garlock one-up® pump diaphragm catalog · 2019-04-01 · variables such as but not limited to;...

Leaders in Sealing Integrity

ONE-UP® DiaphragmsDiaphragm Catalog

http://www.garlock.com/en/product/one-up?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=title&utm_campaign=std

http://www.garlock.com/?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=logo&utm_campaign=std

http://www.garlock.com/en/product/one-up?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=pic&utm_campaign=std


Table of Contents

Garlock ONE-UP® Diaphragms

INTRODUCTION ..............................................................................................................................................................1

ABEL ................................................................................................................................................................................2

ALMATEC ........................................................................................................................................................................3

ARO .................................................................................................................................................................................4

AshTON ..........................................................................................................................................................................5

BLAGDON .......................................................................................................................................................................6

DELLMECO .....................................................................................................................................................................7

DEPA ...............................................................................................................................................................................8

FLOTRONIC .....................................................................................................................................................................9

FLUX ..............................................................................................................................................................................10

GRACO ..........................................................................................................................................................................11

TAPFLO .........................................................................................................................................................................12

VERsAMATIC ................................................................................................................................................................13

VERDER .........................................................................................................................................................................14

WARREN RUPP .............................................................................................................................................................15

WILDEN .........................................................................................................................................................................19

YAMADA .......................................................................................................................................................................20

Due to the unique dynamics of actuated pumps, Garlock cannot specify temperature limits for actual diaphragms. In a diaphragm pump and valve, there are variables such as but not limited to; diaphragm geometry, displacement, and pump speed that greatly affect the diaphragm performance. Experienced pump and valve manufactures have confirmed that pumps and valves used in low and/or elevated service temperatures (40°F to 200°F) should be re-rated with respect to speed and pressure.

CIP & sIP Capable: Maximum 300°F (149°C)Meets specification (GYLON): FDA Regulation 21CFR177.1550,3A standard, NsF 61 standard, UsP Class VI Chapter 87 & 88, UsP Part 31, 281 and 661Meets specification (EPDM): FDA Regulation 21CFR177.2600Neoprene backed ONE-UP diaphragms conform to EC Directive 94/9/EC, when installed in an ATEX compliant pump

http://www.garlock.com/en/product/one-up?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=family&utm_campaign=std

http://www.garlock.com/?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=footer&utm_campaign=std



NOTES:• PA”XXXX”isforGarlock“IndustrialONE-UP”• GY”XXXX”isforGYLON“FDAONE-UP”

ONE-UP® DiaphragmsGARLOCK® ONE-UP® DiAPhRAms

GARLOCK® ONE-UP® Pump Diaphragms are durable and versatile. Containing high performance PTFE GORE® sheet on the wetted side, they last significantly longer than other conventional PTFE diaphragms.

GYLON® ONE-UP® DiAPhRAGms

Made using our exclusive GYLON® PTFE Diaphragm material and a proprietary EPDM rubber backing, this product is made with the same patented rib construction of our standard industrial ONE-UP®.

32˚F (0˚C) 350˚F (176˚C)

14˚F (-10˚C) 280˚F (137˚C)

14˚F (-10˚C) 200˚F (93˚C)

40˚F (5˚C) 300˚F (149˚C)

0 10 20 30 40 50 60 70 80 90 100

32%

32%

55%

100%

24%

OPERAtiNG tEmPERAtURE RANGE

GENERAL ChEmiCAL REsistANCE

1

WARNiNG:Properties/applications shown throughout this brochure are typical. Your specific application should not be undertaken without independent study and evaluation for suitability. For specific application recommendations consult Garlock. Failure to select the proper sealing products could result in property damage and/or serious personal injury. Performance data published in this brochure has been developed from field testing, customer field reports and/or in-house testing. While the utmost care has been used in compiling this brochure, we assume no responsibility for errors. specifications subject to change without notice. This edition cancels all previous issues. subject to change without notice.

http://www.garlock.com/en/product/one-up?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=pic&utm_campaign=std


http://www.garlock.com/en/product/garlock-one-up-pump?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=style&utm_campaign=std

http://www.garlock.com/en/product/garlock-one-up-pump?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=style&utm_campaign=std

http://www.garlock.com/en/product/gylon-one-up-pump?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=style&utm_campaign=std

http://www.garlock.com/en/product/gylon-one-up-pump?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=style&utm_campaign=std




ABEL

2

DiAPhRAGm DEsiGN

» Designs vary from a flat one piece diaphragm, molded or two piece diaphragms


Cm (Compact membrane)metal

NEOPRENE Backed EPDm Backed VitON Backed Abrasive Resistant (Neoprene)

TBD Call Garlock Call Garlock Call Garlock Call Garlock

Em (Electromechanical membrane) NEOPRENE Backed EPDm Backed VitON Backed Abrasive Resistant (Neoprene)

EM015 Call Garlock Call Garlock Call Garlock Call Garlock









hm (hydraulic Piston membrane)metal

NEOPRENE Backed EPDm Backed VitON Backed Abrasive Resistant (Neoprene)

HMS Call Garlock Call Garlock Call Garlock Call Garlock

HMD Call Garlock Call Garlock Call Garlock Call Garlock

hmt/hmQ (hydraulic membrane) NEOPRENE Backed EPDm Backed VitON Backed Abrasive Resistant (Neoprene)

HMT Call Garlock Call Garlock Call Garlock Call Garlock

Other Pumps NEOPRENE Backed EPDm Backed VitON Backed Abrasive Resistant (Neoprene)

Viking Type M PA0020 Call Garlock PA0303 Call Garlock

ONE-UP® Diaphragm Part Numbers

model NEOPRENE Part # OUtLEt OUtER DiAmEtER

BOLt CiRCLE DiAmEtER # BOLt hOLEs DiAmEtER

BOLt hOLEs

Viking Type M PA0020 TBD 9.53” (242 mm) N/A N/A N/A

Dimensions




PA0109

3


ALMATECDiAPhRAGm DEsiGN

» Imbedded piston plate, female threads, except for PA0110, which has a threaded male stud

