g2 couverture et pages didactiques - korrosjons- · pdf filegg2 couverture et pages...
TRANSCRIPT
www.kremlin-rexson.com
Selection Guide▪ AIRMIX® and AIRLESS
manual spray equipment▪ Hot spraying
G2 couverture et pages didactiqucouv1 couv1G2 couverture et pages didactiqucouv1 couv1 01/12/2008 11:50:0401/12/2008 11:50:04
G2 couverture et pages didactiqucouv2 couv2G2 couverture et pages didactiqucouv2 couv2 01/12/2008 11:50:1801/12/2008 11:50:18
▪ AIRMIX® and AIRLESSmanual spray equipment
▪ Hot spraying
EditorialEditorial
KREMLIN REXSON are delighted to present the product selection guide for AIRMIX® and AIRLESS manual spray equipment.
KREMLIN REXSON received the ISO 9001-certification accredited by LRQA for the design and manufacture of its range of paint application equipment. All equipment are ATEX and VOC compliant.
An energetic Research and Development policy has given KREMLIN REXSON the ability to provide the best solutions for most applications in the metal, wood, plastic and automotive markets.
KREMLIN REXSON products are designed with two objectives :
- to continuously innovate equipment to meet the needs of all new coating systems arriving in the market (water-based, high-solids, etc)
- to reduce operating costs whilst meeting new environmental concerns.
The quality of KREMLIN REXSON equipment is recognized worldwi-de, a statement which is borne out by the fact that 75% of its sales are exported. This powerful interna-tional presence allows KREMLIN REXSON to quickly respond to emerging market needs by deve-loping innovative new equipment.
Our new interactive Product Selection Guide will help you to select, the best, the right equipment and use it to its highest potential.
Please do not hesitate to contact your local distributor or a KREMLIN REXSON technical advisor.
They are there to help you find the best solution for all your needs.
G2 couverture et pages didactiqu1 1G2 couverture et pages didactiqu1 1 08/12/2008 11:54:3508/12/2008 11:54:35
2
SummarySummary
3
4-5
6-7
8-9
10
11
12
14
20
25
26
28
29
35
39
40
43
Performance of the paint spraying technologies
AIRMIX® spraying
AIRLESS spraying
Hot spraying
AIRMIX® guns
AIRMIX® aircaps and tips
Accessories fro AIRMIX® guns
AIRMIX® Intensives™ pumps
AIRMIX® FLOWMAX® pumps
AIRLESS guns
AIRLESS tip guard and tips
Accessories for AIRLESS spraying
AIRLESS Intensives™ pumps
AIRLESS FLOWMAX® pumps
Carts - Recommendations - Advices
Heaters
Accessories for hot spraying
G2 couverture et pages didactiqu2 2G2 couverture et pages didactiqu2 2 01/12/2008 11:50:3001/12/2008 11:50:30
3
Transfer efficiencyThe respective maximum tranfer efficiency rates are:
Paint velocityPaint velocity has a direct impact on performance: the higher the velocity, the greater the amount of overspray and bouncback, which quickly combine to pollute the spray booth.As can be seen from the graph, the particles speed with AIRMIX® is much lower than with all other systems.
Air consumptionAIRMIX® uses less air for atomization than any other spray system, which generates major savings in compressed air consumption and reduces air compressor maintenance.
PERFORMANCE OF PAINT SPRAYING PERFORMANCE OF PAINT SPRAYING TECHNOLOGIESTECHNOLOGIES
G2 couverture et pages didactiqu3 3G2 couverture et pages didactiqu3 3 01/12/2008 11:50:3201/12/2008 11:50:32
4
AIRMIXAIRMIX®® SPRAYING WITH FAN SPRAYING WITH FAN ADJUSTMENTADJUSTMENTPrincipeAIRMIX ® (1) was designed to create a new spraying technology which combines the advantages of the conventional and AIRLESS spraying technologies.
In order to do this, AIRMIX® associates middle pressure spraying and an indirect addition of atomization air (at a very low pressure), which leads to outstanding fan control. The outcome of this association is a supercharge of air at the locus of atomization, right after the outflow from the tip, which results in a perfectly controlled and adjustable fan.
(1) AIRMIX® is a registered trademark of KREMLIN.
without AIRMIX®
With the other medium pressure systems, the additional air is injected into or beyond the locus of atomization, which leads to turbulent air flows, more overspray and less finish quality.
with AIRMIX®
The additional air is injected before the locus of atomization, it results in a very stable fan and a perfectly even build on all sorts of parts to be sprayed.
Cold AIRMIX®
New AIRMIXNew AIRMIX®® spraying sprayingThe new AIRMIX® spraying technology optimises even more the advantages of conventional and AIRLESS spraying.
Hot AIRMIX®
The equipmentThe AIRMIX® range is designed for manual, automatic and electrostatic spraying. The use of AIRMIX® systems is opti-mised in a pressure range between 30 and 200 bar, which implies the use of pumps with a pressure ratio between 8 and 40.
A standard AIRMIX® equipment consists of a pump, a gun and two hoses.The pump is equipped with a suction rod, that is suitable for any containerThe gun is connected up to the pump by two hoses:• a small diameter, flexible, solvent-resistant fluid hose,• an antistatic rubber air hose for the atomization air.
G2 couverture et pages didactiqu4 4G2 couverture et pages didactiqu4 4 01/12/2008 11:50:3901/12/2008 11:50:39
A
A
A
A
5CYCLOMIXTM MULTIPU 2160F17.A2 FLOWMAX®20.1510.14/10.14S
KREMLIN, creator of the AIRMIX® technology launches its next generation AIRMIX® guns, which eliminate more than 80 % of overspray, reduce coating consumption by up to 50 % and offer an outstanding spraying quality. The new AIRMIX® concept was developed, bearing customers needs in mind, bringing many new benefits to the end-user. In addition to the exceptional adaptability offered by the fan adjustment system, KREMLIN has taken particular care over the ergonomics of the new MVX: a user-friendly grip on the handle, a lightweigth gun, a more flexible trigger, better visual controlon your application.
The advantages of AIRMIX The advantages of AIRMIX ®® PRODUCTSPRODUCTSRECOMMENDEDRECOMMENDED
Solvent or water-based Solvent or water-based products products VarnishesVarnishes LacquersLacquers PolyurethanesPolyurethanes Two-component productsTwo-component products High solidsHigh solids StainsStains UV-curingUV-curing
The MVX features a fan adjusting system to keep the same powerful and unsurpassed atomization quality whatever the shape of the part to be painted.
Feeding pumpsThe MVX gun can be fed by various pumps from the KREMLIN range
Outstanding finish quality Paint savings by 35% and
more Higher efficiency of application
for higher productivity Reduced overspray and particles
rebounds Reduced spray booth maintenance
Reduced solvents emission
Outstanding working conditions
A wide range of products adaptable to production needs
Quick payback
81% 81% TRANSFERTRANSFEREFFICIENCY !EFFICIENCY !
G2 couverture et pages didactiqu5 5G2 couverture et pages didactiqu5 5 09/01/2009 09:48:4509/01/2009 09:48:45
6
The advantages of AIRLESSThe advantages of AIRLESS High output
Low-dilution, high-viscosity products can be sprayed Thick coats can be deposited in one passage Low overspray
AIRLESS SPRAYINGAIRLESS SPRAYING
PrincipleAIRLESS spraying consists in making a fluid pass through a small tip, under high pressure.Atomization is processed only by this hydraulical pressure and without the need of additio-nal air.Only one fluid hose feeds the gun. The feeding pump must deliver a pressure com-prised between 90 and 60 bar, according to the application.
The following parameters are essential to achieve the desired quality finish: viscosity, particle size, fluid pressure, tipsize. The fluid needle of the gun is activated by the trigger that opens and closes.
The tungsten carbide tip is housed in an insert and fitted in front of the seat. If you spray quick dry paint or high solid materials, we recommend the use
of a reversible tip to ensure fast unblocking.
The fan only depends on the tip: the size of the orifice, expressed by its diameter, determines the tip and associated flow
rates of application; the angle at which the tip is milled determines the width of the fan.
Hose
AIRLESS spray gun
Filter with screenRod
AIRLESS pump
Paint
Tip
G2 couverture et pages didactiqu6 6G2 couverture et pages didactiqu6 6 01/12/2008 11:51:0801/12/2008 11:51:08
7
The AIRLESS pumpsThese pumps suck the material from a container and discharge it through a hose towards the gun, under high pressure.
The pumps operate by piston, their motors are pneumatic- (in most cases), electric- or gas-powered.Pneumatic piston pumps are equipped with an air motor, which makes the piston reciprocate.They are
defined by the pressure and output of product that they deliver. The product pressure is calculated by multiplying the incoming air pressure by the compression ratio of the pump. The product output is
calculated by multiplying the maximum number of cycles per minute by the capacity of the pump.
FiltrationFluid filtration is carried out in several areas of the pump, the fluid passing throug ever finer element mesh filters to prevent blockages in the tip of the gun:
The filter at the extremity of the suction rod is immersed in the paint container The AIRLESS filter is equipped with a screen that depends on the size of the tip and
filters the product as it flows out of the pump. A filter in the handle of the gun completes the product straining process. The usual
mesh size of this filter is about one third the diameter of the tip.
Pressure lossAIRLESS applications require long hoses and are meant for fairly viscous fluids. The loss of pressure in the hoses is therefore significant and should always be taken into account when you are selecting the pressure of the output from the pump.
There are two types of tips:
Reversible tips: recommended for quick unblocking. By manual reversion of the tip during a
few seconds and by pressing the trigger of the gun, the fluid pressure will drive the blockage out of the tip.
Flat tips: provide you with a very fine, perfectly steady fan that garantees the absence of “blotching”.
The AIRLESS tips
Reversible tip Flat tip
G2 couverture et pages didactiqu7 7G2 couverture et pages didactiqu7 7 01/12/2008 11:51:3301/12/2008 11:51:33
8
The advantages of hot paint spraying
PrincipleBy raising the temperature of a fluid, you reduce its viscosity: for instance, heating paint up to 60° or 80° C will have the same result as using solvent.
Hot paint spraying is also a good solution to maintain paints at a regular temperature, preserving them from thevariations of temperature in a workshop all and every day.
Apply more paint per passAs the discharged paint exits the gun , two factors raise the viscosity of the paints. The accelerated evaporation of the hot solvents and the cooling of the resin. The net effect is the ability to apply more paint per pass without runs..
Regularity of efficiency Solvent savings Reduction of the risk of runs
Better finish quality Reduction of the rejects due to dirt Faster preparation
Schéma 1
HOT SPRAYINGHOT SPRAYING
Temperature
Viscosity
The speed of circulation is usually adjusted to renew the content of each hose section every 30 seconds. Given a hose with a diameter of
10mm :
Its internal volume is about 80 cm3 per metre. Now, if we use a pump having a capacity of 20 cm3, we will have to operate valve on 7 or 9 to obtain a rythm of the pump of four strokes every 30 seconds, that is to say eight strokes per minute.
KREMLIN’s adviceKREMLIN’s advice
G2 couverture et pages didactiqu8 8G2 couverture et pages didactiqu8 8 01/12/2008 11:51:3701/12/2008 11:51:37
9
ProcessCold paint is discharged into the heater (4) under the action of pressure. It is instantly warmed to the selec-ted heat and reaches the spray gun (3) after passing through the filter (8) at a similar temperature.
Under pressure, the heated paint goes back to the suc-tion valve through the Y-fitting (5) and the fluid hose (6), which leads to the continuous circulation of the heated paint throughout the installation.This circulation process can be controlled by operating the circulation valve (7) or the back pressure regulator (9). However, using circulation too intensively is use-less and might also damage the packings ensuring the pump tightness. Do not forget that their lifespan is based on the total volume of paint that has circulated throughout the pump. It is always the same volume of paint, inside the hoses, that is heated. The paint in the container (2) remains cold.
