general purpose relay mjn · 2 general purpose relay mjn specifications contact data coil data...

General Purpose Relay MJN 1

General Purpose Relay

MJNRelay with Plug-in Termination, available in SPDT, DPDT or 3PDT models• Rugged power driver offers superior 3/16” through-air

and 3/8 over-surface spacing• Interlocked frame and contact block prevent contact

misalignment during plug-in• Available with dust covers, indicator lamps and

push-to-operate buttons• UL and CSA recognition as motor controllers up to 600 VAC• Recognized for 1/2 hp motor control applications at 240/

480/600 VAC (1/3 hp at 120 VAC)

Ordering InformationTo Order: Select part number and add the desired coil voltage rating (e.g. MJN1C-AC24).

!"#$%&'%()*+,-.$/$01,2%+& 3.$/$01,2%+& 4.$/$01,2%+&

!"#$ %&'() %&'()*' %&'()+ , ,#"!$--.'/0')1 , , , , %&'(2*3*4"#"#$ %&'5) %&'5)*' %&'5)+ %&'5)3 ,6"#$ %&'6) %&'6)*' %&'6)+ , ,!"#$ %&'()*7 %&'()*7' , , ,#"#$ %&'5)*7 %&'5)*7' , , ,6"#$ %&'6)*7 %&'6)*7' , , ,

89:;? #"#$ %&'5)@ , , , ,

!:9>A9BA

"CD

5*167891 :+&*)(*$;+,6

2 General Purpose Relay MJN

Specifications

Contact Data

Coil DataNon-latching - AC

Non-latching - DC

Latching - AC

Note: 120% of nominal or greater (one second duration single pulse) unlatch voltage - - above this the relay latches again.Maximum continuous voltage: 120% of nominal (one coil only).

Configuration SPDT, DPDT, 3PDTInitial contact resistance 50 m max.Materials 3/16” diameter Ag-AlloyContact UL ratings 10 A 10 amp @ 28 VDC and 120/240 VAC at 80% pf, 1/3 hp @ 120 VAC, 1/2 hp @ 277/240/480/600 VAC

8.5 FLA - 36 LRA at 18 VDC, 3 amp @ 480/600 VAC at 80% pf, 10 amp @ 277 VAC resistive20 A 20 amp @28 VDC and 120/240/277 VAC, 10 amp @ 480/600 VAC, 3/4 hp @ 120 VAC, 1-1/2 hp

@ 240 VAC, 17 FLA - 65 LRA at 300VAC30 A 30 amp @ 28 VDC, 15 amp @ 480 / 600 VAC, 1hp @ 120 VAC, 1-1/2 hp @ 240 VAC

UL recognized file number E196745

Nominal voltage

Resistance in Ohms 10% Nominal coil power Coil voltages

Insulation resistance

Pick up voltage at25 C (77 F)1 & 2 PDT 3PDT 1 & 2 PDT 3PDT

1.7 VA 2.0 VA 6 to 240 VAC 50/60 Hz

1,000 Mmin. @ 500 VDC

85% of nominal24 VAC 75 72120 VAC 2,250 1,700240 VAC 9,100 7,200

Nominal voltage

Resistance in Ohms 10% Nominal coil power Coil voltages


Pick up voltage at25 C (77 F)

M 000,1CDV 011 ot 5W 2.1 min. @ 500 VDC

75% of nominal12 VDC 12024 VDC 47048 VDC 1,800110 VDC 10,000

Nominal voltage

Latch coil resistance in Ohms 10%

Unlatch coil resistance in Ohms 10%

Nominal coil power Coil voltages


Operate voltage(latch/unlatch) at 25 C (77 F)(see note)

1.7 VA 2.0 VA 6 to 240 VAC 50/60 Hz

1,000 Mmin. @ 500 VDC

85% of nominal24 VAC 88 1,740

120 VAC 2,090 17,430


Latching - DC

Note: 120% of nominal or greater (one second duration single pulse) unlatch voltage - - above this the relay latches again.Maximum continuous voltage: 120% of nominal (one coil only).

