ge industrial solutions home and building...
TRANSCRIPT
GEIndustrial Solutions
ge.com/ex/industrialsolutions
Home and Building AutomationHabiTEQ*Wired and wireless
1
HabiTEQ*
HabiTEQ* - Home and Building Automation
Introduction
2 Automation components
4 Advantages
Wired HabiTEQ
5 Controllers
6 Switch modules
7 Input modules
8 Dimmers modules
8 Communication modules
9 Displays
11 BUS sensors
14 Decentralised modules
16 Smart switches
19 Niko frames for smart switches and MDI01
20 Sensors through Input modules from UTC fire and security
Wireless HabiTEQ
26 Wireless HabiTEQ
2
HabiTEQ*H
abiT
EQ w
ired
ANR04Analogue dimmer modulefor fluorescent tubes0-10V
DIM04SA/500UUniversal dimmer module500VA
CTDO3EFull controller with USB & Ethernet
CTD01Mini controller with USB
Automation components• Fast and flexible 2-wire BUS system• Quick and easy configuration• “Plug and play” operation
CTD02EFull controller with USB and Ethernet
ANA04Analogue dimmer module0-10V
3
HabiTEQ*O
verview
ROL02P2 Shutter relay module
with positioning
CTD01Mini controller with USB
Automation components• Fast and flexible 2-wire BUS system• Quick and easy configuration• “Plug and play” operation
INP08/16Input module
INP08/230Input module
REL04SAStand-alone relay module
REL088 Relay module
4
HabiTEQ*H
abiT
EQ w
ired
Flexible BUS topology... star, loop, tree or any combination with no polarity… enables quick and easy installation
CTD xxBUS 1 BUS 2
CTD xxBUS 1 BUS 2
CTD xxBUS 1 BUS 2
System topologies
• 2-wire bi-directional BUS communication.• BUS supplies power to the I/O module and has no polarity• I/O reaction speed: 400 outlets = 0.3 sec• Simultaneous communication• Current based BUS principle = high resistance against external influences• Cable: shielded twisted pair section 2 x 1.0 mm2
Distance max. 200 m (open), max. 400 m (closed)
System overview
LOOP STAR
TREE
Advantages
5
HabiTEQ*M
odules
Controller modules
CTD01 - mini controller USB
Description Ref. No.
One BUS connectionSupply 200mA at 13.8V Built-in thermal protection(When connecting the modules, polarity is not important)On average about 12-15 modules can be connected to the bus. USB port through which the controller can be connected to a computer2GB SD Card (that stores system configuration and can log system events)
678989
CTD01E - mini controller USB and Ethernet
Same specifications as CTD01 controllerAdditional Ethernet port with webserver
678990
CTD01E+ - mini controller USB and EthernetSame specifications as CTD01E controllerExtended supply 400mA at 13.8VOn average about 30 modules can be connected to the bus.
679841
CTD02 - full controller
Two BUS connectionsSupply 500mA at 13.8V per BUS, 1000mA in totalBuilt-in thermal protection(When connecting the modules, polarity is not important)On average 70 modules can be connected to CTD02 (about 35 per BUS).USB port through which the controller can be connected to a computer2GB SD Card (that stores system configuration and can log system events)
678991
CTD02E - full controller USB and Ethernet
Same specifications as CTD02 controllerAdditional Ethernet port with webserver
678992
CTD03E - maxi controller with USB and EthernetThree bus connection of 500mA each (can control on average 110 HabiTEQ modules in total)USB connection+SD card storageEthernet port with built-in web server
679821
6
HabiTEQ*H
abiT
EQ w
ired
Switch modules
REL04SA - stand-alone relay module
Description Ref. No.
Module with five potential-free inputs to connect standard push buttons and four independent outputs set as bistable contacts (ON/OFF) which can handle a max of 16A.
The module can work in stand-alone mode were functions and range work both autonomously (WITHOUT controller, WITHOUT external power supply and WITHOUT any configuration). It can also be connected to a controller to become part of a full-fledged HabiTEQ installation.In case the module is connected to a controller, all outputs and inputs can be configured by means of the HabiTEQ configuration software
Suitable for all switching functions, lighting control, positioning and controlling shutters, power plugs control…
679810
REL08 - relay module
DIN-rail module, suitable for switching(1) eight devices. 8 potential-free CO contacts, each can handle a max of 16A at 230V (cosϕ=1)Each can be allocated an individual function by means of the software
The module can handle all switching functions: mono-stable (bell), bi-stable (on/off), timer, interval, thermostat output, etc.
679010
ROL02P - 4 channel shutter module with positioning
DIN rail module, suitable for controlling and positioning two shutters. The shutter motors connected to the ROL02P must be 230Vac motors, with a minimum load of 40VA and a maximum load of 500VA.
679842
(1) For heavy inductive loads (multiple fluorescent lights) with a high capacity or bipolar applications, modular contactors need to be added. The relay module contact will then activate the coil of the contactor.
Modular contactors - Contax: see the full range of contactors in residential components catalogue
Power supply
Description Cat. No Ref. No
Power supply 18V-2,0A for CTD DIN Rail QA CTLPWS/DIN 679006
7
HabiTEQ*M
odules
Input modules
INP08 - 8-channel input module
Description Ref. No.
DIN-rail mount module for connecting external contacts such as solar/wind detector, motion detector, door switches and push buttons. Eight potential free isolated inputs are providedThe input contacts can be selected and set using the system manager software:- Push button = button is open when inactive (e.g. doorbell).- Normal open = contact is open when inactive.- Normal closed = contact is closed when inactive.- Switch = single-pole conventional switch.
The maximum length of each input is 200 meters. The cable type or its section is irrelevant.
679014
INP16 - 16-channel input module
DIN-rail mount module for connecting external contacts such as solar/wind detector, motion detector, door switches and push buttons. Sixteen potential free isolated inputs are providedThe input contacts can be selected and set using the system manager software:- Push button = button is open when inactive (e.g. doorbell).- Normal open = contact is open when inactive.- Normal closed = contact is closed when inactive.- Switch = single-pole conventional switch.
The maximum length of each input is 200 meters. The cable type or its section is irrelevant.
679015
INP08/230 - 8-channel input module with potential (Vac/Vdc)
DIN-rail module for connecting external contacts such as solar/wind detector, motion detector, door switches and push buttons.There are 8 optically insulated inputs. Each input needs a voltage to be active.This can be:• 12Vac/dc if connected between B and C (consumption approximately 10mA).• 230Vac if connected between A and C (consumption approximately 1W).
If there are inputs with potential-free contacts they can be connected to the module via 12Vac. The required voltage is provided on the top and bottom sides of the input module.
The input contacts can be selected and set using the system manager software:- Push button = button that is open when inactive (e.g. doorbell).- Normal open = contact that is open when inactive.- Normal closed = contact that is closed when inactive.- Switch = single pole conventional switch.
