gas analysis equipment apex pro-series heated sample...

9c

GAS ANALYSIS EQUIPMENT

www.apexinst.com 800-882-3214 /919-557-7300

APEX Pro-Series Heated Sample Line HSLP-64-100The Apex Instruments Heated Sample Lines are designed for the professional stack tester that needs a rugged lightweight flex-ible sample line that can handle the abuse of IRM sampling day after day. The standard core includes one 3/8” PFA tube for the sample and one 1/4” tube for introducing calibration gas at the probe. Both lines have stainless steel overbraid and swaged tube stubs attached.

Apex Pro-Series Heated Sample Line, 100 FT, 3/8 IN & 1/4 IN PFA stainless steel Overbraid Lines, Nomex®/Aramid Felt Insula-tion, Extruded Jacket (orange). Requires Temperature Controller. Apex offers temperature controllers for use with the Pro-Series.

HSLP-64-100100 FT Heated Sample Line 3/8 IN & 1/4 IN PTFE lines, Foam Insulation w/ Oversheath.

HSLP-64-100

Features

• PFA Tubing with Stainless Steel Overbraid - Heated Sample; 3/8” - Unheated Cal-Gas; 1/4”

• 1/2” Nomex® Insulation

• Extruded Orange Durable Jacket for High Visibility, Flame Retardant

• Lightweight & Flexible

• Bend Radius: 10”

• Stainless Steel Tube Stubs

Specifications• Spiral wound heating element for uniform heat distribution• Power Density 23 Watts/ft.• Supply voltage 120V or 240V• Maximum temperature rating 400o (200oC)• Tube maintenance up to 370oF (200oC) at 0oF• Type K thermocouple for control sensor• Nominal O.D. 1.75”• Weight 55 lb. for 100 ft.• Maximum operating pressure: 300 psi

A temperature controller MUST be used on this bundle in order to prevent it from overheating.

Apex offers temperature controllers for use with the Pro-Series

Apex Pro-SeriesDesigned for

Portable Systems

ICH-901Temperature Controller

Higher Temperature Units are Available.Inquire for Custom Lines Manufactured to your Specification.

Temperature ControllerHeavy Duty (High Output) Single Station Digital Temperature Controller, 20A Max, 120V.

ICH-901

10c


800-882-3214 /919-557-7300 www.apexinst.com

CEM TEMPERATURE CONTROLLERS (4 different models)Apex Instruments offers a choice of one or two station Temperature Controllers in three different styles of digital display controllers. All of our temperature controllers have a panel mounted circuit breaker and a separate solid state output relay for high output reliability. The heavy duty controllers have a panel mounted circuit breaker and a separate solid state output relay for high output reliability. Our heavy duty controllers have a separate slow-blow 25 amp fuse that is panel mounted for easy access and are typically used with 50 to 100 foot heated sample lines. These temperature controllers can be used for (CEM) in any application where there is a need to control temperature. The dual station controllers can be used in configurations that require control of any two heated devices such as the probe/oven combination or the probe/heated sample line.

ICH-901

Single Station Digital Heavy Duty (High Output) Single Station Digital Temperature Controller,20A Max, 120V.ICH-901

ICS-902

Dual Station DigitalDual Station Digital Temperature Controller, Solid State Output Relay, 10A Max, 120V.ICS-902

Single and Dual TemperatureController Features• External Vertically Mounted Aluminum Heat Sinks for Better Heat Transfer from Relays.• Compact Size: 8.5” x 7.25” x 6.5” (21.6 cm x 18.4 cm x 6.5 cm)• Oversized Solid State Relays - 25 Amp (50 Amp Available for High Output)• Type K Thermocouple Input (Other Modules Available Upon Request)• Standard Receptacles for Power Output• Alternate Connectors Available (i.e. 4-Pin Circular Connectors)

Features• Fixed or Adjustable Set Points• Four Character LED Display• Fahrenheit or Celsius Operation with Indication• Sensor Break Protection• Microprocessor Based Technology

Single Station Analog Temperature Controller with Internal Relay, 120V, Press-to-Set Digital Indicator in Diecast Aluminum Enclosure, Deg. C Readout. ICS-CV1FSingle Station Analog Temperature Controller with Internal Relay, 120V, Press-to-Set Digital Indicator in Diecast Aluminum Enclosure, Deg. F Readout. ICS-CV1C

ICS-CV1

Product Stations Duty Controller Output Power

ICS-901 One-Station Standard Digital 15 Amps 120V

ICS-902 Two-Station Standard Digital 15 Amps 120V

ICH-901 One-Station Heavy Digital 20 Amps 120V

ICS-CV1* One-Station Standard Analog Inernal Relay 120V

Temperature Controllers

*Add ‘C’ for Celsius or ‘F’ for Farenheit. Comes with press-to-set digital indicator in diecast aluminum enclosure. 240 volt operation is available for all controllers. Add “V” to end of part number. (e.g. ICS-901MV).

Single Station Digital Temperature ControllerSingle Station Digital Temperature Controller, Solid State Output Relay, 10A Max, 120VICS-901M

Compact Rugged

ICS-901M ICS-901MFront View

Digital Display Temperature Controllers• Accuracy to ±0.25% of Span•1/32 DIN Controller

Product Stations Duty Controller Output Power

ICS-CV1* One-Station Standard Analog Internal Relay 120V

Temperature Controllers

ICS-CV Station Digital Temperature ControllerThe Apex ICS-CV temperature controllers are basic on-off microprocessor based temperature controllers mounted in a die-cast aluminium enclosure. The temperature set-point is easily set by pushing the button and rotating the dial to the desired temperature on the LED display. Actual temperature is continuously displayed.

11c


www.apexinst.com 800-882-3214 /919-557-7300

GAS CONDITIONERSSGC-4400 RACk MOUNT STIRLING GAS CONDITIONER / COOLER The Apex Instruments SGC-4400 Stirling Gas Conditioner is specifically de-signed for removing moisture from process gas samples prior to gas analysis. This new style gas cooler uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for cooling the gas to a constant dew point. The FPSC has several advantages over the conventional Rankine Compressor or Ther-moelectric Refrigeration units. For example, the FPSC cooler module uses a small quantity of environmentally safe helium gas as a refrigerant. The module is hermetically sealed in a stainless steel casing allowing for fast and easy installation and replacement when necessary. 120VAC, Dimensions (HxWxD): 17” (43.18 cm) x 16” (40.64 cm) x 7” (17.78 cm). Weight: 28 pounds (12.7kg).

SGC-4400

SGC-4400(Front & Back View)

Features• Environmentally Friendly• Uses Helium (He) as a refrigerant (Natural, Non-flammable, Inert)• No CFC’s• Energy Saving High Efficiency, Super Cooling Capacity• Can reach -50°C• 6x efficiency of thermoelectric (peltier) coolers• FPSC uses less that 40w of electricity• 12 VDC power supply Digital Temperature Control• Constant set temperature Environmentally Friendly

Specifications• Digital Temperature Control ± 1°C, LED Display• Cooling Capacity > 40 watts• Dual Path Chiller Block Anodized Aluminum• Reverse Flow Condensate Separator C276 Alloy - 1” O.D. x 4” Active Zone• Flow Rate two-stage configuration: 4 lpm @ 15% moisture• Dew Point 40°F (> 1% H2O vapor by volume)• Alarm Output - optional Switched 6VDC• Freeze Protection 80w heater

• Ambient Operating Temperature 0 to 50°C (32°F to 122°F)• Peristaltic Drain Pump Dual Head / size 15 tubing• Inlet / Outlet Fittings 1/4” tube unions• Power Requirements 120VAC / 2.5 amps• 19” Rack Mount• Weight - 28 lbs• Dimensions - 17” H x 16” W x 7” D

SGC-4000HGP

• 19” Rack Mount• Weight - 28 lbs• Dimensions - 17” x 16” x 7”

Environmental Friendly • Uses Helium (He) as a refrigerant (Natural, Non-flammable, Inert) • No CFC’s • Energy Saving High Efficiency, Super Cooling Capacity • Can reach -50° C • 6x efficiency of thermoelectric (peltier) coolers. • FPSC uses less than 40w of electricity • 12v DC power supply Digital

SGC-4000HGP RACk MOUNT STIRLING GAS CONDITIONER / COOLER The Apex Instruments SGC-4000HG Stirling Gas Conditioner is specially designed for removing moisture and acid gases from flue gas samples. This new style gas chiller uses an industrial grade super efficient Free Piston Stirling Cooler (FPSC) for chilling the gas to a constant dew point. The FPSC has several advantages over the conven-tional Rankine Compressor or Thermoelectric Refrigeration units. For example, the FPSC chiller module uses a small quantity of environmentally safe helium gas as a refrigerant. The module is hermetically sealed in stainless steel casing allowing for fast and easy installation and replacement when necessary.

SGC-4000HGP

Specifications• Digital Temperature Control +/- 1 degree C, LED Display• Cooling Capacity >40 watts• Dual Path Cooling Block Anodized Aluminum• Condensate Bottle 1000 ml (plastic coated glass)

Temperature Control • Constant set temperature • Temperature alarm output Weight and Dimensions • Portable with collection cabinet Weight 37 lbs. without sorbent Dimensions: 22”x13.5”x23.75” • 19” Rack Mount • Weight 25 lbs. Dimensions: 17”x16”x7”

• Reverse Flow Condensate Separator Silcosteels-CR Treated Stainless Steel 1” OD x 4” Active Zone• Maximum Flow Rate 2 liters per minute @ 20% H2O/Channel• Alarm Output Switched 6v DC

• Freeze Protection 80w Heater• Ambient Operating Temperature 0 to 500 C• Power Requirements 120v AC/2.5 amps

Available in Rack Mount or Portable versions

12c


800-882-3214 /919-557-7300 www.apexinst.com

Apex Instruments Flow drawerAFd-510The Apex AFD-510 is designed to be an easy, conve-nient, and compact way to control the flow of both stack and calibration gases.

This new panel can flow gas to either the analyzer bank (Direct calibrations) or the probe (System calibrations), and has both automatic and manual controls.

This unit has been designed with simplicity in mind. It has the same common solenoids and a simplified wiring protocol.

