gda/gsr pneumatic actuators technical data sheet · 2020. 1. 3. · 6 spring force pneumatic...

16
CR-TEC Engineering, Inc. GDA/GSR Pneumatic Actuators Technical Data Sheet

Upload: others

Post on 19-Sep-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

CR-TEC Engineering, Inc.GDA/GSR Pneumatic Actuators

Technical Data Sheet

Page 2: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

2

Objective

- A suitable rotary actuator is available for each application of shut-off valves due to 18 different sizes and torques from 2 to13.040 Nm.

- The high-quality powder coating of the cap and housing made of hard-coated aluminium allows the usage even in aggressiveenvironmental conditions.

- The solenoid valve interface is located high on the profile and easily accessible which optimizes the installation of pilot valves.

- The end position adjustment on the opposite side of the solenoid valve connection facilitates the adjustment process.

- The standardised interface VDI/VDE 3845 can be used to set up all commercially available signal and control devices.

- The position indicator is part of the product which is equipped with variable clips for displaying the valve position.

- The end positions can be configured between 0° and 90° as well as from + 5° to -5°, whereby the valve can be optimallyadjusted.

- There are 2 ISO flange patterns available for most of the sizes per each actuator size to ensure flexible automation of valves.

- The octagonal pinion connection adapts a parallel or diagonal selector shaft alignment of the valve and ensures a space-savingactuator construction.

- Simple assembly and disassembly of the safety springs which are designed for a balanced ratio between pneumatic torqueand spring torque.

- Each control pressure is assigned to a defined number of springs and facilitates the actuator selection based on the torques.

- A laser engraving on the actuator housing marks the flange patterns and air connections for a clear allocation.

- The serial number is also laser engraved; this helps to trace the actuator manufacturing at any time.

- Precisely milled piston tooth system ensures smoother running, optimum torque and low wear.

- A long service life is achieved by using the plain bearing for all moving parts.

- The actuators cover a wide range of applications thanks to the actuator variants with different swivel angles.

- A reduced stock level is achieved by using identical caps for single- and double-acting actuators.

With 40 years of experience in automation we are able to meet the current requirements of the valve market and we have developed a new pneumatic quarter-turn actuator for our diverse customer groups.

Thanks to its special design, robust construction and great versatility in technical characteristics, we fulfil the demands from the plant designer and plant manufacturer to the user.

This covers a very wide range of torque values and swivel angles.

Use

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 3: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

3

Technical data

Standard design Upon request

Construction type Pneumatic twin-piston quarter-turn actuator Type GDA = double-actingType GSR = single-acting (with spring return)

Design features Rack-and-pinion principle with self-centering piston guide in the housing; single-acting: with safety springs

Installation position Any desired

Standards Connection point actuator signal device:acc. to VDI/VDE 3845 (NAMUR) Connection point actuator/control valve:acc. to NAMUR or VDI/VDE 3845Connection point actuator/valve: four or eight internal threads in the actuator housing:acc. to EN ISO 5211

Different mounting and connection dimensions are possible

Actuator pinion optionally with Double-D bore according to EN ISO 5211 or according to customer requirements

Materials Housing coating: powder-coated; PTFECap coating: PTFE

Pinion: stainless steel 303; AISI 316Seals: FKM

Ambient temperature -20°C to +80°C

Low temperature design: -40°C to +80°CHigh temperature design:-20°C to +160°C

Nominal pivoting angleDouble- and single-acting: 90°Nominal pivoting angle can be adjusted as stan-dard from + 5° to -5° in both end positions

Another pivoting angles upon request.

Torque 2 to 13.040 Nm

Control pressure 2 to 8 bar

Control medium/qualityFiltered air with regard to residual oil content, dust and water minimum according toDIN ISO 8573-1: 2010 [7:-:4]

Upon request also can be operated with other non- aggressive, gaseous or liquid media

Housing: Aluminium-alloy, hard anodisedCap: Aluminium-alloy, powder-coatedPiston/rack: Aluminium-alloyPinion: corrosion-protected steelSeals: NBRBearings: made of plastic with very good sliding propertiesScrews: stainless steel A2

Type GDA-032 Type GDA/GSR-300 – 400Type GDA/GSR-040 – 270

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 4: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

4

Function double-acting GDA-032 to 210

Function double-acting GDA-240 to 400

+

-

-

If the two outer chambers are pressurised via connection „4“, the pistons move towards each other into the basic position (0°). The force of both pistons is transmitted to the pinion „C“ via the racks. If connection „2“ is pressurised and connection „4“ is vented, the pistons move apart into the 90° position.

The pivoting angle can be adjusted between + 5° and - 5° in a pressureless state in both positions with the end position adjustment screws „D“ and secured with the lock nut „E“.

2 4

DC

D EE

2 4

CD EDE

2 4

2 4

DC

D EE

DC

D EE

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

2 4

DC

D EE

2 4

CD EDE

2 4

2 4

DC

D EE

DC

D EE DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

+

Page 5: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

5

Function single-acting GSR-052 to 210

Function single-acting GSR-240 to 400

In the single-acting model the springs push the pistons back into the basic position and air is exhausted from connection „2“.

The number of springs can be adapted to the available control pressure.

The setting of the end positions is carried out as described under „Function double-acting“.

