1

George E. Totten, Ph.D., FASM

TEL: 206-427-8825 (Home) 206-788-0188 (Office) FAX: 206-457-8467 Email:GETotten@gmail.com

getotten@getottenassociates.com 1745 NE 88th Street Seattle, WA 98115

TECHNICAL SKILLS:

• Internationally recognized expert on quenching of steel and aluminum. • Internationally recognized expert on fire resistant hydraulic fluids, including

lubrication. • Synthesis of organofunctional monomers and polymers.

PROFESSIONAL EXPERIENCE: 1970 – 2001 - Union Carbide Corporation 2001 – 2001 - The Dow Chemical Company 2001– 2001- Adjunct Professor – Polytechnic University of New York (New York, NY)(Relocated to Seattle at the end of the school year.) 2001 – Present – President of G.E. Totten & Associates, LLC 2004 – Present –Research Professor – Portland State University (Portland, OR) 2005 – 2006 - Visiting Scholar – TexasA&MUniversity (College Station, TX) 2006 – Present – Visiting Professor - Department of Engineering, Materials, Aeronautics and Automobile Technology, School of Engineering at São Carlos, (University of São Paulo, São Carlos, Brazil) 2006 – Present – Associate - Associação Instituto Internacional de Pesquisa, (São Carlos, SP, Brazil) 2006 – 2015 - Adjunct Professor - Texas A&M University (College Station, TX) My industrial research encompassed nearly all of the business areas of the former Union Carbide. Most of my recent work has been in: metal quenchants, heat treatment and surface engineering (25 years), hydraulic fluid technology (20 years) and basic research of lubrication (30 years). From 1978-1989 I was a part-time Ph.D. candidate at New York University. From about 1980-1985, I had a half-time leave of absence from Union Carbide to complete my Ph.D. degree. The title of my research dissertation was: "Substituted Neopentyl Systems via Silyl Ketene Acetal Chemistry and Acetolysis of Alkyl-Substituted Neopentyl Derivatives". Degree was awarded in September, 1989. EDUCATION:

• Ph.D., New YorkUniversity, Physical Organic Chemistry (1989) • M.S., FairleighDickinsonUniversity, Organic Chemistry (1978) • B.S., Fairleigh Dickinson University, Chemistry (1974) -summa cum laude • AAS, Broome Technical Community College, Chemical Technology (1970)

2

MEMBERSHIPS: • ASM International (ASM), • Brazilian Association of Metallurgy and Materials (ABM) • American Chemical Society (ACS) • Society of Automotive Engineers (SAE), • Society of Tribologists and Lubrication Engineers (STLE), • American Society for Testing and Materials (ASTM)

AWARDS AND RECOGNITION:

• ACS Outstanding Chemistry Student Award – 1970 • Union Carbide Corporate Fellow Outstanding Technologist Award – 1994 • Elected Fellow of ASM International (FASM) - 1997 • ASTM Excellence in Symposium and Publication Management – 1997 • ASTM Committee D-2 Award of Appreciation - 1998 • Elected as Honorary Member of the Russian Metallurgists Association – 1998 • ASTM Committee D-2 Award of Excellence – 2000 • SAE McFarland Award - 2000 • Elected Fellow of SAE International – 2002 • ASTM Committee D-2 Scroll of Achievement Award – 2004 • BCC (BroomeCommunity College) Alumni Achievement Award – 2004 • JiangsuUniversity (Zhenjiang, China) Visiting Faculty Lecturer – 2004 • Elected Fellow of IFHTSE (International Federation for Heat Treatment and Surface Engineering) – 2005 • ASTM Award of Merit (and became a Fellow of ASTM) – 2006 • Honorary Member of the Shanghai Heat Treatment of Metals Society – 2006 • Founding Fellow AMME (World Academy of Materials Manufacturing Engineering) -

2006 • Bodeen Award – Heat Treating Society of ASM International – 2007 • George E. Totten Symposium on Quenching – Heat Treating Society of ASM

International – 2007 • ASTM Dudley Award – 2008 • IFHTSE Medal – 2011 • Honorary Member of CSHTSE (Croatian Society for Heat Treatment and Surface

Engineering) – 2013 • CHTS Award for contribution to international communication and cooperation (2013) –

Chinese Heat Treatment Society • Nitrex Hephaestus Award – 2013 – (“…for honoring outstanding experts in the heat

treating community and their scientific contribution in theory and practice” - http://www.nitriding.info/news.asp)

• Alpha Sigma Mu – Distinguished Life Member – 2014 – See: http://www.alphasigmamu.org/about.html

• ASM Eisenman Award – 2017 • ASTM Eagle Award -2018 • STLE International Award – 2019

(http://www.stle.org/files/Awards/International.aspx )

3

PRESIDENT/CHAIRMAN:

• Chairman of ASM Quenching and Cooling Committee – 1988-2001 • Co-chairman of ASM/HTS Technical Programming Committee – 1994-2002 • Chairman of SAE FCIM Board – 2001- 2004 • President of International Federation for Heat Treating and Surface Engineering (IFHTSE) – (2002-2004) • Chairman of ASTM International’s Committee on Publications (COP) – 2003-2006

EDITORIAL BOARD MEMBERSHIP

• Inżynieria Powierzchni (Surface Engineering – Inst. of Precision Mechanics -Poland)

• Jinshu Rechuli (Heat Treatment of Metals – CMES - China) • Rechuli (Heat Treatment of Metals – Shanghai Society for Heat Treatment) • Industrial Heat Engineering (Inst. of Eng. Thermophysics, NationalAcademy of