» Flange/bolt sealing design

iNtERChANGEABiLitY

» Tapflo, Verder

CONVERsiON Kits

» Not required



BOLt hOLEs

AD 10 PA0110 .375” (9.5 mm) 3.91” (99 mm) 3.55” (90 mm) 4 .20” (5.1 mm)

AD 15 PA0109 .5” (12.7 mm) 5.66” (144 mm) 5.22” (133 mm) 6 .24” (6.1 mm)

AD 25 PA0101 1” (25 mm) 7.47” (190 mm) 6.94” (176 mm) 6 .33” (8.4 mm)

AD 40 PA0097 1.5” (38 mm) 10.19” (259 mm) 9.53” (242 mm) 8 .32” (8.1 mm)

AD 50 PA0025 2” (51 mm) 13.28” (337 mm) 12.56” (319 mm) 8 .42” (10.7 mm)

Dimensions

model NEOPRENE Backed EPDm Backed

VitONBacked

Abrasive Resistant (Neoprene)

A10, AD10, CX20, F10, E10UE10T, ET15, CX20E

PA0110 PA0147 / GY0147 PA0009 Call Garlock

A15, AD15, AD20, CX50, F20,B20BN, E15E, E15T, CX50E, AD20, ET25

PA0109 PA0148 / GY0148 PA0008 Call Garlock

A25, AD25, AD32, CX130, E25 PA0101 PA0149 / GY0149 PA0107 Call Garlock

A40, AD40, AD50 (NEW VERSION), E40T, E40E, E40U, ET50

PA0097 PA0150 / GY0150 PA0108 PA0151

A50, AD50, (OLD VERSION), E50U, E50T, E50E PA0025 PA0127 / GY0127 PA0117 PA0025


GY0147 GY0149

PartnumbersbeginninginGYareFDAcompliant




ARO

4


DiAPhRAGm DEsiGN

» Flange/bolt sealing designs, at times incorporating both flange/ bolt and bead sealing designs in the same diaphragm; see photos (PA0072 & PA0096)

iNtERChANGEABiLitY

» Binks (Gemini II pumps) & PA0084 - Warren Rupp 1” outlet pump

CONVERsiON Kits

» Not required

model NEOPRENE Part # OUtLEt OUtER

DiAmEtERBOLt CiRCLE DiAmEtER # BOLt hOLEs DiAmEtER

BOLt hOLEs

66605X-XXX PA0096 .5” (12.7 mm) 6.00” (152 mm) 5.00” (127 mm) 8 .34” (8.6 mm)

6661AX-XXX-C 6661BX-XXX-C 66610X-XXX-C 66611X-XXX-C 66612X-XXX-C 66613X-XXX-C

PA0084 1” (25 mm) 7.75” (197 mm) 7.00” (178 mm) 8 .34” (8.6 mm)

6661TX-XXX-C 6661UX-XXX-C66615X-XXX-C 66616X-XXX-C 66617X-XXX-C 66618X-XXX-C

PA0098 1.5” (38 mm) 11.56” (294 mm) 10.50” (267 mm) 10 .41” (10.4 mm)

6662XX-XXX-C PA0098 2” (51 mm) 11.56” (294 mm) 10.50” (267 mm) 10 .41” (10.4 mm)

PD20 or PF20 PA0072 2” (51 mm)11.86”X11.86”X4”

OCTAGON12.00” (305 mm) 8 .43” (10.9 mm)

PD30 PA0118 3” (76.2 mm)14.90”X14.90”X4”

OCTAGON15.13” (384 mm) 8 .58” (14.7 mm)

Dimensions


VitONBacked


PD02P, PX01X Call Garlock Call Garlock Call Garlock Call Garlock

66605X-XXX, PD05P, PD05X, PM05 PA0096 PA0153 PA0065 Call Garlock

6661AX-XXX-C6661BX-XXX-C66610X-XXX-C 66611X-XXX-C66612X-XXX-C 66613X-XXX-C

PA0084 PA0154 PA0035 PA0084

6661TX-XXX-C 6661UX-XXX-C66615X-XXX-C 66616X-XXX-C66617X-XXX-C 66618X-XXX-C

PA0098 PA0156 PA0066 PA0157

6662XX-XXX-C (non-metallic) PA0098 PA0156 PA0066 PA0157

PD20, PF20, PF20R, PM20R, PM20 PA0072 PA0142 PA0143 PA0144

PD30, PH30F, PM30R, PM30 PA0118 PA0158 PA0119 PA0118


PA0072 PA0096 PA0098




ASHTON


DiAPhRAGm DEsiGN

» Beaded

iNtERChANGEABiLitY

» Blagdon & some Graco pumps

CONVERsiON Kits

» Not required


DiAmEtERsEALiNG DEsiGN

DiAmEtER OF CENtER hOLE

RW10, AT10 PA0122 .375" (9 mm) 4.26" (108 mm) BEAD .25" (6.4 mm)

AT15, RW15 PA0029 .5" (12 mm) 5.03" (128 mm) BEAD .25" (6.4 mm)

RW25 PA0030 1" (25 mm) 6.65" (169 mm) BEAD .44" (11.2 mm)

RW40, AT40 PA0023 1.5" (38 mm) 8.85" (225 mm) BEAD .5" (12.7 mm)

RW50, AT50 PA0073 2" (50 mm) 10.88" (276 mm) BEAD .5" (12.7 mm)

Dimensions


VitONBacked


RW10, AT10 PA0122 PA0170 PA0171 Call Garlock

AT15, RW15 PA0029 PA0172 PA0010 PA0146

RW25 PA0030 PA0173 PA0011 PA0174

RW40, AT40 PA0023 PA0175 PA0176 PA0177

RW50, AT50 PA0073 PA0178 PA0012 PA0073


5




BLAGDON


DiAPhRAGm DEsiGN

» Flange/bolt sealing designs, at times incorporating both flange/ bolt and bead sealing designs in the same diaphragm; see photos

iNtERChANGEABiLitY

» Graco, older models, husky 1030 & 2140

CONVERsiON Kits

» Not required



BOLt hOLEs

Beaver 25, Plastic Pump PA0018 1” (25 mm) 9.00” (229 mm) 8.2” (208 mm) 8 .38” (9.7 mm)