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

DC

D EE 2 4

2 4

DC

D EE

2 4

CD EDE

2 4

2 4

DC

D EE

DC

D EE

2 4

DC

D EE

2 4

CD EDE

2 4

2 4

DC

D EE

DC

D EE

+

-

-+

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 6: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

6

Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar]

Md F [Nm] 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0Type Spring

code Md min Md max min max min max min max min max min max min max min max min max min max min max min max

GSR-052

1 0.8 1.2 6.8 7.2 8.8 9.2 10.8 11.2 12.8 13.2 14.8 15.2 16.8 17.2 18.8 19.2 20.8 21.2 22.8 23.2 26.8 27.1 30.8 31.1

2 1.6 2.4 5.6 6.4 7.6 8.4 9.6 10.4 11.6 12.3 13.6 14.3 15.6 16.3 17.6 18.3 19.6 20.3 21.6 22.3 25.6 26.3 29.6 30.3

3 2.5 3.6 4.4 5.5 6.4 7.5 8.4 9.5 10.4 11.5 12.4 13.5 14.4 15.5 16.4 17.5 18.4 19.5 20.4 21.5 24.4 25.5 28.4 29.5

4 3.3 4.7 3.2 4.7 5.2 6.7 7.2 8.7 9.2 10.7 11.2 12.7 13.2 14.7 15.2 16.7 17.2 18.7 19.2 20.7 23.2 24.7 27.2 28.7

5 4.1 5.9 2.1 3.9 4.1 5.9 6.1 7.9 8.0 9.9 10.0 11.9 12.0 13.9 14.0 15.9 16.0 17.9 18.0 19.9 22.0 23.9 26.0 27.9

6 4.9 7.1 0.9 3.1 2.9 5.1 4.9 7.1 6.9 9.1 8.9 11.1 10.9 13.1 12.9 15.1 14.9 17.1 16.8 19.1 20.8 23.1 24.8 27.1

7 5.7 8.3 1.7 4.3 3.7 6.3 5.7 8.3 7.7 10.3 9.7 12.3 11.7 14.3 13.7 16.3 15.7 18.3 19.7 22.2 23.7 26.2

8 6.5 9.5 2.5 5.4 4.5 7.4 6.5 9.4 8.5 11.4 10.5 13.4 12.5 15.4 14.5 17.4 18.5 21.4 22.5 25.4

9 7.4 10.7 1.3 4.6 3.3 6.6 5.3 8.6 7.3 10.6 9.3 12.6 11.3 14.6 13.3 16.6 17.3 20.6 21.3 24.6

10 8.2 11.9 2.1 5.8 4.1 7.8 6.1 9.8 8.1 11.8 10.1 13.8 12.1 15.8 16.1 19.8 20.1 23.8

11 9.0 13.1 2.9 7.0 4.9 9.0 6.9 11.0 8.9 13.0 10.9 15.0 14.9 19.0 18.9 23.0

12 9.8 14.2 1.7 6.2 3.7 8.2 5.7 10.2 7.7 12.2 9.7 14.2 13.7 18.2 17.7 22.2

GSR-063

1 1.4 2.1 12.0 12.6 15.5 16.1 19.0 19.7 22.5 23.2 26.0 26.7 29.5 30.2 33.1 33.7 36.6 37.2 40.1 40.7 47.1 47.8 54.2 54.8

2 2.9 4.2 9.9 11.2 13.4 14.7 16.9 18.2 20.4 21.7 23.9 25.2 27.5 28.8 31.0 32.3 34.5 35.8 38.0 39.3 45.0 46.3 52.1 53.4

3 4.3 6.3 7.8 9.7 11.3 13.3 14.8 16.8 18.3 20.3 21.9 23.8 25.4 27.3 28.9 30.8 32.4 34.3 35.9 37.9 42.9 44.9 50.0 51.9

4 5.8 8.4 5.7 8.3 9.2 11.8 12.7 15.3 16.2 18.8 19.8 22.4 23.3 25.9 26.8 29.4 30.3 32.9 33.8 36.4 40.9 43.5 47.9 50.5

5 7.2 10.5 3.6 6.9 7.1 10.4 10.6 13.9 14.2 17.4 17.7 20.9 21.2 24.4 24.7 28.0 28.2 31.5 31.7 35.0 38.8 42.0 45.8 49.0

6 8.6 12.5 1.5 5.4 5.0 8.9 8.6 12.5 12.1 16.0 15.6 19.5 19.1 23.0 22.6 26.5 26.1 30.0 29.6 33.5 36.7 40.6 43.7 47.6

7 10.1 14.6 2.9 7.5 6.5 11.0 10.0 14.5 13.5 18.0 17.0 21.6 20.5 25.1 24.0 28.6 27.6 32.1 34.6 39.1 41.6 46.2

8 11.5 16.7 4.4 9.6 7.9 13.1 11.4 16.6 14.9 20.1 18.4 23.6 21.9 27.1 25.5 30.7 32.5 37.7 39.5 44.7

9 13.0 18.8 2.3 8.1 5.8 11.6 9.3 15.2 12.8 18.7 16.3 22.2 19.9 25.7 23.4 29.2 30.4 36.3 37.4 43.3

10 14.4 20.9 3.7 10.2 7.2 13.7 10.7 17.2 14.3 20.8 17.8 24.3 21.3 27.8 28.3 34.8 35.3 41.8

11 15.8 23.0 5.1 12.3 8.6 15.8 12.2 19.3 15.7 22.8 19.2 26.3 26.2 33.4 33.3 40.4

12 17.3 25.1 3.0 10.8 6.6 14.4 10.1 17.9 13.6 21.4 17.1 24.9 24.1 31.9 31.2 39.0

Torques – single-acting actuators, type GSR [Nm]When determining the actuator sizes, a safety factor for the valve must always be taken into account. The recommended safety factor is minimum 30%. Since this safety factor is subject to the operating conditions, the required safety factor may possibly be much higher.

