gemini - mixer ex-26 - service manual
TRANSCRIPT
www.geminidj.com
SERVICE MANUAL
Features, Operating Instructions………………. Page 2Specifications……………………………………. Page 3Diagrams………………………………………… Page 4Parts List…………………………………………. Page 7Schematics………………………………………. Page 12
EX-26
Congratulations on purchasing the Gemini EX-26 mixer! This state of the art mixer is backed by a three-year warranty, excluding crossfader and channel slides. We know you’re anxious to hook everything up and start mixing beats and cranking up the volume on those hot dance tracks, but we suggest reading this instruction manual first as there are really cool features on this mixer that we wouldn’t want you to miss! The EX-26 Mixer features a crossfader which controls a super-quiet photo coupler to give you smooth operation and the cleanest possible sound, along with a "hamster" switch that is easily accessible on the front of the mixer. This “hamster” switch reverses the direction of the main crossfader. This mixer also features individual “hamster” switches for the separate channel input faders as well. For additional information, refer to the diagrams on pages 1 & 2 for crossfader adjustment and channel slide curve.
• 2 Stereo Channels
• State of the Art Cue Section
• 2 Phono & 2 Line Inputs
• Channel Slide Curve Control
• Crossfader with Curve Control
• Adjustable Input Assign Switches
• Crossfader Reverse (Hamster) Button
• Individual Channel Fader Reverse (Hamster) Buttons
• LED Display
• Gain, High, Mid and Low tone controls for each channel
• Balanced and Unbalanced Master Outputs
• Record outputs
1. All operating instructions should be read before using this equipment. 2. Treat this unit as you would any other piece of electrical equipment and use good common sense! 3. To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician.
INTRODUCTION
FEATURES
4. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 5. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 6. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 7. Do not expose this unit to rain or moisture. 8. Do not use any spray cleaner or lubricant on any controls or switches.
Okay, let’s hook everything up! 1. Make sure that the POWER (1) switch is in the “OFF” position. This unit comes supplied with a 15 volt AC adaptor. Plug the adaptor into the rear panel power jack. Then plug the adaptor into your power strip or outlet. 2. The EX-26 mixer is supplied with 3 sets of output jacks. The BALANCED MASTER OUTPUT (2) jacks are used to connect to your main amplifier using standard cables with 1/4” connectors. We recommend using the balanced amp outputs if the cables to your amp are 25 feet or more. BALANCED MASTER OUTPUTS have three separate conductors, two of which are signal (positive and negative) and one shield (ground). The balanced line uses a tip-ring-sleeve connection. Tip = hot or positive (+), ring = cold or negative (-), and sleeve = shield/ground. The MASTER OUTPUT (3) jacks are unbalanced and are also used to connect to your main amplifier. The REC OUTPUT (4) jacks can be used to connect the mixer to the record input of your recorder enabling you to record your mix.
CAUTIONS
In the U.S.A., if you have any problems with this unit, call 1-732-738-9003 for customer service.
Do not return equipment to your dealer.
CONNECTIONS
Page 2
3. On the rear panel are 2 stereo LINE (5,6) inputs and 2 stereo PHONO (7,8) inputs. The phono inputs will accept only turntables with a magnetic cartridge. GROUND SCREWS (9) for you to ground your turntables are located on the rear panel. The stereo line inputs will accept any line level input such as a CD player, cassette player, etc.
4. Headphones can be plugged into the front panel mounted PHONES (10) jack.
1. POWER ON: Once you have made all the equipment connections to your mixer, press the POWER (1) switch. 2. CHANNEL 1: The GAIN (11), HIGH (12), MID (13), and LOW (14) controls allow you to fully adjust the volume and EQ of the sound source. The Channel 1 REVERSE SWITCH (15) allows you to reverse the direction of the Channel 1 slide fader. (17) The Channel 1 SLIDE FADER (17) controls the input level of this channel. 3. CHANNEL 2: The GAIN (11), HIGH (12), MID (13), and LOW (14) controls allow you to fully adjust the volume and EQ of the sound source. The Channel 2 REVERSE SWITCH (16) allows you to reverse the direction of the Channel 2 slide fader. (18 ) The Channel 2 SLIDE FADER (18 ) controls the input level of this channel. 4. EQ CONTROLS: There is Low, Mid and High equalization for each channel with an extremely wide range of adjustment. 5. INPUT ASSIGN SWITCHES: You can adjust the position of the INPUT ASSIGN SWITCHES (21, 22) to move left to right, up and down, or at a 45 degree angle. Make these adjustments with the power OFF. 1) Remove the channel slide knobs, crossfader knobs and the 4 screws from the sides of the lower faceplate. Then remove the lower faceplate. 2) Remove the 2 screws in the corners of the assign switch plate. Rotate the switch plate to the desired position, and replace the screws and tighten down. 3) To position the switch at a 45-degree angle, you need to reposition the switch on the assign switch plate. First, remove the 2 screws in the corners of the assign switch plate. Then, lift the switch plate up and remove the 2 smaller screws next to the switch. Rotate the switch plate to the right until the 45-degree holes align with the switch holes, replace the screws and tighten down. Replace the switch plate and tighten down. NOTE: Keep track of where you position the input assign switches.