Beaver 25, Metal Pump PA0021 1” (25 mm) 8.88” (226 mm) 8.2” (208 mm) 8 .38” (9.7 mm)

Beaver 50 PA0007 2” (51 mm) 12.40” (315 mm) 11.66” (296 mm) 12 .45” (11.4 mm)

Dimensions

model / Outlet NEOPRENE Backed EPDm Backed

VitONBacked


Beaver 25, B25.05.PT.BB.XXX-X, B25.05.AA.W3.XXX / 1” Plastic Pumps

PA0018 PA0159 PA0022 PA0160

Beaver 25, B25.05.XA.XB.XXS, X25.05.XA.XB.XXS / 1” Metal Pumps

PA0021 PA0161 PA0028 PA0162

Beaver 50, B50.05.PX.XB.XXX-X, X50.05.XX.XB.XXX-XX All Models

PA0007 PA0163 PA0019 PA0164


PA0021 PA0007

6




DELLMECO


DiAPhRAGm DEsiGN

» Integral Piston Diaphragms with bolt holes

iNtERChANGEABiLitY

» Almatec, Verder & Tapflo

CONVERsiON Kits

» Not required



BOLt hOLEs

DM10 PA0110 .375" (9.5 mm) 3.91” (99 mm) 3.55” (90 mm) 4 .20” (5.1 mm)

DM15 PA0109 .5" (12.7 mm) 5.66” (144 mm) 5.22” (133 mm) 6 .24” (6.1 mm)

DM20 PA0109 .5" (12.7 mm) 5.66” (144 mm) 5.22” (133 mm) 6 .24” (6.1 mm)

DM25 PA0101 1" (25 mm) 7.47” (190 mm) 6.94” (176 mm) 6 .33” (8.4 mm)

DM40 PA0097 1.5" (38 mm) 10.19” (259 mm) 9.53” (242 mm) 8 .32” (8.1 mm)

DM50 PA0025 2" (51 mm) 13.28” (337 mm) 12.56” (319 mm) 8 .42” (10.7 mm)

Dimensions


VitONBacked


DM10 PA0110 PA0147 / GY0147 PA0009 Call Garlock



DM25 PA0101 PA0149 / GY0149 PA0107 PA0157

DM40 PA0097 PA0150 / GY0150 PA0108 PA0151

DM50 PA0025 PA0127 / GY0127 PA0117 PA0152


7




DEPA


DiAPhRAGm DEsiGN

» Outer sealing bead design

iNtERChANGEABiLitY

» LKM

CONVERsiON Kits

» DL25 through DL80 require conversion kits. No conversion kit required for DL15 series.


DiAmEtER

iNNER BOLt CiRCLE

DiAmEtER

CENtER BOLt hOLEs

DiAmEtER BOLt hOLEs

DL-15 PA0049 .5” (12.7 mm) 5.09” (129 mm) N/A N/A N/A

DL-25 PA0050 1” (25 mm) 7.03” (179 mm) N/A N/A N/A

DL-40 PA0051 1.5” (38 mm) 8.64” (219 mm) N/A N/A N/A

DL-50 PA0052 2” (51 mm) 11.40” (290 mm) 5.10” (130 mm) 6 .63” (16 mm)

DL-80 PA0053 3” (76 mm) 14.49” (368 mm) 6.9” (175 mm) 6 1.02” (26 mm)

Dimensions

model / Outlet NEOPRENE Backed

EPDm Backed

VitONBacked


DL-15 METALLIC & NON-METALLIC / 1/2" PA0049 PA0141 PA0080 Call Garlock

DL-25 METALLIC & NON-METALLIC / 1” PA0050 PA0086 PA0057 PA0165

DL-40 METALLIC & NON-METALLIC / 1-1/2” PA0051 PA0121 / GY0121 PA0067 PA0166

DL-50 METALLIC & NON-METALLIC / 2" PA0052 PA0040 PA0068 PA0140

DL-80 METALLIC & NON-METALLIC / 3” PA0053 PA0167 PA0099 PA0053


PA0049

8



Leaders in Sealing Integrity9


FLOTRONIC (FPL)DiAPhRAGm DEsiGN


» Embedded threaded insert

iNtERChANGEABiLitY

» No interchangeability

CONVERsiON Kits

» Not required


DiAmEtER

iNsERt iNtERNAL DiAmEtER

iNtERNAL thREAD

300, 500, 710, 900 Series PA0082 1” (25 mm) - 1.5” (38 mm) - 2” 9.563” (243 mm) 1.4” (36 mm) M-39 X 2mm

300, 500, 710, 900 Modified PA0256 1” (25 mm) - 1.5” (38 mm) - 2” (51 mm) 9.563” (243 mm) 1.6” (41 mm) M-22 X 2mm

300, 500, 710, 900 HI-FLO PA0258 2” (51 mm) - 3” (76.2 mm) 14.7” (373 mm) 2.2” (56 mm) 2.25 – 14UNS

Dimensions


EPDm Backed

VitONBacked


300, 500, 710, 900Series 1” through 2”

PA0082 PA0169 Call Garlock PA0138

300, 500, 710, 900Modified 1” through 2”

PA0256 Call Garlock Call Garlock Call Garlock

300, 500, 710, 900HI-FLO 2” through 3”

PA0258 Call Garlock Call Garlock Call Garlock


PA0258 PA0169




10


FLUXDiAPhRAGm DEsiGN


» Embedded threaded insert

iNtERChANGEABiLitY

» No interchangeability

CONVERsiON Kits

» Not required


DiAmEtERBOLt CiRCLE DiAmEtER

NO. BOLt hOLEs

DiAmEtER BOLt hOLEs

FDM 12 PA0096 .5" (12.7 mm) 6.00" (152 mm) 5.00" (127 mm) 8 .34" (8.64 mm)

FDM 25 PA0084 1" (25 mm) 7.75" (197 mm) 7.00" (178 mm) 8 .34" (8.64 mm)

FDM 40 PA0098 1.5" (38 mm) 11.56" (293.62 mm) 10.50" (267 mm) 10 .41" (10.41 mm)