The calibration gas in use is identified by a LED along with which mode you are in and if you are sampling or calibrating. One big benefit of the Apex Instruments AFD-510 is that in sampling mode all solenoids are at “rest” which greatly extends the life of the unit.

aFD-510

Features• 11 Calibration Gas Channels (including zero and span)• 5 Output or Analyzer Channels• 8 Valved Rotometers for Fine Flow Control/Adjustment 5 analyzer rotometers 1 vent rotometer 1 probe calibration 1 sample flow rotometer• 19” Rack Mountable• Designed for Easy Maintenance and Repair• Manual or Automatic Operation

Specifications

Input Cal-Gas Channels: Flowmeters Available: Sample 0-10 LPM Vent 0-10 LPM

Output Gas Channels: Flowmeters Available: 0-0.5 LPM 0-1.0 LPM 0-2.5 LPM 0-5.0 LPM

Voltage: 110.220 VAC, 50/60 Hz

Power: 25 Watts

Mounting dimensions: 4U, 19” Rack Mount, 7” Height x 19” Width x 18” Depth

Weight: Approximately 24 lbs

Pressure Gauge: 0-15 psi

Connections: 1/4 Inch Stainless Steel Tube Union

AFd-510 Shown in Portable Gas Analysis Unit

AFd-510

13c


www.apexinst.com 800-882-3214 /919-557-7300

AMETEK Process InstrumentsManufacturer of individual analyzers and turn-key CEM rack systems for dry-basis monitoring of pollutants in flue gases. Analyzers are available for use in new or existing extractive CEM rack systems (or other instrument racks) where the sample gas entering the analyzer is non-condensing at ambient temperatures. www.ametekpi.com.

California Analytical InstrumentsCalifornia Analytical Instruments, Inc. (CAI) provides quality gas analyzers and systems used in Industrial, Environmental, Process and Automotive Emissions applications. CAI products include Infrared Analyzers; Chemiluminescence Analyzers, Oxygen Analyzers, Flame Ionization Analyzers, UV Fluorescence Analyzers, FTIR, Integrated Systems, Specialty Products, Photoa-coustic IR Analyzers. www.gasanalyzers.com.

BUHLER TechnologiesA broad range of applications like boiler trim, emis-sion monitoring, ammonia slip monitoring, combustion efficiency, LEL warning indication or inner atmosphere control require analyzers with different measuring prin-ciples. Bühler offers optical, paramagnetic and zirconium technologies as well as tuned diode laser (TDL) gas analyzers. www.buhler-technologies.com/gas_analy-sis/products/analysers.

BRAND GAUSNOx, O2 and NOx-O2 gas analyzers specifically designed for use in continuous emissions monitoring systems (CEMS) for gas turbines; designed for reliabil-ity and simple operation; with industrial interfaces for continuous visible diagnostics and intuitive calibration without the use of delicate character displays or compli-cated menu systems. www.brandgaus.com.

ECOMECOM America Ltd., manufactures portable emission / combus-tion analyzers for many applications. From single gas Oxygen and Carbon Monoxide analyzers for flue gas testing to multi-gas analyzers measuring Oxygen, Carbon Monoxide, Nitric Oxide, Ni-trogen Dioxide, Sulfur Dioxide, & Hydrocarbons offered in several configurations, we have instruments for most combustion applica-tions. Several models are approved and recognized by Regional, State, and Federal Environmental and Air quality Regulatory AgenciesECOM. www.ecomusa.com.

ENVIRONICS AnalyticsKnown for computerized gas flow instrumentation; especially gas mixing technology, based on very precise control of thermal mass flow controllers, combined with Environics computerization and calibration results in improved accuracy to +/- 1% of setpoint.www.environics.com.

Gas Analyzers

14c


800-882-3214 /919-557-7300 www.apexinst.com

Gas Analyzers

BacharachBacharach, Inc. is a world leader in the design, manufacture, and service of advanced equipment for the measurement and detection of gases and liquids. The company’s extensive product line includes instruments that detect, measure, and record combustion and environ-mental gases, temperature, relative humidity, air velocity, and other air quality and safety parameters. A full line of refrigerant recovery equip-ment for residential, industrial, and automotive applications further extends Bacharach’s family of products. www.bacharach-inc.com.

NovaNova Analytical Systems Inc. has been designing and manu-facturing dependable gas analysis equipment for over 30 years. Nova offers portable gas analyzers, continuous gas analyzers and sample conditioning equipment for industrial applications. Nova’s integrated approach to design and manufacturing al-lows us to configure our products to suit each application, while still being able to offer the best price, long-term reliability and proven technology in each analyzer. www.nova-gas.com.

TELEDYNE INSTRUMENTS (API)TAPI offers products for continuous emissions monitoring, including: Ultraviolet Absorption Analyzers, Paramagnetic Analyzers,Infrared Gas Filter Correlation Analyzers, Nondis-persive Infrared (NDIR) Analyzers, Ultraviolet Fluorescence Analyzers, Chemiluminescence Analyzerswww.teledyne-api.com/overview.asp.

VIG INDUSTRIESOffers microprocessor controlled hydrocarbon analyz-ers; Dual or Single Channel (FID) flame ionization detector based (GC) gas chromatography, (VOC) volatile organic compounds, and (THC) total hydro-carbon analyzer systems. www.vigindustries.com/products.htm.

SERVOMExKnown for paramagnetic sensing technology and the development of zirconia, photometric, thick film and plasma technologies. The result is high-performance, cost-effective gas analysis, delivered through a portfolio of dependable products ranging from portable gas anal-ysers to complex process solutions. www.servomex.com/servomex/web/web.nsf/en/servopro-1440.

15c


www.apexinst.com 800-882-3214 /919-557-7300

Burrell Oxsorbent solution for determining oxygen in gas analysis, 8 oz bottles.

B39-710

Burrell Cosorbent, solution for determining Carbon Monoxide in gas analysis, 8 oz bottles.

B39-720

Burrell Disorbent solution for determining Carbon Dioxide in gas analysis, 16 oz, bottles.

B39-730

METHOD 3 ORSAT ANALYZER

Model Description Price

OG-1V/18 Burette, with 3-way Valve and Water Jacket, PTFE ValveBody, 100 mL, Scale 0-30% x .01

$326.00

OG-2 Aspirator Bottle $35.25

OG-5V Contact Pipette, Valved, Insert Only $158.00

OG-5B Pipette Bottle with Hose Barb $48.75

GA-18C Solid Cap with #18 Threads and Seal $8.50

GA-30B Bored Cap with #30 Threads, 22 mm ID $6.00

GA-30S Silicone Seal Ring #30 Threads, 22 mm ID $6.00

TB-3V-P Tedlar® Bag,Three Compartment with three Poly Valves $20.50

TR-5/3 Black Rubber Tubing, 5/16” OD x 3/16” ID, per foot $3.25

VC2-50 VersaCase Clamp, 50 mm with Knurled Brass Thumb nuts $16.00

VSB3 VersaCase 3, with Hinged, Removable Doors and Mounting Rail $360.00

VSB2-MP VersaCase Mounting Plate $35.00

Orsat Accessories

Squeeze Bulb PumpThe heavy wall rubber Squeeze Bulb Pump with stain-less steel valves and connections can be used for gas sampling, pressure source for calibrations and leak tests, and for conditioning probes and sample lines.

A-350

Method 3 determines CO2 and O2 concentrations and dry molecular weight of a sample from an effluent gas stream. The gas sample is analyzed for CO2 and O2 on a gas absorbtion basis, results are expressed in precentage units. For dry molecular weight determination, either an Orsat or a Fyrite analyzer may be used for the calculations.

The Orsat Analyzer Train is designed specifically for Method 3, for analysis of integrated or grab bag samples collected in Tedlar® bags. A liquid filled leveling bottle moves the integrated sample through a graduated glass burette and absorption pipettes containing absorbing reagents. The result-ing changes in volume measure percent of O2 , CO2 and CO. The burette is water jacketed for temperature stability.

VSC-33

Replacement Fluids

Domestic Delivery only. Sold by case (12 bottles per case). Drop shipped by vendor due to Hazardous Classification.

Packing List

16c


800-882-3214 /919-557-7300 www.apexinst.com

COMBUSTION GAS ANALYZERS

Model descritption

B10-5000 CO2 Fyrite® Gas Analyzer, Range 0-20%


USA KitsCO2 Testing

Model descritption


Export Single Kits CO2 Testing

Model descritption

B10-5020 CO2 & O2 Fyrite® Gas Analyzer, CO2 Range 0-20%, O2 Range 0-21%

B10-5021 CO2 & O2 Fyrite® Gas Analyzer for Export, CO2 Range 0-20%, O2 Range 0-21%- EXPORT ONLY.

duplex Kits

Model descritption

B10-5011 O2 Fyrite® Gas Analyzer, Range 0-21%


O2 TESTING

Model descritption


O2 TESTING

Model descritption

B11-7052 CO2 Fyrite® Gas Analyzer Repair Kit, Range 0-20% + 60%

B11-7054 O2 Fyrite® Gas Analyzer Repair Kit, Range 0-20% + 60%

Repair KitsIncludes a bottle of Fyrite® fluid, valve plunger gasket, top gasket, screws, diagram and envelope of filtering material.

FYRITE® GAS ANALYZERS

Fyrite® CO2

Fyrite® Gas Analyzers are fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite® Analyzers are available for either CO2 or O2 analysis. Fyrite® Indicators have a broad range; they may be exposed to ambient temperatures from -34° to 65°C (-30° to 150°F), and gases up to 450°C (850°F) may be tested with standard aspira-tor sampling equipment. Single analyzers and additional ranges are available along with refill and repair kits. Call for details.

Model descritption

B11-7047 CO2 Fyrite® Gas Analyzer Refill Kit, Range 0-20% + 60%

B11-7050 O2 Fyrite® Gas Analyzer Refill Kit, Range 0-21% + 60%

Refill KitsIncludes two Bottles of Fyrite® Fluid, top gasket, screws and envelope of filtering material.

Model descritption

B10-5057 CO2 Fyrite® Fluid , Range 0-20% + 60%, 3 (2oz.) Bottles per Case

B10-5060 O2 Fyrite® Fluid , Range 0-20% + 60%, 3 (2oz.) Bottles per Case

Fluids

For more information on Bacharach Products visit: www.bacharach-inc.com

17c


www.apexinst.com 800-882-3214 /919-557-7300

Three 1/4” Port Stainless Steel Filter AssemblyAccepts 25 mm x 64 mm filter.

