GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

H I G H L Y P E R F O R M I N G S O L U T I O N S

MULTI-UNIT AbutmentsGE

Pho

to c

redi

t: A

ntho

gyr

- A

ll ri

ghts

res

erve

d. N

on c

ontr

actu

al p

hoto

s.C1

58_G

B -

201

5-04

ERGONOMIC RANGECOMPREHENSIVE RANGE

A RANGE OF 24 ABUTMENTS!

w 5 Gingival heights: 0.75, 1.5, 2.5, 3.5 and 4.5 mm.

w The 20° morse taper on the platform allowsgreater correction of axial malalignment.

HIGH-PERFORMANCE RANGEINTEGRITY OF AXIOM® ANGULATED MULTI-UNIT ABUTMENTS:Thanks to a unique design, integrity of these screw-retained abutments can be maintained with no trade-off to the wall thickness in critical zones:

The coronal part of the abutment is not truncated in the area that receives the MU M1.4 screw.

The connection system is not truncated at the base of the abutment which accommodates the M1.6 screw.

1

2

Gingival Height (mm) 0.75 1.5 2.5 3.5 4.5

Number of scribe lines

on coronal part0 1 2 3 4

Ø 4.8 mm Multi-Unit Abutments

18°

Angulation

w Angulated abutments (18° and 30°) in both indexed and non-indexed versions.

20° 20° 20°

30°18° or

COMMON PLATFORM

Ø = 4.8 mm

NARROW PLATFORM

Ø = 4.0 mmCOMMON OR NARROW PLATFORMSw Axiom® REG/PX angulated AND straight abutments have

a common Ø 4.8 mm platform and a 2.5 mmcoronal height (CH).Indicated for most multiple-unit screw-retained restorations. Reduced inventory of auxiliary components.

w Axiom® REG/PX straight abutments havea narrow Ø 4.0 mm platform and a reduced 1.5 mmcoronal height (CH).Indicated for multiple-unit screw-retained restorationsin patients with a small inter-implant distance.

EASY HANDLINGw Each abutment comes with its attached holder for easyEach abutment comes with its attached holder for easyEach abutment comes with its attached holder

transfer to the patient’s mouth and safer placement.w Can be used with the angulated drill guide.

QUICK IDENTIFICATIONw Each abutment is laser marked with angulation

(18° or 30°) and gingival height (CH).

EASY MANIPULATIONw Straight abutments have a tapered end which greatly

facilitates insertion.Angulated non indexed abutments feature a repositioning fl at.

w The taper angle on the coronal platform facilitatesplacement of auxiliary components.

ANGULATED DRILL GUIDEfor dental restorations using a limited number of implants

w 30° scribe lines on the drill guide;w 2 mm diameter support tip;w Drill guide height corresponds to tooth height: 10 mm;w Semi-fl exible stainless steel adapts for variances in

anatomy;w Pre-assembled holder assists in achieving parallel

alignment of Multi-Unit abutments.

Anthogyr SAS2 237, Avenue André Lasquin74700 Sallanches - FrancePhone: +33 (0)4 50 58 02 37 Fax: +33 (0)4 50 93 78 60 www.anthogyr.com

FOR ALL PLURAL RESTORATIONSw Partial or complete screw-retained bridges using Multi-Unit straight AND angulated abutments with

a COMMON platform.w Multiple-unit screw-retained restorations using Multi-Unit straight abutments with a NARROW

platform in patients with a small inter-implant distance.

Abutments are supplied Q for immediate loading.Q for immediate loading.Q

Ht 0.75 Ht 1.5 Ht 2.5 Ht 3.5 Ht 4.5

Multiple-UnitScrew-Retained Restorations

GE M U L T I P L E - U N I T S C R E W - R E T A I N E D R E S T O R A T I O N S

GE Ø 4.8 mm MULTI-UNIT RANGEØ 4.8 mm MULTI-UNIT ABUTMENTS

25N.cm

Component Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit protective cap (titanium)Supplied Q MUNCAP

Narrow Multi-Unit temporary coping (titanium)Supplied with one titanium MU M1.4 screw

MUNC100

Narrow Multi-Unit PEEK temporary coping Supplied with one titanium MU M1.4 screw

MUNC200

Narrow Multi-Unit defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC300

Narrow Multi-Unit CoCr** defi nitive castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUNC400

15N.cm

15N.cm

15N.cm

Manuel

w Used with Axiom® REG/PX implants for multiple-unit or full arch screw-retained restorations.

w Straight AND angulated abutments sharing the same auxiliary components.

w Supplied Q with a pre-assembled holder .

w Auxiliary components have a “yellow“ code.