Sciences of Ukraine – Ukraine) • Int. Journal of Materials & Product Technology (Inderscience) • Int. Journal of Microstructure and Materials Properties (Inderscience) • WSEAS Transactions on Heat and Mass Transfer • Deputy Editor-In-Chief – Journal of Achievements in Materials and

Manufacturing Engineering (JAMME) • Co-Editor (with Prof. Rick Neu of Georgia Tech) – ASTM Journal of Materials

Performance and Characterization

PUBLICATIONS: Coauthored or edited 41 books and Conference Proceedings including: Conf. Proceed. Quenching and Distortion Control, 2.Handbook of Quenchants and Quenching Technology, 3. Heat Treating: Equipment and Processes - 1994 Conf. Proc. 4. Fire Resistance of Industrial Fluids, 5. Tribology of Hydraulic Pump Testing , 6. 2nd International Conference on Quenching and Control 0f Distortion, 7. Steel Heat Treatment Handbook, 8. Handbook of Hydraulic Fluid Technology, 9. Conf. Proceed .3rd International Conference on Quenching and Control of Distortion, 10. Handbook of Aluminum: Physical Metallurgy and Processes, 11. Handbook of Residual Stress, Distortion and Cracking of Steel, 12. ASTM Fuels and Lubes Manual. In addition to a Ph.D. thesis and books, publications also include: 16 patents, over 700 journal and technical papers, magazine and trade journal articles, book chapters, and conference papers. These papers are mostly in the area of poly (ethylene glycol) as phase transfer catalysts, various aspects of heat treating, quenching and surface engineering technology, hydraulic fluids and lubrication technology. A complete listing of all publications is attached.

4

CONFERENCES ORGANIZED AND CHAIRED OR CO-CHAIRED

1. "1st International Conference on Quenching and the Control of Distortion", ASM International, Lincolnshire, IL, 1992. (Co-chaired with Dr. C.E. Bates) 2. "Poly (Ethylene Glycols) As Phase Transfer Catalysts" - American Chemical Society Division of Polymeric Materials: Science and Engineering - ACS National Meeting, Boston, MA, 1993 3. "First International Conference on Equipment and Processes", ASM International, Schaumberg, IL, 1994 (Co-chaired with Dr. R.A. Wallis) 4. "International Conference on Fire Resistance Testing of Industrial Lubricants", ASTM, D-2 Meeting in Indianapolis, IN, June 1995 (Co-chaired with Ing. J. Reichel - DMT Germany) 5. "Tribology of Hydraulic Pump Testing", ASTM, D-2 Meeting in Houston, TX, December 1995 (Co-chaired with G.H. Kling (Caterpillar) and D.M. Smolenski (GM Research)) 6. "Hydraulic Fluids Symposium", IFPE '96 (Hosted by NFPA, Chicago, IL, April 1996 (Co-chaired with G.H. Kling (Caterpillar) and H.M. Melief (Rexroth Corp.)) 7. "Hydraulic Fluid Technology", SAE Toptec Conference, Pittsburgh, PA, September 1996 (Co-chaired with G.H. Kling (Caterpillar) and H.M. Melief (Rexroth Corp)) 8. "2nd International Conference on Quenching and the Control of Distortion", ASM International, Cleveland, OH, 1996 (Co-chaired with Dr. M.A.H. Howes (IITRI) and Dr. S. Sjostrom (ABB Stal)) 9. "Hydraulic Fluid Technology", SAE Toptec Conference”, Shaumberg, IL, August 19-20, 1998 (Co-chaired with G.H. Kling (Caterpillar) and H.M. Melief (Rexroth Corp)) 10. “3rd International Conference on Quenching and Control of Distortion”, Prague, Czech Republic, March, 1999 (Co-Chaired with Prof. B. Liscic and Prof. H.M. Tensi) 11. “International Symposium on Hydraulic Failure Analysis: Fluids”, Components, and System Effects, Reno, NV, December 5-6, 1999 (Co-Chaired with Prof. D. Feldmann and D. Wills) 12. “Symposium on Bench Testing of the Lubrication and Wear Properties of Industrial Fluids Used in Machinery Applications”, Seattle, WA, June 24-27, 2000. (Co-chaired with L.D. Wedeven, J.R. Dickey and M. Anderson.). 13. "Hydraulic Fluids Symposium", IFPE 2000 (Hosted by NFPA, Chicago, IL, April 2000 (Co-chaired with G.H. Kling (Caterpillar) and H.M. Melief (Rexroth Corp.)) 14. “20th Conference of the Heat Treating Society”, St. Louis, MO, October 2000, (Co-Chaired with K. Funatani (Nihon Parkerizing Co. Ltd.)). 15. The 13thInternational Federation for Heat Treatment and Surface Engineering Congress”, October 7-10, 2002, Columbus, OH. (Co-chaired with Dr. Robert Tucker (The Tucker Group, LLC))

5

16. “4th International Conference on Quenching & Control of Distortion”, Beijing, China – November, 2003 (Co-chaired with Prof. Pan Jiansheng (Shanghai Jiaotong University)) 17. “4th International Conference on Thermal Process Modeling and Computer Simulation”, Shanghai, China – May 31-June 2, 2010 (Co-chairing with Prof. Weimin Zhang)