The color-marked torques have a balanced ratio between air and spring torque.

When determining the actuator sizes, a safety factor for the valve must always be taken into account. The recommended safety factor is minimum 30%. Since this safety factor is subject to the operating conditions, the required safety factor may possibly be much higher.

Torques double-acting actuators, type GDA [Nm]

Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar]Type 2 2.5 3 3.5 4 4.5 5 5.5 6 7 8

GDA-032 3 4 5 5 6 7 8 8 9 11 12GDA-040 5 6 7 8 10 11 12 13 14 17 19GDA-052 8 10 12 14 16 18 20 22 24 28 32GDA-063 14 18 21 25 28 32 35 39 42 49 56GDA-075 20 25 30 35 40 45 50 55 60 70 79GDA-083 31 38 46 53 61 69 76 84 92 107 122GDA-092 45 56 67 79 90 101 112 124 135 157 180GDA-105 65 81 98 114 130 146 163 179 195 228 260GDA-125 101 127 152 178 203 228 254 279 304 355 406GDA-140 174 217 260 304 347 390 434 477 521 607 694GDA-160 264 331 397 463 529 595 661 727 793 925 1058GDA-190 426 533 639 746 852 959 1066 1172 1279 1492 1705GDA-210 521 651 781 911 1041 1171 1302 1432 1562 1822 2082GDA-240 765 956 1148 1339 1530 1721 1913 2104 2295 2678 3060GDA-270 1162 1453 1743 2034 2324 2615 2905 3196 3486 4067 4648GDA-300 1594 1993 2391 2790 3188 3587 3985 4384 4782 5579 6376GDA-350 2387 2983 3580 4177 4773 5370 5967 6563 7160 8353 9546GDA-400 3256 4070 4884 5698 6512 7326 8140 8954 9768 11396 13024

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 7: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

7

Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar]

Md F [Nm] 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0Type Spring

code Md min Md max min max min max min max min max min max min max min max min max min max min max min max

GSR-075

1 2 3 17 18 22 23 27 28 32 33 37 38 42 43 47 48 52 53 57 58 67 68 77 78

2 4 6 14 16 19 21 24 26 29 31 34 36 39 41 44 46 49 51 54 56 64 66 74 76

3 6 9 11 14 16 19 21 24 26 29 31 34 36 39 41 44 46 49 51 54 61 64 71 73

4 8 12 8 12 13 17 18 22 23 27 28 32 33 37 38 42 43 47 48 52 58 61 68 71

5 10 15 5 10 10 15 15 20 20 25 25 30 30 35 35 40 40 45 45 49 55 59 65 69

6 12 18 2 8 7 13 12 18 17 23 22 28 27 33 32 37 37 42 42 47 52 57 62 67

7 14 21 4 11 9 16 14 21 19 25 24 30 29 35 34 40 39 45 49 55 59 65

8 16 24 6 14 11 18 16 23 21 28 26 33 31 38 36 43 46 53 56 63

9 18 27 3 11 8 16 13 21 18 26 23 31 28 36 33 41 43 51 53 61

10 20 30 5 14 10 19 15 24 20 29 25 34 30 39 40 49 50 59

11 22 33 7 17 12 22 17 27 22 32 27 37 37 47 47 57

12 25 36 4 15 9 20 14 25 19 30 24 35 34 45 44 55

GSR-083

1 3 5 26 27 34 35 41 43 49 50 56 58 64 65 72 73 79 81 87 88 102 104 117 119

2 6 9 21 24 29 32 37 39 44 47 52 55 60 62 67 70 75 78 82 85 98 100 113 116

3 9 14 17 21 25 29 32 36 40 44 47 52 55 59 63 67 70 74 78 82 93 97 108 113

4 13 18 12 18 20 26 28 33 35 41 43 48 50 56 58 64 66 71 73 79 89 94 104 109

5 16 23 8 15 15 22 23 30 31 38 38 45 46 53 54 61 61 68 69 76 84 91 99 106

6 19 27 3 12 11 19 19 27 26 35 34 42 41 50 49 57 57 65 64 73 80 88 95 103

7 22 32 6 16 14 24 22 31 29 39 37 47 45 54 52 62 60 70 75 85 90 100

8 25 36 9 21 17 28 25 36 32 44 40 51 48 59 55 66 70 82 86 97

9 28 41 5 18 13 25 20 33 28 40 35 48 43 56 51 63 66 79 81 94

10 31 45 8 22 16 30 23 37 31 45 39 53 46 60 61 75 77 91

11 34 50 11 27 19 34 26 42 34 49 42 57 57 72 72 88

12 38 54 7 23 14 31 22 39 29 46 37 54 52 69 68 84

GSR-092

1 5 7 38 40 49 52 61 63 72 74 83 85 94 97 106 108 117 119 128 130 151 153 173 175

2 9 13 32 36 43 47 54 58 65 69 77 81 88 92 99 103 110 114 121 126 144 148 166 171

3 14 20 25 31 36 42 47 54 59 65 70 76 81 87 92 99 104 110 115 121 137 143 160 166

4 18 27 18 27 29 38 41 49 52 60 63 71 74 83 86 94 97 105 108 116 131 139 153 161

5 23 33 11 22 23 33 34 44 45 56 56 67 68 78 79 89 90 101 101 112 124 134 146 157

6 28 40 5 17 16 29 27 40 39 51 50 62 61 73 72 85 83 96 95 107 117 130 140 152

7 32 47 9 24 21 35 32 46 43 58 54 69 66 80 77 91 88 103 110 125 133 147

8 37 54 3 19 14 31 25 42 36 53 48 64 59 75 70 87 81 98 104 120 126 143

9 41 60 7 26 18 37 30 48 41 60 52 71 63 82 75 93 97 116 120 138

10 46 67 12 33 23 44 34 55 45 66 57 77 68 89 90 111 113 134

11 51 74 16 39 28 50 39 62 50 73 61 84 84 107 106 129

12 55 80 10 35 21 46 32 57 43 68 55 80 77 102 99 124

GSR-105

1 7 10 55 58 72 75 88 91 104 107 120 123 137 140 153 156 169 172 185 188 218 221 250 253