The maximum length for each input is 200 meters. The cable type or its section is irrelevant.
679016
8
HabiTEQ*H
abiT
EQ w
ired
Dimmer modules
Interface modules
DIM04SA/500U - universal dimmer module
Description Ref. No.
The DIM04SA/500U is a DIN-rail module, suitable for dimming 4 loads of 10-500VA. The dimmers operate digitally with 8 bit precision. An optical separation between the inputs and outputs guarantees safe operation.The module can work in stand-alone mode were functions and range work both autonomously (WITHOUT controller, WITHOUT external power supply and WITHOUT any configuration). It can also be connected to a controller to become part of a full-fledged HabiTEQ installation.In case the module is connected to a controller, all outputs and inputs can be configured by means of the HabiTEQ configuration softwareThe DIM04/500U can be used with incandescent lamp, halogene lamps, capacitive loads, inductive loads, certain dimmable energy-savings lamps and dimmable 230V LEDs.
679822
DIM02SA/500U - universal dimmer module
The DIM02SA/500U is a DIN-rail module, suitable for dimming 2 loads of 10-500VA. The dimmers operate digitally with 8 bit precision. An optical separation between the inputs and outputs guarantees safe operation.The module can work in stand-alone mode were functions and range work both autonomously (WITHOUT controller, WITHOUT external power supply and WITHOUT any confi guration). It can also be connected to a controller to become part of a full-fledged HabiTEQ installation.In case the module is connected to a controller, all outputs and inputs can be configured by means of the HabiTEQ configuration softwareThe DIM04/500U can be used with incandescent lamp, halogene lamps, capacitive loads, inductive loads, certain dimmable energy-savings lamps and dimmable 230V LEDs.
Ref. No. will soon be
available
ANA04 - analogue dimmer module
DIN-rail module, suitable for controlling four analog dimmers operating with input voltages of 0-10V or 1-10V (can be selected via HabiTEQ system manager software).The control contains four digital-analogue converters with 8-bit precision.
An optical separation between the inputs and outputs guarantees safe operation. This module can be used for dimming very large capacities.
679017
ANR04 - analogue dimmer module
DIN-rail module, suitable for controlling four analog dimmers operating with input voltages of 0-10V or 1-10V (can be selected via HabiTEQ system manager software).The control contains four digital-analogue converters with 8-bit precision.
An optical separation between the inputs and outputs guarantees safe operation. This module can be used for dimming very large capacities.
Each analogue output controls a relay contact, which releases when the output is on 0.This contact can disrupt the mains voltage so that the fluorescent lamps go out completely.
679018
QDI01 - HabiTEQ DALI interface
Description Ref. No.
DIN-rail module, suitable for controlling a DALI bus. The module cannot be used to program the DALI bus.
The module can control 64 individual addresses and 16 group addresses. Each individual address can be set as master or as slave of the DALI bus. For each individual address and each group address a minimum dimmer level can be set.
Each module has a unique serial number enabling programming anywhere and anytime. All programming remains stored in a non-volatile memory.
679809
9
HabiTEQ*M
odules - Displays
Displays
ViZiR room controller
Description Ref. No.
With the ViZiR room controller you can control one output, a room, a floor or a house in a very simple and intuitive way. The OLED screen displays what you are controlling. Scrolling through the outputs or the control itself can be done via the capacitive cover plate in white or black Corian. The ViZiR contains a temperature sensor which is powered via the bus and fits in a standard flush-mounted socket. The innovative, user friendly HabiTEQ technology now combined with minimalistic design to suit every interior.
QA VIZIR/KW - white 679825
QA VIZIR/KB - black 679826
TSC5.8 - monochrome touchscreen
Display module with an illuminated LCD touch screen for mounting inside the wall. - User-friendly menu allows operating 96 outputs and viewing their status. - Choice between 6 main menus and a random number of outputs can be programmed
under each main menu.- Up to 8 outputs can be operated per screen (=submenu). - Built-in temperature sensor for thermostats function.
679102
TSCBOX
Box for monochrome touchscreen.For mounting the TSC5.8 into the wall.
679103
10
HabiTEQ*Sm
art c
ontr
ols
Displays
Visualisation software
TCPC / NAV10.2 - third party panel PC
Description Ref. No.
On request the GE TEQ center can be provided pre-installed on a touch panel PC hosting Win-XP.The PC comes with power supply.
Frame grey metal 678997
Frame black 679918
Frame white 679919
Flush mounted box system 679917
WPAD - third party tablet PC
WPAD - 11,6" tablet PC with windows home premium, Wi-Fi + docking 679846
QA WPAD 3G - 11,6" tablet PC with windows home premium, Wi-Fi + docking + 3G 679823
TEQHC - Home Center
HMI softwareThe GE home center software runs on any Windows XP, XP embedded or Vista PC and allows control and visualizes a HabiTEQ installation in an intuitive and user-friendly manner. The customer can easily add floor plans or groups and allocate outputs to certain rooms. Standard IP-cameras that support the mjpeg format can easily be connected to the GE Home Center.
678995(1)
QA SIP 01 - plug-in for TEQ Home Center
SIP plug-in (videophone) for TEQ software. To connect SIP compatible videophones and telephones.