SFA-2564-V2

SFA-2564-V2

Product Description Temperature Rating Pressure Filters

SFA-116IL Stainless Steel,1/4” FNPT, 3” long. 200°C (400°F) 5000 PSIG 12 x 32mm, GF123270K, GF123270S

SFA-H130S-TE Stainless Steel, heatable, 4.57” long, 1/4” end ports. 200°C (400°F) 30 PSIG 25 x 64mm, GF256470K, GF256470S

SFA-137G Glass Filter, T-Type, 1/4” FNPT, 4.49” long. 200°C (400°F) 150 PSIG 25 x 64mm, GF256470K, GF256470S

TFA-122P PTFE, 1/4” FNPT, 3.86” long. 150°C (300°F) 100 PSIG 12 x 57mm, GF125770K, GF125770S

760N-2 Nylon, side ports, 1/4” FNPT, 5.51” long. 50°C (120°F) 100 PSIG 25 x 64mm, GF256470K, GF256470S

Filter Housing

Product Description

GF123270K Filter Cartridge, Borosilicate glass microfiber with Fluorocarbon resin binder, 12 x 32mm, Maximum Temperature 300°F, 10/pk.

GF123270S Filter Cartridge, Borosilicate Glass Microfiber with inorganic binder, 12 x 32mm, Maximum Temperature 900°F, 10/pk.

GF256470K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon resin binder, 25 X 64mm, Maximum Temperature 300°F - 10/pk.

FiltersProduct Description

GF256470S Filter Cartridge, Borosilicate glass microfiber with inorganic binder, 25 X 64mm, Maximum Temperature 900°F, 10/pk.

GF125770K Filter Cartridge, Borosilicate Glass Microfiber with Fluorocarbon resin binder, 12 x 57mm, Maximum Temperature 300°F, 10/pk.

GF125770S Filter Cartridge, Borosilicate Glass Microfiber with inorganic binder, 12 x 57mm, Maximum Temperature 900°F, 10/pk.

GAS SAMPLE FILTER HOUSINGS

SFA-116IL SFA-137G TFA-122P 760N-2

GAS SAMPLE FILTER ELEMENTSApex Instruments stocks two types of Borosilicate Glass Microfiber Cartridges to accomodate all particulate removal needs. For testing in locations where highly reactive and/or corrosive gases are present Apex offers the K-Type High Temperature with Fluorocarbon Resin Binders. The S-Type has low temperature cartridges with Inorganic Resin bind-ers for filtering gases at temperatures up to 480°C (900°F).

Product Description: 10 per pack

GF123270K 12 mm x 32 mm, maximum temperature of 150°C (300°F)

GF125770K 25 mm x 57 mm, maximum temperature of150°C (300°F)



GF123270S 12 mm x 32 mm, maximum temperature of 480°C (900°F)



GAS SAMPLE FILTER ELEMENTS

Traditional in-line gas sample filters are used to remove particulate prior to analyzeation to protect your valuable equipment. Replacement filters not included.

OMNIFLOw FILTER HOLDERSThe Multi-Port Stainless Steel Filter Assembly has a 200°C (400°F) rating and is typically used for the filtering of combustion gases prior to analysis. The OmniFlow Filter Holder (N6) is spring loaded and designed for positive sealing. It features 6 ports (3 sample inlets, 1 calibration, 1 pressure and 1 sample exit). Each port is 1/4” FNPT (accepts 25” x 64” filters). Cable entry seals sold separately.

SFA-2564-4N6

Six Port Stainless Steel Filter AssemblyAccepts 25 mm x 64 mm Filter.

SFA-2564-4N6

18c


800-882-3214 /919-557-7300 www.apexinst.com

CONdENSERS

SC-9A SC-9A

SC-9U

Inlet

Apex Instruments Stainless Steel Condensers are designed to be submerged in an ice-water bath for condensing and removing water vapor prior to analysis. Use in conjunction with the peristaltic pump (see recommended pump below) to continuously remove the condensate. Condensers are recommended to be used in a series of two or more. Custom-made condensers available please call for details on water jacketed condensers, chillers and appropriate pumps.Stainless steel condenser assembly with vessel, cap with Inner tube, clamp and gasket. Two 3/8” Ports and 1/4” drain tube.sC-9aAdapter, 3/8” button hook adapter for connecting condenser in series. sC-9u

Borosilicate Glass CondensersApex Instruments offers two types of borosilicate glass condensers. The products include caps and seals.

The double-Headed Single-Speed Peristaltic Pump (PP927-049) is ideal for removal of condensate from glass and stainless steel condens-ers. Each head provides a flow rate of 98cc/min. and can be used for two independent uses or combined when needed to increase the flow rate or pressure capability. Additional peristaltic pumps are available.

PP927-049

Single speed, dual head peristaltic pump, 49 rev/min, flow rate 98 ml/min per head.

PERISTALTIC PUMP

Product description

VGC-9 Glass Condenser-9” x 2” OD, 3/8” tube unions for inlet & outlet, 1/4” drain tube. NO SEALS.

VGC-12 Glass Condenser-12” x 2” OD, 3/8” tube unions for inlet & outlet, 1/4” drain tube, water jacket. NO SEALS.

VGC-12M Glass Condenser-12” x 2” OD, with GL-18 threads for inlet, outlet & drain, threads accept 1/4” or 3/8”with proper seal, water jacket.

VGC-12MA Glass Condenser-12” x 2” OD, with GL-18 threads for inlet, outlet & drain, threads accept 1/4” or 3/8”with proper seal, water jacket w/caps & seals.

The VGA-12A Condenser allows the flow of ice water around the sample stream. Glass condenser with 3/8” tube unions for inlet and outlet, 1/4” drain on bottom, water jacket, 2” OD, 12” height.VgC-12a

The VGA-9A Condenser is designed to be submerged in an ice-water bath for condensing water vapor. Glass condenser, coaxial design with 3/8” tube unions for inlet and outlet, 1/4” drain tube, 2” OD, 9” height.VgC-9a

VGC-12AVGC-9A

19c


www.apexinst.com 800-882-3214 /919-557-7300

Gas Analysis Equipment

Apex Dilution Panel .................................... 8cApex Flow Draw ......................................... 12cCombustion Gas Analyzers ........................ 16cCondensers ................................................ 18cCondensers, Borosilicate Glass ................. 18cFilter Assemblies ........................................ 6cFilter Holders .............................................. 6cGas Sample Filter Elements ....................... 6cGas Conditioners ........................................ 11cGas Analyzers ............................................ 13c-14cGas Sample Filter Housing......................... 17cGas Sample Filter Elements ....................... 17cIRM, Transportable IRM System ................ 3c

Method 3, Orsat Analyzer ........................... 15cPMI Dilution Probe...................................... 8c Pre-Filters ................................................... 4cPro-Series Heated Sample Line ................. 9cProbe, Assemblies ...................................... 5cProbe, CEM ................................................ 5cProbe, IRM ................................................. 4cProbe, IRM Ceramic Heater ....................... 5cProbe, Stainless Steel Liners ..................... 5cPumps, Peristaltic ....................................... 18cTemperature Controllers ............................. 10c Tri-Sample Probe ....................................... 7c

www.apexinst.com

919-557-7300 or 800-882-3214Fax: 919-557-7110

Website: www.apexinst.comContact: [email protected]

Apex Instruments, Inc.204 Technology Park Lane

Fuquay-Varina, N.C. 27526, U.S.A.

Accessories cAtAlog

Software

Tubing & Filters

Balances

Please feel free to call our friendly sales staff today!

Vance JonesDomestic Sales,

Customer [email protected]

Janet NicholsSales Manager

[email protected]

John StauberInternational [email protected]

Customer [email protected]@apexinst.com

ACCESSORIES

FLOW, PRESSURE & TEMPERATURE

MERCURY ANd gAS SAMPLINg SYSTEMS & EQUIPMENT

gAS ANALYSIS EQUIPMENT

APPENdIX

INdEX

ISOKINETIC SAMPLINg EQUIPMENT

Phone: 919-557-7300 or In the U.S. 800-882-3214Monday-Friday, 8:00 a.m. to 5:00 p.m. (Eastern Time)

Fax: Order at your convenience 24 hours a day, 7 days a week 919-557-7110

Website: www.apexinst.com

Please visit our website for additional product information, new product releases, updated materials, manuals, reference data and valuable links.

Solutions for Source Sampling Equipment

Apex Instruments is a world leader in the manufacture, design and distribution of source sampling equipment. We are located approximately 20 miles from the United States Environmental Protection Agency (U.S. EPA) in Research Triangle Park, North Carolina. Our equipment complies with emissions measurement standards for stationary combustion sources in accordance with EPA guidelines. Depend on Apex Instruments to provide you with the proper, well-engineered equipment for consistent, accurate and reliable results.

TECHNICAL SERVICESApex Instruments understands the needs and high demands of the individuals working in the source sampling industry. Government agencies, consulting firms and private industries throughout North America and 50 countries around the globe, are the primary users of our equipment. Our knowledgeable staff includes skilled industry professionals, stack testers and chemists. They can help you make important decisions regarding your specific application needs.

CUSTOM FABRICATION & ASSEMBLYApex Instruments’ custom-designed facility was built in 2005. We design, build and expedite all equipment orders quickly through our in-house engineering, production and welding departments. We continue our steady commitment to quality in compliance testing by consistently designing and developing reliable source sampling equipment. We folllow guidelines set by U.S. EPA Reference Methods and always keep the genuine needs of the stack samplers in mind.

CALIBRATION SERVICESApex Instruments offers dedicated, climate-controlled, precision calibration services for a variety of measuring instruments to keep your gas meter, orifice and pitot tube calibrations up-to-date. Our trained staff utilizes reliable calibration equipment and tools like the NIST Certified Bell Prover, wet test meters, electronic flow calibrators and wind tunnels. We offer a certificate of calibration when requested.

AWARDSApex Instruments received the Safety and Health Achievement Award (SHARP) from the North Carolina Department of Labor. The program recognizes small to medium size businesses that establish and maintain effective safety standards and health programs. We were also ranked in the top 500 by Inc. Magazine as being one of the fastest growing privately held companies.

ACCESSORIES

Mercury Spare Parts, XC-522 / XC572 Components ...............................................3d - 4d Filter Media .................................................5d - 6dSample Recovery ....................................7d - 8dSample Recovery Bottles ...........................9d Balances ...................................................10d - 11d

Desiccator and Desiccants ........................12dSilica Gel, Drierite® Desiccants Dew-Point Meters .......................................13dCam-Lock, FlangesPort Adapters & Packing Glands ..........14d - 15d Meter Calibration ........................................16d

Calibration Equipment & Services ........17dOrifice Flow Meters, Flow Meters ..............................................18dInclinometers ............................................19d

Tubing, Dry Gas Meters,Electrical / Electronic Parts ....................20d - 22dStainless Steel Fittings, Quick Connects .......................................23d - 24dPumps & Accessories, Equipment Cases ....................................25d- 26dMonorails, Manuals & Reference Materials ............................27d - 28dIsokinetic Calculator& Spread Sheet, Software .....................29dAccessories Index ...................................30d

31d www.apexinst.com 800-882-3214 /919-557-7300

ACCESSORIES

Delivery:Most orders are shipped within 24 hours of receipt. Please allow extra time for custom orders. Shipping times vary according to the requested shipping service. If you have questions about your shipment please email our shipping management at [email protected].