2 13 19 46 52 62 68 78 84 94 100 111 117 127 133 143 149 159 165 176 182 208 214 241 247

3 20 29 36 45 52 61 68 77 85 94 101 110 117 126 133 142 150 159 166 175 198 207 231 240

4 27 39 26 38 43 55 59 71 75 87 91 103 108 120 124 136 140 152 156 168 189 201 221 233

5 33 48 17 32 33 48 49 64 65 80 82 97 98 113 114 129 130 145 147 162 179 194 212 227

6 40 58 7 25 23 41 39 57 56 74 72 90 88 106 104 122 121 139 137 155 169 187 202 220

7 47 68 13 34 30 51 46 67 62 83 78 99 95 116 111 132 127 148 160 181 192 213

8 53 77 20 44 36 60 53 77 69 93 85 109 101 125 118 142 150 174 183 207

9 60 87 27 54 43 70 59 86 75 102 92 119 108 135 140 167 173 200

10 67 97 17 47 33 63 49 79 66 96 82 112 98 128 131 161 163 193

11 73 106 24 57 40 73 56 89 72 105 89 122 121 154 154 187

12 80 116 14 50 30 66 46 82 63 99 79 115 111 147 144 180

GSR-125

1 10 15 86 91 112 116 137 142 162 167 188 192 213 218 239 243 264 269 289 294 340 345 391 395

2 21 30 71 81 97 106 122 131 147 157 173 182 198 207 223 233 249 258 274 284 325 334 376 385

3 31 45 56 70 82 96 107 121 132 146 158 172 183 197 208 222 234 248 259 273 310 324 360 375

4 42 60 41 60 66 85 92 111 117 136 143 161 168 187 193 212 219 237 244 263 295 313 345 364

5 52 75 26 49 51 75 77 100 102 126 127 151 153 176 178 202 204 227 229 252 280 303 330 354

6 62 91 11 39 36 64 62 90 87 115 112 140 138 166 163 191 188 217 214 242 265 293 315 343

7 73 106 21 54 47 79 72 105 97 130 123 155 148 181 173 206 199 232 249 282 300 333

8 83 121 31 69 57 94 82 120 108 145 133 170 158 196 184 221 234 272 285 323

9 94 136 42 84 67 109 92 135 118 160 143 185 169 211 219 261 270 312

10 104 151 27 74 52 99 77 124 103 150 128 175 153 200 204 251 255 302

11 114 166 37 88 62 114 88 139 113 165 138 190 189 241 240 291

12 125 181 22 78 47 103 73 129 98 154 123 180 174 230 225 281

Torques – single-acting actuators, type GSR [Nm]

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 8: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

8

Torques – single-acting actuators, type GSR [Nm]

Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar]

Md F [Nm] 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0Type Spring

code Md min Md max min max min max min max min max min max min max min max min max min max min max min max

GSR-140

1 18 26 148 156 191 199 234 242 278 286 321 329 365 373 408 416 451 459 495 503 581 589 668 676

2 36 52 122 138 165 181 209 225 252 268 295 311 339 355 382 398 425 442 469 485 556 572 642 658

3 53 77 96 120 139 164 183 207 226 250 270 294 313 337 356 380 400 424 443 467 530 554 617 641

4 71 103 70 102 114 146 157 189 200 233 244 276 287 319 330 363 374 406 417 449 504 536 591 623

5 89 129 44 85 88 128 131 171 175 215 218 258 261 302 305 345 348 388 391 432 478 518 565 605

6 107 155 19 67 62 110 105 154 149 197 192 240 235 284 279 327 322 371 366 414 452 501 539 587

7 124 181 36 93 80 136 123 179 166 223 210 266 253 309 296 353 340 396 427 483 513 570

8 142 207 54 118 97 162 140 205 184 248 227 292 271 335 314 378 401 465 487 552

9 160 232 71 144 115 187 158 231 201 274 245 317 288 361 375 447 462 534

10 178 258 45 126 89 169 132 213 176 256 219 300 262 343 349 430 436 516

11 195 284 63 152 106 195 150 238 193 282 236 325 323 412 410 499

12 213 310 37 134 81 177 124 221 167 264 211 307 297 394 384 481

GSR-160

1 27 39 225 237 291 303 357 369 423 436 489 502 556 568 622 634 688 700 754 766 886 898 1018 1030

2 54 79 186 210 252 276 318 342 384 408 450 475 516 541 582 607 648 673 715 739 847 871 979 1003

3 81 118 146 183 212 249 279 315 345 381 411 447 477 514 543 580 609 646 675 712 807 844 940 976

4 108 157 107 156 173 222 239 288 305 354 371 420 438 486 504 553 570 619 636 685 768 817 900 949

5 136 197 68 129 134 195 200 261 266 327 332 393 398 459 464 525 530 592 597 658 729 790 861 922

6 163 236 28 102 94 168 161 234 227 300 293 366 359 432 425 498 491 564 557 631 689 763 822 895

7 190 275 55 141 121 207 187 273 253 339 320 405 386 471 452 537 518 603 650 736 782 868

