FUTURE TECHNOLOGY CLASSIC EMOTIONS

FOR PIRELLI, INNOVATION IS A TRADITIONWith a rich tradition of motorsport behind it, Pirelli has breathed new life into historic rallying with the P7TM Corsa Classic range. Rather than a new version, this is an innovative reinterpretation of the ‘Competition King’: the tyre used in groups 1-2-4, A and B. P7TM Corsa Classic combines the

latest generation of structure and tread pattern with the unvaried design of the sidewall, making it the winning combination between innovation and tradition.During the tyre development, Pirelli engineers used the same parameters to maintain the car’s intended set-up and dynamics. The result is performance, style and authenticity.

DRY VERSIONIt is developed from the asymmetrical pattern that has characterised the very best Pirelli Ultra High Performance tyres. This is how the dry P7TM Corsa Classic transforms its multipurpose design into grip:

A A generous inner tread blocks to optimize directionality

B An outer semi-slick pattern ensures maximum lateral grip in the dry, together with a solid centre rib to ensure a precise line even at high speeds.

High orsa rip:

mize

mumntres.

A B

A B CWET VERSIONThis is characterised by an asymmetric tread pattern divided into three areas, which ensure excellent road-holding both in damp and wet conditions, outstanding structural durability, maximum lateral stability and consistent performance levels in the heat of competition.

A A densely grooved inner tread block pattern increases water dispersal and prevents aquaplaning.

B Two longitudinal grooves divide the centre section providing moreprecise turn-in and driveability in the wet.

C Thinner grooves and more solid blocks on the outside of the tyre lead to improved lateral grip yet maintain efficient water evacuation.

Hard dry version for use on stages longer than20 km, with very abrasive asphalt and temperatures of over 25°C.

Medium dry version for use on stages with average asphalt in temperatures of 10 to 30°C.

Soft dry version for use on stages with smooth asphalt with temperatures from 0°C to 15°C. It behaves very well on mixed damp and dry surfaces.

Wet version. Not Only recommended for full wet conditions but also for mixed wet to damp conditions.

IDEAL COMPOUNDS FOR THE BEST PERFORMANCEP7TM Corsa Classic offers an innovative solution for historic rallying, striking exactly the right balance between looks and performance to satisfy the most ardent drivers and collectors of rally cars from the golden age of the sport.

On top of this, it is optimised to excel under a huge variety of different weather conditions and surfaces, according to the chosen compound.

COMPOUND SURFACE

WORKING TEMPERATURE (°C) SMOOTH MEDIUM ABRASIVE

D3 70° - 120°

D5 50° - 90°

D7 20° - 60°

W7 20° - 60°

CONDITION TEMPERATURE (°C) COMPOUND

WET DAMP DRY -5 0 5 10 15 20 25 30 30+

D3

D5

D7

W7

D3

D5

D7

W7

!P7TM Corsa Classic are exempt from EU Regulation EC1222/2009 as they are designed exclusively for fitment to Classic Cars which have

been registered for the first time before 1st October 1990 and are not intended for everyday use on public roads or modern vehicles.

SAFETY WARNING: Follow tyre manufacturer’s instructions. Danger may result from improper use. Refer to car manufacturer’s

recommendations with respect to tyre fitments for each model.

SIZE VERSION SECTION WIDTH

TREAD WIDTH

ROLLING CIMCUNFERENCE

RIM

165/60R13 70H(160/535 R13)

D3 175 160 1650 5 - 5.5 - 6

D5 175 160 1650 5 - 5.5 - 6

W7 175 160 1650 5 - 5.5 - 6

225/45R13 77H(225/45R13)

D3 225 205 1660 7 - 7.5 - 8.5

D5 225 205 1660 7 - 7.5 - 8.5

D7 225 205 1660 7 - 7.5 - 8.5

W7 225 205 1660 7 - 7.5 - 8.5

215/45R15 80H (200/575 R15)

D3 220 200 1800 6.5 - 7 - 7.5

D5 220 200 1800 6.5 - 7 - 7.5

235/45R15 80W(225/595R15)

D3 238 210 1870 8 - 8.5 - 9

D5 238 210 1870 8 - 8.5 - 9

D7 238 210 1870 8 - 8.5 - 9

W7 235 210 1870 8 - 8.5 - 9

285/40R15 82W(265/40VR15)

D3 290 260 1900 9.5 - 10 - 10.5

D5 290 260 1900 9.5 - 10 - 10.5

295/40R15 87H W7 305 280 1950 9.5 - 10 - 10.5

305/35R15 87W(305/35VR15)

D3 315 290 1870 11 - 11.5-12

D5 315 290 1870 11 - 11.5-12

D7 315 290 1870 11 - 11.5-12

225/45R16 80W(235/610 R16)

D5 230 215 1910 7 - 7.5 - 8

W7 225 210 1910 7 - 7.5 - 8

255/50R16 89W (230/660R16) D5 256 225 2075 8.5 - 9 - 9.5

315/40R1690W(290/660R16) D5 315 280 2075 10.5 - 11 - 11.5

235/40R17 80W(245/620R17)

D3 250 230 1925 8 - 8.5 - 9

D5 250 230 1925 8 - 8.5 - 9

W7 250 230 1925 8 - 8.5 - 9

FITMENT

Gr. 1>4Talbot Samba / A112 Abarth / Citroen Visa /

Fiat 127-128 / Renault Alpine / WW Golf I

Gr. 2>4Opel Kadett / Ford Escort MK / BMW 2002 /

Lancia Beta Montecarlo / Fiat 124 Abarth / Renault Alpine / Talbot Lotus / WW Golf

