general catalog - regalpts.com...• general information • construction details • calculations...
TRANSCRIPT
Interactive catalog connection
APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application informa-tion included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Regal Beloit America, Inc. and its affi liates with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.
For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal Beloit America Inc. product referred to herein, including any person who buys from a licensed distributor of these branded products.
Regal Power Transmission SolutionsVia Guareschi, 224060 - Telgate (BG) - ItalyCustomer Service: +39 035 83 51 301Fax: +39 035 83 51 306
www.RegalPTS.com www.SystemPlastSmartGuide.com
Regal and System Plast are trademarks of Regal Beloit Corporation or one of its affi liated companies.
©2015-2016 Regal Beloit Corporation, All Rights Reserved. MCB16092E • Form# 9921E • Printed in Italy
GENERAL CATALOG
HOW SMART GUIDE™ CATALOG WORKS
Our interactive catalog is your key to direct access to the System Plast SmartGuideTM website, where you will fi nd all possible information and tools to assist you in selecting, applying our products
The page codes of this catalog opens your access to all relevant information and services
about the product you have selected on www.SystemPlastSmartGuide.com
Clicking on product code directly available:• Download DWG and STP fi les• Possibility to create your bill of material for enquiry or purchase
Related information:• Design guidelines• General information• Construction details• Calculations
Click here forrelated information.
SPECTM
Load and strength calculator
Energy savings calculator
www.SystemPlastSmartGuide.com
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
1 0 1 1 0 c
GENERAL INDEX
BEARINGS
CURVES & TRACKSSIDE GUIDES SOLUTION
ROLLER GUIDE SOLUTIONSMODULAR BELTS & SPROCKETS
MISCELLANEOUSPRODUCTS
CHAINS& SPROCKETS
WEAR STRIPS
LEVELERS
SIDE GUIDE BRACKETS & ACCESSORIES
LEVELERS
CHAINS & BELTS RETURN SYSTEM
FRAME & STRUCTURE SUPPORTS
ROLLER TRANSFERMODULES
Introducing
New chain &
modular belt
material
Click here...
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 6 0 1 0 a
5 4 5 1 0 a
1 1 0 1 0 a
5 0 5 1 0 a
5 5 5 1 0 a
5 3 5 1 0 a
5 5 5 1 0 a
5 0 0 0 5 a5 1 5 1 0 a
5 2 5 1 0 a3 0 0 1 0 a
5 1 0 1 0 a
5 4 0 1 0 a
5 2 6 7 0 a
7 5 6 0 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
1 0 1 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
INDEX METAL CHAINS
STRAIGHT SIDEFLEXING
FOR OTHER TYPES OF CHAIN GO TO:
FLAT TOP FLAT TOP
PLATE TOP
RUBBER TOP RUBBER TOP
GRIPPER
812 - 815 - 812L - 815L 881M -881MO
1874
815VG - 815 VG TAB 881 MO VG
1874 GV
800 - 802 - 805 814 VG 8857 M VG
8157 8157 VG - 8157 TAB VG 881 VG - 881 TAB VG
515 8857 TAB - 8857M805 VG
Index Straight running thermoplastic chains
Index Sidefl exing thermoplastic chains
Index other types of chains
881R TAB - 881O TAB
881O
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
1 1 1 3 0 a 1 1 1 8 0 a 1 1 1 1 0 a
1 1 1 3 0 a 1 1 1 2 0 a 1 1 1 0 0 a