8 217 315 82 180 148 246 214 312 280 378 346 444 412 510 478 576 611 709 743 841

9 244 354 109 219 175 285 241 351 307 417 373 483 439 549 571 681 704 814

10 271 393 69 192 135 258 202 324 268 390 334 456 400 522 532 654 664 787

11 298 433 96 231 162 297 228 363 294 429 360 495 493 627 625 759

12 325 472 57 203 123 270 189 336 255 402 321 468 453 600 586 732

GSR-190

1 44 63 363 383 469 489 576 596 683 702 789 809 896 915 1002 1022 1109 1129 1215 1235 1429 1448 1642 1661

2 87 127 299 339 406 445 513 552 619 659 726 765 832 872 939 978 1045 1085 1152 1191 1365 1405 1578 1618

3 131 190 236 295 343 402 449 508 556 615 662 721 769 828 876 935 982 1041 1089 1148 1302 1361 1515 1574

4 175 254 173 252 279 358 386 465 492 571 599 678 706 784 812 891 919 998 1025 1104 1238 1317 1452 1530

5 218 317 109 208 216 314 322 421 429 528 536 634 642 741 749 847 855 954 962 1060 1175 1274 1388 1487

6 262 380 46 164 152 271 259 377 366 484 472 590 579 697 685 804 792 910 898 1017 1112 1230 1325 1443

7 306 444 89 227 196 334 302 440 409 547 515 653 622 760 728 866 835 973 1048 1186 1261 1399

8 350 507 132 290 239 396 345 503 452 610 559 716 665 823 772 929 985 1142 1198 1356

9 393 571 175 353 282 459 389 566 495 672 602 779 708 886 921 1099 1135 1312

10 437 634 112 309 219 416 325 522 432 629 538 735 645 842 858 1055 1071 1268

11 481 697 155 372 262 479 368 585 475 692 581 798 795 1011 1008 1225

12 524 761 92 328 198 435 305 541 411 648 518 755 731 968 944 1181

GSR-210

1 53 77 443 467 573 597 703 728 834 858 964 988 1094 1118 1224 1248 1354 1378 1484 1508 1745 1769 2005 2029

2 107 155 366 414 496 544 626 674 756 804 886 934 1016 1065 1147 1195 1277 1325 1407 1455 1667 1715 1928 1976

3 160 232 288 361 418 491 549 621 679 751 809 881 939 1011 1069 1141 1199 1272 1329 1402 1590 1662 1850 1922

4 213 310 211 307 341 437 471 567 601 698 731 828 862 958 992 1088 1122 1218 1252 1348 1512 1609 1773 1869

5 267 387 133 254 264 384 394 514 524 644 654 774 784 905 914 1035 1044 1165 1175 1295 1435 1555 1695 1816

6 320 465 56 200 186 331 316 461 446 591 577 721 707 851 837 981 967 1111 1097 1242 1357 1502 1618 1762

7 374 542 109 277 239 407 369 537 499 668 629 798 759 928 890 1058 1020 1188 1280 1449 1540 1709

8 427 620 161 354 291 484 422 614 552 744 682 875 812 1005 942 1135 1203 1395 1463 1655

9 480 697 214 431 344 561 474 691 604 821 735 951 865 1082 1125 1342 1385 1602

10 534 775 137 377 267 508 397 638 527 768 657 898 787 1028 1048 1288 1308 1549

11 587 852 189 454 319 584 450 714 580 845 710 975 970 1235 1230 1495

12 640 929 112 401 242 531 372 661 502 791 632 921 893 1182 1153 1442

GSR-240

1 78 114 651 687 843 878 1034 1069 1225 1260 1416 1452 1608 1643 1799 1834 1990 2026 2181 2217 2564 2599 2947 2982

2 157 228 537 608 729 800 920 991 1111 1182 1303 1373 1494 1565 1685 1756 1876 1947 2068 2138 2450 2521 2833 2903

3 235 341 424 530 615 721 806 912 997 1104 1189 1295 1380 1486 1571 1677 1763 1869 1954 2060 2336 2443 2719 2825

4 314 455 310 451 501 643 692 834 884 1025 1075 1217 1266 1408 1458 1599 1649 1790 1840 1982 2223 2364 2605 2747

5 392 569 196 373 387 564 579 756 770 947 961 1138 1152 1329 1344 1521 1535 1712 1726 1903 2109 2286 2491 2668

6 470 683 82 295 274 486 465 677 656 868 847 1060 1039 1251 1230 1442 1421 1633 1612 1825 1995 2207 2378 2590

7 549 797 160 407 351 599 542 790 734 981 925 1173 1116 1364 1307 1555 1499 1746 1881 2129 2264 2511

8 627 910 237 520 428 712 620 903 811 1094 1002 1285 1194 1477 1385 1668 1767 2050 2150 2433

9 706 1024 315 633 506 824 697 1016 889 1207 1080 1398 1271 1590 1654 1972 2036 2355

10 784 1138 201 555 392 746 583 937 775 1129 966 1320 1157 1511 1540 1894 1922 227611 863 1252 278 668 470 859 661 1050 852 1241 1043 1433 1426 1815 1809 219812 941 1366 165 589 356 780 547 972 738 1163 930 1354 1312 1737 1695 2119

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 9: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

9

Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar]

Md F [Nm] 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0Type Spring

codeMd min

Md max

min max min max min max min max min max min max min max min max min max min max min max

GSR-270

1 119 173 989 1043 1280 1333 1570 1624 1860 1914 2151 2205 2441 2495 2732 2786 3022 3076 3313 3367 3894 3948 4475 4529