RFM 10 / RFML 10 TBD TBD TBD TBD TBD TBD



RFM 40 TBD TBD TBD TBD TBD TBD

RFM 50 TBD TBD TBD TBD TBD TBD

Dimensions

model NEOPRENE Backed

EPDm Backed

VitONBacked


FDM 12 PA0096 Call Garlock PA0065 Call Garlock

FDM 25 PA0084 PA0154 PA0035 Call Garlock

FDM 40 PA0098 PA0156 PA0066 PA0157

RFM 10 / RFML 10 Call Garlock Call Garlock Call Garlock Call Garlock



RFM 40 Call Garlock Call Garlock Call Garlock Call Garlock

RFM 50 Call Garlock Call Garlock Call Garlock Call Garlock





11


GRACODiAPhRAGm DEsiGN

» Outer sealing bead design, new models. Older models incorporate a flange/bolt and or combination of flange/bolt and bead sealing designs.

iNtERChANGEABiLitY

» Ashton Pumps (United Kingdom), BLAGDON - Older model Graco pumps, husky 1030 & 2140

CONVERsiON Kits

» Not required



NO BOLt hOLEs

DiAmEtER BOLt hOLEs

Husky 205 NA .25” (6.4 mm) NA NA NA NA

Husky 307 PA0122 .375” (9.5 mm) 4.3” (109 mm) NA NA NA

Husky 715 PA0029 .75” (19.1mm) 5.0” (127 mm) N/A N/A N/A

Husky 1030 PA0021 1” (25 mm) 8.9” (226 mm) 8.2” (208 mm) 8 .38” (9.7 mm)

Husky 1040 PA0030 1” (25 mm) 6.7” (170 mm) N/A N/A N/A

Husky 1590 PA0023 1.5” (38 mm) 8.9” (226 mm) N/A N/A N/A

Husky 2140 PA0007 2” (51 mm) 12.4” (315 mm) 11.7” (297 mm) 12 .45” (11.4 mm)

Husky 2150 PA0073 2” (51 mm) 10.9” (277 mm) N/A N/A N/A

Husky 3275 N/A 3” (76 mm) N/A N/A N/A N/A

Dimensions

model Code model / Outlet NEOPRENE Backed

EPDm Backed

VitONBacked


N/A Husky 205 / 1/4” Call Garlock Call Garlock Call Garlock Call Garlock

D3XXX Husky 307 / 3/8” PA0122 PA0170 PA0171 Call Garlock

24107 Husky 715, 716 & 515 / 3/4” PA0029 PA0172 PA0010 PA0146

N/A 1030 / 1” OLD PA0021 PA0161 PA0028 PA0162

N/A Husky 1030 / 1” PA0030 PA0173 PA0011 PA0174

N/A 1030HP “NEW” PA0296 Call Garlock Call Garlock Call Garlock

FX1XXX Husky 1040 & 1040 DOUBLE) / 1” PA0030 PA0173 PA0011 PA0174

FX2XXX, 1590SXXXX Husky 1590 / 1-1/2” PA0023 PA0175 PA0176 PA0177

N/A Husky 2140 / 2” PA0073 PA0178 PA0012 PA0179

DF3DXXXX, DF4DXXXX, DX2DXXXX, DX2DXXXX,

FX3XXXXHusky 2150 (METALLIC & NON-METALLIC) / 2” PA0073 PA0178 PA0012 PA0073

3300X-XXXXXX, 3150SXXXXX

Husky 3275 / 3” Call Garlock Call Garlock Call Garlock Call Garlock




Leaders in Sealing Integrity12


TAPFLODiAPhRAGm DEsiGN

» Integral Piston Diaphragms with bolt holes

iNtERChANGEABiLitY

» Almatec, Verder & Tapflo

CONVERsiON Kits

» Not required



NO BOLt hOLEs

DiAmEtER BOLt hOLEs

TR9 Call Garlock 1/4" (6.4mm) TBD TBD 4 TBD

T20, TR20 PA0110 .375" (9.5 mm) 3.91” (99 mm) 3.55” (90 mm) 4 .20” (5.1 mm)

T25 PA0110 .375" (9.5 mm) 3.91” (99 mm) 3.55” (90 mm) 4 .20” (5.1 mm)

T50 PA0109 .5" (12.7 mm) 5.66” (144 mm) 5.22” (133 mm) 6 .24” (6.1 mm)

T70 PA0109 .5" (12.7 mm) 5.66” (144 mm) 5.22” (133 mm) 6 .24” (6.1 mm)

T100, T120 PA0101 1" (25 mm) 7.47” (190 mm) 6.94” (176 mm) 6 .33” (8.4 mm)

T200, T220 PA0097 1.5" (38 mm) 10.19” (259 mm) 9.53” (242 mm) 8 .32” (8.1 mm)

T400, T420 PA0025 2" (51mm) 13.28” (337 mm) 12.56” (319 mm) 8 .42” (10.7 mm)

T800, T820 Call Garlock 3" (76.2mm) TBD TBD 8 TBD

Dimensions

ONE-UP® Diaphragm Part Numbersmodel NEOPRENE

BackedEPDm

BackedVitONBacked


T20, TR20 PA0110 PA0147 / GY0147 PA0009 Call Garlock

T25 PA0110 PA0147 / GY0147 PA0009 Call Garlock



T100, T120 PA0101 PA0149 / GY0149 PA0107 PA0157

T200, T220 PA0097 PA0150 / GY0150 PA0108 PA0151

T400, T420 PA0025 PA0127 / GY0127 PA0117 PA0025




13


VERSAMATICDiAPhRAGm DEsiGN

» Outer sealing bead design, new models. Older models incorporate a flange/bolt and or combination of flange/bolt and bead sealing designs.

iNtERChANGEABiLitY

» Wilden, Dominator, Lutz, storck, Tecnomatic, sureflow, Teledyne, sprague And serflico

