providing special Mortice Lock Face Plates equipped with magnets, as separate items (see Accessories). These Face Plates work in conjunction with the FES90M-P built in Reed Switch.

The electric strike consumes current less than 300mA @ 12VDC at full 35kg pre-load only during locking and unlocking action. In the locked or unlocked state (Sleep-Mode), the electric strike consumes current less than 15mA@12VDC.

FES90MP comes with a 10mm strike lip as standard, to prevent possible personal injury and damage to clothing as with 15mm lips.

FES90M-P

PRODUCT FES90M-PHIGH SECURITY ELECTRIC EcoStrike™ WITH PRE-LOAD CAPABILITY – AUSTRALIAN FOOTPRINT

PART NO. FES90M-P

FUNCTION Mortice Mount, Power-To-Lock/Power-To-Release field interchangeable, 35kg of Pre-Load capability

HOLDING STRENGTH Up to 1370kgTested to 1.5Mill full 35kg pre-load cycles

VOLTAGE/CURRENTMulti Voltage 10-30VDC

Action Mode: 300mA@12VDC at full 35kg pre-load only during locking and unlocking actionSleep-Mode: 15mA @ 12VDC in locked or unlocked mode

APPROVALS4 hour fire rated to A.S. and B.S. Standards

CEC-TICK

MONITORINGLSS - Status Sensor of the internal locking mechanism

DSS - Door Latch Sensor, Door latch engaged within strike keeper DPS - Reed Switch Built-in, monitoring the door position

ENVIRONMENTAL Operational Temperature Range -20º to +60ºC

5

NEW GENERATION ELECTRIC AND ELECTRONIC LOCKING

PRODUCT DIMENSIONS AND INSTALLATION

122

122

122

10

5

24

26

28.517

5.6

39.5

122

26

10

28.53

23

5

138

122

122

PRODUCT DIMENSIONS

Latch front face

cut thruoutline

TEMPLATE

Position this line toyour marking.1mmclearance has beenadded.

5 sizes of extension lips are available5mm,10mm, 25mm, 50mm and 75mm

Depth of cut-out will vary dependant on width of door frame

Dep

th

Lipless

10mm LipStandard

15mm Lip

40mm

162mm

123.1mm

NOT TO SCALE 29.0

44.8

*These dimensions have a tolerance of +0.8mm/-0

176.0

Keeper

INSTALLATION

POSITION OF DOOR LATCH

122

122

122

10

5

24

26

28.5

175.

6

39.5

122

26

10

28.53

23

5

138

122

122

PRODUCT DIMENSIONS

Latch front face

cut thruoutline

TEMPLATE




Dep

th

Lipless

10mm LipStandard

15mm Lip

40mm

162mm

123.1mm

NOT TO SCALE 29.0

44.8


176.0

Keeper

INSTALLATION


122

122

122

10

5

24

26

28.5

175.

6

39.5

122

26

10

28.53

23

5

138

122

122

PRODUCT DIMENSIONS

Latch front face

cut thruoutline

TEMPLATE




Dep

th

Lipless

10mm LipStandard

15mm Lip

40mm

162mm

123.1mm

NOT TO SCALE 29.0

44.8


176.0

Keeper

INSTALLATION


122

122

122

10

5

24

26

28.5

175.

6

39.5

122

26

10

28.53

23

5

138

122

122

PRODUCT DIMENSIONS

Latch front face

cut thruoutline

TEMPLATE




Dep

th

Lipless

10mm LipStandard

15mm Lip

40mm

162mm

123.1mm

NOT TO SCALE 29.0

44.8


176.0

Keeper

INSTALLATION


ORDER DETAILS & ACCESSORIES

PART NO. PRODUCT DESCRIPTION

FES90M-P High Security Electric Eco Strike with pre-load capabilities Australian Footprint monitored 10mm Lip

FES20-EL15 FES20 Extension Lip 15mm




FES20MR·AUS Mortice Lock Faceplates with monitoring magnets for Aust. Lock Company Mortice Lock