G.E. TOTTEN - PUBLICATIONS 1. Williams, T.C. and Totten, G.E., "Polysulfide Silicon Compounds", USP 4,113,696, Sept. 12, 1978. 2. Williams, T.C. and Totten, G.E., "Polymer Composite Articles Containing Episulfide Substituted Organosilicon Coupling Agents", USP 4,140,830, Feb. 20, 1979. 3. Williams, T.C. and Totten, G.E., "Amino Substituted Mercapto Organosilicon Compounds", USP 4,147,712, April 3, 1979. 4. Williams, T.C. and Totten, G.E., "Polymer Composite Articles Containing Polysulfide Silicon Coupling Agents", USP 4,151,157, Apr. 24, 1979. 5. Williams, T.C. and Totten, G.E., "Polymer Composite Articles Containing Amino Substituted Mercapto Organo Silicon Coupling Agents", USP 4,156,677, May 29, 1979. 6. Williams, T.C. and Totten, G.E., "Polymer Composite Articles Containing Polysulfide Silicon Coupling Agents", USP 4,210,459, Jul. 1, 1980. 7. Williams, T.C. and Totten, G.E., "Polymer Composite Articles Containing Amino Substituted Mercapto Organo Silicon Coupling Agents", USP 4,218,513, Aug. 19, 1980. 8. Goddard, E.D., Matteson, G.H. and Totten G.E., "Counterion Effects In A Cationic Monolayer", J. Coll. Interface Sci.,1982, 85, p 19-27. 9. Totten, G.E. and Williams, T.C., "Liquid Crystal Silanes", USP 4,316,041, Feb. 16, 1982. 10. Totten, G.E., Wesson, J.P., Williams, T.C. and Eager, R.G., "Mildewcidal Silane Compounds", USP 4,339,581, Jul. 13, 1982. 11. Wenke, G., Jacobsen, E.N., Totten, G.E., Karydas, A.C. and Rhodes, Y.E., "Silyl Ketene Acetal Chemistry: Steric Limitations In Lewis Acid-Promoted Addition Of Ketones", Synth. Comm.,1983, 13, p 449-458. 12. Totten, G.E. and Pines A.N., "Alkoxy Functional Silicones", Eur. Pat. 123,935, Jul. 11, 1984. 13. Totten, G.E. and Sabia, A.J., "Process For Imparting Hydrophilicity To Fabric", USP 4,463,036, July 31, 1984. 14. Totten, G.E. and Williams, T.C., "Liquid Crystal Silanes", USP 4,496,482, Jan. 29, 1985. 15. Totten, G.E., Wenke,G. and Rhodes, Y.E., "Dimerization Of Silyl Ketene Acetal: Effect Of Lewis Acid Selection On Product Yield And Structure", Synth. Comm.,1985, 15, p 291-300.

6

16. Jacobsen, E.N., Totten, G.E., Wenke, G., Karydas, A.C., and Rhodes, Y.E., "Steric Effects On The Titanium Tetrachloride Promoted Dimerization Of Silyl Ketene Acetals", Synth. Comm.,1985, 15, p 301-306. 17. Totten, G.E. and Pines, A.N., "Alkoxy Functional Silicones", USP 4,579,964, Apr.1, 1986. 18. Harding, R.H. and Totten, G.E., "Method of Indirect Liquid-Phase Heat Transfer", USP 4,617,984, Oct. 21, 1986. 19. Harding, R.H. and Totten, G.E., "Method of Indirect Liquid-Phase Heat Transfer", USP 4,624,299, Nov. 25, 1986. 20. Totten, G.E., Goddard, E.D., Matteson, G.H. and Wanchisen, M.L., "Counterion Effects On The Aqueous Solution Viscosity Of Cationic Surfactants", J. Am. Oil Chem. Soc.,1986, 63, p. 1586-1589. 21. Totten, G.E., Dakins, M.E., Ananthapadmanabhan, K.P. and Heins, R.W., "Cooling Rate Curve Area: A New Measure Of Quenchant Performance", Heat Treat.,1987, December, p 18-20. 22. Totten, G.E. and Clinton, N.A., "Poly(ethylene glycol) Derivatives as Phase Transfer Catalysts and Solvents for Organic Reactions", Rev. Macromol. Chem. Phys., 1988, C28(2), p 293-337. 23. Dakins, M.E., Totten, G.E. and Heins, R.W.,"Cooling Curve Shape Analysis Can Help Evaluate Quenchants", Heat Treat.,1988, December, p 38-39. 24. Totten, G.E., Dakins, M.E. and Heins, R.W., "Cooling Curve Analysis Of Synthetic Quenchants - A Historical Perspective", J. Heat. Treat.,1988, 6, p 87-95. 25. Bates, C.E. and Totten, G.E., "Procedure for Quenching Media Selection to Maximize Tensile Properties and Minimize Distortion in Aluminum - Alloy Parts", Heat Treat. of Metals, 1988,4, p. 89-98. 26. Totten, G.E., Bates, C.E. and Jarvis, L.M., "Quench Factor Analysis: Polymers vs. Hot Water", Heat Treat.,1989, May, p. 38-40. 27. Totten, G.E. and Johnson, G.C., "Random Polyether Foam Control Agents", USP 4,836,951, June 6, 1989. 28. Jarvis, L.M., Blackwood, R.R., and Totten, G.E., "Thermal Separation of Polymer Quenchants for More Efficient Heat Treatments", Ind. Heat.,1989, November, p 23-24. 29. Totten, G.E., Dakins, M.E. and Jarvis, L.M., "How H-Factors Can Be Used To Characterize Polymers", Heat Treat.,1989, December, p 28-29. 30. Dakins, M.E., Bates, C.E., and Totten, G.E., "Calculation of Grossman Hardenability Factor from Quenchant Cooling Curves", Metallurgia, 1989, 56, p S7-S9. 31. Totten, G.E., "Substituted Neopentyl Systems via Silyl Ketene Acetal Chemistry and Acetolysis of Alkyl-Substituted Neopentyl Derivatives", Ph.D. Dissertation, New York University, 1989. 32. Bates, C.E. and Totten, G.E., "Procedure for Quenching Media Selection to Maximize Tensile Properties and Minimize Distortion in Aluminum - Alloy Parts", Nauchno-Prikladnoi Zhurnal (J. Appl. Science), 1989, 11, p 86-100. 33. Totten, G.E., "Polymer Quenchants: The Basics", Adv. Mat. & Proc., 1990, Vol. 137, No. 3, p 51-53. 34. Alvadia, L.A., Totten, G.E. and Orszak, K.B., " Strategies for the Replacement of Oil Quenchants