1 1 1 0 0 a 1 1 1 8 0 a 1 1 0 8 0 a 1 1 1 7 0 a
1 1 1 0 0 a 1 1 1 0 0 a 1 1 0 9 0 a
1 1 0 9 0 a
1 1 0 4 0 b
1 1 1 0 0 a
1 1 1 5 0 a
1 1 0 7 0 a 1 1 1 6 0 a
1 1 1 6 0 a1 1 0 6 0 a
1 1 1 2 0 a 1 1 1 5 0 a
1 1 1 2 0 a
1 1 0 4 0 b
1 1 1 5 0 b
1 1 0 2 0 a
1 1 0 4 0 a 1 1 0 9 0 a1 1 0 4 0 a
1 1 0 1 1 a
1 1 0 1 2 a
1 1 0 1 3 a
1 1 1 4 0 a 1 1 4 5 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
1 1 0 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
INDEX STRAIGHT RUNNING THERMOPLASTIC CHAINS
STRAIGHT
Index Metal chains
FOR OTHER TYPES OF CHAIN GO TO:
Index Sidefl exing thermoplastic chains
Index other types of chains
FLAT TOP RUBBER TOPPLATE TOP LBP
820 - 820P - 831 831 VG843 - 845
863
LBP 831
828 8257 VG
821 VG
LBP 8257
LBP 8218257
821
SK 38
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
1 1 3 7 0 a
1 1 3 4 0 a
1 1 3 0 0 a
1 1 2 0 0 a
1 1 3 7 0 a
1 1 3 2 0 a
1 1 1 9 0 a
1 1 2 1 0 a
1 1 3 8 0 a1 1 4 6 0 a
1 1 2 0 0 a
1 1 2 6 0 a
1 1 2 0 0 a
1 1 3 1 0 a
1 1 3 2 0 a
1 1 4 1 0 a
1 1 4 1 0 a
1 1 3 0 0 a
1 1 3 2 0 a
1 1 3 2 0 a
1 1 3 0 0 a
1 1 3 3 0 a
1 1 3 3 0 a
1 1 0 1 0 a
1 1 0 1 2 a
1 1 0 1 3 a
1 1 4 6 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
1 1 0 1 1 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
INDEX SIDEFLEXING THERMOPLASTIC CHAINS
FLAT TOP RUBBER TOPPLATE TOP GRIPPER
879M - 880M
878 TAB VG - 879 TAB VG
1843 TAB 878 TAB GS
877TAB - 878TAB879TAB - 880TAB
882 M VG - 882 TAB VG
1873 TAB VG
1863 TAB
1873 TAB GS
879 - 880
8800P
882M
882 BEVEL - 882 TAB
SIDEFLEXING
LBP
LBP 878 TAB
LBP 882 M - LBP 882 TAB
LBP 879 M
FOR OTHER TYPES OF CHAIN GO TO:
Index Metal chains
Index other types of chains
Index Straight running thermoplastic chains
879 M VG
1873 TAB
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
1 1 3 6 0 a
1 1 3 5 0 a
1 1 2 2 0 a
1 1 2 4 0 a
1 1 2 8 0 a
1 1 4 2 0 a
1 1 2 3 0 a
1 1 4 0 0 a
1 1 4 4 0 a1 1 3 9 0 a
1 1 4 3 0 a1 1 4 7 0 a
1 1 2 6 0 a
1 1 2 6 0 a
1 1 3 0 0 a
1 1 3 0 0 a1 1 0 1 0 a
1 1 0 1 1 a
1 1 0 1 3 a
1 1 3 0 0 a
1 1 2 6 0 a1 1 2 6 0 a
1 1 2 6 0 a
1 1 3 0 0 a
1 1 2 6 0 a
1 1 2 6 0 a
1 1 2 4 0 b
1 1 3 5 0 a
1 1 2 9 0 a
1 1 4 9 0 a
1 1 2 6 0 a
1 1 3 8 0 a
1 1 2 6 0 b
1 1 4 7 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
1 1 0 1 2 awww.SystemPlastSmartGuide.com
OTHER TYPES OF CHAIN
MULTIFLEX CRATE CONVEYOR
1700 - 1702 - 1701 TAB CC 600 - CC 600 TAB
1706
1710 - 1710C TAB
CC 600 P - CC 600 TAB P
CC 600 FCC 631 TAB
CC 1400 - CC 1400 TAB
CC 1431 TAB
CC 1400VCC 1400V TAB
SIDEFLEXING
FOR OTHER TYPES OF CHAIN GO TO:
Index Straight running thermoplastic chains
Index Sidefl exing thermoplastic chains
IndexMetal chains
SAFE
TY C
HA
IN
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
1 1 5 3 0 a
1 1 5 3 0 a
1 1 5 4 0 a 1 1 5 8 0 a 1 1 6 0 0 a
1 1 5 7 0 a 1 1 5 9 0 a
1 1 5 7 0 a 1 1 5 9 0 a
1 1 5 5 0 a
1 1 5 5 0 a
1 1 5 5 0 a 1 1 5 8 0 a 1 1 6 0 0 a
1 1 5 8 0 a 1 1 5 9 0 a
1 1 5 8 0 a 1 1 5 9 0 a
1 1 0 1 0 a
1 1 0 1 1 a
1 1 0 1 2 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
1 1 0 1 3 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
PITCH