FES20MR-DOR Mortice Lock Faceplates with monitoring magnets for Dorma Mortice Lock

FES20MR·KAB Mortice Lock Faceplates with monitoring magnets for KABA Mortice Lock

FES20MR-LEG Mortice Lock Faceplates with monitoring magnets for LEGGE Mortice Lock

FES20MR-LOC Mortice Lock Faceplates with monitoring magnets for Lockwood Mortice Lock

FES20MR-LOC-NS Mortice Lock Faceplates with monitoring magnets for Lockwood Narrow Style Mortice Lock

FES20MR-NOV Mortice Lock Faceplates with monitoring magnets for Novas Mortice Lock

FES20-Rebate Rebate Kit for FES20 Series (Stainless Steel)

6

TECHNICAL DETAILS

PRODUCT FEATURES

ECO5700HS

PART NO. ECO5700HS

FUNCTION Power To Lock (Fail Safe)

HOLDING STRENGTH Up to 680kg in “Alarm-Mode”340kg in “Sleep-Mode”


Sleep-Mode: 12VDC=140mA/24VDC=70mAAlarm-Mode: 12VDC=600mA/24VDC=300mA

MONITORING

Addressable Armature PlateDoor Status Monitoring Sensor (DSS)Lock Status Monitoring Sensor (LSS)

Early Warning Signial Output and Local Alarm Buzzer (EW)Exit Switch Delay Function

Long Distance Light Panel (LP)

SIZE Magnet: L= 268 W= 40 D= 73mmArmature Plate: L= 209 W= 6.2 D= 66mm

• Truly Green product

• Door and Lock Status Monitoring Sensor (DSS & LSS)

• Early Warning signal output and local alarm buzzer (EW)

• Multi Voltage 10-26VDC low power consumption (70mA@24VDC Sleep-Mode)

• Exit Switch Delay Function

• Long distance Light Panel (LP)

• Addressable armature plate

• Zero residual magnetism

• Anti-Tamper-Plate

PRODUCT DESCRIPTION

The patented ECO5700HS model is a high security power saving Electro-Magnetic Lock with an individually encoded addressable armature plate. The lock will only recognize its own armature plate to prevent the device from being compromised by false plates.

Under normal, non-alarm conditions, the ECO5700HS “EcoMag” operates in a low current `Sleep-Mode’ of 70mA@24V with a holding force of 340kg. In the event of an unauthorised attempt to open the door, the ECO5700HS “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 680kg.

The EcoMag operates on multi voltage 10-26VDC, provides an Early Warning (EW) signal output, has a built-in local Alarm Buzzer, with full monitoring of Lock Status and Door Status, long distance Light Panel indicator and an Exit Switch Delay function.

The device is provided with the FSH patented Anti-Tamper-Plate as standard.

PRODUCT ECO5700HSHIGH SECURITY POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™

7



One way security dome nut

Anti-Tamper Plate

8

TECHNICAL DETAILS

PRODUCT FEATURES

ECO5700M

PART NO. ECO5700M


HOLDING STRENGTH Up to 680kg in ‘Alarm-Mode’340kg in ‘Sleep-Mode’


Sleep-Mode: 12VDC=140mA/24VDC=70mAAlarm-Mode: 12VDC=600mA/24VDC=300mA

MONITORING

Door Status Monitoring Sensor (DSS)Lock Status Monitoring Sensor (LSS)



SIZE Magnet: L= 268 W= 40 D= 73mmArmature Plate: L= 209 W= 6.2 D= 66mm




• Multi Voltage 10-26VDC low power consumption (70mA @ 24VDC Sleep-Mode)



• Zero residual magnetism


PRODUCT DESCRIPTION

The patented ECO5700M model is a power saving Electro-Magnetic Lock.

Under normal, non-alarm conditions, the ECO5700M “EcoMag” operates in a low current `Sleeping Mode’ of 70mA@24V with a holding force of 340kg. In the event of an unauthorised attempt to open the door, the ECO5700M “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 680kg.

