general information and terms of sale - caridtamco inc., guarantees to repair or replace (at...

http://www.carid.com/tamco/

2345

General Information and Terms of Sale Air Tools - Paving Breakers Air Tools - Clay Diggers and Trenchers Air Tools - Rock Drills Air Tools - Rivet Busters and Tampers 6Air Tools - Chipping Hammers 7Air Tools - American Made 8Air Tools - Weld Flux and Needle Scalers 9 Air Tools - Rammers 10Air Tools - Scabbler and Scabbler Accessories / Inline Oilers 11Air Tool Accessories 12-13Air Tool Accessories / Nail Stakes 14 Weld Flux Scaler Steel 15 Electric Demo Hammer Steel 16Boom Mounted Demo Tools 17Paving Breaker Steel 18-19Paving Breaker Accessories 20-21Chipping Hammer Steel 22-23Rivet Buster Steel 24Detachable Bit Hollow Drill Steel 25Threaded Rock Bits 26Carbide Tipped Hollow Drills 27-28Seize-Free Carbide Hollow Drills 29Hard Tip Drill Care and Safety Recommendations 29 Hand Tools 30-31Maintenance Bars 32Handled Tools 33-34Replacement Handles 34Steel Cross References 35-40

Table of Contents

https://www.carid.com/air-tools.html

Terms of SaleThis price manual supercedes all other catalogs and/or price lists. All prices are subject to change without notice.

Shipping TermsFOB: Shipping Point (unless noted otherwise at time of sale)Minimum Invoice: $50.00 Net, this excludes freight and tax where applicableReturned Goods: Tamco will not accept returns without prior authorization. All returns are subject to a 25% restocking fee. No credit will be issued without proper documentation. All material must be returned in new condition.

Shortages and/or DamagesNever accept any shortaged or damaged shipments without making a notation on the bill of lading.Tamco Inc., must be notifi ed promptly of any shortages/damages or claims will not be considered.Tamco Inc., cannot be held responsible for delivery delays due to strikes, fi res, or other conditions outside of our control. Our responsibility ceases when goods are received by freight carriers in new condition.All published weights are approximate. Actual shipping weights may vary.

Credit Policy1. Tamco’s credit terms are 1% -10 days, Net 30 days. (This discount applies only to merchandise; all freight charges are due in

full.)2. Repeated deviations or violation of our 30 day terms will result in an account being placed on credit hold and/or COD status.3. Accounts with invoices unpaid beyond 60 days will be placed on credit hold and no further tools or parts will be sold until the

account is current (No invoices open beyond 30 days).4. In the event collections are required, the customer is responsible for all costs of collection.

Pneumatic Tool Limited WarrantyTamco Inc., warrants its pneumatic tools to be free of defects in materials and workmanship, to the original purchaser, for a period of one year from the date of purchase. This warranty will not apply to any tool which Tamco Inc., deems to have been abused, modifi ed, misused, improperly maintained, inadequately lubricated, or repaired by anyone other than a authorized Tamco repair house. Authorization to return any pneumatic tool for evaluation must be obtained from Tamco’s customer service staff prior to return. All returns must be shipped prepaid to:

No collect shipments will be accepted. Pneumatic tools shipped without authorization will be returned to the customer. Tamco Inc., guarantees to repair or replace (at Tamco’s discretion) pneumatic tools at no charge to the original purchaser if defects in materials or workmanship exist at the time of inspection. Tamco Inc., makes no other expressed and/or implied warranty. Under no circumstances will Tamco Inc., be liable for damage to property or person, death, consequential, incidental, indirect or special damages of any nature arising from the sale or use of pneumatic tools.

General Tool WarrantyTamco Inc., products are guaranteed against defects and workmanship. Tamco Inc., cannot be responsible for failures due to normal wear. Any product that has been modifi ed, misused, abused, or suffered a lack of proper maintenance will not be recognized for a warranty claim. Warranty consideration will be given to any product found to have defects in work-manship or materials at the time of inspection. No other warranty is expressed or implied. Never use a tool for a purpose other than what is intended or designed for.

Safety Warnings and Cautions

1. ALWAYS wear approved safety gear such as hearing protection, safety glasses, hard hats, and safety shoes whenusing tools.

2. ALWAYS use the proper tool for the job. Do not use any tool other than the manner it was intended or designed for.3. NEVER strike a tool designed for an air hammer with a hand held hammer.4. NEVER use a pneumatic tool for prying. This can cause tool failure and/or operator injury.5. NEVER use a dull or improperly maintained tool. Failure to properly maintain tools will lead to tool failure and/or

operator injury.6. ALWAYS properly maintain air hammers. Worn parts, bushings, pistons, springs, etc can and will lead to premature

tool failure.7. ALWAYS warm tools prior to use in freezing temperatures.8. NEVER alter any tool in any way. This can cause tool failure and/or operator injury.9. ALWAYS use a silicon carbide grinding wheel on dull tools or drills with carbide cutting edges. Drills should be

sharpened regularly after drilling 25 or more holes, depending on the hardness and abrasiveness of the material.10. NEVER allow a pneumatic hammer to run idly. This practice allows undue stress to build in the tool and can lead to

premature tool failure and/or operator injury.11. ALWAYS use tools in accordance with all OSHA and MSHA regulations.

General Information and Terms of Sale

2

PB-90 PB-60 PB-40 PB-30Shank Size 1-1/8” x 6”

1-1/4” x 6”1-1/8” x 6”1-1/4” x 6”

1” x 4-1/4” 7/8” x 3-1/4”1” x 4-1/4”

Piston Stroke 6” (152mm) 4” (100mm) 5-3/4” (146mm) 3-11/32” (85mm)Piston Diameter 2-5/8” (66.67mm) 2-1/4” (57.15mm) 1-3/4” (44mm) 1-3/4” (44.45mm)Impact Rate 1,250 BPM 1,400 BPM 1,100 BPM 1,550 BPMWeight 92.4 lbs (42 kg.) 66 lbs. (30 kg.) 39.6 lbs. (18 kg.) 33 lbs. (15 kg.)Overall Length 28-1/2” (723mm) 25-3/8” (645mm) 26” (660mm) 22-1/4” (564mm)Air Consumption 77 CFM 70 CFM 56 CFM 49 CFMAir Inlet 3/4” NPT 3/4” NPT 1/2” NPT 3/8” NPTHose Size 3/4” (19mm) 3/4” (19mm) 3/4” (19mm) 3/4” (19mm)

Toku paving breakers offer a rugged and reliable tool for whatever task you may have for them. Toku breakers are available in 30, 40, 60, and 90 pound classes. All Toku breakers feature a rugged four bolt back head, drop forged alloy steel construction, forged latch retainers, replaceable chuck bushings, and safety triggers. Optional muffl ers are available.

Toku 30 and 40 pound hammers are the perfect size and weight for light to medium construction. These tools work great for demolishing black top, masonry walls, bridge decks, or digging in frozen soil.

The Toku 60 and 90 pound class breakers are designed with larger demolition jobs in mind. Whether it’s breaking rock, reinforced concrete, or pavement, these breakers have plenty of power to get the job done.

****Please note that hoses and fi ttings are not included.****

Air Tools - Paving Breakers

PB-90 PB-60 PB-40 PB-30

TD-30 CD-30 CD-20Shank Size 7/8” x 3-1/4”

1” x 4-1/4”7/8” x 3-1/4”1” x 4-1/4”

7/8” x 3-1/4”

Piston Stroke 3-11/32” (85mm) 3-11/32” (85mm) 2-3/8” (60mm)Piston Diameter 1-3/4” (44.45mm) 1-3/4” (44.45mm) 1-11/16” (42.85mm)Impact Rate 1,550 BPM 1,550 BPM 2,000 BPMWeight 36 lbs. (16.3 kg.) 30 lbs. (13.6 kg.) 22 lbs. (10 kg.)Overall Length 29” (736mm) 22” (559mm) 20” (520mm)Air Consumption 49 CFM 49 CFM 38 CFMAir Inlet 3/8” NPT 3/8” NPT 1/2” NPTHose Size 3/4” (19mm) 3/4” (19mm) 3/4” (19mm)

When it comes to digging packed soil and clay from around forms, footers, or any other construction area, you can be sure Tamco has a Toku digger to fi t your needs. With three models to choose from, you are sure to fi nd the right tool for the job at hand. The CD-30 and CD-20 are D-handled tools that offer maneuverability and strength in a compact package. The TD-30 offers the comfort and control of a T-handle with the same power and performance as the CD-30.

Toku diggers and trenchers feature four bolt back heads, drop forged alloy steel construction, forged latch retainers, replaceable chuck bushings, and safety triggers. Optional muffl ers are available.

Air Tools - Clay Diggers / Trenchers

CD-20CD-30TD-30

TS-55 TJ-20 TJ-15 THD-1100N CP9-AShank Size 7/8” x 3-1/4”

7/8” x 4-1/4”1” x 4-1/4”

7/8” x 3-1/4”7/8” x 4-1/4”

7/8” x 3-1/4”7/8” x 4-1/4”

7/8” x 3-1/4” 3/4” RoundSlotted

Piston Stroke 2-9/16” (65mm) 1-15/16” (49mm) 1-3/4” (45mm) 1-7/32” (31mm) 1-3/8”Piston Diameter 2-5/8” (66.6mm) 2-11/16” (68mm) 2-1/8” (54mm) 1-1/2” (38mm) 1-1/4”Impact RateSpeed

1,800 BPM200 RPM

2,400 BPM200 RPM

2,450 BPM250 RPM

3,200 BPM350 RPM

3,400 BPM

Weight 59.4 lbs. (27 kg.) 40.7 lbs. (18.5 kg.) 30.8 lbs. (14 kg.) 11.4 lbs. (5.2 kg.) 8 lbs. (3.63 kgs.)Overall Length 22-3/8” (568mm) 24-1/32” (610mm) 18-1/2” (468mm) 16-17/32” (420mm) 14-3/4”Air Consumption 91.81 CFM 87.5 CFM 56 CFM 28.3 CFM 20 CFMAir Inlet 3/4” NPT 3/4” NPT 3/4” NPT 3/8” NPT 3/8” NPTHose Size 3/4” (19mm) 3/4” (19mm) 3/4” (19mm) 1/2” (12.7mm) 1/2” (12.7mm)

We offer multiple rock drills for a wide variety of applications. Whether you are drilling through rock, concrete, or brick, Tamco offers a rock drill that will fi t your distinct requirements.

The Toku TS-55 rock drill has all the power needed for the biggest jobs. It features rugged construction and is designed for larger diameter bits and deeper drilling jobs.

The Toku TJ-20 and TJ-15 are mid-sized rock drills that pack a big punch. These drills are great for road building, shaft sinking, quarrying, as well as general demolition or construction work. Both models include standard, removable in line oilers.

The Tamco CP9-A and Toku THD-1100N are lightweight drills that are able to get into smaller spaces other drills cannot. These D-handled drills pack big power in a compact package. Recommended operation pressure is 80 - 90 PSI. Exceeding 90 PSI may cause internal damage.

All rock drills feature replaceable chuck bushings, drop forged alloy steel construction, and forged latch retainers. Muffl ers are available for the TS-55, TJ-20, and TJ-15 models. TJ-20 and TJ-15 models include Clear-View in line oilers.

Air Tools - Rock Drills

Toku rivet busters are the ideal tool for any mid-sized demolition job you can throw at them. They perform under the toughest conditions, whether you’re demolishing bridge decks, parking garages, ripping tanks, cutting rivet heads, or any demolition work. These hard hitting tools simply perform.

The Toku line of rivet busters are available with goose-neck or D-handles, and are available for either small buster or jumbo buster steel. All Toku rivet busters feature drop forged alloy handles, outside or inside trigger designs, heat treated alloy cylinders, exhaust defl ectors, and safety piston stoppers.

The Toku tamper is a rugged tool that comes with a steel tamping pad for compacting soil and substrate material around foundations, trenches, poles and other compacting applications. Optimal operating performance is achieved at 80 p.s.i. for this particular tool.

Air Tools - Rivet Busters / Tampers

RB-70RB-70D (D Handle)

RB-91HPRB-91HPD (D Handle)

RB-110RB-110D (D Handle)

TOKUJET-06

Shank Size 1-1/8” Shank 1-1/8” Shank 1-1/8” Shank N/APiston Stroke 7-3/8” (250mm) 8-15/16” (227mm) 11-15/16” (303mm) 5-1/2” (140mm)Piston Diameter 1-3/16” (27mm) 1-3/16” (30.2mm) 1-3/16” (30.2mm) 1-1/2”(38mm)Impact Rate 940 BPM 700 BPM 680 BPM 750 BPMWeight **28 lbs. (12.70) 32 lbs. (14.3 kg.) 35 lbs. (14.6 kg.) 39.6 lbs. (18.0 kg.)Overall Length 19-3/4” (501.65mm) 22-29/32” (582mm) 26” (660mm) 49”(1240mm)Air Consumption 37 CFM 36.0 CFM 32.9 CFM 35.2 C.F.M.Air Inlet 3/8” NPT 3/8” NPT 3/8” NPT 1/2” NPTHose Size 1/2” (19mm) 1/2” (19mm) 1/2” (19mm) 1/2” (12.7mm)

D-Handle

**See Page 14**

Upper/Lower Sleeves Rubber Bumper and

Lock Spring

** D Handle - 30 lbs.

THA-1B THA-2B THA-3B THA-4BShank Size .680” Round Shank or .580” Hex Shank with Round or Oval Collar (Please Specify)

Piston Stroke 1” (25.4mm) 2-3/32” (51mm) 2-17/32” (64mm) 4-1/32” (102mm)Piston Diameter 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm)Impact Rate 2,500 BPM 2,300 BPM 2,200 BPM 1,800 BPMWeight 14.8 lbs. (5.9 kg.) 15.8 lbs. (6.2 kg.) 16.5 lbs. (6.8 kg.) 18.25 lbs. (7 kg.)Overall Length 15-9/32” (388mm) 16-1/4” (413mm) 17-23/32” (450mm) 18-29/32” (480mm)Air Consumption 28 CFM 29.75 CFM 31.8 CFM 33.25 CFMAir Inlet 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPTHose Size 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm)

Toku’s THA series of gooseneck chipping hammers are available in 1” through 4” stroke lengths. The THA series utilizes a saw tooth connection between the handle and cylinder which provides a more secure, positive fi t.

Toku’s rugged TCH series of “D-handle” chipping hammers are available in 2” through 4” stroke lengths. All TCH series chipping hammers feature drop forged handles, replaceable bushings, heat treated alloy cylinders, and exhaust defl ectors. The TCH line of hammers features a rock solid four bolt handle for maximum reliability and durability which allows a sure grip in all conditions. The TCH series is designed to only operate when the chisel is in contact with the work surface to avoid excessive wear caused by dry fi ring.

Toku’s AA-0S chipping hammer proves bigger is not always better. It’s lightweight and compact size allows for greater fl exibility when working in tight spaces or small enclosures. The AA-0S is small on size but big on power.

AA-OS TCH-2 TCH-3 TCH-4Shank Size .680” Round Shank or .580” Hex Shank with Round or Oval Collar (Please Specify)

Piston Stroke 1-13/16” (45mm) 2” (50.8mm) 2-1/2” (63.5mm) 4” (101.6mm)Piston Diameter 7/8” (22.2mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm) 1-1/8” (28.54mm)Impact Rate 3,000 - 3,200 BPM 2,600 - 2,800 BPM 2,000 - 2,200 BPM 1,600 - 1,800 BPMWeight 7.9 lbs. (3.6 kg.) 18 lbs. (8.1 kg.) 19 lbs. (8.55 kg.) 20 lbs. (9 kg.)Overall Length 12-3/4” (374.65mm) 14-3/4” (374.65mm) 16” (406.4mm) 17” (431.79mm)Air Consumption 22.95 CFM 29.75 CFM 31.5 CFM 33.25 CFMAir Inlet 3/8” NPT 7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPTHose Size 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm) 1/2” (12.7mm)

Air Tools - Chipping Hammers

The Toku THA series chipping hammers feature alloy steel drop forged handles, replaceable bushings, heat treated alloy cylinders, reliable ring valve design, and exhaust defl ectors. Optional quick connect retainers are available for all models.

e secure,

RB-133 RB-1133 RB90 / RB91 CP-4181Shank Size 1-1/8” 1-1/8” 1” / 1-1/8” 1-1/8”Bore 1-3/16” 1-3/16” 1-1/16” (27mm) 1-3/16”Stroke 8” 11” 9-27/32” (250mm) 11”Impact Rate 960 BPM 850 BPM 900 BPM 720 BPMLength 22” 25” 21-1/16” / 20-92/32 26”Weight 30 lbs. 34 lbs. 28 lbs. 34.5 lbs.Air Inlet 3/8” 3/8” 3/8” 3/8”Air ConsumptionHose Size

44 C.F.M.1/2”

39 C.F.M.1/2”

27.9 C.F.M.1/2”

39 C.F.M.1/2”

Air Tools - American MadeIf an American made air tool is required for your job, this is your tool. Tamco rivet busters are manufactured domestically and are a great addition to your tool needs. These tools are manufactured by American craftsmen and manufactured using high quality U.S. made components.

The Tamco brand of rivet buster will perform tasks such as bridge-deck repair, vertical and / or horizontal concrete demolition, busting rivets and bolts, and for use on underground tanks.

Try the CP-4181 model for the really tough job.

**See Page 14**

Upper/Lower Sleeves Rubber Bumper and

Lock Spring

SF-A1L1 SF-A1L2 SF-A182NS SF-A182WFBore 1” 1” 15/16” 15/16”Stroke 1-1/8” 1-1/8” 1-1/16” 1-1/16”Impact Rate 4,600 B.P.M. 4,600 B.P.M. 4,000 B.P.M. 4,000 B.P.M.Length 17” 10” 18” 9”Weight 6.25 lbs. 4.20 lbs. 6.00 lbs. 4.00 lbs.Air Inlet 1/4” 1/4” 1/4” 1/4”Air Consumption 12 C.F.M. 12 C.F.M. 13 C.F.M. 13 C.F.M.

The SF-A1L1 and SF-A1L2 weld fl ux and needle scalers utilize Cleco style steel and are available with standard throttles, push type throttles, or solid backhead type.

The SF-A182 series of weld fl ux and needle scalers use Ingersoll-Rand style steel and are available with standard throttle, solid backhead, or pistol grip styles.

Our line of weld fl ux and needle scalers use advanced materials for greater longevity and weight reduction. Tools convert from needle scaler to weld fl ux scaler quickly and easily.

We also offer an imported version of the Cleco weld fl ux and needle scaler, as well as replacement parts and needles for all of the tools.

Air Tools - Weld Flux / Needle Scalers

SF-1BA SF-2BAR SF-OBR SF-00BABore 1” 1” 1” 11/16”Stroke 4” 2-1/2” 2” 2”Taper/Diameter 0.802” 0.802”/.687” 0.802”/.645” S Taper/.460”Impact Rate 1,240 B.P.M. 1,725 B.P.M. 2,500 B.P.M. 1,600 B.P.M.Length 20-1/4” 15-1/4” 16-1/2” 11-3/4”Weight 10 lbs. 7.125 lbs. 6.65 lbs. 3.75 lbs.Air Inlet 3/8” 3/8” 1/4” 3/8”Butt Diameter 2-1/2” 2-1/2” 2-1/2” 1-3/4”

Tamco offers a variety of rammers for the job site, foundry, or mill. All tools feature heat treated alloy steel cylinders, innovative features and rugged construction. Tamco has the ideal tool for any of your compaction needs.

These rugged and reliable tools will provide years of service on any job site.

Optional steel or rubber heads are available for all Tamco rammers.

Air Tools - Rammers

Scabbler and Inline OilersTamco offers a Triple-piston Scabbler for use in roughing up concrete and steel surfaces. The three piston action will help remove a variety of unwanted surface debris for a variety of applications, including paint and rust removal.

SF-T3Triple Piston Scabblerbl

Bore 1” Length 11”Stroke 13/16” Weight 8.25 lbs.Impact Rate 5,200 B.P.M. Air Inlet Thread 3/8”Height 5-7/8” Air Consumption 15 C.F.M.

Triple Piston Scabbler AccessoriesPart Number Description PriceSF-00146 Steel Piston $54.00SF-00146C Carbide Piston $115.89SF-00146REX Rexalloy Piston - Spark Resistant $309.45

Part Number

In-Line Oilers Description Price

TAM-0L In-Line Oiler 1.4 Fluid Oz. $69.78TAM-1L In-Line Oiler 3.7 Fluid Oz. $72.35TAM-2L In-Line Oiler 11.0 Fluid Oz. $88.45TAM-3L In-Line Oiler 16.0 Fluid Oz. $117.01430101V0J L0-15 Clearview In-Line Oiler 6.0 Fluid Oz. $199.30

Toku Whip HosesPart Number Description Net PriceTAM-WH5-3/8 5 foot Whip Hose - 3/8” NPT Swivel End, rated 250 PSI $34.95TAM-WH5-7/8 5 foot Whip Hose - 7/8” x 24” Thread/In Swivel End, rated 250 PSI $27.95TAM-WH10-3/8 10 foot Whip Hose - 3/8” NPT Thread/In Swivel End, rated 250 PSI $38.95TAM-WH10-1/2 10 foot Whip Hose - 1/2” NPT Swivel End, rated 250 PSI $33.50TAM-WH10-7/8 10 foot Whip Hose - 7/8” X 24” Thread/In Swivel End, rated 250 PSI $33.50TAM-AH50 50 foot Air Hose - 3/4” Hose w/Universal Fitttings, rated 250 PSI $40.75

Air Tool Accessories

Whip ChecksPart Number Description List PriceTAM-WA2 Safety Cable - 1/4” x 38” - Fits hose sizes 1-1/2” to 3” $16.43 TAM-WB1 Safety Cable - 1/8” x 20” - Fits hose sizes 1/2” to 1-1/4” $8.87

(Side Rod Kit) SRKIT-60 OR SRKIT-90Part Numbers include:

Description List Price

131501017 / ..........131501016

Front Head Bolt for 90lb Paving Breaker / for 60 lb Paving Breaker

410241550130801043

Front Head Bolt Nut Front Head Bolt Spring

$72.25

410241560 Front Head Bolt Lock Washer

Assembled

(Latch Kit) LKIT-60/90Part Numbers include:

Description List Price

410241610 Steel Retainer Latch131303048 Washer136301010R Bushing410241650 Plunger $94.30130801042 Spring410241620 Bolt134601019 Nut

Air Tool Accessories

RetainersPart Number Description List PriceT25119002 Oval Retainer - Solid Type (Fits Toku THA, THH, and TCH Series Chippers) $49.41T25119000R Round Retainer - Solid Type (Fits Toku THA, THH, and TCH Series Chippers) $49.41T25129103 Deluxe Quick Change Retainer (Fits Toku THA, THH, and TCH Series Chippers) $121.11Y10298230 Oval Retainer - Solid Type (Fits Toku AA-0S Series Chippers) $87.41Y10298230R Round Retainer - Solid Type (Fits Toku AA-0S Series Chippers) $87.41

AccessoriesPart Number Description List PriceY10212300 Retainer Spring (Fits Toku THH, THA, TCH, and AA-0S Series Chippers) $1.50SF-01038 3/8” NPT x 1/2” Hose Barb Swivel Assembly $29.82SF-01040 7/8” x 24 Threads/In x 1/2” Hose Barb Swivel Assembly $19.75SF-01060 1/2” NPT x 1/2” Hose Barb Swivel Assembly $19.75SF-UF37 3/8” Female Universal Chicago Fitting $9.51SF-UM37 3/8” Male Universal Chicago Fitting $8.85SF-UF50 1/2” Female Universal Chicago Fitting $8.13SF-UM50 1/2” Male Universal Chicago Fitting $7.70SF-UF75 3/4” Female Universal Chicago Fitting $8.90SF-UM75 3/4” Male Universal Chicago Fitting $8.25

Muffl ersPart Number Description List Price41027187C Muffl er for a PB 90 $272.3441024187C Muffl er for a PB 60 $215.0741023187C Muffl er for a PB 40 $186.3541020187C Muffl er for a PB 30 $186.35430101Y1C Muffl er for a TJ-15 $134.15

Air Tool Accessories / Nail StakesPart Number

Rivet Buster Accessories Description

List Price

T33210100 Jumbo Buster Upper Sleeves $12.00T33210300 Jumbo Buster Lower Sleeves $14.95T33210300S Jumbo Buster Lower Sleeves (Split) $17.50T33210400 Jumbo Buster Rubber Bumper $3.00T33210400PJR Jumbo Buster Poly Red Bumper $5.30T33219400 Jumbo Buster Lock Spring $2.30(Assembled

with steel)

Poly or black rubberBumpers

Upper Sleeve and Lower SleeveLock Spring

***This item is sold in carton quantities only.*** Stakes are completely boxed. They are also manufactured from high carbon

material to assure easy driving, and long life.

Nail Stakes With HolesPart Number Size

QuantityCarton/Pallet List

PriceSTAKE3418 3/4” X 18” 10 PER CARTON 60 / PAL $15.75STAKE3424 3/4” X 24” 10 PER CARTON 50 / PAL $21.00STAKE3430 3/4” X 30” 10 PER CARTON 30 / PAL $26.25STAKE3436 3/4” X 36” 10 PER CARTON 30 / PAL $31.50STAKE3448 3/4” X 48” 10 PER CARTON N/A $49.50STAKE7818 7/8” X 18” 10 PER CARTON 50 / PAL $25.25STAKE7824 7/8” X 24” 10 PER CARTON 40 / PAL $32.00STAKE7830 7/8” X 30” 10 PER CARTON 25 / PAL $37.75STAKE7836 7/8” X 36” 10 PER CARTON 25 / PAL $45.00

Also available in solid style (without holes).

These Nail Stakes are American made!

Cleco Style ShankDescription 7” Part

NumberWt. List

Price12” Part Number

Wt. List Price

18” Part Number

Wt. List Price

1-3/8” Std. Wide Scaler 1851-007 0.50 $9.00 1851-012 0.75 $11.30 1851-018 1.25 $13.652” Wide Scaler 1807-007 0.50 $20.70 1807-012 0.75 $23.75 1807-018 1.50 $37.853” Wide Scaler 1842-007 0.50 $25.20 1842-012 1.00 $27.70 1842-018 1.50 $41.853/4” Wide Narrow Scaler 1853-007 0.50 $8.40 1853-012 0.75 $10.50 1853-018 1.25 $13.051-3/8” Wide Spoon Scaler 1854-007 0.50 $9.00 1854-012 0.75 $11.30 1854-018 1.25 $13.65Bull / Moil Point 1811-007 0.50 $10.35 1811-012 0.75 $12.65 1811-018 1.25 $15.15

Ingersoll-Rand Style ShankDescription 7” Part

NumberWt. List


Wt. List Price

18” Part Number

Wt. List Price

1-3/8” Std. Wide Scaler 2051-007 0.50 $9.00 2051-012 0.75 $11.30 2051-018 1.25 $13.352” Wide Scaler 2007-007 0.50 $20.70 2007-012 1.00 $23.75 2007-018 1.50 $37.853” Wide Scaler 2042-007 0.50 $25.20 2042-012 1.00 $27.70 2042-018 1.40 $41.853/4” Wide Narrow Scaler 2053-007 0.75 $8.40 2053-012 0.75 $10.50 2053-018 1.25 $13.051-3/8” Wide Spoon Scaler 2054-007 0.50 $9.00 2054-012 0.75 $11.30 2054-018 1.25 $13.65Bull / Moil Point 2011-007 0.50 $10.35 2011-012 0.75 $12.65 2011-018 1.25 $15.15

Chicago Pneumatic Style ShankDescription 7” Part

NumberWt. List


Wt. List Price

18” Part Number

Wt. List Price

1-3/8” Std. Wide Scaler 2151-007 0.50 $9.00 2151-012 0.75 $11.30 2151-018 1.25 $13.652” Wide Scaler 2107-007 0.50 $20.70 2107-012 1.00 $23.75 2107-018 1.50 $37.853” Wide Scaler 2142-007 0.75 $25.20 2142-012 1.00 $27.70 2142-018 1.50 $41.853/4” Wide Narrow Scaler 2153-007 0.50 $8.40 2153-012 0.75 $10.50 2153-018 1.25 $13.051-3/8” Wide Spoon Scaler 2154-007 0.50 $9.00 2154-012 0.75 $11.30 2154-018 1.25 $13.65

.401 Parker Taper Style ShankPoint Style 7” Part

NumberList


List Price

18” PartNumber

List Price

24” PartNumber

List Price

Flat 1/2” Wide Chisel 2201-007 $11.35 2201-012 $13.95 2201-018 $23.10 2201-024 $32.10Offset 1/2” Flat Chisel 2202-007 $11.90 2202-012 $14.60 2202-018 $23.75Sidecut 1/2” Chisel 2203-007 $11.35 2203-012 $13.95 2203-018 $23.10Wide Flat 1-1/4” Blade 2205-007 $14.55 2205-012 $17.20 2205-018 $26.25 2205-024 $35.25Bull/Moil Point 2211-007 $11.35 2211-012 $13.95 2211-018 $23.10Flat 3/4” Chisel 2253-007 $11.35 2253-012 $13.95 2253-018 $23.10 2253-024 $32.10

Weld Flux / Scaler Steel

Part Number Description Lgth. Wt. Box Qty. List PriceThis tool fi ts: Hilti TE54, RE55, 705, TE74, TE75, TE76 ATC, TE504, TE505, & TE704; Bosch 11227E, 11230EVS, 11231EVS, 11313EVS, 11311EVS, 11312E, 11214E, 11214EVS, 11216EVS, & 11309EVS; SDS Max T-19; Wacker EHB75M

SDS Max 44-01911T44-01912T44-01913T44-01914T44-01917T44-01910T44-01908T44-01909T

Chisel 1” BladeChisel 1” Blade

Moil PointMoil Point

Scaling Chisel 2” BladeScaling Chisel 3” Blade

Detachable ShankBushing Tool (16 Teeth)

12”18”12”18”12”12”12”10”

1.251.751.251.751.251.501.002.75

2525252525252515

$13.70$17.75$13.70$17.75$25.80$28.45$30.70$59.25

Part Number Description Lgth. Wt. Box Qty. List PriceThis tool fi ts: Bosch 11304

1-1/8” Electric 44-02161T44-02163T44-02164T44-02167T44-02169T

Moil PointNarrow ChiselChisel 3” Blade

Asphalt Cutter 5” BladeClay Spade

21-1/2”21-1/2”

16”20”20”

6.006.006.758.509.75

88858

$27.05$27.05$46.00$91.45$92.20

Part Number Description Lgth. Wt. Box Qty. List PriceThis tool fi ts: Black & Decker 5021K; Bosch 11302, 11303, & 11305; Milwaukee 5355; Hitachi H55SC; Dewalt 551 & 558; and Kango 900S

3/4” Hex 44-01517T44-01518T44-01515T44-01516T44-01529T44-01503T44-01508T44-01520T44-01504T44-01524T44-01506T



Scaling Chisel 2” BladeScaling Chisel 3” Blade

Bushing Tool (Shank Only)Bushing Tool (1 Pc.)

