gasketing product index national guard products · rubber & non-metallics 0. other 3...
TRANSCRIPT
National Guard Products
T 2
© NGP, Inc. 2008
Symbols/Legend
10C2 8 H 7
ADA COMPLIANT Barrier Free Thresholds meet the requirements of the AMERICANS WITH DISABILITIESACT Accessibility Guidelines for Buildings and Facilities (ADAAG)-September 2002, and ICC/ANSI A117.1-2003Accessible and Usable Building and Facilities.
UL10B and CAN4-S104-80M CLASSIFIED, complies with NFPA 80 and NFPA 252 for application to Steel fire doors rated up to 3 Hrs., and Wood type fire doors rated up to 11/2 hrs.(Rating on some items vary and are noted.)
POSITIVE PRESSURE UL10C CLASSIFIED, Category ‘J’ listed. Complies with IBC, UBC7-2 (1997), NFPA 80 and NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 Hrs., and Wood type Fire doors rated up to 1-1/2 Hrs. (Ratings on some items vary and are noted.)
SLIP-RESISTANT NGP ‘SIA’ (Slick-it-Ain’t) textured surface is available on all thresholds. Our processembeds and fuses bits of hot nickel and titanium into the surface of the threshold. This technology originallydeveloped for use on aircraft carrier decks is very skid resistant and will not wear off.
ANSI/BHMA CERTIFIED. Certified thresholds comply with A156.21-2006 and are listed in the BHMACertified Products Directory.
Online product listings at www.ul.com/database
2 8 H 7
C L A S S I F I E D
2 8 H 7
The following chart interprets ANSI/BHMA numbers which identify material and type of products. For products thatmeet ANSI/BHMA Standards, look for the BHMA certified logo next to the product in our catalog. For a completelisting refer to the BHMA Certified Products Directory online at www.buildershardware.com.
American National Standard for Thresholds:ANSI/BHMA A156.21 (2006)
1Product Section
“J” designates Architectural Door
Trim,Thresholds
2Material
1. Architectural Extruded Brass or Bronze
3. Aluminum5. Stainless Steel7. Rubber &
non-metallics0. Other
3Configuration
1. Compressing Top2. Flat Saddle3. Half Saddle4. Interlocking5. Rabbeted, latching/
Panic6. Rabbeted, latching/
Panic w/gasket7. Plate8. Ramped9. Saddle for floor
closer.0. None designated
4Surface
1. Fluted2. Fluted w/abrasive3. Smooth4. Smooth w/abrasive
5Description
1. Applied Stop 2. Applied Stop
w/ gasket3. Barrier Free4. Carpet Separator5. Ends Mitered6. Expansion
Assembly7. Hook Strip Applied
to door8. Offset9. Thermal Barrier0. None Designated
6Description
1. Applied Stop 2. Applied Stop
w/ gasket3. Barrier Free4. Carpet Separator5. Ends Mitered6. Expansion
Assembly7. Hook Strip Applied
to door8. Offset9. Thermal Barrier0. None Designated
ANSI/BHMA
Sym
bo
ls -
Leg
end
AN
SI/
BH
MA
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
G 2 © NGP, Inc. 2008
Symbols/Legend
10C
S
UL10B & CAN4-S104-80M CLASSIFIED, complies with NFPA 80 and NFPA 252 for application to Steel fire doors rated up to 3 Hrs., and Wood type fire doors rated up to 1 1/2 hrs. (Rating on some items vary and are noted.)
POSITIVE PRESSURE UL10C CLASSIFIED, Category ‘J’ listed. Complies with IBC,UBC7-2 (1997) NFPA 80 and NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 Hrs., and Wood type fire doors rated up to 1-1/2 Hrs. (Ratings on some items vary and are noted.)
NGP-EDGE® SEALING SYSTEM, Category ‘G’ listed. Required for Category B listed wood type fire doors to meet positive pressure requirements complying with IBC, UBC7-2 (1997)Part 1, and NFPA 252. See individual products for maximum door size and ratings.
SMOKE & DRAFT CONTROL GASKETING, Category ‘H’ listed. Complies with IBC, UBC7-2 1997) Part 2, UL1784 , NFPA 105 for use on ‘S’ labeled Positive Pressure Steel fire doors rated up to 3 hours , and wood type fire doors rated up to 1-1/2 hrs.(Ratings on some items vary and are noted.)
ACOUSTICAL TESTED to ASTM E90 and ASTM E413, by Riverbank Acoustical Laboratories inGeneva, IL. Refer to chart on page G5 for test result data.
AIR INFILTRATION TESTED to ASTM E283, Standard Test Method for Determining Rate of AirLeakage Through Exterior Windows, Curtain Walls, and Doors.
ANSI/BHMA CERTIFIED. Certified gasketing complies with A156.22-2005, and is listed in the BHMACertified Products Directory.
Online product listings: www.ul.com/database
ESS
2 8 H 7
2 8 H 7
2 8 H 7
2 8 H 7
C L A S S I F I E D
2 8 H 7
2 8 H 7
Adhesive G12-G14Adjustable G29Allseal Premium G25Automatic Door Bottoms G30-G34Astragals G42-G47Bronze G27,G28Concealed Fastener G24, G34, G41, G44Door Aligning Astragals G49Door Closer Compatible G22,G23Drip Strips G26-G28Edge Sealing Systems G8-G12Fast Attach Tape (FATT) G14Finger Guard G48Foam Perimeter G19Glass Door G35
Interlocking G45Kerf G13, G19Magnetic G28, G44Metal Edges/Astragals G50, G51Mullion G12Neoprene Perimeter G16, G17Nylon Brush Perimeter G20, G21Pile Perimeter G15Polyurethane Perimeter G17Silicone Perimeter G18, G19Shoes G36-G38Sweeps G39-G41Stainless Steel G26Vinyl Perimeter G15
Gasketing Product Index
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sym
bo
ls/L
egen
d
Ind
ex
T 2
© NGP, Inc. 2008
Symbols/Legend
10C2 8 H 7
ADA COMPLIANT Barrier Free Thresholds meet the requirements of the AMERICANS WITH DISABILITIESACT Accessibility Guidelines for Buildings and Facilities (ADAAG)-September 2002, and ICC/ANSI A117.1-2003Accessible and Usable Building and Facilities.
UL10B and CAN4-S104-80M CLASSIFIED, complies with NFPA 80 and NFPA 252 for application to Steel fire doors rated up to 3 Hrs., and Wood type fire doors rated up to 11/2 hrs.(Rating on some items vary and are noted.)
POSITIVE PRESSURE UL10C CLASSIFIED, Category ‘J’ listed. Complies with IBC, UBC7-2 (1997), NFPA 80 and NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 Hrs., and Wood type Fire doors rated up to 1-1/2 Hrs. (Ratings on some items vary and are noted.)
SLIP-RESISTANT NGP ‘SIA’ (Slick-it-Ain’t) textured surface is available on all thresholds. Our processembeds and fuses bits of hot nickel and titanium into the surface of the threshold. This technology originallydeveloped for use on aircraft carrier decks is very skid resistant and will not wear off.
ANSI/BHMA CERTIFIED. Certified thresholds comply with A156.21-2006 and are listed in the BHMACertified Products Directory.
Online product listings at www.ul.com/database
2 8 H 7
C L A S S I F I E D
2 8 H 7
The following chart interprets ANSI/BHMA numbers which identify material and type of products. For products thatmeet ANSI/BHMA Standards, look for the BHMA certified logo next to the product in our catalog. For a completelisting refer to the BHMA Certified Products Directory online at www.buildershardware.com.
American National Standard for Thresholds:ANSI/BHMA A156.21 (2006)
1Product Section
“J” designates Architectural Door
Trim,Thresholds
2Material
1. Architectural Extruded Brass or Bronze
3. Aluminum5. Stainless Steel7. Rubber &
non-metallics0. Other
3Configuration
1. Compressing Top2. Flat Saddle3. Half Saddle4. Interlocking5. Rabbeted, latching/
Panic6. Rabbeted, latching/
Panic w/gasket7. Plate8. Ramped9. Saddle for floor
closer.0. None designated
4Surface
1. Fluted2. Fluted w/abrasive3. Smooth4. Smooth w/abrasive
5Description
1. Applied Stop 2. Applied Stop
w/ gasket3. Barrier Free4. Carpet Separator5. Ends Mitered6. Expansion
Assembly7. Hook Strip Applied
to door8. Offset9. Thermal Barrier0. None Designated
6Description
1. Applied Stop 2. Applied Stop
w/ gasket3. Barrier Free4. Carpet Separator5. Ends Mitered6. Expansion
Assembly7. Hook Strip Applied
to door8. Offset9. Thermal Barrier0. None Designated
ANSI/BHMA
Sym
bo
ls -
Leg
end
AN
SI/
BH
MA
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Symbols/Legend
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
03/11 American Building Supply, Inc. 1
National Guard Products
T 5
Typical Wall .125
8"
1/4
"
Typical Wall .125
9"
1/4
"
2 1/2"
1/4"
Typical Wall .125
1 3/8"1/
8"
Typical Wall .050
3"1/
4"
Typical Wall .125
Typical Wall .125
5"1/4
"
Typical Wall .125
6"
1/4
"
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
SLIP RESISTANT SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
410 .40 lbs./ft
410DKB .40 lbs./ft.
408 .10 lbs./ft.
408DKB .10 lbs./ft.
411 .50 lbs./ft
411DKB .50 lbs./ft.
Typical Wall .125
4"
1/4
"
413 .58 lbs./ft.
413DKB .58 lbs./ft.
513 .74 lbs./ft.
513DKB .74 lbs./ft.
613 .88 lbs./ft.
613DKB .88 lbs./ft.
Typical Wall .125
7"
1/4
"
713 1.01 lbs./ft
713DKB 1.01 lbs./ft.
813 1.20 lbs./ft
813DKB 1.20 lbs./ft.
913 1.41 lbs./ft
913DKB 1.41 lbs./ft.
Typical Wall .125
10"
1/4
"
1013 1.63 lbs./ft
1013DKB 1.63 lbs./ft.
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
All thresholds this page 10C
Sadd
le Th
resho
lds
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 5
Typical Wall .125
8"
1/4
"
Typical Wall .125
9"
1/4
"
2 1/2"
1/4"
Typical Wall .125
1 3/8"
1/8"
Typical Wall .050
3"
1/4"
Typical Wall .125
Typical Wall .125
5"
1/4
"
Typical Wall .125
6"
1/4
"
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
SLIP RESISTANT SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
410 .40 lbs./ft
410DKB .40 lbs./ft.
408 .10 lbs./ft.