679824
Kitchen Storage Bathroom
Bedroom 2
Bedroom 1
Living room Hallway
Kitchen Storage Kitchen Storage
Kitchen StorageKitchen Storage Kitchen Storage
20° 20°20° 20°20°22°21°
18°
Kitchen Living room TV room Office
Master bedroom
18°
Bedroom 1
17°
Bedroom 2
22°22°
Bathroom
20° 20° 21° 16°16°16°16° 16°
16°18°
Kitchen Living room TV room Office
Master bedroom
16°18°
Bedroom 1
16°17°
Bedroom 2
20°22°
Bathroom
16° 16° 16°
Scenes
Everything off
Holliday mode
Economy mode
Floor plans
Attic
2nd floor
1st floor
Basement
Groups
All lights
All heating
Security cams
Basement
Groups
All lights
All heating
Security cams
Basement
Groups
All lights
All heating
Security cams
Scenes
Everything off
Holliday mode
Economy mode
Floor plans
Attic
2nd floor
1st floor
Basement
Groups
All lights
All heating
Security cams
Scenes
Everything off
Holliday mode
Economy mode
Floor plans
Attic
2nd floor
1st floor
Basement
Groups
All lights
All heating
Security cams
Scenes
Wake up
Away
Back from school
Go to sleep
Scenes
Wake up
Away
Back from school
Go to sleep
Scenes
Everything off
Holliday mode
Economy mode
Floor plans
Attic
2nd floor
1st floor
Basement
Groups
All lights
All heating
Security cams
16°20°
Bathroom
Target tempCurrent temp
Comfort22°
Economic20°
Night16°
Away06°
22°20°
Bathroom
Target tempCurrent temp
Comfort22°
Economic20°
Night16°
Away06°
TEQ Home Center
Home Control
Friday 6 March 2009 - 17:08
Extras
Home Control
Friday 6 March 2009 - 17:08
Extras
Home Center
Home Control
Friday 6 March 2009 - 17:08
Extras
TEQ Home Center
Home Control
Friday 6 March 2009 - 17:08
Extras
TEQ Home Center
Home Control
Friday 6 March 2009 - 17:08
Extras
TEQ Home Center
Home Control
Friday 6 March 2009 - 17:08
Extras
Kitchen
FOCUS AREA
20° 20°20° 20°20°22°21°
18°
Kitchen Living room TV room Office
Master bedroom
18°
Bedroom 1
17°
Bedroom 2
22°22°
Bathroom
16° 16° 16°
Basement
Groups
All lights
All heating
Security cams
Scenes
Wake up
Away
Back from school
Go to sleep
Home Control
Friday 6 MarcFriday 6 March 2009 -h 2009 17:0817:08
Extras
FOCUS AREA
20° 20° 21° 16°16°16°16° 16°
16°18°
Kitchen Living room TV room Office
Master bedroom
16°18°
Bedroom 1
16°17°
Bedroom 2
20°22°
Bathroom
Basement
Groups
All lights
All heating
Security cams
Scenes
Wake up
Away
Back from school
Go to sleep
H CHome Center
Home Control
Friday 6 MarcFriday 6 March 2009 -h 2009 17:0817:08
Extras
FOCUS AREA
16°20°
Bathroom
Target tempCurrent temp
Comfort22°
Economic20°
Night16°
Away06°
FOCUS AREA
22°20°
Bathroom
Target tempCurrent temp
Comfort22°
Economic20°
Night16°
Away06°
FOCUS AREA
Kitchen
FOCUS AREA
(1) TEQ HC software KEY 1 license
11
HabiTEQ*Soft w
are - Sensors
Bus sensors
SEN 04 MLT/EYE - motion, light and temperature sensor IP65
Description Ref. No.
A multifunctional detector for wall or ceiling mounting, for indoor or outdoor use (IP65) which can detect temperature, light level and temperature and which can control 4 outputs based on one or a combination of these measured values. It could be used for e.g. to turn on the lights when there’s movement and the light level is lower than X, or roll out the sunscreens when the light level is more than Y and the temperature is higher than 22 C°.
Bus-sensor for temperature, light, PIR motion in IP65 surface mount housing.
679828
MDI01 - motion and lights sensor - indoor
Wall or ceiling mount module that can detect motion and light. The detector is integrated in a built-in frame with claw attachment and is connected to the HabiTEQ bus (no polarity). The motion detector has a range of approximately 7m at an angle of 110 degrees.
The system manager software allows you determine whether the output is a combination of motion AND light or only motion or only light(1).
White 679084
Black 679092
Metallic 679100
(1) Light dependent: Control of lighting in shop windows, offices, car parking areas, sunblinds, shutters, or even lighting in a home. Features: user presettable switch light intensity, intensity range and hysteresis (to avoid on/off instable behaviour). Reaction time is also user presettable. 1 channel, 2 channels and 1 channel with incorporated digital time switch with week-cycle, all with separate photocell are available besides a 1 channel all-in-one device. Function: Electronic switch controlled by the intensity of the ambient light, detected by a separate or integrated photocell (depending on the model). When the light intensity drops below the threshold setting, the switch changes its state to the on position. An increasing ambient light intensity eventually will switch off the device again. Light Sensitive Switches - GALAX LSS: see the full range of contactors in residential components catalogue
AIR01CHT - air quality detectors
Combined sensors CO2, temperature and humidity -BUS connected
AIR01CT Measures the CO2 concentration and temperature in the living space. The value measured can be used by the controller to activate a valve of a ventilation system, open or close a window via a motor, etc. in order to optimally aerate the space.
678999
AIR01CHT Measures the CO2 concentration, temperature and humidity in the living space. The value measured can be used by the controller to activate a valve of a ventilation system, open or close a window via a motor, etc. in order to optimally aerate the space.
679847
AIR01HT Measures the temperature and humidity in the living space. The value measured can be used by the controller in order to provide optimal room climate.
679848
12
HabiTEQ*Sm
art c
ontr
ols
Bus sensors (continued)
SEN01 - stand-alone, bus-powered and –controlled module
Description Ref. No.
SEN01T - Temperature sensor for flush mounting 679830
SEN01MW - Motion and light sensor for flush mounting, white sensor 679831
SEN01MB - Motion and Light sensor for flush mounting, black sensor 679832
CPL SEN01T/101 - Central plate, drilled, Niko white color for SEN01T 679834
CPL SEN01T/122 - Central plate, drilled, Niko anthracite color for SEN01T 679812
CPL SEN01MW/101 - Central plate, drilled, Niko white color for SEN01MW 679813
CPL SEN01MB/122 - Central plate, drilled, Niko anthracite color for SEN01MB 679814
SEN01MW/RMW - White motion and Light sensor in white metal housing for flush mounting 679815
SEN01MB/RMB - Black motion and Light sensor in black metal housing for flush mounting 679816
13
HabiTEQ*Sensors
Bus sensors (continued)
SEN04ML/RMW - motion and light detector
Description Ref. No.
Motion detector with adjustable angle and an integrated light cell. Integrated in a built-in frame with springs and provided with a bus connection with connector (no polarity).The motion detector has a range of approx. 7m at an angle of 110°. The light cell is positioned internally.The system manager software allows the user to determine the output as:• Combination of motion AND light• ONLY motion or ONLY lightUser can program up to 4 outputs (only toggle). Every output must be activated by one or more actions. Actions for activating the output:• Alarm, when there is a certain level of continuous movement (5 seconds)• Light, the amount of light is less than the value setAll outputs still can be controlled by other inputs. With the timers, the time can be set during which the outputs will be activated (extension).
679808
ECM - Energy Counter Module
Module which counts and processes pulses received from a pulse meter. Any pulse pulse meter with potential-free contacts can be connected to the ECM which can receive a pulse every 250ms. Alarms can be triggered based on a set number od pulses.The input contacts can be selected and set using the HabiTEQ configuration software having: push-buttons, normal open and normal closed. Each module has 1 unique serial number for programming via the HabiTEQ configuration software.The maximum length between the ECM and the input is 1m.Four low-current LEDs can be connected to show the status of the mode that has been selected.
679811
Universal Remote Control
Description Cat. No Ref. No
Universal remote control for wireless communication via IR (infrared) QA URC01 679105
14
HabiTEQ*Sm
art c
ontr
ols
Decentralised modules
IRG04 - infrared generator
Description Ref. No.
The IRG04 module is able to generate any IR code and transmit it to any device. This module makes it possible to control infrared operated devices such as a DVD player, music system, and shutters, aircon fan coil, TV. Each module has 4 different outputs, which can all send 16 different IR-codes.