Return Merchandise AuthorizationCustomers wishing to return items for service or credit need to contact our sales associates for an RMA. Contact by email at [email protected] or by phone (919) 557-7300 or toll free (800) 882-3214.

PricingPrices are published for U.S. customers only. International customers should contact their local distributor. Prices are in U.S. Dollars, FOB shipping point, or Ex Works for International orders. Please confirm current prices by phone, fax or email. Please refer to our price list for a complete list of part numbers and kit configurations.

PaymentFor your convenience, MasterCard, VISA and American Express arewelcome. Company purchase orders are accepted upon credit approval.

We back up this commitment with extensive knowledge of our products, good communication and an excellent customer service history. Our equipment isdesigned by experienced stack testers who know what you face when performing compliance testing.

We encourage you to suggest ideas to improve our equipment. We work closely with you, over the long term, to provide the best equipment for your needs.

CUSTOMER SATISFACTION is guaranteed at APEX INSTRUMENTS.

Hours of Operation:Monday through Friday from 8:00 am

until 5:00 p.m. (EST).

Apex Instruments, Inc. 204 Technology Park Lane

Fuquay-Varina, NC 27526 USA

In U.S. Call Toll Free:1-800-882-3214

Local: 1-919-557-7300fax: 1-919-557-7110

e-mail: [email protected]

www.apexinst.com


ACCESSORIES

MERCURY SPARE PARTS

Model description

M-PCB-DAC-VER1 (DAC) Board for XC-6000EPC, Dual PC-Based Hg Console, POP, XC-6000EPC Populated Printed Circuit Board for Data Acquisition and Control

PCB-TC/MUX Populated TC/Mux Board for use in XC-6000EPC Mercury Console, POP, 8 Type K TC Channels with External Signal and Moisture Analyzer Inputs

PCB-LED-HG Board, LED Display

EL-EBR-2310 D-Link Router, IEEE 802.3/3u, IEEE 802.11b/g Wireless-G Broadband Router, used in Meter Consoles in Storm Case Enclosure only

EL-WBR-1310 D-Link Router, WBR-1310 Wireless G Router - 54Mbps, 802.11g, 4-Port, used in Meter Consoles in SKB, Environmental Enclosures

GP-C131-11 Pump, BTC Diaphragm Pump, Brushless Motor, 10,000 HR, Max Vacuum 20”HG, 12VDC, 3900 RPM, Max PSIG 24”

DGM-SK25-5701 Dry Gas Meter w 5701 Optical Encoder, Metric, Model SK25 with Bushings and Fittings

EL-670-OA938 AC Fans 92mm 115VAC 50CFM

AWM-4360 Airflow Sensor, Signal Conditioning: Amplified; Flow/Pressure Range: + 6000 sccm (6.0 SLPM); Linear Range 1LPM; Port Style: Manifold, (Stainless Steel Flow Controller)

MERC DISK Back-up Software System Disk Set

M-AM2312 Valve, 3-Way, .055/.048 Orifice, 12V

VSO-1SV Valve, Solenoid, Proportional. Model VSONC-3S11-IC-FO Manifold Mount with Wire Leads and 11.5VDC

SP-MPS-V8U-AGE Sensor, Pressure, 0-30” Hg, 1 NPN/PNP Open Collector Transistor Output, 30VDC, 125mA

BARO-A-4V Barometric Pressure Sensor, 600 to 1100 mbar, Temperature Compensated, Amplified Output

M-CBR10A-M Breaker, Electrical, 10A, MAG, Panel Mount Magnetic Type Circuit Breaker Rocker Switch, 5 Amp. Horizontal Mount. Typically Used in 120V Consoles as Probe/Oven Breaker Switch

M-CB15A-M Breaker, Electrical, 15A, MAG, Panel Mount Magnetic Type Circuit Breaker, 15 Amp., Typically Used in 120V Consoles as Main Breaker

D-60A Power Supply, 5V@6A, 12V@4A, Dual

EL-P1082-031 Connector, A TO B USB, Panel Mount

TC-PJK ThermoCouple Jack, Type K, Panel, Snap-In

AM-T3107000 C16-1 Series Amphenol Circular Connector. High Grade Plastic for Harsh Environmental Conditions. Panel Mount Straight Female Slots, 7 Slot (6 + Ground (First Mate/Last Break)

COOLERSSSR-330-25 Relay, SSRT, 25A 110/240V

SGC-TR4/7-SCR Heat Exchange Assembly. Heat Exchange Assembly, Silico Steel Coated, 4” inner Tube, 7” overall with outer tube.

GL45-1000SCR Insert, Assembly, 1000ml, Silico Steel Coated, for Condensate Bottle

GA-GL-45S Seal for 1000ml Bottle

PRObESTC-SP-K Thermocouple Plug, Mini, Type K, Male

WK-125C1 Replacement Thermocouple, Magnesium Oxide Insulation, Type K, 1/8” Diameter, Per Foot. Estimate: 1 TC Same Length as Probe, 1 TC 4” Shorter than Probe Length, 1 TC 1”

MPT-6-133H Modular Pitot Tip (S-Type)

HGH-4T463W Replacement Probe Heater, 4-ft, 463 Watt

HGH-5T1650W Replacement Probe Heater, 5-ft, 1650 Watt

HGH-STR172 Replacement Probe Heater 6-ft, 2000 Watt

HGH-2T144W Replacement Probe Heater, 2-ft, 575 Watt, (used on all probes, exit end of probe)

HGH-9T838W Replacement Probe Heater, 9-ft, 775W

HGH-12T1000W Replacement Probe Heater, 12-ft, 1000W

PF-4/32BSCL Flange, 4” 150 lb., with Cam-Lock Connector

PF-4/40CLS 4 inch Bored Pipe Flange, 150 lb., Pattern, Stainless Steel, 2.670 Bored Diameter, welded size 40 Cam-lock Connector

PG-32/40CL Packing Gland, Oversheath, 2” Stainless Steel Body, Cam-Lock

PG-32S Packing Gland, Stainless Steel

HGP-STA Adapter, Small Trap, 6mm, Stainless Steel

PRObE ACCESSORIES

CONSOLE ANd SPARE PARTS

PF-4PG38S Flange, 4”, 150 lb., 2” Pipe, 2” Packing Gland, Stainless Steel

PF-6PG38S Flange, 6”, 150 lb., 2” Pipe, 2” Packing Gland, Stainless Steel

PF-4/32BS Flange, 4”, 150 lb., 2” FNPT, Stainless Steel

PF-4/6CLS Flange, Universal, 4” or 6” Port, 2 1/2” Cam-Lock (used for temporary applications)

PRObE ACCESSORIES

4d 800-882-3214 /919-557-7300 www.apexinst.com

ACCESSORIES

XC-522 and XC-572 Components ListPart Number Description QC-MAN-M2 QC-Manometer, M-1/4HB, Delrin XC-10U Black RotoRack Shallow Case M-RA911 Switch, Curvette, EC Comp., I-O AM-MCP Replacement Meter Console Wired Amphenol Sub-Assembly M-422B Bracket, Manometer, Adjust, Stainless Steel M-422DS Manometer Displacer Knob L-441160 Latch, Panel, Screw, Large, Sou 3439T12 Webbing, 2”, Black Nylon M-CBR5A-M Magnetic Type Circuit Breaker Rocker Switch, 5 Amp., 120V M-CBR3A-M Magnetic Type Circuit Breaker Rocker Switch, 3 Amp., 240V

Part Number Description TC-765KF Display, TC, PNI, LED, 120/220V M-SD31 Controller, Temp, Red LED, Watlow MC-T Timer, MC, Veeder-Root M-SCKT15A Conn, Pwr, IEC Inlet 15A/250V M-49BK Recept, EL, Snap-In, Term M-31302A Switch, TC. 7 Channel TC-PJK TC Jack, Type K, PNL, Snap-In QC-BHF8-SS QC, Blkhd, 1/2IN-1/2TU, F, SS QC-BHF4-SS QC, Blkhd, 1/4IN-1/4TU, F, SS QC-BHF6-SS QC, Blkhd, 3/8IN-3/8TU, F, SS QC-BHM6-SS QC, Blkhd, 3/8IN-3/8TU, M, SS B2VH-6S Valve, Ball, 3/8TU, SS, PNL, Nut NV3HA-6S Valve, Needle, Angle, 3/8T-3/8T, S DGM-110 Meter, Dry Gas, 110 Rockwell G301U Gage, Vac, 0-30HG, 1.5IN, PNL M-42210 Manometer, Dual, PNL, 0-10” H2 QC-MAN-F3 QC-Manometer, F-1/8MNPT, S

1234567891011121314151617

18192021

22

23242526

27

xc-522 Source Sampling conSole (engliSh) xc-572 Source Sampling conSole (meTric)

TC-765KF

Temperature Display

Manometer Quick Connects

Fine Control Valve

Manometer Zero Adjust Knobs

Manometer Level Adjust

Standard Stainless Steel Pitot Quick

Connects

Standard Stainless Steel Sample Quick Connect

Standard StainlessSteel Female Pump Connection (Pressure)

UmbilicalCable Power Connection

Color Coded Thermocouple Jacks

7-ChannelTemperature

Selector Switch

Vacuum Gauge

Elapsed Timer

Rugged Custom Molded X-Case

Digital Filter and Probe Temperature

Controllers

Stainless Steel MaleNon-Reversible Pump

Quick Connect(Vaccum)

Strap

9

10

11

1

7

XC-10U19

13

4

21

ElectricReceptacle

Power Connect Inlet

25 3439T12

Heavy Duty Panel Latches

24 L-441160

XC-522 Dry English Gas Meter14 dgM-110

CoarseControl Valve

12 b2VH-6S

Dual Column

Manometer

16 M-42210

1718 QC-MAN-M2

QC-MAN-F32 M-Sd31

MC-T

g301U

3

15

M-31302A 6

TC-PJK

QC-bHM6-SS

QC-bHF6-SS

5M-49bK

QC-bHF8-SS8

QC-bHF4-SSAM-MCP NV3HA-6S

M-422b22

M-422dS23

Rocker Switches

M-RA91120

M-SCKT15A

xc-522

28 dgM-AP25

XC-572 Dry Metric Gas Meter

XC-572 (Metric) DGM-AP25 Meter, Dry Gas, AP25 W/Union 28

Magnetic Type Circuit Breaker Rocker Switch

M-CbR3A-M27

M-CbR5A-M26

Call for information on 110V / 240V Models.