H
12,7 (½")
25,4 (1")
PITCHmm
Hmm
VERSIONMODULE
BELTSERIES FLAT TOP FLUSH GRID RUBBER INSERTS LBP SPECIAL
12,7(½”) 8,7
Metric85
Metric100
- - - -
Imperial- - - -
Metric- - - -
Metric- - -
19,05 (¾”) 8,7
Imperial- - -
25,4(1”) 8,7
Metric -
Imperial- - -
25,4(1”) 12,7
Metric-
Imperial-
2120
2122
2121
2123
2124
2190
2250
2253
2251
2252
Flights
Roller top
Guide bar
Index modular belt straight running pitch 50,8 mm (2" ) to 63,5 mm (2 ½" )
Index modular belt sidefl exing
FOR OTHER TYPES OF BELT GO TO:
INDEX MODULAR BELTS STRAIGHT RUNNINGFROM 12,7 mm (½”) TO 25,4 mm (1") PITCH
Indication for molded to width versions
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
3 0 1 2 0 a3 0 1 6 0 a 3 0 1 1 0 a3 0 1 0 0 a3 0 0 7 0 a3 0 0 5 0 a
3 0 1 6 6 a 3 0 0 7 3 a
3 0 1 6 0 a3 0 0 5 5 a3 0 0 3 0 a
3 0 3 9 5 a
3 0 3 9 5 a
3 0 3 9 5 d
3 0 5 5 0 a
3 0 5 5 0 a 3 0 4 8 1 a
3 0 3 3 0 a
3 0 4 4 5 a
3 0 3 2 5 a 3 0 3 6 0 a 3 0 3 7 0 a
3 0 4 9 0 a 3 0 5 0 0 a
3 0 3 9 7 a
3 0 3 6 5 a
3 0 4 4 0 a
3 0 4 2 0 a
3 0 3 1 0 a 3 0 3 4 0 a
3 0 4 2 0 a
3 0 0 6 5 a
3 0 2 1 0 a 3 0 2 3 0 a
3 0 1 6 5 a
3 0 2 3 5 a 3 0 2 0 0 a 3 0 2 2 0 a
3 0 0 9 0 a
3 0 0 6 5 a
3 0 0 3 0 a
3 0 0 1 1 a
3 0 0 1 2 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
3 0 0 1 0 awww.SystemPlastSmartGuide.com
FROM 50,8 mm (2") TO 63,5 mm (2 ½")INDEX MODULAR BELTS STRAIGHT RUNNING
H
PITCH
PITCHmm
Hmm
VERSIONMODULE
BELTSERIES FLAT TOP FLUSH GRID RUBBER INSERTS LBP SPECIAL
50,8(2”) 16
Imperial
50,8 (2”) 22Metric
63,5(2.½”) 30
Metric
2500
2508
2630
Raised rib
Index modular belt straight runningpitch 12,7 mm (½") to 25,4 mm (1")
Index modular belt sidefl exing
FOR OTHER TYPES OF BELT GO TO:50,8 (2")
63,5 (2 ½")
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
3 0 6 4 0 a
3 0 6 5 0 a
3 0 6 1 5 a
3 0 6 2 0 a
3 0 6 4 5 a
3 0 6 1 0 a
3 0 0 1 0 a
3 0 0 1 2 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
3 0 0 1 1 awww.SystemPlastSmartGuide.com
INDEX SIDEFLEXING MODULAR BELT
H
Index modular belt straight runningpitch 12,7 mm (½") to 25,4 mm (1")
Index modular belt straight runningpitch 50,8 mm (2") to 63,5 mm (2 ½")
FOR OTHER TYPES OF BELT GO TO:PITCH
PITCHmm
Hmm
VERSIONMODULE
BELTSERIES FLAT TOP FLUSH GRID RUBBER INSERTS LBP SPECIAL
12,7(½”) 8,7 Metric
25,4(1”) 8,7
Magnetic chainbelt
TABchainbelt
Magneticchainbelt
25,4(1”) 12,7
Magneticchainbelt
TABchainbelt
25,4(1”) 12,7
Imperial
31,75(1¼”) 12,7
Metric
2120
2250
2250 TAB
2260
2251
2251 TAB
2256
2351245125512651
3 0 7 3 0 a
3 0 7 4 5 a
3 0 7 3 5 a
3 0 7 5 5 a
3 0 1 6 0 a
3 0 7 1 5 a
3 0 7 1 5 a
3 0 7 1 5 a
3 0 7 1 5 a
3 0 7 1 5 a
3 0 7 4 0 a
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
3 0 0 1 0 a
3 0 0 1 1 a
3 0 7 6 0 a
3 0 7 0 0 a
3 0 7 0 0 a
3 0 7 2 0 a
3 0 7 0 0 a
3 0 7 1 0 a
3 0 7 1 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
3 0 0 1 2 awww.SystemPlastSmartGuide.com
Indication for molded to width versions
DUAL MAGNETIC CURVE TRACKSINTRODUCTION TO CURVES
Magnetic system with metal strip: “EXTRA” curves
System Plast has developed a magnetic curve retention system for dry-running applications.