2 238 346 816 924 1107 1214 1397 1505 1688 1795 1978 2086 2269 2376 2559 2667 2850 2957 3140 3248 3721 3828 4302 4409

3 357 518 643 805 934 1095 1224 1386 1515 1676 1805 1967 2096 2257 2386 2547 2677 2838 2967 3128 3548 3709 4129 4290

4 476 691 471 686 761 976 1052 1266 1342 1557 1632 1847 1923 2138 2213 2428 2504 2719 2794 3009 3375 3590 3956 4171

5 596 864 298 566 588 857 879 1147 1169 1438 1460 1728 1750 2019 2041 2309 2331 2600 2622 2890 3203 3471 3783 4052

6 715 1037 125 447 415 738 706 1028 996 1319 1287 1609 1577 1900 1868 2190 2158 2481 2449 2771 3030 3352 3611 3933

7 834 1210 243 619 533 909 824 1200 1114 1490 1404 1781 1695 2071 1985 2362 2276 2652 2857 3233 3438 3814

8 953 1383 360 790 651 1081 941 1371 1232 1661 1522 1952 1813 2242 2103 2533 2684 3114 3265 3695

9 1072 1555 478 961 768 1252 1059 1542 1349 1833 1640 2123 1930 2414 2511 2995 3092 3576

10 1191 1728 305 842 596 1133 886 1423 1176 1714 1467 2004 1757 2295 2338 2876 2919 3457

11 1310 1901 423 1014 713 1304 1004 1595 1294 1885 1585 2176 2166 2757 2746 3338

12 1429 2074 250 895 540 1185 831 1476 1121 1766 1412 2057 1993 2637 2574 3218

GSR-300

1 163 237 1357 1431 1755 1829 2154 2227 2552 2626 2951 3024 3349 3423 3748 3821 4146 4220 4545 4618 5342 5415 6139 6212

2 327 474 1120 1267 1518 1666 1917 2064 2315 2463 2714 2861 3112 3260 3511 3658 3909 4056 4308 4455 5104 5252 5901 6049

3 490 711 883 1104 1281 1502 1680 1901 2078 2299 2477 2698 2875 3096 3273 3495 3672 3893 4070 4292 4867 5089 5664 5885

4 653 948 646 940 1044 1339 1443 1737 1841 2136 2239 2534 2638 2933 3036 3331 3435 3730 3833 4128 4630 4925 5427 5722

5 817 1185 408 777 807 1176 1205 1574 1604 1972 2002 2371 2401 2769 2799 3168 3198 3566 3596 3965 4393 4762 5190 5559

6 980 1423 171 614 570 1012 968 1411 1367 1809 1765 2208 2164 2606 2562 3005 2961 3403 3359 3801 4156 4598 4953 5395

7 1144 1660 333 849 731 1247 1130 1646 1528 2044 1927 2443 2325 2841 2724 3240 3122 3638 3919 4435 4716 5232

8 1307 1897 494 1084 893 1482 1291 1881 1690 2279 2088 2678 2487 3076 2885 3475 3682 4272 4479 5069

9 1470 2134 656 1319 1054 1717 1452 2116 1851 2514 2249 2913 2648 3311 3445 4108 4242 4905

10 1634 2371 418 1156 817 1554 1215 1953 1614 2351 2012 2750 2411 3148 3208 3945 4005 4742

11 1797 2608 580 1391 978 1789 1377 2188 1775 2586 2174 2985 2971 3782 3768 4579

12 1960 2845 343 1227 741 1626 1140 2024 1538 2423 1937 2821 2734 3618 3531 4415

GSR-350

1 245 355 2031 2142 2628 2738 3225 3335 3821 3932 4418 4528 5014 5125 5611 5721 6208 6318 6804 6915 7997 8108 9191 9301

2 489 710 1676 1897 2273 2494 2870 3090 3466 3687 4063 4284 4659 4880 5256 5477 5853 6073 6449 6670 7642 7863 8836 9056

3 734 1065 1321 1653 1918 2249 2515 2846 3111 3442 3708 4039 4304 4636 4901 5232 5498 5829 6094 6425 7287 7619 8481 8812

4 978 1420 967 1408 1563 2005 2160 2601 2756 3198 3353 3794 3950 4391 4546 4988 5143 5584 5739 6181 6933 7374 8126 8567

5 1223 1775 612 1163 1208 1760 1805 2357 2401 2953 2998 3550 3595 4146 4191 4743 4788 5340 5384 5936 6578 7129 7771 8323

6 1468 2130 257 919 853 1515 1450 2112 2046 2709 2643 3305 3240 3902 3836 4498 4433 5095 5029 5692 6223 6885 7416 8078

7 1712 2485 498 1271 1095 1867 1691 2464 2288 3061 2885 3657 3481 4254 4078 4850 4674 5447 5868 6640 7061 7833

8 1957 2840 740 1623 1336 2219 1933 2816 2530 3413 3126 4009 3723 4606 4319 5202 5513 6396 6706 7589

9 2201 3195 981 1975 1578 2571 2175 3168 2771 3765 3368 4361 3964 4958 5158 6151 6351 7344

10 2446 3550 627 1730 1223 2327 1820 2923 2416 3520 3013 4117 3610 4713 4803 5906 5996 7100

11 2691 3905 868 2082 1465 2679 2061 3275 2658 3872 3255 4469 4448 5662 5641 6855

12 2935 4260 513 1838 1110 2434 1706 3031 2303 3627 2900 4224 4093 5417 5286 6610

GSR-400

1 262 411 2845 2994 3659 3808 4473 4622 5287 5436 6101 6250 6915 7064 7729 7878 8543 8692 9357 9506 10985 11134 12613 12762