7

with Aqueous Polymers", 45 Congresso Anual - Associacao Brasileira de Metals, 1990, 3, p 389-406. 35. Totten, G.E., Wenke, G., Kawamura, H. and Rhodes, Y.E., "Synthesis of 2-Isopropylideneadamantane via a Novel Silylketene Acetal Fragmentation", Presented at the 199th National Meeting of the American Chemical Society, Boston, MA, April 1990; Paper ORGN 396. 36. Bates, C.E. and Totten, G.E., "Quantifying Quench-Oil Cooling Characteristics", Adv. Mat. & Proc., 1991, 3, p 25-28. 37. Totten, G.E., Blackwood, R.R. and Jarvis, L.M., "Analyzing Polymer Quenchants During Use", Heat Treat.,1991, March, p. 16-18. 38. Bates, C.E., Totten, G.E. and Orszak, K.B., "Quench Severity Effects on the Properties of Selected Steel Alloys", Quenching and Carburizing - 3RD International Seminar of IFHT, Melbourne, Australia, 1991; p 46-65. 39. Mues, E., Orszak, K.B., and Totten, G.E., "Selection and Use of Polymer Quenchants", Paper Presented at the Second Tribological Meeting", Organized by the Centro Argentino de Tribologia - Comite Tecnico de la Camara Argentina de Lubricantes, August 15,1991. 40. Bates, C.E., Totten, G.E., and Brennan, R.L.,"Quenching of Steel", ASM Handbook - Volume 4: Heat Treating, ASM International 1991, p. 67-120. 41. Totten, G.E., Orszak,K.B., Jarvis, L.M., and Blackwood, R.R., "How to Effectively Use Polymer Quenchants", Ind. Heat.,1991, October, p 37-41. 42. Totten, G.E., C.E. Bates and L.M. Jarvis, "Type I Quenchants for Aluminum Heat Treating", Heat Treat.,1991, December, p 16-19. 43. Totten, G.E., "Novel Thickened Water-Glycol Hydraulic Fluids For Use At High Pressures", Proceedings of the International Fluid Power Applications Conference - Emperical Design and Applications, Chicago, IL, March 24-26, 1992; p. 419 - 428. 44. Dakins, M.E., Bates, C.E. and Totten, G.E., "Estimating Quench Severity with Cooling Curves", Heat Treat.,1992, April, p 24-26. 45. Bates, C.E. and Totten, G.E., "Quench Severity Effects on the As-Quenched Hardness of Selected Alloy Steels", Heat Treatment of Metals, 1992, 2, p 45-48. 46. Bates, C.E. and Totten, G.E., "Method for Predicting Quench Severity Effects on the Properties of Aluminum and Steel Alloys: I", Ind. Heat. , 1992, August, p 19-23. 47. Totten, G.E., Orszak, K.B., Jarvis, L.M., and Blackwood,R.R., "Selection and Use of Polymer Quenchants", Heat Treatment of Metals (China), 1992, 7, p 53-58. 48. Totten, G.E., "Thickened Water-Glycol Hydraulic Fluids for Use at High Pressures", SAE Technical Paper Series, Paper No. 921738, (1992). 49. Conf. Proceed. Quenching and Distortion Control, Totten, G.E., Ed.; ASM International, Materials Park, OH, 1992. 50. Bates, C.E. and Totten, G.E., "Application of Quench Factor Analysis to Predict Hardness Under Laboratory and Production Conditions", In Conf. Proceed. Quenching and Distortion Control, Totten, G.E., Ed.; ASM International, Materials Park, OH, 1992; p 33-39. 51. Lally, K.S., Kearny, M.W. and Totten, G.E., "Quench Tank Agitation", In Conf. Proceed. Quenching