The required infrared codes need to be entered in the HabiTEQ™ SDB database by sampling them through an infrared switch with 4 buttons (SWC04I/MI) or a thermostat infrared display (THI01). The codes are stored in a non volatile memory.
The IRG04 has 4 low power IR LED outputs. The IR LED attached to the included cables (2m) must be mounted immediately in front of the controlled device.
All infrared codes can be sent using a SWC04I/MI, THI01, infrared remote control, TSC5.8”.
Includes 1-IR LED emitter with 1m cable.
679101
BUS
1xIR 1m
LED10 - leds for INP02 and Niko stile push-button
Description Ref. No.
QA LED10/NR - red LED for Niko push-button on INP02/04 679817
QA LED10/NG - green LED for Niko push-button on INP02/04 679818
QA LED10/NW - white LED for Niko push-button on INP02/04 679819
QA LED10/NB - blue LED for Niko push-button on INP02/04 679820
Serial audio interface
Description Ref. No.
SER10NIKO cream 100 series + cable 679083
NIKO sterling 121 series + cable 679091
NIKO anthracite 122 series + cable 679099
CLC01 - constant light control dimmer
Constant light control dimmer - CLC01 679914
The CLC01 ensures the desired light level remains constant in every room by adapting the lighting to the intensity of the natural light. The CLC01 is supplied and controlled via the HabiTEQ two-wirebus. The required light level can be set with the HabiTEQ configuration software. A light sensor on the CLC01 continuously measures the light level. The difference between the desired and effective light level is adjusted by the CLC01 that dims the connected lighting to Maintain the light level in the room at the required level.A galvanic separation between the bus and the output guarantees its safe operation. The CLC01 has an adjustable output (via the system manager software): 0-10V (sourcing - max 5mA) or 1-10V (sinking - max 100mA) that can be connected to one or more lighting fixtures.
ANA01/REL02/ROL01 - Decentralised dimmer, relay, shutter output
ANA01 - analog dimmer 1 channel - 0/1-10V-QB 678998
ROL01 - the central shutter module, 1 inlet 679827
REL02 - the central relay module (2x8A) for flush mounting 2 inlets, 2 LED outlets 679829
15
HabiTEQ*M
odules
Input modules for any switch interface
INP02/04 - input modules
Description Ref. No.
2-channel input module(1) 6789964-channel input module 679013Module for connecting regular switch. Or external contacts such as detectors, door switches, magnetic contacts for doors or windows, etc.
The input contacts can be selected and set using the PC software:- Push button = button is open when inactive (e.g. doorbell).- Normal open = contact is open when inactive.- Normal closed = contact is closed when inactive.- Switch = single pole conventional switch.4-LED connections, which can be used to indicate the status of each input.
(1) on request
The INP02/04 is a miniature yet versatile input module that offers the flexibility to interface any push-button switches to the HabiTEQ automation system. The size of the modules enables the mounting of the module in most of the current switch boxes.
16
HabiTEQ*Sm
art c
ontr
ols
SWC04 - 4-button smart switch
Description Ref. No.
• Available in 4 standard colours(1)
• Further options upon request• Cover plate to be ordered separately(2)
A 4 push-button electronic smart switch with 4 RGB LED integrated into a Niko® built-in frame with claw attachment. A BUS connection with connector (no polarity) is provided and supplies the power and control of the module.
One push-button can operate 1 output, 2 scenes (short or long push) and up to 16 scenes.
Simultaneous press on any of two keys enables entry into second page, where 4 more outputs are available. So in total upto 8 outputs can be controlled through this module.
Each of the 4-LED gives feedback according to the status of the corresponding output. The colour and the brightness can be set via the software.
White colour 679023
Cream colour 679077
Sterling colour 679085
Anthracite colour 679093
SWC04T - 4-button smart switch with thermostat
Description Ref. No.
• Available in 4 standard colours(1)
• Further options upon request• Cover plate to be ordered separately(2)
In addition to functionality of a standard 4-button switch this version of the smart switch also host thermostat functionality, including built-in temperature sensor.
Five different programs:- Manual- Freeze- Economy- Comfort - Night
Can be activated through the keys. Each program has its own temperature setting that can be set in the HabiTEQ system manager. The LED and the appropriate colour are used to indicate the present program running, which is also settable in the HabiTEQ system manager.
White colour 679027
Cream colour 679079
Sterling colour 679087
Anthracite colour 679095
Smart switch
(1) Other colour options on request. Lead times apply.(2) Cover plates are not part of the switch, see page 19.
17
HabiTEQ*Sm
art switches
Smart switch (continued)
SWC04I - 4-button smart switch with Infrared receiver
Description Ref. No.
• Available in 4 standard colours(1)
• Further options upon request• Cover plate to be ordered separately(2)
In addition to functionality of a standard 4-button switch this version of the smart switch also host s an Infrared receiver.
It can control upto 12 outputs/scenes with a universal infrared remote control. The first 4 infrared codes are always used for the function of the 4 push-buttons. The other 8 channels can be assigned to any other output.
The infrared codes can be sampled taught with this switch or they can be downloaded from the database.
White colour 679026
Cream colour 679078
Sterling colour 679086
Anthracite colour 679094
SWC04M - 4-button smart switch with motion sensor
Description Ref. No.
• Available in 4 standard colours(1)
• Further options upon request• Cover plate to be ordered separately(2)
In addition to functionality of a standard 4-button smart switch SWC04, this module contains a motion detector with an integrated light cell.
The range is approximately 7m at an angle of 110 degrees. The light cell is assembled next to the detector.
The motion detector is automatically linked to the function of push-button 1.
The HabiTEQ system manager allows you to determine the priority between push button 1 and the detector. At the same time you can indicate the level of movement at which the detector needs to detect together with the light level.
White colour 679028
Cream colour 679080
Sterling colour 679088
Anthracite colour 679096
(1) Other colour options on request. Lead times apply.(2) Cover plates are not part of the switch, see page 19.
18
HabiTEQ*Sm
art c
ontr
ols
Smart switch (continued)
SWC04MT - 4-button smart switch with motion sensor and thermostat
Description Ref. No.
• Available in 4 standard colours(1)
• Further options upon request• Cover plate to be ordered separately(2)
In addition to functionality of a standard 4-button smart switch SWC04, this module contains a motion detector with an integrated light cell and a thermostat with built-in temperature sensor.
White colour 679030
Cream colour 679082
Sterling colour 679090
Anthracite colour 679098
(1) Other colour options on request. Lead times apply.(2) Cover plates are not part of the switch, see page 41.