As soon as the operator presses the trigger of the gun, hot paint flows out from the tip, which increases the flow rate: the pump (1) automatically sucks an equiva-lent unit of cold paint to be heated. But the temperature on the level of the gun remains unchanged since this unit of paint is instantly heated while passing through the heater (4). Whether the operator uses the system or not, it will ensure the delivery of hot paint to the gun.
Examples of hot paint application1. Thick coating material -Hot spraying between 60°C (140°F) and 70° C (158°F)
It makes it possible to spray paint without diluting it. It cools as soon as it leaves the gun and regain it original thicker consistency when deposited.
Only one pass is necessery, even when you apply thicker materials, which implies: lesser risk of runs - a glossier film - a less porous covering - no dilution costs - less pollution due to the use of solvents - greater facility to keep the film dustfree - the ideal system to use when the operator lacks experience.
2. Medium diluted paint.Hot spraying between 60°C (140°F) and 70° C (158°F)
Paint becomes extremely fluid.Therefore it can be sprayed at very low pressure. Besides, a major part of the solvents evaporates as the paint leaves the gun: its viscosity increases when it is deposited on the part at ambient temperature.Less overspray - less loss of paint- les-ser risk of runs - greater facility to keep the film dust-free - improved healthiness in the workshop - better temperature regulation - greater security of applica-tion.
3. Medium diluted paint.Hot spraying between 30°C (86°F) and 40° C (104°F)
The viscosity of the paint is slightly reduced.A lesser quantity of the solvents evapo-rates. Paint begins to cool as it leaves the gun.There is more security with this sort of application, because the temperature of the heated paint remains unchanged whatever the time in the day or the season may be - Keeping the film dust-free is also highly facilitated.
Schema 1Example of configuration with One-Pass hot spraying
Schema 2Example of configuration with HP, BD and AD hot spraying
G2 couverture et pages didactiqu9 9G2 couverture et pages didactiqu9 9 01/12/2008 11:51:4301/12/2008 11:51:43
10
KITS FOR AIRMIX® MVX SPRAY GUNS WITH SWIVEL FITTINGS
DescriptionAircap
TipDiameter
Hoses Length (m) Kit part numberType conductive fluid
hose (mm)non conductive fluid hose (mm)
MVX 60 VX 14 To be ordered separately (see
table)
4,8 6 x 8 7,5 151.260.882MVX 120 VX 14 4,8 6 x 8 7,5 151.260.883MVX 200 VX 14 4,8 6 x 8 7,5 151.260.884
SEAL KITSDescription Part numberSeal kit for MVX spray gun 129.679.901Repair kit for MVX spray gun (seal kit included) 129.679.902
CONFIGURATION OF THE AIRMIX® MVX SPRAY GUNS WITH SWIVEL FLUID AND QUICK AIR FITTINGS
Gun typeAircap Tip Maximum fluid
pressure (bar) Seat Part numberType size (mm)
MVX 60To be ordered separately (see table)
60 Polyacetal 129.670.300MVX 120 120 Stainless steel 129.670.400MVX 200 200 Carbide 129.670.500
SWIVEL FITTINGSFitting Air Inlet 6 x 8 (+ 6 x 8/F 1/4 NPS # air
reg.)Fluid Inlet M 1/2" JIC
STANDARD FITTINGSFitting Air Inlet M 1/4 NPS
Fluid Inlet M 1/2" JIC
SPECIFICATIONSSprayed materials Polyurethanes, water-based products, high solids,
two-components products, stains, lacquers, varnishes, etc...
Body of the gun Forged aluminumFluid Pressure Range (bar) 20 - 200Maximum air inlet pressure (bar) 6Recommended atomization air pressure (bar) 0,8 - 3Fluid output (l/mn) Depends on the tip usedWeight (g) 575Maximum Fluid Temperature (°C) 50Air consumption (m3/h) 5 - 7,5Wetted parts Stainless steel, PTFESafety Trigger lockFilter (fitted on fluid tube) #6 - 85 mesh/ 168μ
AIR
MIX
AIR
MIX
®® S
pra
y G
un
s S
pra
y G
un
sMVX GUNMVX GUNThis is the newest addition to the family of AIRMIX® guns and is now the standard in the industry. It has superior ergo-nomic design and uses the highest quality components for long lasting reliable performance. Most importantly, it opens a whole new world to users by putting in the hands of an Airmix® sprayer the ability to significantly vary the pattern without changing the tip while using minimal compressed air.
FEATURES BENEFITSErgonomic design and light trigger Less operator fatigue and improved
productivityQuick fan adjustment Ability to adjust the fan width to the shape
of the part to be painted leads to higher efficiency and productivity
Handle swivel fittingFlexible air hose
User friendly
Product fluid passages in stainless steel Compatible with most coatings including water-based, two components materials
New aircap and tip design Outstanding spraying quality with reduced overspray
Model shown with fluid swivel and quick air fittings
10-13 Pistolets et accessoires A10 1010-13 Pistolets et accessoires A10 10 17/11/08 10:03:4817/11/08 10:03:48
11
AIRCAPS FOR MX SPRAY GUNS (Ø 40 MM)BX 16 BX 36 BX 56 (non stick) BX 86
For MX, MRX, SX or JX spray gun 132.620.026 132.650.200 132.650.300 132.650.100
For MR spray gun 132.600.900 132.600.300 132.600.700 132.600.200Spraying quality Excellent Very good Good Very good
AIRCAPS FOR MVX SPRAY GUNS (Ø 35 MM)VX14 VX54
For MVX spray guns 132.670.020 132.670.030Adjustable fan Yes NoSpraying quality Excellent GoodTransfer efficiency Excellent ExcellentNon-stick coating No Yes
● Aircaps for AIRMIX® spray guns
● AIRMIX® tips# 134.5xx.xxx (replace the crosses by numbers read in the table)
(1) Tips recommended for an optimum fan adjustment with a VX14 aircap
Air
cap
s an
d t
ips
for
AIR
MIX
Air
cap
s an
d t
ips
for
AIR
MIX
®® s
pra
y g
un
s s
pra
y g
un
s
TABLE OF TIPS FOR WATER-BASED MATERIALS
Size Ø (mm)
Water output at 35 bar in l/mn
Water output at 70 bar in l/mn
Marking on gun
filter
Marking on pump
filter
Theoretical fan width at 25 cmMin. (VX14
aircap)Min. (BX16
aircap)
7 10 13 8 8 9 10 11
7 10 13 17 21 25 29 33
Max. (VX14 aircap)
Max. (BX16 aircap)
9 12 17 21 25 29 33 37
9 12 17 21 25 29 29 37
04 0.23 0.15 0.20 4 2 ou 4
Number engraved on
the tip
04.032 04.052 04.072 04.092(1) 04.112(1)
06 0.28 0.20 0.33 4 4 ou 6 06.032 06.052 06.072 06.092(1) 06.112(1) 06.132(1) 06.152(1)
09 0.33 0.30 0.45 6 6 ou 8 09.032 09.052 09.072 09.092(1) 09.112(1) 09.132(1) 09.152(1)
12 0.38 0.35 0.60 6 8 ou 12 12.072 12.092(1) 12.112(1) 12.132(1) 12.152(1) 12.172(1)
14 0.41 0.40 0.72 12 8 ou 12 14.052 14.072 14.092(1) 14.112(1) 14.132(1) 14.152(1) 14.172(1)
TABLE OF TIPS FOR SOLVENT-BASED MATERIALS
Size Ø (mm)
Water output at 35 bar in l/mn
Water output at 70
bar in l/min
Marking on gun
filter
Marking on pump
filter
Theoretical fan width at 25 cmMin. (VX14
aircap)Min.(BX16
aircap)
7 10 13 8 8 9 10 11 38
7 10 13 17 21 25 29 33 38
Max. (VX14 aircap)
Max. (BX16
9 12 17 21 25 29 33 37 44
9 12 17 21 25 29 29 37 44
02
Number engraved on
the tip
02.034 02.05403 0.18 0.10 0.15 4 2 03.034 03.054 03.07404 0.23 0.15 0.20 4 2 ou 4 04.034 04.054 04.074 04.094(1) 04.114(1) 04.134(1)
06 0.28 0.20 0.33 4 4 ou 6 06.034 06.054 06.074 06.094(1) 06.114(1) 06.134(1) 06.154(1)
09 0.33 0.30 0.45 6 6 ou 8 09.034 09.054 09.074 09.094(1) 09.114(1) 09.134(1) 09.154(1)
12 0.38 0.35 0.60 6 8 ou 12 12.074 12.094(1) 12.114(1) 12.134(1) 12.154(1) 12.174(1)
14 0.41 0.40 0.72 12 8 ou 12 14.054 14.074 14.094(1) 14.114(1) 14.134(1) 14.154(1) 14.174(1)
18 0.48 0.45 0.85 12 12 18.134(1) 18.154(1) 18.174(1)
20 0.50 0.50 1.06 12 12 20.074 20.094 20.114 20.134 20.154 20.174 20.19425 0.56 0.65 1.33 12 15 25.13430 0.61 0.75 1.6 12 15 30.114 30.134 30.154 30.174 30.19445 0.73 1.15 2.3 12 20 45.114 45.154 45.174 45.194
10-13 Pistolets et accessoires A11 1110-13 Pistolets et accessoires A11 11 17/11/08 10:03:5217/11/08 10:03:52
12
PACKS PART NUMBERDescription Quantity Part numberEasy-adjust seals for MVX spray guns x 2 129.670.075Aircap ring seals for MVX spray guns x 10 150.040.330Aircap ring seals for MXLT spray guns x 10 150.040.309
PART NUMBERS
DescriptionNozzles
Quantity Part numberSize (mm)
Unclogging needles0,6 - 0,9
12 000.094.000
0,9 000.094.002
PART NUMBERSTip size Microscreen (99 μ) (pack of 10) PTFE O'ring seals (pack of 10)02-03-04-06 129.609.901 -09 and above - 129.529.903
PART NUMBERSDescription Product hole (mm) Length (m) Part numberHoses Sleeve 40 10 129.270.087
● Hose sleeve
● Microscreens and tip seals
● Tip Cleaning Needles
● Aircap seals
● Seats for spray guns
SEALS FOR AIRMIX® GUN SEATSDescription Quantity Part numberSeals for stainless steel and carbide seats 10 129.629.922
SEATS FOR MXLT SPRAY GUNSType Quantity Part numberPolyacetal seats 10 129.609.911Stainless steel seats and seals 2 129.629.923Carbide seats and seals 2 129.659.904
SEATS FOR MVX SPRAY GUNSType Quantity Part numberPolyacetal seats 10 129.679.904Stainless steel seats and seals 2 129.679.905Carbide seats and seals 2 129.679.906
Acc
esso
ries
Acc
esso
ries
10-13 Pistolets et accessoires A12 1210-13 Pistolets et accessoires A12 12 17/11/08 10:04:1817/11/08 10:04:18
13
● Gun fluid filter screenPART NUMBERSStainless steel screen for filter Size (μ) Quantity Part number
N° 4 1005
129.609.907N° 6 168 129.609.908N° 12 280 129.609.909
ADJUSTING NEEDLE VALVESDescription Part numberAdjusting needle for MVX, MXLT (MF 1/4") spray guns 050.070.190
● Adjusting needles valvesFor air adjustment.
EXTENSIONS FOR MVX SPRAY GUNSDescription Length in mm Part numberStraight extension 250 075.800.011Straight extension 400 075.800.012Elbow extension (45° angle) 250 075.850.011
EXTENSIONS FOR MXLT SPRAY GUNSDescription Length in mm Part numberStraight extension 250 075.800.001Straight extension 400 075.800.002Extension, elbow 45° 250 075.850.001
● Extensions for Airmix® spray guns AIRMIX® spray guns can be fitted with extensions in order to spray inaccessible areas.