8

and Distortion Control, Totten, G.E., Ed.; ASM International, Materials Park, OH, 1992; p 95-105. 52. Han, S-W, Yun, S.G. and Totten, G.E., "Continuously Variable Agitation in Quench System Design", In Conf. Proceed. Quenching and Distortion Control, Totten, G.E., Ed.; ASM International, Materials OH, 1992; p 119-126. 53. Totten, G.E. and Lally, K.S., "Proper Agitation Dictates Quench Success - Part I", Heat Treat., 1992, September, p 12-17. 54. Bates, C.E. and Totten, G.E., "Method for Predicting Quench Severity Effects on the Properties of Aluminum and Steel Alloys: II", Ind. Heat.,1992, October, p 29-31. 55. Lally, K.S. and Totten, G.E., "Proper Agitation Dictates Quench Success - Part 2", Heat. Treat., 1992, October, p 28-31. 56. Totten, G.E., "Hydraulic Fluids Take The Heat", Machine Design, 1992, October 22, p 153-156. 57. C.E. Bates and G.E. Totten, "Kwantificering van Koelkarakteristieken van Afschrikolien", Roestvast Staal, 1992, 8, p21-27. 58. K.S. Lally, M.W. Kearney and G.E. Totten, "Quench Tank Agitation for Optimizing Heat Treatments", Ind. Heat.,1993, March, p 49-54. 59. G.E. Totten, N.A. Clinton and P.L. Matlock, "Polyethylene Glycols as Phase-Transfer Catalysts - A Review",Proceedings of The American Chemical Society Division of Polymeric Materials: Science and Engineering, 1993, 69, p 480-481. 60. G.E. Totten, "Thickened Water-Glycol Hydraulic Fluids For Use At High Pressures", New Achievements in Fluid Power Engineering: Proceedings of the Third International Conference on Fluid Power Transmission and Control ('93 ICFP), L. Yongxiang, G. Yiyuan and W. Rongliang, Ed; Int. Academic Publishers, 1993; p 3-9. 61. G.E. Totten, T. Narumi, and L.M. Jarvis, "Chemistry of Quenching", Environmental and Energy Efficient Heat Treatment Technologies: Proceedings of the 4th International Seminar of International Federation for Heat Treatment and Surface Engineering, S. Zhoujun and W. Yingsi, Ed., Int. Academic Publishers, Sept. 15-17, 1993, Beijing China; p 259-268. 62. K.S. Lally, D. Wan and G.E. Totten, "Quench Tank Agitation", Environmental and Energy Efficient Heat Treatment Technologies: Proceedings of the 4th International Seminar of International Federation for Heat Treatment and Surface Engineering, S. Zhoujun and W. Yingsi, Ed., Int. Academic Publishers, Sept. 15-17, 1993, Beijing China; p 282-292. 63. S.G. Yun, S-W. Han and G.E. Totten, "Continuously Variable Agitation in Quench System Design", Environmental and Energy Efficient Heat Treatment Technologies: Proceedings of the 4th International Seminar of International Federation for Heat Treatment and Surface Engineering, S. Zhoujun and W.Yingsi, Ed., Int. Academic Publishers, Sept. 15-17, 1993, Beijing China; p 282-292. 64. R.D. Howard and G.E. Totten, "Expansion of Application Potential of Polymer Quenchants Using Membrane Separation",Environmental and Energy Efficient Heat Treatment Technologies: Proceedings of the 4th International Seminar of International Federation for Heat Treatment and Surface Engineering, S. Zhoujun and W. Yingsi, Ed., Int. Academic Publishers, Sept. 15-17, 1993, Beijing China; p 298-306. 65. L.D. Wedeven and G.E. Totten, "Performance Map Characterization of Lubricating Oils - Characterization of Gear Lubricants Formulated from Different Base Oils", SAE Technical Paper Series, Paper Number 932437, (1993).

9

66. G.E. Totten and G.M. Webster, "Review of Testing Methods for Hydraulic Fluid Flammability", SAE Technical Paper Series, Paper Number, 932436, (1993). 67. K.S. Lally and G.E. Totten, "Quench Tank Agitator", Jinshu Rechuli (Heat Treatment of Metals -Beijing), 1993, 11, p 24-29. 68. G.E. Totten, T. Narumi and L.M. Jarvis, "Quenchant Chemistry Holds the Key to Improved Shop Operations", Heat. Treat.,1993, December, p 16-19. 69. S.G. Yun, S-W. Han, and G.E. Totten, "Continuously Variable Agitation in Quench System Design", Ind. Heat.,1994, January, p 35-38. 70. G.E. Totten, C.E. Bates and N.A. Clinton, Handbook of Quenchants and Quenching Technology, ASM International, Materials Park, OH, 1993. 71. G.E. Totten and G.M. Webster, "High Performance Thickened Water-Glycol Hydraulic Fluids", Proceedings of the 46th National Conference on Fluid Power, March 23-24, 1994, p 185-194. 72. Heat Treating: Equipment and Processes - 1994 Conference Proceedings, G.E. Totten and R.A. Wallis, Ed., ASM International, Materials Park, OH, Schaumberg, IL; April 1994. 73. H.M. Tensi, A. Stich and G.E. Totten, "Fundamentals About Quenching By Submerging", In Heat Treating: Equipment and Processes - 1994 Conference Proceedings, G.E. Totten and R.A. Wallis Ed., ASM International, Materials Park, OH, 1994, p 243-251. 74. B. Liscic and G.E. Totten, "Controllable Delayed Quenching",InHeat Treating: Equipment and Processes - 1994 Conference Proceedings, G.E. Totten and R.A. Wallis, Ed., ASM International, Materials Park, OH, 1994, p 251-262. 75. S.W. Han, S.H. Kang,G.E. Totten and G.M. Webster, "Principles and Applications of the Immersion Time Quenching System in Batch and Continuous Processes", In Heat Treating: Equipment and Processes - 1994 Conference Proceedings, G.E. Totten and R.A. Wallis, Ed., ASM International, Materials Park, OH, 1994, p 337-345. 76. G.E. Totten and G.M. Webster, "Hydraulic Fluid Flammability Testing", Off-Highway Engineering, 1994, April, p 11-15. 77. G.E. Totten, L.M. Jarvis and J. Guadarrama, "Poly(Alkylene Glycol) Quenchants for Aluminum Heat Treating", In Conf. Proceed. Vol. 1 - 3rd International Conference on Aluminum Processing, May 26 -29, 1994, Cancun, Mexico, p 271-285. 78. G.E. Totten and E. Mues, "Thickened Water-Glycol Fluids for Use at High Pressures", Paper Presented at the Third Tribological Meeting", Organized by the Centro Argentino de Tribologia - Comite Tecnico de la Camara Argentina de Lubricantes, August 8-12, 1994. 79. L.D. Wedeven and G.E. Totten, "Performance Map Characterization of Lubricating Oils: Characterization of Gear Lubricants Formulated from Different Base Oils", Paper Presented at the Third Tribological Meeting", Organized by the Centro Argentino de Tribologia - Comite Tecnico de la Camara Argentina de Lubricantes, August 8-12, 1994. 80. G.E. Totten and G.M. Webster, "Review of Testing Methods for Hydraulic Fluid Flammability", Paper Presented at the Third Tribological Meeting", Organized by the Centro Argentino de Tribologia - Comite Tecnico de la Camara Argentina de Lubricantes, August 8-12, 1994. 81. G.E. Totten, R.J. Bishop, R.L. McDaniels, D.P. Braniff and D.J. Irvine, "Effect of Low Molecular