OPERATION
6. CHANNEL SLIDE CURVE SWITCHES: Use the 3 position CHANNEL SLIDE CURVE SWITCHES (23,24) to adjust the kind of curve the channel slides have. Move the selected channel slide curve switch to the 6 (top) position to make the increase in level gradual and even. Move the channel slide curve switch to the 20 (center) position to make the increase in level less gradual as you move channel slide up. Move the channel slide curve switch to the 30 (bottom) position to make the increase in level even less gradual, especially at the top of the slide. 7. CROSSFADER SECTION: The CROSSFADER (25) allows the mixing of one source into another. The left side of the CROSSFADER (25) is CHANNEL 1 and the right side is CHANNEL 2. The CROSSFADER CURVE CONTROL (26) allows you to adjust the kind of curve the crossfader has. Move the CROSSFADER CURVE CONTROL (26) to the right to make the curve steep and cutting (perfect for scratching). Move the CROSSFADER CURVE CONTROL(26) to the left to make the curve gradual and gentle. The CROSSFADER REVERSE BUTTON (27) allows you to reverse the crossfader so that CHANNEL 2 is controlled by the left side of the crossfader and CHANNEL 1 is controlled by the right side of the crossfader. When REVERSE is activated the REVERSE LED (28) will light. NOTE: When the CROSSFADER REVERSE BUTTON is activated (depressed), only the crossfader reverses. The Channel Slides, Gain, and EQ controls do not reverse.
8. OUTPUT CONTROL SECTION: The level of the MASTER OUTPUT (2, 3) is controlled by the MASTER CONTROL (20). The BALANCE CONTROL KNOB (19) controls the balance between the output of the left and right channels. NOTE: The RECORD OUT (4) has no level control. The level is set by the channel slides and the gain controls of the selected channel. The EQ of the channels is set by the low, mid and high controls of that same channel. 9. CUE SECTION: By connecting a set of headphones to the PHONES JACK (10), you can monitor the music coming out of each channel separately or both channels together. Move the CUE FADER (29) to the left to hear CHANNEL 1 and to the right to hear CHANNEL 2. Move the CUE FADER (29) to the center to listen to both channels together. The PHONES MUTE BUTTON (30) will instantly mute your cue mix. 10. DISPLAY: The red LED in the center of the display tells you that the power in your EX-26 Mixer is on. The multi-colored LED DISPLAY (31) on either side of the center tells you the output level of your 2 channels. Okay, that’s it! NOW you’re ready to grab a couple of great CD’s or records, crank it up and get the party started!
