gautam buddha university for equipment of engineerin… · gautam buddha university ... tender bid...

Gautam Buddha University (Established by the Uttar Pradesh Gautam Buddha University Act 2002

UP Act No. 9 of 2002, passed by the Uttar Pradesh Legislature)

Greater Noida – 201 312, Ph. 0120-2344200 Website : www.gbu.ac.in

TENDER BID : EQUIPMENT FOR ENGINEERING WORKSHOP (GBU/S&P/04/2016 dt. 24.06.2016)

BID FORM

FOR THE SUPPLY / INSTALLATION OF EQUIPMENT FOR

ENGINEERING WORKSHOP_SoE

http://www.gbu.ac.in/





Tender SUPPLY/INSTALLATION OF EQUIPMENT FOR

ENGINEERING WORKSHOP, SCHOOL OF ENGINEERING

Opening Date of Bid 24th June 2016

Closing Date & Time of Bid 8th July 2016 upto 3.00 p.m.

Last date & Time of Bid

Submission

8th July 2016 upto 3.30 p.m..

Technical Bid Opening

Date, Time & Place

8th July 2016 at 04.00 p.m.

Venue : Conference Room of the Registrar Office, 1st Floor,

Administrative Building, G.B.U., Gr. Noida.

(Bidder/authorized representative of bidders may attend the

bid opening proceedings on the above mentioned day and

time).

Earnest Money Deposit

Tender Fee

2% of total quoted value of annex. A to C - (Refundable)

Rs.1050.00 (One Thousand Fifty) - (Non-refundable)

Completion Period Within 6 weeks from the date of Purchase Order issued

Bid System Two Tier : 1) Technical Bid 2) Financial Bid

Technical Bid Shall

Contain

i. Technical specifications of each equipment quoted ii. All documents in support of commercial terms &

conditions and eligibility criteria. iii. Bidders Proforma with Complete Tender set. iv. EMD in form of FDR/BG only

v. Tender Fee in form of demand drafts / pay orders.

Financial Bid The Financial Bid shall contain rate schedule only. The price

shall be in words as well as in numeric numbers.






“TECHNICAL BID (BIDDER’S PROFORMA)”

(To be submitted in separate envelope)

Name of the Organization

Pl. mentioned whether a Government Company /

Public Ltd. / Private Ltd. / Partnership /

Proprietorship

Date of incorporation/registration (pl. enclose

photocopy of cert.)

Specify the number of years in this line of activity by

the company

PAN/TIN registration No. (pl. enclose photocopy of cert.)

Service Tax, Sales Tax/VAT registration No. (pl. enclose photocopy of cert.)

Provide the postal address, telephone & fax

numbers, and email address of the nearest

service center.

Are you the manufacturer / authorized dealer / distributor/ retailer for the product quoted (please attached relevant certificate):

Mention delivery period from the date of the placement of an official purchase order

Whether technical specification are attached with Technical Bid or not.






Deviations in specifications, if yes, please mention

in separate sheet.

Turnover in the last three financial years (Figures should be in Indian Rupees in Lakhs; please attach the certified copies of balance sheet with trading, profit & loss account.

2012-13 2013-14

2014-15

Detail of the similar items supplied / installed / maintained during last three financial

years at IITs, NIT’s or Central / State Universities / Organization / any Academic Institute

of National Repute / Reputed private organizations etc.

(Please enclose Performance Certificates & Purchase Orders)

Name of the

item(s)

P.O. Value (Rs.) Completion

value (Rs.)

Name of the Institution / organization with

name and designation of contact person

including phone and email id.

Whether your firm has been blacklisted by any

Government Organization including Universities,

Institutions and Colleges during last three

financial years.

(Yes / No)






DECLARATION

I/We hereby declare that the information given in the technical bid by the undersigned is correct

and fulfill all conditions as published in the tender document.

(SIGNATURE OF THE BIDDER)

WITH SEAL

NAME: ………………………………………………………………..

ADDRESS :……………………………………………………………

Tel./Mobile No.: …...................................................................................

Email ID : ……………………………………………………………………….