19
HabiTEQ*Sm
art switches
Niko® ORIGINAL - flush surround plates
Colour Pack Ref. No. Niko-code
Cream(1) 10 679920 100-76100White(2) 10 679921 101-76100White 2 modules 10 679853 101-76200White 3 modules 10 679854 101-76300Light grey(3) 10 679922 102-76100Silver(4) 10 679923 103-76100Greige(5) 10 679924 104-76100
Niko® INTENSE - flush surround plates
White(1) 1 679925 120-76100White 2 modules 1 679849 120-76200White 3 modules 1 679851 120-76300Sterling(2) 1 679926 121-76100Anthracite(3) 1 679927 122-76100Anthracite 2 modules 1 679850 122-76200Anthracite 3 modules 1 679852 122-76300Bronze(4) 1 679928 123-76100Silver(7) 1 679931 127-76100
Niko® PURE - flush surround plates
Stainless steel for anthracite(1) 1 679934 150-76100Natural red(2) 1 679935 152-76100Natural white(3) 1 679936 151-76100Bamboo(4) 1 679938 156-76100Alu black(5) 1 679940 158-76100Alu grey(6) 1 679937 155-76100Champagne steel(7) 1 679939 157-76100Stainless steel for white(8) 1 679941 250-76100
Smart switch - frame types
+
+ or
or
+
(1)
(1)
(2)
(2)
(7)
(3)
(3)
(8)
(4)
(4)
(9)
(5)
(5)
(1)
(6)
(2)
(7)
(3)
(8)
(4) (5)
20
HabiTEQ*Sm
art c
ontr
ols
Passive infrared sensors
Description Ref. No.
General purpose passive infrared sensors that can operate stand-alone or be linked to the system via an input module. The sensors need a separate power supply (9-24V).
EV100Sensor with settable range of 5 or 10m • Angle of view 86° with 5 curtains• Adjustable field of view with mounting bracket SB01• NC contact
679943
EV100-PIPet immune version (the sensor is immune to movement of a pet up to 20kg) 679944
EV1012(1)
Volumetric sensor with range 12m • Angle of view 86° with 9 curtains• NC contact when energized
679946
EV1012PI(1)
Pet immune version (the sensor is immune to movement of a pet up to 15kg) 679947
VE1120 Volumetric sensor with range 20m• Angle of view 86° with 11 curtains• Adjustable field of view with mounting bracket SB01• NC contact when energized
679803
VE735Sensor with settable range of 60 or 20m• Angle of view 86° with 11 curtains & 5º, 1 curtain• Adjustable fi eld of view with mounting bracket SB01• NC contact when energized
679807
EV669Ceiling mounted sensor - 10m range• Angle of view settable to 180 or 360° with 18 curtains• NC contact, voltage free relay
679949
(1) Please consult us.
Outdoor passive infrared detector
Description Ref. No.
The sensors need a separate power supply (9-15V).• To be linked on input module
6910PStand-alone external sensor -15m• Hidden sensor module• 14º to 70º detection angle• 90º pan and 45º tilt for flexible install• High dust and humidity resistance (IP65)
679804
Compatible sensor range from GE Security (now UTC Fire and Security)
21
HabiTEQ*Sm
art sensors
Dual detector based sensors
Description Ref. No.
Sensors with dual detection technology, combining Infrared and microwave detection to provide high quality precise detection. The sensors need a separate power supply (9-24V).• To be linked on input module
DD1012Sensor with settable range of 4/6/9/12m• Angle of view 78° with 9 curtains• NC contact when energized• Adjustable field of view with mounting bracket SB01
679805
DD1012PIPet immune version to movement of a pet up to 18kg (35cm height) 679953
DD669(1)
Ceiling mounted sensor• Angle of view 360° with 18 curtains• Adjustable range 12 or 20m• NC contact, voltage free relay
679955
SB01Wall or ceiling mount bracket for EV and DD series
679998
360FMCeiling mount bracket for EV669 and DD669 sensors
679999
12m volumetric PIR motion sensor
EV105The EV 100 series has been designed specifically for residential/short range. Gliding Focus Curtains ensure that you have simple commissioning with perfect detection every time. The EV 100 series enables rapid installation due to the plug-in electronics and provides sharp detection every time while guaranteeing excellent false alarm immunity with the highest quality• “Step and Gliding Focus Multi Curtain” mirror optic• Plug-in electronics• Sealed optics• ASIC with “4D” processing• Selectable range with full undercrawl detection• Additional bi-curtain processing for harsh environments• No adjustment require for different mounting heights• Tolerates wall angle deviation• Complies with EN50131-2-2
679945
22
HabiTEQ*Sm
art c
ontr
ols
Door and window contacts
Description Ref. No.
The contacts have to be linked on input modules
DC101Surface mount window-door contact, wired• 15mm standard operating gap• White colour• NC contact
679968
DC101BSurface mount window-door contact, wired• 15mm standard operating gap• Black colour• NC contact
679969
DC102Surface mount window-door contact with screw terminals• 18mm standard operating gap• White colour• NC contact
679970
DC102BSurface mount window-door contact with screw terminals• 18mm standard operating gap• Black colour• NC contact
679971
DC123Surface mount window-door contact with screw terminals• 18mm standard operating gap• CO contact
679972
DC137Surface mount window-door contact with screw terminals • 37mm wide operating gap• NC contact
679973
DC141Surface mount window-door miniature contact, self-adhesive, wired • 25mm standard operating gap• NC contact
679974
DC108S1Surface mount overhead floor mount contact, wired - armored cable • 75mm standard operating gap• NC contact
679975
DC106Recessed mount contact wired, flanged housing• 12mm standard operating gap• NC contact
679976
DC127Recessed mount contact, wired, press-fit• 31mm wide operating gap• NC contact
679977
23
HabiTEQ*D
oor and window
contacts
Recessed roller plunger contact
DC113Used to protect a variety of doors and windows, recessed mounting hides the contact within the frame of the door or window it protects. It can also be used to protect high-value objects on display by placing the object on the recessed contact.• Ideal for residential doors• Works as a plunger or ball switch• Flanges for reliable, positive retention
679980
Door and window contacts (continued)
Description Ref. No.
DC120Recessed mount contact wired, stubby press-fit• 18mm wide operating gap• NC contact
679978
DC105Recessed mount contact, wired, bare magnet• 12mm standard operating gap• The DC105-contact with its small diameter (64mm) is ideal for NC contact
679979
MM108Surface overhead - angle mount contact
679982
MM115Surface mount contact - wired
679984
DC193L-bracket for DC102, DC104, DC123, DC137
679985
(1) Please consult us.
Description Ref. No.
