gas boosters and air blowers
TRANSCRIPT
Model U2000A
Gas Boosters and Air BlowersThese centrifugal gas boosters and air blowers are of robust construction and designed to run continuously under full load conditions handling a wide variety of gases or air. The shaft is sealed to isolate the bearings.
Machines have a cast iron bearing housing, with aluminium volute casing and stainless steel anti-surge impeller.
Boosters can be supplied bareshaft, as a basic unit with baseplate and motor, or as a package with mechanical and electrical protection equipment fitted and wired, to comply with IGEM/UP/2 and/or customers bespoke requirements.
All options are available as multiple sets for standby or assist operation, and packaged with approved controls. Compliant to : IGEM / UP / 2 ATEX DIRECTIVE : 2014 / 34 / EU MACHINERY DIRECTIVE : 2006 / 42 / EC
BSEN 8487 : 2007
Ancillary Equipment:• Pressure switches • Isolating valves • Flexible connectors• Non-return valves • Acoustic/weatherproof enclosures• Motors and ancillaries for zoned areas • Control panel, Inverter control• Filter silencer for blowers/exhausters
Air Blowers:Aeration Burners
Gas Boosters:BurnersGas EnginesWaste Gas BurnersSiloxane & H2S Filters
PRES
SURE
RIS
E - M
BAR
Whilst the details contained in this leaflet are representative of the machines, the actual products may differ from the illustrations due to improvements in design or change in specification. Certified drawings and performance curves will be supplied on request.
The Utile Engineering Co. Ltd. Irthlingborough, Northamptonshire. NN9 5UG. EnglandTel: +44 (0)1933 650216 Fax: +44 (0)1933 652738 E-mail: [email protected] www.utileengineering.com
MODEL U2000 (NAT GAS SG=0.6) MODEL U2000 (BIO GAS SG=0.8)
Dimensions & Performances
Materials of Construction
Outlet OrientationsPR
ESSU
RE R
ISE
- MBA
R
0 400 800 1200 1600 2000 2400
KILOWATTS
L0 Discharge
R0 Discharge
L90 Discharge
R90 Discharge
L180 Discharge
R180 Discharge
VOLUME - CUBIC METRES/HR0 2 4 6 8
100
80
60
40
20
0
100
80
60
40
20
0
Weight : 75 kgs - Bareshaft Unit
PRES
SURE
RIS
E - M
BAR
0 400 800 1200 1600 2000 2400
VOLUME - CUBIC METRES/HR
140
120
100
80
60
40
20
0
KILOWATTS0 2 4 6 8
PRES
SURE
RIS
E - M
BAR
140
120
100
80
60
40
20
0
Bearing Housing : Cast Iron
Volute Casing : Aluminium
Impeller : Welded Stainless Steel
Shaft : Stainless Steel
Seals : Radial Lip Seal & Mechanical Seal