CONVERsiON Kits

» Not required



BOLt CiRCLE DiAmEtER

CENtER BOLt hOLEs

DiAmEtER BOLt hOLEs

V5 PA0081 .5” (12.7 mm) 4.9” (124 mm) BEAD N/A N/A N/A

E5 (New Pump) TBD .5” (12.7 mm) TBD FLANGE/BOLT TBD TBD TBD

E1, E1P, E1K V1, V1P, V1K, P1

PA0095 1” (25 mm) 8.1” (206 mm) FLANGE/BOLT 7.0” (178 mm) 8 .34” (8.6 mm)

E4, V4 PA0078 1.25” (32 mm) 8.6” (219 mm) BEAD N/A N/A N/A

E4P, E4K (New Pump)

TBD 1.25” (32 mm) 8.6” (219 mm) FLANGE/BOLT TBD TBD TBD

E2, V2, U2 PA0075 2” (51 mm) 11.4” (290 mm) BEAD N/A N/A N/A

E2P, E2K, P2 PA0042 2” (51 mm) 12.0” (305 mm) FLANGE/BOLT 11.0” (279 mm) 10 .34” (8.6 mm)

E2 HP PA0052W 2” (51 mm) 11.4” (290 mm) BEAD N/A N/A N/A

E3, V3 PA0087 3” (76 mm) 14.4” (366 mm) BEAD N/A N/A N/A

Dimensions


EPDm Backed

VitONBacked


V5, PVM, KVM, TVM, SVM, HVM, VM / .5” PA0081 PA0199 / GY0199 PA0031 PA0235

E5 /.5” (New Pump) Call Garlock Call Garlock Call Garlock Call Garlock

E1,E1P, E1K, V1, V1P, V1K, P1, PVM, KVM / 1” PA0095 PA0183 / GY0183 PA0039 PA0139

E4,V4 / 1.25” PA0078 PA0045 / GY0045 PA0083 PA0014

E4P, E4K / 1-1/2” (New Pump) Call Garlock Call Garlock Call Garlock Call Garlock

E2, V2, V2FV, U2 / 2” PA0075 PA0044 / GY0044 PA0094 PA0015

E2P, E2K, P2 / 2” PA0042 PA0184 / GY0184 PA0043 PA0042

E2 HP PA0315 Call Garlock Call Garlock Call Garlock

E3,V3 / 3” PA0087 PA0091 / GY0091 PA0033 PA0046


PA0042





VERDERDiAPhRAGm DEsiGN

» Beaded, integrated piston design and bolted designs used.

iNtERChANGEABiLitY

» Almatec, Tapflo, Dellmeco, Warren Rupp

CONVERsiON Kits

» Conversion kits needed for some models, no kit needed for Pur series pumps




BOLt hOLEs

VA10 PA0122 .375" (9.5 mm) 4.26" (108 mm) Bead NA NA NA

VA15 PA0029 .5" (12.7 mm) 5.03" (128 mm) Bead NA NA NA

VA20 PA0029 .75" (19.1mm) 5.03" (128 mm) Bead NA NA NA

VA25 PA0030 1" (25 mm) 6.65" (169 mm) Bead NA NA NA

VA40 PA0023 1.5" (38 mm) 8.85" (225 mm) Bead NA NA NA

VA50 PA0073 2" (51 mm) 10.88" (276 mm) Bead NA NA NA

VA-P10, VDP-D 10 PA0110 .375" (9.5 mm) 3.91” (99 mm) FLANGE/BOLT 3.55” (90 mm) 4 .20” (5.1 mm)

VA-P15, VDP-D 15 PA0109 .5" (12.7 mm) 5.66” (144 mm) FLANGE/BOLT 5.22” (133 mm) 6 .24” (6.1 mm)

VDP-D 20 PA0109 .75" (19.1mm) 5.66” (144 mm) FLANGE/BOLT 5.22” (133 mm) 6 .24” (6.1 mm)

VA-P25, VDP-D 25 PA0101 1" (25 mm) 7.47” (190 mm) FLANGE/BOLT 6.94” (176 mm) 6 .33” (8.4 mm)

VDP-D 32 PA0101 1.25" (31.8 mm) 7.47” (190 mm) FLANGE/BOLT 6.94” (176 mm) 6 .33” (8.4 mm)

VA-P40, VDP-D 40 PA0097 1.5" (38 mm) 9.53” (242 mm) FLANGE/BOLT 9.53” (242 mm) 8 .32” (8.1 mm)

VA-P50, VDP-D 50 PA0025 2" (51 mm) 12.56” (319 mm) FLANGE/BOLT 12.56” (319 mm) 8 .42” (10.7 mm)

Dimensions

VA seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked


VA8 Call Garlock Call Garlock Call Garlock Call Garlock

VA10 PA0122 PA0170 PA0171 Call Garlock

VA15 & VA20 PA0029 PA0172 PA0010 PA0146

VA25 PA0030 PA0173 PA0011 PA0174

VA40 PA0023 PA0175 PA0176 PA0177

VA50 PA0073 PA0178 PA0012 PA0173

Pure seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked


VA-P08 Call Garlock Call Garlock Call Garlock Call Garlock

VA-P10, VDP-D 10 PA0110 PA0147 / GY0147 PA0009 Call Garlock


VDP-D 20 PA0109 PA0148 / GY0148 PA0008 Call Garlock


VDP-D 32 PA0101 PA0149 / GY0149 PA0107 Call Garlock

VA-P40, VDP-D 40 PA0097 PA0150 / GY0150 PA0108 PA0151

VA-P50, VDP-D 50 PA0025 PA0127 / GY0127 PA0117 PA0152

14





WARREN RUPPDiAPhRAGm DEsiGN

» Warren Rupp/ sandpiper brand has the largest selection of pumps and pump parts. The majority of the diaphragms are flange bolt-sealing design, but they also have bead designs, including 100% PTFE diaphragms without elastomer backings.

iNtERChANGEABiLitY

» Marathon, Crane Deming, Crown, Gold, Bo Kwang, QBY, Chourong, sludgepiper, Aro, Verder, Flux and Big Pumps.

CONVERsiON Kits

» sB3 and sB4 are the only two pumps in the entire product line which require conversion kits.