408DKB .10 lbs./ft.
411 .50 lbs./ft
411DKB .50 lbs./ft.
Typical Wall .125
4"
1/4
"
413 .58 lbs./ft.
413DKB .58 lbs./ft.
513 .74 lbs./ft.
513DKB .74 lbs./ft.
613 .88 lbs./ft.
613DKB .88 lbs./ft.
Typical Wall .125
7"
1/4
"
713 1.01 lbs./ft
713DKB 1.01 lbs./ft.
813 1.20 lbs./ft
813DKB 1.20 lbs./ft.
913 1.41 lbs./ft
913DKB 1.41 lbs./ft.
Typical Wall .125
10"
1/4
"
1013 1.63 lbs./ft
1013DKB 1.63 lbs./ft.
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
All thresholds this page 10C
Sadd
le Th
resho
lds
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 5
Typical Wall .125
8"
1/4
"
Typical Wall .125
9"
1/4
"
2 1/2"
1/4"
Typical Wall .125
1 3/8"
1/8"
Typical Wall .050
3"
1/4"
Typical Wall .125
Typical Wall .125
5"
1/4
"
Typical Wall .125
6"
1/4
"
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
SLIP RESISTANT SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
410 .40 lbs./ft
410DKB .40 lbs./ft.
408 .10 lbs./ft.
408DKB .10 lbs./ft.
411 .50 lbs./ft
411DKB .50 lbs./ft.
Typical Wall .125
4"
1/4
"
413 .58 lbs./ft.
413DKB .58 lbs./ft.
513 .74 lbs./ft.
513DKB .74 lbs./ft.
613 .88 lbs./ft.
613DKB .88 lbs./ft.
Typical Wall .125
7"1/4
"
713 1.01 lbs./ft
713DKB 1.01 lbs./ft.
813 1.20 lbs./ft
813DKB 1.20 lbs./ft.
913 1.41 lbs./ft
913DKB 1.41 lbs./ft.
Typical Wall .125
10"
1/4
"
1013 1.63 lbs./ft
1013DKB 1.63 lbs./ft.
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
All thresholds this page 10CS
addle T
hresh
old
s
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 5
Typical Wall .125
8"
1/4
"
Typical Wall .125
9"
1/4
"
2 1/2"
1/4"
Typical Wall .125
1 3/8"
1/8"
Typical Wall .050
3"
1/4"
Typical Wall .125
Typical Wall .125
5"
1/4
"
Typical Wall .125
6"
1/4
"
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
SLIP RESISTANT SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
410 .40 lbs./ft
410DKB .40 lbs./ft.
408 .10 lbs./ft.
408DKB .10 lbs./ft.
411 .50 lbs./ft
411DKB .50 lbs./ft.
Typical Wall .125
4"
1/4
"
413 .58 lbs./ft.
413DKB .58 lbs./ft.
513 .74 lbs./ft.
513DKB .74 lbs./ft.
613 .88 lbs./ft.
613DKB .88 lbs./ft.
Typical Wall .125
7"
1/4
"
713 1.01 lbs./ft
713DKB 1.01 lbs./ft.
813 1.20 lbs./ft
813DKB 1.20 lbs./ft.
913 1.41 lbs./ft
913DKB 1.41 lbs./ft.
Typical Wall .125
10"
1/4
"
1013 1.63 lbs./ft
1013DKB 1.63 lbs./ft.
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
All thresholds this page 10C
Sadd
le Th
resho
lds
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 5
Typical Wall .125
8"
1/4
"
Typical Wall .125
9"
1/4
"
2 1/2"
1/4"
Typical Wall .125
1 3/8"
1/8"
Typical Wall .050
3"
1/4"
Typical Wall .125
Typical Wall .125
5"
1/4
"
Typical Wall .125
6"
1/4
"
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
SLIP RESISTANT SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
410 .40 lbs./ft
410DKB .40 lbs./ft.
408 .10 lbs./ft.
408DKB .10 lbs./ft.
411 .50 lbs./ft
411DKB .50 lbs./ft.
Typical Wall .125
4"
1/4
"
413 .58 lbs./ft.
413DKB .58 lbs./ft.
513 .74 lbs./ft.
513DKB .74 lbs./ft.
613 .88 lbs./ft.
613DKB .88 lbs./ft.
Typical Wall .125
7"
1/4
"
713 1.01 lbs./ft
713DKB 1.01 lbs./ft.
813 1.20 lbs./ft
813DKB 1.20 lbs./ft.
913 1.41 lbs./ft
913DKB 1.41 lbs./ft.
Typical Wall .125
10"
1/4
"
1013 1.63 lbs./ft
1013DKB 1.63 lbs./ft.
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
All thresholds this page 10C
Sad
dle T
hresh
old
s
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 5
Typical Wall .125
8"
1/4
"
Typical Wall .125
9"
1/4
"
2 1/2"
1/4"
Typical Wall .125
1 3/8"
1/8"
Typical Wall .050
3"
1/4"
Typical Wall .125
Typical Wall .125
5"1/4
"
Typical Wall .125
6"
1/4
"
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
SLIP RESISTANT SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
410 .40 lbs./ft
410DKB .40 lbs./ft.
408 .10 lbs./ft.
408DKB .10 lbs./ft.
411 .50 lbs./ft
411DKB .50 lbs./ft.
Typical Wall .125
4"
1/4
"
413 .58 lbs./ft.
413DKB .58 lbs./ft.
513 .74 lbs./ft.
513DKB .74 lbs./ft.
613 .88 lbs./ft.
613DKB .88 lbs./ft.
Typical Wall .125
7"
1/4
"
713 1.01 lbs./ft
713DKB 1.01 lbs./ft.
813 1.20 lbs./ft
813DKB 1.20 lbs./ft.
913 1.41 lbs./ft
913DKB 1.41 lbs./ft.
Typical Wall .125
10"
1/4
"
1013 1.63 lbs./ft
1013DKB 1.63 lbs./ft.
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
All thresholds this page 10C
Sadd
le Th
resho
lds
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
413
Stocked Product36”, 48”, 72”Aluminum, Dark Bronze
513
Stocked Product36”, 48”, 72”Aluminum, Dark Bronze
613
Stocked ProductAluminum 36”, 48”, 72”Dark Bronze 36”, 48”, 72
713
Stocked Product36”, 48”, 72”Aluminum, Dark Bronze
813
Stocked ProductAluminum 36”, 48”, 72”Dark Bronze 36”, 48”, 72
Saddle Thresholds
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
2 American Building Supply, Inc. 03/11
National Guard Products
Typical Wall .125
3"
3/8
"
211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"
1/2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"Typical Wall .162
Typical Wall .175
6"1/2
"
7"
1/2
"Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"
7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comS
addle T
hresh
old
s
T 13
321 .34 lbs./ft.
321DKB .34 lbs./ft.
3"
1/2"
Typical Wall .110322 .48 lbs./ft.
322DKB .48 lbs./ft. not intendedfor insert
3"* *
1/2
"Typical Wall .109
323 .56 lbs./ft.
323DKB .56 lbs./ft.
4"
Typical Wall .250
1/2
"
324 1.20 lbs./ft.
324DKB 1.20 lbs./ft.
5"
1/2"
Typical Wall .250325 1.32 lbs./ft.
325DKB 1.32 lbs./ft.
Typical Wall .110
4"
1/2
"
not intended for insert
327 .64 lbs./ft.
327DKB .64 lbs./ft.
5"
1/2
"
Typical Wall .110
not intended for insert
350 .83 lbs./ft.
350DKB .83 lbs./ft.
2"
1/4
"
Typical Wall .125
215 .29 lbs./ft.
215DKB .29 lbs./ft.
3"
1/4
"
Typical Wall .125
315 .44 lbs./ft.
315DKB .44 lbs./ft.
4"
1/4
"
Typical Wall .125
415 .51 lbs./ft.
415DKB .51 lbs./ft.
7"
3/4
"
Typical Wall .125
5"
3/4
"
Typical Wall .125
457 .79 lbs./ft.
457DKB .79 lbs./ft.
458 1.11 lbs./ft.
458DKB 1.11 lbs./ft.
when installed withthe non-beveled edgeFLUSH with flooring,or where no greaterthan 1/4” vertical riseoccurs.
All thresholds this page 10C
*
*
*
*
*
*
*
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
2"
1/2"
Typical Wall .110not intendedfor insert
Half-S
addle T
hresh
old
s
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
**
VINYL FOOT SEAL used instead of caulking to
increase the weather
resistance of the threshold.
Specify on order
*
424
Stocked Product36”, 48”, 72”Aluminum, Dark Bronze
425
Stocked Product36”, 48”, 72”Aluminum, Dark Bronze
Typical Wall .125
3"
3/8
"211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"1/
2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"
Typical Wall .162
Typical Wall .175
6"
1/2
"
7"
1/2
"
Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"
7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sadd
le Th
resho
lds
Typical Wall .125
3"
3/8
"
211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"
1/2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"
Typical Wall .162
Typical Wall .175
6"
1/2
"
7"
1/2
"
Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"
7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sadd
le Th
resho
lds
Typical Wall .125
3"
3/8
"
211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"
1/2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"
Typical Wall .162
Typical Wall .175
6"
1/2
"
7"
1/2
"
Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sadd
le Th
resho
ldsTypical Wall .125
3"
3/8
"
211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"
1/2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"
Typical Wall .162
Typical Wall .175
6"
1/2
"
7"
1/2
"
Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"
7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sadd
le Th
resho
lds
426
Stocked ProductAluminum 36”, 48”, 72”
Dark Bronze 36”, 48”, 72”
Saddle Thresholds
ADA Bumper Seal Thresholds
Half-Saddle Thresholds
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 8
All thresholds this page 10C
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
5"
1/2"
Typical Wall .244
425HD 1.6 lbs./ft.
425HDDKB 1.6 lbs./ft.
1/4
"
5"
513HD 1.4 lbs./ft.
513HDDKB 1.4 lbs./ft.
Typical Wall .105
5"
1/2
"
1/4
"
896 .64 lbs./ft.
896DKB .64 lbs./ft.
5"
1/2
"
Typical Wall .078
1/4
"
950 .50 lbs./ft.
950DKB .50 lbs./ft.
ADA COMPLIANT BUMPER SEAL THRESHOLDS
Excellent for use with Automatic Door Bottoms
Bumper Seal
*
Seals against the door
providing weather resistance
Vinyl ("V") supplied
unless other material
is specified
Options:
Neoprene ("N")
Silicone ("S")
Pile ("P")
*
*
HEAVY DUTY THRESHOLDS
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
* For use where forklift or vehicular traffic occurs.* Greatly exceeds ANSI A156 .21 load test requirements.* Optional “SIA” (Slick It Ain’t) fused slip-resistant finish
recommended in moisture prone areas.