Clay SpadeGround Rod Driver

Asphalt Cutter

12”18”12”18”12”12”7”

10”18”12”18”

1.502.251.502.251.752.251.002.754.503.004.50

25252525252525155

105

$11.75$14.20$11.75$14.20$21.15$30.10$13.70$57.45$66.15$91.95$78.15

Part Number Description Lgth. Wt. Box Qty. List PriceThis tool fi ts: Bosch 11202, 11203, 11204, 11205, 11209, 11214, 11306, & 11310; AEG PHD26, PH38, & PHA38; Black & Decker 5041, 5042, 5043, 5044, & 5016K; Hitachi DH3YA, DH38YE, DH38YF, DH50SB, & H45SB; Kango 5015, 637S, 638S, 950S; Makita HR 3851; Matebo RH66, RH99, & 1129; Milwaukee 5343, 5347, & 5348; Ramset 442, 445, & 475; Red-Head 747-2; Ryobi ED382 & ER382; Wacker EHB7S

Spline Drive 44-01811T44-01812T44-01813T44-01814T44-01817T44-01819T44-01810T44-01818T44-01809T44-01822T44-01824T



Scaling Chisel 2” BladeScaling Chisel 2” BladeScaling Chisel 3” Blade

Bushing Tool (Shank Only)Bushing Tool (1 Pc.)

Clay SpadeGround Rod Driver

12”18”12”18”12”18”12”7”

10”18”12”

1.502.251.502.251.752.502.251.002.754.503.00

2525252525252525155

10

$11.15$12.95$11.15$12.95$21.65$24.95$28.40$13.70$59.25$67.90$93.10

Electric Demo Hammer Steel

1.) MOIL POINT

2.) CROSS CUT CHISEL

3.) INLINE CHISEL

4.) WIDE CROSS CUT CHISEL

5.) WIDE INLINE CHISEL

6.) BLUNT

Boom Mounted Demo Steel

We offer a line of Boom Mounted Demo Tools for these manufacturers:

Allied Atlas Copco Bobcat / Melroe CaterpillarKent Husky / IPCIndeco OkadaNPK RammerStanley TramacBTI / Teledyne / Toku Magnum JCB Soosan

We are currently stock these brands:

Allied Atlas Copco Bobcat CaterpillarCP KentHusky / IPC IndecoOkada NPKTramac Toku/Striker Magnum

Narrow Chisel

Moil Point Shank Size Lgth UC

Wt. Box Qty

List Price

Heavy Duty Moil Points and Narrow Chisels

4001-014H4001-018H

4011-014H4011-018H 7/8” x 3-1/4” 14”

18”3.754.50

$33.90$38.50

4002-014H4002-018H

4012-014H4012-018H 1” x 4-1/4” 14”

18”5.256.25

$31.55$35.70

4003-014H4003-018H

4013-014H4013-018H 1-1/8” x 6” 14”

18”6.758.25

$35.75$41.60

4004-014H 4014-014H 1-1/4” x 6” 14” 8.00 $41.60

Narrow Chisel

Moil Point Shank Size Lgth UC Wt. Box Qty List Price

4001-0144001-0184001-0244001-0364001-0484001-0604001-0724001-0844001-096

4011-0144011-0184011-0244011-0364011-0484011-0604011-0724011-0844011-096

7/8” x 3-1/4”

14”18”24”36”48”60”72”84”96”

3.254.005.257.509.75

12.0014.2516.5018.00

1212

$21.80$23.80$29.40$42.60$55.75$69.00$82.15$95.35

$108.504001-014X4001-018X

4011-014X4011-018X 7/8” x 4-1/4” 14”

18”3.504.25

$24.70$26.65

4002-0144002-0184002-0244002-0364002-0484002-0604002-0724002-0844002-096

4012-0144012-0184012-0244012-0364012-0484012-0604012-0724012-0844012-096

1” x 4-1/4”

14”18”24”36”48”60”72”84”96”

4.505.506.75

10.0013.0015.7518.7521.7524.50

1210

$23.15$26.20$30.15$45.05$59.95$74.85$89.80

$104.65$119.60

4003-0144003-0184003-0244003-0364003-0484003-0604003-0724003-0844003-096

4013-0144013-0184013-0244013-0364013-0484013-0604013-0724013-0844013-096

1-1/8” x 6”

14”18”24”36”48”60”72”84”96”

6.007.259.50

13.2517.0020.5024.0028.0031.75

87

$26.20$29.30$34.35$53.10$71.85$90.60

$109.35$128.10$146.85

4004-0144004-0184004-0244004-0364004-0484004-0604004-0724004-0844004-096

4014-0144014-0184014-0244014-0364014-0484014-0604014-0724014-0844014-096

1-1/4” x 6”

14”18”24”36”48”60”72”84”96”

7.509.0011.2515.7520.5025.0029.5034.0038.75

87

$30.15$32.85$38.55$65.50$92.45

$119.45$146.35$173.30$200.25

Moil Points and Narrow Chisels

**Longer lenghts available**

Paving Breaker Steel

Part Number Shank Size Lth UC Wt. Box Qty

List Price

Heavy Duty 3” Wide Chisels 4021-014H4021-018H 7/8” x 3-1/4” 14”

18”5.006.00

$44.80$48.70

4022-014H4022-018H 1” x 4-1/4” 14”

18”5.256.25

$43.75$49.60

4023-014H4023-018H 1-1/8” x 6” 14”

18”7.008.25

$49.60$54.50

4024-014H4024-018H 1-1/4” x 6” 14”

18”8.50

10.25$54.60$62.25

Part Number Shank Size

Length UC

Wt. Box Qty

List Price

3” Wide Chisels 4021-0144021-0184021-0244021-0364021-0484021-0604021-0724021-096

7/8” x 3-1/4”

14”18”24”36”48”60”72”96”

3.254.005.508.00

10.0012.2514.0018.25

1212

$30.15$32.85$39.45$62.95$86.45

$109.95$133.50$180.45

4021-014X4021-018X 7/8” x 4-1/4” 14”

18”3.504.25

$32.95$35.75

4022-0144022-0184022-0244022-0364022-0484022-0604022-0724022-0844022-096

1” x 4-1/4”

14”18”24”36”48”60”72”84”96”

4.505.507.50

10.0012.7516.5019.2522.0024.00

1210

$30.75$35.60$41.90$68.85$95.75

$122.75$149.70$176.65$203.55

4023-0144023-0184023-0244023-0364023-0484023-0604023-0724023-0844023-096

1-1/8” x 6”

14”18”24”36”48”60”72”84”96”

6.007.259.75

13.5017.2521.0024.7528.5032.00

87

$34.35$36.75$45.55$76.55

$107.45$138.45$169.40$200.35$231.30

** Longer lengths available **

4024-0144024-0184024-0244024-0364024-0484024-0604024-0724024-0844024-096

1-1/4” x 6”

14”18”24”36”48”60”72”84”96”

7.509.00

12.2516.7521.2526.0030.0035.0039.50

86

$37.75$42.05$50.00$87.75

$125.40$163.10$200.90$238.60$276.30

Paving Breaker Steel

Part Number Shank Size Blade Size Wt. Box Qty List Price

Part Number Shank Size Blade Size Wt. List PriceClay Spades 4111-016

4111-016X4102-0164103-0164104-016

7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

5-1/2”

7.007.257.258.5011.00

$105.30$107.50$105.30$111.95$117.80

4102-9164103-9164104-916

1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

4-1/2”7.008.00

10.50

$107.50$114.15$121.00

Part Number Shank Size Length UC Wt. List PriceFrost Wedges 4081-017

4081-017X4082-0174083-0174084-017

7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

16-1/2”

7.007.25

10.0013.0018.00

$99.75$99.75$98.25

$102.15$105.90

Part Number Shank Size Length UC Wt. List PriceBushing Tools 4131-012

4132-0094133-0094134-009

7/8” x 3-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

12”

5.006.507.007.25

$108.55$96.55$99.55

$104.30

Part Number Shank Size Length UC Wt. List PriceSuper-Kut Chisels 4043-016

4044-0161-1/8” x 6”1-1/4” x 6”

16” 8.009.25

$57.05$64.20

Part Number Shank Size Length UC Wt. List PriceConcrete Busters 4096-014

4097-0141-1/8” x 6”1-1/4” x 6”

14-1/2” 11.2512.25

$111.45$120.00

Asphalt Cutters 4061-0124061-012X4062-0124063-0124064-012

7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

5” x 6”

6.757.007.258.509.25

555

$76.00$76.00$83.95$77.95$79.90

Paving Breaker Accessories

Part Number Shank Size Length UC Wt. List PriceCombo Cutters 4063-011.5

4064-011.51-1/8” x 6”1-1/4” x 6”

11-1/2” 8.058.65

$87.45$90.05

Part Number Shank Size Description Wt. List PriceDetachable Shanks 44-00307

44-00307X44-0030844-0030944-00310

7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

Small Taper Shank

9” Under Collar

3.754.004.505.256.00

$59.70$60.85$59.70$63.10$67.75

44-00308L44-00309L44-00310L

1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

Large Taper Shank

9” Under Collar

4.505.256.00

$60.20$64.00$68.55

Part Number Lgth UC Wt. List PriceSheathing Driver (Head Only)**Use Large Taper Detachable Shanks**

44-0136344-01364

2”3”

17.2522.25

$160.25$167.20

Part Number Description Wt. List PriceTamping Pads (Pads Only)**Use Large Taper Detachable Shanks**

44-0135244-0136044-01362

7” Round Pad6” Square Pad8” Square Pad

11.7510.0014.50

$109.40$109.40$137.10

Part Number Description Wt. List PriceSign Post Driver (Heads Only)**Use Small Taper Detachable Shanks**

44-0191044-01911

3-1/2” ID Driver OnlyPost Block Insert Only

14.254.00

$109.45$61.35

Part Number Shank Size Rod Size Hole Dia. Wt. List PriceGround Rod Drivers 4162-609

4162-7094162-8094162-909

1” x 4-1/4”

5/8”3/4”7/8”1”

11/16”13/16”

1”1-1/8”

5.25$75.50$75.50$85.20$93.35

4163-6094163-7094163-8094163-909

1-1/8” x 6”

5/8”3/4”7/8”1”

11/16”13/16”

1”1-1/8”

6.75

$79.75$79.75$89.25$98.40

4164-6094164-7094164-8094164-909

1-1/4” x 6”

5/8”3/4”7/8”1”

11/16”13/16”

1”1-1/8”

7.25

$85.80$85.80$95.50

$108.55

Part Number Shank Size Blade Size Wt. List PriceDigging Chisel 4071-016

4071-016X4072-0164073-0184074-018

7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1-1/8” x 6”1-1/4” x 6”

3” x 10”

7.507.758.00

10.0011.50

$92.35$92.35$92.35$96.35$99.95

Paving Breaker Accessories

Length Weight RSOR HSOR RSRR HSRR Box Qty List PriceFlat Chisels 9”

12”18”24”36”48”60”72”84”96”

1.251.752.503.005.256.009.009.2512.5014.50

1401-0091401-0121401-0181401-0241401-0361401-0481401-0601401-0721401-0841401-096

1501-0091501-0121501-0181501-0241501-0361501-0481501-0601501-0721501-0841501-096

1601-0091601-0121601-0181601-0241601-0361601-0481601-0601601-0721601-0841601-096

1701-0091701-0121701-0181701-0241701-0361701-0481701-0601701-0721701-0841701-096

25252015

$11.95$14.05$18.40$22.65$31.55$40.50$49.40$58.35$67.25$76.25

Length Weight RSOR HSOR RSRR HSRR Box Qty List PriceBull / Moil Points 9”

12”18”24”36”48”60”72”84”96”

1.251.752.503.505.257.009.2511.0012.5014.50

1411-0091411-0121411-0181411-0241411-0361411-0481411-0601411-0721411-0841411-096

1511-0091511-0121511-0181511-0241511-0361511-0481511-0601511-0721511-0841511-096

1611-0091611-0121611-0181611-0241611-0361611-0481611-0601611-0721611-0841611-096

1711-0091711-0121711-0181711-0241711-0361711-0481711-0601711-0721711-0841711-096

25252015

$11.95$14.05$18.40$22.65$31.55$40.50$49.40$58.35$67.25$76.25

Length Weight RSOR HSOR RSRR HSRR Box Qty List Price2” Wide Flat Blade 9”

12”18”24”36”48”60”72”84”96”

1.251.752.503.505.257.009.2511.0012.5014.50

1407-0091407-0121407-0181407-0241407-0361407-0481407-0601407-0721407-0841407-096

1507-0091507-0121507-0181507-0241507-0361507-0481507-0601507-0721507-0841507-096

1607-0091607-0121607-0181607-0241607-0361607-0481607-0601607-0721607-0841607-096

1707-0091707-0121707-0181707-0241707-0361707-0481707-0601707-0721707-0841707-096

25252015

$15.85$17.85$21.35$25.50$35.40$45.25$55.05$64.95$74.80$84.70

Length Weight RSOR HSOR RSRR HSRR Box Qty List Price3” Wide Flat Blade 12” 2.00 1442-012 1542-012 1642-012 1742-012 15 $37.20

RSOR HSOR RSRR HSRR

Chipping Hammer Steel

Non-Retainer Steel Flat ChiselLength Round Shank

3/4” StockHex Shank3/4” Stock

List Price

Round Shank7/8” Stock

Hex Shank7/8” Stock

List Price

9”12”18”24”36”48”60”

1001-0091001-0121001-0181001-0241001-0361001-0481001-060

1201-0091201-0121201-0181201-0241201-0361201-0481201-060

$10.15$13.20$16.20$19.55$30.05$40.50$51.00

1101-0091101-0121101-0181101-0241101-0361101-0481101-060

1301-0091301-0121301-0181301-0241301-0361301-0481301-060

$12.55$15.70$18.85$22.30$33.25$44.10$55.00

Non-Retainer Steel Offset Flat ChiselsLength Round Shank

3/4” StockHex Shank3/4” Stock

List Price

Round Shank7/8” Stock


List Price

12”18”

N/A 1202-0121202-018

$14.80$17.85

1102-018 N/A $20.50

Non-Retainer Steel Wide Flat BladeLength Round Shank

3/4” Stock1-1/4” Wide Pt.


1-1/4” Wide Pt.

List Price

Round Shank7/8” Stock2” Wide Pt.

Hex Shank7/8” Stock2” Wide Pt.

List Price

9”12”18”

N/AN/AN/A

1205-009N/A

1205-018

$11.75 N/A

$18.10

1107-0091107-0121107-018

1307-0091307-0121307-018

$15.05$18.20$21.35

Length Weight RSOR HSOR RSRR HSRR Box Qty List PriceBushing Tools 9” 2.50 1482-009 1582-009 1682-009 1782-009 N/A $57.15g

Length Weight RSOR HSOR RSRR HSRR Box Qty List Price1-1/2” Wide Flat Blade 9”

12”18”

N/A 1406-0091406-0121406-018

1506-0091506-0121506-018

1606-0091606-0121606-018

1706-0091706-0121706-018

N/A $14.25$16.40$19.90

Non-Retainer Chipping Hammer Steel

Chipping Hammer Steel

****Ground Rod Drivers available upon request****

Rivet Size

Small Buster Wt. List Price

Jumbo Buster

Wt. List Price

Box Qty

8” Lg Backout Punch 5/8”3/4”7/8”

3276-0143277-0143278-014

1.752.002.50

$28.90$28.90$28.90

3376-0143377-0143378-014

2.002.252.50

$32.75$32.75$32.75

252525

Rivet Size


Jumbo Buster

Wt. List Price

Box Qty


3273-0123274-0123275-012

1.501.752.00

$26.80$26.80$26.80

3373-0123374-0123375-012

1.752.002.25

$31.05$31.05$31.05

252525

Rivet Size


Jumbo Buster

Wt. List Price

Box Qty


3270-0103271-0103272-010

1.501.501.75

$25.30$25.30$25.30

3370-0103371-0103372-010

1.752.002.25

$29.55$29.55$29.55

252525

Rivet Size


Jumbo Buster

Wt. List Price

Box Qty

Std. Backout Punch 3/8”1/2”5/8”3/4”7/8”1”

3260-0093261-0093262-0093263-0093264-009

N/A

1.251.501.501.50

$19.60$19.60$19.60$19.60$19.60

N/A

3360-0093361-0093362-0093363-0093364-0093365-009

1.501.501.751.752.00

$22.75$22.75$22.75$22.75$22.75$22.75

252525252525

Length Small Buster Wt. List Price

Jumbo Buster

Wt. List Price

Box Qty

Ripper Chisels 9”12”

3258-0093258-012

1.502.25

$26.00$28.30

3358-0093358-012

2.002.25

$28.90$32.45

2525


Jumbo Buster

Wt. List Price

Box Qty

Bull / Moil Points 9”12”18”24”36”48”

3211-009C3211-012C3211-018C3211-024C3211-036C

N/A

1.502.003.00

$15.65$19.50$28.80$39.40$55.25

N/A

3311-010C3311-012C3311-018C3311-024C3311-036C3311-048C

2.002.503.75

$18.20$22.15$29.95$40.55$57.90$75.30

252515


Jumbo Buster

Wt. List Price

Box Qty

Flat Chisels 9”12”18”24”36”48”

3201-0093201-0123201-0183201-0243201-0363201-048

1.502.003.00

$15.65$19.50$28.80$39.40$55.25$70.65

3301-0103301-0123301-0183301-0243301-0363301-048

2.002.503.75

$18.20$22.15$29.95$40.55$57.90$75.30

252515

Ripper Chiseels

Rivet Buster Steel

Length Jumbo Buster“Duck Bill”

Wt. List Price

Radius Blade 1-1/8” X 10”1-1/8” X 10”

3301-810 3301-810SPEC

1.852.00

$19.35$23.10

7/8” x 3-1/4” Shank H-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”96”

120”

44-01414H44-01415H44-01416H44-014161H44-01417H44-01418H44-01419H44-01420H44-01421H44-01422H

3.004.005.006.007.009.0011.0014.0018.0022.00

$57.35$62.25$67.20$72.65$78.10$88.55$99.05

$109.55$134.85$160.25

7/8” x 4-1/4” Shank H-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”

44-01450H44-01451H44-01452H44-01455H44-01456H44-01453H44-014531H44-01454H

3.254.255.256.257.259.25

12.0013.25

$58.45$63.35$68.25$73.70$79.20$89.65

$100.15$110.65

1” x 4-1/4” Shank H-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”96”

120”

44-01428H44-01429H44-01430H44-014301H44-01431H44-01432H44-01433H44-01434H44-01435H44-01436H

4.005.007.009.0010.0012.0015.0018.0023.0028.00

$61.75$67.40$73.10$79.35$85.50$96.65

$107.80$118.95$146.50$174.00

H-Thread ExtentionsLength U.C. Part Number Wt. List Price

24”36”48”72”96”

44-01430X44-01431X44-01432X44-01434X44-01435X

7.0010.0012.0018.0023.00

$73.10$85.50$96.65

$118.95$146.50

Couplings and AdaptorsDescription Part Number Wt. List Price

CouplingH to D Adaptor

44-01504H44-01507

0.500.75

$27.30$40.45

7/8” x 3-1/4” Shank E-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”

44-01414E44-01415E44-01416E44-014161E44-01417E44-01418E

N/AN/A

2.753.003.505.005.758.00

$84.90$89.80$94.70

$100.15$105.65$116.15

N/AN/A

1” x 4-1/4” Shank D-ThreadLength U.C. Part Number Wt. List Price

12”18”24”30”36”48”60”72”

44-01428D44-01429D44-01430D

44-01431D44-01432D

44-01434D

4.255.506.50

9.2511.00

15.00

$81.40$87.05$92.70

$105.20$116.35

$138.60

Detachable Bit Hollow Drill Steel

1” Rope Thread Drill SteelLength U.C. Part Number List Price

18” 44-01429RT $145.6024” 44-01430RT $168.0030” 44-014301RT $176.5536” 44-01431RT $185.1148” 44-01432RT $204.7560” 44-01433RT $224.90

11 Degree Tapered Steel, 7/8 x 3-1/4Length U.C. Part Number List Price

12” 44-DS7312 $69.4018” 44-DS7318 $70.9024” 44-DS7324 $79.3030” 44-DS7330 $83.3536” 44-DS7336 $90.9042” 44-DS7342 $97.1548” 44-DS7348 $134.8060” 44-DS7360 $152.25

***Also available in 7/8 x 4-1/4 and 1”***

Bit Diameter

Bit Diameter

Part Number

Wt. Carbide Height

Carbide List Price

Inch MM (MM) Width (MM)

1-3/8” 35 HTI-137H 0.50 14 8 $43.651-1/2” 38 HTI-150H 0.60 14 8 $46.201-5/8” 41 HTI-162H 0.65 14 8 $55.551-3/4” 45 HTI-175H 0.80 14 8 $60.601-7/8” 48 HTI-187H 0.90 14 8 $66.85

2” 51 HTI-200H 1.10 14 8 $72.452-1/4” 57 HTI-225H 1.20 14 8 $81.302-1/2” 64 HTI-250H 1.30 14 9.5 $109.852-3/4” 70 HTI-275H 1.55 20 12 $142.50

3” 76 HTI-300H 2.00 23 12 $148.65

All Steel Threaded Rock BitsE-Thread

Inch MM Part # Wt. List Price

15/16” 24 44-0RB15E 0.12 $13.151” 25 44-0RB16E 0.12 $13.15

1-1/8” 29 44-0RB18E 0.14 $13.401-1/4” 32 44-0RB20E 0.16 $13.40

H - THREAD1-3/8” 35 44-0RB22H 0.44 $9.351-1/2” 38 44-0RB24H 0.46 $9.351-5/8” 41 44-0RB26H 0.56 $9.801-3/4” 45 44-0RB28H 0.60 $12.901-7/8” 48 44-0RB30H 0.82 $14.30

2” 51 44-0RB32H 0.88 $14.302-1/4” 57 44-0RB36H 1.16 $15.702-1/2” 64 44-0RB40H 1.30 $18.352-5/8” 67 44-0RB42H 1.34 $21.30

D - THREAD3-1/2” 89 44-0RB56D 2.90 $22.40

4” 102 44-0RB64D 3.30 $38.75

Threaded Rock Bits

Multi-Use Threaded Carbide Rock Bits

Thread Type Dimension A Dimension B Dimension C Threads/InchDEH

1.180”0.623”0.998”

1-3/4”7/8”

1-3/8”

0.868”0.500”0.711”

566

11 Degree Tapered Rock BitsWe offer a line of Tapered 11 Degree Carbide Bits,

Ballistic Button Bits, and Rope Threaded Bits. Please call us for information and pricing!

Hexagon Shank

Carbide Tipped Hollow Drills

Bit Diameter

Drill Depth

Lgth U.C.

7/8” x 3-1/4” Wt. List Price

7/8” x 4-1/4” Wt. List Price

1” x 4-1/4” Wt. List Price

5/8”

6”9”

15”21”27”

9”12”18”24”30”

44-0303444-0204044-03033

44-03033144-0303311

1.501.752.002.503.00

$107.50 $115.45 $133.55 $144.40$167.50

44-0193444-0193544-0194844-0195044-01960

1.752.002.252.753.25

$108.65 $116.55$134.65$145.50$168.60

3/4”

6”9”

15”21”27”33”45”

9”12”18”24”30”36”48”

44-0121844-0121944-0303744-0122644-01228

44-01228244-012284

1.752.002.503.003.503.754.25

$97.55 $103.30$112.80$113.80$116.50$131.05$160.15

44-01935944-0193644-0193744-0195144-01961

44-01961144-019614

2.002.252.753.253.754.004.50

$98.60 $104.35$113.85$114.90$117.60$132.15$161.30

44-01962144-01962

44-01962244-019623

2.503.003.504.00

$115.60 $ 123.85$ 125.25$ 129.00

7/8”

6”9”

15”21”27”33”45”

9”12”18”24”30”36”48”

44-0099144-0122944-0303844-0099344-01221

44-01221144-012214

2.002.503.003.754.505.006.25

$ 97.65$ 99.20

$109.40$113.95$117.30$131.45$161.05

44-01937144-0193844-0193944-0195244-01949

44-01949144-019493

2.252.753.254.004.755.256.50

$98.70 $100.25$110.55$115.05$118.40$132.60$162.10

44-01962444-01962544-01962644-019627

44-0196271

2.503.254.004.505.50

$ 118.65$ 120.40$ 122.25$ 127.65$ 200.85

1”

9”15”21”27”33”45”

12”18”24”30”36”48”

44-0099444-0303944-0123244-01222

44-01222144-0122211

2.753.504.255.256.007.50

$106.05 $110.85$112.00$120.85$134.95 $164.45

44-0194044-0194144-01942

44-01942144-019422

44-0194221

3.003.754.505.506.257.75

$107.15 $111.95$113.10$121.90$136.05$165.55

44-0197144-0197244-0197644-01977

44-0197711

3.004.005.005.756.25

$130.30 $ 131.60$137.10 $ 145.00$ 176.00

1-1/8”

9”15”21”27”33”45”

12”18”24”30”36”48”

44-0099744-0099844-0122344-01231

44-01231144-0123111

3.004.005.006.006.758.75

$107.55 $110.60$114.15 $117.30$130.95$162.05

44-0194344-0194444-01946

44-01946144-01946244-019464

3.254.255.256.257.009.00

$108.70 $111.65$115.25$118.40$132.00$163.20

44-0197344-0197444-0197844-01979

44-01979144-0197911

3.754.505.506.757.7510.0

$133.90 $ 135.55$141.90 $ 152.70$ 179.05$ 265.70

1-3/16” 15”21”

18”24”

44-0100244-01003

4.005.00

$148.00 $151.50

44-01946544-019466

4.505.25

$149.10 $152.55

1-1/4”

9”15”21”27”33”45”

12”18”24”30”36”48”

44-0099944-0100044-0122444-03041

44-03041144-030413

3.004.005.006.007.008.75

$114.15 $117.30$120.50$123.55$139.35$168.75

44-0195344-0194544-01954

44-01954144-01954244-019544

3.254.255.256.257.259.00

$115.25 $118.40$121.55$124.70$140.45$169.85

44-0198944-0198044-0198144-01982

44-019821144-019822

4.255.506.758.007.5011.5

$ 137.10$ 138.70$ 141.90$ 154.50$ 183.15$ 270.00

1-3/8”

9”15”21”27”45”

12”18”24”30”48”

44-0302544-0302644-0302744-0302844-03029

3.254.005.256.257.50

$110.60 $115.05$116.50$118.10$161.35

44-0195544-0194744-01956

44-01956144-019563

3.504.255.506.509.25

$111.65 $116.15$117.60$119.25$162.35

44-0199044-0198344-0198444-01985

4.255.506.508.00

$132.45 $ 138.60$ 145.00$150.80

1-1/2”

9”15”21”27”45”

12”18”24”30”48”

44-0304344-0304444-0304244-0304544-03046

3.254.255.256.259.00

$127.35 $132.20$137.10$142.05$185.20

44-0195744-0195844-01959

44-01959144-019596

3.504.505.506.509.00

$128.45 $133.30$138.25$143.10$186.25

44-0199144-0198644-0198744-01988

4.005.506.758.00

$137.10 $ 141.10$ 147.45$ 150.50

1-5/8”

9”15”21”

12”18”24”

44-03047244-03044144-030474

3.004.005.50

$163.35 $171.75$180.25

44-03044244-01963

4.255.75

$172.80$181.30 44-019884 7.00 $ 182.90

C9 Shank Non-RotatingChipping Accessories

Part Number Description Lgth. List Price44-0181844-018181644-0181944-018191644-01819244-01820

Moil Pt.Moil Pt.