The system, sets new performance standards in magnet curve technology due to the inclusion of
a unique metal strip mounted in the inside bearing face of the top section. This area is constantly under
load due to the pressure/speed factor.
Main advantages:• Extreme dissipation of heat signifi cantly reduces wear.• Under test conditions, lowest noise decibel levels were recorded.• “Extra” curves are strongly recommended with plastic chains only!
BEVEL TAB MAGNETIC
Secure chain retention: + +++ ++
Support in return part: - + +
Chain can be lifted for cleaning: + - +++
Jamming due to foreign particles: + - ++
COMPARISON OF CURVE SYSTEMS:
BEVEL:
TAB:
MAGNETIC:
UHMWPE
Solidlubricant
Nolu®-S material is a unique compound of UHMWPE and a solid lubricant.It drastically reduces the coeffi cient of friction, maintaining the characteristics of UHMWPE.Nolu-S has a better thermal conductivity compared with UHMWPE.
Benefi ts and features• Nolu-S makes very high speeds possible, especially when running dry.• Nolu-S has an extremely low coeffi cient of friction.• Nolu-S reduces noise and squeaking.• Nolu-S reduces chain pull.• Nolu-S extends the life of the chain.• Nolu-S does not damage and scratch the surface of PET.• Nolu-S reduces the consumption of energy.• Nolu-S is a UHMWPE with a solid lubricant.
HDPE 500
UMHW
-PE1000
UMHW
-PE1200
Nylatro
n GSM
/NSM
Nolu-S
SPECIAL CURVES FOR DRY RUNNING APPLICATIONS
Design and functionality: Dual Magnetic System curves have the magnets positioned on the outside of the centre line radius of each track which results in a more effective magnetic fi eld through the curve.
R
Magnet
SYSTEMPLAST OFFERS A COMPLETE RANGE OF CURVES AND STRAIGHT TRACKS, DESIGNED FOR ALL POSSIBLE CONVEYOR APPLICATIONS. BELOW A BRIEF OVERVIEW OF THE VARIOUS CHARACTERISTICS.
Coeffi cient of frictioncomparison of materials
INDEX CURVES GO TO:
Index curve and straight track for tab
Index magnetic curves
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 0 0 1 0 a5 0 0 1 0 b
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 0 0 0 5 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
CHAIN TYPES: 879M-880M-881M / WIDTH:K325-K330 NOMINALWIDTH mm PAGE
100
111
OTHER VERSIONS:
CHAIN TYPES: 880M-881M / WIDTH: K450-K750 PAGE
CHAIN TYPES: 882M-8857M / WIDTH: K750-K1000-K1200 PAGE
CHAIN TYPES LBP: 879M-K325 & LBP 882M / WIDTH: K750-K1000-K1200 PAGE
CHAINBELT: 2120M / WIDTH: K330 PAGE
CHAINBELTS: 2250M-2260M/ WIDTH: K330 PAGE
CHAINBELTS: 2251M / WIDTH: K330-K450 PAGE
K325-K33082,5-83,8
85
8,7mm
12,7mm
82,5-83,8
100-110
85-89-90
K450-K750114,3-140,5
INDEX MAGNETIC CURVES
CURVE TYPE PAGE
SYSTEM PLAST
REFERENCEK1 KMD01K2 KMD02K3 KMD04K4 KMD05
K5A KMD07K5B KMD06K5C KMD09K5D KMD10K6 KMD03.BK7 KMD03.AK8 KMD08K9 KMD62K10 KMD61