Hea
vy D
uty
Th
resh
old
sA
DA
Bu
mp
er S
eal T
hre
sho
lds
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 8
All thresholds this page 10C
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
5"
1/2"
Typical Wall .244
425HD 1.6 lbs./ft.
425HDDKB 1.6 lbs./ft.
1/4
"
5"
513HD 1.4 lbs./ft.
513HDDKB 1.4 lbs./ft.
Typical Wall .105
5"
1/2
"
1/4
"
896 .64 lbs./ft.
896DKB .64 lbs./ft.
5"
1/2
"
Typical Wall .078
1/4
"
950 .50 lbs./ft.
950DKB .50 lbs./ft.
ADA COMPLIANT BUMPER SEAL THRESHOLDS
Excellent for use with Automatic Door Bottoms
Bumper Seal
*
Seals against the door
providing weather resistance
Vinyl ("V") supplied
unless other material
is specified
Options:
Neoprene ("N")
Silicone ("S")
Pile ("P")
*
*
HEAVY DUTY THRESHOLDS
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
* For use where forklift or vehicular traffic occurs.* Greatly exceeds ANSI A156 .21 load test requirements.* Optional “SIA” (Slick It Ain’t) fused slip-resistant finish
recommended in moisture prone areas.
Hea
vy D
uty
Th
resh
old
sA
DA
Bu
mp
er S
eal T
hre
sho
lds
Typical Wall .125
3"
3/8
"
211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"
1/2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"
Typical Wall .162
Typical Wall .175
6"
1/2
"
7"
1/2
"
Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"
7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sadd
le Th
resho
lds
986V
Stocked Product36”, 72”Aluminum, Dark Bronze
350 Stocked Product36”, 48”Aluminum
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 8
All thresholds this page 10C
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
5"
1/2"
Typical Wall .244
425HD 1.6 lbs./ft.
425HDDKB 1.6 lbs./ft.
1/4
"5"
513HD 1.4 lbs./ft.
513HDDKB 1.4 lbs./ft.
Typical Wall .105
5"
1/2
"
1/4
"
896 .64 lbs./ft.
896DKB .64 lbs./ft.
5"
1/2
"
Typical Wall .078
1/4
"
950 .50 lbs./ft.
950DKB .50 lbs./ft.
ADA COMPLIANT BUMPER SEAL THRESHOLDS
Excellent for use with Automatic Door Bottoms
Bumper Seal
*
Seals against the door
providing weather resistance
Vinyl ("V") supplied
unless other material
is specified
Options:
Neoprene ("N")
Silicone ("S")
Pile ("P")
*
*
HEAVY DUTY THRESHOLDS
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
* For use where forklift or vehicular traffic occurs.* Greatly exceeds ANSI A156 .21 load test requirements.* Optional “SIA” (Slick It Ain’t) fused slip-resistant finish
recommended in moisture prone areas.
Hea
vy D
uty
Th
resh
old
sA
DA
Bu
mp
er S
eal T
hre
sho
lds
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 8
All thresholds this page 10C
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
5"
1/2"
Typical Wall .244
425HD 1.6 lbs./ft.
425HDDKB 1.6 lbs./ft.
1/4
"
5"
513HD 1.4 lbs./ft.
513HDDKB 1.4 lbs./ft.
Typical Wall .105
5"
1/2
"
1/4
"
896 .64 lbs./ft.
896DKB .64 lbs./ft.
5"
1/2
"
Typical Wall .078
1/4
"
950 .50 lbs./ft.
950DKB .50 lbs./ft.
ADA COMPLIANT BUMPER SEAL THRESHOLDS
Excellent for use with Automatic Door Bottoms
Bumper Seal
*
Seals against the door
providing weather resistance
Vinyl ("V") supplied
unless other material
is specified
Options:
Neoprene ("N")
Silicone ("S")
Pile ("P")
*
*
HEAVY DUTY THRESHOLDS
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
* For use where forklift or vehicular traffic occurs.* Greatly exceeds ANSI A156 .21 load test requirements.* Optional “SIA” (Slick It Ain’t) fused slip-resistant finish
recommended in moisture prone areas.
Hea
vy D
uty
Th
resh
old
sA
DA
Bu
mp
er S
eal T
hre
sho
lds
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
T 8
All thresholds this page 10C
MATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
5"
1/2"
Typical Wall .244
425HD 1.6 lbs./ft.
425HDDKB 1.6 lbs./ft.
1/4
"
5"
513HD 1.4 lbs./ft.
513HDDKB 1.4 lbs./ft.
Typical Wall .105
5"
1/2
"
1/4
"
896 .64 lbs./ft.
896DKB .64 lbs./ft.
5"
1/2
"
Typical Wall .078
1/4
"
950 .50 lbs./ft.
950DKB .50 lbs./ft.
ADA COMPLIANT BUMPER SEAL THRESHOLDS
Excellent for use with Automatic Door Bottoms
Bumper Seal
*
Seals against the door
providing weather resistance
Vinyl ("V") supplied
unless other material
is specified
Options:
Neoprene ("N")
Silicone ("S")
Pile ("P")
*
*
HEAVY DUTY THRESHOLDS
FASTENERS#10 x -1-1/2” FH zinc platedwood screws are included on millfinish thresholds. Zinc platedantique bronze finish screws areprovided to match DKB finish.
* For use where forklift or vehicular traffic occurs.* Greatly exceeds ANSI A156 .21 load test requirements.* Optional “SIA” (Slick It Ain’t) fused slip-resistant finish
recommended in moisture prone areas.
Hea
vy D
uty
Th
resh
old
sA
DA
Bu
mp
er S
eal T
hre
sho
lds
Typical Wall .125
3"
3/8
"
211 .43 lbs./ft.
211DKB .43 lbs./ft.
All thresholds this page 10CMATERIALS & FINISHES
• Aluminum mill finish • DKB - Aluminum dark bronze
finish
Slip Resistant SIA Finish
All thresholds are available withour slip resistant, non-skid finishfor better traction. Suffix “SIA”.
4"
1/2"
Typical Wall .125
4"
1/2
"
Typical Wall .125
5"
1/2
"
Typical Wall .162
Typical Wall .175
6"
1/2
"
7"
1/2
"
Typical Wall .188
412 .625 lbs./ft.
412DKB .625 lbs./ft.
424 .72 lbs./ft.
424DKB .72 lbs./ft.
425 1.00 lbs./ft.
425DKB 1.00 lbs./ft.
426 1.35 lbs./ft.
426DKB 1.35 lbs./ft.
427 1.58 lbs./ft.
427DKB 1.58 lbs./ft.
Typical Wall .188
5"
5/8
"
525 .93 lbs./ft.
525DKB .93 lbs./ft.
4"
5/8
"
Typical W all .188524 .72 lbs./ft.
524DKB .72 lbs./ft.
1/2
"
7 1/2"
8475 1.58 lbs./ft.
8475DKB 1.58 lbs./ft.
T 7
T H R E S H O L D S
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Sadd
le Th
resho
lds
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
03/11 American Building Supply, Inc. 3
National Guard Products
G 28
Drip Strips
2 1/2"
1 1
/2"
5/8
"
3/4"
1 1
/2"
16A16B16DKB
1717B17DKB
#6 x 3/4” SMS furnished
Spring Bronze Weatherstrip
#6 x 3/4” Stainless steel SMS furnished.Screw holes slotted for adjustment.Maximum length 144”
Magnetic Seals
Cushion Bronze Weatherstrip
DOOR
1 1
/4"
5/8"
Frame Stop
Hinge Side
159MA159MB159MDKB
DOOR
.0725/8
"
Frame Stop
Head and Lock Jamb
43CB9/16"
1 1/8"
Use No. 41 DrillNo. 4 wafer head drive nails
METAL JAMBS
WOOD JAMBS
#17 x 3/4 Nail
DOOR
HINGEJAMB
#17Nail
Cushion material will not coil. Specify lengths required (36”, 48”, 72”86”, and 96”.) All other lengths on special order. Nails not included.Normal installation requires 3/4 lb. of nails per 100 ft. of weatherstrip.Bronze .006 nails available in 1 lb. bags. Wafer head pilot point drivenails make excellent applications for metal jambs, normal installationrequires 6 per foot. Install using #41 drill bit.Available with Fast Attach Tape- Specify x “FATT”
50SB9"
Lock Strip
10C
DOOR
15/3
2"
Frame
Stop
Head and Lock Jamb
DOOR
7/8
"
15/32"
Frame Stop
Hinge Side
157MA157MDKB 10C
magnet encased in gray vinyl
magnet encased in brown vinyl
Spring Bronze .009”Plain spring Bronze - 100’ rolls
Fasteners not included unless specified.
Cat. No. Width43SB 1 1/8”44SB 1 1/4”45SB 1 3/8”
A - clearB - gold DKB - dark bronze
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Bro
nze
Wea
ther
stri
p
Mag
net
ic S
eals
,Dri
p S
trip
s
G 37
1/4
"
vinyl
3/4
"
1 3/4"
1/4
"
35EV 35EVDKB
vinyl
1 3/4"1/4
"3/4
"1/4
"
35VA 35VB35VDKB
36EV 36EVDKB
1/2
"
vinyl
1 3/4"
1 "
36VA36VDKB
1/2
"
vinyl
1 3/16"
312V312VDKB
vinyl
1 3/16"
3/4
"1/4
"1/4
"
313VA 313VDKB
vinyl
1/2
"1"
318V318VDKB
1/2
"
vinyl
7/8
"
1 3/4"
319EV319EVDKB
319V319VA319VB319VDKB
All vinyl door
shoes
this section
10CFinned Vinyl Door Shoes#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
3/8
"
gray
pile
1 3/4"
154P154PDKB
3/8
"
gray
pile
5/32"
1 7/16"
254P254PDKB
Pile Door Shoes#6 x 3/4” stainless steelSMS furnished.
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is gray S
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or S
ho
es
1/2
"vinyl
7/8
"
1 3/4"
1/2
"
vinyl
1 3/4"
1 "
G 37
1/4
"
vinyl
3/4
"
1 3/4"
1/4
"
35EV 35EVDKB
vinyl
1 3/4"
1/4
"3/4
"1/4
"
35VA 35VB35VDKB
36EV 36EVDKB
1/2
"
vinyl
1 3/4"
1 "
36VA36VDKB
1/2
"
vinyl
1 3/16"
312V312VDKB
vinyl
1 3/16"
3/4
"1/4
"1/4
"
313VA 313VDKB
vinyl
1/2
"1"
318V318VDKB
1/2
"
vinyl
7/8
"
1 3/4"
319EV319EVDKB
319V319VA319VB319VDKB
All vinyl door
shoes
this section
10CFinned Vinyl Door Shoes#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
3/8
"
gray
pile
1 3/4"
154P154PDKB
3/8
"
gray
pile
5/32"
1 7/16"
254P254PDKB
Pile Door Shoes#6 x 3/4” stainless steelSMS furnished.