Chisel 1” BLDChisel 1” BLDChisel 1” BLDChisel 2” BLD

10”16”10”16”24”10”

$21.55$28.90$21.25$28.90$36.75$32.90

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

44-0184044-0184144-0185544-0185644-0184244-0184344-01843144-0184444-0184544-01845844-01846

1/2”1/2”9/16”9/16”5/8”5/8”5/8”3/4”3/4”3/4”7/8”

8”12”8”

12”8”

12”18”8”

12”18”8”

13”16”13”16”13”16”22”13”16”22”13”

0.751.000.751.001.001.252.001.251.502.001.50

$118.20$127.10$118.20$127.10$118.20$127.10$163.65$118.20$127.10$163.65$101.40

U7 Shank Non-RotatingChipping Accessories

Part Number Description Lgth. List Price44-0168044-0168544-01686

Moil Pt.Chisel 1” BLDChisel 2” BLD

10”10”10”

$19.15$19.15$34.90

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

44-0184744-01847144-0184844-0184944-01849144-0185044-0185144-0185244-0185344-0185744-01858

7/8”7/8”1”1”1”

1-1/8”1-1/8”1-1/4”1-1/4”1-1/2”1-3/4”

12”18”8”

12”18”8”

12”8”

12”12”12”

16”22-1/2”

13”16”

22-1/2”13”16”13”16”16”16”

1.752.251.752.252.751.752.252.002.752.753.00

$113.10$151.00$103.65$115.35$124.95$106.05$117.70$115.35$131.00$138.35$142.85

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

44-0315444-0315544-0315644-0315744-0314044-0314144-03157144-03157244-0314244-0314344-03143844-0314444-0314544-03145844-0314644-0314744-03147844-0314844-03149

5/16”3/8”7/16”15/32”1/2”1/2”9/16”9/16”5/8”5/8”5/8”3/4”3/4”3/4”7/8”7/8”7/8”1”1”

8” Solid8” Solid8” Solid8” Solid

8”10-1/2”

8”12”8”

12”18”8”

12”18”8”

12”18”8”

12”

13”13”13”13”13”16”13”17”13”17”23”13”17”23”13”17”23”13”17”

0.750.751.001.000.751.001.001.001.001.251.751.251.502.001.752.253.001.752.50

$81.80$82.70$83.50$84.10$95.60

$106.90$96.35

$106.80$96.65

$107.05$124.30$97.85

$109.25$125.50$99.10

$110.45$126.20$101.20$112.65

Part Number

Bit Dia.

Drill Depth

Overall Lgth.

Wt. List Price

44-03149844-03149744-0315044-0315144-03151844-0315244-0315344-03153844-0316044-0316144-03161844-0316244-0316344-03163144-0316444-0316544-03165144-0316644-03167

1”1”

1-1/8”1-1/8”1-1/8”1-1/4”1-1/4”1-1/4”1-3/8”1-3/8”1-3/8”1-1/2”1-1/2”1-1/2”1-5/8”1-5/8”1-5/8”1-3/4”1-3/4”

18”23”8”

12”18”8”

12”18”8”

12”18”8”

12”18”8”

12”18”8”

12”

23”28”13”17”23”13”17”23”13”17”23”13”17”23”13”17”23”13”17”

3.504.502.002.753.752.252.754.002.253.004.002.253.004.002.503.004.002.503.25

$130.00$177.70$103.50$115.00$130.40$112.65$124.25$132.80$114.95$126.30$141.90$124.30$135.65$144.65$126.30$137.95$175.35$128.65$140.10

C9 Shank Carbide Tipped Hollow Drills (3/4” Round Slotted)

U7 Shank Carbide Tipped Hollow Drills (9/16” x 1-3/4” Hex Shank)

Carbide Tipped Hollow Drills

Seize-Free Carbide Drill BitsPart Number Bit Dia. Drill Depth Shank Size Lgth UC Wt. List Price

44-THB730882244-THB730882744-THB730884044-THB740882244-THB140882244-THB1408827

7/8”

19”24”37”19”19”24”

7/8” x 3-1/4”7/8” x 3-1/4”7/8” x 3-1/4”7/8” x 4-1/4”1” x 4-1/4”1” x 4-1/4”

22”27”40”22”22”27”

3.253.755.253.503.754.25

$179.70$222.30$319.00$180.95$299.60$342.20

Tamco’s patented Seize-Free carbide drill bit combines a unique, spiral fl uted design with increased air fl ow to the carbide tip. This prevents drill binding, the most common problem encountered when drilling through

pavement overlays such as asphalt, concrete and stone.

Carbide Tipped Hollow Drill Fitment ChartManufacturer 7/8” x 3 -1/4” Shank 7/8” x 4 -1/4” Shank 1” x 4 -1/4” Shank C9 Shank U7 ShankAmerican Pneumatic

Atlas CopcoChicago Pneumatic

HarperIngersoll Rand

JetKent

MacDonaldRamitSullairThorTokuUrhu

115, 137, 155

CP14RR, CP22, CP-32A-874108, 4112

RD-15, RD-30, RD-60

MRD-30, MRD-40, MRD-5014D, 15D

THD 1100U/N, TJ-15, TJ-20

4110, 4114

TJ-15, TJ-20, TS-55

137, 155

CP694110, 4114, 4115JH30AC, JH40C3

RD-60RD-619

MRD-40, MRD-50, MRD-5540066B, 40067B

TS-55

109DKR36RCP-9A

MRD-95LHD

DKR-32, DKR-34

4105

RD-7

UT-7, MD-8TH-8

MRD-9(w/hex chuck)

TH800

Tamco Hard Tipped Drill BitsOver 45 years of experience producing quality carbide tipped drills for use with pneumatic drills has resulted in

products which perform the toughest of jobs. Our drill bits perform with huge success in all construction and/or demolition applications.

Tamco carbide tipped drill bits used in rotary percussion hammers will drill hundreds of holes in granite, and a greater quantity in softer stone and concrete.

For best results and a longer tool life, the carbide insert should be sharpened frequently. It is not only easier to grind a small amount of carbide more often, rather than larger amounts of dull carbide less frequently, it also results in a minimal loss of carbide and maximum usable life of the drill bit. It is a good practice to sharpen the carbide insert after drilling 100-200 linear inches. This measure will vary accordingly to the hardness and abrasiveness of the material being drilled. It is important to maintain the original curvature of the carbide along with the 110 degree cutting angle during the sharpening process. Tamco can provide you with a drill guide to check and maintain the proper profi le and cutting angle.

Dull carbide will cut slowly and will require more energy to drill a hole. This extra energy is absorbed by the drill, which can result in fractured carbides, failure of the steel, and/or a failure of the brazing which attaches the carbide into the steel. Dull carbides should be sharpened on a Green Silicone Carbide grinding wheel with a grit size of approximately 80 grit. These wheels are readily available at most industrial suppliers.

Seize-Free Carbide Hollow Drills

Following these procedures will result in faster drilling, more holes drilled per bit, and fewer failures.

Tamco Hard Tipped Drills **For Best Results**

1. DO grind carbide after 50 holes2. DO rotate use of drills3. DO grind to a 110 degree angle4. DO use cut outs as guides5. DO leave slight fl at on the cutting edge

6. DON’T hollow grind7. DON’T put J10 or L27’s in old adapters8. DON’T grind to a knife edge9. DON’T let drill get dull10. DON’T quench in water

Stone Splitting Wedges and ShimsHole Size Length Wedge Part Number List Price Length Shim Part Number List Price

3/8”7/16”1/2”5/8”3/4”7/8”1”

1-1/4”1-3/8” to 1-5/8”1-3/8” to 1-5/8”1-3/8” to 1-5/8”1-3/8” o 1-5/8”1-3/8” to 1-5/8”

2-1/2”2-5/8”2-5/8”2-3/4”

4”5”6”8”12”18”24”36”48”

45-0159445-0156645-0156645-0072745-0073145-0157045-0074045-0156845-0157145-0157245-0157345-0157545-01577

2”2”

2-1/2”

45-0159745-0159745-0073545-0073545-0073945-0158245-0074145-0156945-0158345-0158445-0158545-0158745-01589

$2.10$2.10$1.70$1.70$2.50$2.80$3.35$6.65

$10.00$19.90$24.85$37.20$49.60

**All wedges and shims are sold by the individual piece.**

Alloy WedgesPart Number H W L Wt. List Price

6601-0046602-0066611-0046612-0046621-0066622-0076623-0086631-0086632-0066641-0076642-0066643-0126651-0076661-0086662-0126663-0126671-0106681-0086682-0126683-012

1/4”1/4”3/8”3/8”1/2”1/2”1/2”5/8”5/8”3/4”3/4”3/4”7/8”1”1”1”

1-1/2”2”2”2”

1/2”1/2”3/4”1”

3/4”1”

1-1/2”1-1/4”

2”3/4”1”1”1”1”

1-1/2”3”2”2”2”3”

4”6”4”4”6”7”8”8”6”7”6”

12”7”8”

12”12”10”8”

12”12”

0.250.250.250.250.500.501.001.001.250.500.751.751.001.252.755.005.004.506.75

12.75

$11.90$12.90$13.85$13.90$17.00$17.40$20.70$21.75$24.00$19.10$19.10$25.85$24.90$22.90$53.20$65.40$71.20$66.75

$102.80$106.70

Carbon Right Angle WedgesPart Number H W L Wt. List Price6881-003C6882-006C6883-008C6884-008C6885-008C6886-010C6887-012C6888-012C

1/4”1/2”3/4”1”

1-1/4”1-1/2”1-3/4”

2”

3/4”1”

1-1/2”1-1/2”1-1/4”1-1/2”1-3/4”

2”

3”6”8”8”8”

10”12”12”

0.250.501.001.502.003.005.007.00

$5.80$6.60

$10.45$11.10$13.70$17.95$23.55$32.80

Hand Tools

Alloy Banana WedgePart Number Height Width Length Wt. List Price6696-013UNB6696-813UNB

(With Hole)

13/16”13/16

13/16”13/16

13”13”

1.251.25

$10.40$30.00

Alloy Barrel Drift PinsPart

NumberPin Dia.

Rivet Size

End Center OAL Wt. List Price

6531-0066532-0066533-0076534-0076535-0086536-0086537-0096538-009

7/16”9/16”11/16”13/16”15/16”1-1/16”1-3/16”1-5/16”

3/8”1/2”5/8”3/4”7/8”1”

1-1/8”1-1/4”

1-3/4”2”

2-1/4”2-1/4”2-1/2”2-3/4”

3”3-1/8”

2-1/2”2-1/2”2-1/2”

3”3”3”3”

3-1/4”

6”6-1/2”

7”7-1/2”

8”8-1/2”

9”9-1/2”

0.250.250.500.751.001.502.002.75

$6.55$6.55$6.75$7.20$8.05

$11.30$14.85$16.00

Carbon Barrel Drift PinsPart

NumberPin Dia.

Rivet Size

End Center OAL Wt. List Price

6534-008C6535-008C6536-008C6537-008C

13/16”15/16”1-1/16”1-3/16”

3/4”7/8”1”

1-1/8”

2-1/2”2-1/2”2-1/2”2-1/2”

3”3”3”3”

8”8”8”8”

0.751.001.501.75

$6.55$6.85$8.35

$12.85

Sheeters ChiselPart Number Style Blade

WidthBody Stock

Length List Price

5952-008 Std. 1-3/4” 5/8” 8” $9.605907-008 Heavy Duty 2” 3/4” 8” $11.45

Flat ChiselPart Number Body Stock Length List Price

5401-0083/4”

8” $12.255401-010 10” $13.205401-012 12” $14.105501-008

7/8”8” $12.80

5501-010 10” $13.455501-012 12” $14.055601-008

1”8” $14.65

5601-012 12” $16.10

Hand Tools

Pinch Bars

Part Number Stk. Size OAL List Price7001-0187001-024 1/2” 18”

24”$13.50$17.05

7002-0187002-024 5/8” 18”

24”$14.85$19.25

7003-0187003-0247003-0367003-048

3/4”

18”24”36”48”

$16.10$21.75$27.85$35.85

7004-0367004-0487004-060

7/8”36”48”60”

$31.85$42.10$53.25

7005-0367005-0487005-0607005-072

1”

36”48”60”72”

$40.55$54.80$69.20$83.60

Lining Bars

Part Number Stk. Size OAL List Price7202-036 5/8” 36” $27.457203-0247203-036 3/4” 24”

36”$21.75$27.85

7204-0247204-060 7/8” 24”

60”$21.85$53.25

7205-0487205-0607205-072

1”48”60”72”

$54.80$69.20$83.60

Nickle Chrome Plated Pinch Bars

Part Number Stk. Size OAL List Price7004-030NCP 7/8” 30” $44.35

Needle Bars

Part Number Stk. Size OAL List Price7503-060 3/4” 60” $45.057504-0487504-060 7/8” 48”

60”$41.15$52.15

7505-0607505-072 1” 60”

72”$72.90$85.95

Gooseneck Bars

Part Number Stk. Size OAL List Price7603-036 3/4” 36” $27.857605-0487605-072 1” 48”

72”$54.80$83.60

Chisel Bars

Part Number Stk. Size OAL List Price7404-0367404-0607404-072

7/8”36”60”72”

$28.10$47.00$56.65

7405-060 1” 60” $64.65

Maintenance Bars

Tamco Double Faced SledgesPart

NumberToolSize

EyeSize

Handle Length

Wt.Each

ListPrice

A.R.E.A. Plan 13-83Alloy Steel Grade B

BT-10201HT-10201ST-10201

1# 5/8” x 7/8”N/A15”12”

1#1-1/2#1-3/4#

$28.04$38.90$45.31

BT-10251HT-10251ST-10251

1-1/2# 5/8” x 7/8”N/A15”12”

1-1/2#2#

2-1/4#

$32.24$43.10$49.51

BT-10202HT-10202ST-10202

2# 3/4” x 1”N/A16”14”

2#2-1/2#2-3/4#

$39.43$50.30$59.69

BT-10252HT-10252ST-10252

2-1/2# 3/4” x 1”N/A16”14”

2-1/2#3#

3-1/4#

$45.99$56.86$66.26

BT-10203HT-10203ST-10203

3# 3/4” x 1”N/A16”14”

3#3-1/2#3-3/4#

$50.40$61.27$70.67

BT-10204HT-10204ST-10204

4# 3/4” x 1”N/A16”14”

4#4-1/2#4-3/4#

$54.18$65.05$74.50

BT-10206HT-10206ST-10206

6# 1” x 1-3/8”N/A36”34”

6#6-1/2#6-3/4#

$58.80$73.08$89.09

BT-10208HT-10208ST-10208

8# 1” x 1-3/8”N/A36”34”

8#8-1/2#8-3/4#

$74.18$88.46

$104.48BT-10210PHT-10210ST-10210

10# 1” x 1-3/8”N/A36”34”

10#10-1/2#10-3/4#

$90.62$104.90$120.91

BT-10212HT-10212ST-10212

12# 1” x 1-3/8”N/A36”34”

12#12-1/2#12-3/4#

$104.74$119.02$134.98

BT-10216HT-10216ST-10216

16# 1” x 1-3/8”N/A36”34”

16#16-1/2#16-3/4#

$149.73$164.01$179.97

BT - Tool Head OnlyHT - Head w/Wooden HandleST - Head w/STM Handle

BT-10220HT-10220ST-10220

20# 1-1/4” x 1-1/2”N/A36”34”

20#20-1/2#20-3/4#

$180.29$195.51$210.53

5# Builder’s AdzePart Number Eye Size Handle Lgth Wt. Each List Price

BT - Tool Head OnlyHT - Head w/Wooden Handle

BT-82003HT-82003

N/A $76.45$104.42

Handled Tools

Tamco Handled Back-Out PunchesPart

NumberPunch

Dia.Punch Lgth.

OAL EyeSize

HandleLgth.

Wt.Each

ListPrice

Alloy Steel Grade B BT-10106HT-10106ST-10106

3/8” 2-1/2” 7-1/4” 3/4” x 1”N/A16”14”

1#1-1/2#1-3/4#

$52.13$63.00$72.45

BT-10108HT-10108ST-10108

1/2” 2-1/2” 7-1/2” 3/4” x 1”N/A16”14”

1-3/4#2-1/4#2-1/2#

$52.13$63.00$72.45

BT-10110HT-10110ST-10110

5/8” 2-3/4” 7-3/4” 3/4” x 1”N/A16”14”

2#2-1/2#2-3/4#

$55.34$66.20$75.65

BT-10112HT-10112ST-10112

3/4” 3” 8” 3/4” x 1”N/A16”14”

2-1/2#3#3-1/4#

$57.91$68.72$78.17

BT-10114HT-10114ST-10114

7/8” 3” 8-1/4” 3/4” x 1”N/A16”14”

3#3-1/2#3-3/4#

$63.16$74.03$83.48

BT - Tool Head OnlyHT - Head w/Wooden HandleST - Head w/STM Handle

BT-10116HT-10116ST-10116 1” 3-1/2” 8-1/2” 3/4” x 1”

N/A16”14”

3-1/2#4#4-1/4#

$66.78$77.60$87.05

Saf-T-Mate Replacement HandlesPart Number Fits Eye Size Length List Price

STM-3400STM-2000STM-1400STM-1200STM-1000STM-0800EPK-0100

1” x 1-3/8”1-1/4” x 1-1/2”

3/4” x 1”5/8” x 7/8”

24-32 Oz. Machinists Handle16-20 Oz. Machinists Handle

Epoxy Kit

34”34”14”12”14”13”N/A

$26.72$26.72$16.75$13.70$15.02$13.39$8.82

Wooden Replacement HandlesPart Number Fits Eye Size Length List Price

WH-10001WH-10002WH-10003WH-10004WH-10005WH-10006WH-10007WH-10009WH-82003

5/8” x 7/8”3/4” x 1”

3/4” x 1-3/8”3/4” x 1-3/8”1” x 1-3/8”

1-1/2” x 1-3/8”#6 Pick3/4” x 1”#5 Adze

16”16”24”36”36”36”36”36”36”

$8.98$8.98

$11.08$12.39$12.39$13.39$15.23$12.39$26.04

Handled Tools

35

Ajax Tamco Ajax Tamco Ajax Tamco Ajax Tamco Ajax Tamco Ajax Tamco 221 3201-009 315-24 1411-024 408-48 1701-048 12300 4021-018 60470 44-01949 64090 44-01421H221-12 3201-012 315-36 1411-036 408-60 1701-060 39500 4103-016 60490 44-01940 64100 44-01422H221-18 3201-018 315-48 1411-048 408-72 1701-072 39501 4103-916 60500 44-01941 64210 44-01450H223 3260-009 315-60 1411-060 409 1611-009 40010 4134-009 60510 44-01942 64220 44-01451H224 3261-009 316 1511-012 410 1711-009 41080 4074-018 60520 44-019421 64230 44-01452H225 3262-009 316-18 1511-018 411 1611-012 41100 4004-014 60530 44-01943 64240 44-01455H226 3263-009 316-24 1511-024 411-18 1611-018 41130 4044-016 60540 44-01944 64250 44-01456H227 3264-009 316-36 1511-036 411-24 1611-024 41200 4014-014 60550 44-01946 64260 44-01453H231 3270-010 316-48 1511-048 411-36 1611-036 41300 4024-014 60560 44-019461 64270 44-014531H232 3273-012 316-60 1511-060 412 1711-012 41700 4097-014 60570 44-01953 64280 44-01454H233 3276-014 323 1407-009 412-18 1711-017 41701 4164-909 60580 44-01945 64410 44-01428H234 3271-010 323-12 1407-012 412-24 1711-024 41734 4164-709 60590 44-01954 64420 44-01429H235 3274-012 323-12-3 1442-012 412-36 1711-036 41758 4164-609 60600 44-019541 64430 44-01430H236 3277-014 323-18 1407-018 423 1607-009 42100 4004-018 60610 44-01955 64440 44-014301H237 3272-010 323-24 1407-024 423-12 1607-012 42200 4014-018 60620 44-01947 64450 44-01431H238 3275-010 323-36 1407-036 423-12-3 1642-012 42300 4024-018 60630 44-01956 64460 44-01432H239 3278-014 323-48 1407-048 423-18 1607-018 48400 4064-012 60640 44-019561 64470 44-01433H241 3258-009 323-60 1407-060 423-24 1607-024 49500 4104-016 60650 44-01957 64480 44-01434H245 3211-009 324 1507-009 423-36 1607-036 49501 4104-916 60660 44-01958 64490 44-01435H246 3211-012 324-12 1507-012 423-48 1607-048 50100 1482-009 60670 44-01959 64500 44-01436H246-18 3211-018 324-12-3 1542-012 423-60 1607-060 50200 1582-009 60680 44-019591 B & L Tamco 276 3301-010 324-18 1507-018 423-72 1607-072 50300 1682-009 60880 44-01973 A01014 4011-014X276-12 3301-012 324-24 1507-024 424 1707-009 50400 1782-009 60890 44-01974 A01018 4011-018X276-18 3301-018 324-36 1507-036 424-12 1707-012 60010 44-03034 60900 44-01978 A02014 4001-014X276-24 3301-024 324-48 1507-048 424-12-3 1742-012 60020 44-02040 60910 44-01979 A02018 4001-018X278 3360-009 324-60 1507-060 424 1707-009 60030 44-03033 60920 44-01989 A03014 4021-014X279 3361-009 380 2007-007 424-12 1707-012 60040 44-01218 60930 44-01980 A03018 4021-018X280 3362-009 382 2053-007 424-12-3 1742-012 60050 44-01219 60940 44-01981 A11014 4011-014281 3363-009 382-12 2053-012 424-18 1707-018 60060 44-03037 60950 44-01982 A11018 4011-018282 3364-009 382-18 2053-018 424-24 1707-024 60070 44-01226 60960 44-01990 A12014 4001-014283 3365-009 383 2051-007 424-36 1707-036 60080 44-01228 60970 44-01983 A12018 4001-018284 3366-009 383-12 2051-012 424-48 1707-048 60090 44-00991 60980 44-01984 A13014 4021-014285 3370-010 383-18 2051-018 424-60 1707-060 60100 44-01229 60990 44-01985 A13018 4021-018286 3373-012 384 2054-007 424-72 1707-072 60110 44-03038 61000 44-01991 A14014 4011-014H287 3376-014 384-12 2054-012 503 5201-006 60120 44-00993 61010 44-01986 A14018 4011-018H288 3371-010 384-18 2054-018 506 5401-008 60130 44-01221 61020 44-01987 A15014 4001-014H289 3374-012 390 1807-007 507 5401-010 60140 44-01230 61030 44-01988 A15018 4001-018H290 3377-014 392 1853-007 508 5401-012 60150 44-00994 62005 44-03140 A16014 4021-014H291 3372-010 392-12 1853-012 510 5501-009 60160 44-03039 62010 44-01342 A16018 4021-018H292 3375-012 392-18 1853-018 511 5501-012 60170 44-01232 62020 44-01343 A21014 4012-014293 3378-014 393 1851-007 513 5601-006 60180 44-01222 62030 44-031438 A21018 4012-018295 3358-009 393-12 1851-012 611 6531-006 60190 44-00997 62040 44-03144 A22014 4002-014295-12 3358-012 393-18 1851-018 612 6532-006 60200 44-00998 62050 44-03145 A22018 4002-018296 3311-009 394 1854-007 613 6533-007 60210 44-01223 62060 44-031458 A23014 4022-014296-12 3311-012 394-12 1854-012 633 6533-007 60220 44-01231 62070 44-03146 A23018 4022-018296-18 3311-018 394-18 1854-018 634 6534-007 60230 44-00999 62080 44-03147 A24014 4012-014H296-24 3311-024 396 2153-007 635 6535-008 60240 44-01000 62090 44-031478 A24018 4012-018H297 3311-012 396-12 2153-012 636 6536-008 60250 44-01224 62100 44-03148 A25014 4002-014H297-18 3311-018 396-18 2153-018 660 7603-036 60260 44-03041 62110 44-03149 A25018 4002-018H303 1401-009 397 2151-007 687 7605-048 60270 44-03025 62120 44-031498 A26014 4022-014H303-12 1401-012 397-12 2151-012 691 6698-010 60280 44-03026 62130 44-031497 A26018 4022-018H303-18 1401-018 397-18 2151-018 876 6696-013 60290 44-03027 63220 HTI-137H A31014 4013-014303-24 1401-024 398 2154-007 882 6882-006C 60300 44-03028 63230 HTI-150H A31018 4013-018303-36 1401-036 398-12 2154-012 884 6884-008C 60310 44-03043 63240 HTI-162H A32014 4003-014303-48 1401-048 398-18 2154-018 886 6886-010C 60320 44-03044 63250 HTI-175H A32018 4003-018303-60 1401-060 399 2107-007 888 6888-012C 60330 44-03042 63260 HTI-187H A33014 4023-014303-72 1401-072 405 1601-009 905 2205-006 60340 44-03045 63270 HTI-200H A33014 4023-014304 1501-009 406 1701-009 910 2253-006 60350 44-01934 63280 HTI-225H A33018 4023-018304-12 1501-012 407 1601-012 910-1/2 2201-007 60360 44-01935 63290 HTI-250H A34014 4013-014H304-18 1501-018 407-18 1601-018 910-11 2253-012 60370 44-01948 63300 HTI-275H A34018 4013-018H304-24 1501-024 407-24 1601-024 910-18 2253-018 60380 44-01950 63310 HTI-300H A35014 4003-014H304-36 1501-036 407-36 1601-036 912 2203-006 60390 44-01936 64010 44-01414H A35018 4003-018H304-48 1501-048 407-48 1601-048 922 2254-007 60400 44-01937 64020 44-01415H A36018 4023-018H304-60 1501-060 407-60 1601-060 940 2211-007 60410 44-01951 64030 44-01416H A41014 4014-014304-72 1501-072 407-72 1601-072 11100 4001-014 60420 44-01961 64040 44-014161H A41018 4014-018313 1411-009 408 1701-012 11200 4011-014 60430 44-019371 64050 44-01417H A41024 4014-024314 1511-009 408-18 1701-018 11300 4021-014 60440 44-01938 64060 44-01418H A42014 4004-014315 1411-012 408-24 1701-024 12100 4001-018 60450 44-01939 64070 44-01419H A42018 4004-018315-18 1411-018 408-36 1701-036 12200 4011-018 60460 44-01952 64080 44-01420H A42024 4004-024

Steel Cross Reference

009 316 24 1511 024 411 18 1611 018 41130 4044 016 660540 44 01944 64250-009 316-36 1511-036 411411-24-24 1611-002424 4124120000 4014014-04 14 605605505 44-01946 64260-010 316-48 1511-048 4411-36 1611-036 41300 4024-014 605660 44-019461 64270-012 316-60 1511-060 412 1711711-012 41700 404097-001414 60570 44-01953 64280-014 323 1407-009 412-18 1711-00171 41701 4164-909 60580 44-01945 64410-010 323-12 1407-012 412-24 1711-0244 41734 4164-709 60590 44-01954 64420-012 323-12-3 1442-012 412-36 1711-0336 41758 4164164-609 60600 44-019541 64430-014 323-18 1407-018 423 1607-0009 42100 4004-04 18 60610 44-01955 64440-010 323-24 1407-024 423-12 1607-012 42200 4014-04-018 60620 44-01947 64450-010 323-36 1407-036 423-12-3 1642-012 42300 402024-04 1818 60630 44-01956 64460-014 323-48 1407-048 423-18 161607-018 48400 4064064-04-012 60640 44-019561 64470-009 323-60 1407-060 4233-24-24 1607-024 49500 4104-016 6060650 44-01957 64480-009 324 1507-0099 423-36 1601607-07 36 49501 4104104-94 16 606600 44-01958 64490-012 324-12 1507-07-012 423-4848 16077-048 50100 1482-00909 6066 70 44-01959 64500-018 324-12-3 1541542-012 42423-60 16077-060 50200 1582-009 6060680 44-4-0190 591 B & L-010 324-18 1507-001818 423-72 1607-072 50300 1682-009 608880 44-0101973 A01014-012 324-24 15007-7-024 424 1707-009 50400 1782-009 608990 44-0199747 A01018-018 324-366 151507-036 424-12 1707--012 60010 44-03034 609000 4444-019788 A02014-024 324-4-48 1507-048 424-12-3 1742--012 60020 44-02040 609910 44-0101979 A02A 018-009 32424-60 1507-060 424 1707-0009 60030 44-44-03003 333 60609200 44-019989 A003014-009 38380 2007-007 424-12 1707-0-012 60040 44-4 01218 60909330 44-0198080 A0330180-009 382 2053-007 424-12-3 1742-0112 60050 44-01219 60940 44-01981 A1101014-009 382-112 2053-012 424-18 1707-018 600600 44-03037 60950 44-01982 A11A 0188-0099 3822-18 2053-018 424-24 1707-024 600700 44-01226 60960 44-01990 AA120144-0009 3833 2052051 01-00707 424424 36-36 1701707 07-03636 600800 4444-0120122828 6096097070 4444-0190198383 A1A12018-00009 383-12 2051-012 424-48 1707-048 60090 44-00991 60980 44-01984 A13014-0010 3833-18 2051--018 4424-600 17707-0600 601000 44-4-001229 6099090 44-01985 A13A 018-0012 3844 20520544-007 4244-72- 17707-0072 601110 444-03003838 61061000 4444-0190199191 AA14014--014 384-12 2054-0122 50503 52201-00006 60160120 444-000993 61010 44-019866 A14018-010 384-18 2054-00118 506 54401-00088 6013030 444-01222121 61061020 44-44-0190198787 AA15014-012 390 1807-7-007 507 54401-0010 6011440 44-4-0120 30 6103030 44-01988 AA15018-0- 14 392 1853-007 508 5401-012 60150 44-00994 62005 44-03140 A16014-0010 392-12 185853 03-01212 51051 5505501-01 0909 6016016060 44-44-03039 620201010 44-01342 A16018-0012 392-18 1853-00188 511 555011-0112 6601700 44--01232 6202020 444-01343 A21014-0014 393 1851-00077 513 556011-0006 60180 44--01222 620203030 444-031438 A21018-0009 393-12 1851-00122 611 653311-00606 60190 44-00997 622040 444-03144 A22014-0122 393-18 1851-018 612 6532-006 60200 44-00998 62050 44-03145 A22018-0099 394 1851854-04 00707 613613 6536533-03 00707 602100 44-44 0120122323 6206206060 44-44 031031458458 A23A 0144-012 394-122 1854-012 633 6533-007 602220 44-01231 62070 44-03146 A230118-018 3943 -188 1854-018 634 6534-007 602330 44-00999 62080 44-031477 A240014-024 3996 2153-007 635 6535-008 602440 44-01000 62090 44-03147478 A2424018-012 3966-12- 2153-012 636 6536-008 602550 44-01224 62100 44-0303148 A2A25014-018 396-1818 2152 3-018 660 7603-036 602660 44-03041 62110 44-4-003149 A25018-009 397 215151-007 687 7605-048 602700 44-03025 62120 4444-03149898 A26014-012 397-12 2151-0-012 691 6698-010 602800 44-03026 62130 44-03114497 A26018-018 397-18 2152 1-0188 876 6696-013 602900 44-03027 632200 HTITI-137H A31014-024 398 21554-04 07 88282 6882-006C 603000 44-03028 63263230 HHTI-150H A31018-036 398-12 2154-001212 884 6884-008C 603100 44-0300304343 63240 HTI-162H A32014-048 398-18 2154-018 886886 6886-0010C10C 603200 44-03044 63232550 HTI-175H A32018-060 399 2107-007 888 6888-012C 60330 44-030304242 63260 HTI-187H A33014-072 405 1601-009 905 22005 05-00606 6036034040 444-03045 63270 HTI-200H A33014