K21A KMD21K22A KMD22K27 KMD23K42 KMD11K43 KMD12K61 KMD31K62 KMD37K65 KMD33K66 KMD32K80 KMD39K81 KMD40K85 KMD42K86 KMD41K93 KMD48K97 KMD52KA4 KMD26KA6 KMD25KA7 KMD24KA8 KMD27
KA42 KMD28KB4 KMD92
KB5D KMD96KB6 KMD91KB7 KMD90KB8 KMD93KC4 KMD86
KC5D KMD97KC6 KMD85KC7 KMD84KC8 KMD87
KC22 KMD64KC27 KMD66
LBP68C KMD68LBP86C KMD71LBP93C KMD78LBP97C KMD82
MAGNETIC CURVESCROSS REFERENCE
FOR OTHER TYPES OF CURVES AND STRAIGHT TRACK GO TO:
Index curve and straight track for tab
Introduction to curves. Go to:
Nominal Width
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 0 0 1 0 b
5 0 1 0 1 a
5 0 0 9 1 a
5 0 0 8 0 a
5 0 0 6 0 a
5 0 0 5 0 a
5 0 0 6 0 a
5 0 0 8 0 a
5 0 1 0 1 a
5 0 0 9 1 a
5 0 0 4 0 a
5 0 0 4 0 a
5 0 0 5 0 a
5 0 0 2 0 a
1 1 0 6 0 a1 1 1 6 0 a1 1 2 2 0 a1 1 3 8 0 a
1 1 0 6 0 a1 1 1 6 0 a1 1 2 2 0 a1 1 3 8 0 a
1 1 0 6 0 a
1 1 2 8 0 a
1 1 2 8 0 a1 1 3 5 0 a
1 1 1 6 0 a1 1 2 2 0 a
5 0 0 4 0 a
5 0 0 5 0 a
5 0 0 2 0 a
5 0 0 0 5 a
5 0 0 7 0 a
5 0 0 3 0 a5 0 0 3 0 a
5 0 0 3 0 a
5 0 0 7 0 a
3 0 7 2 0 a
3 0 7 0 0 a
3 0 7 0 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 0 0 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
CURVE AND STRAIGHT TRACKS FOR TAB CHAINSCHAIN TYPES: 878-879-880-881O / WIDTH: TAB K325-330-450-750 PAGE
COMPACT CURVES AND STRAIGHT TRACKS FOR TAB & BEVEL CHAINSCHAIN TYPES: 878-879-880-881O / WIDTH: TAB K325-330-450 PAGE
CURVES AND STRAIGHT TRACKS FOR BEVEL CHAINSCHAIN TYPES: 879-880-881-881O / WIDTH: K325-350-450-750 PAGE
CURVES AND STRAIGHT TRACKS FOR TAB CHAINS CHAIN TYPES: 882 TAB / WIDTH: K450-750-1000-1200 PAGE
CURVES AND STRAIGHT TRACKS FOR BEVEL CHAINS CHAIN TYPES: 882 / WIDTH: K450-750-1200 PAGE
CURVES AND STRAIGHT TRACKS FOR TAB CHAINS CHAIN TYPES: 1863-1873-1874 PAGE
CURVES FOR MULTIFLEX TAB CHAINS PAGE
CURVES FOR MULTIFLEX CHAINS WITH TOP PLATES PAGE
INDEX CURVE AND STRAIGHT TRACK FOR TAB & BEVEL
TAB BEVEL
FOR OTHER TYPES OF CURVES GO TO:
Index magnetic curves
Introduction to curves. Go to:
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 0 0 1 0 a
5 0 0 0 5 a5 0 1 8 0 a
5 0 1 6 0 a
5 0 1 5 0 a
5 0 1 2 0 a
5 0 1 1 0 a
5 0 1 3 0 a
5 0 1 4 0 a
5 0 1 7 0 a
5 0 1 7 0 a
1 1 0 7 0 a1 1 2 3 0 a
1 1 0 8 0 a
1 1 2 4 0 a
1 1 1 4 0 a
1 1 0 8 0 a
1 1 4 7 0 a
1 1 2 9 0 a
1 1 2 9 0 a
1 1 5 3 0 a
1 1 5 4 0 a
1 1 5 4 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 0 0 1 0 bwww.SystemPlastSmartGuide.com
INDEX WEAR STRIPS
WEAR STRIPS
CHAIN AND BELT SUPPORT SYSTEM
DRIVE RIVET FOR WEAR STRIPS GUIDES FOR SIDEFLEXING BELT
CHAIN AND BELT SUPPORT BAR CAPS
STANDARD MATERIAL: UHMWPEThis ultra high molecular weight material is the choice for a wide variety of applications. The low friction characteristics of UHMW allow chains and containers to move at high speed with minimum drag and noise as well as minimun container damage.