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is gray S
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or S
ho
es
1/2
"vinyl
7/8
"
1 3/4"
1/2
"
vinyl
1 3/4"
1 "
G 37
1/4
"
vinyl
3/4
"
1 3/4"
1/4
"
35EV 35EVDKB
vinyl
1 3/4"
1/4
"3/4
"1/4
"
35VA 35VB35VDKB
36EV 36EVDKB
1/2
"
vinyl
1 3/4"
1 "
36VA36VDKB
1/2
"
vinyl
1 3/16"
312V312VDKB
vinyl
1 3/16"
3/4
"1/4
"1/4
"
313VA 313VDKB
vinyl
1/2
"1"
318V318VDKB
1/2
"
vinyl
7/8
"
1 3/4"
319EV319EVDKB
319V319VA319VB319VDKB
All vinyl door
shoes
this section
10CFinned Vinyl Door Shoes#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
3/8
"
gray
pile
1 3/4"
154P154PDKB
3/8
"
gray
pile
5/32"
1 7/16"
254P254PDKB
Pile Door Shoes#6 x 3/4” stainless steelSMS furnished.
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is gray S
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or S
ho
es
1/2
"vinyl
7/8
"
1 3/4"
1/2
"
vinyl
1 3/4"
1 "
G 37
1/4
"
vinyl
3/4
"
1 3/4"
1/4
"
35EV 35EVDKB
vinyl
1 3/4"
1/4
"3/4
"1/4
"
35VA 35VB35VDKB
36EV 36EVDKB
1/2
"
vinyl
1 3/4"
1 "
36VA36VDKB
1/2
"
vinyl
1 3/16"
312V312VDKB
vinyl
1 3/16"
3/4
"1/4
"1/4
"
313VA 313VDKB
vinyl
1/2
"1"
318V318VDKB
1/2
"
vinyl
7/8
"
1 3/4"
319EV319EVDKB
319V319VA319VB319VDKB
All vinyl door
shoes
this section
10CFinned Vinyl Door Shoes#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
3/8
"
gray
pile
1 3/4"
154P154PDKB
3/8
"
gray
pile
5/32"
1 7/16"
254P254PDKB
Pile Door Shoes#6 x 3/4” stainless steelSMS furnished.
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is gray S
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or S
ho
es
1/2
"vinyl
7/8
"
1 3/4"
1/2
"
vinyl
1 3/4"
1 "
G 37
1/4
"
vinyl
3/4
"
1 3/4"
1/4
"
35EV 35EVDKB
vinyl
1 3/4"
1/4
"3/4
"1/4
"
35VA 35VB35VDKB
36EV 36EVDKB
1/2
"
vinyl
1 3/4"
1 "
36VA36VDKB
1/2
"
vinyl
1 3/16"
312V312VDKB
vinyl
1 3/16"
3/4
"1/4
"1/4
"
313VA 313VDKB
vinyl
1/2
"1"
318V318VDKB
1/2
"
vinyl
7/8
"
1 3/4"
319EV319EVDKB
319V319VA319VB319VDKB
All vinyl door
shoes
this section
10CFinned Vinyl Door Shoes#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
3/8
"
gray
pile
1 3/4"
154P154PDKB
3/8
"
gray
pile
5/32"
1 7/16"
254P254PDKB
Pile Door Shoes#6 x 3/4” stainless steelSMS furnished.
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is gray S
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or S
ho
es
1/2
"vinyl
7/8
"
1 3/4"
1/2
"
vinyl
1 3/4"
1 "
16Stocked Product Aluminum 36”, 40”, 72”, 76”
Drip Strip
35EVStocked Product 36”, 48”Aluminum, Dark Bronze
36EV
Stocked Product36”, 48”Aluminum, Dark Bronze
318VStocked Product 36”, 48”Aluminum, Dark Bronze
319EV
Stocked Product36”, 48”Aluminum, Dark Bronze
Door Shoes
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
4 American Building Supply, Inc. 03/11
National Guard Products
All productsthis page
10C
G 38
1/2
"
vinyl
1 3/16"
1/2
"
vinyl
1 3/16" 1/4"
1 "
1/4
"1/4
"
vinyl
1/2
"1 "
12V12VDKB
13VA13VDKB
18V18VDKB
Smooth Vinyl Door Shoes
1/4
"
vinyl
1 3/4"
3/4
"1/4
"
1/2
"
vinyl
1 3/4"
1 "
19V19VA19VB19VDKB
5VA5VB5VDKB
1/2
"
vinyl
1 3/4"
1"
6VA6VDKB
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is grayneoprene is black Brush is gray with clearanodized metal; black withDKB metal
Extended Door Shoes
3"
1 3/4"
9/1
6"
99WHA 99WHDKB
99NWHA99NWHDKB
neoprene & nylon brush
99VA99VDKB
vinyl
99VWHA 99VWHDKB
vinyl & nylon brushnylon brush
#6 x 3/4” stainless steel SMS furnished.
neoprene
99NA99NDKB
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished. Screw holes slotted for adjustment.
S
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or
Sh
oes
All productsthis page
10C
G 38
1/2
"
vinyl
1 3/16"
1/2
"
vinyl
1 3/16" 1/4"
1 "
1/4
"1/4
"
vinyl
1/2
"1 "
12V12VDKB
13VA13VDKB
18V18VDKB
Smooth Vinyl Door Shoes
1/4
"
vinyl
1 3/4"
3/4
"1/4
"
1/2
"
vinyl
1 3/4"
1 "
19V19VA19VB19VDKB
5VA5VB5VDKB
1/2
"
vinyl
1 3/4"
1"
6VA6VDKB
A - clear B - gold
DKB - dark bronzeno suffix - mill vinyl is grayneoprene is black Brush is gray with clearanodized metal; black withDKB metal
Extended Door Shoes
3"
1 3/4"
9/1
6"
99WHA 99WHDKB
99NWHA99NWHDKB
neoprene & nylon brush
99VA99VDKB
vinyl
99VWHA 99VWHDKB
vinyl & nylon brushnylon brush
#6 x 3/4” stainless steel SMS furnished.
neoprene
99NA99NDKB
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished. Screw holes slotted for adjustment.
S
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comD
oo
r S
ho
es
G 39
7/8
"1/2
"
600600A600B600DKB
3/4
"9/1
6"
C607AC607BC607DKB
9/1
6"
1 7
/16"
C627AC627BC627DKB
3/4
"1/2
"
B606AB606BB606DKB
1 1
/16"
1"
D608AD608BD608DKB
1 3
/16"
1 9
/16"
E609AE609BE609DKB
1 3
/8"
1 3
/4"
G610AG610BG610DKB
2 1
/2"
1 3
/8"
H612AH612BH612DKB
Nylon Brush Plus
Specially formulated to withstandgreater temperature extremeswhile providing maximum protec-tion against air infiltration. NylonBrush Plus color is Tan.
5/8
"7/1
6"
nylon+ 7/8
"1/2
"
nylon+
All productsthis page
10C
96009600A9600B9600DKB
9605A9605B9605DKB
7/8
"1"
601601A601B601DKB
5/8
"1
"
OV633AOV633BOV633DKB
5/8
"3/4
"
OV634AOV634BOV634DKB
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished.Screw holes are slotted for adjustment.
A - clear with gray brush B - gold with black brush
DKB - dark bronze with black brushno suffix - mill with gray brush
S
Nylon Brush Sweeps
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Nylo
n B
rush
Sw
eeps
5/8
"7/1
6"
A605AA605BA605DKB
G 39
7/8
"1/2
"
600600A600B600DKB
3/4
"9/1
6"
C607AC607BC607DKB
9/1
6"
1 7
/16"
C627AC627BC627DKB
3/4
"1/2
"
B606AB606BB606DKB
1 1
/16"
1"
D608AD608BD608DKB
1 3
/16"
1 9
/16"
E609AE609BE609DKB
1 3
/8"
1 3
/4"
G610AG610BG610DKB
2 1
/2"
1 3
/8"
H612AH612BH612DKB
Nylon Brush Plus
Specially formulated to withstandgreater temperature extremeswhile providing maximum protec-tion against air infiltration. NylonBrush Plus color is Tan.
5/8
"7/1
6"
nylon+ 7/8
"1/2
"
nylon+
All productsthis page
10C
96009600A9600B9600DKB
9605A9605B9605DKB
7/8
"1"
601601A601B601DKB
5/8
"1"
OV633AOV633BOV633DKB
5/8
"3/4
"
OV634AOV634BOV634DKB
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished.Screw holes are slotted for adjustment.
A - clear with gray brush B - gold with black brush
DKB - dark bronze with black brushno suffix - mill with gray brush
S
Nylon Brush Sweeps
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Nylo
n B
rush
Sw
eeps
5/8
"7/1
6"
A605AA605BA605DKB
G 41
7/8
"
vinyl
7/8
"
96V96VA96VB96VDKB
#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
vinyl
7/8
"
97V97VA97VB97VDKB•
3/4
"
vinyl
7/8
"
98V98VA98VB98VDKB
1/2
"
vinyl
7/8
"
100V100VA100VB100VDKB••
3/4
"
vinyl
1 1
/16"
102VA102VB102VDKB•
3/4
"1
1/4
"
vinyl
1025VA1025VB1025VDKB•
vinyl is gray
Exceptions:•vinyl is black •• vinyl is brown
Allproductsthis page 10C
1/2
"
vinyl
1 1
/2"
1 3
/16
"
vinyl
5/1
6"
1015V1015VDKB
101V101VA101VB101VDKB
9/32"
1"
9/16"
9/32"
3/4"
9/16"
9/32"
7/16"
9/16"
1"
7/16"
1"
1"
7/16"
3/4"
1"
7/16"
7/16"
675A675B675DKB
678A678B678DKB
679A679B679DKB
674A674B674DKB
673A673B673DKB
672A672B672DKB
Concealed Fastener Nylon Brush SweepsBrush is gray with clear anodized metal;black with gold and DKB metal
Vinyl Sweeps
S
A - clear B - gold
DKB - dark bronze no suffix - mill
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.comD
oo
r Sw
eeps
G 41
7/8
"
vinyl
7/8
"
96V96VA96VB96VDKB
#6 x 3/4” stainless steel SMS furnished.Screw holes slotted for adjustment.