INPUTS:
Phono.....................@ 1mHz.................……....2mV 47kΩ
Line.........................................….....……......100mV 20kΩ
OUTPUTS:
Master (balanced..................…………..…0 dB 2 V 800 Ω
Max.......................………………….....40 V Peak to Peak
Master (unbalanced).....................…..........0 dB 1V 400Ω
Max..........................…………………...20V Peak to Peak
Rec.........................……………........…….......150mV 5kΩ
GENERAL:
Low.........................……………................+ 12dB/- 32 dB
Mid..........................……………................+ 12dB/- 32 dB
High..........................………………...........+ 12dB/- 32 dB
Gain............................………………….. …......0 to -20dB
Frequency Response..………........20Hz – 20kHz +/- 2dB
Distortion.............................…………...…less than 0.08%
S/N Ratio................……………….…......better than 80dB
Power Adapter....................……........115V/15V AC 0.5A
230V/15V AC 0.5A
Dimensions.....6.5”W x 14.25”H x 3.00”D
SPECIFICATIONS
Page 3
16
31
21 22
23 24
17 18
28
25
1615
14 14
13 13
12 1219
1111 20
1
22 3
3
4
4
5
5
7
7
99
6
6
8
8
26
27
29
30
10CH 1 CH 2 CH 1CH 2
CUE 1 CUE 2
PART# QUANTITY NAME
1 012-026 1 PANEL CONTROL2 012-027 1 PANEL CONTROL3 024-165 1 PANEL FRONT4 034-118 1 PANEL REAR5 021-601 1 BRACKET VR6 032-104 1 COVER BOTTOM7 022-374 3 HOLDER FADER8 022-376 2 HOLDER SWING9 041-451 1 HEAT SINK1011 023-674 2 KNOB SWING12 002-531 1 KNOB PUSH (SMALL)13 002-532 1 BUSHING FOR KNOB
(SMALL)14 002-580 3 KNOB PUSH15 002-581 3 BUSHING FOR KNOB16 002-728 3 KNOB SLIDE (BIG)17 002-727 1 KNOB SLIDE (SMALL)1819 003-149 12 KNOB ROTARY (A)20 148-313 12 KNOB INLAY (COP
PER)2122 003-745 1 BRIGHTENED
ACRYLIC23 003-436 1 LIGHT PLATE
ACRYLIC24 003-746 15 HOLDER LED25 003-982 2 HOLDER LED 5φ26 003-747 1 HOLDER LED27 049-190 1 CLIP WIRE28 049-206 4 PAD FOOT29 146-716 2 GND SCREW (BIG)3031 159-216 2 SWING DUST PROOF
CLOTH32 159-171 3 VR DUST PROOF
CLOTH33 159-167 1 VR DUST PROOF
CLOTH (SMALL)34
35 196-125 3 SERIAL NO:LABEL36 255-198 1 GIFT BOX37 157-994 1 OWNER’S MANUAL38 156-089 1 WARRANTY CARD39 153-216 1 POLYFORM40 153-226 1 POLYFOAM CUBE4142 095-057 3 VDE LABEL43 099-167 1 A LABEL44 099-169 1 V LABEL45 099-168 1 J LABEL46 099-232 2 LABEL-GREEN47 099-233 2 LABEL-RED48 099-234 2 LABEL-YELLOW49 099-266 1 CAUTION LABEL5051 099-014 1 LABEL - MADE IN
TAIWAN52 099-214 1 LABEL-MADE IN
CHINA5354 190-062 1 SILICON GEL
PARTS LIST
6566 170-350 1 MASTER CARTON6768 099-230 2 100V LABEL74751 262-323 1 PRINTED CIRCUIT
BOARD EX-26-12 262-324 1 PRINTED CIRCUIT
BOARD EX-26-23 262-325 1 PRINTED CIRCUIT
BOARD EX-26-34 262-319 2 PRINTED CIRCUIT
