gasifier-type firewood fuelled boilers for central heatingsanitairweb.be/catalogus stadler...
TRANSCRIPT
2
The TVT Stadler boilers are connected to the central heating system. The heating system can be installed as radiator, floor, wall or ceiling heating. The system can also be used for the heating of sanitary water.
The TVT Stadler systems are considered one of the best on the European market, as evident from the compliance with the highest standards EN 303-5/2012 and the received certification.
Despite numerous other energy sources, wood fuelled heating is still considered the most natural one and at the same time it is one of the most effective heating systems. The maximum efficiency can be achieved with the technologically sophisticated TVT Stadler heating systems. These systems consist of gasifier-type firewood fuelled boilers or traditional firewood boilers.
Stadler TVTAdvanced energy technologyfor the most effective heating of your home.
3
Why choose Stadler TVT?
• Top quality, precise and produced in accordance with top standards
• highenergyefficiency• innovative and comfortable regulation• large space for logs and herewith
infrequent loading• wide choice of models for various space
surfaces of different price categories • minimal environmental pollution• long operating lifetime
The possibility of sanitary water heating
The Stadler TVT boiler is the heart of the heating system. Together with the energy storage and sanitary water heater it heats the entire building.
The water outlet temperature is, owing to the regulation, suit-able for radiator, floor, wall or ceiling heating, as well as for sanitary water heating.
4
Family Stadler Power
The Stadler Power Boiler Family is an ideal solution for economical heating of houses or smaller business facilities up to a surface of 500 m2. These boilers are intended for the buyers whose desire is to have an economical and efficient heating system, while securing as much comfort as possible. The efficiency of the boilers is above 90% at the lowest possible emissions.
The combustion of the wood mass is carried out using the gasification technology. With controlled oxygen supply to the fuel and the combustion through the combustion nozzle into the combustion chamber, the maximum effect of wood gas combustion is achieved. Therefore, in addition to the efficiency, the comfort of operating the boiler is also increased. Together with the Stadler Power Boiler an energy storage reservoir must also be installed.
• Bestefficiencywiththelowestfluegasemissions
• Environment-friendlyfluegas• Loaded once or twice a day• An active regulation with Lambda probe
and a continuously variable control of the ventilator
• An automatic control of the primary and secondaryflap
• A possibility of ignition programming• Up to 30 % lower wood consumption• Easy to clean• A minimal amount of ashes• A long operating lifetime
The loading area for wood is surrounded by stable panels which protect it from the accumulation of tar which results in a better efficiency and a longer operating lifetime of the boiler.
Thefiringnozzle is precisely pro-duced from an alloy-chrome cast that ensures a long operating lifetime of the nozzle.
Gasifier-typefirewoodfuelledboilers for central heating
5
FamilyStadlerPowerHeat exchanger - a
system for cleaning the heat exchanger is serially installed. With manual shaking of the turbulators we achieve a better efficiency and save fuel.
The Lambda probe, the temperature sensor and the regulated motor of the ventilator allow accurate oxygen supply to the fuel. This gives us a possibility to use different varieties and different wood qualities. Low flue gas emissions even at partial power.
The combustion chamber consists of high temperature resistant and fireproof concrete. This ensures:• The lowest flue gas
emissions• A long operating
lifetime.
The automatic ignition enables a programmed ignition of fuel.
The user-friendly control of the Stadler Power devices ensures the best possible energy efficiency along with the pleasant temperature. The regulation of the Stadler Power boilers can also be done remotely using a web application over the internet.• Return temperature increase• Buffer management
5020kW
Gasifier-type firewood fuelled boilers for central heating
6
Power TR
6
The Power TR is the most powerful member of the Stadler Power family of gasifier-type firewood fuelled boilers. This boiler is suitable for the most demanding customers, since it is one of the top offers in Europe due to the quality of its construction and the comfort it offers.
