GANTRY TRUCK AND CAR WASH MACHINE

CAMBUS

NET 2

ONE

Cambus

Cambus

Stainless steel electrical

board box

New electrical board

Standard configuration

Inverter on gantry movement

FULL configuration

Inverter on:

Gantry movement

Right vertical brush movement

Left vertical brush movement

Up/down horizontal brush

Updated programs setting•Selection of the water to be used during the wash cycle

•Selection of the vehicle type to be washed

•Selection of the functions to activate or deactivate during the wash cycle

Exemple•Deactivation detection of the pedestrian mirror wash program

•Deactivation brushing on the rear part of the vehicle

•Deactivate horizontal brush on the front of the vehicle

• Wash cycle managementUpdate of the personalization of the different functions settings

Update of management of the winter discharge and set-up

• Activation of the washing speed increase on the sides of the vehicleWhen a threshold valuechanges, the control resets automatically in standard

configuration.

Manual controls to simplify the setting/ regulation operations and

maintenance.

• Password personalized by the user

• Registration of the alarms.

To interact with the gantry in a DYNAMIC and INTUITIVE way.

Operator board Touch screen

Cambus

Cambus

Wi-Fi connection

Connection, on the car wash machine site, by the use a Wi-

Fi router

It is possible to visualise with proper license, on

smartphone or tablet with operating system (android/ios2),

the operator panel of the machine

.All the controls and functions on the XBT operator panel

are active on smartphone and tablets.

Cambus

Configuration of

water collector

with CHEMICAL

PREWASH option

Configuration

STANDARD water

collector

STANDARDProducts pneumatic

dosing pumps

OPTION

Products electrical

dosing pumps

Cambus

Direct towing

TANKER

On this equipment we have applied the same features as the equipment model CAMBUS

NET 2

“ NET 2 ”

“ FLY 2 “

With new SW and HW

configuration

NET 2

Stinless steel AISI 304 outfitting for

the version :

“ NET 2 ”

“ FLY 2 “

•Components of the machine in stainless steel for a maximum durability along the time out

Internal parts of the

construction

Equipment basis

Vertical brushes

Movement beam

Trolley plates and components

Top drying

Top blower

Plates of support

InverterTowing

Up/down

CONTOUR drying

PLC M340CAN – Open technology

1 st Gantry

Drying / High pressure

2 nd Gantry

Washing

InverterTowing

Up/down Horizontal brush

Right vertical brush movement

Left veritical brish movement

PLC M340CAN – Open technology

NEW CONFIGURATION

ELECTRICAL BOARD

NET 2

1 st GantryLeft upper part

NET 2

2 nd GantryLeft upper part

Water system

High Pressure

A

E3

E4

S-D

M2

MF

AL

2B

2R

2R

2Sa

2Sb

NET 2Ethernet Connection

Remote connection by secomea modem

The data modem sends the following information:

•Equipment during discharge

•Equipment in block

•Equipment restarted

•Temperature

By email sending, possibility to configure up to 5 email

addresses through the XBT).

It is possible to visualise, with the proper license, the

equipment operator panel on smartphone or tablet with

operating system (android/ios2).

It is NOT possible to make from remotely the following

controls:

•Restart

•Reset

•Start of washing cycle

When this connection is active those controls are disabled

both on the operator panel and on the connected device.

MODEM Operator panel

Tablet

Wi-Fi connection

Connection, on the car wash machine site, by the use a Wi-

Fi router

It is possible to visualise with proper license, on

smartphone or tablet with operating system (android/ios2),

the operator panel of the machine

.All the controls and functions on the XBT operator panel

are active on smartphone and tablets.

NET 2

NET 2

CONTOUR top high pressure

MOTORIZED TILTING

DISCOVER

Proper piston pump

of 7,5 kW

MOTORIZED OSCILLATING

SIDE high pressure

• DOUBLE piston oump (7.5 kW + 7.5 kW 60 liter/min 60 bar)

A pump feeds in one passage:

• CONTOUR top high pressure, positioned on the top dryer blower with

front/back tilting system

in a second passage

• SIDE high pressure

•The second pump feeds the DISCOVER system

HIGH PRESSURE

Management with:

• single piston pump 15 kW 100 liter/mint80 bar

Supply of side and top high pressure in TWO gantry

separated passages

“ POWER HP ”CONTOUR top high pressure

With percussion nozzels

CONTOUR top chemical prewash arch

NET 2

ONE

ONE

ONEComponenents in stainless steel

Front door

Side cladding

towing

Support in

stainless steelNEW FIXING

Beam and trolley plates

vertical brushes

CONTOUR

Blower dryer

SIDE dryer

blower

Wheel

washer

support

ONESIDE DRYER UPDATE

The side dryer blowers are no longer anchored directly on the side upper part of the gantry in a fix position

but by the use of spacers, in order to allow the passage of the air during the aspiration and to position its

to a variable height according to the washing height.

Direct fixing on

equipment side upper

part

Fixing through spacers

ONE

Solenoid valve group

Regulators of

Dosing pumps

Right side partPLC M340

Ethernet connectionLeft side part

PLC EXPANSION

In external board

Ethernet connection

ONE

Contour dryer

ONESIDE HIGH PRESSURE

Piston pump for

high pressure50 let/min - 50 bar - 5.5kW

Inside the gantry(Right side of the gantry)

Side high pressure

Integrated in the

wheelwasher

Side High pressure

ONE

Loading dimensions H. 28

For the loading, if the machine will

be loaded with a space required of

3080 mm, the machine will be

shipped all assembled with the

upper part included

For the loading, if the machine will be loaded with

a space required of 2580 mm, you must dismantle,

beside the horizontal brush guides and the top

dryer, also the side dryer blowers

Horizontal brush guide

Top dryer guide

Side dryer blowers

Loading dimensions H. 25

For the loading, if the machine will

be loaded with a space required of

2850 mm, the machine will be

shipped all assembled with the

upper part included

For the loading, if the machine will be loaded with

a space required of 2580 mm, you must dismantle,

beside the horizontal brush guides and the top

dryer, also the side dryer blowers

Horizontal brush guide

Top dryer guide

Side dryer blowers

ONE

ONE

Loading dimensions H. 23

For the loading, if the machine will

be loaded with a space required of

3100 mm, the machine will be

shipped all assembled with the

upper part included

For the loading, if the machine will

be loaded with a space required of

2580 mm, the machine will be

shipped all assembled with the

upper part included