BOARD EX-18-45 262-320 1 PRINTED CIRCUIT
BOARD EX-18-56 262-326 1 PRINTED CIRCUIT
BOARD EX-26-67 262-327 1 PRINTED CIRCUIT
BOARD EX-26-78 262-322 2 PRINTED CIRCUIT
BOARD EX-18-7( PC8)
910 074-109 5 INTEGRATED CIR-
CUIT NJM2068D(C4570C)
11 074-163 7 INTEGRATED CIR-CUIT NJM4558DD(M5218A, BA15218)
12 074-113 1 INTEGRATED CIR-CUIT NJM4556L
13 074-022 4 INTEGRATED CIR-CUIT LB1403N(BA6124)
1415 074-107 1 INTEGRATED CIR-
CUIT NJM7812FA16 074-114 1 INTEGRATED CIR-
CUIT NJM7912FA1718 076-002 2 SILICON TRANSIS-
TORS 2SC94519 076-003 SILICON TRANSIS-
TORS OR 2SC181520 076-096 4 POWER MOSFETS
2SK36321
22 079-501 2 PHOTO COUPLERP873-13
23 079-003 10 SILICON DIODE1N4148
24 079-027 2 RECTIFIER DIODE1N4002
2526 079-012 2 ZENER DIODE
RD12EB2 (MTZ12B)27 079-011 1 ZENER DIODE
RD9.1EB2 (MTZ9.1B)2829 059-139 1 AC ADAPTER AC120V
60Hz/AC15V 500mA30 059-140 1 AC ADAPTER AC230V
50Hz/AC15V 500mA31 059-149 1 AC ADAPTER AC240V
50Hz/AC15V 500mA32 059-151 1 AC ADAPTER AC100V
60Hz/AC15V 500mA3334 083-069 1 PUSH SWITCH
PHONO-ON, OFF35 083-097 1 PUSH SWITCH36 083-119 2 PUSH SWITCH37 083-120 1 POWER SWITCH UL3839 081-049 2 SLIDE SWITCH 4P3C
CH1,CH240 082-019 2 LEVER SW 4P2C
P=18 PH/LN SW41 072-113 3 SLIDE VR
CH1,CH2, FADER42 072-092 1 SLIDE VR 30mm L=15
20KB×243 073-031 4 SEMI-FIXED VR
B10KΩ 67-5-54445 071-166 I 4 ROTARY VR 14φ(F)
L=22.5 50KA×2GAIN, MASTER
46 071-167 I 6 ROTARY VR L=22.550KE×2C.C
47 071-206 I 1 ROTARY VR L=22.520KMN×2C.C BAL-ANCE
48 071-224 1 ROTARY VR L=22.5250KC×2
495051 080-106 5 LED (RED) 3.15φ52 080-103 2 LED (YELLOW) 3.15φ53 080-107 8 LED (GREEN) 3.15φ54 080-111 3 LED (GREEN/RED) 3φ5556 092-141G 2 PHONE JACK 6.3φ57 092-141 1 PHONE JACK 6.3φ58 092-135 1 DC JACK 2.5φ59 161-165 3 4P RCA JACK6061 066-518 18 1/8 W CARBON FILM
RESISTOR S 10Ω62 066-525 2 1/8 W CARBON FILM
RESISTOR S 20Ω63 066-536 2 1/8 W CARBON FILM
RESISTOR S 56Ω6465 066-548 4 1/8 W CARBON FILM
RESISTOR S 180Ω66 066-557 6 1/8 W CARBON FILM
RESISTOR S 430Ω67 066-559 2 1/8 W CARBON FILM
RESISTOR S 510Ω68 066-560 2 1/8 W CARBON FILM
RESISTOR S 560Ω69 066-563 2 1/8 W CARBON FILM
RESISTOR S 750Ω7071 066-571 10 1/8 W CARBON FILM
RESISTOR S 1KΩ72 066-575 8 1/8 W CARBON FILM
RESISTOR S 1.5KΩ73 066-577 8 1/8 W CARBON FILM
RESISTOR S 1.8KΩ74 066-580 4 1/8 W CARBON FILM
RESISTOR S 2.4KΩ75 066-581 4 1/8 W CARBON FILM
RESISTOR S 2.7KΩ76 066-584 18 1/8 W CARBON FILM
RESISTOR S 3.6KΩ77 066-587 4 1/8 W CARBON FILM
RESISTOR S 4.7KΩ78 066-588 4 1/8 W CARBON FILM
RESISTOR S 5.1KΩ79
80 066-589 6 1/8 W CARBON FILMRESISTOR S 5.6KΩ
81 066-591 4 1/8 W CARBON FILMRESISTOR S 6.8KΩ
82 066-593 12 1/8 W CARBON FILMRESISTOR S 8.2KΩ
83 066-594 2 1/8 W CARBON FILMRESISTOR S 9.1KΩ