10

Weight Carboxylic Acids on Hydraulic Pump Wear", SAE Technical Paper Series, Paper Number 941751,(1994). 82. L.D. Wedeven, G.E. Totten and R.J. Bishop, "Performance Map Characterization of Hydraulic Fluids", SAE Technical Paper Series, Paper Number 941752,(1994). 83. G.E. Totten, G.M. Webster and C. Ulisses, "Chemistry of Quenching", 49 Congresso Anual - Novos Tipos de Aco e suas Aplicacoes; Tratamento Termico, Associacao Brasileira de Metals, 1994, 8, p 241- 254. 84. R.D. Howard and G.E. Totten, "Membrane Separation of Polymer Quenchants", 49 Congresso Anual Novos Tipos de Aco e suas Aplicacoes; Tratamento Termico, Associacao Brasileira de Metals, 1994, 8, p.255-266. 85. G.E. Totten, R.J. Bishop and G.M. Webster, "Novel Thickened Water-Glycol Hydraulic Fluids For Use At High Pressures", Paper No. CL-99, 1994 AISE Annual Concention, Cleveland, OH, Sept. 1994. 86. G.E. Totten and G.M. Webster, "Rail Steel Production With New Aqueous Polymer Quenching Technology", Proceedings Of The International Symposium On: Rail Steels for the 21st Century, B.L. Bramfitt, R.K. Steel and J.H. Martens Ed. (Iron and Steel Society) Baltimore, MD, Oct. 16-19, 1994. 87. S.W. Han, G.E. Totten and G.M. Webster, "Principles and Applications of the Immersion Time Quenching System in Batch and Continuous Processes", 9th International Congress on Heat Treatment and Surface Engineering and 5th French Open International Conference on Heat Treatment, Nice, France, Sept. 26-28,1994, p.325-333. 88. R.D. Howard and G.E. Totten, "Membrane Separation of Polymer Quenchants", Metal Heat Treating, 1994, Vol.1 No.5, p 22-24. 89. G.E. Totten, S.W. Han, B. Liscic, S. Sanghi, and R.D. Howard, "Recent Technology Developments Expanding the Utility of Polymer Quenchants", Progress in Thermal Treatment of Materials, p. Ramakrishnan Ed., New Age International Publishers, Bombay, 1995, p. 195-205. 90. N. Gopinath and G.E. Totten, "Importance of Agitation on Quenching", Progress in Thermal Treatment of Materials, P. Ramakrishnan Ed., New Age International Publishers, Bombay, 1995, p. 207-217. 91. G.E. Totten, R.J. Bishop Jr., R.L. McDaniels, D.P. Braniff and D.J. Irvine, "Acidic Breakdown of Hydraulic Fluid", Off-Highway Engineering, 1995, April, p. 19-22. 92. D.A. Wachter, R.J. Bishop Jr., R.L. McDaniels and G.E. Totten, "Water-Glycol Hydraulic Fluid Performance Monitoring: Fluid Performance and Analytical Strategy", SAE Technical Paper Series, Paper Number 952155, (1995). 93. G.E. Totten, R.J. Bishop Jr., R.L. McDaniels, and G.H. Kling, "Evaluation of Hydraulic Fluid Performance: Correlation of Water-Glycol Fluid Performance by ASTM D-2882 Vane Pump and Various Bench Tests" ,SAE Technical Paper Series, Paper Number 952156,(1995). 94. H.M. Tensi, A. Stich, and G.E. Totten, "Fundamentals of Quenching", Metal Heat Treating, 1995, Mar./Apr., p. 20-28. 95. G.E. Totten and R.J. Bishop Jr., "Hydraulic Pump Testing Procedures to Evaluate Lubrication Performance of Hydraulic Fluids", SAE Technical Paper Series, Paper Number 952092, (1995). 96. G.E. Totten and R.J. Bishop Jr., "Historical Overview of the Development of Water-Glycol Hydraulic