36

B & L Tamco B & L Tamco B & L Tamco B & L Tamco B & L Tamco B & L Tamco A43014 4024-014 E11012H 44-01414H L02J60 1411-060 LD1012A 44-ORB64D X31425 44-01941 X90422 44-031478A43018 4024-018 E11018E 44-01415E L02J72 1411-072 LD892AH 44-ORB56D X31428 44-01944 X90425 44-031498A43024 4024-024 E11018H 44-01415H L03F09 1701-009 LE23 44-ORB15E X31432 44-01945 X90428 44-031518A44014 4014-014H E11024E 44-01416E L03F12 1701-012 LE26 44-ORB16E X31435 44-01947 X90432 44-031538A44018 4014-018H E11024H 44-01416H L03F18 1701-018 LE27 44-ORB18E X31438 44-01958 X90435 44-031618A45014 4004-014H E11030E 44-014161E L03F24 1701-024 LE32 44-ORB20E X31616 44-01950 X90438 44-031631A45018 4004-018H E11030H 44-014161H L03F36 1701-036 LH35SH 44-ORB22H X31619 44-01951 X90625 44-031497A46014 4024-014H E11036E 44-01417E L03F48 1701-048 LH38SH 44-ORB24H X31622 44-01952 Chi Pneu Tamco A46018 4024-018H E11036H 44-01417H L03F60 1701-060 LH41SH 44-ORB26H X31625 44-01942 8542 2201-007A90008 4043-016 E11048E 44-01418E L03F72 1701-072 LH44SH 44-ORB28H X31628 44-01946 8572 2301-007A90009 4044-016 E11048H 44-01418H L03G09 1501-009 LH47SH 44-ORB30H X31632 44-01954 41644 1407-009B00300 4111-016X E11060H 44-01419H L03G12 1501-012 LH50SH 44-ORB32H X31635 44-01956 46072 2205-007B00500 4061-012X E11072H 44-01420H L03G18 1501-018 LH57SH 44-ORB36H X31638 44-01959 46073 2201-007B10200 4111-916 E11096H 44-01421H L03G24 1501-024 LH63SH 44-ORB40H X31819 44-01961 46080 2201-018B10300 4111-016 E11120H 44-01422H L03G36 1501-036 LH66SH 44-ORB42H X31822 44-01949 49969 1401-018B10500 4061-012 E12012H 44-01450H L03G48 1501-048 T1207MO HTI-137H X31825 44-019421 50411 1501-024B10600 4071-016 E12018H 44-01451H L03G60 1501-060 T1507MO HTI-150H X31828 44-019461 51064 2205-006B10700 4081-017 E12024H 44-01452H L03G72 1501-072 T1607MO HTI-162H X31832 44-019541 52043 1507-012B11100 4131-012 E12030H 44-01455H L03H09 1601-009 T1707MO HTI-175H X31835 44-019561 54013 1401-036B11100 4131-012 E12036H 44-01456H L03H12 1601-012 T1907MO HTI-187H X31838 44-019591 56148 1411-018B11300 4121-016 E12048H 44-01453H L03H18 1601-018 T2007MO HTI-200H X32129 44-019359 59229 1401-018B20200 4102-916 E12060H 44-014531H L03H24 1601-024 T2207MO HTI-225H X32319 44-019621 71005 3301-009B20300 4102-016 E12072H 44-01454H L03H36 1601-036 T2507MO HTI-250H X32322 44-019624 71007 3362-009B20500 4062-012 E23012D 44-01428D L03H48 1601-048 T2507MO HTI-300H X32325 44-01971 71008 3363-009B20600 4072-016 E23012H 44-01428H L03H60 1601-060 X30216 44-03034 X32328 44-01973 71009 3364-009B20700 4082-017 E23018D 44-01429D L03H72 1601-072 X30219 44-01218 X32332 44-01989 71010 3358-009B21100 4132-009 E23018H 44-01429H L03J09 1401-009 X30222 44-00991 X32335 44-01990 71011 3311-012B21200 44-00308L E23024D 44-01430D L03J12 1401-012 X30225 44-01230 X32338 44-01991 71202 3201-009B22783 4162-609 E23024H 44-01430H L03J18 1401-018 X30316 44-02040 X32419 44-01962 71204 3262-009B22785 4162-709 E23030H 44-014301H L03J24 1401-024 X30319 44-01219 X32422 44-019625 71205 3263-009B22787 4162-809 E23036D 44-01431D L03J36 1401-036 X30322 44-01229 X32425 44-01972 71206 3264-009B22789 4162-909 E23036H 44-01431H L03J48 1401-048 X30325 44-00994 X32428 44-01974 71207 3258-009B30200 4103-916 E23048D 44-01432D L03J60 1401-060 X30325 44-00994 X32432 44-01980 71587 3361-009B30300 4103-016 E23048H 44-01432H L03J72 1401-072 X30328 44-00997 X32435 44-01983 72209 3261-009B30500 4063-012 E23060H 44-01433H L07F00 1782-009 X30328 44-00997 X32438 44-01986 72216 3365-009B30600 4073-018 E23072D 44-01434D L07G00 1582-009 X30332 44-00999 X32619 44-019622 72217 3265-009B30700 4083-017 E23072H 44-01434H L07H00 1682-009 X30335 44-03025 X32622 44-019626 73225 2153-007B30800 4096-014 E23096H 44-01435H L07J00 1482-009 X30338 44-03043 X32625 44-01976 82291 2201-007B31100 4133-009 E23120H 44-01436H L11F09 1707-009 X30416 44-03033 X32628 44-01978 84175 2151-009B31200 44-00309L L02F09 1711-009 L11F12 1707-012 X30419 44-03037 X32632 44-01981 84176 2151-012B32000 4093-014 L02F12 1711-012 L11F18 1707-018 X30422 44-03038 X32635 44-01984 87376 2154-007B32783 4163-609 L02F18 1711-018 L11F24 1707-024 X30425 44-03039 X32638 44-01987 92294 1401-009B32785 4163-709 L02F24 1711-024 L11G09 1507-009 X30425 44-03039 X32819 44-019623 92295 1401-012B32787 4163-809 L02F36 1711-036 L11G12 1507-012 X30428 44-00998 X32822 44-019627 92298 1501-009B32789 4163-909 L02F48 1711-048 L11G18 1507-018 X30428 44-00998 X32825 44-01977 92299 1501-012B34006 44-01910 L02F60 1711-060 L11G24 1507-024 X30432 44-01000 X32828 44-01979 92848 3311-009B40200 4104-916 L02F72 1711-072 L11H09 1607-009 X30435 44-03026 X32835 44-01985 92882 1411-009B40300 4104-016 L02G09 1511-009 L11H12 1607-012 X30438 44-03044 X32838 44-01988 92883 1411-012B40500 4064-012 L02G12 1511-012 L11H18 1607-018 X30616 44-030331 X32932 44-01982 95775 3301-012B40600 4074-018 L02G18 1511-018 L11H24 1607-024 X30619 44-01226 X90116 44-03142 98851 1511-009B40600 4084-017 L02G24 1511-024 L11J09 1407-009 X30622 44-00993 X90119 44-03144 123996 1853-007B40800 4097-014 L02G36 1511-036 L11J12 1407-012 X30825 44-01222 X90122 44-03146 123998 1851-007B41100 4134-009 L02G48 1511-048 L11J18 1407-018 X30828 44-01231 X90125 44-03148 123999 1854-007B41200 44-00310L L02G60 1511-060 L11J24 1407-024 X30832 44-03041 X90128 44-03150 829150 2153-007B42100 4094-014 L02G72 1511-072 L14J09 1442-012 X30835 44-03028 X90132 44-03152 829165 2151-007B42783 4164-609 L02H09 1611-009 L21A09 3211-009C X30838 44-03045 X90135 44-03160 829310 2154-007B42785 4164-709 L02H12 1611-012 L21A12 3211-012C X31216 44-01934 X90138 44-03162 837201 2201-007B42787 4164-809 L02H18 1611-018 L21A18 3211-018C X31222 44-019371 X90212 44-03140 837203 2205-006B42789 4164-909 L02H24 1611-024 L21B10 3311-009 X31316 44-01935 X90312 44-03141 839008 1501-009B44006 44-01911 L02H36 1611-036 L21B12 3311-012 X31319 44-01936 X90316 44-03143 839009 1501-012B91502 44-01363 L02H48 1611-048 L21B18 3311-018 X31322 44-01938 X90319 44-03145 839010 1501-018B91503 44-01364 L02H60 1611-060 L21B24 3311-024 X31325 44-01940 X90322 44-03147 839011 3258-009B91606 44-01360 L02H72 1611-072 L22A09 3201-009 X31328 44-01943 X90325 44-03149 839013 3211-009B91607 44-01352 L02J09 1411-009 L22A12 3201-012 X31332 44-01953 X90328 44-03151 839014 1401-009B91608 44-01362 L02J12 1411-012 L22A18 3201-018 X31335 44-01955 X90332 44-03153 839018 1511-009B92300 44-00294 L02J18 1411-018 L22B10 3301-010 X31338 44-01957 X90335 44-03161 839019 3201-009CBH0000 44-01507 L02J24 1411-024 L22B12 3301-012 X31416 44-01948 X90338 44-03163 839023 1411-009CCH0000 44-01504H L02J36 1411-036 L22B18 3301-018 X31419 44-01937 X90416 44-031438 839024 3203-009E11012E 44-01414E L02J48 1411-048 L22B24 3301-024 X31422 44-01939 X90419 44-031458 839038 3261-009


37

Chi Pneu Tamco I.R. Tamco I.R. Tamco I.R. Tamco I.R. Tamco I.R. Tamco 839042 3263-009 22040943 44-00308 50050392 4012-024 50712975 44-01454H 9001-295-9 1/2 3358-009 H3R-423-60 1607-060839045 1401-018 22040968 4071-016 50050475 4013-014 50713023 44-01428H 9001-297-12 3311-012C H3R-423-72 1607-072839047 3265-009 22040976 4072-016 50055524 4013-018 50713031 44-01429H 9001-297-18 3311-018C H3R-423-84 1607-084839050 1854-007 22040984 4073-018 50055540 4013-024 50713049 44-01431H 9001-297-24 3311-024C H3R-423-9 1607-009839051 1853-007 22041008 44-00309 50055565 4013-036 50713056 44-01433H 9001-297-36 3311-036C H3R-423-96 1607-096839083 1401-012 22041016 44-00310 50055573 4013-048 51233690 44-01452H 9001-297-9 3311-009C H3R-424-12 1707-012839084 1511-012 45509932 4004-120 50055581 4013-060 51234052 44-01456H BT41310 4131-012 H3R-424-18 1707-018839098 2301-007 45509940 4004-144 50055599 4013-072 51234060 44-01453H BT41320 4132-009 H3R-424-24 1707-024839190 1411-012 45509957 4004-168 50055680 4014-014 51242006 44-01450H BT41330 4133-009 H3R-424-36 1707-036839334 1854-018 45509965 4004-084 50055698 4014-018 51242014 44-01451H BT41340 4134-009 H3R-424-48 1707-048839335 1853-018 45509973 4004-096 50055714 4014-024 51242030 44-01455H CB40960 4096-014 H3R-424-60 1707-060839341 1853-012 45510211 4002-120 50055730 4014-036 51242063 44-014531H CB40970 4097-014 H3R-424-72 1707-072839467 1851-007 45510229 4002-144 50055748 4014-048 51248300 HTI-150H CP2107-07 2107-007 H3R-424-84 1707-08471208-10 3211-009 45510237 4002-168 50055755 4014-060 51248318 HTI-162H CP2107-12 2107-012 H3R-424-9 1707-00971208-12 3211-012 45510245 4002-024 50114883 4023-014 51248326 HTI-175H CP2107-18 2107-018 H3R-424-96 1707-096R-004938 4014-014 45510252 4002-036 50185982 4063-012 51248334 HTI-187H CP2142-07 2142-007 HH1-214F-12 1501-012R-004949 4013-014 45510260 4002-048 50185990 4064-012 51248342 HTI-200H CP2142-12 2142-012 HH1-214F-18 1501-018R-005738 4074-018 45510278 4002-060 50186014 4074-018 51248359 44-0RB22H CP-2151-07 2151-007 HH1-214F-24 1501-024R-005739 4073-018 45510286 4002-072 50187830 44-00308L 51248367 44-0RB24H CP-2151-12 2151-012 HH1-214F-36 1501-036R-005752 4023-014 45510294 4002-084 50187848 44-0309L 51248375 44-0RB26H CP-2151-18 2151-018 HH1-214F-48 1501-048R-005753 4024-014 45510302 4002-096 50187855 44-00310L 51248383 44-0RB28H CP-2153-07 2153-007 HH1-214F-60 1501-060R-056233 4024-018 45510369 4003-120 50187897 44-01362 51248391 44-0RB30H CP-2153-12 2153-012 HH1-214F-72 1501-072R-070115 4012-014 45510377 4003-144 50189554 4102-016 51248409 44-0RB32H CP-2153-18 2153-018 HH1-214F-84 1501-084R-070116 4102-016 45510385 4003-084 50189562 4103-016 51293017 HTI-250H CP-2154-07 2154-007 HH1-214F-9 1501-009R-070118 4022-014 45510393 4003-096 50189570 4104-016 51298107 4003-036 CP-2154-12 2154-012 HH1-214F-96 1501-096R-070119 4072-016 45510401 4003-120 50189596 4111-016 51299048 4004-060 CP-2154-18 2154-018 HH1-214M-12 1511-012R-070131 4002-014 45510476 4022-060 50190404 4062-012 51299477 4004-036 FW40810 4081-017 HH1-214M-18 1511-018R-076398 4064-012 45510484 4024-036 50191790 4024-072 51299485 4004-048 FW40820 4082-017 HH1-214M-24 1511-024R-076399 4063-012 45510492 4024-060 50193747 4023-024 51299493 4004-072 FW40830 4083-017 HH1-214M-36 1511-036R-085363 4002-024 45510500 4023-036 50193754 4023-018 51304574 4022-072 FW40840 4084-017 HH1-214M-9 1511-009R-085364 4002-036 45510518 4023-048 50193879 4024-014 51305639 44-014161H H3R-214F-12 1701-012 HH1-214S-12 1542-012R-085446 4003-014 45510526 4023-060 50193887 4024-018 51305704 44-014301H H3R-214F-18 1701-018 HH1-214T-9 1582-009R-085447 4003-018 45510534 4023-072 50193903 4024-024 51305860 4011-036 H3R-214F-24 1701-024 HH1-215F-12 1401-012R-085448 4004-014 45510542 4021-024 50193937 4024-048 51307155 HTI-137H H3R-214F-36 1701-036 HH1-215F-18 1401-018R-085449 4004-018 45510559 4021-036 50195288 4021-014 51356723 HTI-225H H3R-214F-48 1701-048 HH1-215F-24 1401-024R-085501 4002-018 45510567 4021-048 50195296 4021-018 2204-0612 4063-012 H3R-214F-60 1701-060 HH1-215F-36 1401-036R-085502 4012-018 45510575 4021-060 50195320 4022-014 4010SC127 2204-007 H3R-214F-72 1701-072 HH1-215F-48 1401-048R-085503 4012-024 45510583 4021-072 50195338 4022-018 401FC1212 2201-012 H3R-214F-84 1701-084 HH1-215F-60 1401-060R-085504 4013-018 45510682 4001-036 50195353 4022-024 401FC1218 2201-018 H3R-214F-9 1701-009 HH1-215F-72 1401-072R-085505 4013-024 45510690 4001-048 50195361 4022-036 401FC127 2201-007 H3R-214F-96 1701-096 HH1-215F-84 1401-084R-085506 4013-036 45510708 4001-060 50195379 4022-048 401FC129 2201-009 H3R-214M-12 1711-012 HH1-215F-9 1401-009R-085507 4014-018 45510716 4001-072 50196385 4004-014 401FC3412 2253-012 H3R-214M-18 1711-018 HH1-215F-96 1401-096R-085508 4014-024 45512480 4013-120 50196401 4004-018 401FC3418 2253-018 H3R-214M-24 1711-024 HH1-215M-18 1411-018R-085509 4014-036 45512498 4013-144 50196419 4004-024 401FC347 2253-007 H3R-214M-36 1711-036 HH1-215M-24 1411-024R-085510 4004-024 45512506 4013-168 50197805 4002-014 401FC349 2253-009 H3R-214M-9 1711-009 HH1-215M-36 1411-036R-085511 4004-036 45512514 4013-084 50197821 4002-018 401MP12 2211-012 H3R-214S-12 1742-012 HH1-215M-9 1411-009R-085519 4003-024 45512522 4013-096 50197904 4003-014 401MP18 2211-018 H3R-214T-9 1782-009 HH1-215S-12 1442-012R-085520 4003-036 45512530 4012-120 50197912 4003-018 401MP7 2211-007 H3R-215F-12 1701-012 HH1-215T-9 1482-009R-085522 4012-036 45512548 4012-144 50197938 4003-024 401MP9 2211-009 H3R-215F-18 1601-018 HH1-323-12 1407-012R-085525 4023-018 45512555 4012-168 50197979 4003-048 401OFC1212 2202-012 H3R-215F-24 1601-024 HH1-323-18 1407-018R-092246 4111-016 45512563 4012-036 50197987 4003-060 401OFC1218 2202-018 H3R-215F-36 1601-036 HH1-323-24 1407-024R-096849 4001-018 45512571 4012-048 50197995 4003-072 401OFC127 2202-007 H3R-215F-48 1601-048 HH1-323-48 1407-048R-096850 4001-014 45512589 4012-060 50198993 4014-072 401OFC129 2202-009 H3R-215F-60 1601-060 HH1-323-60 1407-060R-096851 4011-018 45512597 4012-072 50199207 4001-014 401WBC11412 2205-012 H3R-215F-72 1601-072 HH1-323-72 1407-072R-096852 4011-014 45512605 4012-084 50199215 4001-018 401WBC11418 2205-018 H3R-215F-84 1601-084 HH1-323-84 1407-084R-098002 4103-016 45512613 4012-096 50199223 4001-024 401WBC1147 2205-007 H3R-215F-9 1601-009 HH1-323-9 1407-009R-098003 4104-016 45512621 4011-048 50283183 44-01432H 401WBC1149 2205-009 H3R-215F-96 1601-096 HH1-323-96 1407-096R-098070 4062-012 45512639 4011-060 50283241 44-01435H 9001-276-12 3301-012 H3R-215M-12 1611-012 HH1-324-12 1507-012

I.R. Tamco 45512647 4011-072 50283266 44-01415H 9001-276-18 3301-018 H3R-215M-18 1611-018 HH1-324-18 1507-01822040463 4042-016 45512654 4014-120 50283506 44-01416H 9001-276-24 3301-024 H3R-215M-24 1611-024 HH1-324-24 1507-02422040471 4043-016 45512662 4014-144 50283555 44-01418H 9001-276-36 3301-036 H3R-215M-36 1611-024 HH1-324-36 1507-03622040489 4044-016 45512670 4014-168 50283696 44-01434H 9001-276-9 1/2 3301-010 H3R-215M-9 1611-009 HH1-324-48 1507-04822040588 4162-909 45512688 4014-084 50354596 44-01430H 9001-278 3360-009 H3R-215S-12 1642-012 HH1-324-60 1507-06022040596 4163-909 45512696 4014-096 50712132 44-01436H 9001-279 3361-009 H3R215T-9 1682-009 HH1-324-72 1507-07222040604 4164-909 50050269 4011-014 50712140 44-01437H 9001-280 3362-009 H3R-423-12 1607-012 HH1-324-84 1507-08422040620 4064-012 50050277 4011-018 50712728 44-01417H 9001-281 3363-009 H3R-423-18 1607-018 HH1-324-96 1507-09622040778 44-00307 50050285 4011-024 50712736 44-01419H 9001-282 3364-009 H3R-423-24 1607-024 HH1-324-96 1507-00922040927 44-00307L 50050368 4012-014 50712744 44-01420H 9001-283 3365-009 H3R-423-36 1607-036 HH-215M-12 1411-01222040935 4061-012 50050376 4012-018 50712751 44-01421H 9001-295-12 3358-012 H3R-423-48 1607-048 PF2200-390 1807-007


38

I.R. Tamco I.R. Tamco I.R. Tamco Pioneer Tamco Pioneer Tamco Pioneer Tamco PF2200-390-12 1807-012 WBA1142124 44-01954 WBC781518 44-019625 8011 44-ORB22H 18272 4002-072 36224 1401-024PF2200-390-18 1807-018 WBA1142730 44-019541 WBC782124 44-019626 8012 44-ORB24H 18314 4022-014 36236 1401-036PF2200-390-3 1842-007 WBA1143336 44-019542 WBC782730 44-019627 8013 44-ORB26H 18318 4022-018 36248 1401-048PF2200-390-3-12 1842-012 WBA1144548 44-019544 WBC783336 44-0196271 8014 44-ORB28H 18324 4022-024 36260 1401-060PF2200-390-3-18 1842-018 WBA114912 44-01953 WBC78912 44-019624 8015 44-ORB30H 18336 4022-036 36272 1401-072PF2200-392 1853-007 WBA11518 44-01941 WF-14A-12 2054-018 8016 44-ORB32H 18348 4022-048 36409 1407-009PF2200-392-12 1853-012 WBA11582124 44-01963 WF-14A-18 2054-012 8017 44-ORB36H 18360 4022-060 36412 1407-012PF2200-392-18 1853-018 WBA1181518 44-01944 WF-14A-6 1/8 2054-007 8018 44-ORB40H 18372 4022-072 36418 1407-018PF2200-393 1851-007 WBA1182124 44-01946 WF-14B-11 1/2 2051-012 8019 44-ORB42H 18709 4132-009 36424 1407-024PF2200-393-12 1851-012 WBA1182730 44-019461 WF-14B-18 2051-018 8033 44-ORB56D 18915 44-00308L 36512 1442-012PF2200-393-18 1851-018 WBA1183336 44-019462 WF-14B-6 1/8 2051-007 8034 44-ORB64D 19114 4013-014 41207 1853-007PF2200-394 1854-007 WBA1184548 44-019464 WF-14C-007 2007-007 8119 44-01507 19118 4013-018 41212 1853-012PF2200-394-12 1854-012 WBA118912 44-01943 WF-14C-012 2007-012 10114 4014-014 19124 4013-024 41218 1853-018PF2200-394-18 1854-018 WBA12124 44-01942 WF-14C-018 2007-018 10118 4014-018 19136 4013-036 41307 1851-007WB1121518 44-03044 WBA12730 44-019421 WF-14D-007 2042-007 10124 4014-024 19148 4013-048 41312 1851-012WB1122124 44-03042 WBA13336 44-019422 WF-14D-012 2042-012 10136 4014-036 19160 4013-060 41318 1851-018WB1122730 44-03045 WBA1382124 44-01956 WF-14D-018 2042-018 10148 4014-048 19172 4013-072 41407 1807-007WB1124548 44-03046 WBA1382730 44-019561 WF-14F-12 2053-012 10160 4014-060 19196 4013-096 41412 1807-012WB112912 44-03043 WBA1384548 44-019563 WF-14F-18 2053-018 10172 4014-072 19214 4003-014 41418 1807-018WB1141518 44-01000 WBA138912 44-01955 WF-14F-7 2053-007 10196 4014-096 19218 4003-018 41507 1842-007WB1142124 44-01224 WBA14548 44-0194221 Pioneer Tamco 10214 4004-014 19224 4003-024 41512 1842-012WB1142730 44-03041 WBA1581518 44-030442 357 1582-211 10218 4004-018 19236 4003-036 41518 1842-018WB1143336 44-030411 WBA1912 44-01940 367 1482-211 10224 4004-024 19248 4003-048 41707 1854-007WB1144548 44-030413 WBA341518 44-01937 1044 4084-017 10236 4004-036 19260 4003-060 41712 1854-012WB114912 44-00999 WBA342124 44-01951 1050 4064-012 10248 4004-048 19272 4003-072 41718 1854-018WB11518 44-03039 WBA342730 44-01961 1055 4104-016 10260 4004-060 19296 4003-096 42207 2053-007WB11582124 44-030474 WBA343336 44-019611 1056 4097-014 10272 4004-072 19314 4023-014 42212 2053-012WB1181518 44-00998 WBA344548 44-019614 1078 4074-018 10296 4004-096 19318 4023-018 42218 2053-018WB1182124 44-01223 WBA3469 44-019359 1755 4111-016 10314 4024-014 19324 4023-024 42307 2051-007WB1182730 44-01231 WBA34912 44-01936 1850 4062-012 10318 4024-018 19336 4023-036 42312 2051-012WB1183336 44-012311 WBA581518 44-01948 1855 4102-016 10324 4024-024 19348 4023-048 42318 2051-018WB1184548 44-0123111 WBA582124 44-01950 1856 4095-014 10336 4024-036 19360 4023-060 42407 2007-007WB118912 44-00997 WBA582730 44-01960 1878 4072-016 10348 4024-048 19372 4023-072 42412 2007-012WB12124 44-01232 WBA5869 44-01934 1944 4083-017 10360 4024-060 19616 4043-016 42418 2007-018WB12730 44-01222 WBA58912 44-01935 1950 4063-012 10372 4024-072 19709 4133-009 42507 2042-007WB13336 44-012221 WBA781518 44-01939 1955 4103-016 10616 4044-016 19877 4093-014 42512 2042-012WB1381518 44-01947 WBA782124 44-01952 1956 4096-014 10709 4134-009 19915 44-00309L 42518 2042-018WB1381518 44-03026 WBA782730 44-01949 1978 4073-018 10877 4094-014 35109 1511-009 42707 2054-007WB1382124 44-03027 WBA783336 44-019491 3570 1582-009 10909 44-00294 35112 1511-012 42712 2054-012WB1382730 44-03028 WBA784548 44-019493 3670 1482-009 10915 44-00310L 35118 1511-018 42718 2054-018WB1384548 44-03029 WBA7869 44-019371 7010 44-01515T 17114 4011-014 35124 1511-024 44207 2153-007WB138912 44-03025 WBA78912 44-01938 7020 44-01517T 17118 4011-018 35136 1511-036 44212 2153-012WB14548 44-0122211 WBC1121518 44-01986 7030 44-01516T 17124 4011-024 35148 1511-048 44218 2153-018WB1581518 44-030441 WBC1122124 44-01987 7040 44-01518T 17136 4011-036 35160 1511-060 44307 2151-007WB1912 44-00994 WBC1122730 44-01988 7055 44-01529T 17148 4011-048 35172 1511-072 44312 2151-012WB341518 44-03037 WBC112912 44-01991 7056 44-01539T 17214 4001-014 35209 1501-009 44318 2151-018WB342124 44-01226 WBC1141518 44-01980 7060 44-01503T 17218 4001-018 35212 1501-012 44407 2107-007WB342730 44-01228 WBC1142124 44-01981 7070 44-01520T 17224 4001-024 35218 1501-018 44412 2107-012WB343336 44-012282 WBC1142730 44-01982 7110 44-01813T 17236 4001-036 35224 1501-024 44507 2142-007WB344548 44-012284 WBC1144548 44-019822 7120 44-01811T 17248 4001-048 35236 1501-036 44512 2142-012WB3469 44-01218 WBC114912 44-01989 7127 44-01821T 17314 4021-014 35248 1501-048 44518 2142-018WB34912 44-01219 WBC11518 44-01972 7130 44-01814T 17318 4021-018 35260 1501-060 44707 2154-007WB581518 44-03033 WBC11582124 44-019884 7140 44-01812T 17324 4021-024 35272 1501-072 44712 2154-012WB582124 44-030331 WBC1181518 44-01974 7155 44-01817T 17336 4021-036 35409 1507-009 44718 2154-018WB582730 44-0303311 WBC1182124 44-01978 7156 44-01819T 17348 4021-048 35412 1507-012 51109 3211-009CWB5869 44-03034 WBC1182730 44-01979 7160 44-01810T 17709 4131-012 35418 1507-018 51112 3211-012CWB58912 44-02040 WBC1183336 44-019791 7170 44-01809T 18114 4012-014 35424 1507-024 51118 3211-018CWB781518 44-03038 WBC118912 44-01973 7310 44-01913T 18118 4012-018 35512 1542-012 51209 3201-009WB782124 44-00993 WBC12124 44-01976 7320 44-01911T 18124 4012-024 36109 1411-009 51212 3201-012WB782730 44-01221 WBC12730 44-01977 7330 44-01914T 18136 4012-036 36112 1411-012 51218 3201-018WB783336 44-012211 WBC1381518 44-01983 7340 44-01912T 18148 4012-048 36118 1411-018 51706 3260-009WB784548 44-012214 WBC1382124 44-01984 7360 44-01910T 18160 4012-060 36124 1411-024 51708 3261-009WB7869 44-00991 WBC1382730 44-01985 7410 44-02161T 18172 4012-072 36136 1411-036 51710 3262-009WB78912 44-01229 WBC138912 44-01990 7420 44-02163T 18214 4002-014 36148 1411-048 51712 3263-009WBA1121518 44-01958 WBC1912 44-01971 7450 44-02167T 18218 4002-018 36160 1411-060 51714 3264-009WBA1122124 44-01959 WBC341518 44-01962 7455 44-02169T 18224 4002-024 36172 1411-072 51714 3258-009WBA1122730 44-019591 WBC342124 44-019622 7460 44-02164T 18236 4002-036 36209 1401-009 51810 3311-009WBA112912 44-01957 WBC342730 44-019623 7910 44-022763 18248 4002-048 36212 1401-012 51812 3311-012WBA1141518 44-01945 WBC34912 44-019621 7920 44-022764 18260 4002-060 36218 1401-018 51818 3311-018