● Adaptor to feed two or three guns
ADAPTOR TO FEED TWO OR THREE GUNSDescription Part numberTwo guns divider 051.319.905
To supply 2 guns with air and solvent-based paint including shut-off valves and an extra-port to fit a third gun.
TWO-GUN SYSTEMDescription Material Part numberAir Y-fitting 1/4" NPS Stainless steel 129.029.920Elbow fitting 3/8" NPT - 1/2" JIC to fit on he second fluid filter outlet Stainless steel 905.210.603
● Y-fitting for one-gun supplyFluid circuit : remove the plug of the second fluid filter outlet and connect the elbow fitting.Air circuit : add the Y-fitting to the outlet of the grey air regulator on the pump.
Acc
esso
ries
Acc
esso
ries
10-13 Pistolets et accessoires A13 1310-13 Pistolets et accessoires A13 13 17/11/08 10:04:4217/11/08 10:04:42
14
Inte
nsi
veIn
ten
sive
TM
TM A
IRM
IX A
IRM
IX®® p
um
ps
pu
mp
sSELECTION TABLESELECTION TABLE
SELECTION TABLE
Type of pump IntensivesTM
10.14 20.15 20.25 20.50
Construction
Stainless steel ● ● ● ●
Mounting
Wall-mounted ● ● ● ●
Cart-mounted ● ● ● ●
Portable ● ● ❍ ❍
For hot circulation ❍ ❍ ● ❍
Dimensions (wall-mounted pump without filter or suction rod)
Height (mm) 410 430 820 840
Width (mm) 292 240 350 470
Depth (mm) 170 270 210 270
Weight (kg) 5,5 9 22 30
Type of motor air / fluid section
Air motor 340-2 700-2 500-4 1000-4
Stroke of motor (mm) 45 55 100 100
Hydraulic section 14 15 25 50
Characteristics
Pressure ratio 10/1 20/1 20/1 20/1
Output per cycle (cc) 18 22 50 100
Number of cycles (per liter) 55 45 20 10
Ouput at 30 cycles/mn. (L) 0.53 0.66 1.5 3
Free output per minute (L) 1.1 1.32 3 6
Max. fluid pressure (bar) 60 120 120 120
Max. paint temperature (°C) 60 60 60 60
Operating air pressure (bar) 1-6 1-6 1-6 1-6
Max. air cons. at 30cycles/mn and 4 bar (Nm3/h)(1) 1,9 4,8 10,8 21,6
● : Available ❍ : Optional
(1) Air consumption (Nm3/h) = (1,2 x (output at 20 or 30 cycles in l/mn) x (compression ratio) x (air motor pressure + 1 bar) x 60) / 1000
14-24 Pompes AIRMIX®_GB.indd 1414-24 Pompes AIRMIX®_GB.indd 14 1/12/08 13:39:021/12/08 13:39:02
15
AIRMIX® 10.14 PUMP - "START" KIT WITH STANDARD FITTING MVX AND 5 M AIR AND FLUID HOSES
Set-upAircap
Tip Suction rod Drain rod Air adjusting needle valve
Fluid pressure air regulator
Pump output filter Part number
Type
10.14S VX 14 To be ordered separately ● - ● ● - 151.260.290
SEAL KITSDescription Part numberSeal kit for H14 144.850.190repair kit for H14 144.850.191Repair kit for 340/2 air motor 144.850.150
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 18 x 125
Fluid Outlet M 1/2 JIC
SPECIFICATIONSPressure ratio 10/1Fluid volume per cycle (cm3) 18Number of cycles per litre of products 55Fluid Output at 30 cycles/mn (l/mn) 0,53Air consumption (m3/h) at 30 cycles/mn at 4 bar 1,9Free flow rate (L/mn) 1,1Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 60Maximum Fluid Temperature (°C) 60Sound level (dBA) 80Sealing Packings Upper sealing Stainless steel cartridge with GT
sealingLower sealing PFA seals
Weight (kg) (w/o support or rods) 5,30Wetted parts Stainless steelHeight (cm) 40,5Width (cm) 30,5Depth (cm) 17,8
Inte
nsi
veIn
ten
sive
TM
TM A
IRM
IX A
IRM
IX®® p
um
ps
pu
mp
s
AIRMIXAIRMIX®® 10.14 - "START PUMP" 10.14 - "START PUMP"
This is the new entry level Airmix® pump. It uses the same high efficiency and environmentally firendly technology that is found on the 10.14 pump. This pump is ideal for small to hobbyist shops that can benefit from the power of Airmix®.
FEATURES BENEFITSSmall fluid section and suction rod Less product loss during color-changing
and pump flushingThe gun/pump kit works with a compressor of 1.5 HP
Reduction of operational costs
Simple design, reduced number of spare parts
Easy maintenance
Compact design Fits in small working areas
Pump supplied with MVX gun and hoses (not shown on the photo)
14-24 Pompes AIRMIX®_GB.indd 1514-24 Pompes AIRMIX®_GB.indd 15 1/12/08 13:39:051/12/08 13:39:05
16
AIRMIX® 10.14 PUMP KITS WITH SWIVEL FITTING MVX
Kit designation Gun typeAircap
Tip Suction rod Hoses Length(m) Pump output filter Funnel Part number
Type10.14 wall-mounted MVX 60 VX 14 To be ordered
separately ● 7,5 - - 151.260.885
10.14 wall-mounted MVX 120 VX 14 To be ordered
separately ● 7,5 - - 151.260.886
10.14 wall-mounted MVX 200 VX 14 To be ordered
separately ● 7,5 - ● 151.260.887
CONFIGURATION OF THE AIRMIX® 10.14 PUMP - STAINLESS STEEL
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Filter pump outlet Part number
Wall mounted
● - ● ● - 051.665.000
On one-arm cart 051.665.200Portable(1) 151.662.300
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 18 x 125
Fluid Outlet M 1/2 JIC
SPECIFICATIONSPressure ratio 10/1Fluid volume per cycle (cm3) 18Number of cycles per litre of products 55Fluid Output at 30 cycles/mn (l/mn) 0,53Air consumption (m3/h) at 30 cycles/mn at 4 bar 1,9Free flow rate (L/mn) 1,1Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 60Maximum Fluid Temperature (°C) 60Sound level (dBA) 80Sealing Packings Upper sealing Stainless steel cartridge with GT
sealingLower sealing PFA seals
Weight (kg) (w/o support or rods) 5,45 (wall mounted without rod)Wetted parts Stainless steelHeight (cm) 40,5Width (cm) 30,5Depth (cm) 17,8
Inte
nsi
veIn
ten
sive
TM
TM A
IRM
IX A
IRM
IX®® p
um
ps
pu
mp
sAIRMIXAIRMIX®® 10.14 - STAINLESS STEEL 10.14 - STAINLESS STEELFeeding of one gun for intensive works. High efficiency and environmentally firendly technology. Ideal for wood, metal and plastics markets.
FEATURES BENEFITSOptimized fluid section and suction rod Less product loss during color-changing
and pump flushingThe gun/pump kit works with a compressor of 1.5 HP
Reduction of operational costs
Simple design, reduced number of spare parts
Easy maintenance
Compact design Fits in small working areas
SEAL KITSDescription Part numberSeal kit for H14 144.850.190repair kit for H14 144.850.191Repair kit for 340/2 air motor 144.850.150
(1) Option : 2 liters gravity funnel and support : 151.665.630
Portable version
14-24 Pompes AIRMIX®_GB.indd 1614-24 Pompes AIRMIX®_GB.indd 16 1/12/08 13:39:131/12/08 13:39:13
17
FITTINGSFitting Air inlet (valve) F 3/8 BSP
Air outlet (atomization air) M 1/4 NPSFluid Inlet M 26 x 125
Fluid Outlet M 1/2 JIC
SPECIFICATIONSPressure ratio 20/1Fluid volume per cycle (cm3) 22Number of cycles per litre of products 45Fluid Output at 30 cycles/mn (l/mn) 0,66Free flow rate (L/mn) 1,32Air consumption (m3/h) at 30 cycles/mn at 4 bar 4,8Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 120Maximum Fluid Temperature (°C) 60Sound level (dBA) 82Sealing Packings Upper sealing GT cartridge with polyethylene
packingLower sealing PFA sealing
Weight (kg) - wall-mounted pump w/o rods 9Wetted parts Stainless steelHeight (cm) 45,7Width (cm) 35,6Depth (cm) 20,3
Inte
nsi
veIn
ten
sive
TM
TM A
IRM
IX A
IRM
IX®® p
um
ps
pu
mp
s
AIRMIXAIRMIX®® 20.15 PUMP - STAINLESS STEEL 20.15 PUMP - STAINLESS STEELA multi-purpose, very quiet pump designed to deliver thicker coatings (up to 9000 cps) to a single spray gun in either wood, metal, or plastic finishing applications.
FEATURES BENEFITSAll stainless steel construction Compatible with water-based materialsLarge diameter suction rod and high compression ratio
Use with a large number of materials
The gun/pump kits work with a compressor of 2 HP
Reduction of operational costs
Simple design, reduced number of spare parts
Easy maintenance
Compact design Fits in small working areas
(with 6 L funnel as an option)
6L FUNNELDesignation Part number6l funnel (26x125 inlet) - for mounting on one-arm cart 151.890.300
CONFIGURATION OF THE AIRMIX® 20.15 PUMPS
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Pump output filter Part number
Wall mounted -
- ● ● -
151.890.150
Wall mounted ● 151.890.060
On one arm cart ● 151.890.250
Portable ● 151.890.200
SEAL KITSDescription Part numberH15 Seal kit 144.030.091H15 Maintenance kit 144.030.092H15 Rebuilding kit 144.030.093Repair kit for 700-2 air motor 144.030.090
Kit designation Gun typeAircap Stainless steel
One-pass heater Tip Suction rod Hoses Length (m) Filter Part number
Type
20.15 wall-mounted MVX 120 VX 14 - To be ordered separately ● 7,5 - 151.260.888
20.15 hot spraying wall-mounted MVX 120 VX14 ●
To be ordered separately ● 7,5 - 151.260.816
KIT FOR AIRMIX® 20.15 PUMPS WITH SWIVEL FITTING MVX
14-24 Pompes AIRMIX®_GB.indd 1714-24 Pompes AIRMIX®_GB.indd 17 1/12/08 13:39:171/12/08 13:39:17
18
SEAL KITSDescription Part numberH25 GT seal kit 144.950.091H25 GT repair kit 144.950.096Seal kit for 500-4 air motor 146.260.990Repair kit for 500-4 air motor 146.260.995
CONFIGURATION OF AIRMIX® 20.25 PUMPS
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
●
● ●
● 151.770.100
Wall mounted - - 151.770.2001 arm cart-mounted ● ● 151.770.150
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 26 x 125
Fluid output (filter) M 1/2" JIC
SPECIFICATIONSPressure ratio 20/1Fluid volume per cycle (cm3) 50Number of cycles per litre of products 20Fluid Output at 30 cycles/mn (l/mn) 1,5Free flow rate (L/mn) 3Air consumption (m3/h) at 30 cycles/mn at 4 bar 10,8Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 120Maximum Fluid Temperature (°C) 60Sound level (dBA) 78Sealing Packings Upper sealing Polyfluid + PTFE G
Lower sealing GT sealingWeight (kg) 17Wetted parts Stainless steelHeight (cm) 83,8Width (cm) 35,6Depth (cm) 17,78
Inte
nsi
veIn
ten
sive
TM
TM A
IRM
IX A
IRM
IX®® p
um
ps
pu
mp
sAIRMIXAIRMIX®® 20.25 PUMP - STAINLESS STEEL 20.25 PUMP - STAINLESS STEELIdeal for feeding one or two Airmix® spray guns or one gun in a heated circulation loop for small to medium production shop, the 20.25 can pump a variety of coatings. The pump comes with the pump regulator, atomization regulator, and filter.