Characteristics

Note: A latch pulse of 50 ms minimum at nominal voltage is recommended to insure positive latching.

Nominal voltage

Latch coil resistance in Ohms 10%

Unlatch coil resistance in Ohms 10%

Nominal coil power Coil voltages


Operate voltage(latch/unlatch) at 25 C (77 F)(see note)

M 000,1CDV 011 ot 5W 2.1 min. @ 500 VDC

75% of nominal12 VDC 80 27524 VDC 330 1,07048 VDC 1,290 2,850110 VDC 5,125 10,750

Operate time 15 ms nominal; 20 ms maximumRelease time 6 ms nominal; 10 ms maximumLatch time 13 ms nominal with a one second pulse of nominal voltage (See note)Unlatch time 13 ms nominal with a one second pulse of nominal unlatch voltage after latching with

a one second pulse of nominal latching voltage (See note)Operating ambient temperature

AC: 1 & 2 pole Operating -45 to 60 C (-49 to 140 F)Storage -65 to 100 C (-85 to 212 F)

AC: 3 pole Operating -45 to 45 C (-49 to 113 F)Storage -65 to 100 C (-85 to 212 F)

DC: 1, 2 & 3pole

Operating -45 to 70 C (-49 to 158 F)Storage -65 to 100 C (-85 to 212 F)

Insulation material High quality phenolicDuty cycle Rated for continuous duty operation at 25% overvoltageShock 15 g’s 11 1 ms (non-operating test, no mechanical damage)Vibration 0.1” DA or 10 g’s, 10 to 55 Hz (operating test, no contact chatter)

ta lacirtcelEycnatcepxe efiLrated load

100,000 operations

Mechanical 10,000,000 operationsDielectric strength Greater than 750 VAC, RMS 60 Hz across open contacts

Greater than 2,500 VAC, RMS 60 Hz all other mutually insulated elementsTerminals Quick ConnectWeight 64 g (2.3 oz) open relay

54 g (3.0 oz) enclosed relay


Terminal Arrangement

Non-Latching

Latching / Unlatching

!"#$%&'()*##'&+"$"&,)

-'+").)

)/0&12',34%&+)5)

6)

7)

8-9!)*) :)

;)

.)

7)

9-9!)*) :)

)

;)

.)

7)


DimensionsUnit: mm (inch)

Relays

PYMJN-PCB58.67 (2.31)

Part number

Hold Down Springs Dimensional Reference chart

Referencedimension

Actualdimension

PYMJN-S

ABCABC

53.82 (2.12)37.08 (1.46)58.67 (2.31)53.59 (2.11)40.26 (1.59)

Note: Mates with .187” UL standard quick-connectterminals; also suitable for solder connection.

63.50(2.50)

9.53(0.38)

15.74(0.62) 7.87

(0.31)

19.05(0.75)

48.38(1.905)max.

73.66(2.90) max.

7.11(0.28)

38.73(1.525)max.2.03

(0.08)Typ. 2 10.54

(0.415)

35.56(1.400)max.

1.77(0.07)

1.52(0.06)

4.75(0.187)

1.98(0.078)

3.18(0.125)

6.35(0.250)

7.11(0.280) ref.

0.51(0.020)

AB

C

35.56(1.400) max.

38.73(1.525) max.

48.38(1.905) max.

7.11(0.28)

6.35± .(.25± .

3.17 dia.(.125 dia.)

8.00(.315)

0.81(.032

± .07±

.003)

05002)

MJN�CF / MJN1Z-E-RP / MJN2CE MJN�C(-**) / MJN2CKFlanges type

*Regarding terminal arrangement, please see the previous page

Plug-in type

Terminal-10 Amp Version Hold Down Springs

Terminal-20 and 30 Amp Versions


Sockets (for use with 10 Amp, non-flange mount versions)

3.96(0.156)

PTF11PC

Top View

Top View

PTF21PC

43.26(1.70)

39.37(1.55)

26.16(1.03)

8.04(0.317)

38.10(1.50)

76.20(3.0)

9.91(0.39)

22.35(0.880)

7.94(0.313)

48.08(1.893)

3.96(0.156) typ.

