gcc 2-12-16
TRANSCRIPT
Meeting 10 – 2/12/16
Week by Week Semester Schedule
Each Week• Read Chapter Sections
• Watch YouTube Tutorial
• Build the Hardware
• Write the Code
• Test it/Troubleshoot
• Bring it and show us!
• Take Pictures/Video!
• **Alter the Code
Chapter-by-Chapter Content http://exploringarduino.com/content/
Video Tutorials https://www.youtube.com/playlist?list=PLA567CE235D39FA84
Chapter 1: Getting Up and Blinking with the Arduino
Chapter 1 Content
Full Chapter 1 Excerpt
Install Arduino IDE
Chapter 1: Getting Up and Blinking with the Arduino
Chapter 1: Getting Up and Blinking with the Arduino
Chapter 1: Getting Up and Blinking with the Arduino
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Breadboard
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
• Wiring LED with Breadboard
• Reading Digital Inputs: LED control
with a Button
• Bouncy Buttons
• Change LED Brightness• www.exploringarduino.com/content/ch2
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Wiring LED with Breadboard• LEDs allow current to flow from the anode (positive, longer
end) to the cathode(negative, shorter end).
• Anode connects to the current source (a 5V digital signal).
• Cathode connects to the ground.
• The resistor can be inserted in on either side of the LED.
• Resistors are not polarized, orientation does not matter
Chapter 2: Digital Inputs, Outputs, and Pulse-Width Modulation
Questions?
For next week:• Read Chapter 2: Digital Inputs, Outputs, and Pulse-Width
Modulation
• Complete all three Ch 2 projects
• *Additional: Watch the video tutorials - https://www.youtube.com/watch?v=_LCCGFSMOr4&list=PLA567CE235D39FA84&index=2
Happy Valentine's DayHave a fantastic long weekend!