general notes for applicable sheets: left hand …
TRANSCRIPT
412 3/16"(OVERALL LENGTH)
379 3/16"(BASE LENGTH)
INTAKEAIRFLOW
LEFT SIDE VIEW
OUTDOOR AIR INTAKE HOOD
139 9/16"(OVERALL WIDTH)
94 3/16"(BASE WIDTH)
12 7/16"
118 3/8"(OVERALL HEIGHT)
EXHAUST AIR HOOD
BACK VIEW
GENERAL NOTES FOR APPLICABLE SHEETS:
LEFT HAND ACCESS SHOWN IN ALL VIEWSRIGHT HAND ACCESS OPTIONS LOCATED WITH SAME DIMENSIONS ON OPPOSITE SIDE UNLESS OTHERWISE SPECIFIEDWEIGHTS SHOWN REFLECT FULLY OPTIONED ESTIMATED UNIT WEIGHT
UNIT SIZE ESTIMATED WEIGHT (lbs.)
70 - 80 TONS 18500
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
GENERAL ARRANGEMENT
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
1/8
110"
50"
181" 28"
26"
INTAKEAIRFLOW
SIDE CONDENSATELOCATION OPTION
LEFT SIDE CONNECTION VIEW
FILTERACCESS
CIRCUIT AEVAPCOIL
ACCESS
CIRCUIT BEVAPCOIL
ACCESS
REHEATCOIL
ACCESS
SUPPLY FANACCESS
EXHAUST FANACCESS
SIDE ELECTRICALCONNECTION LOCATION OPTION
SIDE HOT WATER COILCONNECTION LOCATION
OPTION
70"
17"
10"
BACK CONNECTIONS VIEW
BACK POOL WATERCONNECTION LOCATIONOPTION
HIGHVOLTAGE
LOWVOLTAGE
REFRIGWALK-INACCESS
32 13/16"
7 3/8" 108"
181"
21"
35"
28"
25"
20"
BOTTOM CUSTOMER CONNECTIONS(VIEWED FROM ABOVE)
BOTTOM ELECTRICALLOCATION OPTION
BOTTOM POOL WATERCONNECTION LOCATION OPTION
BOTTOM CONDENSATELOCATION OPTION
BOTTOM HOT WATER COILCONNECTION LOCATION
OPTION
NOTES:REFER TO SHEET 1 FOR GENERAL NOTES
FILTER INFORMATION
UNIT SIZE OA QTY OA SIZE REPLACEMENT PART NUMBER RA QTY RA SIZE REPLACEMENT
PART NUMBER
70-80 TONS 15 18 X 24 X 4 870-056 15 18 X 24 X 4 870-056
CUSTOMER CONNECTION LINE SIZE (in.)
UNIT SIZE 70-80 TONS
CONDENSATE (PVC) 1 1/2
POOL WATER LINE (CPVC) 3
HOT WATER COIL 4
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
CUSTOMER INTERFACE GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
2/8
39 5/16" 4 15/16"
15 5/16"
49 15/16"
INTAKE
SIDE RETURN AIR
84"
5 3/16"
5 3/16" 35 13/16"
INTAKE
BOTTOM RETURN AIR
75 15/16" 9 3/16"
6 3/16"
23 1/4"
50"
16 3/16"
8 7/8" 76 1/2"
OUTSIDE AIR INTAKE
HORIZONTAL RETURN AIR
HORIZONTAL RETURN AIR OPTION(INTAKE VIEW)
SIDE RETURN AIR OPTION(SIDE VIEW)
BOTTOM RETURN AIR OPTION(VIEW FROM ABOVE)
NOTES:REFER TO SHEET 1 FOR GENERAL NOTESHOODS REMOVED FOR CLARITYACCESS SIDE RETURN AIR OPTION WILL SHIFT FILTER SECTION DOORS TO NON-ACCESS SIDEOUTSIDE AIR INTAKE LOCATED IN THE SAME POSITION REGARDLESS OF OPTIONS
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
INTAKE OPTIONS GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
3/8
15 3/16"
31"
36" 216 1/4"
228 7/16" 37"
52 3/16"
61"
EXHAUST
SIDE SUPPLY
84"
5 1/4"
28 3/4" 238 3/4"
INTAKE
NOTES:REFER TO SHEET 1 FOR GENERAL NOTESLEFT HAND ACCESS SHOWN IN ALL VIEWS UNLESS OTHERWISE SPECIFIEDRIGHT HAND ACCESS OPTIONS LOCATED WITH SAME DIMENSIONS ON OPPOSITE SIDE UNLESS OTHERWISE SPECIFIEDHOODS REMOVED FOR CLARITYEXHAUST AIR LOCATED IN THE SAME POSITION REGARDLESS OF OPTIONSACCESS SIDE SUPPLY AIR OPTION WILL SHIFT FAN SECTION DOORS TO NON-ACCESS SIDE
INTAKE
TOP SUPPLY OPTION
SIDE SUPPLY OPTION
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
DISCHARGE OPTIONS GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
4/8
36" MIN
120"
48"
70"
48" MIN
140"
36"
60"
60"
1
2
21
96" RECOMMENDED FOR FILTER ACCESS.