11

Fluids", SAE Technical Paper Series, Paper Number 952077, (1995). 97. L.D. Wedeven, G.E. Totten and R.J. Bishop Jr., "Performance Map and Film Thickness Characterization of Hydraulic Fluids", SAE Technical Paper Series, Paper Number 952091, (1995). 98. G.E. Totten and G.M. Webster,"Fire Resistance Testing Procedures: A Review and Analysis", in Fire Resistance of Industrial Fluids, Ed. by G.E. Totten and J. Reichel, ASTM STP 1284, June 1995. 99. G.E. Totten and J. Reichel, Ed.,Fire Resistance of Industrial Fluids, ASTM STP 1284, June 1995. 100. G.E. Totten, R.J. Bishop Jr., and G.H. Kling, "Correlation of Water-Glycol Hydraulic Fluid Performance by ASTM D-2882 Versus Various Bench Tests", Proceedings of the International Tribology Conference - Vol. II, Japanese Scociety of Tribologists, Yokohama, 1996, p. 921-926. 101. G.E. Totten, R.J. Bishop Jr., T. Narumi, and D.A. Wachter, "Water-Glycol Hydraulic Fluid Performance Monitoring: Fluid Performance and Analytical Strategy", Proceedings of the International Tribology Conference - Vol. II, Japanese Society of Tribologists, Yokohama, 1996, p. 903-908. 102. L.D. Wedeven, G.E. Totten and R.J. Bishop Jr., "Performance Map and Film Thickness Characterization of Hydraulic Fluids", Proceedings of the International Tribology Conference - Vol. II, Japanese Society of Tribologists, Yokohama, 1996, p. 1095-1100. 103. S.W. Han, S.H. Kang, G.E. Totten and G.M. Webster, "Immersion Time Quenching", Adv. Mat.and Proc., 1995, Sept., p. 42AA-42DD. 104. G.E. Totten, R.J. Bishop Jr. and G.M. Webster, "Novel Thickened Water-Glycol Hydraulic Fluids For Use At High Pressures", Iron and Steel Engineer, 1995, Sept., p. 41-45. 105. G.E. Totten, R.J. Bishop Jr., R.L. McDaniels and D.A. Wachter, "Water-Glycol Hydraulic Fluid Maintenance - Pump Wear Implications and Recommendations", AISE Annual Convention, Pittsburgh, PA, Sept. 1995. 106. G.E. Totten, G.M. Webster, R.R. Blackwood, L.M. Jarvis and T. Narumi, "Designing Chute Quench for Continuous Furnace Heat Treating Effectively", Ind. Heat., 1995, Nov., p. 49-52. 107. G.E. Totten, "Fire Resistance of Hydraulic Fluids", Fuels & Lubes Int., 1995, 1(8), p. 10-11. 108. G.E. Totten, G.M. Webster and E. Mues, "Quenching Fundamentals: Effect of Agitation", First Argentina - USA, Bilateral Symposium on Material Science and Engineering - (FAUSASMAT '95), Nov.12-16, 1995, Buenos Aires, Argentina. 109. G.E. Totten and R.J. Bishop Jr., "Evaluation of Vickers V-104 and 20VQ5 Vane Pumps for ASTM D- 2882 Wear Tests Using Water-Glycol Hydraulic Fluids"; TRIBOLOGY OF HYDRAULIC PUMP TESTING , George E. Totten, Gary H. Kling and and Donald M. Smolenski, Ed., American Society for Testing and Materials, Philadelphia, 1995, p. 118-128. 110. R.J. Bishop Jr. and G.E. Totten, "Tribological Testing With Hydraulic Pumps: A Review and Critique", TRIBOLOGY OF HYDRAULIC PUMP TESTING , George E. Totten, Gary H. Kling and and Donald M. Smolenski, Ed., American Society for Testing and Materials, Philadelphia, 1995, p.65-84. 111. L.D. Wedeven, G.E. Totten and R.J. Bishop Jr., "Testing Within the Continuum of Multiple Lubrication and Failure Mechanisms", TRIBOLOGYOF HYDRAULIC PUMP TESTING , George E. Totten, Gary H. Kling and and Donald M. Smolenski, Ed., American Society for Testing and Materials, Philadelphia, 1995, p.3-20.

12

112. TRIBOLOGY OF HYDRAULIC PUMP TESTING STP 1310 , George E. Totten, Gary H. Kling and and Donald M. Smolenski, Ed., American Society for Testing and Materials, Philadelphia, 1995. 113. S-W. Han, Zhao Haiou and G.E. Totten, "Principles and Applications of the Immersion Time Quenching System in Batch and Continuous Processes", Jinshu Rechuli (Heat Treatment of Metals), 1995, 11, p. 19-23. 114. N.I. Kobasko, A.A. Moskalenko, G.E. Totten and G.M. Webster, "Determination of the Second Critical Density of Heat Flux on the Basis of Tests on Standard Samples “Promyshlennaya Teplotekhnika,1995, 17 (5), p. 83-87. 115. N.I. Kobasko, A.A. Moskalenko, G.E. Totten and G.M. Webster, "Study of the Effect of Various Technological Factors on the Second Critical Heat Flux", Promyshlennaya Teplotekhnika, 1995, 17(6), p. 57-64. 116. G.E. Totten, G.M. Webster and N. Gopinath, "Quenching Fundamentals: Effect of Agitation", Adv. Mat.& Proc., 1996, 2, p.73-76. 117. H.M. Tensi, K. Lainer, G.E. Totten and G.M. Webster, "Quenching Uniformity and Surface Cooling Mechanisms", in Heat Treating: Proceedings of the 16 th Conference,Ed. J.L. Dossett and R.E. Luetje, ASM International, Materials Park, OH, 1996, p. 3-8. 118. H.M. Tensi, K. Lainer, G.E. Totten and G.M. Webster, "Industrial Polymer Quenchants - Determination of Cooling Characteristics Laboratory Test Method", .in Heat Treating:Proceedings of the 16 th Conference,Ed. J.L. Dossett and R.E. Luetje, ASM International, Materials Park, OH, 1996, p. 443-449. 119. G.E. Totten, G.M. Webster, L.M. Jarvis and C.E. Bates, "Cooling Curve and Quench Factor Characterization of 2024 and 7075 Aluminum Bar Stock Quenched in Type I Polymer Quenchants",in Heat Treating: Proceedings of the 16 th Conference,Ed. J.L. Dossett and R.E. Luetje, ASM International, Materials Park, OH, 1996, p. 221-229. 120. G.M. Webster and G.E. Totten, "Cooling Curve Analysis - Data Acquisition", in Heat Treating: Proceedings of the 16 th Conference,Ed. J.L. Dossett and R.E. Luetje, ASM International, Materials Park, OH, 1996, p. 427-434. 121. G. Sanchez Sarmiento, G.E. Totten, G.M. Webster and E. Mues, "Computational Determination of Heat Transfer Coefficients of Aqueous Polyalkylene Glycol Bath Solutions in Quenching Operations", in Heat Treating: Proceedings of the 16th Conference,Ed. J.L. Dossett and R.E. Luetje, ASM International, Materials Park, OH, 1996, p. 383-390. 122. C.H. Faulkner, G.E. Totten and G.M. Webster, "Fire Resistance Testing: A Technology Overview and Update", Proceedings of the 47th National Conference on Fluid Power, Volume 1, Chicago, IL, April 23-25, 1996; pp. 75-81. 123. R.J. Bishop Jr., G.E. Totten, G.M. Webster and D.A. Wachter ,"Maintenance of Water-Glycol Hydraulic Fluids", Proceedings of the 47th National Conference on Fluid Power - Volume 1, Chicago, IL, April 23-25, 1996; pp. 107-116. 124. L.D. Wedeven, G.E. Totten and R.J. Bishop, Jr., "Hydraulic Fluid Lubrication: Performance Map and Effective Film Thickness Characterization", Proceedings of the 47th National Conference on Fluid Power - Volume 1, Chicago, IL, April 23-25, 1996; pp. 21-29. 125. G.E. Totten, R.J. Bishop Jr., and G.H. Kling, "Prediction of Hydraulic Pump Lubrication Performance: Bench Test Modeling", Proceedings of the 47th National Conference on Fluid