TECHNICAL SPECIFICATIONS OF EQUIPMENT FOR ENGINEERING WORKSHOP

ANNEXURE - A

1. MACHINE SHOP

Sl. No. Name of Equipments Technical Specifications Qty

1 Bench grinder H.P – 1.00, Wheel Size (Dia x Width x Bore) – 200 x

25 x 25.40, Spindle (RPM) – 2800

01

2 Power hacksaw Stroke- 5.75”, blade size- 16x1.25”, capacity of

round bar- 8”, capacity of S.Q. Bar- 6”, No. of strokes

per minute- 80-100-120, Electric motor required

(1440 RPM)- 1HP, L x W x H- 49” x 30” x 32”,

weight- 500 kg, packing Box size- 55” x 31” x 38”.

01

3 Vernier calipers (Outside

–inside and depth

measurement) - non-

digital

Range 0-300 mm or higher , Accuracy ±0.05 mm or

better, with fine adjustment

06

4 Vernier calipers (Outside

–inside and depth

measurement) – Digital

Range 0-150 mm , Accuracy ±0.02 mm or better, With Thumb roller

04

5 Micrometer outside

(non-digital)

Range 0-25 mm, Accuracy 0.004 mm, carbide tips.

06

6 Micrometer outside

(Digital)

Range 0-25 mm , Accuracy 0.004 mm, carbide tips.

04

7 Vernier Height gauge -

Digital

Range 0-250 mm, Accuracy ± 0.01 mm, 5 buttons

with data output

02

8 Universal vice Jaw width 150 mm, width opening 150 mm 02

9 Inside Spring calipers set Range 0-100 mm

8

10 Outside Spring calipers

set

Range 0-100 mm

8

11 Surface plate with stand Approximately 3x3 feet 01







12 Machine tools-turning,

boring, threading,

knurling, power saw

blade, reamers, milling

cutters, tool kit etc.(for

all machine tools)

Sandvik® or equivalent As per

machine

tool.

(3 set

each)

2. FITTING SHOP


1 Hammer (All Types) Taparia® or equivalent make (set) 10

Each

(4 types)

2 Center punch Taparia® or equivalent make 5

3 V-block Length 100 x Height 75 mm, Clamping Capacity 5-

60 mm

06

4 Vernier Depth gauge Range 0-250 mm or higher, Accuracy ±0.05mm. 02

5 Bevel protector Mitutoyo® or equivalent make, 02

6 Threading punch holder

with set of dies

40 pieces metric tap and die set 01

3. WELDING SHOP

Sl. No. Name of Equipments Technical Specifications Quantity

1 Oxy-acetylene gas

welding set equipment

with regulator and other

accessories*.

i)Acetylene Regulator – Double state

ii) Oxygen Regulator – Double stage iii) Hose pipe –

(Red) for acetylene diameter 08mm, length 5 m

iv) Hose pipe – ( Black or Blue) for acetylene

diameter 08mm, length 5 m

v) Gas welding torch – 2HP (High pressure),with 6

no’s Nozzles vi) Hose connection (Non Return

Valve)- required Hose Pipe.

vii) Hose Clip – required Hose Pipe

viii) Flash back arrestors for Acetylene and Oxygen

01






Sl. No. Name of Equipments Technical Specifications Quantity

Regulator/Hose pipe purpose 01 no each.

ix) Tip cleaner 01 no

x) Acetylene cylinder 45 Kg capacity

xi) Oxygen cylinder 45 Kg capacity.

* All accessories should be ISI Standard.


3 Heavy duty (ordinary

vices)

Jaw length 6” and opening 9” with clamping bolts 06

4 Flat tongs 12 inch long, 06

5 Goggles ISI / AWS grade 12

6 Eye shield ISI / AWS grade 06

7 Hand gloves Leather, ISI / AWS grade 12

8 Apron Leather, ISI / AWS grade 06

9 Steel wire brush SS wire strands on SS base 12

10 Head shield ISI / AWS grade 12

4. FOUNDRY SHOP


1 Metal Melting crucible Graphite crucible for volumes of aluminum with 3

Kg weight.