8485 066-595 20 1/8 W CARBON FILM
RESISTOR S 10KΩ86 066-601 2 1/8 W CARBON FILM
RESISTOR S 18KΩ87 066-604 12 1/8 W CARBON FILM
RESISTOR S 24KΩ88 066-607 16 1/8 W CARBON FILM
RESISTOR S 33KΩ8990 066-611 4 1/8 W CARBON FILM
RESISTOR S 47KΩ91 066-612 4 1/8 W CARBON FILM
RESISTOR S 51KΩ92 066-614 2 1/8 W CARBON FILM
RESISTOR S 62KΩ93 066-617 2 1/8 W CARBON FILM
RESISTOR S 82KΩ9495 066-619 10 1/8 W CARBON FILM
RESISTOR S 100KΩ96 066-621 6 1/8 W CARBON FILM
RESISTOR S 120KΩ97 066-622 2 1/8 W CARBON FILM
RESISTOR S 130KΩ98 066-636 2 1/8 W CARBON FILM
RESISTOR S 510KΩ99 066-651 2 1/8 W CARBON FILM
RESISTOR S 1MΩ100101 051-010 2 CERAMIC CAPACI-
TOR 10P/50V102 051-026 4 CERAMIC CAPACI-
TOR 47P/50V103 051-028 4 CERAMIC CAPACI-
TOR 56P/50V104 051-034 14 CERAMIC CAPACI-
TOR 100P/50V105
106 054-006 2 POLYESTER CAPACI-TOR 0.0027µ/50V
107 054-010 4 POLYESTER CAPACI-TOR 0.0056µ/50V
108 054-011 4 POLYESTER CAPACI-TOR 0.0068µ/50V
109 054-012 4 POLYESTER CAPACI-TOR 0.0082µ/50V
110 054-013 8 POLYESTER CAPACI-TOR 0.01µ/50V
111 054-018 4 POLYESTER CAPACI-TOR 0.027µ/50V
112 054-028 8 POLYESTER CAPACI-TOR 0.15µ/50V
113114 050-125 2 ELECTROLYTIC
CAPACITOR 1µ/50V115 050-029 10 ELECTROLYTIC
CAPACITOR 10µ/16V116 050-036 10 ELECTROLYTIC
CAPACITOR 22µ/25V117 050-038 1 ELECTROLYTIC
CAPACITOR 33µ/16V118 050-043 4 ELECTROLYTIC
CAPACITOR 47µ/16V119 050-049 1 ELECTROLYTIC
CAPACITOR 100µ/16V
120 050-088 2 ELECTROLYTICCAPACITOR 2200µ/25V
121122 050-196 2 ELECTROLYTIC
CAPACITOR MINI4φ×8 0.1µ/50V
123 050-130 4 ELECTROLYTICCAPACITOR MINI4φ×8 4.7µ/50V
124 050-133 10 ELECTROLYTICCAPACITOR MINI4φ×8 10µ/25V
125 050-111 18 ELECTROLYTICCAPACITOR MINI4φ×8 22µ/16V
126 050-148 1 ELECTROLYTICCAPACITOR MINI5φ×7 33µ/16V
127 050-134 2 ELECTROLYTICCAPACITOR MINI6φ×8 47µ/25V
128 050-185 2 ELECTROLYTICCAPACITOR MINI8φ×9 220µ/25V
129130 060-702 5 JUMP WIRE “I” TYPE
0.5φ P=5mm T/52131 060-702 11 JUMP WIRE “I” TYPE
0.5φ P=6mm T/52132 060-702 16 JUMP WIRE “I” TYPE
0.5φ P=7.5mm T/52133 060-702 5 JUMP WIRE “I” TYPE
0.5φ P=10mm T/52134 060-702 8 JUMP WIRE “I” TYPE
0.5φ P=12.5mm T/52135136 092-026 2 3P CONNECTOR
BASE B3B-XH-A 180°137 092-031 2 4P CONNECTOR
BASE B4B-XH-A 180°138 092-039 2 5P CONNECTOR
BASE B5B-XH-A 180°139 092-029 1 7P CONNECTOR
BASE B7B-XH-A 180°140141 092-044 2 2P CONNECTOR
BASE B2B-XH-A 90°142 092-045 1 3P CONNECTOR
BASE B3B-XH-A 90°143 092-051 3 4P CONNECTOR
BASE B4B-XH-A 90°144 092-072 2 6P CONNECTOR
BASE MOLEX 260090°
145 092-107 2 7P(P=2mm) CONNEC-TOR BASE A2001-7P90°
146147 091-267 1 3P CONNECTOR
WITH WIRE XHP-03STRIP×6 150mm
148 091-480 1 3P CONNECTORWITH WIRE XHP-03STRIP×6 120mm
146147 091-267 1 3P CONNECTOR
WITH WIRE XHP-03STRIP×6 150mm