8.04(0.317)

39.95(1.573)

41.61(1.638)

79.91(3.146)

6 5 4

3 2 1

9 8 7

B A

6 5 4

3 2 1

9 8 7

B A


4.57(0.180)

2.29(0.090)

13.87(0.546)

42.85(1.687)

1.93(0.076) dia.

22.10(0.870)

0.91(0.036)

11.05(0.435)

21.44(0.844)

9.94(0.39)

5.54(0.218)

3.45(0.136)

3.68(0.145)

3.96(0.156)

42.85(1.687)

8.05(0.317)

22.10(0.870)

51.56(2.03)

1.40(0.055)

4.19(0.165) dia.

42.85(1.687)

8.64(0.340)

4.19(0.165) dia.

34.93(1.375)

7.54(0.297)

4.75(0.187)

31.75(1.250)

22.10(0.870)

51.56(2.030)

3.18(0.125)

9.52(0.375)

38.10(1.50)

38.10(1.50)

PTFPCB

PTF11QDC

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.


MEMO

Terms and Conditions of Sale1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed

part of all quotes, agreements, purchase orders, acknowledgments, price lists,catalogs, manuals, brochures and other documents, whether electronic or inwriting, relating to the sale of products or services (collectively, the "Products")by Omron Electronics LLC and its subsidiary companies (“Omron”). Omronobjects to any terms or conditions proposed in Buyer’s purchase order or otherdocuments which are inconsistent with, or in addition to, these Terms.

2. Prices; Payment Terms. All prices stated are current, subject to change with-out notice by Omron. Omron reserves the right to increase or decrease priceson any unshipped portions of outstanding orders. Payments for Products aredue net 30 days unless otherwise stated in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of invoicessent to Buyer after deducting transportation charges, taxes and duties, and willbe allowed only if (i) the invoice is paid according to Omron’s payment termsand (ii) Buyer has no past due amounts.

4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month orthe maximum legal rate, whichever is less, on any balance not paid within thestated terms.

5. Orders. Omron will accept no order less than $200 net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-tation or sale of the Products.

7. Taxes. All taxes, duties and other governmental charges (other than generalreal property and income taxes), including any interest or penalties thereon,imposed directly or indirectly on Omron or required to be collected directly orindirectly by Omron for the manufacture, production, sale, delivery, importa-tion, consumption or use of the Products sold hereunder (including customsduties and sales, excise, use, turnover and license taxes) shall be charged toand remitted by Buyer to Omron.

8. Financial. If the financial position of Buyer at any time becomes unsatisfactoryto Omron, Omron reserves the right to stop shipments or require satisfactorysecurity or payment in advance. If Buyer fails to make payment or otherwisecomply with these Terms or any related agreement, Omron may (without liabil-ity and in addition to other remedies) cancel any unshipped portion of Prod-ucts sold hereunder and stop any Products in transit until Buyer pays allamounts, including amounts payable hereunder, whether or not then due,which are owing to it by Buyer. Buyer shall in any event remain liable for allunpaid accounts.

9. Cancellation; Etc. Orders are not subject to rescheduling or cancellationunless Buyer indemnifies Omron against all related costs or expenses.

10. Force Majeure. Omron shall not be liable for any delay or failure in deliveryresulting from causes beyond its control, including earthquakes, fires, floods,strikes or other labor disputes, shortage of labor or materials, accidents tomachinery, acts of sabotage, riots, delay in or lack of transportation or therequirements of any government authority.

11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship

except in “break down” situations.b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall

constitute delivery to Buyer;c. All sales and shipments of Products shall be FOB shipping point (unless oth-

erwise stated in writing by Omron), at which point title and risk of loss shallpass from Omron to Buyer; provided that Omron shall retain a security inter-est in the Products until the full purchase price is paid;

d. Delivery and shipping dates are estimates only; ande. Omron will package Products as it deems proper for protection against nor-

mal handling and extra charges apply to special conditions.12. Claims. Any claim by Buyer against Omron for shortage or damage to the

Products occurring before delivery to the carrier must be presented in writingto Omron within 30 days of receipt of shipment and include the original trans-portation bill signed by the carrier noting that the carrier received the Productsfrom Omron in the condition claimed.