The EcoMag operates on multi voltage 10-26VDC, provides an Early Warning (EW) signal output, has a built-in local Alarm Buzzer, with full monitoring of Lock Status and Door Status, long distance Light Panel indicator and an Exit Switch Delay function.

This device is provided with the FSH patented Anti-Tamper-Plate as standard.

PRODUCT ECO5700MPOWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™

9




Anti-Tamper Plate

10

TECHNICAL DETAILS

PRODUCT FEATURES

ECO3500M




• Multi Voltage 10-26VDC low power consumption (60mA@24VDC Sleep-Mode)




PRODUCT DESCRIPTION

The patented ECO3500M model is a power saving Electro-Magnetic Lock. Under normal, non-alarm conditions, the ECO3500M “EcoMag” operates in a low current `Sleeping Mode’ of 60mA@24V with a holding force of 100kg. In the event of an unauthorised attempt to open the door, the ECO3500M “EcoMag” “wakes up” and goes into an Alarm Mode with full current of 300mA@24V applied to the device, instantly increasing the holding force to up to 280kg.

The EcoMag operates on multi Voltage 10-26VDC, provides an Early Warning (EW) signal output, has a built-in local Alarm Buzzer, with full monitoring of Lock Status and Door Status, long distance Light Panel indicator and an Exit Switch Delay function.

The device comes with the FSH patented Anti-Tamper-Plate as standard.

PRODUCT ECO3500M POWER SAVING ELECTRO MAGNETIC LOCKING DEVICE EcoMag™

PART NO. ECO3500M


HOLDING STRENGTH Up to 280 kg in ‘Alarm-Mode’100kg in ‘Sleep-Mode’

VOLTAGE/CURRENTMulti Voltage 10-26VC

Sleep-Mode: 12VDC=120mA / 24VDC=60mAAlarm-Mode: 12VDC=600mA / 24VDC=300mA

MONITORING

Door Status Monitoring Sensor (DSS)Lock Status Monitoring Sensor (LSS)



SIZE Magnet: L=238 W=48 D=24mmArmature Plate: L=185 W=38 D=12mm

11




Anti-Tamper Plate

12

TECHNICAL DETAILS

PRODUCT FEATURES

PRODUCT VE1260HIGH SECURITY MOTORISED DROP BOLT WITH PRE-LOAD CAPABILITY EcoLock™

PRODUCT FEATURES

TECHNICAL DETAILS

• Releases with up to 35kg of Pre-Load/Side Load

• Motorised locking device

• Durability tested to 400,000 cycles

• Multi voltage from 12 to 30VDC

• Sleep-Mode Current less than 15mA@12VDC

• Fully monitored including Reed Switch for door position

• Up to 1000kg Holding Strength

• 5 year warranty

• Retrofit version for Trimec/PADDE ES8000 (VE1260S Square Edge Version)

VE1260

PART NO. VE1260

FUNCTION Mortice Mount, power-to-lock/power-to-release field interchangeable, up to 35kg of Pre-Load capability, unlocking and up to 6.5kg locking

HOLDING STRENGTH Up to 1000kg

VOLTAGE/CURRENT

Multi Voltage 12-30VDCActive Mode: Locking/Unlocking cycle current is 0.29A to 0.85A depending on the side load.

