ge oil & gas ge triveni · 2018-04-27 · proven steam turbine technology and . world class...
TRANSCRIPT
GE TriveniProven steam turbine technology and world class manufacturing capabilities for the global power generation market.
GE Triveni (GET) offers a large portfolio of steam turbine products from 30 MW to 100 MW for the power generation market globally and is committed to bringing significant value to the customer in terms of efficiency, cost and delivery.GET is a 50/50 Joint Venture between GE Oil & Gas and Triveni Turbines. This partnership brings together the best of R&D proficiency offered by GE Oil & Gas in the field of steam turbines and Triveni Turbines world class manufacturing capabilities. GET turbines are manufactured in a state-of-the-art, ISO 9001 and ISO 14001 certified manufacturing facility.The steam turbine design adheres to IEC and applicable international standards. The facility has its own dedicated high speed balancing and mechanical run test facility. These steam turbines are marketed under the GE Triveni brand name.
GE Oil & Gas
Industries ServedUtility Power Generation• Coal Fired• Combined Cycle
Industrial Power Generation• Biomass• Captive Power• Cement• Cogeneration• Food Processing • Mining• Pulp & Paper• Steel• Sugar• Waste to Energy
Key FeaturesGET steam turbines bring advanced impulse and reaction technology for top efficiency over a broad operating conditions.The flexible structured design allows for optimization of steam path to meet the specific steam cycle needs. Features include automatic extraction and injection to meet combined heat and power applications. Load control by means of multiple control valves ensures maximum efficiencies over a wide operating range. GET steam turbines are available in partial or full-arc admission and radial or axial exhaust configurations to meet specific application requirements.High pressure control oil feature enables rapid response to load changes including island operation.
Customer ValueGET steam turbines are characterized by a proven and reliable design, compact layout, competitive construction and low maintenance costs. These turbines are designed specifically for short delivery time and lower life cycle costs. The full factory packaging reduces site installation considerably. The global field service engineering organization provides support for installation, start-up, commissioning, on-site inspections, overhauls, emergency repairs and upgrades.
Structured modules for fast and reliable power
END SEALING• Available with legacy j-strip labyrinth sealing and latest
developed proprietary sealing for reduced leakage and increased efficiency
Product Range
Power Range
Rated Inlet Pressure (up to)
Rated Inlet Temperature (up to)
Rated Speed (up to)
Steam Injection Capability
Bleeds for feed water heating
Design Features
CASING• Turbine casing is horizontally split with blade carriers• High pressure casing made of cast steel• Exhaust casing made of fabricated steel
SHAFT• Shaft is made of a single steel forging• Low-alloy steel is used for low pressure and high-alloy for
high pressure and temperature applications• High speed balanced
BLADES• Standardized high efficiency impulse and reaction
aerofoils for rotor and stator blades• The last stages in condensing turbines are equipped
with the latest developed high efficiency HS blades• Blades materials suitable for high temperature
applications
STOP & CONTROL VALVES• Stop valve with integral stainless steel strainer on
each live steam inlet is integrated in the casing for fast response time
• Stop valve can be checked in operation by the auxiliary “testing device”
• Five or four control valves regulate the steam flow• Partial arc or full admission is available
JOURNAL AND THRUST BEARINGS• Tilting-pad journal bearings• Double-acting tilting-pad thrust bearings are installed
with equalizing device• Combined bearings for axial exhaust configurations
MW
Bar A
Deg C
rpm
Qty
4 series
30
140
540
6,000
Yes
3
6 series
140
540
5,600
Yes
4
8 series
140
540
3,600
Yes
5
MODEL
10 series
100
140
540
3,000
Yes
5
Exhaust Pressure (up to)
Typical dimensions (LXWXH)
Bar A
m
0.3
6x4x3.5
0.3
7x5.5x5
0.3
9.5x7.5x7.5
0.3
9.8x7.5x7.5
GE Triveni Headquarters: 12-A Peenya Industrial Area Phase-1, Bengaluru, IndiaT: +918022164314Global offices: Kuala Lumpur, Florence, Rio de Janeiro, HoustonDownstream Technology Solutions: 4424 West Sam Houston Parkway North - Houston, TX 77041-8200, US
GE, the GE Monogram, and imagination at work are registered trademarks of the General Electric Company.
Designed by: Altab.net©2015 General Electric Company - All Rights Reserved. GE-TRIVENI-092015