Sensors linked through input modules. Separate power supply needed (9-24V).Smoke sensors
DP721R(1)
Photoelectric smoke detector with field exchangeable optical chamber as well as a built-in relay for local switching applications• CO relay output
679956
DP721RT(1)
Photoelectric heat and smoke detector• With field exchangeable optical chamber and local relay output facilities
679957
DP721RTA(1)
Photoelectric smoke and heat detector with relay output, auto reset679958
Safety sensors
24
HabiTEQ*
Stand alone battery powered smoke detector
562NSE• With on board sounder• Local silence and test function• Full EN14604 approval• Self-diagnostics monitor sensitivity and operational status• Replaceable optical chamber for easy maintenance
679950
Glass break sensor
GS930Acoustic glass break detector - 3x3 technology• Semiconductor relay opens on alarm
679964
GS905Handheld acoustic glass break tester with real glass break sounds• Different settings depending on kind of glass to be protected
679965
SirensAS270Indoor siren, 1 tone - without flash
679994
AS271Indoor siren, 1 tone - with flash
679995
Moisture processor5501-MResponds to the presence of water and non-flammable conductive liquids and to be connected in the closed loop of an alarm system.• No external power required• Sensor circuit totally isolated by optical couplings• Connect up to 4 sensors per 5501-M moisture processor
679966
Surface mount moisture sensor5515-GDetects presence of water and non-flammable conductive liquids and to be connected to a 5501-M moisture processor
679967
Smar
t con
trol
s
Safety sensors (continued)
Description Ref. No.
DB702Conventional fire detector base used for all 700 series conventional fire detectors. • Includes a normally closed continuity switch to allow easy cable testing during installation
679997
211Replacement optical chamber for 700 series detectors
679996
25
HabiTEQ*Safety sensors
Contacts
Description Ref. No.
Mini magnetic pull-apart cordsDC501Used to protect valuable free-standing items that are stored outdoors. The high impact plastic housing protects the contact from corrosion or high resistance build-up. An alarm condition is created when the cord with the magnet is pulled from the housing.• Superior quality and easy installation• Standard 2m wire length• Tamper loop provided
679981
Recessed mount contact-flanged, wiredMM110• Robust design with ABS body• 4 wire connection with easy installation• Passive tamper• Fully encapsulated• Long life Rhodium contact
679983
Safety accessories
Description Ref. No.
Panic buttonsHB191(1)
Personal attack switch - single button• NC contact
679986
HB194(1)
The HB194 personal attack switch incorporates a mechanical double button • Supplied with a key reset
679987
26
HabiTEQ*H
abiT
EQ W
irel
ess
HabiTEQ* WirelessThe built-in power measurement in every actuator transmits energy data to the smart gateway.
Remote energy management
Energy management for workstation and appliances
Energy efficient heating control
Lighting energy management with universal dimmers
27
HabiTEQ*Applications
100% compatible with HabiTEQ through bi-directional gateway.
Energy saving with optimized use of daylight
Temperature regulation by fan coil control
Energy saving with occupancy sensors
Bi-directional wireless gateway
Advanced energy control scenarios with CTD controllers
Wireless and wired optionsfor shutter control
28
HabiTEQ*H
abiT
EQ W
irel
ess
Wir
eles
s w
indo
w c
onta
ct
Wire
less
tem
pera
ture
sen
sor
Wir
eles
s sw
itch
Wir
eles
s in
put m
odul
e
Hab
iTEQ
con
trol
ler
Ener
gy lo
ggin
g w
ith g
atew
ay
Thir
d pa
rty
EnO
cean
sen
sors
Cat. No. Ref. No.
Basic (line and neutral connection required) X - X X X - X W1R1NB 679858
Basic (with or without neutral connected) X - X X X - X W1R1LB 679860
Temperature management (line and neutral connection required) X X - - X - - W1R1NT 679859
Power measurement (line and neutral connection required) X - X X X X X W1R1NP 679861
Multifunction (line and neutral connection required) X - X X X X X W1R1NM 679862
Transmitter
Mode
Wir
eles
s w
indo
w c
onta
ct
Wire
less
tem
pera
ture
sen
sor
Wir
eles
s sw
itch
Wir
eles
s in
put m
odul
e
Hab
iTEQ
con
trol
ler
Ener
gy lo
ggin
g w
ith g
atew
ay
Thir
d pa
rty
EnO
cean
sen
sors
Cat. No. Ref. No.
Basic X - X X X - X W1R10NB 679863
Temperature management X X - - X - - W1R10NT 679864
Power measurement X - X X X X X W1R10NP 679865
Multifunction X - X X X X X W1R10NM 679866
Transmitter
Mode
One channel solid-state wireless actuator - 1A
Description
One channel 1A wireless actuator suitable for controlling various electrical loads, most typical being lighting loads.The actuator has both 2 and 3 wires connection options.The loads are controlled using solid-state switching device, hence the actuator is noise and wear free. The operation or control of the device can be carried out by multiple wireless transmitters. The behaviour of the actuator depends on the selected mode and the transmitting device taught in. The actuator also has the option of localcontrol using a snap-on rocker kit available in multiple colours.
One channel wireless actuator - 10A
Description
One channel 10A wireless actuator suitable for controlling various electrical loads, most typical being lighting loads and electromechanical valves(ON/OFF) used in heating regulation.The actuator has a 3 wire connection system.The loads are controlled via a long-life electromechanical relay. The operation or control of the device can be carried out by multiple wireless transmitters. The behaviour of the actuator depends on the selected mode and the transmitting device taught in. The actuator also has the option of local control using a snap-on rocker kit.
HabiTEQ Wireless
29
HabiTEQ*Actuators
Wir
eles
s sw
itch
Hab
iTEQ
con
trol
ler
Ener
gy lo
ggin
g w
ith g
atew
ay
Thir
d pa
rty
EnO
cean
sen
sors
Cat. No. Ref. No.
Basic (with or without neutral connected) X X - X W1D1LB 679867
Power measurement (line and neutral connection required) X X X X W1D1NB 679868
Transmitter
Mode
Wir
eles
s w
indo
w c
onta
ct
Wire
less
tem
pera
ture
sen
sor
Wir
eles
s sw
itch
Wir
eles
s in
put m
odul
e
Hab
iTEQ
con
trol
ler
Ener
gy lo
ggin
g w
ith g
atew
ay
Thir
d pa
rty
EnO
cean
sen
sors
Cat. No. Ref. No.
Basic X - X X X - X W2R10NB 679869
Temperature management X X - - X - - W2R10NT 679870
Power measurement X - X X X X X W2R10NP 679871
Multifunction X - X X X X X W2R10NM 679872
Transmitter
Mode
One channel wireless universal dimmer - 250W
Description
One channel 250W wireless universal dimmer suitable for controlling various lighting loads.The device has both 2 and 3 wire connection options.The operation or control of the device can be carried out by multiple wireless transmitters. The behaviour of the actuator depends on the selected mode and the transmitting device taught in. The device also has the option of local control using a snap-on rocker kit available in multiple colours.
Two channel wireless actuator - 6A
Description
Two channel 6A wireless actuator suitable for controlling various electrical loads, most typical being lighting loads, electromechanical valves (ON/OFF) used in heating regulation and tubular motors used for blind control.The actuator has a 4 wire connection system.The loads are controlled via a long-life electromechanical relay. The operation or control of the device can be carried out by multiple wireless transmitters. The behaviour of the actuator depends on the selected mode and the transmitting device taught in.The actuator also has the option of local control using a snap-on rocker kit.