Gr. A from 1987 to 1990

Peugeot 205-309 GTI / Fiat Ritmo 130 TC / Opel Kadett Gr.A / Renault R11 / Renault GT Turbo / Front: Porche 911 Gr.1 / Lancia Stratos

Gr. 2>4Front: Lancia Rally 037 / Lancia Stratos Fiat 131 Abarth /

Porsche 911 / Opel Ascona / Opel Manta / Renault 5 Maxi Turbo / Mazda RX7 / Ferrari 308 / Audi Quattro Gr.4

Gr. 2>4Rear: Fiat 131 Abarth / Porsche 911 Gr.2 / Opel Ascona /Opel Manta / Renault 5 Maxi Turbo / Audi Quattro Gr.4

Gr. 2>4 Rear: Lancia Stratos / Fiat 131 Abarth / Porsche 911 / Opel Ascona / Opel Manta / Ferrari 308 / Renault 5 Maxi Turbo / Audi Quattro Gr.4 / Mazda RX7

Gr. 2>4Rear: Lancia Stratos / Fiat 131 Abarth / Porsche 911 / Opel Ascona /

Opel Manta / Ferrari 308 / Renault 5 Maxi Turbo / Mazda RX7

Gr. A from 1987 to 1990

Lancia Delta 4WD / Integrale 8V / BMW M3 2.3 E30 / Ford Sierra Cosworth 2WD Gr.N / Toyota Celica ST 165

Gr.BFront: Lancia Delta S4 / Audi Quattro Gr.B /

Ford Rs 200 Gr.B / Austin Metro Gr.B

Gr.BRear: Lancia Rally 037 / Lancia Delta S4 / Ford Rs 200 Gr.B /

Austin Metro Gr.B / Ferrari 308 / Porsche 911 Gr.B

Gr. A from 1987 to 1990

Lancia Delta Integrale 16V / Ford Sierra Cosworth 4WD / BMW M3 E30 2.3 / Subaru Legacy RS Turbo / Mazda 323 4WD

SIZE RANGE2 01 8

Nominal section width expressed in mm

Nominal external diameter expressed in mm

Nominal rim diameter, expressed in inches

235 610 16

Nominal section width expressed

in mm

Technical series.This expresses the ratio between the

section height (in mm) and the nominal section width (in mm)

Radial construction

Nominal rim diameter,

expressed in inches

225 45 R 16

TYRE IDENTIFICATIONThe markings that appear on the sidewall of the tyres indicate the basic size of the tyre and the rim diameter. The examples reported below illustrate how to read two different types of marking that appear on the sidewall of rally tyres.

C

h

d

D

Tread Width

Rim Width

MARKINGThe tread compounds of the different versions of P7TM Corsa Classic tyres are described by one letter followed by a number. The letter identify the type of tread: dry (D) or wet (W). The number after the letter indicates the compound: the smaller this number, the harder the compound.

For example: D 7 D – tread design 7 – compound level

RIMSThe size of the rims indicated in this manual must be respected. If you have any doubts, please contact Pirelli staff.

T EC H N I C A LI N FO R M AT I O N

C D d

C h/C d

T EC H N I C A LI N FO R M AT I O N

TREAD TEMPERATURESTemperatures measured on the tread are an excellent indicator for deciding the best choice of tread compound and for optimising the vehicle setup for each wheel position, such as camber and toe. We recommend measuring the temperature at three different points: inner (innermost side of the vehicle), centre, outer tread. In particular, average temperatures must be the ones suggested in the section “Ideal compounds for the best performance”, the difference between the values measured internally, in the center and externally must be maximum 20°C, while the difference between the front and rear axles must be no more than 25°C. If these values are exceeded, we recommend the use of a different tread compound or that the vehicle’s geometry should be adjusted.

PRESSUREWorking pressure values depend on the size of the tyre in relation to the load that it is subjected to. In other words, it will vary according to the type of car, the weight and conditions of use. In particular, as the weight of the vehicle, speeds and accelerations that the tyre is subjected to increase, the working pressure must be increased. In any case, tyres should not be used at pressures below 1.6 bar. Using excessively low pressures can cause damage to the tyre due to excess stress on the sidewall or unseating from the rim. “Hot” working pressures are usually in the range of 2.2 – 2.5 bar.

DELTA MAX 20°C

DELTAMAX 25°C

Initial inflation pressures vary in order to obtain these values, depending on whether the tyres are preheated or used “cold”. Indeed, preheated tyres can be inflated to slightly lower values than cold tyres. The difference will depend on the type of heater, the time it remains and the environmental conditions.

FITMENTMake sure that tyres are fitted by experts with specialised dedicated machinery and equipment, following the safety procedures. Before assembling the tyres, clean the surface of the beads and the area of the rim that comes into contact with the tyre.Use ONLY special tyre lubricants for mounting tyres. Do NOT use silicone or petroleum lubricants.Check the state of the valves to prevent air loss: check the seals and the tightness for metal ones and check also for any tears or cracks in rubber seals. If necessary, replace them. When the tyre is being used, always use the valve cap. Follow the indications provided on the sidewall of the tyre referring to the rolling direction and the correct positioning of the internal and external sidewalls, if specified. Use the safety cage when inflating tyres. Before unseating the tyre from the rim during dismounting, make sure that the tyre has been fully deflated, removing the inner valve mechanism.

Follow Pirelli on:

WWW.PIRELLI.COM

07.

18

your Dealer Pirelli