BENEFITS:• Low friction• High wear resistance• High temperature resistance
BENEFITS:• Extends the life of mating surfaces• Lowers mating surface scratching or damage
NOLU®-SNolu-S is a blend of UHMW and other dry lubricants that maintain good wear characteristics while signifi cantly reducing coeffi cients of friction. Its unique self lubricating properties make it ideal for applications requiring reduced friction, noise reduction and higher dry-running speeds.
• Reduces energy consumption• Minimizes product pulsation on conveyors• Low noise operation
UHMWPE
Solid lubricant
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 0 5 2 0 a 5 0 5 3 0 a 5 0 5 5 0 a 5 0 5 6 0 a
5 0 6 0 0 a 5 0 6 0 0 a5 0 5 8 0 a
5 0 5 5 0 b
5 0 5 7 0 a
5 0 5 7 0 a
5 0 6 5 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 0 5 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
Chain return rollers85 mm center distance
Chain return rollersOther center distances
Watertight return rollers27mm versions
Watertight return rollers40/43mm versions
Watertight return rollers82/85mm versions
Flanges for Return Rollers
Wear strip & Clamps for serpentine system
Little striker & Strikerfor serpentine system
Sliding shoe & expansion plug
for serpentine system
Single spacer & Shoe wear strip
for serpentine system
Washer & Sliding shoe for serpentine system
Wearshoesfor return system
INDEX CHAIN & BELT ROLLERS SYSTEMS
BLACK COLOR
GREEN COLOR
STANDARD
SOLID VERSION
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 1 0 3 0 a
5 1 0 4 0 a
5 1 0 5 0 a
5 1 0 9 0 a
5 1 1 2 0 a
5 1 1 3 0 a
5 1 1 4 0 a
5 1 1 5 0 a
5 1 1 7 0 a
5 1 0 2 0 a5 1 0 6 0 a
5 1 0 8 0 a5 1 1 1 0 a
5 1 1 6 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Relate d information
5 1 0 1 0 awww.SystemPlastSmartGuide.com
INDEX SIDE GUIDES & CLAMPS
SHAPE SIDE GUIDE TYPE OF CLAMPS
Single clamps
Double clamps
Stainless steel clamps
Other clamps
Single clamps
Double clamps
GUIDE FOR PET BOTTLES
PRODUCT GUIDES
Other clampsOther clampsOther clampsOther clampsOther clamps
ADJUSTING RODS ADJUSTING IN CURVES THERMOPLASTIC ADJUSTING ALUMINIUM GUIDE RAIL
D-SHAPE HOLLOW EXTRUDED PROFILES
ADJUSTING IN CURVES
ACCESSORIES FOR GUIDE ADJUSTMENT IN CURVES:
Side guide
For index side guides with rollers.
Go to:
78
87 90
78
87 90
78
87 90
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 1 5 2 0 a 5 2 5 1 0 a
5 1 6 0 0 a
5 1 5 2 0 a
5 1 6 1 0 a
5 1 6 2 0 a
5 1 6 3 0 a
5 1 6 4 0 a
5 1 6 5 0 a
5 1 6 8 0 a 5 1 6 9 0 a 5 1 7 0 0 a5 1 6 6 0 a
5 1 8 3 0 a 5 1 8 1 0 a 5 1 8 2 0 a 5 1 7 4 0 a
5 1 7 2 0 a
5 1 7 3 0 a
5 1 7 3 0 a
5 1 7 1 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 1 5 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
INDEX ROLLER SIDE GUIDES & ROLLER TRANSFER PLATES
AluminiumAluminium
PVC PVC
85 & 115 mm 6” & 9”
ACCESSORIES
Can only be used straight
Loose modules
Loose Modules
Loose modules
Loose rollers
Loose profi les
Forfl at bar
40X8
Forfl at bar
40X10
APPLICATION STRAIGHT & CURVES
LATERAL CENTRAL
ROLLER TRANSFER PLATES
For index side guides, go to:
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 2 5 2 0 a
5 2 6 1 0 a 5 2 6 1 0 a5 2 6 1 3 a
5 2 6 1 2 a
5 2 5 9 2 a
5 2 6 1 1 a
5 2 5 2 1 a
5 2 5 7 0 a 5 2 5 7 1 a 5 2 5 7 2 a
5 2 6 7 0 a 5 2 6 7 1 a
5 2 5 9 0 a
5 2 5 3 0 a 5 2 5 5 0 a
5 2 6 5 0 a
5 2 6 1 4 a5 2 6 8 0 a
5 1 5 1 0 a
5 2 5 9 4 a
5 2 5 9 4 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 2 5 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
ECCENTRIC LEVELER
SIDE GUIDE BRACKETSSTAINLESS STEEL
MOUNTING TOP
CROSS BLOCKS T CLAMPS QUICK RELEASE CLAMP FORPHOTOCELLS CROSS BLOCK
LATERAL BRACKETSSTAINLESS STEEL
ANGLE BRACKETSTHERMOPLASTIC
ANGLE BRACKETSSTAINLESS STEEL
SPEEDSET™ GUIDE RAIL ADJUSTMENT
DRIP TRAY BRACKETS
PHOTOCELL CLAMP ASSEMBLY
INDEX SIDE GUIDE BRACKETS
SIDE GUIDE BRACKETS - FIXED TOP
AB PAGE CODE
TYPE 1 TYPE 2
35 - 31
- 61 38,5
65 - 30
66 - 30,5
- 78,5 30
- 89 38,5
SIDE GUIDE BRACKETS - SWIVEL TOP
AB PAGE CODE
TYPE 1 TYPE 2
69 - 31
77 70 43
- 69 44
A A
Type 1 Type 2
B B
A
Type 1 Type 2
BA
B
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 3 5 5 5 a
5 3 5 2 5 a
5 3 5 3 5 a
5 3 5 4 5 a
5 3 5 6 0 a
5 3 5 5 5 a
5 3 5 1 5 a
5 3 5 5 5 a
5 3 5 6 0 a
5 3 5 5 5 a
5 3 5 6 5 a
5 3 5 8 5 a
5 3 5 7 0 a 5 3 5 7 5 a 5 3 5 8 0 a 5 3 5 9 5 a 5 3 6 0 0 a 5 3 6 0 5 a
5 3 6 1 0 a 5 3 6 2 5 a 5 3 6 3 0 a 5 3 6 3 5 a 5 3 6 4 5 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 3 5 1 0 awww.SystemPlastSmartGuide.com
STAINLESS STEEL
FRAME & STRUCTURE SUPPORTS INDEX
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 4 0 6 0 a
5 4 0 2 0 a
5 4 0 5 0 a
5 4 0 3 0 a5 4 0 4 0 a
5 4 0 7 0 a
5 4 0 8 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 4 0 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
MISCELLANEOUS PRODUCTSMACHINE GUARDING
MOUNTINGPROFILES
TUBE JOINTS
PANEL CLAMPS
HINGES
HANDLES
DOOR LOCKS
DOOR STOP
END PLUGSRATCHEDHANDLES
SHAFT COLLARKNOBS
MISCELLANEOUS COMPONENTS
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 4 5 2 0 a
5 4 5 3 0 a
5 4 5 4 0 a
5 4 5 5 0 a
5 4 5 6 0 a
5 4 5 7 0 a
5 4 5 2 0 a
5 4 5 3 0 a 5 4 6 2 0 a
5 4 6 3 0 a5 4 6 0 0 a5 4 6 1 0 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 4 5 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
Ø D Articulated foot
Fixedfoot Sanistar Metal
foot
30 - - -
40 - - -
50 -
60 - - -
75 - 80 -
100
125
INDEX LEVELERS & TUBE ENDS
BasesØ 80-100-150-200
Welded endplates
Threadedtube ends
Single Lag hole pad
General tolerance on total height L ± 2 mm
-
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 5 5 2 5 a5 5 5 4 0 a
5 5 5 5 5 a
5 5 5 7 0 a
5 5 6 1 5 a5 5 6 0 0 a5 5 5 8 5 a
5 5 6 1 5 a
5 5 6 4 5 a5 5 6 6 0 a
5 5 7 5 0 a 5 5 6 7 5 a
5 5 6 7 5 a 5 5 7 2 0 a
5 5 6 3 0 a
5 5 7 3 5 a
5 5 7 6 5 c
5 5 7 6 5 a
5 5 6 7 5 a5 5 7 2 0 a5 5 7 0 5 a
5 5 6 9 0 a 5 5 7 0 5 a
5 5 6 9 0 a5 5 7 3 5 a
5 5 7 5 0 a5 5 7 5 0 a
5 5 7 8 0 a
5 5 7 9 5 a5 5 8 4 0 a
5 5 8 1 0 a5 5 8 2 5 a
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 5 5 1 0 awww.SystemPlastSmartGuide.com
Information about this product is only available on our Smart GuideTM website.