10

2 Sand pot Container to house 20 Kg molding Sand 01

3 Hand shovel Taparia or equivalent make ® make 06

4 Peen hammer 500 gms weight with wooden handle 06

5 Flat hammer 1 Kg Weight with wooden handle 06

5. SMITHY SHOP







1 Hand hammer 1 Kg weight with handle 02

2 Tongs 1 feet long 02

3

Inside Spring calipers set Range 0-100 mm

6

4

Outside Spring calipers

set

Range 0-100 mm

6

5

Vernier calipers (Outside

–inside and depth

measurement) - non-

digital

Range 0-300 mm or higher , Accuracy ±0.05 mm or

better, with fine adjustment

06

6 Black smith gauge Mitutoyo® or equivalent make 02

6. SHEET METAL WORKING SHOP


1 Bench shear Medium size, blade length 1 feet 01

2 Universal vice Jaw width 150 mm, width opening 150 mm 01

3 Mallet 1 kg Plastic with handle 06







7. CARPENTRY SHOP


1

Planning machine

(wooden)

Electrically operated (medium size) 1

2 Carpentry vice Jaw width 9 inches 06

3

All wood working cutting

(all types wood working

chisels, wood working

files, saws, hammers ------

-) & measuring tools 8

tools of each type

Taparia® or equivalent make






Annexure B


1 Shaper / Shaping

machine

Hydraulic

Length of Ram stroke- 457 mm, length of Ram- 914 mm,

Length x Width of Ram Bearing- 711 x 245 mm, Max/

Min distance of table from Ram- 406/89, working

surface from table- 381/279 mm, Max. horizontal table

travel- 457 mm, Max. vertical table travel- 305 mm,

angular movement of table- +60 DEG, Max. tool shank

size- 30 x 16 mm, max. vertical travel of tool slide- 152

mm, max. swivel of tool head- +- 60 DEG, diameter of

clutch pulley- 311, number of Ram speed/ strokes- 4,

range of ram stroke per min.- 17 to 75, diameter of

motor pulley- 76 mm, range of table feed/ stroke- ,

tool head feed- hand feed, main motor drive 960 Rpm- 2

H.P, V- Belt section- B-55, motor starter- 3.5 Amp,

length- 1580 mm, width- 948 mm.

01

2 Pillar Type Drilling

Machine

Drilling capacity in Steel -32mm Tapping capacity in Steel – 16 mm Morse Taper in Spindle – MT 3 Spindle Traverse – 140mm Spindle Sleeve - Steel Pillar diameter - 120 mm Max. dist. spindle & table - 610 mm Max. dist. spindle & base - 1080 mm Table working surface - 335 mm (dia.) Base working surface 318 – 300 mm Power/ speed of Motor(std.)/rpm – 2 HP / 1440 Std. spindle speeds range rpm - 100-140-210-310-

460-600-860-1260-1850-2720 Range of feed mm/rev. - 0.1, 0.2, 0.3 No. of feeds / type - 3 / Auto-feed Type of drive – belt Space requirement mm3 - 850x600x2080

01






Annexure C

Sl. No. Name of Machine Technical Specifications Qty

1 Hydraulic Press Brand rolled steel plate fabricated, hydraulic deep drawing

Press machine with die-cushioning system, power operated,

Complete with power pack unit, motor & jack (fitted with machine), &equipped with suitable electrical for 400/440v, 3 phase, 50 Hz ac mains, but without first fill of hydraulic oil.

Machine configuration: Version: hydraulic deep drawing press. Tonnage capacity: 30 Tons Die-cushion capacity: 15 Ton Bed size: 650 to 700 x 600 to 700 mm Ram area: 550 to 600 x 500 to 600 mm Distance between ram to bed: 500 to 600 mm Ram stroke length: 400 to 450 mm Die-cushion stroke: 40 to 60mm Die cushion pad size: 550 to 600 x 500 to 600

mm Speed approach / pressing / return:

40/8/55mm/sec. Weight: 4 to 5 ton (approx.). Compatible Dies

01






GENERAL TERMS AND CONDITIONS

1. Detailed information about the items and their specifications are available in tender document, which can be downloaded from the University website www.gbu.ac.in.

2. Two bids system of tender will be adopted.

(i) The bid containing technical specifications, EMD, Tender Fee and eligibility documents.

(ii) Bid containing financial offer.