30
HabiTEQ*H
abiT
EQ W
irel
ess
Wir
eles
s w
indo
w c
onta
ct
Wire
less
tem
pera
ture
sen
sor
Wir
eles
s sw
itch
Wir
eles
s in
put m
odul
e
Hab
iTEQ
con
trol
ler v
ia g
atew
ay
Ener
gy lo
ggin
g w
ith g
atew
ay
Thir
d pa
rty
EnO
cean
sen
sors
Plug type Cat. No. Ref. No.
Basic X - X X X - X
Schuko
W1R16SB 679873
Power measurement X - X X X X X W1R16SP 679874
Basic X - X X X - X
French
W1R16FB 679875
Power measurement X - X X X X X W1R16FP 679876
Basic X - X X X - XBritish
W1R16UB 679877
Power measurement X - X X X X X W1R16UP 679878
Transmitter
Mode
Plug-in wireless actuator - 16A (Available for Schuko, French and UK type sockets)
Description
Plug-in wireless actuator suitable for controlling and tracking power consumption for various electrical loads, most typical being home appliances and other IT equipment.The device is specially designed to be plugged directly into existing standard electrical outlet or socket simplifying the installation. The load to be controlled can be plugged directly into the module.The device has a 3 wire connection system.The loads are controlled via a long-life electromechanical relay. The operation or control of the device can be carried out by multiple wireless transmitters. The socket is available in three different versions to cover the majority of the market needs.
French
Schuko British
31
HabiTEQ*
12Vdc - 2 channels 230Vac - 2 channels
Description Normally open / Closed sensing
Toggle sensing
Counter Normally open / Closed sensing
Toggle sensing
Counter Repeating capability
Cat. No. Ref. No.
Basic +
X X - X X - X W4IDI 679879
Counter +
- - X X X - X W4ICDI 679880
Multifunction1 + 2 or 2 + 3
X X X X X - X W4ICDIM 679881
Actuators
4 channel wireless input module
Description
Extremely versatile four channel wireless input module used to detect external signal (typically ON/OFF) from detectors, push buttons or conventional switches.Available in multiple configurations to suit your application needs. They exist in 3 different hardware configurations to support different customer needs and fit conveniently into the smallest places, particularly like existing switch boxes fastened by screws or claws. The installer has the option of clicking on or sealing the node with a blank plate.Basic setup can be made without using a PC just by using a combination of 6 push-buttons guided by 4 LEDs.
Input channel Input configuration Wireless output
2 X 12Vdc input2 channels, each input up to 12Vdc
-NO = Normal open (contact that is open when inactive)
-NC = Normal closed (contact that is closed when inactive)
-Toggle = single-pole conventional switch
Transmits status using standard EEP
2 X 230Vac input2 channels, each input up to 230Vac
Two inputs 12Vdc can be configured as two channels which can record pulses from external energy meters
Fixed to max. 5 pulses per secondTransmits aggregated pulse count every 15 minutes
1
1
2
2
2
3
3
32
HabiTEQ*
Description Pictures Cat. No. Ref. No.
Single rocker wireless switch - White WSW02W 679882
Single rocker wireless switch - Black WSW02B 679883
Single rocker wireless switch - Cream WSW02C 679884
Single rocker wireless switch - Sterling grey WSW02G 679885
Double rocker wireless switch - White WSW04W 679886
Double rocker wireless switch - Black WSW04B 679887
Double rocker wireless switch - Cream WSW04C 679888
Double rocker wireless switch - Sterling grey WSW04G 679889
Hab
iTEQ
Wir
eles
s
Switch with assembly frame- Power is derived by the mechanical push action- Wireless telegram is transmitted when pressed- Multiple mounting options: switch box or designer surfaces
Wireless batteryfree switches
Description
The new HabiTEQ switch range based on EnOcean technology can be used to control a range of functions including lighting, electric blinds and trigger scenarios when combined with the 2-wire bus system. They can be located anywhere in the installation and are ideal for buildings with glass partitions to enhance the aesthetic appeal.Each reference include: switch, Rocker, assembly frame and adhesive.Rockers are available in 4 colours. Cover plate must be ordered separately; there is a wide choice of cover plates available to complete the assembly with an elegant finish.
• No maintenance• Eco-friendly!
Unrivaled flexibility
Rocker (single or double)
Cover plate (ordered separately)
Assembly frame
33
HabiTEQ*
Description Pictures Cat. No. Ref. No.
Single rocker wireless switch - White WSW02W 679882
Single rocker wireless switch - Black WSW02B 679883
Single rocker wireless switch - Cream WSW02C 679884
Single rocker wireless switch - Sterling grey WSW02G 679885
Double rocker wireless switch - White WSW04W 679886
Double rocker wireless switch - Black WSW04B 679887
Double rocker wireless switch - Cream WSW04C 679888
Double rocker wireless switch - Sterling grey WSW04G 679889
Batteryfree switches
Wireless batteryfree window contact
Description Cat. No. Ref. No.
A wireless magnetic contact, powered by a solar cell, that doesn’t need any maintenance. Integrated energy storage allows operation for several days, even in total darkness.The contact is very small. This means that the magnet contact is discretely mountable at every window frame made of aluminium, plastic or wood, with a 2-sided stick tape.The device supervises an integrated reed contact and reports every status change immediately (open<>closed). In addition a sign of life signal is sent around every 20-30 minutes.A typical application of the device is to control heating switching receivers when windows are opened unintentionally.
WCW 679890
1 channelactuator
1A and 10A
2 channelactuator
6AHabiTEQ
controller
Thirdparty EnOcean receivers Cat. No. Ref. No.
- No setting dial X - X X WTSND 679891
- For heating- With dial- Setting range:
+19 up to +29°C
X - X X WTSHD 679892
- For cooling- With dial - Setting range:
+15 up to +25°C
X - X X WTSCD 679893
- For heating and cooling- With dial- Setting range:
+15 up to +29°C
X X X X WTSFD 679894
Transmitter
Receiver
Wireless temperature sensor
Description
The wireless temperature sensor measures and transmits ambient room temperature and user set point values periodically. The device utilizes a solar cell to derive power for its operation, hence requiring no batteries for operation. The device is capable of operating up to 4 days in total darkness once fully charged. The device requires no wired connections, easily mounts to a wall and can control multiple actuators. The device also has a battery holder for optional use of batteries, when being used in locations where there is no light (e.g. basement).
34
HabiTEQ*H
abiT
EQ W
irel
ess
Description Cat. No. Ref. No.
Smart gateway - advanced control WGH 679895
Smart gateway - energy management WGW 679896
Smart gateway - multifunction (advanced control + energy management)
WGHW 679898
Web management activation code WEBLNK 679913
Gateway power supply cable (2m) 1890717 679899
Bi-directional smart gateway
Description
Smart gateway – advanced controlThis version of the gateway creates an interface between the GE wireless devices (sensors, control modules and inputs) with the 2–wire bus system, enabling a complete networked solution. The gateway enables the CTD range of controllers to communicate and control the different wireless switching receivers.