13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that theProducts will be free from defects in materials and workmanship for a period oftwelve months from the date of sale by Omron (or such other period expressedin writing by Omron). Omron disclaims all other warranties, express or implied.(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THEPRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIRINTENDED USE. Omron further disclaims all warranties and responsibility ofany type for claims or expenses based on infringement by the Products or oth-erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-gation hereunder shall be, at Omron’s election, to (i) replace (in the formoriginally shipped with Buyer responsible for labor charges for removal orreplacement thereof) the non-complying Product, (ii) repair the non-complyingProduct, or (iii) repay or credit Buyer an amount equal to the purchase price ofthe non-complying Product; provided that in no event shall Omron be responsi-ble for warranty, repair, indemnity or any other claims or expenses regardingthe Products unless Omron’s analysis confirms that the Products were prop-erly handled, stored, installed and maintained and not subject to contamina-tion, abuse, misuse or inappropriate modification. Return of any Products byBuyer must be approved in writing by Omron before shipment. Omron Compa-nies shall not be liable for the suitability or unsuitability or the results from theuse of Products in combination with any electrical or electronic components,circuits, system assemblies or any other materials or substances or environ-ments. Any advice, recommendations or information given orally or in writing,are not to be construed as an amendment or addition to the above warranty.See http://www.omron247.com or contact your Omron representative for pub-lished information.

14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLEFOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANYWAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM ISBASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.Further, in no event shall liability of Omron Companies exceed the individualprice of the Product on which liability is asserted.

15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies andtheir employees from and against all liabilities, losses, claims, costs andexpenses (including attorney's fees and expenses) related to any claim, inves-tigation, litigation or proceeding (whether or not Omron is a party) which arisesor is alleged to arise from Buyer's acts or omissions under these Terms or inany way with respect to the Products. Without limiting the foregoing, Buyer (atits own expense) shall indemnify and hold harmless Omron and defend or set-tle any action brought against such Companies to the extent based on a claimthat any Product made to Buyer specifications infringed intellectual propertyrights of another party.

16. Property; Confidentiality. Any intellectual property in the Products is the exclu-sive property of Omron Companies and Buyer shall not attempt to duplicate itin any way without the written permission of Omron. Notwithstanding anycharges to Buyer for engineering or tooling, all engineering and tooling shallremain the exclusive property of Omron. All information and materials suppliedby Omron to Buyer relating to the Products are confidential and proprietary,and Buyer shall limit distribution thereof to its trusted employees and strictlyprevent disclosure to any third party.

17. Export Controls. Buyer shall comply with all applicable laws, regulations andlicenses regarding (i) export of products or information; (iii) sale of products to“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens ofregulated technology or information.

18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any rightand no course of dealing between Buyer and Omron shall operate as a waiverof rights by Omron. (b) Assignment. Buyer may not assign its rights hereunderwithout Omron's written consent. (c) Law. These Terms are governed by thelaw of the jurisdiction of the home office of the Omron company from whichBuyer is purchasing the Products (without regard to conflict of law princi-ples). (d) Amendment. These Terms constitute the entire agreement betweenBuyer and Omron relating to the Products, and no provision may be changedor waived unless in writing signed by the parties. (e) Severability. If any provi-sion hereof is rendered ineffective or invalid, such provision shall not invalidateany other provision. (f) Setoff. Buyer shall have no right to set off any amountsagainst the amount owing in respect of this invoice. (g) Definitions. As usedherein, “including” means “including without limitation”; and “Omron Compa-nies” (or similar words) mean Omron Corporation and any direct or indirectsubsidiary or affiliate thereof.

