Genesis ST2558Trailer-mounted Coiled Tubing Unit

hydrarig@nov.com nov.com/genesis

You have a new normal. So do we.

HR-6140 Injector• Mounts onto hydraulic tilt stand at the

rear of trailer, allowing tubing to remain stabbed during transit

• Continuous pull capacity of 140,000 lb at a maximum speed of 140 ft/min

• Snubbing capacity of 70,000 lb• Camera system mounted to injector

provides operator with real-time tubing status

With the rollout of our Genesis™ ST2558, we have once again pushed the envelope in the world of high-capacity single-trailer coiled tubing units. Touting a maximum capacity of 25,000 ft of 2⅝-in. tubing and capable of shouldering a maximum tubing load of 140,000 lb, this model was designed to carry the largest strings into the challenging environments of West Texas and New Mexico.

Leveraging our experience and global engineering and manufacturing resources, the ST2558 represents a significant breakthrough in the evolution of coiled tubing transportation. Meet Genesis.

Tractor• Kenworth T800 factory-installed

twin-steer front axles with equalized front suspension; no aftermarket modifications

• Designed for 315,000 gross combined weight (GCW)

• Namco 205 two-speed auxiliary transmission with split shaft

• Improved startability at designed loads High-visibility XL Control Cabin• Provides operator with excellent line of sight for spooling and a

panoramic view of the wellsite• Ergonomically-designed, spacious cabin provides a quiet,

comfortable, and reliable design with large dual pane windows• Heated fixed glass• Multiple HMI displays can be configured to satisfy operator

preference• Optional electric over hydraulic controls

Tractor and trailer with jeep

Tractor and trailer without jeep

Trailer• Articulating dolly with the ability to slide reel 5 ft

forward or aft to effectively distribute weight • Allows flexibility to mix & match weight distribution

options to fit your specific requirements – including a 3-axle jeep and a pin-on gooseneck extension

110.58 ft [33.71m]

15.0

8 ft

[4.6

0m]

15.0

8 ft

[4.6

0m]

123.33 ft [37.59m]

Tubing Reel• Ability to be lifted 10 in. to allow for low-risk crossing cattle

guards, lease approaches, and railway crossings• 25,000 ft of 2⅝-in. capacity with zero freeboard; maximum

tubing load of 140,000 lb with injector

Corporate Headquarters7909 Parkwood Circle Drive Houston, Texas 77036 USA

Intervention and Stimulation Equipment8017 Breen Road Houston, Texas 77064 USA

National Oilwell Varco has produced this brochure for general information onlyand it is not intended for design purposes. Although every effort has been made to maintain the accuracy and reliability of its contents, National Oilwell Varco in no way assumes responsibility for liability for any loss, damage or injury resulting from the use of information and data herein. All applications for the material described are at the user’s risk and are the user’s responsibility.

© 2018 National Oilwell Varco All Rights Reserved4100_ENG_V01

hydrarig@nov.com nov.com/genesis

Hydra Rig1020 Everman Parkway Fort Worth, Texas 76140 USA+1.817.958.5000

United States 1020 Everman Parkway Fort Worth, Texas 76140 1.817.985.5000

1200 East Highway 7 Duncan, Oklahoma 73533 1.580.255.4433

Canada 4910 - 80 Avenue SE Calgary, Alberta T2C 2X3 1.403.279.6430

England Boundary Road Harfeys Industrial Estate Great Yarmouth, Norfolk NR31 0LW 44.1493.651801

Singapore 9A Benoi Sector Singapore 629862 65.62680188