148 091-480 1 3P CONNECTORWITH WIRE XHP-03STRIP×6 120mm
149 091-478 1 3P CONNECTORWITH WIRE XHP-03SCN-03 130mm
150 091-481 1 4P CONNECTORWITH WIRE XHP-04STRIP×6 150mm
151 091-609 1 4P CONNECTORWITH WIRE XHP-04STRIP×6 110mm
152 091-265 1 4P CONNECTORWITH WIRE XHP-04STRIP×6 150mm
153154 091-415 2 4P CONNECTOR
WITH WIRE XHP-04STRIP×6 330mm
155 091-479 2 6P CONNECTORWITH WIRE 2510-6PSTRIP×6 210mm7P
156 091-428 2 7P CONNECTOR
WITH WIRE 160mm
A2001-7P, XH-5P
XH-2P157 091-271 1 7P CONNECTOR
WITH WIRE XHP-07STRIP×6 110mm
158159 093-417 1 GROUND WIRE WITH
RING TONGUE(BLACK) 170mm
157 091-271 1 7P CONNECTORWITH WIRE XHP-07STRIP×6 110mm
158159 093-417 1 GROUND WIRE WITH
RING TONGUE(BLACK) 170mm
33/16
C45
V+V+V-
X34
321
X33
321
D33
CAGAR
X22
X-FA
DER
X21
100K
B
VR24
B
100K
B
VR24
A
PH-OU
T PC
BX2
3
321
H.PHO
NES
J7
SRT
X24
SW9B
SW9A
X19
6
5
4
3
2
1
100K
B
VR22
B
100K
B
VR22
A
X20
6
5
4
3
2
1
100K
B
VR23
B
100K
B
VR23
A
SW2A
SW2B
X9X10
4321
CH2
CH1
50KA
VR3B
50KA
VR3A
10/25
C61
10/25
C60
20KB
VR2B
20KB
VR2A
X11
321
V- V+
47/25
C64
47/25
C63
V-
V+
56R8956R9
6
CUE L
EVEL
10P
C57
10P
C59
4.7/25
C58
4.7/25
C62
220/2
5C55
220/2
5C5
6
10R87
10R88
560
R92120KR9
1
3K6
R90
4556
IC7B
756
560
R94120K
R93
3K6
R95
4556
IC7A
8 4
132
X25
7 6 5 4 3 2 1
SW7D
SW7C
SW7B
SW7A
X26
7 6 5 4 3 2 1
SW8D
SW8C
SW8B
SW8A
X32
5 4 3 2 1
X30
X28
7 6 5 4 3 2 1
X31
5 4 3 2 1
X29
X27
7 6 5 4 3 2 1
X5
V+V-
V-V+
100/1
6C5
0
33/16
C47
POW
ER
J675
0R6
8
750
R69
Z 12V
D5Z 12V
D4
AC15V
-JACK
1/50
C48
1/50
C49
7912
IC5
3Vo
ut
1GND
2Vin
7812
IC4
3Vo
ut
2GND
1Vin
2200
/25C4
4
2200
/25C4
6
1N40
02
D31N40
02
D6
X4
4321
B-B+
V-V+
22/16
C18
22/16C2
3
10R34
10R20
A-A+
V-V+
22/16
C2
22/16C7
10R16
10R6
10K
R35
10K
R33
10/16
C32
10/16
C31
1KR361KR3
2J2
B
101
C29
101
C30
B-B+
47/16
C26
180
R30
10/16
C27
10/16
C22
47/16
C21
180
R24
J2A
1KR271K
R21
822
C24
273
C2547
P
C28
273
C20
47P
C17
822
C19
100KR2
9
47K
R26
8K2
R28
47K
R25
8K2R2
2
100K
R23
2068
IC2A
84
13 2
2068
IC2B
8 4
756
X2
10K
R31
10K
R19
10K
R17
10K
R15
10/16
C16
10/16
C15
1KR181KR1
4J1
B
101
C13
101
C14
A-A+
47/16
C10
180
R12
10/16
C11
10/16
C6
47/16
C5
180
R5
J1A
1KR9
1K
R2
822
C8
273
C9
47P
C12
273
C4
47P
C1
822
C3
100KR1
1
47K
R8
8K2
R10
47K
R7
8K2R3
100K
R4
2068
IC1A
84
13 2
2068
IC1B
8 4
756
X1
10K
R13
10K
R1
RCA4
J3A
RCA4
J3B
2G
2R2L
V+V-
X3
7 6 5 4 3 2 1
5K1
R37 33
0
R43 33
0
R445K
1
R40
10K
R39
10/16
C33
10K
R38 10
/16C3
4
V+
V-30-
30+
22/16
C41
22/16C4
0
10R65
10R64
4558
LD
IC3B
8 4
756
4558
LDIC
3A
8 4
132
J5J4
24K
R61
24K
R58
180
R51
22/25
C39
180
R59
180
R55
22/25
C42
180
R62
101
C38
8K2
R52
8K2
R54
24K
R56
24K
R48
180
R41
22/25
C35
180
R49
180
R47
22/25
C37
180
R57
30-
30+