2 525 823 2433 2731 3247 3545 4061 4359 4875 5173 5689 5987 6503 6801 7317 7615 8131 8429 8945 9243 10573 10871 12201 12499

3 787 1234 2022 2469 2836 3283 3650 4097 4464 4911 5278 5725 6092 6539 6906 7353 7720 8167 8534 8981 10162 10609 11790 12237

4 1050 1646 1610 2206 2424 3020 3238 3834 4052 4648 4866 5462 5680 6276 6494 7090 7308 7904 8122 8718 9750 10346 11378 11974

5 1312 2057 1199 1944 2013 2758 2827 3572 3641 4386 4455 5200 5269 6014 6083 6828 6897 7642 7711 8456 9339 10084 10967 11712

6 1575 2469 787 1681 1601 2495 2415 3309 3229 4123 4043 4937 4857 5751 5671 6565 6485 7379 7299 8193 8927 9821 10555 11449

7 1837 2880 376 1419 1190 2233 2004 3047 2818 3861 3632 4675 4446 5489 5260 6303 6074 7117 6888 7931 8516 9559 10144 11187

8 2100 3292 778 1970 1592 2784 2406 3598 3220 4412 4034 5226 4848 6040 5662 6854 6476 7668 8104 9296 9732 10924

9 2362 3703 1181 2522 1995 3336 2809 4150 3623 4964 4437 5778 5251 6592 6065 7406 7693 9034 9321 10662

10 2625 4115 769 2260 1583 3074 2397 3888 3211 4702 4025 5516 4839 6330 5653 7144 7281 8772 8909 10400

11 2887 4526 1172 2811 1986 3625 2800 4439 3614 5253 4428 6067 5242 6881 6870 8509 8498 10137

12 3149 4938 760 2549 1574 3363 2388 4177 3202 4991 4016 5805 4830 6619 6458 8247 8086 9875

13 3412 5349 1163 3100 1977 3914 2791 4728 3605 5542 4419 6356 6047 7984 7675 9612

14 3674 5761 751 2838 1565 3652 2379 4466 3193 5280 4007 6094 5635 7722 7263 9350

15 3937 6172 1154 3389 1968 4203 2782 5017 3596 5831 5224 7459 6852 9087

16 4199 6584 742 3127 1556 3941 2370 4755 3184 5569 4812 7197 6440 8825

Torques – single-acting actuators, type GSR [Nm]

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 10: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

10

Dimensional drawings for type GDA-032

4

4

32

24

J

S

P

12

30

A

R

M6x12

G 1/8"

M5x8

C

B

24,5

37

41

SW x depth

SW x

depth

ISO H

F x depth

K

M

M5x8

4

4

32

24

J

S

P

12

30

A

R

M6x12

G 1/8"

M5x8

C

B

24,5

37

41

SW x depth

SW x

depth

ISO H

F x depth

K

M

M5x8

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 11: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

11

Dimensional drawings for type GDA/GSR-040 to 210

4

4

32

J

24 A

12

P R 3

0

S

M6x12

G 1/4"

M5x8

37

C

N

B

41 (040-083)58,4 (092-210)

D

ca. O

SW x depth

SW

x depth

ISO H

ISO I

F x depth

G x depth M

K

M5x8

4

4

32

J

24 A

12

P R 3

0

S

M6x12

G 1/4"

M5x8 3

7 C

N

B

41 (040-083)58,4 (092-210)

D

ca. O

SW x depth

SW x

depth

ISO H

ISO I

F x depth

G x depth

M

K

M5x8

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 12: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

12

Dimensional drawings for type GDA/GSR-240 and 270

24 (240)40 (270)

32 (

240)

45 (

270)

J

A

4

S

4

12

30

R

M6x12

ø P

G 1/4" (240)G 1/2" (270)

M5x8 (240)M6x10 (270)

D ca. O

C

80

38

B

SW x depth

SW x

depth

ISO H

F x depth

K

M

M5x8

24 (240)40 (270)

32 (

240)

45 (

270)

J

A

4

S

4

12

30

R

M6x12

ø P

G 1/4" (240)G 1/2" (270)

M5x8 (240)M6x10 (270)

D ca. O

C

80

38

B

SW x depth

SW x

depth

ISO H

F x depth

K

M

M5x8

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 13: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

13

Dimensional drawings for type GDA/GSR-300, 350 and 400

4 4

S

12

30

R

45

40 J

A

G 1/2"

M6x12

øP

M6x10

D

C

B

38 80

SW x depth

SW x

depth

ISO H

ISO I

F x depth

G x depth

K

M

M5x8 4 4

S

12

30

R

45

40 J

A

G 1/2"

M6x12

øP

M6x10

D

C

B

38 80

SW x depth

SW x

depth

ISO H

ISO I

F x depth

G x depth

K

M

M5x8

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 14: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