CENtER BOLt hOLEs

DiAmEtER BOLt hOLEs

EB1/2-A, EB1/2-TPB1/2A, PB3/4A,

DA1/2, DA3/4PA0088 .5” (12.7 mm) 4.7” (119 mm) BEAD N/A N/A N/A

SE 1/2-A , SB1-A, SB25-A, EB1SM, EB1A, EB1M, EB1- 1/2SM, EB1-1/2A,

SA1A, SA25-A, ET1A, ET1M, ET1- 1/2SM, ST1A, ST25- A, SSB1A,

DSB1, SET1A, TA1, TD1- 1/2


PB1A PA0089 1” (25 mm) 8.0” (203 mm) BEAD N/A N/A N/A

SB1-1/2-A, SB1-1/2- H, SB40-A, PB1- 1/2A, PB2A, SB1- 1/2H, TA2

PA0090 1.5” (38 mm) 9.9” (251 mm) BEAD N/A N/A N/A

SB2-A, EB2A, EB2SA, EB2SM, EB2M, EB2MB, MEB2M, EB3SM, EB3SA, EB50-M, SA2A, EA2A,

MSA2- A, MSA2B, ET2M, ET3SM


EB3M, EB4M, EB80- M, SA3M, SA4M, ET3M, TA3


SB3-A, SB4-A PA0048 3” (76 mm) 15.5” (394 mm) FLANGE/BOLT 14.6” (371 mm) 12 .75” (19.1 mm)

ST1A, ST25-APA0084 / PA0103*

1” (25 mm) 10.4” (264 mm) FLANGE/BOLT 9.5” (241 mm) 8 .31” (7.9 mm)

ST1-1/2A, ST40A PA0129 / PA0104* 1.5” (38 mm) 13.3” (338 mm) FLANGE/BOLT 13.3” (338 mm) 12 .47” (11.9 mm)

ET1-1/2A, ET1- 1/2M, SSB2A, ST1- 1/2A, ST40A, SET2M, SET2A

PA0129 / PA0132*1.5” (38 mm)

&2” (51 mm)

9.75” (248 mm) BEAD N/A N/A N/A

EH2M, EH2A, SH2M, SH2M, SH2A PA0130 2” (51 mm) 9.75” (248 mm) FLANGE/BOLT N/A N/A N/A

ET1A, ET1M, SET1A PA0131 1” (25 mm) 7.8” (198 mm) FLANGE/BOLT 7.0” (178 mm) 8 .34” (8.6 mm)

ET1-1/2A, ET1- 1/2M, SET2M PA0132 1.5” (38 mm) 11.3” (287 mm) FLANGE/BOLT 10.5” (267 mm) 8 .5” (12.7 mm)

ET1-1/2SM PA0133 1.5” (38 mm) 7.8” (198 mm) FLANGE/BOLT 7.0” (178 mm) 8 .34” (8.6 mm)

ET2M , ET3SM, PA0134 2” (51 mm) 11.3” (287 mm) FLANGE/BOLT 10.5” (267 mm) 8 .5” (12.7 mm)

ET3M PA0047 / PA0135* 3” (76 mm) 15.5” (394 mm) FLANGE/BOLT 14.6” (371 mm) 8 .75” (19.1 mm)

Dimensions

15





WARREN RUPPs seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked


100% PtFE (No Rubber)

SE 1/2-A PA0084 PA0154 PA0035 PA0084 N/A

SB1-A, SB25-A PA0084 PA0154 PA0035 PA0084 N/A

SB1-1/2-A, SB1-1/2-H, SB40-A PA0090 PA0136 PA0037 PA0137 N/A

SB2-A PA0085 PA0191 PA0038 PA0054 N/A

SB3-A, SB4-A (12 Bolt Hole) PA0048 PA0196 PA0056 PA0048 N/A

E seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



E02 Call Garlock Call Garlock Call Garlock Call Garlock N/A

EB1/2-A, EB1/2-T PA0088 Call Garlock PA0034 Call Garlock N/A

EB1SM, EB1A, EB1M, EB1-1/2SM EB1-1/2A

PA0084 PA0154 PA0035 PA0084 N/A

EB2A, EB2SA, EB2SM, EB2M, EB2MB, MEB2M, EB3SM, EB3SA, EB50-M

PA0085 PA0191 PA0038 PA0054 N/A

EB3M, EB4M, EB80-M (8 Bolt Hole)

PA0047 PA0194 PA0055 PA0047 N/A

P seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



PB1/4A Call Garlock Call Garlock Call Garlock Call Garlock N/A

PB1/2A, PB3/4A PA0088 Call Garlock PA0034 Call Garlock N/A

PB1A PA0089 PA0189 PA0036 PA0190 N/A

PB1-1/2A, PB2A PA0090 PA0136 PA0037 PA0137 N/A

s & E Flap Valve series

model

NEOPRENE Backed

EPDm Backed

VitONBacked



SA1A, SA25-A PA0084 PA0154 PA0035 PA0084 N/A

SA2A, EA2A, MSA2-A, MSA2-B

PA0085 PA0191 PA0038 PA0054 N/A

SA3A, SA4A Call Garlock Call Garlock Call Garlock Call Garlock N/A

SA3M, SA4M PA0047 PA0194 PA0055 PA0047 N/A

Phoenix seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



EH2M, EH2A, SH2M, SH2M, SH2A

PA0130 Call Garlock Call Garlock Call Garlock N/A

hydraulic seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



SB1-1/2H PA0090 PA0136 PA0037 PA0137 N/A

16





WARREN RUPP ViP series

model(4 Diaphragms required)

NEOPRENE Backed

EPDm Backed

VitONBacked



ET1A, ET1M PA0084 & * PA0154 & * PA0035 & * PA0084 & * * PA0131

ET1-1/2A PA0129 & * Call Garlock Call Garlock Call Garlock * PA0132

ET1-1/2M PA0129 & * Call Garlock Call Garlock Call Garlock * PA0132

ET1-1/2SM PA0084 & PA0133 PA0154 & PA0186 PA0035 & PA0187 PA0084 & PA0188 N/A

ET2M PA0085 & PA0134 PA0191 & PA0128 PA0038 & PA0192 PA0054 & PA0193 N/A

ET3SM PA0085 & PA0134 PA0191 & PA0128 PA0038 & PA0192 PA0054 & PA0193 N/A

ET3M PA0047 & PA0135 PA0194 & Call Garlock PA0055 & Call Garlock PA0195 & Call Garlock N/A