Technical and financial bids should be submitted in separate covers. These two envelops shall be sealed in a common cover and addressed to The Registrar, Gautam Buddha University, Greater Noida, Gautam Budh Nagar-201312 (U.P.) superscribing “Tender against Notification Advt. GBU/S&P/04/2016 dt. 24.06.2016, Name of supply : Procurement of Equipment for Engineering Workshop_SoE” so as to reach us on or before last date of bid submission.

3. The Technical Bid and Financial Bid should be duly filled-up.

4. These bids will be opened in two stages. The bid containing technical specifications, EMD, TF and eligibility documents will be opened at first stage and if same is found according to required specifications, the bid containing financial offer shall be opened in second stage.

5. The “ Te c h nic al B id” shal l co nt ain all d ocum en ts in sup p ort of qu o ted i tem , their specifications, EMD, Tender Fee, terms & conditions and eligibility criteria along with the page number for cited specifications in the company brochure for the particular item.

6. The “Financial Bid” shall contain price schedule only. The rates and units shall not be overwritten in the price schedule. The price shall be both in words and figures.

7. Eligibility Criteria: All the participating suppliers/firms or principal manufacturer- should meet the following qualifying criteria. The firm should be a registered supplier for such supplies. Following documents are required to be submitted with Technical Bid, to qualify eligibility criteria:

a) PAN/TIN registration certificate (self attested). b) Service Tax/Sales Tax/VAT registration certificate (self attested). c) Earnest Money Deposit (EMD) in form of FDR/BG only pledged in favour of “Gautam

Buddha University” alongwith the Technical Bid. The FDR/BG should be valid for one year period. If supply is not made within the prescribed period EMD would be forfeited.

d) Tender Fee in form of DD/Pay Order in favour of “Gautam Buddha University” alongwith the Technical Bid.

e) Audited copy of balance sheet with trading, profit & loss account for the last three financial years should be submitted (self attested).







f) The firm/company should have experience of similar items supply & installation in institutes/organization of National repute, as mentioned above in bid proforma.

g) The bidder must be either sole Manufacturer of the tools or the authorized agent/representative of the OEM. In the case of agent/representative, certified copy of the agency/authorization issued by the OEM should be enclosed with the tender.

h) Authorized signatory should sign with rubber seal on all pages. Bids without authorized seal and signature will be rejected.

i) The vendor shall submit an affidavit (duly notarized) on Rs.10/- stamp paper to the effect that the firm has never been blacklisted by any Government organization including Universities, Institutions and Colleges.

8. Offer should be sent in a sealed envelope, submitted either in person or by post on which name and address of the supplier/firm shall be written. Tenders received through E- mails or FAX will not be considered.

9. The technical bids will be opened on scheduled date and time. Bidders/authorized representatives of the bidders intending to attend the tender opening should intimate in advance.

10. The rate quoted should be F.O.R. Gautam Buddha University (Gautam Budh Nagar, Greater Noida, UP) in rupees/foreign currency inclusive of all charges e.g. packing, forwarding local taxes, railway freight, transit insurance etc. The total price should include all accessories required for final installation of the item. Rates of imported goods should be quoted excluding custom duty, as this University is exempted from payment of custom duty (by letter of Department of Scientific and Industrial Research, Ministry of Science & Technology, GOI).

11. The items should have USEPA/International/National validation certificates, wherever applicable.

12. The cost of the tender is Rs.1050/- (Nonrefundable) and it shall be paid separately in the form of DD/Pay Order drawn in favour of “Gautam Buddha University” payable at “Delhi” and should be attached with technical bid envelope.

13. The EMD of the successful bidder will be refunded after getting the “Performance Security Deposit (i.e. 10% of PO/WO value)”. The Performance Security Deposit shall be deposited in the form of FDR/Bank Guaranty only, pledged in favour of “Gautam Buddha University” and should be valid for whole contract/warranty period. The PSD will be returned only after expiry of the successful contract/warranty period. The EMD of the unsuccessful bidders will be returned to the firm(s) immediately after finalization of the tenders. No interest will be paid on EMD in any case.

14. The Small Scale Units registered with National Small Industries Corporation (NSIC) are exempted from Tender Fee & EMD subject to provide a copy of registration certificate.