ACCESSORIES

Apex Instruments offers a wide range of filter media to meet any sampling requirements. Listed below are the standard media and sizes that Apex Instruments normally stock. Additional materials and sizes are available upon request.

FILTER MEDIA

QUARTZ FIBER FILTERSQuartz Fiber Filters are manufactured from pure quartz with-out a binder and are frequently used for sampling for metals analyses and acidic gases. These filters are preheated to reduce organic contaminates.

Model description

GF-2Q 2 inch Quartz Fiber Filters-25/box

GF-25Q 25mm Quartz Fiber Filters-100/box

GF-3Q 3 inch Quartz Fiber Filters-25/box (Pallflex 8.26cm)

GF-4Q 4 inch Quartz Fiber Filters-25/box (Pallflex 11 cm)

GF-45Q 45mm Quartz Fiber Filter-100/box

GF-47Q 47mm Quartz Fiber Filter-25/box

GF-54Q 54mm Quartz Fiber Filters-25/box (Pallflex 54mm)

GF-63Q 63.5mm Quartz Fiber Filters-25/box (Pallflex 63.5mm)

GF-3QR 3 inch Quartz Fiber Filters-100/box (MFS QR100 82mm)

GF-4QR 4 inch Quartz Fiber Filters-100/box (MFS QR100 110mm)

GF-47QR 47mm Quartz Fiber Filters-100/box (MFS QR100 47mm)

GF-90QR 90mm Quartz Fiber Filters-100/box (MFS QR100 90mm)

GLASS FIBER FILTERSGlass Fiber Filters are most commonly used filters for particulate sampling. All of the glass fiber filters are binder free and exhibit at least 99.9% efficiency for 0.3 micron dioctyl phthalate (DOP) smoke particles. Not recommended for metals analysis.

Grade E FIBER FILTERSIdeally suited for suspended solids analysis and high volume air monitoring applications. Softening point of glass fiber is 500°C, therefore upper limit temperature in use is 475°C. Low fiber shedding improves quality assurance of test results. High loading capacity. This media meets requirements for standard method 2540D and EPA Method 160.2 for establishing water quality in suspended solids content.

934-AH® FIBER FILTERSIdeally suited for suspended solids analysis. Temperature usage up to 550°C. Low fiber shedding improves quality assurance of test results. High loading capacity. This media is specified in standard method 2540D and EPA Method 160.2 for establishing water quality in suspended solids content. Widely used in air pollution monitoring. Also used in Cell harvesting and Liquid scintillation counting.

Model description

GF-2 2 inch Glass Fiber Filters-100/box (Whatman 934AH-5.5cm)

GF-2X6.5 2x6.5 inch Glass Fiber Filters-100/box (Whatman 934AH)

GF-3 3 inch Glass Fiber Filters-100/box (Whatman 934AH-8.26cm)

GF-4 4 inch Glass Fiber Filters-100/box (Whatman 934-AH-11cm)

GF-45 45mm Glass Fiber Filters-100/box (Whatman 934-AH-45mm)

GF-47 47mm Glass Fiber Filters-100/box(Whatman 934AH-4.7cm)

GF-63 63.5mm Glass Fiber Filters-100/box (Whatman 934-AH-63.5mm)

GF-90 90mm Glass Fiber Filters-100/Box (Whatman 934AH-9.0cm)

GF-2E 2 inch Glass Fiber Filters-100/box same specifications as the (Whatman 934AH-55mm) Grade E

GF-3E 3 inch Glass Fiber Filters-100/box same specifications as the (Whatman 934AH-8.26cm) Grade E

GF-4E 4 inch Glass Fiber Filters-100/box same specifications as the (Whatman 934AH-110mm) Grade E

GF-25E 25mm Glass Fiber Filters-100/box same specifications as the (Whatman 934AH-25mm) Grade E

GF-47E 47mm Glass Fiber Filters-100/box same specifications as the (Whatman 934AH-47mm) Grade E

GLASS FIBER FILTERS

DGM-AP25 Meter, Dry Gas, AP25 W/Union


ACCESSORIES

IN-STACK THIMBLES AND ACCESSORIES Apex Instruments stocks a variety of Fiber Thimbles for in-stack particulate sampling. The thimbles are seamless, high purity filters and available from a choice of two different types of fibers: Borosilicate glass and quartz. Borosilicate glass fiber thimbles are acid washed to reduce the trace metal content to an absolute minimum. Quartz fiber thimbles are strengthened with alumina and are prefired at 900°C for 2 hours during manufacturing to stabilize the weight prior to use. The gas collection efficiency of the thimbles is 99.9% (0.3 micron DOP). The 25 x 90mm thimbles are specifically manufactured for stack sampling and tapered for ease in loading. Cellulose thimbles are available upon request.

ALUNDUM® THIMBLES (CERAMIC)Alundum® Thimbles are used for in-stack filtration for process engineering studies when a large sample is needed for analyses. These thimbles are made from fused alumina oxide and remain very constant in weight and can be re-used an infinite number of times. There are two different porosity thimbles that can be used in the SFA-300 thimble holder. The medium porosity retain par-ticles 5 micron and larger and the coarse retain particles 20 micron and larger.

PTFE COATED GLASS FIBER FILTERS PTFE Coated Glass Fiber Filters are constructed from borosilicate microfibers and bonded with PTFE. The filters can be folded and handled without loss of fibers. Great for especially low loading rates. Specifically recommended for Method 26 and PM10 sampling.

Product description

GF-2T 2 inch PTFE Coated Glass Fiber Filters-100/box

GF-3T 3 inch PTFE Coated Glass Fiber Filters-100/box (Pallflex 82.6mm)

GF-4T 4 inch PTFE Coated Glass Fiber Filters-100/box (Pallflex 11cm)

GF-25T 25mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 2.5 cm)

GF-47T 47mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 4.7cm)

GF-90T 90mm PTFE Coated Glass Fiber Filters-100/box (Pallflex 90mm)

PTFE FILTER MEMBRANESPTFE Filter Membranes are produced of pure PTFE resins. They withstand the most severely corrosive conditions at temperatures as high as 500°F (260°C) and down to the cryogenic range. The membrane is hydrophobic and maintains its strength wet or dry.

Model description

TF1121 PTFE Membrane, 47mm, 0.45 Micron (10/pack)

TF1131 PTFE Membrane, 47mm, 1-2 Micron (10/pack)

TF1141 PTFE Membrane, 47mm, 5-6 Micron (10/pack)

TF1165 PTFE Membrane, 25mm, 30-60 Micron (10/Pack)

GF-3TM 3 inch PTFE Membrane Filters-50/box (Pallflex 82.6mm) PTFE filter media provides durability for hostile acid aerosol monitoring. 1.0µm pore size membrane.

PTFE FILTER MEMBRANES

Product description

GF-3TPG 3 inch PTFE Coated Glass Fiber Filters-50/box (MFS PG60) 82mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

GF-4TPG 4" PTFE Coated Glass Fiber Filters-50/box (MFS PG60) 110mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

GF-25TPG 25mm PTFE Coated Glass Fiber Filters-100/box (MFS PG60) 25mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

GF-47TPG 47mm PTFE Coated Glass Fiber Filters-100/box (MFS PG60) 47mm-Hydrophobic, Low absorption of acid gases such as SOX or NOX.

Model description

GF-190Q 19X90mm Quartz Fiber Filter Thimble-25/box (For SFA-190)

GF-300Q 30x100mm Quartz Fiber Filter Thimble-25/box (For SFA-300) grade 88R

GF-2590Q 25x90mm Tapered Quartz Fiber Thimble-10/box (For SFA-2590) Grade 88R

QUARTZ FIBER THIMBLES

Model description

GF-300C Alundum Thimble, Medium porosity, 5+ micron retention, 34x100ml, round bottom, fits SFA-300 use with additional O-ring, O-123V.

GF-300-C Alundum Thimble, Coarse porosity, 20 micron retention, 34x100ml, round bottom, fits SFA-300 use with additional O-ring, O-123V.

gF-300C

gF-2590Q

Model description

GF-190 19x90mm Glass Fiber Filter Thimble-25/box (For SFA-190)

GF-2590 25x90mm Tapered Glass Fiber Thimble -10/box (For SFA-2590) Grade 86R

GF-300 30x100mm Glass Fiber Filter Thimble-25/box (For SFA-300)Grade 86R

GLASS FIBER FILTER THIMBLES


ACCESSORIES

PbX-S

Modular Probe brush Set The PBX-S Modular Probe Brush Set contains two of the 5/8” stainless steel twisted wire brushes with nylon bristles and a total of 13’ in stainless steel extensions.PbX-S

PTFE Probe brush Extensions The flexible PTFE Probe Brush Extension attaches to the PBT-5/8 or PB-5/8. Made with 8/32 threads with a phenolic knob. Please specify length.

PTFE Probe brushAll PTFE construction. The PBT-5/8” diameter with four spiral rows of black TFE bristles. Over all length is 2”. The shaft is 1/4” diameter with 8-32 female threads. TFE Barrel and TFE Bristles.PbT-5/8

SAMPLE RECOVERY

NOzzLE bRUSHES Apex Instruments Nozzle Brushes feature stainless steel handle and nylon bristles. Super flexible for cleaning button hook nozzles with eye tip to reduce scarring of the nozzle.

PbT-5/8

Nb-SET

B-3B-1

B-4B-2

Model description

PB- 5/8 Probe Brush/Plain, Nylon

PBX-2 2’ Probe Brush Extension, Stainless Steel

PBX-3 3’ Probe Brush Extension, Stainless Steel

PBK-832 Probe Brush Knob

NOzzLE bRUSH SET The NB-SET Nozzle Brush Set includes one each of the three most popular sizes in a convenient carrying tube. (#3,#5,#8)Nb-SET

Impinger Bottle Brush with Plastic Handle and Nylon Bristles.b-1

Impinger bottle brush

Flask Brush, Stainless Steel Handle and Nylon Bristles.b-2

Flask brush

Filter Brush, 3/16” diameter, Stainless Steel Handle and Nylon Bristles, 5/16”.b-3

Filter Recovery brush

Rubber Policeman with 18” Delrin® Handleb-4

Policeman

Model description

PBX-4T 4” PTFE Probe Brush Extension





250ML-CYL-PMP

Aluminum Weighing dishes (70 ml)100/pack.25433-062

SAMPLE RECOVERY ACCESSORIES

Aluminum Weighing dishes 100 Pack (12.1 cm) 12175-001

Petri dish 100x15mm (3” Diameter),25/pack. 25373-1100

Petri dish 150x15mm (4” Diameter), 10/pack25373-187

graduated Cylinder 250ml, Plastic250ML-CYL-PMP

graduated Cylinder 250ml, Glass250ML-CYL

TW-1

Nylon TweezersTW-1

Polypropylene FunnelTop Diameter 108mm.