FEATURES BENEFITSLarge diameter suction rod and high compression ratio
Use with a large number of materials
All stainless steel construction Compatible with water-based materialsSimple design, reduced number of spare parts
Easy maintenance
Model shown on a two-arm cart
Kit designation Gun typeAircap
Tip Heater Hoses Length (m) Pump output filter Part numberType
20.25 Wall-mounted MVX 120VX14 To be ordered
separately
-7,5
● 151.260.889
20.25 Wall-mounted Hot spraying MVX 120 ●
(AD60) ● 151.260.890
KITS FOR AIRMIX® 20.25 PUMPS WITH SWIVEL FITTING MVX
14-24 Pompes AIRMIX®_GB.indd 1814-24 Pompes AIRMIX®_GB.indd 18 1/12/08 13:39:231/12/08 13:39:23
19
Inte
nsi
veIn
ten
sive
TM
TM A
IRM
IX A
IRM
IX®® p
um
ps
pu
mp
s
AIRMIXAIRMIX®® 20.50 PUMP - STAINLESS STEEL 20.50 PUMP - STAINLESS STEELThe 20.50 pump is ideal for large production shops where medium to heavy bodied materials will be fed to multiple guns from one fluid supply.
FEATURES BENEFITSSimple design, reduced number of spare parts
Easy maintenance
Large diameter suction rod and high compression ratio
Use with a large number of materials
All stainless steel construction Compatible with water-based products
SPECIFICATIONSPressure ratio 20/1Fluid volume per cycle (cm3) 100Number of cycles per litre of products 10Fluid Output at 30 cycles/mn (l/mn) 3Free flow rate (L/mn) 6Air consumption (m3/h) at 30 cycles/mn at 4 bar 21,6Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 120Maximum Fluid Temperature (°C) 60Sound level (dBA) 78Sealing Packings Upper sealing Polyfluid + PTFE G
Lower sealing GTWeight (kg) 22Wetted parts Stainless steelHeight (cm) 86,4Width (cm) 35,6Depth (cm) 28
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 26 x 125
Fluid output (filter) M 1/2" JIC
CONFIGURATION OF AIRMIX® 20.50 PUMPS
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
●
● ●
● 151.780.200
Wall mounted - - 151.780.100
On one-arm cart ● ● 151.780.400
SEAL KITSDescription Part numberH50 GT seal kit 144.960.091H50 GT repair kit 144.960.096Seal kit for 1000-4 air motor 146.270.991Repair kit for 1000-4 air motor 146.270.995
14-24 Pompes AIRMIX®_GB.indd 1914-24 Pompes AIRMIX®_GB.indd 19 1/12/08 13:40:181/12/08 13:40:18
20
SELECTION TABLE
Pump type Flowmax® Bellow superlifeTM
17.A2 20.15 F 20.25 F 20.50 F
Construction
Stainless steel ● ● ● ●
Configuration
Wall-mounted ● ● ● ●
Cart-mounted ● ❍ ● ●
Dimensions (wall-mounted pump without filter or suction rod)
Height (mm) 622 570 970 975
Width (mm) 330 240 350 470
Depth (mm) 211 285 210 270
Weight (kg) 20 11,5 30 35
Air motor/fluid section
Air motor 1 000-2 700-2 500-4 1 000-4
Stroke of air motor (mm) 50 55 100 100
Fluid section 30 S 15 F 25 F 50 F
Specifications
Pressure ratio 17/1 20/1 20/1 20/1
Output per cycles (cc) 60 22 50 100
Number of cycles (per litre) 16 45 20 10
Output at 30 cycles/mn. (L) 1,8 0,66 1,5 3
Free output per minute (L) 3,6 1,32 3 6
Max. fluid pressure (bar) 102 60 120 120
Max. paint temperature (°C-°F) 50 50 50 50
Operating air pressure (bar) 1-6 2-6 1-6 1-6
Max. air consumption at 30 cycles/mn under 4 bar (Nm3/h)(1) 11 4,8 10,8 21,6
AIR
MIX
AIR
MIX
®® F
low
max
Flo
wm
ax®® p
um
ps
pu
mp
sSELECTION TABLE - FLOWMAXSELECTION TABLE - FLOWMAX®® PUMPSPUMPS● Exclusive precisely machined SuperLife Bellows replaces the traditional leaky
packings● Delivers a wide range of pressures without the use of fluid regulators● The fluid inlet is located on the upper end of the fluid section making the pump
easier to service ● Contains single lip seals with automatic wear take-up for high up-time and
minimal maintenance● Unique SuperQuiet air motor changeover with very high and reliable perfor-
mance● All stainless steel fluid sections suitable for a wide variety of fluids● Easy access to wearing parts due to a tie rod free design
The exclusive Flowmax® SuperLife Technology is available only with Kremlin. Nothing of similar pressure and fluid output in the piston pump design outperforms the Flowmax® SuperLife techno-logy. Flowmax® pumps substantially outlast standard piston pumps using self-adjusting seals. In addition there is no lubricant cup, thus eliminating packings. In sum, this is a packing-free pump that performs quietly with minimal service. Nothing Compares !
● : Available ❍ : Optional
(1) Air consumption (Nm3/h) = (1,2 x (output at 20 or 30 cycles in l/mn) x (compression ratio) x (air motor pressure + 1 bar) x 60) / 1000
14-24 Pompes AIRMIX®_GB.indd 2014-24 Pompes AIRMIX®_GB.indd 20 1/12/08 13:41:131/12/08 13:41:13
21
AIR
MIX
AIR
MIX
®® F
low
max
Flo
wm
ax®® p
um
ps
pu
mp
s
FLOWMAXFLOWMAX®® AIRMIX AIRMIX®® 17.A2 PUMP - 17.A2 PUMP - STAINLESS STEELSTAINLESS STEELUnique design with external valves for an easy maintenance. Flowmax® technology ensures total sealing. Quick inver-sion of this pump allows for a perfectly stable fan shape at the gun.Performance, extended lifetime, reliability.
FEATURES BENEFITSExternal valves assemby Easy maintenanceFloating piston Fast inversions and very high efficiencySealing ensured by a SuperlifeTM bellow seal High reliability
No more lubricant cupsLeak freeTotal sealing between pump and its environment, ideal to work with isocyanates catalystsCompatible with UV and pre-catalyzed products
All stainless steel construction Compatible with water-based materialsLarge and smooth fluid passages Fluid discharge without retention of a wide
range of coating materialsBalanced fluid section Constant fluid output pressure
SPECIFICATIONSPressure ratio 17/1Fluid volume per cycle (cm3) 60Number of cycles per litre of products 16Fluid Output at 30 cycles/mn (l/mn) 1,8Free flow rate (L/mn) 3,6Air consumption (m3/h) at 30 cycles/mn at 4 bar 11Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 100Maximum Fluid Temperature (°C) 50Sound level (dBA) 74Sealing packing Bellows Polyethylene
Upper and lower GT polyethyleneWeight (kg) - wall-mounted 20Wetted parts Stainless steelHeight (cm) 62,2Width (cm) 33Depth (cm) 21
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 26 x 125
Fluid output (filter) M 1/2 JIC
CONFIGURATION OF THE FLOWMAX® AIRMIX® 17.A2 PUMP
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressureair regulator Pump output filter Part number
Wall-mounted 17.A2 Flowmax® pump
● ● ● ● ● 151.730.700
1 arm cart 17.A2 Flowmax® pump ● ● ● ● ● 151.730.750
SEAL KITSDescription Part numberSeal kit for A2 fluid section 144.910.799Repair kit for A2 fluid section 144.910.797Seal kit for external valves 144.910.798Seal kit for 1000-2 air motor 144.919.904Repair kit for 1000-2 air motor 144.919.914
Kit designation Gun type Tip Supplied with aircap Suction rod Hoses Length (m) Filter Part number
Flowmax® 17.A2Wall-mounted MVX 120 To be ordered
separately VX14 ● 7,5 ● 151.260.892
KITS FOR FLOWMAX® AIRMIX® 17.A2 PUMPS WITH SWIVEL FITTING MVX
14-24 Pompes AIRMIX®_GB.indd 2114-24 Pompes AIRMIX®_GB.indd 21 1/12/08 13:41:251/12/08 13:41:25
22
AIR
MIX
AIR
MIX
®® F
low
max
Flo
wm
ax®® p
um
ps
pu
mp
sFLOWMAXFLOWMAX®® AIRMIX AIRMIX®® 20.15F PUMP 20.15F PUMP STAINLESS STEELSTAINLESS STEELThe new generation of AIRMIX® pump, benefiting of the Flowmax® technology. Designed for fluid to semi-fluid materials.
FEATURES BENEFITSSealing done by one bellow High reliability
Total sealing between pump and its environment, ideal to work with isocyanates catalystsNo fluid leakagesIdeal for UV and pre-catalyzed materialsNo lubricant needed
Stainless steel design Compatible with water-based materialsLarge diameter suction rod and high compression ratio
Use with a large number of materials
The gun/pump kits work with a compressor of 2 HP
Reduction of operational costs
Simple design, reduced number of spare parts
Easy maintenance
Compact design Fits in small working areas
SPECIFICATIONSPressure ratio 20/1Fluid volume per cycle (cm3) 22Number of cycles per litre of products 45Fluid Output at 30 cycles/mn (l/mn) 0,66Free flow rate (L/mn) 1,32Air consumption (m3/h) at 30 cycles/mn at 4 bar 4,8Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 120Maximum Fluid Temperature (°C) 50Sound level (dBA) 80Sealing packing Bellows Polyethylene
Upper and lower GT cartridge with polyethylene packing. PFA seal.
Weight (kg) - wall-mounted pump w/o rods 11,5Wetted parts Hard chromed stainless steel,
stainless steelHeight (cm) 57Width (cm) 24Depth (cm) 28,5
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 18 x 125
Fluid Outlet M 1/2 JIC
CONFIGURATION OF THE AIRMIX® 20.15 F PUMPS
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Filter pump outlet Part number
Wall-mounted - - ● ● - 151.890.500
Wall-mounted ● - ● ● - 151.890.550
On one arm cart(1) ● - ● ● - 151.890.560
6L FUNNELDesignation Part number6l funnel (18x125 inlet) - for mounting on 1 arm cart 151.890.350
SEAL KITSDescription Part numberSeal kit H15F 144.030.420Repair kit H15F 144.030.421Repair kit for 700-2 air motor 144.030.090
(1) As an option : 6 litre funnel
KIT FOR AIRMIX® 20.15F PUMPS WITH SWIVEL FITTING MVX
Kit designation Gun typeAircap
Tip Suction rod Hoses Length (m) Filter Funnel Part number
Type
20.15F Wall-mounted MVX 120 VX 14 To be ordered separately ● 7,5 - - 151.260.950
14-24 Pompes AIRMIX®_GB.indd 2214-24 Pompes AIRMIX®_GB.indd 22 1/12/08 13:41:271/12/08 13:41:27
23
AIR
MIX
AIR
MIX
®® F
low
max
Flo
wm
ax®® p
um
ps
pu
mp
s
FLOWMAXFLOWMAX®® AIRMIX AIRMIX®® 20.25 F PUMP 20.25 F PUMP STAINLESS STEELSTAINLESS STEELUniversal AIRMIX® pump for use with all materials, including water-based and high solids.