15. The required delivery period must be mentioned against each item. Tenders should preferably be given only for those equipments/items/articles, which are available ex- stock.

16. Detailed specifications with the mention of make and model/Version of each item should be clearly given supported by the illustrated pamphlets wherever possible. Quotations without specified make and Model/Version and other particulars may be rejected. The accessories included in the Equipments/Instruments should also be clearly mentioned.

17. Losses or damage in transit will be borne by the Supplier. The supplier may, if he so






desires, get the goods insured and include such charges in the tendered rate. 18. Offered prices should be valid for at least 180 days from the last date of receipt of

tenders. 19. (a) The items delivery time should be preferably within stipulated period mentioned in

purchase order, if fails

(b) The Penalty Clause is as under:-

Should the bidder fail to deliver the goods within stipulated period, the Competent Authority may, at his discretion, allow an extension in time subject to recovery from the bidder as agreed liquidated damages, and not by way of penalty, a sum equal to the percentage of the value of tender amount which the bidder has failed to supply for period of delay as stated below:-

i.Delay up to one week 1%

ii.Delay exceeding one week but not 2%

exceeding two weeks

iii.Delay exceeding two weeks but 5%

not exceeding one month

iv.Delay exceeding one month 5% for each month and part there of subject to maximum 10%

(c) In case of failure to supply the goods within stipulated delivery period and in accordance with the specifications given in the quotations, the University shall be free to cancel the order.

20. Supply of the placed order in part will not be accepted.

21. The University’s term for payment: 90% against delivery of items in good condition, installation and putting those in satisfactory working conditions; balanced 10% payment shall be released after 60 days of satisfactory working of the items. No advance payment shall be released..

22. No revision of price bid will be allowed once the price bids are opened. In case firm/company quoted in foreign currency the price will be converted into Indian Rupee at the conversion rate on the basis of the last day of the bid submission.

23. No increase in price will be allowed after our purchase order(s) are placed.

24. Warranty certificate against all the Items/Equipments/Instruments developed defects covering warranty period, which commences from the date of installation shall be given at the time of supply of the items.






25. Inspection certificates of the items inspected by the qualified engineer of the manufacturer and packed in accordance with the terms and conditions of this order must be enclosed.

26. During the warranty period whenever the firm is called upon to atten d to the rectification of the defects/faults in the consignments, the firm shall attend to the repair work within a period of a week. They should render timely back up service whenever called upon. A certificate to the effect should be attached to the tender.

27. A certificate to the effect that items supplied is fully operational and n o a d di ti o n a l acc e ss o ry o r s p ac e i s r e qui re d t o f ul ly f u nc ti o ni n g t h e Equipments/Instruments should be issued along with the delivery challans/invoice. GBU reserves the right to refuse payment in the event of not furnishing this certificate at the time of supply.

28. Complete user, technical and service manuals/installation drawings/documentation and spare parts catalogue are to be provided along with the supply of the item.

29. Failure to comply with all the terms and conditions mentioned herein would result in the tender being summarily rejected.

30. Vendors are informed that once the firms are shortlisted based on the eligibility criteria and technical specifications, only then the financial bids of the firms meeting eligibility criteria, technical specifications / requirements would be opened.

31. Conditional tenders will not be accepted. 32. Any cutting and overwriting in the financial bid will not be accepted. 33. GBU reserves the right to change the order quantity or split the orders among multiple

vendors without assigning any reason (s) whatsoever. 34. GBU reserves the right to reject any or all the tenders without assigning any reasons

whatsoever. 35. All legal proceedings, if necessity arises to the University may be any of the parties (University

or Contractor/Supplier) shall have to be lodged in the courts situated at Distt. Gautam Budh Nagar and not elsewhere.

Registrar Gautam Buddha University






ACCEPTANCE

I/We accept the above terms and conditions and shall comply with them strictly.

SIGNATURE OF THE BIDDER)

WITH SEAL

NAME: ………………………………………………………………..

ADDRESS :……………………………………………………………

Tel./Mobile No.: …...................................................................................

Email ID : ……………………………………………………………………….






FINANCIAL BID FOR ENGINEERING WORKSHOP LAB.