30255

Funnel Parafilm M, Laboratory Sealing Film, Roll is 2” x 250 ft.PARA-2X250

Synthetic Cotton Balls (For Impinger Outlet Filter), 300/bagMS-1

Cotton balls

brush Sold Separately

PTFE NOzzLE bRUSHES Nozzle Brush NBT-1/2 is constructed of pure PTFE featuring a 1/8” diameter shaft with 1/2” long soft PTFE bristles. NbT-1/2

NbT-1/2Model description

NB-3 3/16” diameter, Nylon Bristles



PbX- T

Nb-5

Nb-8Nb-3

20 ft.Teflon Sample Line Brush, 1/8” diameter rod with 1/2” long bristles b-5

Sample Line brush


ACCESSORIES

PFA

Fittings:

T501-8-2 PFA Impinger Cap, Two 1/2” Tube Fittings

T55 PFA Impinger Wrench Set

NTG-10U2 5/8” Glass Filled PFA Union with 1/8” FNPT Tap (for Nozzle Recirculation)

NTG-10F 5/8” Glass-Filled PFA Single Ferrule

NTG-10F-DZ 5/8” Glass-Filled PFA Single Ferrule (Dozen)

4MSEL2N-PFA PFA Male Elbow,1/4” Tube Union to 1/8”

8-4-10ET-T PFA Jump Tee (1/4”, 1/2”, 5/8” Tube Unions) with Nylon Nuts and TFE Ferrules

10-4-8ET-T Alternate PFA Jump Tee (1/4”, 1/2”, 5/8” Tube Union) with Nylon Nuts and TFE Ferrules

4MSC2N-PFA PFA Union, 1/4” Tube Union to 1/8” MNPT

8-4-8ET-PFA Recirculation Run Tee,1/4”, 1/2”, 1/4” PFA Tube Unions,1/4” Tube Union Bore through Recirculation Line

Used in Method 26 for HCI emissions. TFA-25 High Temperature PFA clamp nuts are standard. 1/4” tube fittings. TFA-47 Standard with 1/4” tube unions. Also available with 1/4” male pipe fittings or 3/8” tube fittings.

TFA-25

TFA-47

PFA Filter Assemblies:

TFA-25 PFA 25mm Filter Assembly, 1/4” Tube Fittings

TFA-25B 25mm PFA Filter Replace Body Only with 1/4” TU, No Clamp

TFA-47 PFA 47mm Filter Assembly, 1/4” Tube Fittings

TFA-47-6 PFA 47mm Filter Assembly, 3/8” Tube Fittings

TFA-47-6T PFA 47mm Filter Assembly, 3/8” Tube Stubs

Segmented PFA Column & Accessories:

T501 PFA Column End Cap, Solid

T501-4 PFA Column End Cap with 1/4” Tube Fitting

T501-4-2 PFA Column End Cap with two 1/4” Tube Fittings

T501-6 PFA Column End Cap with 3/8” Tube Fitting

T501-6-2 PFA Column End Cap with two 3/8” Tube Fittings

T502 PFA Column Connector

T504 PFA Column Segment

T504-4 PFA Column Segment with 1/4” ube Fitting

T504-6 PFA Column Segment with 3/8” Tube Fitting

T504-47 PFA Column Segment - Adapts to 47mm Filter Holder

T504S PFA Screen, Separator slides into T504

T570 PFA Column Segmnet, Solid Bottom

T504-6 Column Segment with Fitting

T504 Column Segment

T501-4 One Port Column End Cap

T501 Column End Cap

T502Column

Connector

T570 Column Segment with Solid bottom

T501-4-2 Two Port Column End Cap

T504-4

grooved Vessel

T507G Impinger Single Piece Body, 375ml

PFA L-Stems:

T507-3 L-Stem, 1/2” FEP, Full Length

T507-3R L-Stem, 1/2” FEP, Restricted Tip

T507-5 L-Tube Outlet, 1/2” FEP, Short Ends

PFA U-Stems:

T507-1 U-Stem, 1/2” FEP, Plain Tip

T507-1R U-Stem, 1/2” FEP, Restricted Tip

PFA Straight Stems:

T507-2 Straight Stem, 1/2” FEP, Full Length

T507-2R Straight Stem, 1/2” FEP, Restricted

T507-6 Straight Tube Outlet, Short End

T5072

Hexavalent Chromium PFA Impinger Trains

PFA COLUMN COMPONENTS

Features: • Unbreakable • Leak Tight without Sealants • Grooved for Heat Transfer • Adaptable for Adding Recirculation Fittings • Quick Connections with Preformed Tube Bends

PFA Column Components are PFA fluorocarbon resin and inert to virtually all chemicals. All are usable for a wide variety of temperature ranges from below 32°F to 500°F (0 to 260°C). The individual components can be assembled for a variety of uses. Components can be purchased separately and assemble according to project specifications.

VgC-12

Although used primarily as SO2 scrubbers for U.S. EPA Method 16A, determination of total reduced sulfur emissions from stationary sources, the T507g Impinger can be used in other procedures such as Methods 5 and 6 (hexavalent chrome).

PFA Impingers, Stems and Fittings

PFA Impingers and Accessories PFA Filter Assemblies


ACCESSORIES

SAMPLE RECOVERY BOTTLES

GSB-250

WB-5P

POLYETHYLENE SAMPLE bOTTLES 125 mL w/Wide Mouth, w/Cap.WB-1W250 mL w/Cap.WB-2p250 mL w/Wide Mouth.WB-2pW 16oz. / 500 mL w/Wide Mouth.WB-4p1000 mL w/Wide Mouth.WB-10p1000 mL w/Wide Mouth.WB-1000pW

Model description

GSB-1000 Sample Bottles, Glass, 1000 mL, Case of 12

GSB-1000A Sample Bottles, Amber, 1000 mL, Case of 12

GSB-1000L Sample Bottles, Clear Glass, 1000 mL,

GSB-1000P Sample Bottles, HDPE, 1000 mL, Case of 12

GSB-1000SC Sample Bottles, Clear Glass, 1000 mL

GSB-1000SCA Sample Bottles, Clear Glass, 1000 mL, GL-45, Thread, w/Safety Coat (includes GA-GL-45B and GA-GL-45S)




GSB-250C Sample Bottles, HDPE, 250 mL, Case of 12




GSB-500P Sample Bottles, HDPE, 500 mL, Case of 12


GSB-500U Sample Bottles, Clear Glass, U-Shape, 500 mL, GL-45 Thread

WB-4P

FEP WASH bOTTLE500mL Wash Bottles, FEP.WB-500Fep

Wide Mouth Bottles for Easy Filling and Pouring. The HDPE bottle with polypro-pylene closures are made of FDA compli-ant material. Recycling code molded into base of bottles. Simple to pour-wide mouth bottles. Chemically resistant. Leak proof, firm. Excellent for packaging chemicals, pharmaceuticals and adhe-sives. Available Sizes. 250ml and 500ml.

WB-2p/with cap250ml

Wp-4B/with cap500ml

WB-500FEP

PLASTIC WASH bOTTLE500mL Plastic Wash BottlesWB-5p

gLASS bOTTLES250mL Glass Sample Bottles with PFA-Lined Lid.Case of 12.gSB-250


ACCESSORIES

BALANCES

MOdEL dESCRIPTION

BAL-EJ1500 1500g x 0.1 g.

BAL-EJ3000 3100g x 0.1 g.

BAL-EJ6100 6100g x 0.1 g.

BAL-EJ02 USB Interface with Cable

BAL-EJ12 Carrying Case

EJ-SERIES• Easy to read LCD Display with Backlight

• Percentage and Counting

• USB or RS-232 Interface Optional

• Battery Operated (4 x AA not included)

• AC Adapter Included

• Pan Size: 5” x 5.5”

• Check-Weighing Capacity

• 5 Year Warranty

PORTAbLE bALANCES

MOdEL dESCRIPTION WEIgHT

BAL-W1000ASTM Weight for Electronic Balance. 1 kg. ASTM GRADE 7

BAL-W2000ASTM Weight for Electronic Balance. 2 kg. ASTM SHAPE

BAL-W5000ASTM Weight for Electronic Balance. 5 kg. Class F, Meet Tolerances of NIST (Comes with case)

ELECTRONIC bALANCE - CALIbRATION WEIgHT

comES with cErtificatE of conformancE


ACCESSORIES

BALANCES

MOdEL dESCRIPTION PAN SIzE

BAL-HR60-C 60g x 0.1mg with RS-232C. 3.3”



BAL-HR202i 220g/51g x 0.1mg/0.01mg Semi-Micro with R-232C. 3.6”

HR-SERIES• Percentage and Counting Modes.

• Digital Preset Tare.

• One Touch Printing.

• Last Digital Suppression.

• Standard Underhook.

• Optional Rechargeable Battery Pack.

• GLP/LIMS/ISO Compliant.

• RS-232C Standard.

• 5 Year Warranty.

ANALYTICAL bALANCES


ACCESSORIES

DESICCATOR AND DESICCANTS Acrylic Desiccator Cabinets feature adjustable shelves with grooves for positioning, removeable lip tray, gasketed door, built-in hygrometer. Cabinets do not include Desiccant, order separately.

31000

Model description dimensions Features

DES-10000 Desiccator Cabinet 8.4” x 13.4” x 16.3” Gasketed door, built in hygrometer, 0.75 cu.ft.

DES-21000 Desiccator Cabinet 12.4” x 13.4” x 16.3”, 2 shelves, gasketed door, built in hygrometer 1.17 cu.ft.

DES-21115 Auto-Desiccator Cabinet

12.4” x 13.4” x 16.3” 2 shelves, gasketed door, built in hygrometer 1.17 cu.ft. 110V

DES-21115V Auto-Desiccator Cabinet

12.4” x 13.4” x 16.3”, 2 shelves, gasketed door, built in hygrometer 220V fan, 1.17 cu.ft.