GE Ø 4.0 mm MULTI-UNIT RANGEØ 4.0 mm NARROW MULTI-UNIT ABUTMENTSw Used with Axiom® REG and Axiom® PX implants for multiple-unit screw-retained restorations in patients with a small

inter-implant distance.w Straight narrow abutments use dedicated auxiliary components.w Supplied Q with a pre-assembled holder .w Auxiliary components have a “green“ code, or are marked «N» for narrow.

25N.cm

Instrument Cat. No. Graphics

TIGHTENING INSTRUMENTS FOR Ø 4.8 mm & 4.0 mm STRAIGHT MULTI-UNIT ABUTMENTS

Multi-Unit mandrel for 4.8 mm and 4.0 mmstraight abutments (short and long)

MUM100 MUM100L

Multi-Unit wrench for 4.8 mm and 4.0 mmstraight abutments

MUW100

SURGICAL INSTRUMENT

Angulated drill guide IN GFA

Ø 4.8 AND Ø 4.0 mmPREHENSILE TOOL

Short prehensile tool for Multi-Unit abutment MUWS

MULTI-UNIT PROSTHETIC & SURGICAL INSTRUMENTS

25N.cm

25N.cm

IMPRESSION TAKING COMPONENTS FOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit Pick-up transfer copingSupplied with two green pick-up screws (one short, one long)

MUNT100 (x1)MUNT100-4 (x4)

Narrow Multi-Unit Pop-in transfer coping MUNT200 (x1)MUNT200-4 (x4)

Narrow Multi-Unit Abutment analogSupplied with one MU M1.4 blue screw

MUNA100 (x1)MUNA100-4 (x4)

Composants Référence Visuels

MULTI-UNIT SCREWS FOR Ø 4.8 mm & 4.0 mm MULTI-UNIT ABUTMENTS

MU Black Tite® M1.6 fi nal screwMU M1.6 screw, Blue (x1)MU M1.6 screw, Blue (x4)

OPMU160OPMU161

OPMU161-4

MU Black Tite® M1.4 fi nal screwMU M1.4 screw, Blue

MU140MU141

Multi-Unit Laboratory screw, ShortMulti-Unit Laboratory screw, Long

MUT101MUT102

MULTI-UNIT ADDITIONAL COMPONENTS (all laboratory screws have a “blue“ code)

MULTI-UNIT PROTECTION ANALOGS, Ø 4.8 mm & 4.0 mm

Multi-Unit Protection analog, 4.8 mm(stainless steel)

MUA200 (x1)MUA200-4 (x4)

Multi-Unt Protection analog, 4.0 mm(stainless steel) MUNA200

MULTI-UNIT PROSTHETIC COMPONENTS FOR CAD/CAM RESTORATIONS ON AXIOM® REG/PX

Component Cat. No. Graphics

WAX-UP ACCESSORIESFOR CAD/CAM RESTORATIONS USING Ø 4.8 mm& 4.0 mm MULTI-UNIT ABUTMENTS

Ø 4.8 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUWAXUP (x1)MUWAXUP4 (x4)

Ø 4.8 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUWAXUP-S (x1)MUWAXUP-S4 (x4)

Ø 4.0 mm Multi-Unit Wax-upSupplied with one MU M1.4 blue screw

MUNWAXUP (x1)MUNWAXUP4 (x4)

Ø 4.0 mm Multi-Unit Wax-up and Laboratory screw Supplied with one MU M1.4 blue screw and one long laboratory blue screw

MUNWAXUP-S (x1)MUNWAXUP-S4 (x4)

SCAN-ADAPTERS & SCAN-ADAPTER KITS FOR LABORATORY SCANNERS3

Scan-Adapter for Ø 4.8 mm Multi-Unit abutmentSupplied with fi xation screw

151-03-SAO

Scan-Adapter for Ø 4.0 mm Multi-Unit abutmentSupplied with fi xation screw

151-04-SAO

SA TOOL for fi xation of Scan-Adapter ontomaster model

SA TOOL -01

Scan-Adapter Kit for Axiom® REG/PX platforms.Includes 4 SAA1 for Axiom® REG/PX implants, 6 SAO2 for Axiom® REG/PX Ø 4.8 mm Multi-Unit abutments, and dedicated SA Tool (inserter).