39

Pioneer Tamco Pioneer Tamco Pioneer Tamco Sullair Tamco Sullair Tamco Vulcan Tamco51824 3311-024 651436 7004-036 36224R 1601-024 250013-681 4001-018 250013-868 44-01847 F0123 1411-02452112 3311-012 651448 7004-048 36236R 1601-036 250013-682 4002-014 250013-870 44-01848 F0124 1411-03652118 3311-018 651460 7004-060 36248R 1601-048 250013-683 4002-018 250013-871 44-01849 F0125 1411-04852209 3301-010 651648 7005-048 36260R 1601-060 250013-684 4003-014 250013-873 44-01850 F0126 1411-06052212 3301-012 651660 7005-060 36272R 1601-072 250013-685 4003-018 250013-874 44-01851 F0127 1411-07252218 3301-018 651672 7005-072 36409R 1607-009 250013-686 4004-014 250013-876 44-01852 F0180 1401-00952224 3301-024 661236 7603-036 36412R 1607-012 250013-687 4004-018 250013-877 44-01853 F0181 1401-01252706 3360-009 661648 7605-048 36418R 1607-018 250013-689 4021-014 250014-815 4062-012 F0182 1401-01852708 3361-009 661672 7605-072 36424R 1607-024 250013-690 4022-014 250015-265 44-01434H F0183 1401-02452710 3362-009 671436 7404-036 36512R 1642-012 250013-691 4022-018 250021-302 4132-009 F0184 1401-03652712 3363-009 671460 7404-060 3670R 1682-009 250013-692 4023-014 250024-566 1582-009 F0185 1401-04852714 3364-009 671660 7405-060 7070S 44-014508T 250013-693 4023-018 250024-567 1482-009 F0186 1401-06052716 3365-009 681436 7404-036 7170S 44-01818T 250013-694 4024-014 250024-568 1782-009 F0187 1401-07252810 3358-009 681460 7404-060 8011CM HTI-137H 250013-695 4024-018 250024-569 1682-009 F02802 1407-00981012 44-01428H 681660 7405-060 8012CM HTI-150H 250013-697 4063-012 250026-687 44-03140 F02812 1407-01281018 44-01429H 810120 44-01436H 8013CM HTI-162H 250013-698 4064-012 250026-688 44-03141 F02822 1407-01881024 44-01430H 873120 44-01422H 8014CM HTI-175H 250013-700 4111-016 250026-689 44-03142 F02832 1407-02481030 44-014301H 5171004 3270-010 8015CM HTI-187H 250013-701 4102-016 250026-690 44-03143 F02842 1407-03681036 44-01431H 5171006 3273-012 8016CM HTI-200H 250013-702 4103-016 250026-691 44-03144 F02852 1407-04881048 44-01432H 5171008 3276-014 8017CM HTI-225H 250013-703 4104-016 250026-692 44-03145 F02862 1407-06081060 44-01433H 5171204 3271-010 8018CM HTI-250H 250013-712 4084-017 250026-693 44-03146 F02872 1407-07281072 44-01434H 5171206 3274-012 8020CM HTI-275H 250013-717 1401-009 250026-694 44-03147 F120 1611-00981096 44-01435H 5171208 3277-014 8021CM HTI-300H 250013-718 1401-012 250026-695 44-03148 F121 1611-01287312 44-01414H 5171404 3272-010 8119C 44-01504H 250013-719 1401-018 250026-696 44-03149 F122 1611-01887318 44-01415H 5171406 3275-012 81X24 44-01430X 250013-720 1501-009 250026-697 44-03150 F123 1611-02487324 44-01416H 5171408 3278-014 81X36 44-01431X 250013-721 1501-012 250026-698 44-03151 F124 1611-03687330 44-014161H 5271004 3370-010 81X48 44-01432X 250013-722 1501-018 250026-699 44-03152 F125 1611-04887336 44-01417H 5271006 3373-012 87X24 44-01430X 250013-723 1601-009 250026-700 44-01353 F126 1611-06087348 44-01418H 5271008 3376-014 87X36 44-01431X 250013-724 1601-012 250026-701 44-03160 F127 1611-07287360 44-01419H 5271204 3371-010 87X48 44-01432X 250013-725 1601-018 250026-702 44-03161 F180 1601-00987372 44-01420H 5271206 3374-012 87X72 44-01434X 250013-726 1701-009 250026-703 44-03162 F181 1601-01287396 44-01421H 5271208 3377-014 87X96 44-01435X 250013-727 1701-012 250026-704 44-03163 F182 1601-01887412 44-01450H 5271404 3372-010 Sullair Tamco 250013-728 1701-018 250026-705 44-03164 F183 1601-02487418 44-01451H 5271406 3375-012 02250099-965 44-01414H 250013-730 1411-009 250026-706 44-03165 F184 1601-03687424 44-01452H 5271408 3378-014 02250099-966 44-01416H 250013-731 1411-012 250026-707 44-03166 F185 1601-04887430 44-01455H 10907R 44-01352 02250099-967 44-01417H 250013-732 1411-018 250026-708 44-03167 F186 1601-06087436 44-01456H 35109R 1711-009 02250099-968 44-01418H 250013-733 1511-009 250027-004 44-01818 F187 1601-07287448 44-01453H 35112R 1711-012 02250099-969 44-01450H 250013-734 1511-012 250027-005 44-01819 F240 1682-00987460 44-014531H 35118R 1711-018 02250099-970 44-01452H 250013-735 1511-018 250027-006 44-01820 F2802 1607-00987472 44-01454H 35124R 1711-024 02250099-971 44-01456H 250013-736 1611-009 250027-947 4021-018 F2812 1607-012109210 4164-609 35136R 1711-036 02250099-972 44-01453H 250013-737 1611-012 250027-953 4013-014H F2822 1607-018109212 4164-709 35148R 1711-048 02250099-973 44-01428H 250013-738 1611-018 250027-980 4061-012 F2832 1607-024109214 4164-809 35160R 1711-060 02250099-974 44-01430H 250013-740 1711-012 250028-002 4131-012 F2842 1607-036109216 4164-909 35172R 1711-072 02250099-975 44-01431H 250013-741 1711-018 250028-003 4133-009 F2852 1607-048189210 4162-609 35209R 1701-009 02250099-977 44-01432H 250013-756 1407-009 250028-004 4134-009 F2862 1607-060189212 4162-709 35212R 1701-012 02250099-979 HTI-137H 250013-757 1407-012 250028-411 44-03154 F2872 1607-072189214 4162-809 35218R 1701-018 02250099-980 HTI-150H 250013-758 1407-018 250028-412 44-03155 F3813 1642-012189216 4162-909 35224R 1701-024 02250099-981 HTI-175H 250013-759 1507-009 250028-413 44-03156 FO120 1411-009199210 4163-609 35236R 1701-036 02250099-982 HTI-200H 250013-760 1507-012 250030-668 44-031438 FO121 1411-012199212 4163-709 35248R 1701-048 02250099-983 HTI-250H 250013-761 1507-018 250030-669 44-031458 FO122 1411-018199214 4163-809 35260R 1701-060 02250114-209 3358-009 250013-762 1607-009 250030-670 44-031478 FO180 1401-009199216 4163-909 35272R 1701-072 02250118-435 HTI-300H 250013--763 1607-012 250030-671 44-031498 FO181 1401-012390107 2211-007 35409R 1707-009 02250136-634 1442-012 250013-764 1607-018 250039-805 44-031518 FO182 1401-018390112 2211-012 35412R 1707-012 02250139-375 1401-036 250013-765 1707-009 250039-806 44-031538 FO183 1401-024390118 2211-018 35418R 1707-018 02250142-136 4001-024 250013-766 1707-012 250039-807 44-031618 FO240 1482-009390207 2201-007 35424R 1707-024 02250142-930 4001-036 250013-767 1707-018 250039-808 44-031631 FO2802 1407-009390212 2201-012 35512R 1742-012 0225099-974 44-01430H 250013-769 3301-010C Vulcan Tamco FO2812 1407-012390218 2201-018 3570R 1782-009 2500013-739 1711-009 250013-770 3301-012C CR180 1853-007 FO2822 1407-018390307 2205-007 36109R 1611-009 250013-663 1854-007 250013-771 3301-018C CR181 1853-012 FO2832 1407-024390312 2205-012 36112R 1611-012 250013-664 1853-007 250013-781 3311-010C CR182 1853-018 FO3813 1442-012390318 2205-018 36118R 1611-018 250013-671 4011-014 250013-782 3311-012C CR2805 1851-007 G0120 1511-009390707 2205-807 36124R 1611-024 250013-672 4011-018 250013-783 3311-018C CR2805A 1854-007 G0121 1511-012392207 2253-007 36136R 1611-036 250013-673 4012-014 250013-850 44-01840 CR2815 1851-012 G0122 1511-018392212 2253-012 36148R 1611-048 250013-674 4012-018 250013-851 44-01841 CR2815A 1854-012 G0123 1511-024392218 2253-018 36160R 1611-060 250013-675 4013-014 250013-856 44-01842 CR2825 1851-018 G0124 1511-036651018 7002-018 36172R 1611-072 250013-676 4013-018 250013-857 44-01843 CR2825A 1854-018 G0125 1511-048651024 7002-024 36209R 1601-009 250013-677 4014-014 250013-862 44-01844 F0120 1411-009 G0126 1511-060651224 7003-024 36212R 1601-012 250013-678 4014-018 250013-863 44-01845 F0121 1411-012 G0127 1511-072651236 7003-036 36218R 1601-018 250013-680 4001-014 250013-867 44-01846 F0122 1411-018 G0180 1501-009


40

Vulcan Tamco Vulcan Tamco Vulcan Tamco Vulcan Tamco Vulcan Tamco Vulcan TamcoG0181 1501-012 520-1 44-01414H 551-24 44-00993 557-12 44-030472 934R 4021-014H 1800 4162-609G0182 1501-018 520-1.5 44-01415H 551-24SPL 44-019626 557-24 44-030474 935 4021-018 1801 4162-709G0183 1501-024 520-10 44-01422H 551-30 44-01221 557-24SP 44-01963 935R 4021-018H 1802 4162-809G0184 1501-036 520-2 44-01416H 551-30SPL 44-019627 557-30 44-030475 936 4022-014 1803 4162-909G0185 1501-048 520-2.5 44-014161H 551-36 44-012211 560 44-03140 936R 4022-014H 1804 4163-709G0186 1501-060 520-3 44-01417H 552 44-01230 561 44-03141 937 4022-018 1805 4163-809G0187 1501-072 520-4 44-01418H 552-10 44-01436H 562 44-03142 937R 4022-018H 1806 4163-909G02802 1507-009 520-5 44-01419H 552-12 44-00994 563 44-03143 942 4061-012 1807 4164-809G02812 1507-012 520-6 44-01420H 552-12SPL 44-01971 563-18 44-031438 943 4062-012 1808 4164-909G02822 1507-018 520-8 44-01421H 552-18 44-03039 564 44-03144 945 4071-016 4000 3211-010G02832 1507-024 521-1 44-01450H 552-18SPL 44-01972 565 44-03145 946 4072-016 4001 3211-012G02842 1507-036 521-1.5 44-01451H 552-24 44-01232 565-18 44-031458 952R 4002-014H 4002 3211-018CG02852 1507-048 521-2 44-01452H 552-24SPL 44-01976 566 44-03146 965 44-01352 4100 3201-009G02862 1507-060 521-2.5 44-01455H 552-30 44-01222 567 44-03147 968 44-01360 4101 3201-012G02870 1507-072 521-3 44-01456H 552-30SPL 44-01977 567-18 44-031478 969 44-01362 4102 3201-018CGO3813 1542-012 521-4 44-01453H 552-36 44-012221 568 44-03148 972 4102-016 4300 3258-009G120 1711-009 521-5 44-014531H 552-5 44-01433H 569 44-03149 972S 4102-916 5000 3311-009G121 1711-012 521-6 44-01454H 552-6 44-01434H 569-18 44-031498 982 4111-016 5001 3311-012G122 1711-018 522-1 44-01428H 552-8 44-01435H 569-23 44-031497 982S 4111-916 5002 3311-018G123 1711-024 522-1.5 44-01429H 553-12 44-00997 570 44-03150 1011 4011-014 5100 3301-009G124 1711-036 522-2 44-01430H 553-12SP 44-01943 571 44-03151 1011R 4011-014H 5101 3301-012G125 1711-048 522-2.5 44-014301H 553-12SPL 44-01973 571-18 44-031518 1012 4011-018 5102 3301-018G126 1711-060 522-3 44-01431H 553-18 44-00998 572 44-03152 1012R 4011-018H 5103 3301-024G127 1711-072 522-4 44-01432H 553-18SP 44-01944 573 44-03153 1013 4012-014 9100 44-01840G180 1701-009 522-5 44-01433H 553-18SPL 44-01974 573-18 44-031538 1013R 4012-014H 9101 44-01841G181 1701-012 522-6 44-01434H 553-24 44-01223 574 44-03160 1014 4012-018 9102 44-01855G182 1701-018 522-8 44-01435H 553-24SP 44-01946 575 44-03161 1014-2 4012-024 9103 44-01856G183 1701-024 522-2EXT 44-01430X 553-24SPL 44-01978 575-18 44-031618 1014R 4012-018H 9104 44-01842G184 1701-036 522-3EXT 44-01431X 553-30 44-01231 576 44-03162 1019 4013-014 9105 44-01843G185 1701-048 522-4EXT 44-01432X 553-30SP 44-019461 577 44-03163 1019R 4013-014H 9106 44-01844G186 1701-060 522-6EXT 44-01434X 553-30SPL 44-01979 577-18 44-031631 1020 4013-018 9107 44-01845G187 1701-072 522-8EXT 44-01435X 553-36 44-012311 578 44-03164 1020-2 4013-024 9107-18 44-018458G240 1782-009 546 44-03034 554-12 44-00999 579 44-03165 1020-3 4013-036 9108 44-01846G2802 1707-009 546-12 44-02040 554-12SP 44-01953 580 44-03166 1020R 4013-018H 9109 44-01847G2812 1707-012 546-12SP 44-01935 554-12SPL 44-01989 581 44-03167 1023 4014-014 9109-18 44-018471G2822 1707-018 546-18 44-03033 554-18 44-01000 582 44-03154 1023R 4014-014H 9110 44-01848G2832 1707-024 546-18SP 44-01948 554-18SP 44-01945 583 44-03155 1024 4014-018 9111 44-01849G2842 1707-036 546-24 44-030331 554-18SPL 44-01980 584 44-03156 1024-2 4014-024 9111-18 44-018491G2852 1707-048 546-24SP 44-01950 554-24 44-01224 585 44-03157 1024-3 4014-036 9113 44-01851G2862 1707-060 547-12 44-01950 554-24SP 44-01954 586 44-031571 1024R 4014-018H 9114 44-01852G2872 1707-072 547-18 44-01937 554-24SPL 44-01981 587 44-031572 1030 4003-014 9115 44-01853G3813 1742-012 547-24 44-01951 554-30 44-03041 610-1 44-01428D 1030R 4003-014H 9136 4042-016HC112 HTI-150H 547-30 44-01961 554-30SP 44-019541 610-1.5 44-01429D 1031 4003-018 9156 4043-016HC134 HTI-175H 547-36 44-019611 554-30SPL 44-01982 610-2 44-01430D 1031-2 4003-024 9166 4044-016HC138 HTI-137H 548-12 44-01938 554-36 44-030411 610-3 44-01431D 1031-3 4003-036 112HS 44-0RB24HHC158 HTI-162H 548-18 44-01939 555-12 44-03025 610-4 44-01432D 1031R 4003-018H 114ES 44-0RB20EHC178 HTI-187H 548-24 44-01952 555-12SP 44-01955 610-6 44-01434D 1034 4004-014 118ES 44-0RB18EHC200 HTI-200H 548-30 44-01949 555-12SPL 44-01990 810 4082-017 1034R 4004-014H 1311S 44-00294HC212 HTI-250H 548-36 44-019491 555-18 44-03026 812 4083-017 1035 4004-018 134HS 44-ORB28HHC214 HTI-225H 549-12 44-01940 555-18SP 44-01947 813 4084-017 1035-2 4004-024 138HS 44-0RB22HHC234 HTI-275H 549-18 44-01941 555-18SPL 44-01983 817W 4093-014 1035-3 4004-036 156ES 44-0RB15EHC300 HTI-300H 549-24 44-01942 555-24SP 44-01956 818W 4094-014 1035R 4004-018H 158HS 44-0RB26HTH-30 44-01504H 549-30 44-019421 555-24SPL 44-01984 841 4096-014 1040 4023-014 178HS 44-0RB30HTH-D 44-01507 549-36 44-019422 555-30 44-03028 844 4097-014 1040R 4023-014H 200HS 44-0RB32HWF180 2053-007 550 44-01218 555-30SP 44-019561 846 4131-012 1041 4023-018 212HS 44-0RB40HWF181 2053-012 550-12 44-01219 555-30SPL 44-01985 847 4132-009 1041R 4023-018H 214HS 44-0RB36HWF182 2053-018 550-12SPL 44-019621 556-12 44-03043 848 4133-009 1042 4024-014 258HS 44-0RB42HWF2805 2051-007 550-18 44-03037 556-12SP 44-01957 849 4134-009 1042R 4024-014H 312DS 44-0RB56DWF2805A 2054-007 550-18SPL 44-01962 556-12SPL 44-01991 865 44-00308L 1043 4024-018 400DS 44-0RB64DWF2815 2051-012 550-24 44-01226 556-18 44-03044 867 44-00309L 1043R 4024-018HWF2815A 2054-012 550-24SPL 44-019622 556-18SP 44-01958 868 44-00310L 1045 4063-012WF2825 2051-018 550-30 44-01228 556-18SPL 44-01986 923 4001-014 1046 4064-012WF2825A 2054-018 550-30SPL 44-019623 556-20SP 44-019591 923R 4001-014H 1046 4064-012418-1 44-01414E 550-36 44-012282 556-24 44-03042 924 4001-018 1048 4073-018418-1.5 44-01415E 551 44-00991 556-24SP 44-01959 924R 4001-018H 1049 4074-018418-2 44-01416E 551-12 44-01229 556-24SPL 44-01987 925 4002-014 1051 44-01363418-2.5 44-014161E 551-12SPL 44-019624 556-30 44-03045 926 4002-018 1052 44-01364418-3 44-01417E 551-18 44-03038 556-30SP 44-019591 926R 4002-018H 1075 4103-016418-4 44-01418E 551-18SPL 44-019625 556-30SPL 44-01988 934 4021-014 1077 4104-016


Intended Uses of Forged ToolsMoil Points - Narrow Chisel Bits:These can be used in just about anything as long as they can move through. They are the proper tool to use on cement. When using in hard work, the extra grade tools are recommended. The Broad Moil Point is probably the best tool for cement work as there is more wedging action to it.

3” Blade Chisel, Digging Chisels:Their use is confi ned to easier working material such as hardpan gravel and the like. Although they might be used in seamy or shaley rock, they should be used for asphalt cutting.

Asphalt Cutters:The name of this tool describes its primary use, cutting asphalt. It should be used on soft material becaused of the size of the blade. It could be used as a sod cutter and in hardpan or any place where there are no rocks.

Clay Spade:Digging in clay is what this tool was designed to do. It should be used in soft materials where there are no rocks because of the thin sharp blade.

Frost Wedge:This tool is used for breaking frozen ground although it may be used wherever a wedge could be driven for split-ting action.

Tamper Pads and Sheathing Driver:These are quite self-explanatory.

Stake Driver / Pipe Driver (two-piece construction)These tools use detachable or tamper shanks and fi t over the outside of the stakes or pipe for driving into the ground.

Concrete Buster:This is used for breaking concrete after a hole is drilled. The buster is driven into the hole. This does not work as well as the rock buster because there are no shims for it to slide on.

Good Safey Practices Tamco tools are carefully manufactured from quality steel and are properly heat treated. Our tools are safe to use when used properly. Steel will fatigue if continuously used with dull cutting edges. Dull cutting edges also prevent work from being done effi ciently. The extra energy used to drive dull cutting edges is absorbed by the steel and contributes to the fatigue of the steel. To provide good production, tools should be sharpened often. When the original hardened steel cutting edges are worn away the tools should be ground on a grinding wheel or reforged - then properly heat treated. Hand-held tools that are struck with a hammer will eventually upset on the head and chip off. Hammers must strike on the center of the face and tools must be struck on the center of the head to reduce upsetting and chipping of either the hammer or the tool. Upset edges should be ground off frequently to avoid chips from breaking off and fl ying. Tools and drills with carbide cutting edges should be ground on silicon carbide grinding wheels when the cutting edges become dull. It is easier to grind often than to grind a large amount of dull carbide later. Drills should be sharpened regularly after drilling 25 or more holes depending upon the hardness and abrasiveness of the material being drilled. Good safety practice is for workmen to use gloves, safety glasses, hard hats, and safety shoes. Use of these safety items is usually required by utility companies and contracting fi rms and their good safety practices are worth following.

Remember - improper use may cause breakage and serious injury.

2014 AIR TOOL PARTS BINDER

**ALL PRICING IS SUBJECT TO CHANGE WITHOUT NOTICE**

http://www.carid.com/tamco/

Toku TPB-90 Paving Breaker

21

22

800

3334

28

30

31

32

32

29

4041

42

44AB

27

263

36

37

35A

35B

38

23

2

1

39

11

2045

1848

13

64

58

7

910

16

14

1512 19

2425

13

17

51

52

50

RR

R

Old Style

IIndex Tamco Harper Thor APT Jet Kent Description List Price1 410271010 66901 46895 140 PB90-01 K05728 Cylinder 701.012 136301011* 66902 48385 1743 PB90-02 K04039 Cylinder Plug 3.063 410271040 66903 43484 118 PB90-03 K00042 Piston 120.454 410241150* 66904 43186 104 PB90-04 K05700 Automatic Valve 55.915 410271190 66905 43480 117 PB90-05 K05704 Valve Chest 113.306 410271170 66906 46894 PB90-06 K05705 Valve Seat 65.967 410271200 66907 43478 116 PB90-07 K05702 Valve Guide 107.578 130401035* 66908 43477 115 PB90-08 K05701 Valve Chest Dowel Pin 2.849 410241660* 66909 43474 113 PB90-09 K01297 Plunger 15.1810 130801040* 66910 43475 114 PB90-10 K01298 Plunger Spring 8.3011 410271480 66911 51973 PB90-11 Back Head (Bare) 428.6712 131105017* 66912 82907 PB90-12 K05706 Back Head Port Seal O-Ring 6227-17 2.4513 136601011* 66913 43476 160 PB90-13 K03019 Rubber Grip 6.1714 410201270* 66914 46893 PB90-14 KBM01285 Throttle Valve 31.5014R 410241E00^ Throttle Valve Pin Retro Fit 38.2215 410201300* 66915 43395 106 PB90-15 K01294 Throttle Valve Stem Guide 25.7716 130801041* 66916 43397 107 PB90-16 K01291 Throttle Valve Spring 2.7416R 130801009^ Throttle Spring Retro Fit 0.0017 410241311* 66917 43428 132 PB90-17A K01296 Throttle Lever 39.1518 410201330* 66918 43393 105 PB90-18 Throttle Lever Pin 8 x 30 3.1119 134905012 66919 43399 108 PB90-19 K01293 Oil Plug 8.5720 134903001* 66920 68073 111 PB90-20 K00731 Oil Control Plug Hex Pt 1/8” 2.4521 410271531 66921 46900 PB90-21 Front Head 480.2622R 130505048^ Poly Rubber Ball 3/4” Retro Fit 6.0623 131501018 66923 43502 PB90-23 KBM001126 Back Head Bolt 21.1824 131301116* 66924 43143 102 PB90-24 K09847 Back Head Bolt Lock Washer M16 .7725 410241510* 66925 43500 121 PB90-25 K01274 Back Head Bolt Nut 6.6026 410271591 66926 46897 137 PB90-26 K05709 Tappet Seat 140.4827 410271581 66927 46896 136 PB90-27 K00068 Tappet 84.5728 410241610* 66928 43527 130 PB90-28 K01136 Steel Retainer 54.7129 410241620* 66929 43524 PB90-29 K01132 Steel Retainer Bolt 24.5130 134601019* 66930 43525 129 PB90-30 K00954 Hex Nylon Nut 2.8431 131303048* 66931 43007 101 PB90-31 K03997 Steel Retainer Bolt Nut Washer 3/4” 1.1432 136301010* 66932S 45605(S) PB90-32 K01131 Steel Retainer Bolt Bushing 10.75

136301010R K05719 Rubber Retainer Bolt Bushing 3.33136301010P Poly Retainer Bolt Bushing 11.52

33 410241650* 66933 43522 126 PB90-33 K01287 Steel Retainer Plunger 4.1534 130801042* 66934 43521 125 PB90-34 K01288 Steel Retainer Spring 3.6135A 410271370* 66935 43512 124 PB90-35 KBM01300 Air Inlet Swivel 52.9735B 131103023* 66922 45259 151 PB90-35B K05713 Air Inlet Swivel O-Ring S-29 1.1436 410271390* 66936 43169 103 PB90-36 KBM01295 Air Inlet Swivel Nut 37.2437 131102002* 66937 48401

918811188 PB90-37 K01937 Air Inlet Swivel Nut O-Ring G-30 1.58

38 136801007* 66938 43510 123 PB90-38 K00508 Air Inlet Screen 4.0539 131501017 66939 98434 PB90-39 KBM05708 Front Head Bolt 26.3240 410241550* 66940 43414 110 PB90-40 K01129 Front Head Bolt Nut 6.0141 410241560* 66941 91468 138 PB90-41 K01289 Front Head Bolt Lock Washer 15.1842 130801043* 66942 43412 109 PB90-42 K01290 Front Head Bolt Spring 24.7344A 410241572* 66943 46898 PB90-43A Front Head Bushing 1-1/8” 104.6144B 410245572* 66944 46899 PB90-43B Front Head Bushing 1-1/4” 104.6145 136101011* 66945 43473 112 PB90-45 K00591 Felt Oiler 2.6248 134903004 66948 48402 PB90-48 Oil Tank 9.7850 130604040* PB90-50 Spring Pin 1.9151 410241760* PB90-51 Stop Lever 8.9552 130801046* PB90-52 Stop Lever Spring 2.4011CP 41027148J 66951 51973 Back Head 500.3044ACP 41027153D 66955 Front Head CMP 1-1/8”

(Incl # 21,28,29,30,31,32,33,34,44A)686.70

44BCP 41027553D 66956 43533 Front Head CMP 1-1/4”(Incl # 21,28,29,30,31,32,33,34,44B)