ST1A, ST25-A PA0084 & * PA0154 & * PA0035 & * PA0084 & * * PA0103

ST1-1/2A, ST40-A PA0129 & * Call Garlock Call Garlock Call Garlock * PA0104

New s series Plasticmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



PB1/4 Call Garlock Call Garlock Call Garlock Call Garlock N/A

E02 N/A N/A N/A N/A N/A

S05 N/A N/A N/A N/A N/A

S07, S07T, S10 N/A N/A N/A N/A N/A

S1F PA0084 PA0154 PA0035 PA0084 N/A

S15 Call Garlock Call Garlock Call Garlock Call Garlock N/A

S20 Call Garlock Call Garlock Call Garlock Call Garlock N/A

S30 PA0309 Call Garlock Call Garlock Call Garlock N/A

New s series metallicmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



E02 N/A N/A N/A N/A N/A

S05 N/A N/A N/A N/A N/A

S1F PA0084 PA0154 PA0035 PA0084 N/A

S15 PA0283 PA0284 PA0285 Call Garlock N/A

S20 PA0085 PA0191 PA0038 PA0054 N/A

S30 PA0047 PA0194 PA0055 PA0047 N/A

UsDA seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



SSB1A PA0084 PA0154 PA0035 PA0084 N/A

DSB1 PA0084 PA0154 PA0035 PA0084 N/A

SSA2A Call Garlock Call Garlock Call Garlock Call Garlock N/A

SSB2A PA0129 Call Garlock Call Garlock Call Garlock N/A

SET1A (4 diaphragms) PA0084 & * PA0154 PA0035 Call Garlock * PA0131 Outer Diaphragm

SET2M, SET2A (4 diaphragms) PA0129 & * PA0227 PA0226 Call Garlock * PA0132 outer Diaphragm

17

A“*”fortheVIP&USDAseriespumpsdenotestheoptiontohavea100%PTFEdiaphragmsuchastheoneshownabove(PA0103).





WARREN RUPP Waste Water series model

NEOPRENE Backed

EPDm Backed

VitONBacked



W09 Call Garlock Call Garlock Call Garlock Call Garlock N/A

W15 Call Garlock Call Garlock Call Garlock Call Garlock N/A

surge supressors seriesmodel

NEOPRENE Backed

EPDm Backed

VitONBacked



TA1 PA0084 PA0154 PA0035 PA0084 N/A

TD1-1/2 PA0084 PA0154 PA0035 PA0084 N/A

TA2 PA0090 PA0136 PA0037 PA0137 N/A

TA3 PA0047 PA0194 PA0055 PA0195 N/A

D2AE Call Garlock Call Garlock Call Garlock Call Garlock N/A

DA1/2, DA3/4 PA0088 Call Garlock PA0034 Call Garlock N/A

DA05, DA07, DA10 (NEW) Call Garlock Call Garlock Call Garlock Call Garlock N/A

mine/Construction Duty model NEOPRENE BACKED EPDm VitON

BackedAbrasive Resistant

(Neoprene)100% PtFE

(No Rubber)

MSB 1, MSF 1 PA0084 PA0154 PA0035 PA0084 N/A

MSB 1 1/2 PA0090 PA0136 PA0037 PA0137 N/A

MSB 2 PA0085 PA0191 PA0038 PA0054 N/A

MSB 3 PA0048 PA0196 PA0056 PA0048 N/A

PA0084 PA0103 PA0129

18





WILDENDiAPhRAGm DEsiGN

» Outer sealing bead design on all models. Wilden has recently added many new models to their line of pumps. Accu-Flo, Pro-Flo, Turbo- Flo and Wil-Flo series. The old “M” series pumps are now the new Turbo-Flo series. They have also added a line of new advanced series or bolt-together pumps. All these new names/products utilize the same ONE-UP® pump diaphragm designs.

iNtERChANGEABiLitY

» Versamatic, Dominator, Lutz, storck, Tecnomatic, sureflow, Teledyne, sprague, serflico, Nambang and Whytehall.

CONVERsiON Kits» All Wilden pumps X2-X15 require conversion kits. The X1 series (M1, A1, P1, T1) and the hP250 pump are the only pumps that do not require conversion kits.


A.025, P.025 Call Garlock .25” (6.4 mm) N/A

M1,A1, P1, T1 PA0081 .5” (12.7 mm) 4.9” (124 mm)

M2,A2, P2, T2 PA0077 1” (25 mm) 6.6” (168 mm)

M4, A4, P4, T4, W4 PA0078 1.5” (38 mm) 8.6” (219 mm)

M8, A8, P8, T8, W8 PA0075 2” (51 mm) 11.4” (290 mm)

HP250, H800 PA0315 2” (51 mm) 11.40” (290 mm)

M15, A15, P15, T15, W15 PA0087 3” (76 mm) 14.4” (366 mm)

Dimensions


EPDm Backed

VitONBacked


A.025, P.025 Call Garlock Call Garlock Call Garlock Call Garlock

M1, A1, P1, P.050, T1, PX1, A100P, P100 PA0081 PA0199 / GY0199 PA0031 PA0235

M2, A2, P2, P2R, T2, T2R, PX200, P200, A200P, XPX200 PA0077 PA0092 / GY0092 PA0032 Call Garlock

M4, A4, P4, T4, W4, All PX4's, All P400's, PV400 PA0078 PA0045 / GY0045 PA0083 PA0014

M8, A8, P8, T8, W8, PX8, PX8 SANIFLO, All P800's, PV800 PA0075 / PA0221* PA0044 / GY0044 PA0094 PA0015

HP250, H800 PA0315 PA0040 PA068 PA0140

M15, A15, P15, T15, W15, PX15, PX15 SANIFLO, PX1500, PV15

PA0087 PA0091 / GY0091 PA0033 PA0046


*PA0221 is designed for Plastic Wilden Pumps / PA0075 is designed for Metallic Wilden Pumps. PA0075 can be utilized in both; however, the PA0221 has been designed to better fit the outer bead.