• Suitable for new buildings as well as older buildings, single and multifamily houses
• Effectiveness of more than 90%, with lowest fuel gas emissions
• The volume of the heating chamber is 150 l • A separate combustion chamber • Three doors, for easy boiler operation • A possibility to open the doors to the left or
right • The air supply is controlled by two
servomotors • A possibility of automatic ignition • Boiler regulator BXD 30• The boiler body consists of 7 mm thick
boiler plate
Stadler Power TR Stadler Power LT Stadler Power GT
Model TR 20 TR 25 TR 30 TR 40 TR 50 LT 20 LT 25 / LT 30 GT 20 GT 25 GT 30Nominal Heat Value [kW] 20 25 30 40 50 15-20 25-30 20 25 30Minimal Boiler Power [kW] 10 12 15 20 25 7 15 10 12 15Boiler Efficiency at Rated Power [%] 92,6 92,6 91 90,2 90,2 90 90,7 /91,4 91,4 91,5 91,7Storage Volume [l] 150 150 150 185 185 120 120 105 105 105Width, Height of Loading Door [mm] 430 × 400 400 × 440 400 × 350Water Quantity [l] 193 193 183 225 215 117 110 132 125 125Chimney Connection [mm] 150 150 150 180 180 150 150 150 150 150Permissible Operating Pressure [bar] 3 3 3 3 3 3 3 3 3 3Demanded Chimney Pressure [Pa] 10 10 10 15 15 13 13 13 13 13Max. Pre-flow Temperature [°C] 95 95 95 95 95 95 95 95 95 95Boiler Weight [kg] 750 750 750 770 785 554 559 585 600 600Recommendable Battery Size [l] 1800 1800 1800 2000 3000 1500 2000 1500 1500 1800Height × Width × Depth of Boiler [mm] 1500 × 695 × 1240 1600 × 720 × 1240 1385 × 660 × 1200 1356 × 638 × 1360Depth of Boiler with Open Door [mm] - - - - - 1736 1736 1760 1760 1760Depth of Loading Space [mm] 560 560 560 560 560 560 560 550 550 550Height of Connection to Chimney [mm] 1010 1010 1010 1110 1110 1420 1420 1225 1225 1225Riser Connection [R”] 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4Return Line Connection [R”] 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4Connection for Recharging – Emission [R”] 5/4 5/4 5/4 5/4 5/4 1/2 1/2 1/2 1/2 1/2Connection for Thermal Fuse [R”] 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4Electrial Power Supply Connection 230 V +10/-15 %/50 Hz 160 W operating; 400 W ignition 230 V +10/-15%/50Hz 160 W operating; 400 W ignition 230 V+10/-15 %/50Hz 80 W operating; 200 W ignitionThickness of Sheet [mm] 7 5 5
G R E E N FA CT
The dust emission at full and partial performanceunder 15 mg/m3
Non-refundable funding is granted in all EU countries.
103
252
800
79
115
1065
12801736
1010
1440
1500
10101720
375
88512
75 1420
1373
560615Ø160
610660
1225 13
90
17402541138
695745
7
5020kW
FamilyStadlerPower
Stadler Power TR Stadler Power LT Stadler Power GT
Model TR 20 TR 25 TR 30 TR 40 TR 50 LT 20 LT 25 / LT 30 GT 20 GT 25 GT 30Nominal Heat Value [kW] 20 25 30 40 50 15-20 25-30 20 25 30Minimal Boiler Power [kW] 10 12 15 20 25 7 15 10 12 15Boiler Efficiency at Rated Power [%] 92,6 92,6 91 90,2 90,2 90 90,7 /91,4 91,4 91,5 91,7Storage Volume [l] 150 150 150 185 185 120 120 105 105 105Width, Height of Loading Door [mm] 430 × 400 400 × 440 400 × 350Water Quantity [l] 193 193 183 225 215 117 110 132 125 125Chimney Connection [mm] 150 150 150 180 180 150 150 150 150 150Permissible Operating Pressure [bar] 3 3 3 3 3 3 3 3 3 3Demanded Chimney Pressure [Pa] 10 10 10 15 15 13 13 13 13 13Max. Pre-flow Temperature [°C] 95 95 95 95 95 95 95 95 95 95Boiler Weight [kg] 750 750 750 770 785 554 559 585 600 600Recommendable Battery Size [l] 1800 1800 1800 2000 3000 1500 2000 1500 1500 1800Height × Width × Depth of Boiler [mm] 1500 × 695 × 1240 1600 × 720 × 1240 1385 × 660 × 1200 1356 × 638 × 1360Depth of Boiler with Open Door [mm] - - - - - 1736 1736 1760 1760 1760Depth of