686.70800 41027187C Muffl er 272.34




22

45

20

2425

50

5251

23

39

36 373835B35A

800

1

2

45

6

78

109

11

12

1415

16

18

13

19

17

3

27

26

21

44AB29

4241

40

30

3334

28

32

31

RR

R

Old Style

IIndex Tamco Harper Thor APT Jet Kent Description List Price1 410241010 66601 PB60-01 K04036 Cylinder 657.992 136301011* 66902 48385 PB90-02 K04039 Cylinder Plug 3.063 410241041 66603 43436 174 PB60-03 K00043 Piston 98.994 410241150* 66904 43186 104 PB90-04 K05700 Automatic Valve 55.915 410241190 66605 43432 171 PB60-05 K05806 Valve Chest 77.376 410241170 66606 43431 170 PB60-06 K05805 Valve Seat 63.077 410241200 66607 43430 169 PB60-07 K05704 Valve Guide 74.478 130401035* 66908 43477 115 PB90-08 K05701 Valve Chest Dowel Pin 2.849 410241660* 66909 43474 113 PB90-09 K01297 Plunger 15.1810 130801040* 66910 43475 114 PB90-10 K01298 Plunger Spring 8.3011 410241480 66611 160 PB60-11 Back Head (Bare) 371.3312 131105017* 66912 82907 PB90-12 K05706 Back Head Port Seal O-Ring 6227-17 2.4513 136601011* 66913 43476 PB90-13 K03019 Rubber Grip 6.1714 410201270* 66914 46893 PB90-14 KBM01285 Throttle Valve 31.5014R 410241E00^ Throttle Valve Pin Retro Fit 38.2215 410201300* 66915 43395 106 PB90-15 K01294 Throttle Valve Stem Guide 25.7716 130801041* 66916 43397 107 PB90-16 K01291 Throttle Valve Spring 2.7416R 130801009^ Throttle Spring Retro Fit 0.0017 410241311* 66917 43428 132 PB90-17 K01296 Throttle Lever 39.1518 410201330* 66918 43393 105 PB90-18 Throttle Lever Pin 8 x 30 3.1119 134905010 66648 43175 PB60-19 Oil Plug 9.3420 134903001* 66920 68073 111 PB90-20 K00731 Oil Control Plug Hex Pt 1/8” 2.4521 410241531 66621 Front Head 471.6422R 130505048^ Poly Rubber Ball 3/4” Retro Fit 6.0623 131501015 66623 43441 239 PB60-23 KBM00126 Back Head Bolt 21.4624 131301116* 66924 43143 102 PB90-24 K09847 Back Head Bolt Lock Washer M16 .7725 410241510* 66925 43500 121 PB90-25 K01274 Back Head Bolt Nut 6.6026 410241591 66626 43437 175 PB60-26 K02021 Tappet Seat 131.9127 410241581 66627 43408 262 PB60-27 K00061 Tappet 81.7328 410241610* 66928 43527 130 PB90-28 K01136 Steel Retainer 54.7129 410241620* 66929 43524 PB90-29 K01132 Steel Retainer Bolt 24.5130 134601019* 66930 43525 129 PB90-30 K00954 Hex Nylon Nut 2.8431 131303048* 66931 43007 101 PB90-31 K03997 Steel Retainer Bolt Nut Washer 3/4” 1.1432 136301010* 66932S 45605(S) PB90-32 K01131 Steel Retainer Bolt Bushing 10.75

136301010R K05719 Rubber Retainer Bolt Bushing 3.33136301010P Poly Retainer Bolt Bushing 11.52

33 410241650* 66933 43522 126 PB90-33 K01287 Steel Retainer Plunger 4.1534 130801042* 66934 43521 125 PB90-34 K01288 Steel Retainer Spring 3.6135A 410271370* 66935 43512 PB90-35 KBM01300 Air Inlet Swivel 52.9735B 131103023* 66922 45259 PB90-35B K01639 Air Inlet Swivel O-Ring S-29 1.1436 410271390* 66936 43169 PB90-36 KBM01295 Air Inlet Swivel Nut 37.2437 131102002* 66937 48401

91881PB90-37 K01937 Air Inlet Swivel Nut O-Ring G-30 1.58

38 136801007* 66938 43510 PB90-38 K00508 Air Inlet Screen 4.0539 131501016 66639 98434 124 PB90-39 KBM01128 Front Head Bolt 26.3240 410241550* 66940 43414 110 PB90-40 K01129 Front Head Bolt Nut 6.0141 410241560* 66941 91468 PB90-41 K01289 Front Head Bolt Lock Washer 15.1842 130801043* 66942 43412 109 PB90-42 K01290 Front Head Bolt Spring 24.7344A 410241572* 66643 PB60-43A Front Head Bushing 1-1/8” 104.6144B 410245572* 66644 PB60-43B Front Head Bushing 1-1/4” 104.6145 136101011* 66945 43473 112 PB90-45 K00591 Felt Oiler 2.6250 130604040* PB90-50 Spring Pin 1.9151 410241760* Stop Lever 8.9552 130801046* Stop Lever Spring 2.4011CP 41024148J 66651 Back Head 435.8244ACP 41024153D 66655 182 Front Head CMP 1-1/8”

(Incl # 21,28,29,30,31,32,33,34,44A)672.35

44BCP 41024553D 66656 183 Front Head CMP 1-1/4”(Incl # 21,28,29,30,31,32,33,34,44B)

672.35

800 41024187C Muffl er 215.07**ALL PRICING IS SUBJECT TO CHANGE WITHOUT NOTICE**


* Denotes the parts are the same as Toku TPB-90^ Denotes retro parts 14R, 16R, and 22R as a set can be used in place of set 14 / 16, please see schematic.

IIndex Tamco Harper Thor Jet Kent Description List Price1 410231010 66401 PB40-01 K04075 Cylinder 543.333 410231040 66403 PB40-03 K04076 Piston 104.614 410231150 66405 PB40-04 K04077 Valve 68.145 410231190 66404 PB40-05 K04078 Valve Chest 51.116 131101045 66406 PB40-06 K04079 Valve Chest O-Ring P-46 2.247 410231180 66407 PB40-07 K04080 Valve Cover 55.868 131111356 66408 PB40-08 K04081 Valve Chest O-Ring JASO-3056 8.5710 131313050 66410 PB40-10 K04082 Cone Disc Spring H-25 8.5711 410231490 66411 PB40-11 Back Head - Bare 328.2612 130606030 Spring Pin 6 x 30 2.9513 136601011*** 66913 43476 PB40-13 K03019 Rubber Grip 6.1714 410231321 66414 PB40-14 KBM04085 Throttle Push Rod 22.8815 410231281 66415 PB40-15 K04086 Throttle Valve Bushing 25.1216 130801036^ 66313 PB40-16 K04087 Throttle Valve Spring 4.3217 410241311*** 66917 43428 PB40-17 K01296 Throttle Lever 39.1518 410201330*** 66918 43393 PB40-18 K01292 Throttle Lever Pin 8 x 30 3.1119 130655030 Spring Roll Pin 8 x 30 (Spiral) 6.8821 410231530 66421 PB40-19 K04090 Front Head 371.3323 410201500^ 66323 43040 PB40-23 KBM06129 Back Head Bolt 14.3124 131303032^ 66324 50734 PB40-24 K01146 Back Head Bolt Lock Washer 1/2 .7725 134201012^ 66325 43014 PB40-25 K00694 Back Head Bolt Nut 2.3528 410241610*** 66928 43527 PB40-28 K01137 Steel Retainer 54.7129 410231620*** 66929 43524 PB40-29 K01132 Steel Retainer Bolt 24.5130 134601019*** 66930 43525 PB40-30 K00954 Hex Nylon Nut (Steel Rtr. Bolt Nut) 2.8431 131313041*** PB40-31 Coned Disc Spring H-20 2.5732 136301009 66932 45605 PB40-32 K05719 Steel Retainer Bolt Bushing 10.9233 410241650*** 66933 43522 PB40-33 K01287 Steel Retainer Plunger 4.1534 130801042*** 66934 43521 PB40-34 K01288 Steel Retainer Spring 3.6135A 410231370 66635 PB40-35 K05802 Air Inlet Swivel 57.3435B 136801001 66622^ PB40-35B K01551 Air Inlet Screen 3.7135C 131103019 66438 PB40-38 K02846 Air Inlet Swivel O-Ring S-24 1.8636 410231390 66436 PB40-36 K05800 Air Inlet Swivel Nut 47.0137 131101033 66637^ PB40-37 K01932 Air Inlet Swivel Nut O-Ring P-32 3.9838 410231410 66454 K04088 Air Inlet Swivel Spacer 11.9139 410201540 66339^ 98424 PB40-39 KBM06131 Front Head Bolt 14.3140 134201012 66340^ 43759 PB40-40 K00694 Front Head Bolt Nut 2.3544B 410235570 66444 PB40-44 K04091 Front Head Bushing 1” 94.0346 130505048 66449 SB-3/4 K04092 Throttle Valve Ball 3/4” 6.0648 131101003 66448 PB40-48 K04093 Throttle Push Rod O-Ring P-5 2.7450 130604040*** PB90-50 Spring Pin 1.9151 410241760*** PB90-51 Stop Lever 8.9552 130801046*** PB90-52 Stop Lever Spring 2.4035CP 41023148A 66465 PB40-11CP Back Head (Incl.#11,13,14,15,16,17,18,

35A,35B,35C,36,37,38,46,48,50,51,52,55)

557.69

801 41023187C Muffl er 186.35



*** Denotes the parts are the same as Toku TPB-60 and TPB-90^ Denotes the parts are the same as Toku TPB-30


22

21

29

3231

30

40

39

3433

28

44AB

1

25

36

45

16

14

15

710

48

19

11

38

47

36

37

35

18

18

4520

2351

52

1750

800

13

13

8

R

RR

Old Style

IIndex Tamco Harper Thor APT Jet Kent Description List Price1 410201010 66301 43026 PB30-01 K06145 Cylinder 672.353 410201040 66303 43028 193 PB30-03 K00021 Piston 98.994 410201151 66304 43038 PB30-04 K06102 Valve 38.665 410201191 66305 43037 195 PB30-05 K06107 Valve Chest 65.256 410201171 66306 43036 194 PB30-06 K06108 Valve Seat 48.607 410201201 66307 43039 197 PB30-07 K06103 Valve Guide 65.088 130401025 66308 43043 199 PB30-08 K06105 Valve Chest Dowel Pin 1.8610 130801023 66310 43042 1556 PB30-10 K06104 Plunger Spring 4.3211 410201480 66311 43795 4357 K06142 Back Head 511.7113 136601011*** 66913 43476 160 PB30-13 K03019 Rubber Grip 6.1714 410201270*** 66914 46893 PB30-14 K01285 Throttle Valve 31.5014R 410201E00^ Throttle Pin Retro Fit 38.2215 410201300*** 66915 43395 106 K01203 Throttle Valve Stem Guide 25.7716 130801026 66313 43047 2000 K06123 Throttle Valve Spring 4.9216R 130801031^ Retro Fit Spring 5.6317 410241311*** 66917 43428 132 PB30-15 K01296 Throttle Lever 39.1518 410201330*** 66918 43393 105 PB30-16 K01292 Throtte Lever Pin 3.1119 134905012 66319 43399 108 K01293 Oil Plug (NPTF 1/2”) 8.5720 134903001*** 66920 68073 PB30-17 K00731 Oil Control Plug (PP-2 PT 1/8”) 2.4521 410201530 66321 43783 3123 PB30-18 Front Head 321.1622R 130505048^ PB30-19 Poly Rubber Ball 3/4” Retro 6.0623 410201500 66323 49020 PB30-20 Back Head Bolt 14.3125 134201012 66325 49019 PB30-21 K00694 Nylon Nut (UNF 1/2”) 2.3528 410201610 66328 43784 893 K01137 Steel Retainer 35.7129 410201621 66329 43787 PB30-23 Steel Retainer Bolt 30.8530 134601016*** PB30-25 K00520 Nylon Nut (UNF 5/8”) 10.9731 131301116 66924 46897 PB30-28 K09847 Spring Washer M16 .7732 410201640 66332 43786 PB30-29 K00667 Steel Retainer Bolt Bushing 11.3633 410201650 66333 43788 207 PB30-30 K02034 Steel Retainer Plunger 5.5734 130801028 66334 43785 TS-50101 K02033 Steel Retainer Spring 6.5035 410201370 66335 43791 1816 PB30-32 K06116 Air Inlet Swivel 52.6936 410201390 66336 43792 1815 PB30-33 K06113 Air Inlet Swivel Nut 39.2637 131103014 66346 91108 1814 PB30-34 K02278 O-Ring S-16 .8738 136801005 66338 43044 1827 PB30-35 K02043 Air Inlet Screen 4.1539 410201540 66339 47947 PB30-36 Front Head Bolt 14.3140 134201012 66340 91126 PB30-37 K00694 Nylon Nut (UNF 1/2”) 2.3544A 410201570 66343 43024 191 K01280 Front Head Bushing 7/8” 78.7944B 410205570 66344 43025 192 PB30-38 K01282 Front Head Bushing 1” 78.7945 136101011*** 66495 43473 112 PB30-39 K00591 Oil Control Felt 2.6247 130801027 66347 47754 1817 PB30-40 K06114 Air Inlet Swivel Spring 2.9548 134903002 49713 PB30-44A GDL Plug (NPTF 1/4”) 4.3250 130604040 PB30-44B Spring Pin 4 x 40 1.9151 410241760*** PB30-45 Stop Lever 8.9552 130801046*** PB30-47 Stop Lever Spring 2.4011CP 41020148E 66365 44011 Back Head Complete 643.6821CP 41020153D 66369 3143 KBM06146 Front Head Complete

(Incl # 21,28,29,30,31,32,33,34)570.14

800 41020187C Muffl er 186.35


* Denotes the parts are the same as Toku TPB-90*** Denotes the parts are the same as Toku TPB-90 and TPB-60^ Denotes retro parts 14R, 16R, and 22R as a set can be used in place of set 14 / 16, please see schematic.


Toku TRC-30 Trench Digger

21

29

3231

30

40

39

3433

28

44AB

1

25

800

47

36

37

35

22T

19

4520

60

14T

63

64

38

17T

18

11T

Old Style

IIndex Tamco Harper Thor APT Jet Kent Description List Price1 410201010 66301 43026 PB30-01 K06145 Cylinder 672.3511T 410221480 66309 44011 91159 TD30-11 Back Head 815.8911TCP 41022148A 66368 45294 Back Head Complete 973.3614T 410221E00 Throttle Pin 11.6917T 410221310 66316 48879 1819 TD30-17T Throttle Lever 42.3218 410201330*** 66918 43393 105 PB30-18 Throttle Lever Pin 3.1119 134905012 66319 209 PB30-19 Oil Plug (NPTF) 8.5720 134903001 66920 68073 PB30-20 Oil Control Plug (PP-2 PT 1/8”) 2.4521 410201530 66321 43783 3143 PB30-18 K01283 Front Head 321.1621CP 41020153D 66369 3143 KBM06146 Front Head (Complete)

(Incl. 21,28,29,30,31,32,33,34)570.14

22T 130505036 Throttle Valve Ball 9/16” 8.7925 134201012 66325 49019 PB30-21 K00694 Nylon Nut (UNF 1/2”) 2.3528 410201610 66328 43784 893 K01137 Steel Retainer 35.7129 410201621 66329 43787 PB30-23 Steel Retainer Bolt 30.8530 134601016*** PB30-25 K00520 Nylon Nut (UNF 5/8”) 10.9731 131301116 66924 46897 PB30-28 K09847 Spring Washer M16 .7732 410201640 66332 43786 PB30-29 K00667 Steel Retainer Bolt Bushing 11.3633 410201650 66333 43788 207 PB30-30 K02034 Steel Retainer Plunger 5.5734 130801028 66334 43785 TS-50101 K02033 Steel Retainer Spring 6.5035 410201370 66335 43791 PB30-35 K06116 Air Inlet Swivel 52.6936 410201390 66336 43792 PB30-36 K06113 Air Inlet Swivel Nut 39.2637 131103014 66346 91108 PB30-37 K02278 O-Ring (S-16) .8738 136801005 66338 43044 PB30-38 K02043 Air Inlet Screen 4.1539 410201540 66339 47947 PB30-36 Front Head Bolt 14.3140 134201012 66340 91126 PB30-37 K00694 Nylon Nut (UNF 1/2”) 2.3544A 410201570 66343 43024 191 K01280 Front Head Bushing 7/8” 78.7944B 410205570 66344 43025 192 PB30-38 K01282 Front Head Bushing 1” 78.7945 136101011*** 66945 43473 112 PB30-45 Oil Control Felt 2.6247 130801027 66347 47754 PB30-47 K06114 Air Inlet Swivel Spring 2.9560 410221300 66360 61952

86852212 TD30-60 Throttle Valve Stem Guide 21.40

61 410221270 66361 43761 3360 TD30-61 Throttle Valve 30.8563 130801030 66363 44007 1821 TD30-63 Throttle Valve Spring 3.2864 410221790 66364 47995 TD30-64 Screw Bushing 35.82800 41020187C Muffl er 186.35

Toku TRC-30 Trench Digger



Toku TCD-30 Clay Digger

21

29

3231

30

40

39

3433

11D

28

44AB

1

25

80019

52

53

54

45

20

3847

36

3735

51

18D17D

15D

14D

IIndex Tamco Harper Thor APT Jet Kent Description List Price1 410201010 66301 43026 PB30-01 K06145 Cylinder 672.3511D 410211480 66302 43041 3748 CD30-11 Back Head 815.8911DC 41021148A 66367 43045 CD30-53 K06144 Back Head Complete 973.3614D 130401031 66312 71683

43056213 CD30-14D K0239 Throttle Valve Stem 19.82

15D 410221300 66315 86852 212 K02040 Throttle Valve Stem Guide 21.4017D 410211120 66317 61963 210 CD30-15D K06109 Lever 42.7518D 130401030 66318 61964 211 CD30-17D K02041 Lever Pin 5.6319 410211770 CD30-18D K01293 Oil Plug (NPTF 1/2”) 6.0620 134903001*** 66920 68073 PB30-19 Oil Control Plug (PP-2PT 1/8”) 2.4521 410201530 66321 43783 3143 PB30-18 K01283 Front Head 321.1621CP 41020153D 66369 3143 KBM06146 Front Head Complete

(Incl. 21,28,29,30,31,32,33,34)570.14

25 134201012 66325 49019 PB30-21 K00694 Nylon Nut (UNF 1/2”) 2.3528 410201610 66328 43784 893 K01137 Steel Retainer 35.7129 410201621 66329 43787 PB30-23 Steel Retainer Bolt 30.8530 134601016*** PB30-25 K00520 Nylon Nut (UNF 5/8”) 10.9731 131301116 66924 46897 PB30-28 K09847 Spring Washer M16 .7732 410201640 66332 43786 PB30-29 K00667 Steel Retainer Bolt Bushing 11.3633 410201650 66333 43788 207 PB30-30 K02034 Steel Retainer Plunger 5.5734 130801028 66334 43785 TS-50101 K02033 Steel Retainer Spring 6.5035 410201370 66335 43791 1816 PB30-20 K06116 Air Inlet Swivel 52.6936 410201390 66336 43792 1815 PB30-35 K06113 Air Inlet Swivel Nut 39.2637 131103014 66346 91108 1814 PB30-36 K02278 O-Ring (S-16) .8738 136801005 66338 43044 1827 PB30-37 K02043 Air Inlet Screen 4.1539 410201540 66339 47947 PB30-36 Front Head Bolt 14.3140 134201012 66340 91126 PB30-37 K00694 Nylon Nut (UNF 1/2”) 2.3544A 410201570 66343 43024 191 K01280 Front Head Bushing 7/8” 78.7944B 410205570 66344 43025 192 PB30-38 K01282 Front Head Bushing 1” 78.7945 136101011*** 66945 43473 112 Oil Control Felt 2.6247 130801027 66347 47754 1817 PB30-38 K06114 Air Inlet Swivel Spring 2.9551 410211280 66351 80361 214 PB30-45 K02038 Throttle Valve Bushing 41.2852 410211270 66352 43050 PB30-47 K02036 Throttle Valve 28.3953 130801032 66353 2502 215 CD30-51 K05204 Throttle Valve Spring 2.1854 410211770 CD30-52 K01143 Valve Cap (NPT 1/2”) 6.06800 41020187C Muffl er 186.35





13

20

16

14

15

48

45

49

24 25

11

19

17

1810

75

46

8

3

1

44

21

3334

28

29

23

3031

32

39

40

R

R

R

Old Style

Toku TCD-20 Clay DiggerIIndex Tamco Harper Thor Jet Description List Price

1 410207010 62251 43763 CD20-1 Cylinder 715.813 410207040 62253 43762 CD20-3 Piston 78.794 410207150 62254 43764 CD20-4 Valve 43.465 410207190 62255 43766 CD20-5 Valve Chest 58.366 410207170 62256 43765 CD20-6 Valve Seat 27.857 410207200 62257 43767 CD20-7 Valve Guide 63.678 130401025 66308 43043 CD20-8 Valve Chest Dowel Pin 1.8610 130801023 66310 43042 CD20-10 Plunger Spring 4.3211 410207480 62261 43771 CD20-11 Back Head 206.8213R 130505036^ Polyurethane Ball 9/16” Retro 8.7914 410207270 62252 43772 CD20-14 Throttle Valve 30.2514R 410207E00^ Throttle Pin 20.3115 410221300 62258 86852 CD20-15 Throttle Valve Stem Guide 21.4016 130801024 CD20-16 Throttle Valve Spring 2.0216R 130801030^ Throttle Valve Spring 3.2817 410207120 62262 61963 CD20-17 Lever 40.8418 130401024 62259 71840 CD20-18 Lever Pin 1.6419 410211770 CD20-19 Oil Plug 6.0620 134904004 CD20-20 GD Plug (NPTF 1/2”) 5.1921 410201530 66321 43783

43753CD20-21 Front Head 321.16

23 410207500 62260 CD20-23 Back Head Bolt 23.9224 131313114 62217 43758 CD20-24 Conical Spring Washer M14 .9925 134201015 62218 43756 CD20-25 Back Head Bolt Nut 3.4428 410201610 66328 43784 CD20-28 Steel Retainer 35.7129 410201621 66329 43787 CD20-29 Steel Retainer Bolt 30.8530 134601016 66330 43790 CD20-30 Nylon Nut 10.9731 131301116 66331 43143 CD20-31 Spring Washer M16 .7732 410201640 66332 43786 CD20-32 Steel Retainer Bolt Bushing 11.3633 410201650 66333 43788 CD20-33 Steel Retainer Plunger 5.5734 130801028 66334 43785

43754CD20-34 Steel Retainer Spring 6.50

39 410201540 66339 47947 CD20-39 Front Head Bolt 14.3140 134201012 66340 91126

43759CD20-40 Nylon Nut (UNF 1/2”) 2.35

44 410207570 62263 43746 CD20-44 Front Head Bushing 66.5645 136101011 66345 43473 CD20-45 Oil Control Felt 2.6248 134903001 66320 CD20-48 GDL Plug (NPTF 1/8”) 2.4549 410207360 62250 CD20-49 Air Inlet 22.33800 41020787G Muffl er 186.35

^ Retro fi t parts 14R, 16R, and 22R can be used in place of set 14/16. Please see schematic.


Toku TS-55 Rock Drill

3532

33 3430

36 37 31B31A

25F

26A26D

2725

26B 26C

2829

38D 38B38C

38E

16 1517

1823

24

1920

1B

21

22

11C11B

10A10B

4A

4C 4B

3

56

12C 12B12A

14 13

38A1C9

7B8

7C7A

1A

10B

10A11B

11A

Toku TS-55 Rock DrillIIndex Tamco Harper Jet Description List Price1 430301A0B Back Head (Complete) 500.301A 67564 Back Head (Bare) - Old# 430301A001B 67540 Back Head Bushing - Old# 430301A101C 67502 Throttle Valve - Old# 430301A503 430301A50 67503 RD60-03 Throttle Valve Handle 72.074A 131503021 67504 RD60-04A Throttle Valve Handle Bolt 23.924B 131303028 67541 RD60-04B Spring Washer .774C 134203008 67542 RD60-04C Hex Nut 3.935 430301M80 67505 RD60-05 Detent Plunger 5.846 130803035 67506 RD60-06 Detent Spring 4.157A 430306B10 67507 RD60-07A Air Connection Tube 84.857B 430301B20 67543 RD60-07B Air Connection Clamp 8.417C 131101023 67544 RD60-07C O-Ring 3.068 430301B30 67508 RD60-08 Air Connection Nut 55.599 430301B50 67509 RD60-09 Air Connection Washer 9.3410A 136603008 67510 RD60-10B Grip Handle 13.2210B 430301C50 RD60-10C Grip Handle Pipe 16.2111A 131503022 67511 RD60-11A Handle Bolt 19.4911B 131307016 67545 RD60-11B Washer 3.0611C 134411016 67546 RD60-11C Hex Nut 5.6312A 430301J41 67512 RD60-12A Blow Tube 24.7912B 430301J71 67547 RD60-12B Blow Tube Washer 6.7212C 136303015 67548 RD60-12C Blow Tube Rubber 4.2613 430301J50 67513 RD60-13 Blow Tube Gland 63.1214 430301J60 67514 RD60-14 Blow Tube Gasket 6.7215 430301F80 67515 RD60-15 Valve 65.2516 430301G10 67516 RD60-16 Valve Chest (Front) 58.2117 430301G00 67517 RD60-17 Valve Chest (Rear) 106.3118 430301G40 67518 RD60-18 Valve Plug 82.9419 430301H00 67519 RD60-19 Rifl e Bar 220.8520 430301H20 67520 RD60-20 Rotation Pawl (Non Reversible) 22.9821 430301H30 67521 RD60-21 Pawl Plunger 8.4722 130803036 67522 RD60-22 Pawl Spring 3.4423 430301G70 67523 RD60-23 Ratchet Ring 52.8524 130403031 67524 RD60-24 Ratchet Ring Dowel Pin 2.7425 430301C8B 67525 RD60-25A Cylinder 1041.0125F 430301D10 67549 RD60-25B Cylinder Bushing 122.6926A 430301P70 67526 RD60-26A Exhaust Control Valve 98.1126B 130803037 67550 RD60-26B Exhaust Control Spring 4.9226C 131309020 67551 RD60-26C Washer 4.2626D 430301P90 67552 RD60-26D Exhaust Control Pin 9.2927 430301R5A 67527 RD60-27 Filler Plug (w / Chain) 42.8628 430301E50 67528 Piston (w/o Groove) 300.63

430301E60 RD60-28 Piston (w/ Groove) 300.7429 430301H10 67529 RD60-29 Rifl e Nut 121.2130 430301W60 Front Head (Short) 638.55

430306W70 67553 RD60-30 Front Head (Long) 651.4931A 430301H50 Rotation Sleeve (Short) 236.42

430306H60 67554 RD60-31A Rotation Sleeve (Long) 243.5731B 430301H70 Sleeve Bushing 7/8” (Short) 75.78

430306H80 67557 RD60-31C Sleeve Bushing 1” (Long) 75.13430302H80 67556 RD60-31B Sleeve Bushing 7/8” (Long) 75.13

32 430301L20 67532 RD60-32 Steel Puller 95.1233 430301M40 67533 RD60-33 Steel Puller Pivot 16.9834 130803038 67534 RD60-34 Steel Puller Spring 5.4635 430301M5A 67535 RD60-35 Steel Puller Yoke 58.7536 130803039 67536 RD60-36 Steel Puller Yoke Spring 7.3737 430301M30 67537 RD60-37A Steel Puller Yoke Nut (2 Piece Set) 9.7238A 430301W00 67538 RD60-38A Through Bolt 42.8138B 131303048 67559 RD60-38B Spring Washer 1.1438C 134203009 67560 RD60-38C Through Bolt Nut (Long) 7.2138D 134203010 67561 RD60-38D Through Bolt Nut (Short) 4.3238E 430301R90 67562 RD60-38E Spacer Ring 10.54


Toku TJ-20 Rock Drill

3435

37

39

4140

33

33

17C

119

1012

132

1

111B111C

110A

110B

110B

110A

111D

111A

17D

5657

5554

52

6

3

87

18

18E

28

2722

20

21

2326

29B30

29A24

45

58

39

3837

3435

4140

36

31B

31A

140

17A

Toku TJ-20 Rock DrillIIndex Tamco Description List Price

1 430120A0B Back Head CP 336.942 430126A41 Throttle Valve 90.253 430126A50 Throttle Valve Handle 75.954 430160A60 Throttle Valve Plunger 8.795 130803011 Throttle Valve Spring 2.526 430101A70 Throttle Valve Bolt 10.927 134401010 Throttle Valve Nut (M10) 1.588 131301010 Spring Washer .779 430101B00 Air Connection Tube (PT) 46.25