101
C36
8K2
R45
8K2
R42
V+
V+3K
6
R81
X7X6
SW1D
SW1C
\SW1B
SW1A
V-
4558
LDIC
6B
8 4
756
250K
CVR
1B
103
C52
272
C54
1448
D8C181
5Q7
100K
R70 10
KR8
5
130K
R74
51R86
51K
R76
51K
R77 510
R83
9K1
R80
V-
V-
X8
4558
LDIC
6A
8 4
132
250K
C
VR1A
A3
A2
A1
9.1V
D9
103
C51
272
C53
1448
D7C181
5Q6
100K
R72 10
KR8
4
130K
R73
51R82
51K
R71
51K
R75 510
R79
9K1
R78
1N41
48
D35
1N41
48D3
4
V-
22/16
C96
22/16
C95
V+V+
103
C105
103
C91 1MR1
7910K
R180
1MR149
510K
R172
10K
R181
510K
R145
2SK3
63
Q11
2SK3
63
Q10
10K
R137
10K
R136
2SK3
63Q9
2SK3
63Q8
10K
VR14
10K
VR15
OPTO
CVR
21
OPTO
CVR
20
V-V+
G-G+
10R156
10R170 22
/16C1
03
22/16
C98G+ G- 33
K
R169
101
C102
2068
IC14
B
8 4
756
33K
R158
101
C100
2068
IC14
A
8 4
132
10K
VR11
10K
VR10
X15
OPTO
CVR
9
OPTO
CVR
8
V-
RED
D21
3K6
R157
CH2
0.1/16
C106
+6+3
+0-4
-7-10
-20
100K
R163
2K7
R174
2K7
R175
3K6
R177
3K6
R178
3K6
R167
V-
10R166
3K6
R176
3K6
R168
10/16
C104
10/16
C101
33K
R173
10K
R171
82K
R165
18K
R164
10K
R162
RED
D28
RED
D27
YEL
D26
GRN
D25
GRN
D24
GRN
D23
GRN
D22
LB14
03N
IC16
5
8
7
4
3
6
2
9
1
LB14
03N
IC15
5
8
7
4
3
6
2
9
1
CH1
0.1/16
C90
100K
R160
2K7
R139
2K7
R140
3K6
R142
3K6
R143
3K6
R154
V+
3K6
R141
3K6
R155
10R153
10/16
C92
10/16
C99
33K
R144
10K
R147
82K
R152
18K
R161
10K
R159
RED
D14
RED
D15
YEL
D16
GRN
D17
GRN
D18
GRN
D19
GRN
D20
LB14
03NIC12
5
8
7
4
3
6
2
9
1
LB14
03N
IC13
5
8
7
4
3
6
2
9
1
V-V+
H-H+
10R148
10R129 22
/16C8
7
22/16
C97V+V-
H-H+
101
C89
101
C88
5K6
R135
1KR134
5K6
R138
1KR151
100K
R146
100K
R150
4.7/25
C94
4.7/25
C93
4558
LD
IC11
B
8 4
756
4558
LD
IC11
A
8 4
132
X16
7 6 5 4 3 2 120
KMN
VR13
B L
20KM
N
VR13
A
R
50KA
VR12
B
50KA
VR12
A
V-
1N41
48D3
2
1N41
48D3
11N
4148
D29
62K
R215
CH2E-E+
120K
R212
22/16
C126
1K8
R205
6K8
R210
SW5C
4558
LD
IC19
B
8 4
756
120K
R204
22/16
C127
4558
LD
IC19
A
8 4
132
1K8
R206
6K8
R216
SW5A
X18
5K1
R214
D30
CAG AR
V+
SW6E
SW6FSW
6D
SW6B
SW6C
V-
V+
E-E+
10R217
10R213 22
/16C1
19
22/16
C123
101
C115
4558
LDIC
17B
8 4
756
50KA
VR16
B
24K
R192
1K8
R197
101
C122
E-E+
4558
LDIC
17A
8 4
132
50KA
VR16
A
24K
R189
1K8
R183
22/16
C112
5K6
R209
1K5
R186 33
K
R194
33K
R211
33K
R188
8K2
R198
56P
C124
682
C125
103 C1
18 24K
R207
1K5
R196
2K4
R184
50KE
VR19
B
154
C109
50KE
VR17
B
562
C11720
68IC
18B
8 4
756
50KE
VR18
B
154
C107
3K6
R187
4K7
R208
10/16
C121
E+ E-
5K6
R190
1K5
R203 33
K
R191
33K
R193
33K
R195
8K2
R200
56P
C113
682
C116
103 C1
11
24K
R202
1K5
R182
2K4
R185
50KE
VR19
A
154
C108
50KE
VR17
A
562
C11020
68IC
18A
8 4
132
50KE
VR18
A
154
C114
3K6
R201
4K7
R199
10/16
C120
22/16
C128
X14
4321
X17
X12
V-
1N41
48D1
3
1N41
48D1
11N
4148
D12
62K
R122
D10
CAG AR
D-D+
CH1
120K
R109
22/16
C82
4558
LD
IC10
B
8 4
756