151-02-KIT

PACIFIC COMPONENTSFOR USE WITH Ø 4.0 mm MULTI-UNIT NARROW ABUTMENTS

Narrow Multi-Unit PACIFIC bonding ring Supplied with one MU Black Tite® M1.4 fi nal screw

MUNPAC100

Narrow Multi-Unit PACIFIC analog - Supplied with one MU M1.4 screw and one long laboratory blue screw

MUNPAC110

Narrow Multi-Unit PACIFIC castable copingSupplied with one MU M1.4 laboratory blue screw

MUNPAC120

Narrow Multi-Unit PACIFIC KitIncludes MUNPAC100/110/120

KITMUNPAC -

simeda®

customized &

solutionssolutions

Ø 4.0 mm NARROW MULTI-UNIT AUXILIARY COMPONENTS (“green“ code or “N“)Ø 4.8 MM MULTI-UNIT AUXILIARY COMPONENTS (“yellow“ code)

Axiom® Ø 4.8 mm Multi-Unit Abutments Angulation (ά)Gingival height

(GH)Cat. No. Graphics

Straight abutment (non-indexed)Supplied with a pre-assembled holder

0°

0.75 mm OPMU0-0

1.5 mm OPMU0-1

2.5 mm OPMU0-2

3.5 mm OPMU0-3

4.5 mm OPMU0-4

18° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1 IN

2.5 mm OPMU18-2 IN

3.5 mm OPMU18-3 IN

30° angulated abutment (indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0 IN

1.5 mm OPMU30-1 IN

2.5 mm OPMU30-2 IN

3.5 mm OPMU30-3 IN

18° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

18°

1.5 mm OPMU18-1

2.5 mm OPMU18-2

3.5 mm OPMU18-3

30° angulated abutment (non-indexed)Supplied with a pre-assembled holder and one MU Black Tite® M1.6 fi nal screw

30°

0.75 mm OPMU30-0

1.5 mm OPMU30-1

2.5 mm OPMU30-2

3.5 mm OPMU30-3

NEW2015

CH = 2.5 mm

GH

Ø = 4.8 mm CH = 2.5 mm

Hmax*GH

Ø = 4.8 mm

ά

**CoCr = Cobalt Chromium.

IMPRESSION TAKING USING Ø 4.8 mm MULTI-UNIT ABUTMENTSPICK-UP technique: open tray orPOP-IN technique: closed tray

Multi-Unit pick-up transfer copingSupplied with two yellow pick-up screws (one short, one long)

MUT100 (x1)MUT100-4 (x4)

Multi-Unit pop-in transfer copingMUT200 (x1)

MUT200-4 (x4)

Multi-Unit abutment analogSupplied with one MU M1.4 blue screw

MUA100 (x1)MUA100-4 (x4)

Instrument Cat. No. Graphics

PROSTHETIC COMPONENTSFOR USE WITH Ø 4.8 mm MULTI-UNIT ABUTMENTS

Multi-Unit protective cap (titanium)

Supplied QMUCAP (x1)

MUCAP-4 (x4)

Multi-Unit titanium temporary copingSupplied with one titanium MU M1.4 screw

MUC100

Multi-Unit PEEK temporary copingSupplied with one titanium MU M1.4 screw

MUC200

Defi nitive Multi-Unit castable copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC300

Defi nitive Multi-Unit CoCr** cast-on copingSupplied with one MU Black Tite® M1.4 fi nal screw

MUC400

15N.cm

15N.cm

15N.cm

15N.cm

Manuel

NEW2015

NEW2015

NEW2015

NARROW MULTI-UNIT AUXILIARY COMPONENTS (

HC = 1.5 mm

HG

Ø = 4.0 mmGingival height

(GH)Cat. No. Graphics

0.75 mm OPMUN0-0

1.5 mm OPMUN0-1

2.5 mm OPMUN0-2

3.5 mm OPMUN0-3

4.5 mm OPMUN0-4*NEW2015

NEW2015

15N.cm

15

1-0

3-S

AO

15

1-0

4-S

AO

1 SAA: Scan-Adapter for implant-supported single-unit restorations2 SAO: Scan-Adapter for multiple-unit restorations using conical abutments3 Compatible with Simeda® approved scanners

*Hmax of 18° angled abutments = GH+1.5 mm. Hmax of 30° angled abutments = GH + 2.4 mm.

25N.cm

Black Tite® M1.6fi nal screw OPMU160

SUPPLIEDWITH