More side load = more current. See preload vs. current graph. Sleep-Mode: After locking/unlocking the current drops down to ~0.015A (15mA)

APPROVALS

CEC-Tick

Fire rated in accordance with AS1905.1.2005 Part 1 to up to 4 hours on fire door assemblies

MONITORINGLock Status Sensor of the internal locking mechanism

Door Status Sensor Built-in Reed Switch, monitoring the door position

ENVIRONMENTAL Operational Temperature Range -20 to +60C

DURABILITYExceeding Australian Standard AS4145.2-2008

400,000 operating cycles • Durability D7

STRENGTH Meeting Australian Standard AS4145.2-2008

• Static Strength S8• Impact Strength S8

MAXIMUM DOOR GAP 8mm

DOOR MISALIGNMENT Standard Strike Plate + 4mm Special Strike Plate up to + 12mm--

PRODUCT DESCRIPTION

The patented EcoLock VE1260 is a high torque motor driven Drop Bolt with up to 35kg pre-load/side load tolerance. It can be installed vertically in the door frame (lock style) or horizontally in the frame header and has a symmetric dead-bolt mechanism to allow to be used on 180 degree swing through doors.

The VE1260 is considered a “Green Product” as it consumes an inrush current of 290mA @ 12VDC only during locking and unlocking action (Active Mode), then in the locked or unlocked state (Sleep-Mode), the Drop Bolt consumes current less than15mA @ 12VDC.

A series of additional Strike Plates allow for door misalignment of up to +12mm and a retrofit version of the FSH Eco Lock is available to suit the PADDE/TRIMEC ES8000 drop bolt footprint.

An optional LED red/green indicator unit is available.

-

13


PRODUCT DIMENSIONS AND INSTALLATIONDescriptionIssue

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

7654

EN Ref. DateINT.

A3

UNLESS OTHERWISE NOTED

WRITTEN AUTHORISATION

PROPERTY OFSEE EN FOR NO REPRODUCTION IN PART

AUTHORIZATION

DRAWN TO AS1100

ALL DIMENSIONS IN MILLIMETERS

DO NOT SCALE DRAWING

MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

DRAWING NO.:

SIZE:

OR WHOLE IS PERMITTED WITHOUT DRAWING

SHEET

UNIT 9, 30 PERRY STREETMIN MATRAVILLE, NSW 2036, AUSTRALIA

PROJECTION

SURFACE FINISH

FIRE & SECURITY HARDWARE P/L

8

1 OF 11:3

TOLERANCES ARE

3.2

0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5

CHKD

STRIKE PLATE

FACEPLATE

MOUNTING

DOOR

DOOR JAMB

BRACKETSMAXIMUMDOOR GAP

8.0mmMAX.

VE1260R Round Edge

DescriptionIssue

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

7654

EN Ref. DateINT.

A3




AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

DRAWING NO.:

SIZE:


SHEET

UNIT 9, 30 PERRY STREETMIN MATRAVILLE, NSW 2036, AUSTRALIA

PROJECTION

SURFACE FINISH


8

1 OF 11:3

TOLERANCES ARE

3.2


CHKD

BRACKETS

STRIKE PLATE

MOUNTING

FACEPLATE

DOOR

DOOR JAMBMAXIMUMDOOR GAP

8.0mmMAX.

VE1260S Square Edge

25.0

25.0 30.5

210.0

25.0

30.5

185.0

DOOR JAMB

LINE 2

Description DKHCeussI

EA

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

54

EN Ref. DateINT.

FDB80MP - VE LOCK

DRAWING

MATRAVILLE, NSW 2036, AUSTRALIA

7


PROJECTION

SEE EN FOR NO REPRODUCTION IN PART

AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

8

PROPERTY OF

DRAWING NO.:

SIZE:

3.2

OR WHOLE IS PERMITTED WITHOUT


MIN


6

SURFACE FINISH

A31 OF 1

1:2

TOLERANCES ARE

SHEET

UNIT 9, 30 PERRY STREET


18/10/2012

LOCKFACEPLATE

41.5

25.0

22.5

210.0

R12.5

31.6

163.0

185.0

Locking Device VE1260R Round Edge

30.0

18.0

18.0

256.0

DOOR JAMB

LINE 2 LOCKFACEPLATE

22.5

49.5

163.0 256.0

30.0

41.5

EA

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

87654

CHKDIssue Description EN Ref.