EPDm Backed

VitONBacked


UA.038, UX.050 PA0110 PA0147 / GY0147 PA0009 Call Garlock

UA.050, UH-.050, UH.075 PA0109 PA0148 / GY0148 PA0008 Call Garlock

UH2, UA2, UX3 PA0101 PA0149 / GY0149 PA0107 Call Garlock

UA4, UH4 PA0097 PA0150 / GY0150 PA0108 PA0151

UA8 PA0025 PA0127 / GY0127 PA0117 PA0025

UNITEC (WILDEN)

19





YAMADADiAPhRAGm DEsiGN» All Yamada original equipment diaphragms are 100% PTFE and are retained inside the pump using a metal retaining ring. Garlock has designed ONE-UP® diaphragms for Yamada pumps using the flange/bolt sealing design and elastomer backing for longer service life/performance. We also offer 100% PTFE ONE-UP® diaphragms for customers unable to utilize an elastomer-backed diaphragm, typically for high purity applications. 100% PTFE diaphragms are available for all Yamada NDP and DP series pumps. Elastomer-backed/flange bolt-designed ONE-UP® diaphragms will only fit the new NDP series pumps.

iNtERChANGEABiLitY

» Iwaki, Iwata, hethon, Graymills, Johnson.

CONVERsiON Kits» Required on all pumps NDP20 through NDP80. Conversion kits not required for NDP5, NDP15 series.




CENtER BOLt hOLEs

DiAmEtER BOLt hOLEs

NDP-5 PA0016 .25” (6.4 mm) 4.2” (107 mm) FLANGE/BOLT 3.8” (96.5 mm) 8 .31” (7.9 mm)

NDP-15 PA0059 .38” (9.7 mm) 5.6” (142 mm) FLANGE/BOLT 4.9” (124 mm) 6 .38” (9.7 mm)

NDP-20 PA0060 .75” (19 mm) 7.1” (180 mm) FLANGE/BOLT 6.3” (160 mm) 6 .35” (8.9 mm)

NDP-25 PA0061 1” (25 mm) 8.3” (211 mm) FLANGE/BOLT 7.3” (185 mm) 8 .44” (11.2 mm)

NDP-40 PA0062 1.5” (38 mm) 11.0” (279 mm) FLANGE/BOLT 10.0” (254 mm) 8 .5” (12.7 mm)



model 100% PtFE OUtLEt OUtER DiAmEtER

sEALiNG DEsiGN

CENtER hOLE DiAmEtER thiCKNEss COmmENt

NDP-5, DP-5F PA0123 .25” (6.4 mm) 3.3” (84 mm) RETAINING RING .25” (6.4 mm) .020” (.5 mm) 100% PTFE

NDP-15, DP-10 DP-10F

PA0124 .38” (9.7 mm) 4.4” (112 mm) RETAINING RING .31” (7.9 mm) .035” (.9 mm) 100% PTFE

NDP-20 PA0112 .75” (19 mm) 5.75” (146 mm) RETAINING RING .56” (14.2 mm) .062” (1.6 mm) 100% PTFE

NDP-25, DP-25F PA0113 1” (25 mm) 6.7” (170 mm) RETAINING RING .56” (14.2 mm) .065” (1.65 mm) 100% PTFE

Dimensions

20





YAMADA


EPDm Backed

VitONBacked

AbrasiveResistant

(NEOPRENE)

100% PtFE(NO RUBBER)

NDP-5 / .25” PA0016 PA0201 Call Garlock Call Garlock PA0123

DP-5F / .25” N/A N/A N/A N/A PA0123

NDP-15 (.38" &.5") DP-15 (.5") PA0059 PA0202 PA0002 Call Garlock PA0124

DP-10 DP-10F/ .38” N/A N/A N/A N/A PA0124

NDP-20 / 3/4” PA0060 PA0203 PA0003 Call Garlock Call Garlock

NDP-25 / 1” PA0061 PA0120 / GY0120 PA0004 PA0204 Call Garlock

DP-25F N/A N/A N/A N/A Call Garlock

NDP-40 / 1-1/2”” PA0062 PA0205 PA0005 PA0206 Call Garlock

DP-38, DP-38F NA NA NA NA Call Garlock

NDP-50, NDP-50FAN / 2” PA0063 / PA0321* PA0207 PA0006 PA0063 / PA0321* Call Garlock

DP-50 NA NA NA NA Call Garlock

NDP-80 / 3” PA0064 PA0209 PA0102 Call Garlock Call Garlock

DP-75 / 3" NA NA NA NA Call Garlock


* PA0321 is for non-metallic 2” pumps; the OD has been made without the ridges and is completely flat.

PA0059

Please contact Garlock for ONE-UP diaphragm compatibility for the following pump manufactures along with any others not in this list;

For new product inquires please contact the Garlock Diaphragm Applications group.

» ABEL» All-Flo» Balcrank» Bran+Luebbe» Debem» DorrOliver» Fluimac

» Graymills» Jofee» Larius» Lewa» Lincoln» Murzan» PricePump

» ProMinent» Pumps2000» RamPartsPumps» Ranpump» Samoa» SavinoBarbera» Siemens

» Sotera» Tapflo» Techni-flow» Timmer» Wagner» WASTECORP.Pumps

21



Tel: 1-877-GARLOCK / 315.597.4811 Fax: 800.543.0598 / 315.597.3216www.garlock.com

GARLOCKan EnPro Industries family of companies

Garlock Sealing TechnologiesGarlock Rubber TechnologiesGPTGarlock PTYGarlock do Brasil

Garlock de Canada, LTDGarlock ChinaGarlock SingaporeGarlock GermanyGarlock India Private Limited

Garlock de Mexico, S.A. De C.V.Garlock New ZealandGarlock Great Britain LimitedGarlock Middle East

DIA 6:3 | 08-2014



http://www.garlock.com/?utm_source=ONE-UP-Diaphragm-Catalog&utm_medium=pdf&utm_content=logo&utm_campaign=std

garlock one-up® pump diaphragm catalog · 2019-04-01 · variables such as but not limited to;...

Documents