430106B10 Air Connection Tube (NPT) 46.2510 430101B31 Air Connection Nut 43.4611 131101023 Air Connection O-Ring (P-24) 3.0612 131101030 Air Connection O-Ring (P-30) 3.0613 130803004 Air Connection Clamp 2.4517 430120B7D Grip Handle Ass’l (Incl. 17A, 17C, and 17D) 151.9517A Handle Support (R) - Old# 13660300517C Center Grip Handle - Old# 430126B7A17D 430126B7A Grip Handle Support CP 100.8018 430120C8F Cylinder CP (Incl. 18A and 18E) 434.3518A Cylinder - Old# 430120C8118E Cylinder Bushing - Old# 430126D1020 430126F80 Valve 77.3721 430126F90 Valve Cheat 185.6422 430126G20 Valve Guide 167.0223 130403011 Valve Knock Pin 4.7 x 53 3.9324 430126G60 Ratchet 78.8926 430126H01 Rifl e Bar 187.6627 430126H10 Rifl e Nut 75.4628 430126E50 Piston (w/o Groove) 199.30

430126E60 Piston (w/ Groove) 199.3029A 430160H20 Rotation Pawl (Reversible) 21.7429B 136303002 Pawl Plunger 6.1730 130803006 Pawl Spring 2.7431 430127H6D Rotation Sleeve (L) CP (7/8” x 4-1/4”) 217.91

430126H5C Rotation Sleeve (S) CP (7/8” x 3-1/4”) 213.6531A Rotation Sleeve (L) (7/8” x 4-1/4”) Old# 430127H60

Rotation Sleeve (S) (7/8” x 3-1/4”) Old# 430126H5031B Rotation Sleeve (L) (7/8” x 4-1/4”) Old# 430127H80

Rotation Sleeve (S) (7/8” x 3-1/4”) Old# 430126H7033 131503005 Through Bolt 16.1634 430126W10 Through Bolt Nut 10.9235 131301014 Spring Washer M14 1.0436 430127W70 Front Head (L) (7/8” x 4-1/4”) 544.80

430126W60 Front Head (S) (7/8” x 3-1/4”) 508.9237 430126W80 Front Head Bushing 67.3838 430126K90 Steel Holder 119.3039 430126L00 Steel Holder Bolt 23.9240 134203004 Steel Holder Nut 5.9041 130803010 Steel Holder Spring 8.3052 430126J50 Blow Tube Grand 52.9754 131101027 Blow Tube Grand O-Ring P-28 2.7455 430126J40 Blow Tube 34.8456 136103020 Blow Tube Rubber Packing 4.4257 430126J71 Tube Washer 5.6858 136303004 Blow Port Connection 15.34110 430301B7A Grip Handle CP (Incl. 110A and 110B) 38.22110A 136603008 Grip Handle 13.22110B 430301C50 Grip Handle Pipe 16.21111A 131503006 Handle Bolt 23.54111B 131307016 Handle Washer M16 3.06111C 134501016 U Nut M16 6.60111D 430101C40 Grip Handle Washer (L) 12.83


Toku TJ-15 Rock Drill

19

4638

3937

4140 36

2

3

5

4

6

87

910

1311

12

18

202122

23

24

25

26

2728

30 29B

29A

31A32

34

35

33

14

16A17

16B

116B

1716A

15

Toku TJ-15 Rock DrillIIndex Tamco Harper Jet Kent Description List Price

1 430101A00 67001 RD30-01 Back Head 166.252 430101A40 67002 RD30-02 Throttle Valve 74.533 430101A50 67003 RD30-03 K18620 Throttle Valve Handle 98.064 130403002 67004 RD30-04 K18611 Throttle Vave Plunger 5.575 130803001 67005 RD30-05 K18612 Throttle Valve Spring 2.626 430101A70 67006 RD30-06 Throttle Valve Bolt 10.927 134401010 67007 RD30-07 Throttle Valve Nut M10 P1.5 1.588 131301010 67008 RD30-08 Spring Washer M10 .779 430106B10 67009 RD30-09 K18625 Air Connection Tube NPT 46.25(9) 430101B00 Air Connection Tube PT 46.2510 430101B31 67010 RD30-10 K18626 Air Connection Nut 43.4611 131101023 67011 RD30-11 Air Connection O-Ring (P-24) 3.0612 131101030 67054 RD30-12 K18628 Air Connection O-Ring (P-30) 3.0613 130803004 67013 RD30-13 K18627 Air Connection Clamp 2.4514 131503002 67014 RD30-14 Handle Bolt 23.9215 134501016 67015 RD30-15 Handle Nut (U-Nut) M16 6.6016A 131307016 67016 RD30-16A Handle Washer M16 3.0616B 430101C40 67050 RD30-16B Grip Handle Washer (H Collar) 12.8317 430101B7A 67017 RD30-17 Handle Grip CP (Includes 17A / 17B) 38.2217A 430101B7A Handle Grip (Old# 136603001)17B 430101B7A Handle Grip Pipe (Old#430101C50)18 430101C80 67018 RD30-18 Cylinder 355.3919 430101P60 67019 RD30-19 Exhaust Cap 15.7220 430101F80 67020 RD30-20 K18608 Valve 56.7821 430101F9B 67021 RD30-21 Valve Chest CP 296.9222 430101G20 67022 RD30-22 K18607 Valve Guide 157.5823 130403001 67023 RD30-23 K18610 Valve Knock 2.7424 430101G60 67024 RD30-24 Ratchet 70.2725 130409001 67025 RD30-25 Ratchet Key 3.2826 430101H01 67026 RD30-26A Rifl e Bar (P) 184.9827 430101H10 67027 RD30-27 Rifl e Nut 72.5628 430101E50 67028 RD30-28 Piston 192.8529A 430101H20 67029 RD30-29 K18615 Rotation Pawl (Reversible) 16.5529B 136303002 67053 RD30-30B Pawl Plunger (P) 6.1730 130803006 67052 RD30-30A K18616 Pawl Plunger Spring (P) 2.7431A 430101H50 Rotation Sleeve, 3-1/4” 160.2032 430102H70 Sleeve Bushing, 7/8” x 3-1/4” 78.52CP31B 430102H5A RD30-31A Rotation Sleeve CP 7/8” x 3-1/4” 256.67CP31D 430107H6A RD30-31 Rotation Sleeve CP 7/8” x 4-1/4” 265.1433 131503001 67033 RD30-33 Through Bolt 28.0134 430101W10 67034 RD30-34 Through Bolt Nut 7.9835 131303032 67035 RD30-35 Through Bolt Washer W 1/2 .7736S 430101W60 67036 RD30-36A K18632 Front Head Short 356.9836L 430106W70 Front Head Long 369.2637 430101W80 67037 RD30-37 K18634 Front Head Bushing 35.00

430102H70 Bushing Only - 7/8” x 3-1/4”38L 430102K90 67038 RD30-38 K18635 Steel Holder 7/8” 134.9739 430101L00 67039 RD30-39 K17513 Steel Holder Bolt 28.3940 134203001 67040 RD30-40 K17514 Steel Holder Nut 6.0141 130803003 67041 RD30-41 K18637 Steel Holder Spring 9.8346 430101V0J Oiler 199.30


Toku THD-1100N Rock Drill

Toku THD-1100N Rock DrillIIndex Tamco Jet Description List Price

1 Y10103010 Y10103010 Handle 371.18Y1010301A Y1010301A Handle CP 504.77

2 Y10103020 Y10103020 Throttle Valve Bushing 24.413 Y10103030 Y10103030 Push Rod 10.654 Y10103040 SB-1/2 Valve Ball 10.655 Y10601070 Y10601070 Inlet Valve Spring 5.846 Y10106060 Y10106060 Inlet Adapter NPT 3/8” 26.597 Y1010307A Y1010307A Throttle Lever 53.078 Y10103080 Y10103080 Spring Pin 6 x 24 2.6713 Y10101140 Y10101140 O-Ring P-49 2.8114 Y10103140 Y10103140 Valve Chest 169.6415 Y10103150 Y10103150 Valve Knock Pin 5 x 20 5.2916 Y10103160 Y10103160 Valve 21.2417 Y10103170 Y10103170 Valve Seat 137.8618 Y10113180 Y10103180 Cylinder 305.4419 Y10103190 Y10103190 Piston 291.6220 Y10113200 Y10103200 Rachet Ring 124.1721 Y10103210 Y10103210 Rotation Pawl (Non Reversible) 21.2422 Y10103220 Y10103220 Pawl Spring 5.2923 Y10113230 Y10103230 Guide Nut 107.5724 Y10113240 Y10106240 Chuck 212.1225 Y10113250 Y10106250 Front Cover 293.7526 Y10106260 Y10106260 Closed Retainer 159.1127 Y10106270 Y10106270 O-Ring P-42 20.1428 Y10103280 Y10103280 Through Bolt 23.3729 Y10103290 TS-1561071 Lock Washer .6030 Y10103300 Y10103300 Hex Nut 1.6431 Y10103310 Y10103310 Nut 5.2932 Y10103350 Y10103350 Washer Sup-2 14.3633 Y10106330 Y10106330 Valve Ring 13.27

Toku THD-1100U Rock Drill

Toku THD-1100U Rock DrillIIndex Tamco Jet Description List Price

1 Y10103010 Y10103010 Handle 371.18Y1010301A Y1010301A Handle CP 504.77

2 Y10103020 Y10103020 Throttle Valve Bushing 24.413 Y10103030 Y10103030 Push Rod 10.654 Y10103040 SB-1/2 Valve Ball 10.655 Y10601070 Y10601070 Inlet Valve Spring 5.846 Y10106060 Y10106060 Inlet Adapter NPT 3/8” 26.597 Y1010307A Y1010307A Throttle Lever 53.078 Y10103080 Y10103080 Spring Pin 6 x 24 2.6713 Y10101140 Y10101140 O-Ring P-49 2.8114 Y10103140 Y10103140 Valve Chest 169.6415 Y10103150 Y10103150 Valve Knock Pin 5 x 20 5.2916 Y10103160 Y10103160 Valve 21.2417 Y10103170 Y10103170 Valve Seat 137.8618 Y10113180 Y10103180 Cylinder 305.4419 Y10103190 Y10103190 Piston 291.6220 Y10103200 Y10103200 Rachet Ring 124.1721 Y10103210 Y10103210 Rotation Pawl (Non Reversible) 21.2422 Y10103220 Y10103220 Pawl Spring 5.2923 Y10103230 Y10103230 Guide Nut 107.5724 Y10106240 Y10106240 Chuck 212.12

Y1010624A Y1010624A Chuck CP 371.1825 Y10106250 Y10106250 Front Cover **Discontinued** 279.7226 Y10106260 Y10106260 Closed Retainer 159.1127 Y10106270 Y10106270 O-Ring P-42 20.1428 Y10103280 Y10103280 Through Bolt 23.3729 Y10103290 TS-1561071 Lock Washer .6030 Y10103300 Y10103300 Hex Nut 1.6431 Y10103310 Y10103310 Nut 5.2932 Y10103350 Y10103350 Washer Sup-2 14.3633 Y10106330 Y10106330 Valve Ring 13.27


Toku TH-800 Rock Drill

Toku TH-800 Rock DrillIIndex Tamco Harper Jet Description List Price

1 430430A00 67101 RD7-01 Handle 256.672 430430D50 67109 RD7-09 Throttle Valve Bushing 22.063 430430N00 67110 RD7-10 Plunger Bushing 21.794 430430D40 67102 RD7-02 Lever (Throttle Lever) 33.035 130606025 67103 RD7-03 Cylinder Pin 6 x 25 2.576 134901003 67104 RD7-04 Hex Socket Head Plug PP-2 PT 3/8” 6.017 136303011 67105 RD7-05 Lubricator Felt 5.148 430430D60 67107 RD7-06 Throttle Valve 28.019 131108009 67108 RD7-08 O-Ring P-10A HS90 2.0210 131101020 O-Ring P-22 2.4511 430430M60 67111 RD7-11 Inlet Adaptor 45.8112 130803062 67112 RD7-12 Valve Spring 2.7431 430432C40 67142 RD7-13 Valve Chest 120.4533 430432C00 67141 RD7-15 Valve 47.3434 430432C2B 67145 RD7-16 Valve Seat (w/Plug) 120.4535 130605008 67144 RD7-14 Spring Pin 5 x 8 1.3636 430432C10 67143 Valve Guide 17.2543 430430D00 67146 RD7-17 Cylinder 213.6544 430430R70 67118 RD7-18 Piston 199.3051 430442K40 67121 RD7-21 Rachet Ring 101.8352 430430K50 67126 RD7-26 Rotation Pawl (Reversible) 21.5753 430432N20 67138 RD7-26A Pawl Plunger 4.7554 130803075 67125 RD7-25 Pawl Spring 3.0655 430430L00 67122 RD7-22 Guide Nut 83.1156 430432E90 67123 RD7-23 Chuck 256.6757 430432L90 67131 Steel Ball (M6) 1.4858 130409011 67136 Retainer Key 5.6359 130803065 67139 RD7-28F Retainer Spring Ring (Front) 7.1660 130803064 67129 RD7-29R Retainer Spring Ring (Rear) 3.1761 430430L20 67128 RD7-28 Thrust Ring 6.0162 130803066 67130 RD7-30 Retainer Spring 16.5563 430430E5B RD7-20 Front Cover CP 184.9864 430430P20 67127 RD7-27 Steel Retainer (Ball Type) 50.1368 131503041 67132 RD7-32 Through Bolt 21.4669 134203012 67134 RD7-33 Side Rod Nut 11.5270 131301008 67133 RD7-34 Spring Washer M8 1.48


CP-9A Rock Drill

CP-9A Rock Drill

IIndex Tamco Description List Price1 F-816122 Piston 125.854 F-816120 Front Head 281.635 F-061888 Retainer Ball Plug 2.407 F-034249 Side Rod Bolt 28.519 R-085897 Main Valve 68.6911 R-085896 Rear Valve Seat 85.4513 R-085898 Front Valve seat 58.7015 F-826683 Retainer Plate 39.0020 R-051356 Cylinder Bushing 88.8421 F-826892 Chuck 135.8423 R-085900 Chuck Sleeve 68.2625 R-085886 Cylinder 246.4127 F-816123 Ratchet Ring 43.5830 R-051355 Pawl 15.9431 R-086605 Retainer Sleeve Spring 1.7533 R-085890 Pawl Spring 3.9835 F-826893 Retainer Snap Ring 15.1241 R-085893 Inlet Bushing 6.5543 F-027853 Throttle Lever 30.1945 R-085895 Oil Chamber Felt 2.2447 R-085596 Throttle Valve Spring 1.5849 R-075404 Throttle Lever Pin 1.9751 F-034495 Handle Incomplete 355.6753 F-815426 Throttle Valve Stem Bushing 9.7857 C-077941 Oil Plug 2.5765 F-815566 Retainer 66.5667 F-815343 Dust Excluder 9.5471 F-035621 Steel Retainer Ball 1.9773 SB-0175 Chuck Retaining Ball (7/32”) .4975 S-013073 Side Rod Bolt Nut 3.3377 R-086098 Throttle Valve O-Ring 1.3179 R-051351 Plunger Shifter 26.1081 R-051352 Plunger Shifter Detent 10.3883 F-816124 Shifter Sleeve 51.8185 R-051353 Detent Spring 3.1786 C-102507 Detent Plug 2.3087 R-086329 Throttle Valve Stem Bushing 23.32- F-815448 Muffl er 325.25- F-034496 Handle Complete 330.12


Toku THA-1,2,3,4 Chipping Hammer

Toku THA-1,2,3,4 Chipping HammerIIndex Tamco Harper Jet Description List Price

1 Y10270010 Handle (Bare) N/AY1027001A Handle CP (No. 1-10) 436.80

2 Y10212020 S729564 21A100200 Lever 20.973A Y10212030 S729570 21A1003A0 Roll Pin 6 x 20 .933B Y30104030 S729563 21A1003B0 Roll Pin 5 x 20 N/A4A Y10212050 S729559

6050421A1004A0 Throttle Valve 10.65

4B Y10212060 S729304 21A1004B0 Throttle O-Ring P-7 1.315 Y10212070 HH-603 21A100500 Throttle Valve Bushing 16.066 Y10301070 S729558 21A100600 Throttle Valve Spring 1.917 Y10212090 S729557 21A100700 Throttle Valve Cap 9.178 Y10212100 S729561

S729561HARP21A100800 Push Rod

Push Rod for Harper and Toku5.68

9 Y10212110 60509 21A100900 Push Rod Sleeve 9.7210 Y10212120 21A10100 Screw Bushing NPT 12.3411 Y10246140 60537 21A11300 Ring Valve 36.4212 Y10270120 Plate Valve 18.6813 Y10270130 Valve Seat 9.3914 Y10274140 Cylinder THA-1B N/A

Y10276140 Cylinder THA-2B N/AY10270140 Cylinder THA-3B N/AY10278140 Cylinder THA-4B N/A

15 Y10212320 4179 21A103200 O-Ring P-50 3.6116 Y10212210 60520 21A102000 Piston THA-1B 25.77

Y10214210 S729572 21A202200 Piston THA-2B 25.77Y10216210 S729573 21A302000 Piston THA-3B 25.77Y10218210 S729574 21A402000 Piston THA-4B 25.77

17 Y10270170 Clutch 47.2918 Y30112200 Exhaust Band 28.4419H Y1021224H S729586 21A1021H0 Shank Bushing (Hex) 20.5319R Y1021224R S729585 21A1021R0 Shank Bushing (Round) 20.5320 T25119002 S729583

T2511900221A122900 Retainer 49.41

21 Y10212300 S729584 21A123000 Retainer Spring 1.58


Toku THH-1,2,3,4 Chipping Hammer

Toku THH-1,2,3,4 Chipping HammerIIndex Tamco Harper Jet Description List Price

Y1021201ASO Handle Complete 319.25Y10212010 21A100100 Handle Bare N/A

1 Y1021201B Handle (with Throttle Valve Bushing) N/A2 Y10212020 S729564 21A100200 Lever 20.973A Y10212030 S729570 21A1003A0 Lever Pin 6 x 20 .933B Y30104030 S729563 21A1003B0 Lever Pin 5 x 20 .994A Y10212050 S729559, 60504 21A1004A0 Throttle Valve (has O-Ring on it) 10.654B Y10212060 S729304 21A1004B0 Throttle Valve O-Ring 1.315 Y10212070 HH-603 21A100500 Throttle Valve Bushing 16.066 Y10301070 S729558 21A100600 Throttle Valve Spring 1.917 Y10212090 S729557 21A100700 Throttle Valve Cap 9.178 Y10212100 S729561

S729561HARP21A100800 Push Rod

Push Rod for Harper and Toku5.68

9 Y10212110 60509 21A100900 Push Rod Sleeve 9.7210 Y30101120 S729562 21A10100 Screw Bushing 12.3412 Y10212150 S729567 Sim Plate Valve 8.5713 Y10246140 60537 21A11300 Ring Valve (Ring Valve Type) 36.4214 Y10246150 60536 21A11400 Ring Valve Plate (Ring Valve Type) 14.3615 Y10212160 S729566 Valve Seat (Rear) 42.3716 Y10212170 S729568 Valve Seat (Middle) 15.5117 Y10212180 S729569 Valve Seat (Front) 21.1818 Y10212190 S729571 Valve Knock 2.3519B Y1021220L 60519 21A141900 Cylinder for THH-1B (Ring Valve) 242.2619A Y10212200 Cylinder for THH-1B (Sim Plate) 227.9619B Y1021420L S729575 21A241900 Cylinder for THH-2B (Ring Valve) 270.9819A Y10214200 Cylinder for THH-2B (Sim Plate) 242.2619B Y1021620L S729576 21A341900 Cylinder for THH-3B (Ring Valve) 285.2819A Y10216200 Cylinder for THH-3B (Sim Plate) 242.2619B Y1021820L S729577 21A441900 Cylinder for THH-4B (Ring Valve) 299.6419A Y10218200 Cylinder for THH-4B (Sim Plate) 242.2620 Y10212210 60520 21A102000 Piston for THH-1B 25.77

Y10214210 S729572 21A202200 Piston for THH-2B 25.77Y10216210 S729573 21A302000 Piston for THH-3B 25.77Y10218210 S729574 21A402000 Piston for THH-4B 25.77

21 Y1021224H S729586 21A1021H0 Shank Bushing (Hex) 20.53Y1021224R S729585 21A1021R0 Shank Bushing (Round) 20.53

23 Y10212250 S729581 21A102300 Clutch 31.5028 Y10212260 BHH-85 21A102800 Exhaust Band 22.8829 T25119002 S729583

T2511900221A122900 Retainer (Old Part# Y10212290) 49.41

30 Y10212300 S729584 21A123000 Retainer Spring 1.5832 Y10212320 4179 21A103200 Cylinder O-Ring 9-50 3.61


Toku TCH-2,3,4 Chipping Hammer

IIndex Tamco Kent Description List Price1-2 Y10430010 K04193 Cylinder for TCH-2 230.631-3 Y10450010 K04194 Cylinder for TCH-3 230.631-4 Y10470010 K04195 Cylinder for TCH-4 230.632 Y10430020 K04196 Flange Bumper Ring 8.253-2 Y10430030 K04273 Piston for TCH-2 28.013-3 Y10450030 K04274 Piston for TCH-3 28.013-4 Y10470030 K04275 Piston for TCH-4 28.014 Y10103080 K04197 Spring Pin 6 x 24 2.675 Y10430050 K04198 Bumper Valve Seat 6.826 Y10430060 K04199 Valve Spacer 43.367 Y10212150 K04229 Valve 8.579 Y10430090 K04231 Hex Socket Plug GDL 1/8 -27 1.7010 Y10430100 K04235 Handle 249.4611 Y10601110 K04236 Lever 24.9512 Y10430120 K04237 Throttle Valve Bushing 14.4113 Y10430130 K04238 O-Ring AS568-203 2.3514 Y10430140 K04239 Throttle Valve 25.1215 Y10430150 K04241 Throttle Valve Spring 3.9316 Y10430160 K04242 O-Ring G-25 1.2117 Y10430170 K04246 Air Inlet 15.8918 Y10430180 K04243 Flange 88.0219 Y10430190 K04244 Handle Hex Bolt 11T (M12 x 80) 3.1119B Y1043019B K04256 Spring Washer (25 x 12.2 x 1.5) 1.2120 Y10430200 K04247 Bumper Washer 4.1022 Y10430220 K04215 Handle Bolt Spacer 7.7023 Y10430230 K04248 Handle Bolt Nut M12 2.6725 Y10430250 K04249 Exhaust 39.4328 T25119002 K04173 Body Retainer 49.4134 Y10212300 K02428 Lock Coil Spring 1.5844H Y1021224H K04170 Shank Bushing (Hex) 20.5344R Y1021224R K04165 Shank Bushing (Round) 20.53

Toku TCH-2,3,4 Chipping Hammer

*Handle Thread = 3/4” -14” Straight Pipe*


Toku THH-6,7,8,9 Chipping Hammer

Toku THH-6,7,8,9 Chipping HammerIIndex Tamco Jet Description List Price

1 Y10219010 12A100010 Handle N/A1A Y1021901A Handle Complete 494.142 Y1062002A 22A90002A Lever 38.663 Y10620030 22A900003 Roll Pin 6 x 28 1.484 Y10620040 22A900004 Push Rod 12.625 Y31110030 22A900005 O-Ring P-9 .996 Y10601050 22A900006 Inlet Valve 18.957 Y10620070 22A900007 Inlet Valve Rod 17.208 Y10620080 22A900008 Inlet Valve Spring 4.539 Y10219090 22A900010 Lock Washer 3.3910 Y1021910A 12A100100 Screw Bushing 20.2611 Y10219110 12A100110 Back Head Bolt 28.0112 Y10219120 12A100120 Washer 1.4813 Y10219130 12A100130 Back Head 43.8514 Y10219140 12A100140 Cylinder THH-6B 230.63

Y10221140 12A200140 Cylinder THH-7B 230.63Y10223140 12A300140 Cylinder THH-8B 230.63Y10225140 12A400140 Cylinder THH-9B 230.63

15A Y1021915H 12A10015H Plate (H) 2.4515B Y1021915L 12A10015L Plate (L) 2.4516 Y10219160 12A100160 Valve Cover 28.0117 Y10219170 12A100170 O-Ring S-56 3.9318 Y10219180 12A100180 Valve Box 47.7319 Y10219190 12A100190 Valve 31.8920 Y10219200 12A100200 Cylinder Knock Pin 6 x 8 2.4521 Y10219210 12A100210 Valve Knock Pin 6 x 12 2.4522 Y10219220 12A100220 Exhaust Cover (Upper) 24.6823 Y10219230 12A100230 Exhaust Cover (Lower for THH-6B, 7B) 59.74

Y10223230 12A300230 Exhaust Cover (Lower for THH-8B, 9B) 59.7424 Y10219240 12A100240 Piston for THH-6B 28.01

Y10221240 12A200240 Piston for THH-7B 28.01Y10223240 12A300240 Piston for THH-8B 28.01Y10225240 12A400240 Piston for THH-9B 28.01

25 Y1021925H 21A1021H0 Shank Bushing (Hex) 21.08Y1021925R 21A1021R0 Shank Bushing (Round) 19.93

26 Y10212300 557912 Retainer Spring 1.5827 T25119002 557911 Retainer (Old part# Y10212290) 49.4128 Y10219280 12A100280 Ring 16.0029 Y1021929A Y10219290 Set Screw 2.18

T25129103 Deluxe Quick Change Retainer 121.11


Toku AA-0S Chipping Hammer

Toku AA-0S Chipping HammerIIndex Tamco Description List Price

1 Y10298010 Handle 194.271A Y1029801A Handle Complete 288.182 Y10301020 Lever 20.483 Y10301030 Spring Pin 5 x 18 1.974 Y10301050 Throttle Valve 13.595 Y10301040 Throttle Valve Bushing 21.406 Y10301070 Throttle Valve Spring 1.917 Y10301080 Throttle Valve Cap 8.798 Y10301090 Push Rod 6.829 Y10301100 Push Rod Sleeve 13.5910A Y1029810A Screw Bushing 1/4” x 3/8” 16.6511 Y10298110 Handle Washer 5.8412 Y10298120 Valve Upper Seat 35.0013 Y10298130 Valve Center Seat 13.5914 Y10298140 Valve Lower Seat 35.0015 Y31002100 Valve 6.3916 Y10298160 Dowel Pin 5 x 22 2.2417 Y10301180 Clutch Key 4.9218 Y10301190 Exhaust Band 19.4419 Y10298190 Cylinder 233.0820 Y10298200 Piston 16.9821 Y1021224R Shank Bushing (Round) 20.5322 Y1021224H Shank Bushing (Hex) 20.5323 Y10298230 Body Retainer, Oval Collar 87.41

Y10298230R Body Retainer, Round Collar 87.4124 Y10212300 Retainer Spring 1.5825 Y10600360 Spring Washer .99


Toku RB-110 Rivet Buster

1620

17 15 14 12 13

26 27 25 23 24 21 22

18 19

23

1C

1A

1011

7

6

4

8

1B

Toku RB-110 Rivet BusterIIndex Tamco Jet Description List Price

1A 41047001D 41047001B Handle Complete 817.251B 410460060 410460060 Throttle Valve Bushing 63.671C 410460080 410460080 Push Rod Sleeve 13.932 410460040 410460040 Lever 35.603 130401058 130401058 Lever Pin 4 x 21 3.394 410460050 410460050 Throttle Valve 40.846 130801065 130801065 Throttle Valve Spring 3.837 134905019 134905019 Throttle Valve Cap 16.988 130401062 130401062 Throttle Valve Pin 6 x 37.5 3.6110 134704030 134704030 Screw Bushing 1/2” x 3/8” 12.78

SF-01038 3/8” x 24 Thread x 1/2” Hose Barb Swivel 29.8211 134803040 134803040 Hose Stem 3/8” x 1/2” 8.4712 410470100 410470100 Valve 169.2113 410470150 410470150 Valve Case 242.2614 410470140 410470140 Valve Seat 127.6015 130620061 130620061 Spring Pin 3.3316 410470190 410470190 Cylinder 686.7017 410470200 410470200 Piston 100.1918 410470300 410470300 Clutch 156.2719 410460310 410460310 Clutch Band 20.7020 410470320 410470320 Clutch Key 19.9321 410470470 410470470 Exhaust Band 10.3222 410470560 410470560 Piston Stopper 53.7323 T33210300 552103 Lower Sleeve (Old Part# 410470500) 14.9524 T33210100 552101 Upper Sleeve (Old Part# 410470510) 12.0025 T33210400 552104 Rubber Bumper (Old Part# 136301003) 3.0026 T33219001 552191 Retainer (Old Part# 410470360) 99.0527 T33219400 550098 Lock Spring (Old Part# 130801050) 2.30


Toku RB-110D Rivet Buster

8

9

4

2

1A

7

6

1B

32

31

1011

3031C

22212423252726

19181312141517

20 16

Toku RB-110D Rivet BusterIIndex Tamco Jet Description List Price

1 41047101D 41047101D Handle Complete 925.531A 41047101F 41047101F Handle With Bushing 659.031B 410460060 410460060 Throttle Valve Bushing 63.671C 410221300 410221300 Throttle Valve Stem Guide 21.402 410207120 410207120 Lever 40.843 130401030 130401030 Lever Pin 3.969 x 34.6 5.634 410466050 410466050 Throttle Valve 45.986 130801065 130801065 Throttle Valve Spring 3.837 134905019 134905019 Throttle Valve Cap 16.988 410466C10 410466C10 Throttle Valve Pin 13.939 130801066 130801066 Valve Pin Spring 3.6110 134704030 134704030 Screw Bushing 1/2” x 3/8” 12.7811 134803040 134803040 Hose Stem 3/8” x 1/2” 8.47