PROJECTION

OR WHOLE IS PERMITTED WITHOUT NO REPRODUCTION IN PART

AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

DRAWING NO.:

SIZE:

SHEET

DRAWING

MATRAVILLE, NSW 2036, AUSTRALIAUNIT 9, 30 PERRY STREET

TOLERANCES ARE

A3

UNLESS OTHERWISE NOTEDSEE EN FOR

1 OF 1

FIRE & SECURITY HARDWARE P/LPROPERTY OF

1:2

DateINT.

3.2

FDB80MP - VE LOCKMINSURFACE FINISH


18/10/2012

Locking Device VE1260S Square Edge

22.5

DateEN Ref.Description

1 OF 1

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

54

INT.

A3

1:3

3.2

DRAWING


7


PROJECTION


AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

8

PROPERTY OF

DRAWING NO.:

SIZE:


UNLESS OTHERWISE NOTEDTOLERANCES ARE FIRE & SECURITY HARDWARE P/L

6


Issue

MIN

SHEET

SURFACE FINISH


CHKD

Ø22.0 x 20 DEEPLINE 3

DOOR

LINE 1(HALF THICKNESS OF DOOR)

185.0

28.0

103.5 STRIKE PLATE3mm THICK

27.0

R12.5 R12.5

210.0

Strike Plate VE1260R Round Edge

53.0

7.0

1:31 OF 1A3

INT. DateEN Ref.DescriptionIssue

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

3.2MINSURFACE FINISH

87

F





PROJECTION


AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

54

TITLE

DRAWN:

SIZE:

6

PROPERTY OF

DRAWING NO.:


E

DATE:

TOLERANCES ARE


SCALE:

SHEET


CHKD

STRIKE PLATE3mm THICK

27.0

256.0

Ø22.0 x 20 DEEP

DOOR

LINE 3

LINE 1(HALF THICKNESS OF DOOR)

28.0

242.0

132.0

Strike Plate VE1260S Square Edge

14

31.4

31.

4

185

EA

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

87654

CHKDIssue Description EN Ref.


PROJECTION

OR WHOLE IS PERMITTED WITHOUT NO REPRODUCTION IN PART

AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

DRAWING NO.:

SIZE:

SHEET

DRAWING

MATRAVILLE, NSW 2036, AUSTRALIAUNIT 9, 30 PERRY STREET

TOLERANCES ARE

LINISH AS PER INSTRUCTIONS

UNLESS OTHERWISE NOTEDSEE EN FOR

Assembly

FIRE & SECURITY HARDWARE P/LPROPERTY OF

0.5

DateINT.

HS0002SEE BOM TABLE

A3

SURFACE FINISH MIN3.2

1:11 OF 1

0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES

VE Lock Glass Door Mount -Housing Weld 30/10/2012

180

228.2

47.

5

20.

8


Glass Door Box VE1260R-GL

1 OF 11:1

31mm VE Lock Strike Plate

PL0017-1

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

54

EN Ref. DateINT.

3mm THICK 304 SS SHEET N4 FINISH

DRAWING


7


PROJECTION


AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

8

PROPERTY OF

DRAWING NO.:

SIZE:

3.2



EA


6

MIN

CHKD

A3

SURFACE FINISH

DescriptionIssue

SHEET


TOLERANCES ARE0 DECIMAL 0.251 DECIMAL 0.102 DECIMAL 0.05ANGLES 0.5

11/6/2013

Y1 RELEASED FOR PROTOTYPING 11/6/13

6.0

242.0

23.6

12.011.0x90

256.0

110.0

76.0

31.0

35.0

MAGNET 3.0

MAGNETS

11.0x90

27.6

76.0 12.0

35.0

110.0

242.0

256.0

35.0 6.0

CHKD

35mm VE LOCK STRIKE PLATE

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

7654

Issue Description EN Ref. Date




AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN: SCALE: DATE:

DRAWING NO.:

SIZE:


SHEET


A3


PROJECTION

1 OF 1


8

1:1

INT.

