Gearbox Replacement Instruction:

   

1. Place the unit in horizontal position, open the lid and remove the Gearbox screws in the order indicated by the numbers. (See picture)

  2. Lift up the gearbox. 3. Beneath it, you will see a red and black twisted cable. 4. Unplug the gearbox at the white plastic connector point. (See picture). 5. Now, get your new gearbox and plug that one into the connector point. 6. Set the gearbox down in the same position as the old one and screw in the screws you previously removed, in the same order. 7. Put in your tray and close the lid and you are ready to Feed and Go! If you have any further question, don’t hesitate to ask by heading to www.feedandgo.com/contact/