TYPE SHAFTDIAMETER
GRUBSCREWS
ECCENTRICRING
UFL / UCFHØ 12 - Ø 19
Ø 20 - Ø 40
UCF / UCFQØ 12 - Ø 19
Ø 20 - Ø 40
UCFG Ø 25 - Ø 35
CL Ø 30 - Ø 40
CS Ø 30 - Ø 40
UCP Ø 20 - Ø 40
UCPA Ø 20 - Ø 30
SQL Ø 12 - Ø 20
UCFB Ø 20 - Ø 30
UCHE Ø 20 - Ø 35
UCT Ø 20 - Ø 35
UCTT Ø 20 - Ø 35
INDEX MOUNTED BEARINGS
LOOSE SAFETY CAPSBALL BEARINGS
GREASE NIPPLES
1 1 0 1 0 a 5 3 5 1 0 a5 0 5 1 0 a 5 5 5 1 0 a3 0 0 1 0 a 5 4 0 1 0 a5 1 0 1 0 a 5 6 0 1 0 a5 0 0 0 5 a 5 4 5 1 0 a5 1 5 1 0 a 7 0 0 5 0 a
5 6 0 6 0 a
5 6 0 8 0 a
5 6 1 2 0 a
5 6 1 5 0 a
5 6 1 6 0 a
5 6 1 7 0 a
5 6 0 8 0 a
5 6 1 2 0 a
5 6 1 5 0 a
5 6 1 6 0 a
5 6 1 7 0 a
5 6 0 3 0 a
5 6 3 0 0 a
5 6 3 0 0 a
5 6 0 2 0 a
5 6 0 5 0 a
5 6 0 9 0 a
5 6 1 0 0 a
5 6 1 1 0 a
5 6 1 3 0 a
5 6 1 4 0 a
5 6 0 4 0 a
5 6 0 7 0 a
5 6 0 9 0 a
5 6 1 0 0 a
5 6 1 1 0 a
5 6 1 3 0 a
5 6 1 4 0 a
5 6 3 0 0 b
Chains & sprockets Wear strips Side guide brackets &accessories Levelers
Modular belts & sprockets Chain & beltreturn systems
Frame & structure supports Bearing supports
Curves & tracks Side guide solutions Miscellaneousproducts Related information
5 6 0 1 0 awww.SystemPlastSmartGuide.com
Interactive catalog connection
APPLICATION CONSIDERATIONS
The proper selection and application of power transmission products and components, including the related area of product safety, is the responsibility of the customer. Operating and performance requirements and potential associated issues will vary appreciably depending upon the use and application of such products and components. The scope of the technical and application informa-tion included in this publication is necessarily limited. Unusual operating environments and conditions, lubrication requirements, loading supports, and other factors can materially affect the application and operating results of the products and components and the customer should carefully review its requirements. Any technical advice or review furnished by Regal Beloit America, Inc. and its affi liates with respect to the use of products and components is given in good faith and without charge, and Regal assumes no obligation or liability for the advice given, or results obtained, all such advice and review being given and accepted at customer’s risk.
For a copy of our Standard Terms and Conditions of Sale, Disclaimers of Warranty, Limitation of Liability and Remedy, please contact Customer Service at 1-800-626-2120. These terms and conditions of sale, disclaimers and limitations of liability apply to any person who may buy, acquire or use a Regal Beloit America Inc. product referred to herein, including any person who buys from a licensed distributor of these branded products.
Regal Power Transmission SolutionsVia Guareschi, 224060 - Telgate (BG) - ItalyCustomer Service: +39 035 83 51 301Fax: +39 035 83 51 306
www.RegalPTS.com www.SystemPlastSmartGuide.com
Regal and System Plast are trademarks of Regal Beloit Corporation or one of its affi liated companies.
©2015-2016 Regal Beloit Corporation, All Rights Reserved. MCB16092E • Form# 9921E • Printed in Italy
GENERAL CATALOG