3mm THICK 304 SS SHEET N4 FINISH

3.2

PL0018-1

EA

TOLERANCES ARE

SURFACE FINISH MIN


11/6/2013


3.0

MAGNETS

11.0x90

40.0

256.0

242.0

110.0

76.0

32.6

35.0

12.0

6.0

3.0

DateEN Ref.Description DKHCeussI

EA

D

E

F

C

321

B

A

321 5

C

D

4 876

A

B

E

F

INT.

3mm THICK 304 SS SHEET N4 FINISH40mm VE LOCK STRIKE PLATE

PL0019-1

PROPERTY OF


5




PROJECTION


AUTHORIZATION

DRAWN TO AS1100



MATERIAL:

FINISH:

HEAT TREATMENT:

TITLE

DRAWN:

76

SCALE: DATE:

3.2

8

DRAWING

MIN


4

SURFACE FINISH

A31 OF 1

1:1

TOLERANCES ARE

DRAWING NO.:

SIZE:

SHEET



11/6/2013


Accessory Strike Plate VE1260S-ST6



15


0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

0 1 2 3 4 5 6 7 8

Curr

ent

Am

ps

Preload Kg

VE1260 Maximum Current vs. Preload

12 Volt

24 Volt

CURRENT VS. PRELOAD GRAPH

ORDER DETAILS

PART NO. PRODUCT DESCRIPTION

ECOLOCK VE1260 SERIES

VE1260REcoLock Pre-Load Drop Bolt 25mm Face Plate

including 27mm Strike Plate ROUND EDGE to cater for +4mm door misalignment

VE1260S

EcoLock Pre-Load Drop Bolt 30mm Face Plate

including 27mm Strike Plate SQUARE EDGE to cater for +4mm door misalignment

(PADDE ES8000 Replacement)

ACCESSORIES VE1260 SERIES

VE1260R-GL Glass Door Box for VE1260R Lock or VE1260R-ST4 Strike Plate ROUND EDGE

VE1260LED-BOX LED Monitor Box for Lock-Status Monitoring Indication (Red/Green)

VE1260R-SCEC Security Bracket for VE1260R

VE1260S-ST6Strike Plate 31mm for VE1260 Series to cater for +6mm door misalignment minimum

Door Thickness 35mm SQUARE EDGE





-

-

-

-

-

16

TECHNICAL DETAILS

PRODUCT FEATURES

PART NO. MEM2400LP

LIGHT FEATURE Light Panel (LP)

FUNCTION Surface mountOutward opening doors


VOLTAGE/CURRENT Dual Voltage 12/24VDC 12VDC/240mA 24VDC/120mA

APPROVALS 4 hour fire rated to A.S. and B.S. standards

MONITORING EW / LSS / DSS

SIZEMEM size L= 158mm H= 35mm D= 30mmArmature Plate size L= 120mm H= 30.6mm D= 12.5mmAnti-Tamper-Bracket size L= 194mm H= 38mm D= 30mm

• Slimline design 75% smaller than a standard 600kg magnet

• High holding force up to 1000kg and releases under side load of up to 70kg

• Dual-Voltage 12/24VDC Low power consumption 24VDC/120mA

• 5 year warranty

• Simple installation

• 4 hour fire rated

• Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)

• Early Warning Alarm (EW)

• Anti Tamper Bracket (to protect the armature plates fixing bolt)

MEM2400LP

PRODUCT DESCRIPTION

The innovative slimline MEM2400LP Mechanical Electro Magnetic Lock has been designed as an alternative to standard magnetic locks especially suited for situations where door height or narrow profile door frames create installation restrictions and appearance is of paramount importance.

The patented MEM incorporates both magnetic and mechanical design principles to achieve a superior holding force of up to 1000kg, whilst being 75% smaller than a standard 600kg Electro Magnet.

The MEM2400 is capable of opening with up to 70kg side pressure on the door and has the added security function of “Early Warning” alarm condition. The device comes with the FSH patented “Anti-Tamper-Bracket” as standard.