Certain Precautions on Specifications and Use1. Suitability of Use. Omron Companies shall not be responsible for conformity

with any standards, codes or regulations which apply to the combination of theProduct in the Buyer’s application or use of the Product. At Buyer’s request,Omron will provide applicable third party certification documents identifyingratings and limitations of use which apply to the Product. This information byitself is not sufficient for a complete determination of the suitability of the Prod-uct in combination with the end product, machine, system, or other applicationor use. Buyer shall be solely responsible for determining appropriateness ofthe particular Product with respect to Buyer’s application, product or system.Buyer shall take application responsibility in all cases but the following is anon-exhaustive list of applications for which particular attention must be given:(i) Outdoor use, uses involving potential chemical contamination or electricalinterference, or conditions or uses not described in this document.(ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviationsystems, medical equipment, amusement machines, vehicles, safety equip-ment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or prop-erty. Please know and observe all prohibitions of use applicable to this Prod-uct. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUSRISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUTENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO

ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THEOVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Omron Companies shall not be responsible for theuser’s programming of a programmable Product, or any consequence thereof.

3. Performance Data. Data presented in Omron Company websites, catalogsand other materials is provided as a guide for the user in determining suitabil-ity and does not constitute a warranty. It may represent the result of Omron’stest conditions, and the user must correlate it to actual application require-ments. Actual performance is subject to the Omron’s Warranty and Limitationsof Liability.

4. Change in Specifications. Product specifications and accessories may bechanged at any time based on improvements and other reasons. It is our prac-tice to change part numbers when published ratings or features are changed,or when significant construction changes are made. However, some specifica-tions of the Product may be changed without any notice. When in doubt, spe-cial part numbers may be assigned to fix or establish key specifications foryour application. Please consult with your Omron’s representative at any timeto confirm actual specifications of purchased Product.

5. Errors and Omissions. Information presented by Omron Companies has beenchecked and is believed to be accurate; however, no responsibility is assumedfor clerical, typographical or proofreading errors or omissions.

OMRON CANADA, INC. • HEAD OFFICEToronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com

OMRON ELECTRONICS DE MEXICO • HEAD OFFICEMéxico DF • 52.55.59.01.43.00 • 01-800-226-6766 • [email protected]

OMRON ELECTRONICS DE MEXICO • SALES OFFICEApodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • [email protected]

OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICESão Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br

OMRON ARGENTINA • SALES OFFICECono Sur • 54.11.4783.5300

OMRON CHILE • SALES OFFICESantiago • 56.9.9917.3920

OTHER OMRON LATIN AMERICA SALES54.11.4783.5300

Authorized Distributor:

J34I-E-03 09/16 Note: Specifications are subject to change. © 2016 Omron. All Rights Reserved. Printed in U.S.A.

Printed on recycled paper.

OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com

OMRON EUROPE B.V. • Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands. • +31 (0) 23 568 13 00 • www.industrial.omron.eu

Controllers & I/O • Machine Automation Controllers (MAC) • Motion Controllers • Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O

Robotics • Industrial Robots • Mobile Robots

Operator Interfaces• Human Machine Interface (HMI)

Motion & Drives• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems • Frequency Inverters

Vision, Measurement & Identification• Vision Sensors & Systems • Measurement Sensors • Auto Identification Systems

Sensing• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors • Rotary Encoders • Ultrasonic Sensors

Safety • Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems • Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices • Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays

Control Components • Power Supplies • Timers • Counters • Programmable Relays • Digital Panel Meters • Monitoring Products

Switches & Relays • Limit Switches • Pushbutton Switches • Electromechanical Relays • Solid State Relays

Software • Programming & Configuration • Runtime

OMRON_MJNdatasheet_J34I-E-01_page 2OMRON_MJNdatasheet_J34I-E-01_page 5OMRON_MJN_datasheet_p1_Hiroto editedOMRON_MJNdatasheet_J34I-E-01_page1OMRON_MJNdatasheet_J34I-E-01_page 2OMRON_MJNdatasheet_J34I-E-01_page 3OMRON_MJNdatasheet_J34I-E-01_page 4OMRON_MJNdatasheet_J34I-E-01_page 5OMRON_MJNdatasheet_J34I-E-01_page 6OMRON_MJNdatasheet_J34I-E-01_page 7090600_OMRON_MJNdatasheet_J34I-E-01 (1)_Hiroto edited

general purpose relay mjn · 2 general purpose relay mjn specifications contact data coil data...

Documents