1"
vinyl
7/8
"
97V97VA97VB97VDKB•
3/4
"
vinyl
7/8
"
98V98VA98VB98VDKB
1/2
"
vinyl
7/8
"
100V100VA100VB100VDKB••
3/4
"
vinyl
1 1
/16"
102VA102VB102VDKB•
3/4
"1 1
/4"
vinyl
1025VA1025VB1025VDKB•
vinyl is gray
Exceptions:•vinyl is black •• vinyl is brown
Allproductsthis page 10C
1/2
"
vinyl
1 1
/2"
1 3
/16"
vinyl
5/1
6"
1015V1015VDKB
101V101VA101VB101VDKB
9/32"
1"
9/16"
9/32"
3/4"
9/16"
9/32"
7/16"
9/16"
1"
7/16"
1"
1"
7/16"
3/4"
1"
7/16"
7/16"
675A675B675DKB
678A678B678DKB
679A679B679DKB
674A674B674DKB
673A673B673DKB
672A672B672DKB
Concealed Fastener Nylon Brush SweepsBrush is gray with clear anodized metal;black with gold and DKB metal
Vinyl Sweeps
S
A - clear B - gold
DKB - dark bronze no suffix - mill
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or S
weep
s99V
Stocked Product36”, 48”Aluminum, Dark Bronze
Door Shoes
Nylon Brush Sweeps
Door Sweeps
C627
Stocked Product36”, 48”Aluminum, Dark Bronze
Door Sweeps
G 40
5/16"neoprene
15/1
6"
3/4"117N117NDKB
1 5
/8"
neoprene
7/8
"
197NA197NB197NDKB
2"
neoprene
1"
3/8"
203NA203NB203NDKB
1"
black
reinforced
rubber
1 1
/16"
2014RA2014RB2014RDKB
5/8
"
neoprene
1"
3/8"
202NA202NB202NDKB
1"
neoprene
7/8
"
198NA198NB198NDKB
1"
neoprene
1 1
/4"
199NA199NB199NDKB
3/8
"1 1
/4"
polyurethane
200UA200UB200UDKB
1/2
"neoprene
1 1
/16"
201NA201NB201NDKB
7/1
6"
neoprene
1 1
/4"
neoprene200NA 200NB200NDKB
7/8
"
polyurethane
7/8
"
198UA198UB198UDKB
7/1
6"
neoprene
1 1
/4"
silicone200SA200SB 200SDKB
All products this page
10C
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished.Screw holes are slotted for adjustment.
neoprene is black S
Neoprene Sweeps
Rubber Sweep Polyurethane Sweeps Silicone Sweeppolyurethane is black silicone is gray
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or
Sw
eep
s
200N
Stocked Product36”, 48”Aluminum, Dark Bronze
101VStocked Product36”Aluminum
G 40
5/16"neoprene
15/1
6"
3/4"117N117NDKB
1 5
/8"
neoprene7/8
"
197NA197NB197NDKB
2"
neoprene
1"
3/8"
203NA203NB203NDKB
1"
black
reinforced
rubber
1 1
/16"
2014RA2014RB2014RDKB
5/8
"
neoprene
1"
3/8"
202NA202NB202NDKB
1"
neoprene
7/8
"
198NA198NB198NDKB
1"
neoprene
1 1
/4"
199NA199NB199NDKB
3/8
"1 1
/4"
polyurethane
200UA200UB200UDKB
1/2
"neoprene
1 1
/16"
201NA201NB201NDKB
7/1
6"
neoprene
1 1
/4"
neoprene200NA 200NB200NDKB
7/8
"
polyurethane
7/8
"
198UA198UB198UDKB
7/1
6"
neoprene
1 1
/4"
silicone200SA200SB 200SDKB
All products this page
10C
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished.Screw holes are slotted for adjustment.
neoprene is black S
Neoprene Sweeps
Rubber Sweep Polyurethane Sweeps Silicone Sweeppolyurethane is black silicone is gray
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or
Sw
eep
s
G 40
5/16"neoprene
15/1
6"
3/4"117N117NDKB
1 5
/8"
neoprene7/8
"
197NA197NB197NDKB
2"
neoprene
1"
3/8"
203NA203NB203NDKB
1"
black
reinforced
rubber
1 1
/16"
2014RA2014RB2014RDKB
5/8
"
neoprene
1"
3/8"
202NA202NB202NDKB
1"
neoprene
7/8
"
198NA198NB198NDKB
1"
neoprene
1 1
/4"
199NA199NB199NDKB
3/8
"1 1
/4"
polyurethane
200UA200UB200UDKB
1/2
"neoprene
1 1
/16"
201NA201NB201NDKB
7/1
6"
neoprene
1 1
/4"
neoprene200NA 200NB200NDKB
7/8
"
polyurethane
7/8
"
198UA198UB198UDKB
7/1
6"
neoprene
1 1
/4"
silicone200SA200SB 200SDKB
All products this page
10C
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished.Screw holes are slotted for adjustment.
neoprene is black S
Neoprene Sweeps
Rubber Sweep Polyurethane Sweeps Silicone Sweeppolyurethane is black silicone is gray
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Do
or
Sw
eep
s
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
03/11 American Building Supply, Inc. 5
Automatic Door Bottoms - Mortise
National Guard Products
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 31
2 5
/16"
15/16"
7/8"Max.Drop
neoprene(1, 2)420NA 420NB420NDKB
2 5
/16"
15/16"
7/8"Max.Drop
neoprene(2)520NA 520NB 520NDKB
2 5
/16"
15/16"
7/8" Max. Drop
nylon brush(2)680A 680B 680DKB
7/8"Max.
2 5
/16"
15/16"
neoprene (1)421NA421NB421NDKB
2"
5/8"
SURFACE
3/4"Max.Drop
neoprene223NA223NB223NDKB
The EZ-Touch door bottomrequires only 3 to 5 pounds ofpressure to activate.
Perfect for accessibility applica-tions and still provides aneffective seal.
Available 24” to 48” in length.
End caps available - pleasespecify
Sliding or Pocket Doors Surface or Half Mortise -Heavy DutyE-Z Touch
• Use with a threshold for maximum sealing capability.• Nylon brush recommended for carpet applications where no threshold is provided.• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” • End caps furnished standard
Automatic Door Bottoms - Heavy Duty Surface
All productsthis page
10C S
Designed for use on sliding orpocket doors. A series of actuating bars keep the seal parallel to the sill or thresholduntil the door is in the closedposition.
Available 12” to 144” in length.
End caps not available
silicone223SA223SB223SDKB
1. Lead insert available for radiation shield on special order.2. For half mortise applications specify HM in item number prior to finish (ie: 420NHMDKB).
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic Do
or B
otto
ms - S
urface
G 32
1 7
/8"
21/32"
3/8" 1"Max.Drop
Mortise required 3/4" x 1 15/16"
225N neoprene
225S silicone
225WH nylon brush
Available 12” to 60” in lengthAvailable with lead insert for radiation shield - specify
neoprene
1 9/
16"
9/16"
3/4"Max. Drop
AdjustingScrew
Mortise required11/16" x 1 5/8"
335N neoprene
335S silicone
Available 24” to 48” in lengthFits wood fire door mortise restrictions
1 1/2"
1/8"
3/4
"
1/2"Max.Drop
320N neoprene
320S silicone
320V vinyl
Hollow Metal Doors
Fits in 1 5/8” x 3/4” channel. May be field cut (up to 4”) in length. A “furringstrip” may be used to lower this automatic door bottom when a deeper channel is used.
Furnished 1/2” shorter than ordered to fit within net door size. (i.e. 36” is furnished 35 1/2”)
Fire ratings apply to metal doors only.
#4 x 5/8” SMS furnished
Available 24” to 48” in length.
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• End caps available - please specify
All productsthis page 10C S
Automatic Door Bottoms - Mortise
neoprene is blacksilicone, nylon brush &vinyl are gray
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- M
ort
ise
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1
3/8
"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 31
2 5
/16"
15/16"
7/8"Max.Drop
neoprene(1, 2)420NA 420NB420NDKB
2 5
/16"
15/16"
7/8"Max.Drop
neoprene(2)520NA 520NB 520NDKB
2 5
/16"
15/16"
7/8" Max. Drop
nylon brush(2)680A 680B 680DKB
7/8"Max.
2 5
/16"
15/16"
neoprene (1)421NA421NB421NDKB
2"
5/8"
SURFACE
3/4"Max.Drop
neoprene223NA223NB223NDKB
The EZ-Touch door bottomrequires only 3 to 5 pounds ofpressure to activate.
Perfect for accessibility applica-tions and still provides aneffective seal.
Available 24” to 48” in length.
End caps available - pleasespecify
Sliding or Pocket Doors Surface or Half Mortise -Heavy DutyE-Z Touch
• Use with a threshold for maximum sealing capability.• Nylon brush recommended for carpet applications where no threshold is provided.• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” • End caps furnished standard
Automatic Door Bottoms - Heavy Duty Surface
All productsthis page
10C S
Designed for use on sliding orpocket doors. A series of actuating bars keep the seal parallel to the sill or thresholduntil the door is in the closedposition.
Available 12” to 144” in length.
End caps not available
silicone223SA223SB223SDKB
1. Lead insert available for radiation shield on special order.2. For half mortise applications specify HM in item number prior to finish (ie: 420NHMDKB).
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic Do
or B
otto
ms - S
urface
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 32
1 7
/8"
21/32"
3/8" 1"Max.Drop
Mortise required 3/4" x 1 15/16"
225N neoprene
225S silicone
225WH nylon brush
Available 12” to 60” in lengthAvailable with lead insert for radiation shield - specify
neoprene
1 9/
16"
9/16"
3/4"Max. Drop
AdjustingScrew
Mortise required11/16" x 1 5/8"
335N neoprene
335S silicone
Available 24” to 48” in lengthFits wood fire door mortise restrictions
1 1/2"
1/8"
3/4
"
1/2"Max.Drop
320N neoprene
320S silicone
320V vinyl
Hollow Metal Doors
Fits in 1 5/8” x 3/4” channel. May be field cut (up to 4”) in length. A “furringstrip” may be used to lower this automatic door bottom when a deeper channel is used.
Furnished 1/2” shorter than ordered to fit within net door size. (i.e. 36” is furnished 35 1/2”)
Fire ratings apply to metal doors only.
#4 x 5/8” SMS furnished
Available 24” to 48” in length.