FEATURES BENEFITSSealing done by one large stroke bellow High reliability
No more lubricant cupsNo fluid leakagesTotal sealing between pump and its environment, ideal to work with isocyanates catalystsIdeal for UV and pre-catalyzed materials
Ergonomic design of fluid passages Fluid discharge without retention of a wide range of coating materials
All stainless steel construction Compatible with water-based materialsBalanced fluid section Constant fluid output pressureMobile piston seal Excellent suction capacity
SPECIFICATIONSPressure ratio 20/1Fluid volume per cycle (cm3) 50Number of cycles per litre of products 20Fluid Output at 30 cycles/mn (l/mn) 1,5Free flow rate (L/mn) 3Air consumption (m3/h) at 30 cycles/mn at 4 bar 10,8Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 120Maximum Fluid Temperature (°C) 50Sound level (dBA) 80Sealing packing Bellows Polyethylene
Upper and lower GT PolyethyleneWeight (kg) - wall-mounted 22Wetted parts Stainless steelHeight (cm) 99,1Width (cm) 48,3Depth (cm) 28
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 26 x 125
Fluid output (filter) M 1/2" JIC
CONFIGURATION OF THE FLOWMAX® AIRMIX® 20.25F - STAINLESS STEEL
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
-
● ●
- 151.771.100
Wall mounted ● ● 151.771.200
2 arms Cart-mounted ● ● 151.771.400
SEAL KITSDescription Part numberSeal kit H25F 144.950.291Repair kit H25F 144.950.292Seal kit for 500-4 air motor 146.260.990Repair kit for 500-4 air motor 146.260.995
KIT FOR FLOWMAX® AIRMIX® 20.25 F PUMPS WITH SWIVEL FITTING MVX
Kit designation Gun type Supplied with aircap Tip Suction rod Hoses Length (m) Filter Part number
20.25 F wall-mounted MVX 120 VX 14 To be ordered
separately ● 7,5 ● 151.260.893
14-24 Pompes AIRMIX®_GB.indd 2314-24 Pompes AIRMIX®_GB.indd 23 1/12/08 13:41:291/12/08 13:41:29
24
AIR
MIX
AIR
MIX
®® F
low
max
Flo
wm
ax®® p
um
ps
pu
mp
sFLOWMAXFLOWMAX®® AIRMIX AIRMIX®® 20.50F PUMP 20.50F PUMP STAINLESS STEELSTAINLESS STEEL
Model shown : 20.25 F
Universal AIRMIX® pump for use with all materials, including water-based and high solids.
FEATURES BENEFITSSealing done by one large stroke bellow High reliability
No more lubricant cupsNo fluid leakagesTotal sealing between pump and its environment, ideal to work with isocyanates catalystsIdeal for UV and pre-catalyzed materials
Ergonomic design of fluid passages Fluid discharge without retention of a wide range of coating materials
All stainless steel construction Compatible with water-based materialsBalanced fluid section Constant fluid output pressureMobile piston seal Excellent suction capacity
SPECIFICATIONSPressure ratio 20/1Fluid volume per cycle (cm3) 100Number of cycles per litre of products 10Fluid Output at 30 cycles/mn (l/mn) 3Free flow rate (L/mn) 6Air consumption (m /h) at 30 cycles/mn at 4 bar 21,6Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 120Maximum Fluid Temperature (°C) 50Sound level (dBA) 76Sealing packing Bellows Polyethylene
Upper and lower GT PolyethyleneWeight (kg) - wall-mounted 27Wetted parts Stainless steelHeight (cm) 97,5Width (cm) 47Depth (cm) 27
FITTINGSFitting Air inlet (valve) F 3/8" BSP
Air outlet (atomization air) M 1/4" NPSFluid Inlet M 26 x 125
Fluid output (filter) M 1/2" JIC
CONFIGURATION OF THE FLOWMAX® AIRMIX® 20.50F - STAINLESS STEEL
Set-up Suction rod Drain rod Atomization air regulator
Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
- ● ● - 151.781.100
Wall mounted ● ● ● ● 151.781.200
2 arms Cart-mounted ● ● ● ● 151.781.400
SEALS KITSDescription Part numberSeal kit H 50F 144.960.291Repair kit H 50F 144.960.292Seal kit for 1000-4 air motor 146.270.991Repair kit for 1000-4 air motor 146.270.995
14-24 Pompes AIRMIX®_GB.indd 2414-24 Pompes AIRMIX®_GB.indd 24 1/12/08 13:41:331/12/08 13:41:33
25
KITS FOR AIRLESS M250 AND M350 SPRAY GUNS
Kit designationDiameter
Hoses Length (m) Kit part numberconductive fluid hose (mm)
M250 gun6,35
5 151.245.40010 151.245.500
M350 gun5 151.246.40010 151.246.500
SEAL KITSDescription Part numberRepair kit for AIRLESS M250 spray guns 922.004.407Repair kit for AIRLESS M350 spray guns 922.005.007
SPECIFICATIONSSprayed materials Corrosion-resistant products, primers, fillers, epoxy...Body of the gun AluminumMaximum fluid pressure (bar) 250/350Maximum Fluid Temperature (°C) 50Wetted parts AluminumNeedle CarbideTip Reversible 517Weight (g) 540Handle filter Easily removable without keySeat Carbide
● M250 and M350 AIRLESS spray guns Recommended for quality AIRLESS industrial applications
FEATURES BENEFITSErgonomic design Very comfortable handle and triggerTungsten carbide needle and seat Rugged constructionRemovable handle filter Quick maintenanceHandle swivel fitting Important flexibility
AIR
LE
SS
Sp
ray
gu
ns
AIR
LE
SS
Sp
ray
gu
ns
CONFIGURATION OF THE M250 AND M350 SPRAY GUNS
Gun typeReversible tip
Maximum fluid pressure (bar) Spray gun Part numberSize (mm)
M 250 517 250 922.044.512M 350 517 350 922.050.512
iiKREMLIN's adviceKREMLIN's adviceChoosing the nozzle is best done by crossing the desired width of the fan at a distance of 30cm/12 inches with the given output of water at 140 bar/2000psi. If your ideal output lies between two of the values, we would recommend that you opt for the higher of the two output values.
25-28 Pistolets et accessoires 25 2525-28 Pistolets et accessoires 25 25 17/11/08 10:08:0217/11/08 10:08:02
26 SEAL KITDescription Quantity Part numberTip seals 8 922.004.018
TIP GUARDS FOR FLAT TIPSDescription Safety guard Part number
M250/M350 KREMLIN - thread tip guard
● 922.004.202
- 050.273.303
REPAIR KITDescription Part numberRepair kit with piston and spring 922.550.201
SEAL KITDescription Quantity Part numberTip seals 8 922.004.018
TIP GUARDS FOR REVERSIBLE TIPSDescription Fitting Tightening type Part number
Tip guards
11/16" - 16 UN3B (KREMLIN M250, W...)
Manual 922.562.000With wrench 922.552.000
7/8" - 14 UNF3B (G...)Manual 922.563.000
With wrench 922.553.000
● Allows for extremely rapid cleaning, without the need for any tool● Manually removable (or conventional key lock system) ; very easy to use, it is also completely
leak free● Tip can be set in three possible positions : spraying, unplugging or removing.
● Reversible Tips To determine the part number of a tip, use the number engraved on the tip to replace the crosses in following part number : 922.055.XXX.
REVERSIBLE TIPSOutput at 140 bar (l/mn)
Equivalent diameter (in mm)
Tip colorHandle
filter (MESH)
Angle 30° 40° 50° 60° 70° 90°Fan width
cm 15/20 20/25 25/30 30/35 35/40 45/50 - 18/20
0,280 0,23 grey red (200)
Number engraved on the tip
- - - 609 - -
0,454 0,28 red blue (150) 311(06.05)
411 (06.07) - - - -
0,643 0,33 orange blue (150) 313 413
(09.07)513
(09.09)613
(09.11) - -
0,870 0,38 yellow yellow (100) 315 415
(14.07) 515 615 - -
1,136 0,43 blue white (50) 317 (14.05)
417 (14.07)
517 (14.09)
617 (14.11) - -
1,360 0,48 green white (50) - 419 (20.07)
519 (20.09)
619 (20.11) -
1,741 0,53 black white (50) - 421 (20.07)
521 (20.09)
621 (20.11) - -
2,50 0,63 black white (50) - - 525 (30.09) - 725
(30.15)925
(30.19)
3,33 0,74 black white (50) - - 529 (45.09) - 729
(45.15)929
(45.21)
The part numbers in brackets give the codes for equivalent KREMLIN flat tips from a spraying distance of 30 cm
● Tip guards for flat tips
● Tip guards for reversible tips
Tip
gu
ard
s an
d t
ips
AIR
LE
SS
Tip
gu
ard
s an
d t
ips
AIR
LE
SS
25-28 Pistolets et accessoires 26 2625-28 Pistolets et accessoires 26 26 17/11/08 10:08:0617/11/08 10:08:06
27
● Flat tips Flat tips ensure high precision and performancePart number : 000 00 XX.XX (replace of the X by the number read on the table)
FLAT TIPS
Fluid output at 140 bar (l/mn)
Equivalent diameter (in
mm)
Tip Diaphragm
Filter in handle (MESH)
Angle 18° 30° 40° 50° 60° 67° 75° 82° 88° 94°
Width of fan
(cm)8 13 18 23 28 33 38 43 48 53
0,230 0,18/0,007 12 red (200)
Number engraved on the tip
03.03 03.05 03.07
0,310 0,23/0,009 12 red (200) 04.05 04.07 04.09 04.11
0,460 0,28/0,011 12 blue (150) 06.05 06.07 06.09 06.11 06.13 - - - -
0,630 0,33/0,013 15 blue (150) 09.05 09.07 09.09 09.11 09.13 09.15 - - -
1,010 0,41/0,016 18 blue (150) 14.03 14.05 14.07 14.09 14.11 14.13 14.15 14.17 -
1,500 0,50/0,020 20 yellow (100) 20.05 20.07 20.09 20.11 20.13 20.15 20.17 20.19 -
2,250 0,61/0,024 25 yellow (100) 30.07 30.09 30.11 30.13 30.15 30.17 30.19 -
3,340 0,73/0,029 33 white (50) 45.07 45.09 45.11 45.13 45.15 - 45.21
Using a diaphragm increases spraying fineness. Part number : 000.029.1xx (replace the crosses with the diaphragm number)
● Tips with adjustable fan
Tip
gu
ard
s an
d t
ips
AIR
LE
SS
Tip
gu
ard
s an
d t
ips
AIR
LE
SS
TIPS WITH ADJUSTABLE FAN
Size(mm)Equivalent size in flat tips
Tip with fixing screw (M250) P.N. Spare needle P.N.minimum maximum
28 006 020 100.000.620 000.000.62141 014 068 100.001.468 000.001.469
Tips with adjustable fan allow you to adjust fan width and output simultaneously by operating one control knob.
iiKREMLIN's adviceKREMLIN's adviceGood quality spraying depends on the condition of the tip. Regularly replacement of the tip ensures a consistent fan pattern.Any overuse of tips will result in an oval-shaped outlet forming, which creates two major problems : - Reduced width of fan, with fluid heavily concentrated in the centre- Higher fluid output.
25-28 Pistolets et accessoires 27 2725-28 Pistolets et accessoires 27 27 17/11/08 10:08:1117/11/08 10:08:11
28
UNPLUGGING NEEDLES FOR FLAT TIPS
DescriptionTip
Quantity Part numberSize (mm)
Unclogging needles0,6 - 0,9
12 000.094.000
0,9 000.094.002
GUN HANDLE FILTERS (10 UNITS)Description color Part number200 MESH (74μm) handle filter Red 129.480.210150 MESH (100μm) handle filter blue 129.480.216100 MESH (150 μm) handle filter Yellow 129.480.21550 MESH (300 μm) handle filter White 129.480.220
● Gun handle filters
● Unplugging needles for flat tips
● Extensions for AIRLESS handle and spray guns
A complete extension set consists of : 1 extension, 1 fitting, 1 tip and 1 tip guard.