Annexure - A

1. MACHINE SHOP Sl. No. Name of Equipments Qty Make/Model

Quoted

Unit

Price

Gr. Total

1 Bench grinder 01

2 Power hacksaw 01

3 Vernier calipers (Outside –inside

and depth measurement) - non-

digital

06

4 Vernier calipers (Outside –inside

and depth measurement) – digital

04

5 Micrometer outside (non-digital) 06

6 Micrometer outside (digital) 04

7 Vernier Height gauge 02

8 Universal vice 06

9 Inside Spring calipers set 8

10 Outside Spring calipers set 8

11 Surface plate with stand 01

12 Machine tools-turning, boring,

threading, knurling, power saw

blade, reamers, milling cutters, tool

kit etc.(for all machine tools)

As per

machine

tool.

Taxes @ …………

Grand Total Cost (Rs.)






2. FITTING SHOP

Sl. No. Name of Equipments Qty Make/Model

Quoted

Unit

Price

Gr. Total

1 Hammer (All Types) 10

Each

2 Center punch 5

3 V-block 06

4 Vernier Depth gauge 02

5 Bevel protector 02

6 Threading die holder with set of

dies

01

7 Threading punch holder with set of

dies

01



3. WELDING SHOP


Quoted

Unit

Price

Gr. Total

1 Oxy-acetylene gas welding set

equipment with regulator and other

accessories*.

01

2 Surface Plate 01

3 Heavy duty (ordinary vices) 06

4 Flat tongs 06







Quoted

Unit

Price

Gr. Total

5 Goggles 12

6 Eye shield 06

7 Hand gloves 12

8 Apron 06

9 Steel wire brush 12

10 Head shield 12



4. FOUNDRY SHOP


Quoted

Unit

Price

Gr. Total

1 Induction furnace with

temperature controlled heating &

melting system for aluminum and

heat treatment for steel specimen

01

2 Metal Melting crucible 02



5 Bench Molding tables 02

6 Peen hammer 06

7 Flat hammer 06

8 Brush 06







Quoted

Unit

Price

Gr. Total

9 Cleaner for molds 06

10 Gate cutters 06



5. SMITHY SHOP Sl. No. Name of Equipments Qty Make/Model

Quoted

Unit

Price

Gr. Total

1 Hand hammer 02

2 Tongs 02

3 Inside Spring calipers set 6

4 Outside Spring calipers set 6

5

Vernier calipers (Outside –inside

and depth measurement) - non-

digital

06

6 Black smith gauge 02








6. SHEET METAL WORKING SHOP Sl. No. Name of Equipments Qty Make/Model

Quoted

Unit

Price

Gr. Total

1 Bench shear 01

2 Universal vice 01

3 Mallet 06

4 Surface plate 01



7. CARPENTRY SHOP Sl. No. Name of Equipments Qty Make/Model

Quoted

Unit

Price

Gr. Total

1 Planning machine 01

2 Carpentry vice 06

3

All wood working cutting (all types

wood working chisels, wood

working files, saws, hammers ------

-) & measuring tools

08 each



Total cost of the offer is Rs._______________ in words (Rupees _______________________________________

___________________________________________________________________________________________. I abide by all the

terms & conditions of the tender.


WITH SEAL







Annexure - B


Quoted

Unit

Price

Gr. Total

1 Shaper / Shaping machine

01

2 Pillar Type Drilling Machine

01




___________________________________________________________________________________________. I abide by all the



WITH SEAL

NAME: ………………………………………………………………..







Annexure - C

Sl. No. Name of Machine Qty Make/Model

Quoted

Unit Price Gr. Total

1 Hydraulic Press

01




___________________________________________________________________________________________. I abide by all the



WITH SEAL

NAME: ………………………………………………………………..






ACCEPTANCE

I/We accept the terms and conditions and shall comply with them strictly.

DECLARATION

1. The rates quoted are inclusive of all and F.O.R University Lab. site.

2. The information given in the financial bid by the undersigned is correct.


WITH SEAL

NAME: ………………………………………………………………..

ADDRESS :……………………………………………………………

Tel./Mobile No.: …...................................................................................

Email ID : ……………………………………………………………………….


gautam buddha university for equipment of engineerin… · gautam buddha university ... tender bid...

Documents