14

Measurement chart

Double-acting actuators

Single-acting actuators

TypeGDAGSR

A B C D E F x depth

G x depth ISO H ISO I J K M N O P R S SW x

depth

032 114 55 49 1/8" M5x8 ø36/F03 24.5 80 30 ø12 ø21,5 10 9x11040 120 60.5 60 1/4" M5x8 M6x9 ø36/F03 ø50/F05 24 80 30 15 ø12 ø21.5 10 11x14052 147 60 72 74.5 1/4" M5x8 M6x9 ø36/F03 ø50/F05 48 80 30 46 9 ø12 ø21.5 10 11x14063 165 72 88 83 1/4" M6x10 M8x13 ø50/F05 ø70/F07 61 80 30 46 12 ø12 ø26.5 10 14x18075 182 84 99.5 95 1/4" M6x10 M8x13 ø50/F05 ø70/F07 73.3 80 30 46 11 ø12 ø26.5 10 17x21083 208 92 109 103 1/4" M6x10 M8x13 ø50/F05 ø70/F07 80 80 30 46 12 ø12 ø26.5 10 17x21092 262 102 116.5 109.5 1/4" M6x10 M8x13 ø50/F05 ø70/F07 91 80 30 46 9 ø18 ø35 14 17x21105 270 115 133 124.5 1/4" M8x13 M10x16 ø70/F07 ø102/F10 99.5 80 30 46 7.5 ø18 ø35 14 22x26125 301 135 155 142 1/4" M8x13 M10x16 ø70/F07 ø102/F10 127 80 30 46 8.5 ø28 ø46 20 22x26140 395 152 172 1/4" M10x16 M12x19 ø102/F10 ø125/F12 138 80 30 75 7 ø28 ø51 20 27x31160 454 174 197 1/4" M10x16 M12x19 ø102/F10 ø125/F12 159.5 80 30 84 6 ø28 ø51 20 27x31190 528 206 230 1/4" M16x24 ø140/F14 188 130 30 100 8.5 ø44 ø61 32 36x40210 536 226 255 1/4" M16x24 ø140/F14 205.5 130 30 115 10.5 ø44 ø73 32 36x40240 608 160 289 260 1/4" M20x25 ø165/F16 67.5 130 30 10.5 ø44 ø73 32 46x50270 721 160 328 294 1/2" M20x25 ø165/F16 79 130 30 13.5 ø44 ø73 32 46x50300 769 210 348 406 1/2" M20x25 ø165/F16 174 130 30 ø44 ø73 32 46x60350 909 280 408 460 1/2" M20x25 M16x25 ø165/F16 ø254/F25 204 130 30 ø44 ø73 32 55x60400 925 300 480 516 1/2" M20x25 M16x25 ø165/F16 ø254/F25 240 130 30 ø44 ø73 32 55x60

TypeGDA

Weight[kg]

Volume/double stroke[L]

032 0.73 0.09040 0.9 0.19052 1.3 0.28063 2.0 0.44075 2.55 0.64083 3.25 0.9092 5.24 1.37105 6.06 1.83125 10.00 3.0140 14.02 4.7160 24.52 6.9190 32.4 11.3210 39.8 15.0240 57.0 20.0270 78.7 31.0300 121.7 53.5350 210.2 81.4400 280 108.6

TypeGSR

Weight*[kg]

Volume/double stroke [L]

032 / /040 / /052 1.43 0.12063 2.17 0.21075 2.81 0.30083 3.67 0.43092 6.01 0.64105 6.9 0.95125 11.38 1.6140 16.42 2.5160 28.32 3.7190 39.4 5.9210 49.3 7.5240 70.0 11.0270 100.3 17.0300 149.12 23.8350 259.3 35.1400 325 52.6

* Weight with 12 springs

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 15: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

15

10 Housing 30 Pinion 42 Outside thrust washer

11 Stop screwNot applicable to size 032 31 Stop pin

Not applicable to size 032 50 Piston

12 Seal Stop screw

Not applicable to size 032 32 Pinion bearing upper

Not applicable to size 032 52 Guiding shoe

Not applicable to size 032

13 WasherNot applicable to size 032 33 Pinion bearing lower

Not applicable to size 032 53 Guide ring

Not applicable to 032 and 040, 2 x to size 350 and 400

14 Lock nutNot applicable to size 032 34 Inside thrust washer 54 Piston sealing

2 x for size 400

17 Position indicator 35 Seal pinion upper 60 Cap

23 Fixing screw for position indicator 37 Seal pinion lower 61 Cap seal

25* Ring nutSize 160 to 400 40 Support washer 62 Cap screws

26* Plastic washerSize 160 to 400 41 Lock washer 70 Springs

Not applicable to 032 and 040

Components GDA/GSR-032 to 400

5

10

index:drawing number:

date:creator:

THIS DRAWING IS OUR PROPERTY AND CAN'T BE REPRODUCED OR COMMUNICATED TO THIRD PARTIES WITHOUT OUR WRITTEN AUTHORIZATION.

namedate

[email protected]

53547 DattenbergGermany

23

17

41

40

421050

50

1152

13

14

5254

5361

70

6062

35

32

31

30

33

37

34

12

5453

7061

6062

Major dimensions are circled. The supplier is liable for all features mentioned on the drawing and the procurement specifications.

_

Schematic diagram

* Slings from GDA/GSR-160

CR-TEC Engineering [email protected] • 203-318-9500 • www.crtec.com

Page 16: GDA/GSR Pneumatic Actuators Technical Data Sheet · 2020. 1. 3. · 6 Spring force Pneumatic applied torque Md N [Nm] at minimum control pressure Pst [bar] Md F [Nm] 2.0 2.5 3.0 3.5

Mounting options

2/2-wayvalve

Drive pinion design Operating way

Flap Octagon Single-acting spring force “close”

Single-actingspring force “open”

2/2-wayvalve

Drive pinion design Operating way

Ball valve and tap cock

Octagon Single-acting spring force “close”

Single-actingspring force “open”

CR-TEC Engineering Inc.15 Orchard Park Road, Unit 18 • Madison, CT 06443

Tel. 203-318-9500 • Fax [email protected] • www.crtec.com

© 2019 CR-TEC Engineering, Inc.

The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding. CR-TEC Engineering, Inc. reserves the right to carry out any technical and design improvements to its products without prior notice.