SW3F
SW3E
1K8
R103
6K8
R115
SW4A
4558
LD
IC10
A
8 4
132
V+5K
1
R105
SW3D
120K
R102
22/16
C70
SW3B
SW3C
1K8
R113
6K8
R110
SW4C
22/16
C66
22/16
C84
V-V+
D-D+
10R98
10R104 22
/16C7
8
22/16
C71
5K6
R128
1K5
R133 33
K
R124
33K
R117
33K
R119
8K2
R107
56P
C79
682
C75
103 C7
3 24K
R116
1K5
R112
2K4
R131
50KE
VR6B
154
C76
50KE
VR5B
562
C7420
68IC
8B
8 4
756
50KE
VR7B
154
C77
3K6
R126
4K7
R118
10/16
C86
D+ D-
5K6
R127
1K5
R121 33
K
R108
33K
R125
33K
R120
8K2
R101
56P
C65
682
C68
103 C6
9
24K
R100
1K5
R123
2K4
R130
50KE
VR6A
154
C80
50KE
VR5A
562
C7220
68IC
8A
8 4
132
50KE
VR7A
154
C81
3K6
R132
4K7
R99
10/16
C85
101
C83
4558
LDIC
9B
8 4
756
50KA
VR4B
24K
R114
1K8
R111
101
C67
D-D+
4558
LDIC
9A
8 4
132
50KA
VR4A
24K
R106
1K8
R97
X13
Drawn
By:
C:ed\X
1-4SC
H\EX2
6SCH
.DDB
File:
Sheet
of
4-Dec-
2001
Date:B
Size
Revis
ionNu
mber
Title
ABCD
12
34
D C B A
43
21
Parts of the design of this product may be protected by worldwide patents.
Information in this manual is subject to change without notice and doesnot represent a commitment on the part of the vendor. Gemini SoundProducts Corp. shall not be liable for any loss or damage whatsoeverarising from the use of information or any error contained in this manual.
No part of this manual may be reproduced, stored in a retrieval system ortransmitted, in any form or by any means, electronic, electrical, mechanical,optical, chemical, including photocopying and recording, for any purposewithout the express written permission of Gemini Sound Products Corp.
It is recommended that all maintenance and service on this product isperformed by Gemini Sound Products Corp. or its authorized agents.
Gemini Sound Products Corp. will not accept liability for loss or damagecaused by maintenance or repair performed by unauthorized personnel.
In the USA: If you experience problems with this unit,call 1-732-738-9003 for Gemini Customer Service.
Do not attempt to return this equipment to your dealer.
Worldwide Headquarters • 120 Clover Place, Edison, NJ 08818 • USATel: (732) 738-9003 • Fax: (732) 738-9006
France • G.S.L. France • 11, Avenue Leon Harmel, Z.I. Antony, 92160 Antony, FranceTel: + 33 (0) 1 55 59 04 70 • Fax: + 33 (0) 1 55 59 04 80
Germany • Gemini Sound Products GmbH • Ottostrasse 6, 85757 Karlsfeld, GermanyTel: 08131 - 39171-0 • Fax: 08131 - 39171-9
UK • Gemini Sound Products • Unit C4 Hazleton Industrial Estate, Waterlooville, UK P08 9JUTel: 087 087 00880 • Fax: 087 087 00990
Spain • Gemini Sound Products S.A. • Mino, 112, Nave 1, 08223 Terrassa, Barcelona, SpainTel: 011-34-93-736-34-00 • Fax: 011-34-93-736-34-01
© Gemini Sound Products Corp. 2001 All Rights Reserved