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• End caps available - please specify
All productsthis page 10C S
Automatic Door Bottoms - Mortise
neoprene is blacksilicone, nylon brush &vinyl are gray
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- M
ort
ise
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 32
1 7
/8"
21/32"
3/8" 1"Max.Drop
Mortise required 3/4" x 1 15/16"
225N neoprene
225S silicone
225WH nylon brush
Available 12” to 60” in lengthAvailable with lead insert for radiation shield - specify
neoprene
1 9/
16"
9/16"
3/4"Max. Drop
AdjustingScrew
Mortise required11/16" x 1 5/8"
335N neoprene
335S silicone
Available 24” to 48” in lengthFits wood fire door mortise restrictions
1 1/2"
1/8"
3/4
"
1/2"Max.Drop
320N neoprene
320S silicone
320V vinyl
Hollow Metal Doors
Fits in 1 5/8” x 3/4” channel. May be field cut (up to 4”) in length. A “furringstrip” may be used to lower this automatic door bottom when a deeper channel is used.
Furnished 1/2” shorter than ordered to fit within net door size. (i.e. 36” is furnished 35 1/2”)
Fire ratings apply to metal doors only.
#4 x 5/8” SMS furnished
Available 24” to 48” in length.
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• End caps available - please specify
All productsthis page 10C S
Automatic Door Bottoms - Mortise
neoprene is blacksilicone, nylon brush &vinyl are gray
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- M
ort
ise
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
G 30
19/32"
1"Max.Drop
2 1
/4"
neoprene(1, 2)220NA220NB220NDKB
11/16"
1"Max.Drop
2 3
/32"
neoprene(1)222NA 222NB 222NDKB
silicone(1)222SA 222SB 222SDKB
nylon brush222WHA222WHB222WHDKB
silicone(1, 2)220SA220SB220SDKB
nylon brush(2)220WHA220WHB220WHDKB
• Use with a threshold for maximum sealing capability • Nylon brush recommended for carpet applications where no threshold is provided• Specify the exact net length of your Automatic Door bottom, whenever possible.
Automatic Door Bottoms 32” and larger may be cut up to 4” in the field, 24” to 32” may be cut 2”, under 24” should not be cut in the field
• Minimum length 12”, maximum length 60” (except 780)• End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing
3/4"Max.Drop
2 1
/8"
19/32"neoprene(1, 2)310NA310NB310NDKB
silicone(1, 2)310SA310SB310SDKB
nylon brush(2)310WHA310WHB310WHDKB
Max Drop 1/2"
1 3
/8"
silicone 780SA780SDKB
vinyl 780VA780VDKB
Available 24” to 96” in lengthEnd caps furnished standard.Will work half mortised on swing or slidingdoors!
Slimline
Endurance Tested to 5 Million Cycles
All productsthis page 10C
7/16"
Drop Bar with Nylon Brush - Use suffix “WH”
1"Max.Drop
1 3
/4"
Brass Housing.035"
19/32"Brassneoprene (1, 2)221NBRsilicone (1, 2)221SBR
nylon brush (2)221WHBR
Stainless Steelneoprene (1, 2)221NSS silicone (1, 2)221SSS
nylon brush (2)221WHSS
Brass orStainlessHousing
1"Max.Drop
2 1
/2"
19/32"
Brass or
StainlessSteelHousing.035"
Brassneoprene (1, 2)229NBRsilicone (1, 2)229SBR
nylon brush (2)229WHBR
Stainless Steelneoprene (1, 2)229NSSsilicone (1, 2)229SSS
nylon brush (2)229WHSS
Brass and Stainless Steel
1. Lead insert available for radiation shield on special order.2. Door Bottom is handed. Right hand supplied as standard unless specified. Field reversible.
S
silicone & vinyl are grayneoprene is blackbrush is gray with mill finishand stainless steel; black withgold, DKB and brass
Automatic Door Bottoms - Surface
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Au
tom
atic
Do
or
Bo
tto
ms
- S
urf
ace
Automatic Door Bottoms - Surface
222N
Stocked Product36”,42”, 48”Aluminum, Dark Bronze
420N
Stocked Product36”, 48”Aluminum
680
Stocked Product36”, 48”Aluminum, Dark Bronze
320NStocked Product 36”, 48”Aluminum
335N
Stocked Product36”, 48”Aluminum
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
6 American Building Supply, Inc. 03/11
G 19
5/8"
3/16" 1/4
"
vinyl
3/16"
152S 152SA 152SB152SDKB
5/8"
7/32"
silicone
3/16"
155S 155SB155SDKB
3/4"
1/4"
vinyl
1/4"
156S 156SDKB
7/8"
5/1
6"
1/4
"
silicone
160S160SA 160SB160SDKB
7/8"
5/1
6"
1/4
"
silicone
161SA 161SDKB
7/8"
1/4
"
1/4"
silicone
162S162SA 162SB162SDKB
5/1
6"3/8"
silicone
7/8"
137SA 137SB137SDKB
silicone
.07 aluminum for military specs
All silicone seals this section
10C S
A - clear B - gold DKB - dark bronzeno suffix - milldense silicone is black(exception: 137 siliconeis gray)
Properties:• Synthetic rubber polymer: Polysiloxane• Excellent flexibility and memory• Flame resistant• Moisture resistant• Temperature range -100F to 525F, excellent flexibility at extreme temperatures• Not affected by UV, most cleaning chemicals• Recommended for areas using FM200 or Halon Fire Suppression Systems• BHMA Certified to ANSI A156.22 performance tests for Heat, Cold, Air Leakage
and Smoke Control
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished Screw holes slotted for adjustment
Silicone Seals
Dense Bulbs
5/8"
9/1
6"
1"284Q
Foam Seals
Kerf Application
Stock lengths: 36”, 48”, 96”, 120”
7/8"
3/1
6"
5/8"
184QA 184QB184QDKB
Q-lon, brown polyethylene liner, foam core
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Silico
ne P
erimeter S
ealsFo
am S
eals
G 19
5/8"
3/16" 1/4
"
vinyl
3/16"
152S 152SA 152SB152SDKB
5/8"
7/32"
silicone
3/16"
155S 155SB155SDKB
3/4"
1/4"
vinyl
1/4"
156S 156SDKB
7/8"
5/1
6"
1/4
"
silicone
160S160SA 160SB160SDKB
7/8"
5/1
6"
1/4
"
silicone
161SA 161SDKB
7/8"
1/4
"
1/4"
silicone
162S162SA 162SB162SDKB
5/1
6"3/8"
silicone
7/8"
137SA 137SB137SDKB
silicone
.07 aluminum for military specs
All silicone seals this section
10C S
A - clear B - gold DKB - dark bronzeno suffix - milldense silicone is black(exception: 137 siliconeis gray)
Properties:• Synthetic rubber polymer: Polysiloxane• Excellent flexibility and memory• Flame resistant• Moisture resistant• Temperature range -100F to 525F, excellent flexibility at extreme temperatures• Not affected by UV, most cleaning chemicals• Recommended for areas using FM200 or Halon Fire Suppression Systems• BHMA Certified to ANSI A156.22 performance tests for Heat, Cold, Air Leakage
and Smoke Control
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished Screw holes slotted for adjustment
Silicone Seals
Dense Bulbs
5/8"
9/1
6"
1"284Q
Foam Seals
Kerf Application
Stock lengths: 36”, 48”, 96”, 120”
7/8"
3/1
6"
5/8"
184QA 184QB184QDKB
Q-lon, brown polyethylene liner, foam core
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Silico
ne P
erimeter S
ealsFo
am S
eals
G 19
5/8"
3/16" 1/4
"
vinyl
3/16"
152S 152SA 152SB152SDKB
5/8"
7/32"
silicone
3/16"
155S 155SB155SDKB
3/4"
1/4"
vinyl
1/4"
156S 156SDKB
7/8"
5/1
6"
1/4
"
silicone
160S160SA 160SB160SDKB
7/8"
5/1
6"
1/4
"
silicone
161SA 161SDKB
7/8"
1/4
"
1/4"
silicone
162S162SA 162SB162SDKB
5/1
6"3/8"
silicone
7/8"
137SA 137SB137SDKB
silicone
.07 aluminum for military specs
All silicone seals this section
10C S
A - clear B - gold DKB - dark bronzeno suffix - milldense silicone is black(exception: 137 siliconeis gray)
Properties:• Synthetic rubber polymer: Polysiloxane• Excellent flexibility and memory• Flame resistant• Moisture resistant• Temperature range -100F to 525F, excellent flexibility at extreme temperatures• Not affected by UV, most cleaning chemicals• Recommended for areas using FM200 or Halon Fire Suppression Systems• BHMA Certified to ANSI A156.22 performance tests for Heat, Cold, Air Leakage
and Smoke Control
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished Screw holes slotted for adjustment
Silicone Seals
Dense Bulbs
5/8"
9/1
6"
1"284Q
Foam Seals
Kerf Application
Stock lengths: 36”, 48”, 96”, 120”
7/8"
3/1
6"
5/8"
184QA 184QB184QDKB
Q-lon, brown polyethylene liner, foam core
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Silico
ne P
erimeter S
ealsFo
am S
eals
G 46
Solid Metal Astragals
1 5/8"
3/32"
139SSStainless steel astragal type 304 mill finish #2B Optional finishes: Polished (US32, 629) suffix “POL”
Brushed (US32D, 630) suffix “Brushed”
2"
1/8"
139A Aluminum clear anodized139DKB Aluminum dark bronze 139BR Brass
2"
3/16"
3/1
6"
1 7/16"
jambdoor
15/16"1/8"
1392SP
Steel Security Astragal
10C
10C
Maximum height 120”#10-32 SNB’s furnished.
139SP- Steel Prime Coat
#10 x 3/4” SMS furnished.
#10 x 3/4” SMS furnished.
Furnished with #12 x 1 1/4” SMS. Can replace required metal astragalon wood or fire-rated metal doors. UL, Max gap between doors = 1/8”.Astragal must overlap gap and inactive door min. of 3/4”.
• Available lead-lined, suffix “LD”• Available with SNB, specify
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Ove
rlap
pin
g M
etal
Ast
raga
ls
G 45
123NA x 124A123NB x 124B123NDKB x124DKB
Interlocking Seals
123NA
124A
HEADJAMB
DOOR
3/4
"1
1/8
"
LOCK
JAMB
DOOR
.062"
3/4" 11/16"
123NA 121A
Neoprene
Not for hinge jamb applicationmaximum length 96”
123NA x 121A
neoprene .094"
1 5/8"
3/8"
3/8"
3/16"
5/8"
neoprene
15/16"
1 5/8"
9/32"
silicone
109NA109NB109NDKB
114NA114NB114NDKB
178SA178SDKB
Overlapping Astragals
#6 x 1 - #6 X 3/4” ” stainless steel SMSfurnished.