DES-31000 Desiccator Cabinet 16.4” x 13.4” x 16.3”, 3 shelves, gasketed door, built in hygrometer stackable


16.4” x 13.4” x 16.3”, 3 shelves, gasketed door, built in hygrometer stackable, 110V

DES-31115V Auto-Desiccator Cabinet

16.4” x 13.4” x 16.3”, 3 shelves, gasketed door, built in hygrometer 220V fan

DES-40000 Desiccator Cabinet 13.4” x 20.4” x 16.3”, 2 shelves, gasketed door, horizontal Profile


20.4” x 13.4” x 16.3” 3 shelves, gasketed door, built in hygrometer


20.4” x 13.4” x 16.3”, 3 shelves, gasketed door, built in hygrometer, 220V fan

www.belart.com

Features• Patented Sealed Construction is Airtight, Dust and Moisture Free.• Portable and Stackable with a Small Footprint.

PORTABLE DESI-VAC CONTAINER Desiccator with a vacuum pump is ideal for drying, preserving, storing, and even shipping samples. Vacuum pump built into the top removes air with manual strokes. Rubber O-ring sealed cover maintains vacuum. Achieves a vacuum of better than 200 inches of water (15 inches of mercury). A release button on top allows air into the container to remove the lid. Sample Humidity Sponges™ desiccant drying packets are included. O-ring-sealed cover maintains vacuum. Achieves a vacuum of better than 200 inches of water (15 inches of mercury A release button on top allows air into the container to remove the lid. Keep powder dry. Plastic container is ideal for storing chemicals, powders, tissues, plant sections, electronics, and weighing samples. Vacuum and desiccants keep mate-rial dry. Supplied with a vacuum indicating button that confirms interior vacuum and a dial hygrometer that displays 0 to 100% relative humidity with a resolution of 2%RH.Dimensions: HxWxD: 11” x 9” x 10”.

DeS-3164DES-3164

• Embedded UV Protection and Superior Chemical Resistance.• Built-in Hygrometer for Quick Check on RH Levels.• Rugged Construction with Sturdy Latches and Lock Provisions.


ACCESSORIES

Adsorption Housing, 1/4” FNPT Fittings

SILICA GELBlue Indicating, 12/case, 250 ml per bottle.

Sg-KiTSG-KIT

Apex Instruments Silica Gel is primarily used for drying sample gas prior to measurement and can absorb moisture 40% of its weight. The silica gel can be regenerated by drying in an oven and used over and over again.

SILICA GEL

SILICA GEL3-5mm Bead, Indicating, 2.3Kg.

Sg-3/5B

24005 14005

Part Number description

14005 DRIERITE®, Nonindicating 10-20 Mesh, 5 Lbs. (2.3 kg)

23005 DRIERITE®, Indicating 8 Mesh, 5 Lbs. (2.3 kg)

24005 DRIERITE®, Indicating 10-20 Mesh, 5 Lbs. (2.3 kg)

26840 DRIERITE®, Cartridge, 50g H2O Capacity

26809 Mounting Clip for Use with Gas Drying Units

SG-3/5B

The activated alumina is primarily used for air drying at low temperature applications, 5.5 lb. container.

80% Activated Alumina (White). 1/8” Diameter Beads.

20% Silica Gel (Blue) 3-5 mm Beads.

aluma-sorb

ACTIVATED ALUMINA WITH SILICA GEL

Aluma-sorb

SILICA GEL3-5 mm Bead, Bulk55 LbS, CONTAINER.

Sg-3/5B-55

AH-610R

DRIERITE® DESICCANTSApex Instruments carries both non indicating and indicating DRIERITE®. (anhydrous calcium sulfate) Economical to use, it can be regenerated repeatedly. The indicating DRIERITE® is impregnated with cobalt chloride: blue when dry and changes to pink upon absorption of moisture.

SG-3/5B-55

ah-610r


ACCESSORIES

Product description

PF-346T32S 2” FNPT Universal Pipe Flange Reducer, Fits 3”, 4”, 6” Ports, Stainless Steel

PF-346XT32S 2” FNPT, Universal Pipe Flange Reducer with 12” Extension, Reversible, Fits 3”, 4”, 6” Ports

PF-346T32S 2” FNPT Universal Pipe Flange Reducer, Fits 3”, 4”, 6” Pipe Flanges, Stainless Steel

PF-4/6U32-S Universal Pipe Flange with 2” FNPT Welded in Center, Fits 4” and 6” Ports.

PF-4/6UB-S Universal Pipe Flange, 4”/ 6” Port, 2.675 Bored Center, Stainless Steel

PF-4/6UCLS Universal Flange, 4”/ 6” w/ 2-1/2” Cam-Lock.

UNIVERSAL PIPE FLANgE & FLANgE REdUCERS

cam-locK, FlangeS, porT aDapTerS & pacKing glanDS

Flange & Cam-Locks

Threaded Pipe Flanges

Product description

PF-3/40CLS 3” Bored Pipe Flange, 150 lb pattern, 2.670 Bored Diameter, with size 40 Cam-lock Connector, Stainless Steel

PF-3BS 3” Pipe Flange, 150 lb FF Pattern, 2.67 Bored Diameter, Stainless Steel

PF-3CS 3” Pipe Flange, 150 lb FF Pattern, 2.67 Bored with Threaded Coupling, Stainless Steel

PF-4BS 4” Bored Pipe Flange, 2.67” RF, 150 lb Pattern, Stainless Steel

PF-6BS 6” Bored Pipe Flange, 150 lb Pattern, 2.670 Bored Diameter, Stainless Steel

PF-4CLS 4” Bored Pipe Flange, 2.67” RF, 150 lb Pattern, Stainless Steel,

PF-4CS 4” Bored Pipe Flange, 150 lb FF Pattern with Threaded Coupling, Stainless Steel,

PF-4/40CLS 4” Bored Pipe Flange, 150 lb pattern, 2.67 Bored Diameter Welded Cam and Groove Connector (For Probes without Pitot Option, with Tube Outer Sheath) with 40” Cam-Lock Connections, Stainless Steel

PF-6/40CLS 6” Bored Pipe Flange, 150 lb pattern, 2.67 Bored Diameter welded Cam and Groove Connector (For Probes without Pitot Option, with Tube Outer Sheath) with 40” Cam-Lock Connections, Stainless Steel

PF-6/48CLS 6” Bored Pipe Flange, 150 lb Pattern, Bored Inside Diameter, with size 48 Cam-lock Connector (For Use with Pitot Version Mercury Probe with Pipe Oversheath),Stainless Steel

PF-6CLS 6” Bored Pipe Flange, 150 lb pattern, 2.670 Bored Diameter, with Cam-lock Connector, Stainless Steel

bOREd PIPE FLANgE

Product description

PF-4BLS 4” Pipe Flange, 150 lb Pattern, Blind, RF, Raised Face, Stainless Steel.

PF-6BLS 6” Blind Pipe Flange, 150 lb Pattern, Stainless Steel

PF-3T16S 3” Blind Pipe Flange with 1” FNPT, 304, Stainless Steel

PF-3BLS 3” Pipe Flange, 150 lb RF, Blind, Raised Face,Stainless Steel

PF-4S 4” ANSI Blind Pipe Flange, 150 lb Pattern, Stainless Steel

bLINd PIPE FLANgES

Product description

PF-2T 2” Threaded 304 Flange

PF-3T 3” ANSI Threaded Pipe Flange, 150 lb Pattern, 7.5” OD,Carbon Steel

PF-3T16 3” Threaded Pipe Flange, 150 lb Pattern, Carbon Steel

PF-3TA 3” FNPT Threaded Pipe Flange, 150 lb Pattern, Cast Aluminum.

PF-4T16 4 inch Threaded Pipe Flange, 150 lb Pattern, 1-inch FNPT, Carbon Steel

PF-4PG38S 2” ANSI Pipe Flange, 150 lb Pattern, with 2” Pipe Packing Gland, Stainless Steel

PF-4/32NS 4” ANSI Pipe Flange, 150 lb Pattern, 2.67 Bored Diameter, 2” Female NPT Welded Fitting

PF-4T 4” ANSI Threaded Pipe Flange, 150 lb Pattern, 9” OD,Carbon Steel

PF-6T 6” ANSI Threaded Pipe Flange, 150 lb Pattern, 11” OD, Carbon Steel

PF-6PG38S 6” ANSI Pipe Flange, 150 lb Pattern, with 2” Pipe Packing Gland, Stainless Steel

PF-4TS 4” FNPT Threaded Pipe Flange, 150 lb Pattern, Stainless Steel.

PF-6TS 150 lb FF, 6 FNPT Flange, Threaded, Stainless Steel

THREAdEd PIPE FLANgES

Product description

PF-4PG38S 4” Pipe Flange, 150 lb Pattern with 2” Pipe Packing Gland (For Use with Probes with Pitot Option, Pipe Outersheath), Stainless Steel

PF-346S Flange Plate with 2-3/8” Hole for 2” Pipe. Fits 3”, 4” & 6” Ports, Stainless Steel

PF-46XT32S 2” FNPT Probe Support with Extension

PIPE FLANgE

Product description

PFC-2.5S 2.5” Probe Flange Cap Assembly, Consists of 304 Stainless Steel Bevel Seat Cap and Nut.

PFC-2S 2” Probe Flange Cap Assembly, Consists of 304 Stainless Steel Bevel Seat Cap and Nut.

PRObE FLANgE CAP


ACCESSORIES

Product description

PF-346PG38 Packing Gland Flange Fits 3”, 4”, 6”, Includes Packing Gland for 2” Pipe, Stainless Steel

PACKINg gLANd FLANgE

bored bushings Reducing bushings

Product description

64M/32F-CS Reducing Bushing, 4” MNPT-2” FNPT, Carbon Steel

48M/32F-CS Reducing Bushing, 3” MNPT-2” FNPT, Carbon Steel

32M/16F-B Reducing Bushing, 2” MNPT-1” FNPT, Brass

32M/24F-B Reducing Bushing, 2” MNPT-1.5” FNP, Brass

REdUCINg bUSHINgS

Product description

32M/16B-B Bored Bushing, 2” MNPT X 1.035” Bore, Brass



bOREd bUSHINgS

Packing glands

Cam-LockPacking glands

OversheathPacking glands

PF-4/6UCLS

Pg-32/40CL

PF-4/40CLS PF-6/40CLS

Product description

PG-24T 1-1/2 inch Oversheath Packing Gland, Steel Body, 1-1/2 inch MNPT, TFE Packing.