Loading Space [mm] 560 560 560 560 560 560 560 550 550 550Height of Connection to Chimney [mm] 1010 1010 1010 1110 1110 1420 1420 1225 1225 1225Riser Connection [R”] 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4Return Line Connection [R”] 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4 5/4Connection for Recharging – Emission [R”] 5/4 5/4 5/4 5/4 5/4 1/2 1/2 1/2 1/2 1/2Connection for Thermal Fuse [R”] 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4Electrial Power Supply Connection 230 V +10/-15 %/50 Hz 160 W operating; 400 W ignition 230 V +10/-15%/50Hz 160 W operating; 400 W ignition 230 V+10/-15 %/50Hz 80 W operating; 200 W ignitionThickness of Sheet [mm] 7 5 5
Power GTPower LT
Gasifier-type firewood fuelled boilers for central heating
7
G R E E N FA CT
The dust emission at full and partial performanceunder 15 mg/m3
Non-refundable funding is granted in all EU countries.
The Power GT series is a cheaper choice; however, it offers all the advantages of the new technology of wood gasification. • With the best combustion characteristics in
this price category • Furnace volume is 150 l • A separate combustion chamber • The control of the primary and secondary
flaps using a servomotor • The doors open to the right • Boiler regulator BXD 20• The boiler body consists of 5 mm thick
boiler plate
The technically completed Power LT series has been developed for the heating of resi-dential buildings. The series is equipped with a patented control system of primary and secondary air with servo motor.
• Suitable for new buildings as well as older buildings up to a surface of 300 m2 or more
• A modern design of combustion chamber with a volume of 120 l
• A round combustion chamber• A possibility to open the doors to the left or
right• A possibility of automatic ignition • Boiler regulator BXD 20• The boiler body consists of 5 mm thick
boiler plate
103
252
800
79
115
1065
12801736
1010
1440
1500
10101720
375
88512
75 1420
1373
560615Ø160
610660
1225 13
90
17402541138
695745
103
252
800
79
115
1065
12801736
1010
1440
1500
10101720
375
88512
75 1420
1373
560615Ø160
610660
1225 13
90
17402541138
695745
Stadler TVT is a Slovenian company with a clear vision: We produce heating systems that offer our customers comfort and with which they can save money, while still respecting the environment.
High technology, precise engineering and the latest knowledgeWe want our every product to be of high quality so that it can withstand high temperature and other burden as well as to have a long operating lifetime. This is achieved with a technologically sophisticated production and a precise planning, with our customers in mind.
More than 150 years of experienceOur company has been engaged in the manufacturing and selling of boilers and heaters in different ways for more than 150 years. In the course of the generations that have established the company Stadler TVT, we have gained valuable experience. We understand the meaning of heating.
Part of the NRG GroupStadler TVT is a member of the NRG Group, an international group which connects top European energy companies. Together we have the potential to research, design and realise plans for heating systems for individual customers, for large objects or even for entire residential areas.
www.stadlertvt.com
WVTERM, d.o.o.Preradovičeva 222000 Maribor Slovenia
Your seller
Phot
os m
ay d
iffer
from
the
actu
al p
rodu
ct. W
e ta
ke n
o re
spon
sibi
lity
for p
rintin
g er
rors
• De
sign
: Kon
tras
tika
MacedoniaBosnia and Herzegovina
Italy
Belgium
Montenegro
Kosovo
Austria
Slovenia
CroatiaSerbia
Netherlands
Germany