Benefits- Ultimate flexibility to realize the optimal system solution combining best of both worlds.- The powerful controller helps realize advanced functions (timers, logic, scenes and more)
Smart gateway – energy management This version of the gateway creates an interface between the GE wireless devices installed in the building or home (sensors, control modules and inputs) and the remote and energy management server. Data related to energy signature and device status are logged periodically on the web-based server and made available to registered users from any remote or local location. Any web-enabled smart device (e.g. smartphones, tablets etc…) can be used to browse the data securely. An activation code is provided to activate the remote energy management service through the internet.
Benefits- Remote or local access to graphically intuitive energy and data device via any web browser- Historical usage trends for up to 10 years with energy data stored on local USB memory
35
HabiTEQ*G
ateway - Rocker kits
Description Picture Ref. No.
One channelactuator
1A
One channelactuator
10A
Two channelactuator
6A
One channeldimmer250W
Four channel
input module
Single rocker kit for 1 channel actuators white 679900 SWR1W X X - X -
Single rocker kit for 1 channel actuators black 679901 SWR1B X X - X -
Single rocker kit for 1 channel actuators cream 679902 SWR1C X X - X -
Single rocker kit for 1 channel actuators sterling grey 679903 SWR1G X X - X -
Double rocker kit for 2 channel actuators white 679904 SWR2W - - X - -
Double rocker kit for 2 channel actuators black 679905 SWR2B - - X - -
Double rocker kit for 2 channel actuators cream 679906 SWR2C - - X - -
Double rocker kit for 2 channel actuators sterling grey 679907 SWR2G - - X - -
Blank plate white 679908 SWBW X X X X X
Blank plate black 679909 SWBB X X X X X
Blank plate cream 679910 SWBC X X X X X
Blank plate sterling grey 679911 SWBG X X X X X
Cat. No.
Compatible actuators
Rocker kits and blank plates (For wireless actuators and input modules)
Description
The rocker kits and blank plates can be mounted directly onto the wireless actuators. This facilitates local operation in addition to remote operation.
Cover plate (ordered separately)
Rocker (single or double) or blind plate
36
HabiTEQ*H
abiT
EQ W
irel
ess
Wireless field tester
Description Cat. No. Ref. No.
The wireless P30GE field tester is an easy to use tool that is vital for installers and system integrators to achieve the best results during the planning and installation phase of a wireless EnOcean based network. The device also plays an important role in starting up and testing the network.
The following functions support the various phases from planning to a fully running installation:
1. Radio link test mode (RLN)In this mode the device helps to assess the reliability of EnOcean communication between two points or EnOcean enabled devices A and B. The device automatically analyzes the bidirectional communication between the two points or devices depending on various wireless parameters and provides a simple summary of the link status.
2. Energy management mode (EM)A dedicated mode allows visualization of the energy measurement telegrams and the energy being registered by the GE switching receivers. This enables installers to check and verify the energy data from the device with reference to a meter to ensure accuracy of the data.
3. Radio network analysis mode (RNA)In this mode the P30GE analyzes all relevant parameters of wireless transmission and the application level by referencing them to the real EnOcean communication. Special evaluation algorithms enable you to obtain a very fast overview of the operational reliability of an installation. Plus, you can identify sporadic effects by long term analysis. The device also helps to reveal wireless interference from other devices sharing the same frequency channel, and enables to check if there is sufficient energy for sensors to work satisfactorily by virtue of their installation.
4. Remote management mode (RMM)In the remote management mode the P30GE enables teach-in operations, as well as the uploading and downloading of configuration tables by wireless EnOcean devices. The P30 recognizes EnOcean devices capable of remote management in its vicinity without user interference ensures the necessary reliability of communication between the P30GE, ensuring the particular device before teach-in starts.
5. Repeater postmaster mode (RPP)Repeaters enhance the reliability of EnOcean communication, provided they are located in the right locations. When the configuration of rooms inside a building is altered, it so often calls for repeaters to be integrated into an EnOcean installation. To determine optimum repeater positioning, a P30GE in RPP mode acts as an EnOcean test repeater at the planned point of installation, and analyzes the entire wireless communication passing through it. The P30 lists the EnOcean IDs affected and shows the result of the optimization that‘s aimed at.
P30GE 679840
680895R/2535/E/EX 0.1 Ed 04/15
* Trademark of General Electric Company © Copyright GE Industrial Solutions 2015
1144
35
ge.com/ex/industrialsolutions
GEIndustrial Solutions
GE Industrial Solutions is a first class global supplier of low and medium voltage products including wiring devices, residential and industrial electrical distribution components, automation products, enclosures and switchboards. Demand for the company’s products comes from wholesalers, installers, panelboard builders, contractors, OEMs and utilities worldwide.
BelgiumGE Industrial BelgiumNieuwevaart 51B-9000 GentTel. +32 (0)9 265 21 11
FinlandGE Industrial SolutionsKuortaneenkatu 2FI-00510 HelsinkiTel. +358 (0)10 394 3760
FranceGE Industrial SolutionsParis Nord 213, rue de la PerdrixF-95958 Roissy CDG CédexTel. +33 (0)800 912 816
GermanyGE Industrial SolutionsRobert-Bosch Str. 3D-50354 Hürth-EfferenTel. +49 (0) 2233/ 9719-0
HungaryGE Hungary Kft .Vaci ut 81-83.H-1139 BudapestTel. +36 1 447 6050
ItalyGE Industrial SolutionsCentro Direzionale ColleoniVia Paracelso 16Palazzo Andromeda B1I-20864 Agrate Brianza (MB)Tel. +39 039 637 371
NetherlandsGE Industrial SolutionsParallelweg 10Nl-7482 CA HaaksbergenTel. +31 (0)53 573 03 03
PolandGE Power ControlsUl. Towarowa 25A, Ip00-869 WarszawaTel. +48 22 520 53 53
Ul. Leszczyńska 643-300 Bielsko-Biała Tel. +48 33 828 62 33
RussiaGE Industrial Solutions27/8, Electrozavodskaya streetMoscow, 107023Tel. +7 495 937 11 11
South AfricaGE Industrial SolutionsUnit 4, 130 Gazelle AvenueCorporate Park Midrand 1685P.O. Box 76672 Wendywood 2144 Tel. +27 11 238 3000
SpainGE POWER CONTROLS IBÉRICA, S.L.Calle Miño 122 Naves E-FPolígono Industrial Santa Margarita08223 Terrassa (Barcelona)Tel. +34 900 993 625
United Arab EmiratesGE Industrial SolutionsInjaz Building, 3rd FloorDubai Internet CityPO Box 11549, DubaiTel. +971 4 4546912
United KingdomGE Industrial Solutions2 The Arena, Downshire WayBracknell, BerkshireRG12 1PUTel. +44 (0)800 587 1239