120" CLEARANCE ON ACCESS SIDE RECOMMENDED FOR FAN AND COIL SERVICE
NOTES:REFER TO SHEET 1 FOR GENERAL NOTESLEFT HAND ACCESS SHOWN IN ALL VIEWSRIGHT HAND ACCESS OPTIONS LOCATED WITH SAME DIMENSIONS ON OPPOSITE SIDE UNLESS OTHERWISE SPECIFIED
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
UNIT CLEARANCE GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
5/8
265 1/4"
18" or 24"
109"
18" or 24"
B
B
86 3/16"
36" 3"
93 3/16"
269 1/4"
EQUIPMENT SUPPORT
2" 2"
89 3/16"
C
SECTION B-B
1 1/2"
1 1/2"
DETAIL CSCALE 1 : 8
WOOD NAILER
NOTES:REFER TO SHEET 1 FOR GENERAL NOTES
14 GA GALVANIZED STEEL CONSTRUCTION1.PRIME PAINTED AFTER FABRICATION2.PRESSURE TREATED WOOD NAILERS3.1-1/2" THICK 3LB/FT^3 FIBERGLASS PERIMETER INSULATION4.INTERNAL ANGLE REINFORCEMENT5.CURB TO BE SHIPPED KNOCKED DOWN6.
NUMBER AND LOCATION OF CROSS SUPPORTS IS DEPENDANT UPON THE GUAGE OF MATERIAL USED TO CONSTRUCT THE CURB,DUCT SUPPORT CONFIGURATION LENGTH OF CURB, AND WIDTH OF CURB. INSTALLATION INSTRUCTIONS INCLUDED WITH CURBSHIPMENT INDICATE THE REQUIRED POSITION FOR FIELD ASSEMBLED CURBS.
UNIT TON 18" CURB 24" CURB70-80 CB-80PCNN-18 CB-80PCNN-24
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
CURB DETAIL GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
6/8
D
DH
SECTION D-D
F
F
G
SECTION F-F
3/4" CLOSED CELL FOAM INSULATIONFACTORY INSTALLED
1" CLOSED CELL FOAM INSULATIONFACTORY INSTALLED
2" EXTRUDED FOAM INSULATION WITH FOIL BACKINGFACTORY INSTALLED
1 1/2" FIBERGLASS INSULATIONFACTORY INSTALLED
WHEN FACTORY CURB PROVIDED
GASKET MATERIALSUPPLIED BY FACTORYWHEN FACTORY CURB PROVIDED
1
1ALL EXPOSED METAL TO BE SPRAY FOAM INSULATIONAFTER INSTALLATION
PRESSURE TREATED WOOD NAILERFACTORY INSTALLEDWHEN FACTORY CURB PROVIDED
CURB MOUNT PAD MOUNT
1" CLOSED CELL FOAM INSULATIONFACTORY INSTALLED
OUTDOOR UNITS ONLY
3/4" CLOSED CELL FOAM INSULATIONFACTORY INSTALLED
OUTDOOR UNITS ONLY
2" EXTRUDED FOAM INSULATION WITH FOIL BACKINGFACTORY INSTALLED
RUBBER ISOLATION PADBY OTHERS
CONCRETE FLOOR/PAD
NOTES:REFER TO SHEET 1 FOR GENERAL NOTESSEE SHEET 6 NOTES FOR CURB SPECIFICATIONS
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
MOUNTING DETAIILS GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
7/8
105"
189 5/8" 105"
OUTDOOR AIR INTAKE HOOD
1 3/4" 3/4"
3"
3/4"
LUG DETAIL
NOTES:REFER TO SHEET 1 FOR GENERAL NOTES AND HOOD DETAILS
SHIP LOOSE ITEMSEXHAUST HOOD
DA PART NO DESCRIPTION QTYHOOD EXHAUST ASSEMBLY 1
890-465-003 BIRD SCREEN 39" X 57" 1807-224 SCREW #10-12X1/2 SS 14807-023 SCREW #8-18X1/2 SS 25990-105 CAULK WHITE 1
N120 W18485 FREISTADT RDGERMANTOWN, WI 53022Tel: (262) 946-7400Fax: (262) 946-7401
Drawing Number
G1000-008
Page Title
Description
SP 70-80 TON PKG
SHIPPING/LIFTING DETAILS GA
Tolerance UnlessOtherwise Specifed
X.X .125X.XX .060X.XXX .030Angles 1
Date ReleasedDrawn
Scale
Sheet
Rev.
1/19/2018ASV
3NTS
All Dimensions in InchesAll Angles 90
All outside corners 0.125" filletUnless Otherwise Specified
Third Angle Projection
G1000-008
Part weight
Desert Aire has a policy of continuous product and quality improvement.Specifications and dimensions aresubject to change without notice.
This drawing and information contained herein are the exclusive property of the
Desert Aire Corporation. Any use detrimentalto the interests of Desert Aire is prohibited.
ALL DIMENSIONS ARE IN INCHESTOLERANCE 1/8"
8/8