full circle® cuttings reinjection baroid’s drilling waste management solutions
TRANSCRIPT
Full Circle® Cuttings Reinjection
Baroid’s Drilling Waste Management Solutions
2 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
Why Baroid?
1925 Filed patent for first barite-based drilling fluid
1930 First mud school
1932 First mud-testing procedures and kit
1939 First mud-logging service
1940s Pioneers service by air and sea
1950s Invents foam drilling technology
1960s Invents oil-based fluid, Invermul® system
1970s Develops new fluids for hostile geology
1980s Develops mud loop testing, improves waste management
1990s Pioneers biodegradable invert drilling fluids
2000s Rolls out first families of clay-free syntheticand high performance water-based fluids
2010s Introduces automated mud monitoring equipment to industry
3 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
customer CHALLENGE
Dispose of drilling waste economically, safely,
compliantly
4 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
customer CHALLENGE Maximize oil recovery for re-use in system
Reduce disposal volumes
Safe transportation of drilling associated waste
Environmental compliance
Improve environmental leadership image through reduction of waste disposal, resource consumption, GHG emissions, transportation exposure
Minimization of environmental liabilities when disposing
5 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
Baroid’sSOLUTION
Baroid’s FullCircle® cuttings reinjection (CRI) service for treatment and downhole injection of drill cuttings helps to: Lower costs Eliminate steps – such as
transportation (annular injection)
Meet environmental requirements
6 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
Baroid’s FullCircle® injection system delivers significant advantages to operators. It requires no transportation and handling.
value PROPOSITION
7 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
Cuttings Reinjection applications: Onshore operations Offshore operations
APPLICATIONS
8 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
offshore APPLICATIONS
Conveyance/Transport Cuttings Processing Injection
9 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
offshore Peripheral Equipment
Honeycomb base tanks SupaVac – Vacuum Transfer System
10 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
onshore APPLICATIONS
Transportation Cuttings Processing Injection
11 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
onshore Peripheral Equipment
Hammermill SupaVac – Vacuum Transfer System
12 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
comparativeOffshore vs. Onshore
Offshore OnshorePower • Limited Power Availability from
the Rig Generators• Can be provided from the main
grid or from Generators
Footprint • Minimum Possible • No Restrictions
Electrical • Must comply with stringent offshore regulations
• Can comply with General Industrial Regulations
Throughput • To allow injection in real time • Limited with formation
Contingency Storage • Bulk Tanks• Skips
• Pits• Bulk Tanks• Skips
Redundancy • 100% requirement • Depending on the remoteness of the locations
Real time injection • Required • Can be done in both offline and in real time
Most common injection type • Annular • Both Annular and Dedicated Well
13 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
keyFEATURES
• Small Footprint
• Modular Lifting System
• All equipment is provided in “plug and play” mode
• All electrical equipment on the skids should be suitable for Zone II area use
• Slurry unit can be integrated Cuttings Bulk Tanks and Pneumatic Cuttings Conveyance Systems
• System can include Hammermill for Cuttings Grinding if required
14 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
Slurrification UnitSlurrification Unit: Minimal footprint Compact designs requirement Good overview on operations Avoid any NPT and drilling
interruption 100% redundancy Real time injection while drilling Should be easily Mobilized and
Demobilized when needed High Capital Cost
15 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
customer BENEFITS• Modular design allows addition or replacement of modules
as required,• Compact design provides lowest footprint for the
installations with limited deck space,• 100% redundancy provided with twin pump system
provided for each module,• Interchangeable parts allows ease and quick
maintenance,• Can be installed anywhere on the deck where space is
available,• Process Cuttings in the Real Time while drilling
16 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
consistent QUALITY
17 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
laboratorySUPPORT
Analytical technical support Bioassay technical support Reservoir fluids technical services Drilling fluids technical services Industrial drilling products lab Quality assurance Research and development
Baroid’s Laboratory Services include:
Baroid scientists and engineers work with state of the art equipment and an extensive global database in order to perform comprehensive testing analysis on a global scale.
18 © 2014 HALLIBURTON. ALL RIGHTS RESERVED.
Discover Baroid’sECOSYSTEM