1 3/8"
3/4
"1/4
"1/8"
158NA neoprene158NDKB neoprene
158SA silicone158SDKB silicone
158VA vinyl158VDKB vinylMaximum Height 120”
silicone
114SA114SB114SDKB
Maximum height 120”#10 X 3/4” ” SMS furnished.
Fits beveled edge doors.#10 X 3/4” ” SMS furnished.
1/2
"
1 1/8"
1 3
/16"
neoprene
148NA148NDKB
1 1/8"
7/8
"
1/8"176A176DKB
Maximum height 120”
Fits square edge doors#10 X 3/4” ” SMS furnished.
Fits square edge doors.#10 X 3/4” ” SMS furnished.
A - clearB - goldDKB - dark bronze vinyl is grayneoprene, silicone are black
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Overlap
pin
g Astragals
Interlo
cking S
eals
G 45
123NA x 124A123NB x 124B123NDKB x124DKB
Interlocking Seals
123NA
124A
HEADJAMB
DOOR
3/4
"1
1/8
"
LOCK
JAMB
DOOR
.062"
3/4" 11/16"
123NA 121A
Neoprene
Not for hinge jamb applicationmaximum length 96”
123NA x 121A
neoprene .094"
1 5/8"
3/8"
3/8"
3/16"
5/8"
neoprene
15/16"
1 5/8"
9/32"
silicone
109NA109NB109NDKB
114NA114NB114NDKB
178SA178SDKB
Overlapping Astragals
#6 x 1 - #6 X 3/4” ” stainless steel SMSfurnished.
1 3/8"
3/4
"1/4
"
1/8"
158NA neoprene158NDKB neoprene
158SA silicone158SDKB silicone
158VA vinyl158VDKB vinylMaximum Height 120”
silicone
114SA114SB114SDKB
Maximum height 120”#10 X 3/4” ” SMS furnished.
Fits beveled edge doors.#10 X 3/4” ” SMS furnished.
1/2
"
1 1/8"
1 3
/16"
neoprene
148NA148NDKB
1 1/8"
7/8
"
1/8"176A176DKB
Maximum height 120”
Fits square edge doors#10 X 3/4” ” SMS furnished.
Fits square edge doors.#10 X 3/4” ” SMS furnished.
A - clearB - goldDKB - dark bronze vinyl is grayneoprene, silicone are black
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Overlap
pin
g Astragals
Interlo
cking S
eals
National Guard ProductsSilicone Perimeter Seals
156S (Pemko 297)
Stocked Product 36” x 84”, 72” x 84”, 84” (set of 2), 96” (set of 2)Aluminum, Dark Bronze
160S (Pemko 303)
Stocked Product 36” x 84”, 72” x 84”, 84” (set of 2), 96” (set of 2)Aluminum, Dark Bronze
Overlapping Metal Astragals
139SP (Pemko 357)
Stocked Product84”, 96” Steel Prime
158S Silicone (Pemko 355)
Stocked Product84”, 96”, 108”Aluminum, Dark Bronze
176 (Pemko 359)
Stocked Product84”Aluminum, Dark Bronze
G 19
5/8"
3/16" 1/4
"
vinyl
3/16"
152S 152SA 152SB152SDKB
5/8"
7/32"
silicone
3/16"
155S 155SB155SDKB
3/4"
1/4"
vinyl
1/4"
156S 156SDKB
7/8"
5/1
6"
1/4
"
silicone
160S160SA 160SB160SDKB
7/8"
5/1
6"
1/4
"
silicone
161SA 161SDKB
7/8"
1/4
"
1/4"
silicone
162S162SA 162SB162SDKB
5/1
6"3/8"
silicone
7/8"
137SA 137SB137SDKB
silicone
.07 aluminum for military specs
All silicone seals this section
10C S
A - clear B - gold DKB - dark bronzeno suffix - milldense silicone is black(exception: 137 siliconeis gray)
Properties:• Synthetic rubber polymer: Polysiloxane• Excellent flexibility and memory• Flame resistant• Moisture resistant• Temperature range -100F to 525F, excellent flexibility at extreme temperatures• Not affected by UV, most cleaning chemicals• Recommended for areas using FM200 or Halon Fire Suppression Systems• BHMA Certified to ANSI A156.22 performance tests for Heat, Cold, Air Leakage
and Smoke Control
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished Screw holes slotted for adjustment
Silicone Seals
Dense Bulbs
5/8"
9/1
6"
1"284Q
Foam Seals
Kerf Application
Stock lengths: 36”, 48”, 96”, 120”
7/8"
3/1
6"
5/8"
184QA 184QB184QDKB
Q-lon, brown polyethylene liner, foam core
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Silico
ne P
erimeter S
ealsFo
am S
eals
G 19
5/8"
3/16" 1/4
"
vinyl
3/16"
152S 152SA 152SB152SDKB
5/8"
7/32"
silicone
3/16"
155S 155SB155SDKB
3/4"
1/4"
vinyl
1/4"
156S 156SDKB
7/8"
5/1
6"
1/4
"
silicone
160S160SA 160SB160SDKB
7/8"
5/1
6"
1/4
"
silicone
161SA 161SDKB
7/8"
1/4
"
1/4"
silicone
162S162SA 162SB162SDKB
5/1
6"3/8"
silicone
7/8"
137SA 137SB137SDKB
silicone
.07 aluminum for military specs
All silicone seals this section
10C S
A - clear B - gold DKB - dark bronzeno suffix - milldense silicone is black(exception: 137 siliconeis gray)
Properties:• Synthetic rubber polymer: Polysiloxane• Excellent flexibility and memory• Flame resistant• Moisture resistant• Temperature range -100F to 525F, excellent flexibility at extreme temperatures• Not affected by UV, most cleaning chemicals• Recommended for areas using FM200 or Halon Fire Suppression Systems• BHMA Certified to ANSI A156.22 performance tests for Heat, Cold, Air Leakage
and Smoke Control
#6 x 3/4” Stainless Steel Sheet Metal Screws furnished Screw holes slotted for adjustment
Silicone Seals
Dense Bulbs
5/8"
9/1
6"
1"284Q
Foam Seals
Kerf Application
Stock lengths: 36”, 48”, 96”, 120”
7/8"
3/1
6"
5/8"
184QA 184QB184QDKB
Q-lon, brown polyethylene liner, foam core
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Silico
ne P
erimeter S
ealsFo
am S
eals
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
03/11 American Building Supply, Inc. 7
Gasketing
G 9
9750, 9850 Intumescent with TPE Fire and SmokeSeal
20, 45, 60, 90 Minute rated category B wood doors perimeter application up to:
single swing 4’0 x 9’0 pairs 8’0 x 9’0
9850B Brown9850C Charcoal9850W White
Available in 36”, 48”, 84”, 96” and 108” lengths10C
ESS
1/8” clearance required between door and frame
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
S
9500 x 2525 or 9500 x 5020 NGP-Edge® Fire Seal x SmokeSeal
20, 45, 60, 90 Minute rated category Bwood doors perimeter application up to:single swing 4’0 x 9’0 pairs 8’0 x 9’0
intumescent
1 9/16"5/64"
7/16"
Available in 36”, 48”, 84”, 96” and 108” lengths
intumescent
1 9/16"5/64"1/4"
9500DKB x 2525B Brown9500 x 2525B Gray x Brown9500 x 2525W Gray x White,
9500DKB x 5020B Brown9500 x 5020B Gray x Brown
10C S
ESS
9750B Brown9750C Charcoal9750W White
Available in 36”, 48”, 84”, 96” and 108” lengths
1/2"
1/4"
1/2"
3/16"
1/8” clearance required between door and frame
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
Combination NGP-Edge® Sealing SystemSmoke and Draft Control Gasketing - Category ‘G’ and ‘H’ Listed
Available in 36”, 48”, 84” 96” and 108” lengths
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
NG
P-E
dge
®S
ealing S
ystems/S
mo
ke & D
raft Co
ntro
l Gasketin
g
G 9
9750, 9850 Intumescent with TPE Fire and SmokeSeal
20, 45, 60, 90 Minute rated category B wood doors perimeter application up to:
single swing 4’0 x 9’0 pairs 8’0 x 9’0
9850B Brown9850C Charcoal9850W White
Available in 36”, 48”, 84”, 96” and 108” lengths10C
ESS
1/8” clearance required between door and frame
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
S
9500 x 2525 or 9500 x 5020 NGP-Edge® Fire Seal x SmokeSeal
20, 45, 60, 90 Minute rated category Bwood doors perimeter application up to:single swing 4’0 x 9’0 pairs 8’0 x 9’0
intumescent
1 9/16"5/64"
7/16"
Available in 36”, 48”, 84”, 96” and 108” lengths
intumescent
1 9/16"5/64"1/4"
9500DKB x 2525B Brown9500 x 2525B Gray x Brown9500 x 2525W Gray x White,
9500DKB x 5020B Brown9500 x 5020B Gray x Brown
10C S
ESS
9750B Brown9750C Charcoal9750W White
Available in 36”, 48”, 84”, 96” and 108” lengths
1/2"
1/4"
1/2"
3/16"
1/8” clearance required between door and frame
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
Combination NGP-Edge® Sealing SystemSmoke and Draft Control Gasketing - Category ‘G’ and ‘H’ Listed
Available in 36”, 48”, 84” 96” and 108” lengths
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
NG
P-E
dge
®S
ealing S
ystems/S
mo
ke & D
raft Co
ntro
l Gasketin
g
G 10
9800 Intumescent Fire Seal
Perimeter Application:
20, 45, 60 Minute rated category B wood doors up tosingle swing 4’0 x 9’0 pairs 8’0 x 9’0
Meeting Edge Application up to 8’0 x 9’0 pairs of category B wood doors:
20 Minute rated with single strip installed
45, 60 Minute rated with two strips installed.
1/2"
1/16"
5/8"
1/16"
ESS
9890 Intumescent Fire Seal
90 Minute rated category B wood doors perimeter application up to:
single swing 4’0 x 9’0 standard pair 8’0 x 9’0
ESS
ESS
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
9800B Brown9800C Charcoal9800W White
Intumescent with Protective Skin
Available in 17’, 21’ and 150’ rolls
10C
9890C Charcoal
Intumescent with Protective Skin
Available per foot as required
10C
NGP-Edge® Sealing Systems - Category ‘G’ Listed
NGP Intumescent materials are formulated to expand at 375oF to 400oF up to 8-10 timestheir original thickness; completely sealing the gap around and between doors during a fire.