SF-01038 3/8” x 24 Thread x 1/2” Hose Barb Swivel 29.8212 410470100 410470100 Valve 169.2113 410470150 410470150 Valve Case 242.2614 410470140 410470140 Valve Seat 127.6015 130620061 130620061 Spring Pin 3.3316 410470190 410470190 Cylinder 686.7017 410470200 410470200 Piston 100.1918 410470300 410470300 Clutch 156.2719 410460310 410460310 Clutch Band 20.7020 410470320 410470320 Clutch Key 19.9321 410470470 410470470 Exhaust Band 10.3222 410470560 410470560 Piston Stopper 53.7323 T33210300 552103 Lower Sleeve (Old Part# 410470500) 14.9524 T33210100 552101 Upper Sleeve (Old Part# 410470510) 12.0025 T33210400 552104 Rubber Bumper (Old Part# 136301003) 3.0026 T33219001 552191 Retainer (Old Part# 410470360) 99.0527 T33219400 550098 Lock Spring (Old Part# 130801050) 2.3030 410211770 410211720 Oil Plug NPFT 1/2” 6.0631 136101011 136101011 Oil Control Felt 2.6232 134903001 134903001 Oil Control Plug PP-2 PT 1/8” 2.45


TAMCO RB-90 / RB-91 Rivet Buster

4

1C

1B

8

6

7

1110

3

1A

2

191812B12A12D 12C

22 16 20 1721

TAMCORB-90 / RB-91 Rivet BusterIIndex Tamco Harper Jet Description List Price

1A 41046001B 61101 Handle 741.961B 410460060 61105 410460060 Throttle Valve Bushing 63.671C 410460080 61109 410460080 Push Rod Sleeve 13.932 410460040 61102 410460040 Lever 35.603 130401058 130401058 Lever Pin 3.394 410460050 61104 410460050 Throttle Valve 40.846 130801065 61106 130801065 Throttle Valve Spring 3.837 134905019 61107 134905019 Throttle Vave Cap 16.988 130401056 61108 130401056 Throttle Valve Pin 13.9310 134704030 61110 134704030 Screw Bushing 12.7811 134803040 134803040 Hose Stem 8.4712A 410460100 61112 410460100 Valve 99.2112B 410460150 61113 410460150 Valve Box 169.6412C 410460140 61114 410460140 Valve Seat 132.6212D 130401057 61115 130401057 Valve Knock 4.8616 410464191 61131 410464191 Cylinder for RB-90 (1-7/32”) 757.90

410463191 410463191 Cylinder for RB-91 (1-1/2”) 757.9017 410463200 61117 410463200 Piston 35.5518 410460300 61118 410460300 Clutch 124.1019 410460310 61119 410460310 Clutch Band 20.7020 410460320 61120 410460320 Clutch Key 11.9121 410460470 61121 410460470 Exhaust Band 35.0622 410464560 410464560 Piston Stopper for RB-90 21.18

410463560 Piston Stopper for RB-91 21.18

Tamco / Toku RB-90 Tamco / Toku RB-91T32150200 Small Buster Upper Sleeve 11.36 T33210100 Jumbo Buster Upper Sleeve 12.00T32150400 Small Buster Lower Sleeve 14.20 T33210300 Jumbo Buster Lower Sleeve 14.95T32150500 Small Buster Rubber Bumper 3.17 T33210400 Jumbo Buster Rubber Bumper 3.00T32019400 Small Buster Lock Spring 2.35 T33219400 Jumbo Buster Lock Spring 2.30T32019000 Retainer 85.95 T33219000 Retainer 85.95T32150400S Sm. Buster Lower Split Sleeve 18.02 T33210300S Jumbo Buster Low. Split Sleeve 17.50T32150500PJR Small Buster Poly Bumper 5.51 T33210400PJR Jumbo Buster Poly Bumper 5.30


Toku RB-90D / RB-91D Rivet Buster

2

1A

21 22 16 20 17

7

6

1B

32

31

1011

12C12D 12A 12B 18 19

3031C

8

9

4

Toku RB-90D / RB-91D Rivet BusterIIndex Tamco Description List Price

1A 41046601D Handle - Complete 901.671B 410460060 Throttle Valve Bushing 63.671C 410221300 Throttle Valve Stem Guide 21.402 410211120 Lever 42.753 130401030 Lever Pin 5.634 410466050 Throttle Valve 45.986 130801065 Throttle Valve Spring 3.837 134905019 Thottle Valve Cap 16.988 410466C10 Throttle Valve Pin 13.939 130801066 Valve Pin Spring 3.6110 134704030 Screw Bushing 1/2” x 3/8” 12.7811 134803040 Hose Stem 3/8” x 1/2” 8.4712A 410460100 Valve 99.2112B 410460150 Valve Box 169.6412C 410460140 Valve Seat 132.6212D 130401057 Valve Knock 4.8616 410463191 Cylinder (For RB-91D) 1-1/2” 757.90

410464191 Cylinder (For RB-90D) 1-7/32” 757.9017 410463200 Piston 35.5518 410460300 Clutch 124.1019 410460310 Clutch Band 20.7020 410460320 Clutch Key 11.9121 410460470 Exhaust Band 35.0622 410463560 Piston Stopper (For RB-91D) 21.18

410464560 Piston Stopper (For RB-90D) 21.1830 410211770 Oil Plug NPTF 1/2” 6.0631 136101011 Oil Control Felt 2.6232 134903001 Oil Control Plug PP-2PT 1/8” 2.45

Toku RB-90D Toku RB-91DT32150200 Small Buster Upper Sleeve 11.36 T33210100 Jumbo Buster Upper Sleeve 12.00T32150400 Small Buster Lower Sleeve 14.20 T33210300 Jumbo Buster Lower Sleeve 14.95T32150500 Small Buster Rubber Bumper 3.17 T33210400 Jumbo Buster Rubber Bumper 3.00T32019400 Small Buster Lock Spring 2.35 T33219400 Jumbo Buster Lock Spring 2.30T32019000 Retainer 85.95 T33219000 Retainer 85.95T3215004S Sm. Buster Lower Split Sleeve 18.02 T33210300S Jumbo Buster Low. Split Sleeve 17.50T32150500PJR Small Buster Poly Bumper 5.51 T33210400PJR Jumbo Buster Poly Bumper 5.30


Toku RB-70 Rivet Buster

Toku RB-70 Rivet BusterIIndex Tamco Description List Price

1 41047001B Handle - With Bushing 581.211A 410470010 Handle N/A1B 410460060 Throttle Valve Bushing 63.671C 410460080 Push Rod Sleeve 13.932 410460040 Lever 35.603 130401058 Lever Pin 4 x 21 3.394 410460050 Throttle Valve 40.846 130801065 Throttle Valve Spring 3.837 134905019 Throttle Valve Cap 16.988 130401062 Throttle Valve Pin 6 x 37.5 3.6110 134704030 Screw Bushing 1/2” x 3/8” 12.7811 134803040 Hose Stem 3/8” x 1/2” 8.4712 410470100 Valve 169.2113 410470150 Valve Case 242.2614 410470140 Valve Seat 127.6015 130620061 Spring Pin 3/16” x 28 3.3316 410477190 Cylinder N/A17 410477200 Piston 100.1918 410470300 Clutch 156.2719 410460310 Clutch Band 20.7020 410470320 Clutch Key 19.9321 410470470 Exhaust Band 10.3222 410470560 Piston Stopper 53.7323 T33210100 Jumbo Buster Upper Sleeve 12.0024 T33210300 Jumbo Buster Lower Sleeve 14.9525 T33210400 Jumbo Buster Rubber Bumper 3.0026 T33219001 Retainer 99.0527 T33219400 Jumbo Buster Lock Spring 2.30801 41047001D Handle Assembly - Incl. Sym No.1A, 1B, 1C, 2,3,4,6,7,8 817.25812 41047010B Valve Complete - Incl. Sym. No. 12,13,14,15 N/A816 41047719C Cylinder Complete - Incl. Sym. No. 16,22 N/A


Toku RB-70D Rivet Buster

Toku RB-70D Rivet BusterIIndex Tamco Description List Price

1 41047101F Handle - With Bushing 659.031A 410471011 Handle N/A1B 410460060 Throttle Valve Bushing 63.671C 410221300 Throttle Valve Stem Guide 21.402 410207120 Lever 40.843 130401030 Lever Pin 3.969 X 34.6 5.634 410466050 Throttle Valve 45.986 130801065 Throttle Valve Spring 3.837 134905019 Thottle Valve Cap 16.988 410466C10 Throttle Valve Pin 13.939 130801066 Valve Pin Spring 3.6110 134704030 Screw Bushing 1/2” x 3/8” 12.7811 134803040 Hose Stem 3/8” x 1/2” 8.4712 410470100 Valve 169.2113 410470150 Valve Case 242.2614 410470140 Valve Seat 127.6015 130620061 Spring Pin 3/16 X 28 3.3316 410477190 Cylinder N/A17 410477200 Piston 100.1918 410470300 Clutch 156.2719 410460310 Clutch Band 20.7020 410470320 Clutch Key 19.9321 410470470 Exhaust Band 10.3222 410470560 Piston Stopper 53.7323 T33210100 Jumbo Buster Upper Sleeve 12.0024 T33210300 Jumbo Buster Lower Sleeve 14.9525 T33210400 Jumbo Buster Rubber Bumper 3.0026 T33219001 Retainer 99.0527 T33219400 Jumbo Buster Lock Spring 2.3030 410211720 Oil Plug NPTF 1/2 N/A31 136101011 Oil Control Felt 2.6232 134901001 Oil Control Plug, PP-2 PT 1/8 N/A801 41047101D Handle Assembly - Sym. 1A, 1B, 1C, 2,3,4,6,7,8,9,30,31,32 925.53812 41047010B Valve Complete - Sym. 12,13,14,15 N/A816 41047719C Cylinder Complete - Sym. 16,22 N/A


Toku RB-91HP Rivet Buster

1620

17 15 14 12 13

26 27 25 23 24 21 22

1B

8

4

6

7

1C

1110

1A

32

1918

Toku RB-91HP Rivet BusterIIndex Tamco Description List Price

1A 41047001B Handle w/Bushing 581.211B 410460060 Throttle Valve Bushing 63.671C 410460080 Push Rod Sleeve 13.932 410460040 Lever 35.603 130401058 Lever Pin 3.394 410460050 Throttle Valve 40.846 130801065 Throttle Valve Spring 3.837 134905019 Throttle Valve Cap 16.988 130401062 Throttle Valve Pin 3.6110 134704030 Screw Bushing 12.7811 134803040 Hose Stem 8.4712 410470100 Valve 169.2113 410470150 Valve Case 242.2614 410470140 Vave Seat 127.6015 130620061 Spring Pin 3.3316 410475190 Cylinder N/A17 410470200 Piston 100.1918 410470300 Clutch 156.2719 410460310 Clutch Band 20.7020 410470320 Clutch Key 19.9321 410470470 Exhaust Band 10.3222 410470560 Piston Stopper 53.7323 T33210300 Jumbo Buster Lower Sleeve 14.9524 T33210100 Jumbo Buster Upper Sleeve 12.0025 T33210400 Jumbo Buster Rubber Bumper 3.0026 T33219001 Retainer 99.0527 T33219400 Jumbo Buster Lock Spring 2.30


Toku RB-91HPD Rivet Buster

Toku RB-91HPD Rivet BusterIIndex Tamco Description List Price

1 41047101D Handle Complete 925.531A 41047101F Handle With Bushing 659.03

410471011 Handle N/A1B 410460060 Throttle Valve Bushing 63.671C 410221300 Throttle Valve Stem Guide 21.402 410207120 Lever 40.843 130401030 Lever Pin 3.969 x 34.6 5.634 410466050 Throttle Valve 45.986 130801065 Throttle Valve Spring 3.837 134905019 Throttle Valve Cap 16.988 410466C10 Throttle Valve Pin 13.939 130801066 Valve Pin Spring 3.6110 134704030 Screw bushing 1/2 X 3/8 12.7811 134803040 Hose Stem 3/8 X 1/2 8.4712 410470100 Valve 169.2113 410470150 Valve Case 242.2614 410470140 Valve Seat 127.6015 130620061 Spring Pin 3/16 X 28 3.3316 410475190 Cylinder N/A17 410470200 Piston 100.1918 410470300 Clutch 156.2719 410460310 Clutch Band 20.7020 410470320 Clutch Key 19.9321 410470470 Exhaust Band 10.3222 410470560 Piston Stopper 53.7323 T33210300 Lower Sleeve 14.9524 T33210100 Upper Sleeve 12.0025 T33210400 Rubber Bumper 3.0026 T33219001 Retainer 99.0527 T33219400 Lock Spring 2.3030 410211720 Oil Plug NPTF 1/2 N/A31 136101011 Oil Control Felt 2.6232 134901011 Oil Control Plug PP-2 PT 1/8 N/A812 41047010B Valve Complete N/A816 41047519C Cylinder Complete N/A


Tamco RB-133 Rivet Buster

Tamco RB-133 Rivet BusterIndex Tamco Kent Description List Price1 APT-7531 K14404 Handle Kit (Complete) 608.732 APT-3161 K14424 Lock Ring Spring 57.823 APT-3160 K14417 Valve Assembly - Complete 648.814 APT-3156 K14414 Valve Rear 220.205 APT-3157 K14415 Valve, Auto 159.486 APT-3158 K14416 Valve Front 220.207 APT-16592 K14418 Dowel Pin 6.778 APT-3165 K14421 Piston 31.949 APT-3152 K14419 Cylinder N/A10 APT-3162 K14423 Lock Ring 64.4311 APT-3163 Exhaust Defl ector 37.4012 T33210100 K14001 Jumbo Buster Upper Sleeve 12.0013 T33210300 K14029 Jumbo Buster Lower Sleeve 14.9514 T33210400 K14030 Jumbo Buster Rubber Bumper 3.0015 T33185100 T33219000 Retainer 112.5916 T33219400 K14032 Jumbo Buster Lock Spring 2.3017 APT-3147 K14405 Throttle Lever 55.3118 APT-3151 K14407 Tefl on Throttle Valve 38.3319 APT-215 K14410 Throttle Valve Spring 5.5120 APT-1269 Throttle Valve O-Ring 2.7921 APT-7079 Valve Cap Retainer 23.1022 APT-1158 Throttle Valve Retaining Ring 2.4023 APT-4491 K14413 Throttle Valve Stem Guide 22.8324 APT-3155 K14403 Handle (Stripped) N/A25 APT-3146 K14406 Lever Pin 3.8326 134704030 K14425 Screw Bushing 12.7827 APT-8574 Throttle Valve Bushing Kit 91.1228 APT-1269 Throttle Valve O-Rings 2.7930 APT-3150 K14412 Throttle Pin 23.59


Tamco RB-1133 Rivet Buster

Tamco RB-1133 Rivet BusterIndex Tamco Kent Description List Price1 APT-7531 K14404 Handle Kit (Complete) 608.732 APT-3161 K14424 Lock Ring Spring 57.823 APT-3160 K14417 Valve Assembly - Complete 648.814 APT-3156 K14414 Valve Rear 220.205 APT-3157 K14415 Valve, Auto 159.486 APT-3158 K14416 Valve Front 220.207 APT-16592 K14418 Dowel Pin 6.778 APT-17529 K14421 Piston 50.629 APT-17390 K14419 Cylinder N/A10 APT-3162 K14423 Lock Ring 64.4311 APT-3163 Exhaust Defl ector 37.4012 T33210100 K14001 Jumbo Buster Upper Sleeve 12.0013 T33210300 K14029 Jumbo Buster Lower Sleeve 14.9514 T33210400 K14030 Jumbo Buster Rubber Bumper 3.0015 T33185100 T33219000 Retainer 112.5916 T33219400 T33219400 Jumbo Buster Lock Spring 2.3017 APT-3147 K14405 Throttle Lever 55.3118 APT-3151 K14407 Tefl on Throttle Valve 38.3319 APT-215 K14410 Throttle Valve Spring 5.5120 APT-1269 Throttle Valve O-Ring 2.7921 APT-7079 Valve Cap Retainer 23.1022 APT-1158 Throttle Valve Retaining Ring 2.4023 APT-4491 K14413 Throttle Valve Stem Guide 22.8324 APT-3155 K14403 Handle (Stripped) N/A25 APT-3146 K14406 Lever Pin 3.8326 134704030 K14425 Screw Bushing 12.7827 APT-8574 Throttle Valve Bushing Kit 91.1228 APT-1269 Throttle Valve O-Rings 2.7930 APT-3150 K14412 Throttle Pin 23.59


CP-4181 Rivet Buster

CP-4181 Rivet Buster

Index Part No. Description List Price1 P-001873 Throttle Valve Plug 10.542 P-001853 Throttle Valve Spring 2.623 P-001799 Throttle Valve 22.334 P-083071 O-Ring .775 P-004834 Valve Push Pin 1.586 P-007325 Throttle Tube 46.037 P-004839 Throttle Valve Bushing 3.668 P-001983 Air Inlet Bushing9 P-001915 Throttle Lever Pin 1.7010 P-001982 Throttle Lever 35.4311 P-007347 Bare Handle- P-007164 Handle Complete12 410460310 Spring Clip 20.7014 410470150 Valve Case 242.2615 410470100 Main Valve 169.2116 410470140 Valve Case Lid 127.4017 130620061 Dowel 3.3318 P-001231 Piston, 11” Stroke 49.9119 P-001399 Lock Collar20 410470320 Key-Lock Collar 19.9321 410470470 Exhaust Defl ector 10.32- P-007385 Valve Box Complete 443.74- P-073310 Cylinder, 11” Stroke23 T33210100 Upper Sleeve 12.0024 T33210300 Lower Sleeve 14.9525 T33210400 Rubber Bumper 3.0026 T33219400 Lock Spring 2.3027 T33219001 Retainer 99.05


Toku Jet-06 Tamper

1A108

11

1B3

25 7

6

25

24

21

21

9

2322

1920

1816

17

15

14

13

36

3526

2733

2932

3130

2829

34

Toku Jet-06 TamperIIndex Tamco Harper Thor Kent Description List Price1 41060145A 49701 Handle CP (Incl. Index # 1A and 1B) 359.921A 410601450 Handle Bare 246.571B 410601090 49705 K00603 Throttle Valve Bushing 12.232 410601080 49706 Throttle Valve 13.663 131108008 49707 O-Ring (P-10) 1.585 130801078 49708 Throttle Valve Spring 3.446 134905020 49709 Throttle Valve Cap 11.197 131101020 49735 O-Ring (P-22) 2.458 410601110 49702 K00604 Throttle Lever 39.869 130606022 49703 K00605 Spring Pin (6 x 22) 2.0210 130801079 49704 K09648 Throttle Lever Ring 3.4411 410601541 49710 94541 K04410 Connecting Pipe (NPS 3/4) 130.3813 410601550 49711 94542 K04258 Connecting Pipe Lock Nut 24.3614 410601031 49764 94545 K04271 Cylinder Cap (NPS 3/4) 147.9115 134903002 49755 80939 K04282 Plug (NPTF 1/4) 4.3216 410601040 K04292 Cylinder Cap Bushing 25.8917 410601590 49715 94543 K04259 Oil Feeder 7.6418 410601260 49716 95488 K04268 Upper Valve Plate 33.1419 410601280 49719 94547 K04261 Center Valve Plate 16.7620 410601150 49720 1018 K04500 Valve 7.6421 130401092 49721 75439 K04280 Valve Knock Pin 5.7922 410601270 49717 94546 K04260 Lower Valve Block 42.7523 131101033 49718 94550 K01171 O-Ring (P-32) 3.9824 410601010 49722 94552 K04272 Cylinder 500.3025 410601601 49723 94553 K04263 Exhaust Defl ector 35.1626 410601610 49730 94554 K04264 Packing Nut 51.2727 410601620 49731 75431 K04279 Lock Retainer 8.4728 410601320 49724 94555 Inner Bushing (Upper) 16.7629 131101035 49725 91492 K01114 O-Ring (P-35) 3.9830 136101034 49726 Packing (Upper) Thin 22.8831 136101035 49727 Packing (Center) Thick 46.6332 136101036 49728 Packing (Lower) Flat 25.1233 410601330 49729 91489 Outer Bushing 21.0834 410601290 49732 94557 K04266 Piston 149.0635 410601650 K04316 Butt (Iron) 147.5936 410601630 49734 94558 K04267 Clamp Screw 1/2” - 13 Thread 18.4037 41060145D 49740 94540 Handle Assy (Incl. Index # 1,2,3,5,6,7,8,9, and

10)371.83

(11) 410601540 Connecting Pipe (NPT 3/4: Old Type) 129.73(14) 410601030 49712 Cylinder Cap (NPT 3/4: Old Type) 149.06

41060130D 49741, 49743 91491 K04287 Packing CP (Incl. Index # 30,31, and 32) 94.57


SF-A1L1 Cleco Needle Scaler

Index Part No. Description List Price1 S832313 Barrel 78.792 S832963 Tool Nose 22.283 S832700 Cylinder Sleeve 38.774 S842801 Tool Nose Key .715 S832956 Retainer 11.306 S833527 Buffer Molded 1.317 S832554 Retainer Clip 1.978 S832373 Plunger Piston 10.269 S832508 Valve Block 20.48

10 S832196 Flutter Valve 2.8411 S832126 Pin (2 Required) .6012 S832173 Valve Block Button 19.0013 S832207 Throttle Valve Cap 3.6114 S832636 Throttle Valve Gasket .60

Index Part No. Description List Price15 S832078 Throttle Valve Spring .3316 S834782 Throttle Valve 3.2817 S844302 O-Ring .3318 S834848 Pin .9919 S834781 Lever type Backhead 34.5120 S834780 Throttle Lever 20.8021 S832882 Backhead Lock Nut 11.1422 S834045 Needle Driver 28.8823 S834046 Needle Holder 19.6624 S834044 Needle Spring 2.4025 S834779 Round Needle Tube 43.6326 S834043 5” Needle (19 Per Set) .4927 S834024 7” Needle (19 Per Set) .4836 S832947 Backhead Spacer .33

SF-A1L2 Cleco Style Scaler

Index Part No. Description List Price1 S832313 Barrel 78.792 S832963 Tool Nose 22.283 S832700 Cylinder Sleeve 38.774 S842801 Tool Nose Key .715 S832956 Retainer 11.306 S833527 Buffer Molded 1.317 S832554 Retainer Clip 1.978 S832373 Plunger Piston 10.269 S832508 Valve Block 20.48

10 S832196 Flutter Valve 2.8411 S832126 Pin (2 Required) .60

Index Part No. Description List Price12 S832173 Valve Block Button 19.0013 S832207 Throttle Valve Cap 3.6114 S832636 Throttle Valve Gasket .6015 S832078 Throttle Valve Spring .3316 S834782 Throttle Valve 3.2817 S844302 O-Ring .3318 S834848 Pin .9919 S834781 Lever Type Backhead 34.5120 S834780 Throttle Lever 20.8036 S832947 Backhead Spacer .33


I.R. STYLE SF-A182NS / SF-A182WF

12

34

5

6

78

10

11

1213

14

1516

17

18

19

22

21

23

24

25

26

27

28

20

9 ---

I.R. STYLE Needle Scaler / Weld Flux Scaler

Index Part Number Description List Price1 WF163-A Throttle Lever 22.062 ROB1J61-565 Inlet Busing 6.123 WF171-15 Throttle Lever Pin .384 WF-182-160 Backhead (Stripped) 44.065 R2F-167 Throttle O-Ring .386 WF171-49 Throttle Valve 11.367 PX2-626 Throttle Valve Spring .498 WF109-A Throttle Valve Cap 3.669 WF182-27 Casing Lock Nut 12.4510 WF171-4 Vave Cap 39.4311 WF171-8 Valve Spacer 16.4312 WF171-2 Valve 2.7413 WF171-3 Valve Seat 15.2914 WF181-5 Piston 16.6015 WF182-A10A Casing Assembly 183.4616 WF182-716 Retainer Sleeve Lock Plunger 3.4417 R1-271 Plunger Lock Spring .3318 WF182-30A Retainer Sleeve 26.8619 WF182-104 Retainer Sleeve Lock Ring 3.1120 WF171-32 Dowel Pin .3821 WF182-106 Needle Attachment Anchor Pin 3.3922 WF171-28 Retainer Ball .7723 S834024 Needle ( .125” x 7” Flat Needle 19/Set) .4824 NS11-21 Needle Holder 18.6825 NS11-27 Anvil Spring 2.3526 NS11-20 Anvil 29.8227 NS11-A25 Spring Seat Stop 16.0628 NS11-A24 Round Needle Housing w/Spring Seat Stop 53.94


Index Part No. Description List Price1 S5512-H Lever 42.272 S5510 Throttle Bushing 9.073 S5501 Backhead 96.584 S5513 Lever Pin (2) 1.865 S5503 Throttle Spring 1.75

5A SC-100 Stem O-Ring .495B S5511 Throttle Valve 17.865C O-Ring

6 S5502 Throttle Valve Plug 6.827 S5504 Screen 2.248 S5505 Valve Lid 22.069 S5507 Valve 7.8610 S5506 Valve Block 78.08

Index Part No. Description List Price11 S5508 Valve Dowel (2) 2.5712 S695525 Piston w/Thread (4”) 105.4913 S5517 Gland Washer 11.6914 S5518 Packing Set 19.2215 S695550 Packing Gland (4”) 15.1216 S5524 Wiper Seal 11.8517 S5530 Butt Screw 1.9718 SR-5531 Steel Butt (2-1/2”) 57.3419 SR-251S Rubber Butt (2-1/2”) 35.0021 Cylinder (4”)23 S5514 Screened Inlet 5.1424 S5516 Lock Clip 11.6925 S5520 Packing Nut 35.11

SF-1BA Rammer

17


Index Part No. Description List Price1 S5512-H Lever 42.272 S5510 Throttle Bushing 9.073 S5501 Backhead 95.584 S5513 Lever Pin (2) 1.865 S5503 Throttle Spring 1.75

5A SC-100 Stem O-Ring .495B S5511 Throttle Valve 17.865C O-Ring6 S5502 Throttle Plug 6.827 S5504 Screen 2.248 S5505 Valve Lid 22.069 S5507 Valve 7.8610 S5506 Valve Block 78.08

Index Part No. Description List Price11 S5508 Valve Dowel (2) 2.5712 S5521 Piston (2-1/2”) 132.3513 S5517 Gland Washer 11.6914 S5518 Packing Set 19.2215 S5519A Packing Gland(2-1/2”) 19.2216 S5524 Wiper Seal 11.8517 S5530 Butt Screw 1.9718 SR-5531 Steel Butt (2-1/2”) 57.3419 SR-251S Rubber Butt (2-3/8”) 35.0022 S5515 Cylinder (2-1/2”) 325.4723 S5514 Screened Inlet 5.1424 S5516 Lock Clip 11.6925 S5520 Packing Nut 35.11

SF-2BAR Rammer

17


Index Part No. Description List Price1 S832207 Throttle Valve Cap 3.612 S832636 Throttle Valve Gasket .603 S832078 Throttle Valve Spring .334 S834782 Throttle Valve 3.285 S844302 Throttle Valve O-Ring .336 S834848 Throttle Lever Pin .997 S834780 Throttle Lever 20.808 S834781 Backhead 34.519 S832882 Backhead Lock Nut 11.1411 S832173 Valve Block Button 19.0012 S832126 Valve Block Dowel Pin .6013 S832196 Flutter Valve 2.84

Index Part No. Description List Price14 S832508 Valve Block 20.4815 S832702 Cylinder Sleeve 91.8416 S842396 Exhaust Defl ector 14.4717 S832929 Barrel 108.4918 S832749 Piston 151.2519 S832897 Packing Washer 16.6020 S831285 Packing 35.4121 S832862 Gland Bushing 36.9622 S832928 Front Rod Seal 19.3923 S832855 Packing Nut Lock Clip 22.3324 S832878 Packing Nut 49.7425 SR-251S 2-3/8” Rubber Butt 35.00

SF-OBR Rammer

Index Part No. Description List Price1 SF-G01 Backhead 104.562 SF-G02 O-Ring 1.913 SF-G03 Lever Pin 2.454 SF-G04 Throttle Lever 33.755 SF-G05 Throttle Valve 11.636 SF-G06 Pin 1.807 S832196 Main Valve 2.848 SF-G08 Piston 95.719 SF-G09 Bottom Valve Set 32.16

10 SF-G10 Valve Washer 17.6411 SF-G11 Top Valve Set 32.1612 SF-G12 Throttle Spring 1.53

Index Part No. Description List Price13 SF-G13 O-Ring 2.6714 SF-G14 Throttle Plug 8.7915 SF-00300 Inlet Bushing 6.0116 SF-G16 O-Ring 1.7517 SF-G17 Gland Bushing 23.0518 SF-G18 O-Ring 1.7019 SF-G19 Gland Cap 27.0320 SF-G20 Lock Nut 18.5121 SF-G21 Packing 16.8222 SF-G22 Gland Washer 30.5823 SF-G23NN Barrel 220.8524 SR-201S Rubber Butt (1-3/4” S Taper) 35.43

3

4

611

7

10

9

8

23

18

22

24

19

20

16

17

21 (5 pcs. / set)

151

122

5

13

14

SF-00BA Rammer


general information and terms of sale - caridtamco inc., guarantees to repair or replace (at...

Documents