PRODUCT MEM2400LPMEM MECHANICAL ELECTRO MAGNETIC LOCKING DEVICE FOR OUTWARD OPENING HINGED DOORS

17



Installation diagram

12 VOLT JUMPER POSITION


SPAREJUMPER

(D)

(B)

(C)

Door

Door Frame

Magnet

(D)

(B)&(C)

Installation dimension

35.0

120.0164.0194.0

12.5

18.5

Armature Plate & Anti-Tamper

30.5

30.0

5.5

158.0

120.0

38.0

PART NO. AMGB24-12

Installation diagram



SPAREJUMPER

(D)

(B)

(C)

Door

Door Frame

Magnet

(D)

(B)&(C)

Installation dimension

35.0

120.0164.0194.0

12.5

18.5

Armature Plate & Anti-Tamper

30.5

30.0

5.5

158.0

120.0

38.0

PART NO. AMGB24-12

ACCESSORIES

AMGB24-12 Glass Door Bracket U-ProfileMEM2400L Adjustable L-Bracket for Narrow Header Frames

Thickness of material = 1.5m/m Minimum Door Gap 3mm

PART NO. AMGB24-12PART NO. MEM2400L

18

TECHNICAL DETAILS

PRODUCT FEATURES

• Slimline design 75% smaller than a standard 600kg magnet

• High holding force up to 1000kg and releases under side load of up to 70kg

• Dual-Voltage 12/24VDC Low power consumption 24VDC/175mA

• 5 year warranty

• Simple installation

• 4 hour fire rated

• Full monitoring Lock Status Sensor (LSS) and Door Status Sensor (DSS)

• Early Warning Alarm (EW)

• Anti Tamper Bracket (to protect the armature plates fixing bolt)

MEM2400LED-LZ

PRODUCT DESCRIPTION

The innovative slimline MEM2400LED-LZ Mechanical Electro Magnetic Lock for inward opening doors has been designed as an alternative to standard magnetic locks. The MEM2400LED-LZ comes as a combination with L&Z-Brackets.

The patented MEM2400LED-LZ incorporates both magnetic and mechanical design principles to achieve a superior holding force of up to 1000kg. The MEM2400LED-LZ is capable of opening with up to 70kg side pressure on the door.

PRODUCT MEM2400LED-LZ MEM MECHANICAL ELECTRO MAGNETIC LOCKING DEVICE FOR INWARD OPENING HINGED DOORS

PART NO. MEM2400LED-LZ

LIGHT FEATURE LED

FUNCTION Surface mountInward opening doors including L&Z Bracket


VOLTAGE/CURRENT Dual Voltage 12/24VDC 12VDC/350mA 24VDC/175mA

APPROVALS 4 hour fire rated to A.S. and B.S. standards

MONITORING EW / LSS / DSS

SIZE MEM size L= 218mm H= 36mm D= 30mmArmature Plate size L= 174mm H= 30.5mm D= 12.5mm

19



Installation dimension Bearing sleeve nut 5.5

30.5

218.0

30.0

30.5

Armature plate

174.0

50.0

5.0

(D)

dome-nut

(C)

Magnet

Door

Door Frame

(B)

12 VOLT JUMPER POSITION24 VOLT JUMPER POSITION

SPAREJUMPER

(C)

(B)

(A) (D)

Installation dimension Bearing sleeve nut 5.5

30.5

218.0

30.0

30.5

Armature plate

174.0

50.0

5.0

(D)

dome-nut

(C)

Magnet

Door

Door Frame

(B)

12 VOLT JUMPER POSITION24 VOLT JUMPER POSITION

SPAREJUMPER

(C)

(B)

(A) (D)

WALKING GENTLY ON OUR PLANET

Version: ac/mob 03.13This publication is produced on stock from well managed forests and printed using vegetable based inks

fsh ecoline - d347awuzx0kdse.cloudfront.net · fsh has been for some time recognised as a leader in...

Documents