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
NG
P E
dge
®S
eali
ng
Sys
tem
s
ESS
G 10
9800 Intumescent Fire Seal
Perimeter Application:
20, 45, 60 Minute rated category B wood doors up tosingle swing 4’0 x 9’0 pairs 8’0 x 9’0
Meeting Edge Application up to 8’0 x 9’0 pairs of category B wood doors:
20 Minute rated with single strip installed
45, 60 Minute rated with two strips installed.
1/2"
1/16"
5/8"
1/16"
ESS
9890 Intumescent Fire Seal
90 Minute rated category B wood doors perimeter application up to:
single swing 4’0 x 9’0 standard pair 8’0 x 9’0
ESS
ESS
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
Self-AdhesiveNote: Shelf life of adhesive prior to installation is one year
9800B Brown9800C Charcoal9800W White
Intumescent with Protective Skin
Available in 17’, 21’ and 150’ rolls
10C
9890C Charcoal
Intumescent with Protective Skin
Available per foot as required
10C
NGP-Edge® Sealing Systems - Category ‘G’ Listed
NGP Intumescent materials are formulated to expand at 375oF to 400oF up to 8-10 timestheir original thickness; completely sealing the gap around and between doors during a fire.
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
NG
P E
dge
®S
eali
ng
Sys
tem
s
ESS
G 12
5050 Silicone Bulb Fire and Smoke Seal
Edge Sealing System - Category “G” for 20 minute rated category B wood doors perimeter application up to:single swing 4’0 x 8’0pairs 8’0 x 8’0use 9550 at the meeting edge of pairs
Up to 3 hours steel fire doors Up to 1 1/2 hours wood fire doors
Meets requirements of ROHS Directive 2002/95/EC
1/2"
1/4"
5050B Brown5050C Charcoal5050W White5050T Tan5050CL Clear
Available in 17’, 20’, 21’, 25’, and 300’ rolls
10C S
ESS
Closed cell sponge strip 1-1/8" wide x 3/32" thick withan adhesive strip for mounting directly to the face ofthe mullion that doors close against.
Available in 86" and 96" lengths.
Mullion
Door
Door
3/32"
1 1/8"
10C
DOOR DOOR
LATCH SIDE HINGE SIDE
width thickness361 21’ rolls 3/8” x 3/16”362 21’ rolls 1/2” x 1/4”
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
1/16"
1/1
6"
Seal for Mullion Applications Neoprene Sponge Self-Adhesive Gasketing
Combination NGP-Edge® Sealing SystemSmoke and Draft Control Gasketing - Category ‘G’ and ‘H’ Listed
Self-AdhesiveNote: See adhesive specifications on next page
5100N Neoprene (black)5100S Silicone (gray)
Self-AdhesiveNote: See adhesive specifications on next page
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Mu
llio
n S
eal
NG
P E
dge
®S
eali
ng
Sys
tem
s/S
mo
ke &
Dra
ft C
on
tro
l G
aske
tin
g
G 12
5050 Silicone Bulb Fire and Smoke Seal
Edge Sealing System - Category “G” for 20 minute rated category B wood doors perimeter application up to:single swing 4’0 x 8’0pairs 8’0 x 8’0use 9550 at the meeting edge of pairs
Up to 3 hours steel fire doors Up to 1 1/2 hours wood fire doors
Meets requirements of ROHS Directive 2002/95/EC
1/2"
1/4"
5050B Brown5050C Charcoal5050W White5050T Tan5050CL Clear
Available in 17’, 20’, 21’, 25’, and 300’ rolls
10C S
ESS
Closed cell sponge strip 1-1/8" wide x 3/32" thick withan adhesive strip for mounting directly to the face ofthe mullion that doors close against.
Available in 86" and 96" lengths.
Mullion
Door
Door
3/32"
1 1/8"
10C
DOOR DOOR
LATCH SIDE HINGE SIDE
width thickness361 21’ rolls 3/8” x 3/16”362 21’ rolls 1/2” x 1/4”
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
1/16"
1/1
6"
Seal for Mullion Applications Neoprene Sponge Self-Adhesive Gasketing
Combination NGP-Edge® Sealing SystemSmoke and Draft Control Gasketing - Category ‘G’ and ‘H’ Listed
Self-AdhesiveNote: See adhesive specifications on next page
5100N Neoprene (black)5100S Silicone (gray)
Self-AdhesiveNote: See adhesive specifications on next page
National Guard Products, Inc.The products you count on.The people you trust.
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Mu
llio
n S
eal
NG
P E
dge
®S
eali
ng
Sys
tem
s/S
mo
ke &
Dra
ft C
on
tro
l G
aske
tin
g
Up to 3 hours steel fire doorsUp to 1 1/2 hours wood fire doors
Edge Sealing System - Category “G”for 20 minute rated category Bwood doors perimeter application up to:single swing 4’0 x 8’0pairs 8’0 x 8’0use 9550 at the meeting edge of pairs
2525B Brown2525C Charcoal2525W White2525T Tan
5021B Brown5021C Charcoal5021W White
5020B Brown5020C Charcoal5020W White
G 13
Self-Adhesive Gasketing
Adhesive specifications: Acrylic pressure sensitive adhesive protected by polyethylene release liner. Provides high initial adhesion and
long term holding power for permanent mounting in exterior or interior locations. Resistant to aging, weathering, UV radiation,
water, detergent, alcohol and the influence of chemicals. End use temperature range is -40oF up to 250
oF. Shelf life of adhesive prior
to installation is one year when stored at 40oF to 80
oF and 60% relative humidity or less.
1/4"
3/8"
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
1/16"
1/1
6"
Available in 17’, 20’, 21’, 25’ and 300’ rolls.
silicone
10C SAvailable in 36”, 48”, 84”, 96” and 108” lengths.
7/16"
7/16"
11/32"
7/16"
7/16"
Kerf Application
10C S
TPE
Available in 17’, 20’, 25’, 300’ rolls
1/2"
5/16"
5040B Brown5040W White
HEAD &LATCH SIDE
DOOR
JAMB
HINGE SIDE
JAMB
10C S
silicone
5/16"
1/2"
Available in 7’, 8’, 9’, 17’, and 21’ rolls.
10C S
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
(optional astragal
application)
silicone
TPE
5060B Brown5060CL Clear
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Self-A
dh
esive Gasketin
g
Adhesive specifications: Acrylic pressure sensitive adhesive protected by polyethylene release liner. Provides high initial adhesion andlong term holding power for permanent mounting in exterior or interior locations. Resistant to aging, weathering, UV radiation,water, detergent, alcohol and the influence of chemicals. End use temperature range is -40˚F up to 250˚F. Shelf life of adhesive priorto installation is one year when stored at 40˚F to 80˚F and 60% relative humidity or less.
National Guard Products
9850 (Pemko HSS2000 x S44)
Stocked Product18’, 21’, 25’Black
9800 (Pemko HSS2000)
Stocked Product17’, 21’Bronze, White
5050 (Pemko S88)
Stocked Product17’, 21’, 25’Brown, White
Silicone Bulb Fire and Smoke Seal
2525B Brown2525C Charcoal2525W White2525T Tan
5021B Brown5021C Charcoal5021W White
5020B Brown5020C Charcoal5020W White
G 13
Self-Adhesive Gasketing
Adhesive specifications: Acrylic pressure sensitive adhesive protected by polyethylene release liner. Provides high initial adhesion and
long term holding power for permanent mounting in exterior or interior locations. Resistant to aging, weathering, UV radiation,
water, detergent, alcohol and the influence of chemicals. End use temperature range is -40oF up to 250
oF. Shelf life of adhesive prior
to installation is one year when stored at 40oF to 80
oF and 60% relative humidity or less.
1/4"
3/8"
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
1/16"
1/1
6"
Available in 17’, 20’, 21’, 25’ and 300’ rolls.
silicone
10C SAvailable in 36”, 48”, 84”, 96” and 108” lengths.
7/16"
7/16"
11/32"
7/16"
7/16"
Kerf Application
10C S
TPE
Available in 17’, 20’, 25’, 300’ rolls
1/2"
5/16"
5040B Brown5040W White
HEAD &LATCH SIDE
DOOR
JAMB
HINGE SIDE
JAMB
10C S
silicone
5/16"
1/2"
Available in 7’, 8’, 9’, 17’, and 21’ rolls.
10C S
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
(optional astragal
application)
silicone
TPE
5060B Brown5060CL Clear
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Self-A
dh
esive Gasketin
g
2525 (Pemko PK33)
Stocked Product17’, 20’, 25’Black, White, Bronze
Self-Adhesive Gasketing
5040 (Pemko S44)
Stocked Product 17’, 21’, 25’Bronze, White
2525B Brown2525C Charcoal2525W White2525T Tan
5021B Brown5021C Charcoal5021W White
5020B Brown5020C Charcoal5020W White
G 13
Self-Adhesive Gasketing
Adhesive specifications: Acrylic pressure sensitive adhesive protected by polyethylene release liner. Provides high initial adhesion and
long term holding power for permanent mounting in exterior or interior locations. Resistant to aging, weathering, UV radiation,
water, detergent, alcohol and the influence of chemicals. End use temperature range is -40oF up to 250
oF. Shelf life of adhesive prior
to installation is one year when stored at 40oF to 80
oF and 60% relative humidity or less.
1/4"
3/8"
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
1/16"
1/1
6"
Available in 17’, 20’, 21’, 25’ and 300’ rolls.
silicone
10C SAvailable in 36”, 48”, 84”, 96” and 108” lengths.
7/16"
7/16"
11/32"
7/16"
7/16"
Kerf Application
10C S
TPE
Available in 17’, 20’, 25’, 300’ rolls
1/2"
5/16"
5040B Brown5040W White
HEAD &LATCH SIDE
DOOR
JAMB
HINGE SIDE
JAMB
10C S
silicone
5/16"
1/2"
Available in 7’, 8’, 9’, 17’, and 21’ rolls.
10C S
HEAD &LATCH SIDE
DOORJAMB
HINGE SIDE
DOORJAMB
(optional astragal
application)
silicone
TPE
5060B Brown5060CL Clear
G A S K E T I N G
N AT I O N A L G U A R D P R O D U C T S , I N C .
Phone: 800-647-7874Fax: 800-255-7874
www.ngp.com
Self-A
dh
esive Gasketin
g
ABS-AmericAn Building Supply, inc.ABS-AmericAn Building Supply, inc.
8 American Building Supply, Inc. 03/11