You can use a junction fitting ref : 922.007.315 to fit : ● 900 mm (35in) and 1800 mm (70in) extensions end to end● 300 mm (12in) and 600 mm (24in) extensions on 900 mm or 1800 mm extensions● A base and a tip on a 900 mm or 1800 mm extension
EXTENSIONS FOR AIRLESS SPRAY GUNS AND HANDLESDescription Part numberExtension - Length : 300 mm 922.030.122Extension - Length : 600 mm 922.030.242Swivel fitting 922.075.062Straight fitting 922.024.302Reversible or flat tip guard
(1)
Reversible of flat tip
(1) See table
SEAL KITSDescription Quantity Use Part numberSeals (narrow) 10 Extensions for 300 and
600mm 922.055.410
Seals (large) 10 922.055.510Tip seals 8 Extensions for 900 and
1800mm 922.004.018
Extension seals 10 922.400.310
● Seals for extensions
SWIVEL FIITINGSDescription Thread Part number
Thread type (M250/M350)1/2 JIC (KREMLIN) 922.004.441
1/4 NPS (G) 922.004.421M 16 x 150 (W) 922.004.442
● Swivel fittings
Acc
esso
ries
Acc
esso
ries
25-28 Pistolets et accessoires 28 2825-28 Pistolets et accessoires 28 28 17/11/08 10:08:1217/11/08 10:08:12
29
AIR
LE
SS
In
ten
sive
AIR
LE
SS
In
ten
sive
TM
TM p
isto
n p
um
ps
pis
ton
pu
mp
s
SELECTION TABLE SELECTION TABLE INTENSIVEINTENSIVETMTM PUMPS PUMPS
Pump type IntensiveTM
Pump designation 40.25 40.25 WB 40.50 40.50 WB 53.60
Construction
Stainless steel ● ● ● ● ●
Configuration
Wall-mounted ● ● ● ●
Cart-mounted ● ● ● ● ●
Hot with circulation ● ❍
Dimensions (wall-mounted pump without filter or rod) Dimensions with cart
Height (mm) 800 920 800 920 1300
Width (mm) 400 400 400 400 735
Depth (mm) 280 280 280 280 826
Weight (kg) 22 22 22 22 90
Air motor/Fluid section
Air motor 1000-4 1000-4 2000-4 2000-4 5000
Stroke of air motor (mm) 100 100 100 100 120
Fluid section 25 25 50 50 60
Specifications
Pressure ratio 40/1 40/1 40/1 40/1 53/1
Output per cycle (cc) 50 50 100 100 124
Number of cycles (per litre) 20 20 10 10 8
Output at 30 cycles/mn (L) 1,5 1,5 3 3 3,7
Free output per minute (L) 3 3 6 6 7,4
Max. product pressure (bar) 240 240 240 240 318
Max. paint temperature (°C) 60°C 60°C 60°C 60°C 60°C
Operating air pressure (bar) 1-6 1-6 1-6 1-6 1-6
Max. air consumption at 30 cycles/mn under 4 bar (Nm3/h)(1) 21.6 21,6 43.2 43,2 71
● : Available ❍ : Optional
(1) Air consumption (Nm3/h) = (1,2 x (output at 20 or 30 cycles in l/mn) x (compression ratio) x (air motor pressure + 1 bar) x 60) / 1000
29-39 Pompes AIRLESS®_GB.indd 2929-39 Pompes AIRLESS®_GB.indd 29 1/12/08 12:08:461/12/08 12:08:46
30
KITS FOR AIRLESS 40.25 PUMPS WITH SWIVEL FITTING GUNS
Kit designation Gun type Heater Suction rod Atomization air regulator Hoses Length (m) Pump output filter Kit part
number40.25 wall-mounted
MVX 200, tête VX14 -
●● 7,5
●
151.260.894
40.25 wall mounted
M350, with 517 reversible tip - - 10 151.249.440
SEAL KITSDescription Part numberH25 GT seal kit 144.950.091H25 GT repair kit 144.950.096Seal kit for 1000-4 air motor 146.270.991Repair kit for 1000-4 air motor 146.270.995
ATOMIZATION AIR KIT WITH REGULATORDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE AIRLESS 40.25 PUMP -STAINLESS STEEL
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
-
●
- 151.775.100
Wall mounted ● ● 151.775.200
2 arms cart mounted ● ● 151.775.400
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M 1/4" NPS
Fluid Inlet M 26x125Fluid output (filter) M 1/2" JIC
SPECIFICATIONSPressure ratio 40/1Fluid volume per cycle (cm ) 50Number of cycles per litre of products 20Fluid Output at 30 cycles/mn (l/mn) 1,5Air consumption (m3/h) at 30 cycles/mn at 4 bar 21,6Free flow rate (L/mn) 3Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 240Maximum Fluid Temperature (°C) 60Sound level (dBA) 77Sealing Packings Upper sealing Polyfluid + PTFE G
Lower sealing GT sealWetted parts Stainless steelWeight (kg) - wall-mounted 22Height (cm) 80Width (cm) 40Depth (cm) 28
AIR
LE
SS
In
ten
sive
AIR
LE
SS
In
ten
sive
TM
TM p
isto
n p
um
ps
pis
ton
pu
mp
sAIRLESS 40.25 PUMP - STAINLESS STEELAIRLESS 40.25 PUMP - STAINLESS STEELIdeal for outputs up to 1.5 litre/mn
FEATURES BENEFITSLarge diameter suction rod and high compression ratio
Use with a large number of materials
All stainless steel construction Compatible with water-based productsSimple design, reduced number of spare parts
Easy maintenance
29-39 Pompes AIRLESS®_GB.indd 3029-39 Pompes AIRLESS®_GB.indd 30 1/12/08 12:08:481/12/08 12:08:48
31
SEAL KITSDescription Part numberH25 WB seal kit 144.950.991Repair kit H25 WB 144.950.992Seal kit for 1000-4 air motor 146.270.991Repair kit for 1000-4 air motor 146.270.995
ATOMIZATION AIR KIT WITH REGULATORDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE AIRLESS 40.25 WB PUMP -STAINLESS STEEL
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall mounted● ● ● ●
151.775.5502 arms cart mounted 151.775.500
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M 1/4" NPS
Fluid Inlet M 1''Fluid output (filter) M 1/2" JIC
SPECIFICATIONSPressure ratio 40/1Fluid volume per cycle (cm3) 50Number of cycles per litre of products 20Fluid Output at 30 cycles/mn (l/mn) 1,5Air consumption (m3/h) at 30 cycles/mn at 4 bar 21,6Free flow rate (L/mn) 3Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 240Maximum Fluid Temperature (°C) 60Sound level (dBA) 77Sealing Packings Upper sealing Polyfluid + PTFE G
Lower sealing GT sealWetted parts Stainless steelWeight (kg) - wall-mounted 22Height (cm) 92Width (cm) 40Depth (cm) 28
AIR
LE
SS
In
ten
sive
AIR
LE
SS
In
ten
sive
TM
TM p
isto
n p
um
ps
pis
ton
pu
mp
s
AIRLESS 40.25 WB PUMP AIRLESS 40.25 WB PUMP STAINLESS STEELSTAINLESS STEELRecommended for high viscosity products such as water-based and high solid paints. Ideal for outputs up to 1.5 litre/mn.
FEATURES BENEFITSLarge suction fluid passage For high viscosity materialsPuls-AbsorberTM device Stable and smooth flowAll stainless steel construction Compatible with water-based productsStainless steel strainer Long service life and good reliability
No crushing possibleSimple design, reduced number of spare parts
Easy maintenance
Kit designation Gun type Heater Suction rod Atomization air regulator Hoses Length (m) Filter pump
outlet Kit part number
40.25 WB MVX 200 - ● ● 7,5 ● 151.249.480
KITS FOR AIRLESS 40.25 WB PUMPS WITH SWIVEL FITTING MVX
29-39 Pompes AIRLESS®_GB.indd 3129-39 Pompes AIRLESS®_GB.indd 31 1/12/08 12:09:351/12/08 12:09:35
32
SEAL KITSDescription Part numberH50 GT seal kit 144.960.091H50 GT repair kit 144.960.096Seal kit for 2000-4 air motor 146.270.990Repair kit for 2000-4 air motor 146.270.996
ATOMIZATION AIR KIT WITH REGULATORDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE AIRLESS 40.50 PUMP - STAINLESS STEEL
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
-
●
- 151.785.100Wall mounted
● ●
151.785.200Two arms cart-mounted 151.785.400
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M 1/4" NPS
Fluid Inlet M 26 x 125Fluid output (filter) M 1/2" JIC
SPECIFICATIONSPressure ratio 40/1Fluid volume per cycle (cm ) 100Number of cycles per litre of products 10Fluid Output at 30 cycles/mn (l/mn) 3Free flow rate (L/mn) 6Air consumption (m3/h) at 30 cycles/mn at 4 bar 43,2Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 240Maximum Fluid Temperature (°C) 60Sound level (dBA) 80Sealing Packings Upper sealing Polyfluid + PTFE G
Lower sealing GT sealingWetted parts Stainless steelWeight (kg) - wall-mounted 22Height (cm) 80Width (cm) 40Depth (cm) 28
AIR
LE
SS
In
ten
sive
AIR
LE
SS
In
ten
sive
TM
TM p
isto
n p
um
ps
pis
ton
pu
mp
sAIRLESS PUMP 40.50 - STAINLESS STEELAIRLESS PUMP 40.50 - STAINLESS STEELIdeal for feeding two guns
FEATURES BENEFITSSimple design, reduced number of spare parts
Easy maintenance
Large diameter suction rod and high compression ratio
Use with a large number of materials
29-39 Pompes AIRLESS®_GB.indd 3229-39 Pompes AIRLESS®_GB.indd 32 1/12/08 12:09:371/12/08 12:09:37
33
SEAL KITSDescription Part numberH50 WB seal kit 144.960.891H50 WB repair kit 144.960.892Seal kit for 2000-4 air motor 146.270.990Repair kit for 2000-4 air motor 146.270.996
ATOMIZATION AIR KIT WITH REGULATORDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE AIRLESS 40.50 WB PUMP -STAINLESS STEEL
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall mounted● ● ● ●
151.785.5502 arms cart mounted 151.785.500
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M 1/4" NPS
Fluid Inlet M 1''Fluid output (filter) M 3/4" JIC
SPECIFICATIONSPressure ratio 40/1Fluid volume per cycle (cm3) 100Number of cycles per litre of products 10Fluid Output at 30 cycles/mn (l/mn) 3Air consumption (m3/h) at 30 cycles/mn at 4 bar 43.2Free flow rate (L/mn) 6Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 240Maximum Fluid Temperature (°C) 60Sound level (dBA) 80Sealing Packings Upper sealing Polyfluid + PTFE G
Lower sealing GT sealWetted parts Stainless steelWeight (kg) - wall-mounted 22Height (cm) 92Width (cm) 40Depth (cm) 28
AIR
LE
SS
In
ten
sive
AIR
LE
SS
In
ten
sive
TM
TM p
isto
n p
um
ps
pis
ton
pu
mp
s
AIRLESS 40.50 WB PUMP AIRLESS 40.50 WB PUMP STAINLESS STEELSTAINLESS STEEL
FEATURES BENEFITSLarge suction fluid passage For high viscosity materialsPuls-AbsorberTM device Stable and smooth flowAll stainless steel construction Compatible with water-based productsStainless steel strainer Long service life and good reliability
No crushing possibleSimple design, reduced number of spare parts
Easy maintenance
29-39 Pompes AIRLESS®_GB.indd 3329-39 Pompes AIRLESS®_GB.indd 33 1/12/08 14:22:061/12/08 14:22:06
34
KIT FOR AIRLESS 53.60 UNIT WITH SWIVEL FITTING GUNSSet-up Gun type Suction rod Hoses Length (m) Filter pump outlet Kit part number
Cart-mounted M350, with 517 reversible tip ● 16 ● 105.649.50.04