PG-32S 2” Oversheath Packing Gland, Steel Body, 2” MNPT, PTFE Ferrule included

PG-32/40CL 2” Oversheath Packing Gland, Steel Body, TFE Packing (for use with PF-40CLS flange) with Cam and Groove Connector

PG-38/48CL 3” Oversheath Packing Gland, Stainless Steel body, Cam-Lock, For use with Pitot Version Mercury Probes with Pipe Oversheath

OVERSHEATH PACKINg gLANdS

PACKINg gLANd ACCESSORIES

Product description

PG-32F 2” Adapter, Threaded Bevel Seat, #21-2, Custom Bore, 2.125” ID, Used in PG-32S, Stainless Steel, Note: Does Not Include Nut or Ferrule

PG-32NT 2” Adapter, Bevel Seat, #21-2, Custom Bore, 2.125” ID, Used in PG-32S, Stainless Steel, Note: Does Not Include Nut or Ferrule

PG-38F 2.5” Custom Threaded Ferrule, Part of PG-38-3Q Packing Gland, Stainless Steel

PG-38RT Thrust Ring, 2.435 ID X 2.875 OD, for PG-38-3Q Packing Gland, Stainless Steel

PG10-4N Pressure Gauge, 0-15 psi, 1/4” NPT, Stainless Steel

PG200-4N Pressure Gauge, 1/4” NPT

PACKINg gLANdS FOR PITOTS

Product description

12MTC12-B 3/4” Packing Gland for Pitot with 3/4” Oversheath, Includes Nylon and Brass Ferrules, Brass

12MTC12-S 3/4” Packing Gland for Pitot with 3/4” Oversheath, Includes Nylon and Ferrules, Stainless Steel

16MTC16-B 1” Packing Gland for Pitot with 1” Oversheath, Includes Nylon and Brass Ferrules, Brass

16MTC16-S 1” Packing Gland for Pitot with 1” Oversheath, Includes Nylon and Ferrules, Stainless Steel

16MTC16-SF 1” Packing Gland for Pitot with 1” Oversheath, includes Nylon and Ferrules, Stainless Steel, and 16MTC16-S

12F-GR 3/4” Graphite Ferrule, alternative packing for 16MTC16

16F-GR 1” Graphite Ferrule, alternative packing for 16MTC16

360 dEgREE COMPASS ROSE FLANgE

Product description

PF-346T32A360 Flange with 360 Degree (0-90 Degree X 4) Compass Rose Laser Engraved. 2” Half Coupling Welded. Fits 3”, 4” and 6” Flanges. Includes Arrow Pointer for 2” Oversheath Probe, Stainless Steel

PF-346XT32S360 Flange with 360 Degree (0-90 Degree X 4) Compass Rose Laser Engraved. 2” Half Coupling Welded. Fits 3”, 4” and 6” Flanges. Includes Arrow Pointer for 2” Oversheath Probe. With Bored Bushings and 2” Diameter Probe Support Extension, Stainless Steel

Product description

PFC-40S-CL 2.5” NPT 316 with Buckles, Cap Cam with Groove Fitting, Type D, 2.5 inch MNPT, Stainless Steel

PIPE FLANgE ACCESSORIES

Product description

64RUC32-CS Coupling, reducer, 4” x 2” FNPT, Carbon Steel

48RUC32-CS Coupling, reducer, 3” x 2” FNPT, Carbon Steel

REdUCINg COUPLINgS

Reducing Couplings


ACCESSORIES

METER CALIBRATION

CALIBRATION SERVICESApex performs both calibrations using a wet test meter and bell-prover primary standard. Calibration services are available from Apex Instruments on a fee per console basis. Extra charge for low flow. All console and dry gas meter calibrations are conducted in accordance with U.S. EPA standards. Apex Instruments calibrates source sampler consoles, reference dry gas meters, orifices and pitots.

Calibration being performed with Wet Test Meter

DRY GAS SECONDARY REFERENCE METER (ENGLISH)Dry Gas Meter Secondary Reference Meter (Standard) with 15 pt cal, valve, 5’ hose, 1/2” Quick Connect. Used for calibrating Method 5 Source Sampler Consoles.

Dgm-110Sr

SECONDARY REFERENCE METER (METRIC)Dry Gas Meters Secondary Reference Meter (Metric AP25) with 15 pt cal, valve, 5’ hose, 1/2” Quick Connect.Used for calibrating Method 5 Source Sampler Consoles.

Dgm-ap25Sr

METER CALIBRATION EQUIPMENT

Model Description

DGR-2VER Verification of DGM for Secondary Reference, 2 Point Verification of Previous Calibration

DGMC-5A Pre-Test 5 Point Calibration for Compatible Meter Consoles

DGMC-3A Post Test 3 Point Calibration for Meter Consoles

CAL-ORF Orifice Calibration, 3 Point

DRY GAS METER CALIBRATION SERVICES

dgM-110SR dgM-AP25SR


ACCESSORIES

dIAL CALIPERS

Geometric of Type-S Pitot Tube to Method 2.

pT-cal-gWind Tunnel of Type-S Pitot Tube to Method 2.

pT-cal-W

PITOT CALIbRATION SERVICES

THERMOCOUPLE SIMULATOR / CALIBRATOR This Thermocouple Simulator/Calibrator is convenient for checking the accuracy of most Controllers and Temperature Displays. Whe Cold Junction Compensated, is calibrated without External Compensators or Icebaths the Simulator Source is designed for Type-K Thermocou-ples and has 22 precise test points.

m5c-520

dial Calipers are used for measuring nozzle diameter and inspection of pitots. Dial Caliper, 0-6”/ 150mm Direct inch/Metric Conversion.

m5c-3D

NOzzLE CALIbRATION

CALIBRATION EQUIPMENT AND SERVICES

M5C-520

bULL’S EYE LEVELbull’s Eye Level is 1/2” diameter and used for pitot calibrations. Comes with thumb screws for clamping to pitot.

m5c-2

M5C-2

Pendulum Style Inclinometer for the Calibration of Type-S Pitots.

inc-a300

A300 LEVEL INdICATOR

INC-A300

PITOT AUDIT EQUIPMENT & MANOMETERS

Meriam Handheld, LCD DISPDigital Manometer, Hand held, 0-28 inch H2O Selectable Range, English/Metric, with certificate of NIST traceability.

Dhm-m100

HANdHELd MANOMETER

DHM-M100

HANdHELd MANOMETER LCD DISP., Digital Manometer, Method 2, Hand held, 0-10 inch H2O Selectable Range, English/Metric.

Dhm-28-10

DHM-28-10

MANOMETER SOFTWARE Software and cable for Digital Manometer, HM28 series.

Dhm-28-1

MANOMETER dIgITAL dISPLAYDP-CALC Micromanometer makes differential pressure measurements, static, total, and velocity pressures as well as pressure drops across filters, coils, fans, and diffusers. Differential and static pressure from -15 to +15 in. H2O (-3735 to +3735 Pa) lightweight and durable design with an easy-to-read display, certificate of NIST traceability.

Dhm-5825


ACCESSORIES

oriFice FloW meTerS

The OFM-Series Orifice Flow Meters all feature a calibrated, stainless steel critical orifice with two liquid-filled vacuum gauges and stainless steel inline filter. All fittings, including the orifice and filter, are made of stainless steel and include 1/4” tube fitting end connections. These adapters are used with vacuum pumps to provide constant sample flow rates. Orifice sizes range from 4 to 35 providing flow rates from 0.076 Lpm to 6.1 Lpm.

The VUA-Series Low Flow Orifice Adapters feature a calibrated, critical sapphire orifice with liquid filled vacuum gauge, brass fittings and inline filter to adapt to Apex Instruments’ isokinetic source samplers for methods requiring low flow sampling. The adapters are used for VOST and Method 6-type sampling. Adapters include 1/2” male and 1/4” female brass quick connects to attach the isokinetic source sampler to the VOST VU-cords. Three adapters are offered to provide approximately 1/2, 1 and 2 liters per minute flow rates. The VUA-575 is used for Method 7C to provide the required flowrate between 400-500cc/min.

Apex Instruments offers the precision machined acrylic (KFR-Series), molded polycarbonate (KMR-Series), glass tube (Kg#-Series), and electronic flowmeters for a variety of applications. Available in precision engineered sizes and scales for a variety of fluids. The millimeter reference or direct read scales can be specified to meet any requirements. NIST traceable calibration certificates are available.

Product description

KFR-4A40SNVT Acyrlic, 0.4-5 Lpm, stainless steel, no valve

KFR-4A44SNVT Acyrlic, 4-50 Lpm, stainless steel, no valve

KMR-3A13SVVT Polycarbonate, 0.1-1.2 Lpm, Stainless Steel, with Valve

KMR-3A23SVVT Polycarbonate, 0.2-2.5 Lpm, Stainless Steel, with Valve

KMR-3A14SVVT Polycarbonate, 0.4-5 Lpm, Stainless Steel, with Valve

KGS-SERIES Glass Tube, Rotating Lens, MM Scales or Direct Read Index

KGR-SERIES Glass Tube, standard lens, MM Scales or Direct Read Index

FLOW METERS

KFR-Series - KMR-Series - Kg#-Series

OFM-SERIES ORIFICE FLOW METERS

Product description

OFM-K4-14 Orifice Control Flowmeter, In-Line, w/2 liquid Filled Vaccum Gauges, Stainless Steel In-Line Filter & KA-14-SS Orifice, 1Lpm

OFM-K4-4 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-4-SS Orifice, .076LPM

OFM-K4-6 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-6-SS Orifice, .20 lpm


OFM-K4-8 Orifice Control Flowmeter, In-Line, w/2 Vacuum Gauges, Stainless Steel In-Line Filter & K4-8-SS Orifice, .34lpm


OFM-K4-HG Calibration Orifice, In-Line, w/ Vacuum Gauge, Stainless Steel In-Line Filter & Orifice, low flow for mercury system

other flow ranges available. caLL for DEtaiLS & PricinG.

OFM-SERIES ORIFICE FLOW METERS

VUA-SERIES LOW FLOW AdAPTERS

Product description

VUA-561 Low-flow Adapter for Isokinetic Meter Console, ~1Lpm, 1/2” male 1/4” female quick connect, brass

VUA-562 Low-flow Adapter for Isokinetic Meter Console, ~2Lpm, 1/2” male 1/4” female quick connect, brass

VUA-565 Low-flow Adapter for Isokinetic Meter Console, ~0.5 Lpm, 1/2” male-1/4” female quick connect, brass

VUA-575 Low-flow Adapter (M7C) for Isokinetic Meter Console, ~0.5Lpm, 1/2” male-1/2” female quick connect, brass

VUA-SERIES LOW FLOW AdAPTERS

other flow ranges available. caLL for DEtaiLS & PricinG.

FloW meTerS (roTameTerS)

gas analysis equipment apex pro-series heated sample...

Documents