galvanised steel wire on coil - van merksteijn international · technical data sheet galvanised...

1
Wire is our business p 1 Technical data sheet Galvanised steel wire on Coil, May 2015 version 5 1. Product description This technical datasheet specifies properties for galvanized steel wire on coil. The coils are mainly used for the production of fencing panels. 2. Normative references - EN ISO 16120-2:2011-10: Non-alloy steel wire rod for conversion to wire. - EN 10218-2: Steel wire and wire products - General Part 2: wire dimensions and tolerances. - EN 10244-2: Steel wire and wire products – non-ferrous metallic coatings on steel wire, Part 2: zinc or zinc-alloy coatings. 3. Technical specifications 3.1 Mechanical and Chemical Properties Diameter (mm) Diameter Tolerance (mm) Ovality (max./mm) Tensile strength (MPa) Min. Elongation min. Agt (%) Material Galvanizing 99,995% zinc (EN 10244-2, Class D) Helix (max./mm) 3,40 ± 0,05 0,10 750-900 1,0 C7D-Si ≥ 40 gr/m 2 300 3,60 ± 0,06 0,10 750-900 1,0 C7D-Si ≥ 40 gr/m 2 300 3,75 ± 0,06 0,10 750-900 1,0 C7D-Si ≥ 40 gr/m 2 300 4,00 ± 0,06 0,10 700-850 1,0 C7D-Si ≥ 40 gr/m 2 300 4,30 ± 0,06 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m 2 300 4,50 ± 0,06 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m 2 300 4,65 ± 0,07 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m 2 300 5,00 ± 0,07 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m 2 300 5,45 ± 0,07 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m 2 300 5,55 ± 0,07 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m 2 300 6,30 ± 0,07 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m 2 300 7,45 ± 0,08 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m 2 300 7,55 ± 0,08 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m 2 300 8,30 ± 0,08 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m 2 300 3.2 Coil dimensions 4. Packaging forms D : 800 - 1100 mm The coil is tied by 4 galvanized steel straps 32x0,8 mm. d : 580 - 620 mm Packaging options for an additional charge: h : 600 or 750 mm Lifting eyes (not certified). L : Unwinding left Packaging wood, pallet. Weight : 1000 - 2600 kg 3.3 Helix 5. Inspection document Maximum helix of 300 mm. Inspection document 3.1 - EN 10204 on request. Galvanised steel wire on Coil C Si Mn P S Cu Cr Ni Mo CEV Min. 0,04 0,14 - - - - - - - - Max. 0,10 0,23 0,70 0,040 0,040 0,40 0,15 0,15 0,08 0,50 Technical Datasheet Fences

Upload: others

Post on 19-Jan-2020

35 views

Category:

Documents


3 download

TRANSCRIPT

Wire is our business

p 1Technical data sheet Galvanised steel wire on Coil, May 2015 version 5

1. Product description This technical datasheet specifies properties for galvanized steel wire on coil.

The coils are mainly used for the production of fencing panels.

2. Normative references - EN ISO 16120-2:2011-10: Non-alloy steel wire rod for conversion to wire. - EN 10218-2: Steel wire and wire products - General Part 2: wire dimensions and tolerances. - EN 10244-2: Steel wire and wire products – non-ferrous metallic coatings on steel wire, Part 2: zinc or zinc-alloy coatings.

3. Technical specifications 3.1 Mechanical and Chemical Properties

Dia

met

er(m

m)

Dia

met

erTo

lera

nce

(m

m)

Ova

lity

(max

./m

m)

Ten

sile

str

eng

th(M

Pa)

Min

. Elo

ng

atio

nm

in. A

gt

(%)

Mat

eria

l

Gal

van

izin

g99

,995

% z

inc

(EN

102

44-2

, C

lass

D)

Hel

ix

(max

./m

m)

3,40 ± 0,05 0,10 750-900 1,0 C7D-Si ≥ 40 gr/m2 300

3,60 ± 0,06 0,10 750-900 1,0 C7D-Si ≥ 40 gr/m2 300

3,75 ± 0,06 0,10 750-900 1,0 C7D-Si ≥ 40 gr/m2 300

4,00 ± 0,06 0,10 700-850 1,0 C7D-Si ≥ 40 gr/m2 300

4,30 ± 0,06 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m2 300

4,50 ± 0,06 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m2 300

4,65 ± 0,07 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m2 300

5,00 ± 0,07 0,10 600-800 1,5 C7D-Si ≥ 40 gr/m2 300

5,45 ± 0,07 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m2 300

5,55 ± 0,07 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m2 300

6,30 ± 0,07 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m2 300

7,45 ± 0,08 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m2 300

7,55 ± 0,08 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m2 300

8,30 ± 0,08 0,10 550-750 1,5 C7D-Si ≥ 40 gr/m2 300

3.2 Coil dimensions 4. Packaging forms D : 800 - 1100 mm The coil is tied by 4 galvanized steel straps 32x0,8 mm. d : 580 - 620 mm Packaging options for an additional charge: h : 600 or 750 mm • Lifting eyes (not certified). L : Unwinding left • Packaging wood, pallet. Weight : 1000 - 2600 kg

3.3 Helix 5. Inspection document Maximum helix of 300 mm. Inspection document 3.1 - EN 10204 on request.

Galvanised steel wire on Coil

C Si Mn P S Cu Cr Ni Mo CEV

Min. 0,04 0,14 - - - - - - - -

Max. 0,10 0,23 0,70 0,040 0,040 0,40 0,15 0,15 0,08 0,50

Technical DatasheetFences