SEAL KITSDescription Part numberAlto 124cc Leather/PE seal kit 105.2475000 Motor's seal kit 105.2635000 Motor distributor seal kit 105.346
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Fluid Inlet M 26 x 125Fluid output (filter) M 3/4" JIC
AIR
LE
SS
In
ten
sive
AIR
LE
SS
In
ten
sive
TM
TM p
isto
n p
um
ps
pis
ton
pu
mp
sAIRLESS 53.60 UNITAIRLESS 53.60 UNITSTAINLESS STEELSTAINLESS STEELAIRLESS unit especially designed for industrial coating applications. Ideal for feeding two guns
FEATURES BENEFITSCart-mounted pump Can be used in most industrial areasRugged design Adapted for construction sitesAll stainless steel construction Compatible with water-based materialsSimple design, reduced number of spare parts
Easy maintenance
Large diameter suction rod and high compression ratio
Use with a large number of materials
SPECIFICATIONSPressure ratio 53/1Fluid volume per cycle (cm3) 124Number of cycles per litre of products 8Fluid Output at 30 cycles/mn (l/mn) 3.7Free flow rate (L/mn) 7.4Air consumption (m3/h) at 30 cycles/mn at 4 bar 71Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 318Maximum Fluid Temperature (°C) 60Sound level (dBA) 72Sealing Packings Upper sealing Leather/PE
Lower sealing Leather/PEWetted parts Stainless steelWeight (kg) 90Height (cm) 130Width (cm) 74Depth (cm) 83
29-39 Pompes AIRLESS®_GB.indd 3429-39 Pompes AIRLESS®_GB.indd 34 1/12/08 12:10:281/12/08 12:10:28
35
AIR
LE
SS
Flo
wm
axA
IRL
ES
S F
low
max
®® p
um
ps
pu
mp
s
SELECTION TABLE SELECTION TABLE FLOWMAXFLOWMAX®® PUMPS PUMPS
Pump type34. A2 40.25 F 40.50 F
Construction
Stainless steel ● ● ●
Configuration
Wall-mounted ● ● ●
Cart-mounted ● ● ●
Dimensions (wall-mounted pump without filter or rod)
Height (mm) 610 970 970
Width (mm) 410 400 400
Depth (mm) 250 280 280
Weight (kg) 27 37 42
Air motor/fluid section
Air motor 2000-2 1000-4 2000-4
Stroke of air motor (mm) 50 100 100
Fluid section 30 25 F 50 F
Characteristics
Pressure ratio 34/1 40/1 40/1
Output per cycle (cc) 60 50 100
Number of cycles (per litre) 16 20 10
Output at 30 cycles/mn 1,8 1,5 3
Free output per minute 3,6 3 6
Max. product pressure (bar) 200 240 240
Max. paint temperature (°C/F) 50 50 50
Operating air pressure (bar) 1-6 1-6 1-6
Max. air consumption (Nm3/h / cfm)(1) 22 21.6 43.2
● : Available ❍ : Optional
(1) Air consumption (Nm3/h) = (1,2 x (output at 20 or 30 cycles in l/mn) x (compression ratio) x (air motor pressure + 1 bar) x 60) / 1000
29-39 Pompes AIRLESS®_GB.indd 3529-39 Pompes AIRLESS®_GB.indd 35 1/12/08 12:10:291/12/08 12:10:29
36
AIR
LE
SS
Flo
wm
axA
IRL
ES
S F
low
max
®® p
um
ps
pu
mp
s
SEAL KITSDescription Part numberSeal kit for A2 fluid section 144.910.799Repair kit for A2 fluid section 144.910.797Seal kit for external valves 144.910.798Seal kit for 2000-2 air motor 144.929.902Repair kit for 2000-2 air motor 144.929.912
ATOMIZATION AIR KIT WITH REGULATORDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE FLOWMAX® 34.A2 PUMP
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall-mounted Flowmax® 34.A2 ● ● ● ● 151.740.700
1 arm cart Flowmax® 34.A2 ● ● ● ● 151.740.750
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M 1/4" NPS
Fluid Inlet M 26 x 125Fluid output (filter) M 1/2 JIC
SPECIFICATIONSPressure ratio 34/1Fluid volume per cycle (cm3) 60Number of cycles per litre of products 16Fluid Output at 30 cycles/mn (l/mn) 1,8Air consumption (m3/h) at 30 cycles/mn at 4 bar 22Free flow rate (L/mn) 3,6Maximum air inlet pressure (bar) 6Maximum fluid pressure (bar) 200Maximum Fluid Temperature (°C) 50Sound level (dBA) 71Sealing packing Bellows Polyethylene
Upper and lower GT PolyethyleneWetted parts Stainless steelWeight (kg) - wall-mounted 26.5Height (cm) 61Width (cm) 41Depth (cm) 25
FLOWMAX® 34.A2 PUMPFLOWMAX® 34.A2 PUMPUnique design with external valves for an easy maintenance. Flowmax® technology ensures total sealing. Quick inver-sion of this pump allows for a perfectly stable fan shape at the gun.Performance, extended lifetime, reliability.
FEATURES BENEFITSExternal valves assemby Easy maintenanceFloating piston Fast inversions and very high efficiencySealing done by one bellow High reliability
No more lubricant cupsNo fluid leakagesTotal sealing between pump and its environment, ideal to work with isocyanates catalystsIdeal for UV and pre-catalyzed materials
Large and smooth fluid passages Fluid discharge without retention of a wide range of coating materials
All stainless steel construction Compatible with water-based materialsBalanced fluid section Constant fluid output pressure
Kit designation Gun type Suction rod Atomization air regulator Hoses Length (m) Pump output filter Kit part number
Wall-mounted Flowmax® 34.A2 M250 ● - 10 ● 151.260.870
Wall-mounted Flowmax® 34.A2
MVX 200, VX14 aircap ● ● 7,5 ● 151.260.897
KITS FOR FLOWMAX® 34.A2 PUMPS WITH SWIVEL FITTING GUNS
29-39 Pompes AIRLESS®_GB.indd 3629-39 Pompes AIRLESS®_GB.indd 36 1/12/08 12:10:291/12/08 12:10:29
37
SEAL KITSDescription Kit part numberSeal kit H25F 144.950.291Repair kit H25F 144.950.292Seal kit for 1000-4 air motor 146.270.991Repair kit for 1000-4 air motor 146.270.995
ATOMIZATION AIR KITDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE FLOWMAX® 40.25F PUMP - STAINLESS STEEL
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall mounted
●
●
●
● 151.776.200
Wall mounted - - 151.776.100
Cart mounted ● ● 151.776.400
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M1/4" NPS
Fluid Inlet M 26 x 125Fluid Outlet M 1/2" JIC
SPECIFICATIONSPressure ratio 40/1Fluid volume per cycle (cm3) 50Number of cycles per litre of products 20Air consumption (m3/h) at 30 cycles/mn at 4 bar 21,6Fluid Output at 30 cycles/mn (l/mn) 1,5Free flow rate (L/mn) 3Maximum fluid pressure (bar) 240Maximum Fluid Temperature (°C) 50Maximum air inlet pressure (bar) 6Sound level (dBA) 72Sealing packing Bellows Polyethylene
Upper and lower GT polyethyleneWetted parts stainless steelWeight (kg) - wall-mounted 37Height (cm) 97Width (cm) 40Depth (cm) 28
FLOWMAX® 40.25F PUMP FLOWMAX® 40.25F PUMP STAINLESS STEELSTAINLESS STEELNew generation Flowmax® pump for low volume applications
FEATURES BENEFITSSealing done by one large stroke bellow High reliability
No more lubricant cupsNo fluid leakagesTotal sealing - ideal for isocyanatesIdeal for UV and pre-catalyzed materials
Ergonomic design of fluid passages Fluid discharge without retention of a wide range of coating materials
All stainless steel construction Compatible with water-based materialsBalanced fluid section Constant fluid output pressureMobile piston seal Excellent suction capacity
AIR
LE
SS
Flo
wm
axA
IRL
ES
S F
low
max
®® p
um
ps
pu
mp
s
Kit designation Gun type Suction rod Atomization air regulator
Hoses Length (m) Pump output filter Part number
40.25F Wall-mounted MVX 200, VX14 aircap ● ● 7,5 ● 151.260.898
40.25F Wall-mounted M350 ● - 10 - 151.249.460
PUMP KITS FOR FLOWMAX® 40.25F WITH SWIVEL FITTING GUNS
29-39 Pompes AIRLESS®_GB.indd 3729-39 Pompes AIRLESS®_GB.indd 37 1/12/08 12:10:321/12/08 12:10:32
38
SEALS KITSDescription Part numberSeal kit H 50F 144.960.291Repair kit H 50F 144.960.292Seal kit for 2000-4 air motor 146.270.990Repair kit for 2000-4 air motor 146.270.996
ATOMIZATION AIR KITDescription Part numberAtomization air kit with regulator (for MVX200 spray guns) 151.740.200
CONFIGURATION OF THE FLOWMAX® 40.50F PUMPS- STAINLESS STEEL
Set-up Suction rod Drain rod Fluid pressure air regulator Pump output filter Part number
Wall-mounted
●
●
●
● 151.786.200
Wall-mounted - - 151.786.100Cart-mounted (on a 2-arms cart) ● ● 151.786.400
FITTINGSFitting Air inlet (valve) F 3/4" BSP
Air outlet (option atomization air kit)
M 1/4" NPS
Fluid Inlet M 26x125Fluid Outlet M 1/2" JIC
SPECIFICATIONSPressure ratio 40/1Fluid volume per cycle (cm3) 100Number of cycles per litre of products 10Fluid Output at 30 cycles/mn (l/mn) 3Air consumption (m3/h) at 30 cycles/mn at 4 bar 43,2Free flow rate (L/mn) 6Maximum fluid pressure (bar) 240Maximum Fluid Temperature (°C) 50Maximum air inlet pressure (bar) 6Sound level (dBA) 77Sealing packing Bellows Polyethylene
Upper and lower GT PolyethyleneWetted parts Stainless steelWeight (kg) - wall-mounted 42Height (cm) 97Width (cm) 40Depth (cm) 28
AIR
LE
SS
Flo
wm
axA
IRL
ES
S F
low
max
®® p
um
ps
pu
mp
sFLOWMAXFLOWMAX®® 40.50F PUMP 40.50F PUMP STAINLESS STEELSTAINLESS STEELNew generation Flowmax® pump, ideal for feeding two guns
FEATURES BENEFITSSealing done by one large stroke bellow High reliability
No more lubricant cupsNo fluid leakagesTotal sealing between pump and its environment, ideal to work with isocyanates catalystsIdeal for UV and pre-catalyzed materials
Ergonomic design of fluid passages Fluid discharge without retention of a wide range of coating materials
All stainless steel construction Compatible with water-based materialsBalanced fluid section Constant fluid output pressureMobile piston seal Excellent suction capacity
29-39 Pompes AIRLESS®_GB.indd 3829-39 Pompes AIRLESS®_GB.indd 38 1/12/08 12:10:391/12/08 12:10:39
39
Rec
om
men
dat
ion
s an
d A
dvi
ces
Rec
om
men
dat
ion
s an
d A
dvi
cesFor wall-mounted configurations
Description Part numberSingle Post Cart 051.730.110Two post cart w/o plate 051.221.0002 reinforced arms 051.231.000Two post pump mounting plate 056.100.199
● Carts
RECOMMENDATIONS FOR AIRMIX® PUMPS FILTRATION
PumpStrainer
Pump filter Gun filter Tip filter Tip sizeØ suction tube filtration
10.1420.15
16,525 300 microns Optional
4Micro screen
02 - 03 - 046 06
12 O' ring seal 9 - 12 - 14
20.25 / 20.50 / 20.25F/20.50F/17.A2
25 1000 microns
4 4Micro screen
02 - 03 - 046 6 068 12
'O' ring seal09 - 12
12 12 14
● Recommendations for AIRMIX® filtrationTo avoid any tip unplugging, it is necessary to opte for filtration by stages.
AREAS OF COMPETENCE OF THE FLOWMAX® PUMPSINTENSIVETM pumps FLOWMAX® pump
Frequent color changes ● -
2K materials (manual or booster pump) ● -
Pre-catalyzed materials - ●
Circulating/circulation - ●
High volume applications - ●
Charged materials - ●
Max. product temperature 60°C 50°C
● Recommendations to optimize your FLOWMAX® applications
GUN HANDLE FILTERS (M250/M350)Handle gun filter (Mesh)
Reversible tipscode
150 11150 13100 1550 1750 1950 2150 2550 29
RECOMMENDATIONS FOR AIRLESS PUMPS FILTRATIONPump Mesh (for hose Ø) Pump filter40.25, 40.25F, 40.50, 40.50F, 34A2, 53.60 25 6-840.25 WB, 40.50 WB (screwed stainless steel strainer) 30 12
● Recommendations for AIRLESS filtrationTo avoid any tip unplugging, it is necessary to opt for filtration by stages.
29-39 Pompes AIRLESS®_GB.indd 3929-39 Pompes AIRLESS®_GB.indd 39 1/12/08 12:10:431/12/08 12:10:43
40
HP HEATER - STAINLESS STEEL VERSIONStainless steel heater
Volatge / PowerTemperature (°C) Cable length w/o
plug (m)Fitting
Part numberVolt Watt Inlet Outlet
HP60230 1500
15 - 9010 m
M 1/2 JIC M 1/2 JIC 056.140.700 BP60 M 18×125 M 18 x 125 056.140.100 HP61 115 1500
5 mM 1/2 JIC M 1/2 JIC 056.140.750
HP60 400 1250 M 1/2 JIC M 1/2 JIC 056.140.770
SPECIFICATIONSThermostat type By fluid expansion and dry contactThermal fuse Cut-out at 121°CThermometer Graduation 0 - 100°CTemperature range (°C) 15 - 90Pressure (bar) 250Weight (kg) 23Wetted parts Body and fittings in stainless steelRoom temperature (°C) 40 maxi
Hea
ters
Hea
ters
HP - BP 60/61 HEATERSHP - BP 60/61 HEATERS
FEATURES BENEFITSA thermometer is integrated into the command box
No pressure loss when working with high viscosity materials
Modular design Easy maintenance
iiKREMLIN's adviceKREMLIN's adviceIf you want to set your heater on your cart mount pump assembly, please select a two arm cart.
This version of the equipment is to be used only for water-based materials
Their original design ensures an optimized heat transfer, with no risk of burning the paint in the heater.This equipment will allow you to reduce the viscosity of paints without using solvents.It guarantees an outstanding finish quality, whatever the ambient temperature may be.
40-44 Pulve risation a chaud_GB40 4040-44 Pulve risation a chaud_GB40 40 17/11/08 10:24:3217/11/08 10:24:32
41
AD HEATERS - STAINLESS STEEL VERSIONSStainless steel heater
Volatge / PowerTemperature (°C) Cable length w/o
plug (m)Fitting
Part numberVolt Watt Inlet Outlet
AD60 230 150015 - 80
10 M 1/2 JIC M 1/2 JIC 056.146.000 AD61 115 1500 5 M 1/2 JIC M 1/2 JIC 056.146.050 AD60 400 1250 5 M 1/2 JIC M 1/2 JIC 056.146.070
AD HEATERS - ALUMINUM VERSION (SOLVENT BASE MATERIALS)
Aluminum heaterVolatge / Power
Temperature (°C) Cable length w/o plug (m)
FittingPart number
Volt Watt Inlet OutletAD60 230 1500 15 - 80 10 M 1/2 JIC M 1/2 JIC 056.126.000 AD61 115 1500 15 - 80 5 M 1/2 JIC M 1/2 JIC 056.126.050
SPECIFICATIONSThermostat type By fluid extension and dry contactThermal fuse Cut at 121°CThermometer Graduation 0 - 100°C
Temperature range (°C) 15 - 80Pressure (bar) 240 maxiWeight (kg) Aluminum : 15.5
Stainless steel : 25Wetted parts Aluminum : aluminum body, galvanized
chrome fittingsStainless steel : stainless steel body
and fittings
Hea
ters
Hea
ters
AD 60/61 HEATERS : NON-EXPLOSIVEAD 60/61 HEATERS : NON-EXPLOSIVEOriginal design ensuring optimum heat transfer with no risk of burning the paint in the heater.
FEATURES BENEFITSAvailable in stainless steel version Compatible with water-based
materialsA thermometer is integrated into the command box
No pressure loss when working with high viscosity materials
Modular design Easy maintenance
ii If you want to set your heater on your cart mount pump assembly, please select a two arm cart.
KREMLIN's adviceKREMLIN's advice
To be used in zone 1 and 2 according to ATEX.
Agreement INERIS 03ATEX 0079XEx II 2 G - EEx d II AT3
40-44 Pulve risation a chaud_GB41 4140-44 Pulve risation a chaud_GB41 41 1/12/08 12:13:211/12/08 12:13:21
42
ONE PASS HEATER PART NUMBERS - STAINLESS STEEL VERSIONSStainless steel One-pass heater
Volatge / PowerTemperature (°C) Cable length w/o
plug (m)Fitting
Part numberVolt Watt Inlet Outlet
One-pass 230V 230 1400 15-45 5 M 1/2 JIC M 1/2 JIC 056.152.110 One-pass 115V 115 1400 15-45 5 M 1/2 JIC M 1/2 JIC 056.151.110
SPECIFICATIONSThermostat type By fluid expansion and dry contactThermal fuse Cut at 72°CThermometer Graduation 0 - 60°CTemperature range (°C) 15 - 45Pressure (bar) 120Weight (kg) 16,5Wetted parts Stainless steel and PTFERoom temperature (°C) 40° maxi
Hea
ters
Hea
ters
ONE-PASS HEATERONE-PASS HEATERThe economical and reliable solution for a constant spraying quality to reduce the viscosity of paints without adding solvents.The heating of the product is done in one single passage in the One-passTM heater thanks to the new design and the optimized thermal exchange efficiency.This innovative design offers the possibility to install directly the One-pass heater directly between the pump and the gun without recirculation. Its dimensions and reduced weight allow to fit it on a mobile pump (2 arms cart and mounting plate)
FEATURES BENEFITSStandard stainless steel version Compatible with water-based
materialsA thermometer is integrated into the command box
No pressure loss when working with high viscosity materials
Reduced dimensions Mounting on mobile versionsModular design Quick and easy maintenancet max : 20°C at an ouput of 800 cc/mn
Optimised performances in most applications
iiKREMLIN's adviceKREMLIN's adviceIf you want to set your heater on your cart mount pump assembly, please select a two arm cart
To be used in zone 1 and 2 according to ATEX
Agreement ISSeP 05ATEX031Ex II 2 G - Ex d IIA T3
40-44 Pulve risation a chaud_GB42 4240-44 Pulve risation a chaud_GB42 42 17/11/08 10:24:4017/11/08 10:24:40
43
Y-FITTING PART NUMBERSDescription Fittings on gun Hoses thread Part numberStainless steel Y-fitting - for airspray guns F 3/8" NPS M 1/4" NPS 129.029.915
Stainless steel Y-fitting - for AIRMIX® guns F 1/2" JIC M 1/2" JIC 029.520.500
Acc
esso
ries
fo
r h
ot
circ
ula
tio
nA
cces
sori
es f
or
ho
t ci
rcu
lati
on
● Y- fitting - stainless steelAllowing paint circulation on the gun while maintaining ease of use. Remote set-up possible using an additional hose.
AIRMIX® BACK PRESSURE REGULATOR PART NUMBERS
VersionThread
Back fitting Flushing valve
Flushing rod M 18 x 125 Part number
Pump intake RodWall-mounted F 26 x 125 M 26 x 125 M 1/2 JIC ● ● 051.314.030
CIRCULATION VALVES PART NUMBERSThread
Back fitting Flushing valve Flushing rod M 18 x 125 Part number
Pump intake RodF 26 x 125 M 26 x 125 M 1/2 JIC ● ● 051.314.010
M 1"G M 35 x 150 M 3/4 JIC ● ● 051.341.100
● Circulation valve (for all types of spraying)
Allows you to set the perfect output for circulation.Max. fluid pressure : 240 bar.
● AIRMIX® back pressure regulatorAssures a constant pressure in the fluid circuit.Regulation pressure : 0 - 70 bar.
40-44 Pulve risation a chaud_GB43 4340-44 Pulve risation a chaud_GB43 43 17/11/08 10:25:0617/11/08 10:25:06
44
No
tes
No
tes
40-44 Pulve risation a chaud_GB44 4440-44 Pulve risation a chaud_GB44 44 17/11/08 10:25:1417/11/08 10:25:14
Kremlin Rexson reserves the right to modify its equipment and/or specifications without notice.Kremlin, Airmix®, Regulex®, Flowmax® are registered trademarks.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,mechanical, photocopying, recording or otherwise, without the prior permission of KREMLIN REXSON.
ATEX Directive ( Explosive Atmosphere)
ATEX 94/9/CE Directive : European (EU) regulation for the use of electrical and non-electrical equipment which may be used in explosive atmospheres, including pumping and spraying equipment in potentially explosive atmospheres.
From 1 July 2003, it will be necessary for all products placed on the market or put into use to comply with the ATEX Directive, even if they are only intended for use in their country of origin.All user will have to be compliant with the Directive since 30 June 2006 for existing equipment (ATEX 99/92 CE).
Compliant KREMLIN equipment are in Group II, category 2G (equipment designed to ensure a high level of protection). They can be used in zone 1 and 2 without any restriction.
Nota : Group II – Category 2: equipment designed to ensure a high level of protectionG : gas and vapourZone 1 : potential hazard (spray booth, preparation area)Zone 2 : minimal hazard
Impr
essi
on :
TA
L In
dust
ries
- 1
17-1
19, q
uai
de V
alm
y -
7501
0 PA
RIS
III de couv_GB G2.indd IIIIII de couv_GB G2.indd III 9/01/09 9:56:079/01/09 9:56:07
AAt your servicet your service
KREMLIN REXSON - B.P.39 - 150 avenue de Stalingrad - 93245 Stains cedex - FranceTél. +33 (0)1 49 40 25 25 - Fax. +33 (0)1 48 26 07 16
1008
573
.576
.002
- K
RE
MLI
N R
EX
SO
N s
aves
righ
t to
chan
ge w
ithou
t not
ice
char
acte
ristic
s an
d se
rvic
es o
ffere
d as
wel
l as
equi
pmen
t and
atta
chm
ents
of t
hese
.
A worldwide network
Training centres all over the world : Paris, Detroit, Barcelona, Düsseldorf, Shanghaï, Mumbay, Sao Paulo...
Making Manufacturers More CompetitiveMaking Manufacturers More Competitive™™
Visit our websiteVisit our websitewww.kremlin-rexson.comwww.kremlin-rexson.com
G2 couverture et pages didactiqu10 10G2 couverture et pages didactiqu10 10 01/12/2008 11:52:1201/12/2008 11:52:12