13

Power - Volume 1, Chicago, IL, April 23-25, 1996; pp. 31-41. 126. G.E. Totten, J. Guadarrama, G.M. Webster, R.R. Blackwood and L.M. Jarvis, "Aluminum Distortion Reduction With Type I Quenchants: Principles and Applications", 5th International Conference on Aluminum Processing, June 20-23,Instituto Mexicano Del Alumino, A.C., 1996, Ixtapa, Mexico. 127. H.M. Tensi, A. Stich, G.E. Totten, G.M. Webster and J. Guadarrama, "Importance of Surface Cooling Mechanism on Quenching Uniformity, Distortion and Cracking", 5th International Conference on Aluminum Processing, June 20-23, Instituto Mexicano Del Alumino, A.C., 1996, Ixtapa, Mexico. 128. G.E. Totten, G.M. Webster, R.R. Blackwood, L.M. Jarvis and T. Narumi, "Chute Quench Recommendations for Continuous Furnace Applications with Aqueous Polymer Quenchants", Heat Treat. Metals, 1996, No. 2, pp. 36-39. 129. R.R. Blackwood, L.M. Jarvis, G.E. Totten, G.M. Webster and T. Narumi, "Reducing Aluminum Distortion With Type 1 Quenchants", Metal Heat Treating, 1996, May/June, pp. 28-31. 130. G.E. Totten and G.M. Webster, "Quenching Fundamentals: Maintaining Polymer Quenchants", Adv. Mat. & Proc., 1996, June, pp. 64AA-64DD. 131. A.V. Sverdlin, G.E. Totten and G.M. Webster, "Analysis of Polymer-Based Quenching Media", Metallovedeniye i Termicheskaya Obrabotka Metallov, 1996, No. 2, pp. 9-12. 132. S.W. Han, A.V. Sverdlin, G.E. Totten and G.M. Webster, "Systems for Regulating the Submersion Time of Pieces in the Quenching Medium During Intermittent and Continuous Processes", Metallovedeniye I Termicheskaya Obrabotka Metallov, 1996, No. 2, pp. 12-16. 133. G.E. Totten, R.J. Bishop Jr. and G.M. Webster, "Water-Glycol Hydraulic Fluid Evaluation by ASTM D-2882: Significant Contributors to Erroneous and Non-Reproducible Results", SAE Technical Paper Series, Paper No. 961740, (1996). 134. G.E. Totten and R.J. Bishop Jr.,"Attempted Bench Test Correlation of Hydraulic Fluids with the ASTM D-2882 Vickers Vane Pump Test", Proceedings AISE 1996 Annual Convention Vol.1, September 30, 1996, Chicago.Il, pp. 735-747. 135. G.E. Totten, R.J. Bishop Jr., R.L. McDaniels and D.A. Wachter, "Water-Glycol Hydraulic Fluid Maintenance", Iron and Steel Engineer, 1996, Oct., p. 34-38. 136. K. Funatani and G.E. Totten, "Overview of Prof. Tamura's Work in Cooling Process Research", In Conf. Proceed. Quenching and Control 0f Distortion II, Totten, G.E., Ed.; ASM International, Materials OH, 1996; p. 3-15. 137. H.M. Tensi and G.E. Totten, "Development of the Understanding of the Influence of Wetting Behavior on Quenching: An Historical Perspective", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials OH, 1996, p. 17-27. 138. B. Liscic, V. Grubiscic and G.E. Totten, "Inverse Hardness Distribution and Its Influence on Mechanical Properties", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials OH, 1996, p.47-54. 139. H.M. Tensi and G.E. Totten, "Calibration and Agitation in Quenching Tanks and Correlation of Success of Hardening with Agitation Rates: A Proposal", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes

14

and S. Sjostrom, ASM International, Materials OH, 1996, p.85-91. 140. A.A. Moskalenko, N.I. Kobasko, O.V. Tolmachova, G.E. Totten and G.M. Webster, "Quenchants Characterization by Acoustical Noise Analysis Cooling Properties of Aqueous Poly(Alkylene Glycol) Polymer Quenchants", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials OH, 1996, p. 117-122. 141. D. McCleod Jr., G.E. Totten and G.M. Webster, "Characterization of Thermally Separated Poly (Alkylene Glycol) Polymer Quenchants by ESR Spectroscopy", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials Park , OH, 1996, p. 525-534. 142. G.E. Totten, H.M. Tensi, G.M. Webster and L.M. Jarvis, "Cooling Curve Analysis - International and National Standard Development: A Status Report", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials OH, 1996, p. 585-593. 143. S.W. Han, S.H. Kang, G.E. Totten and G.M. Webster, "Successful Use of Polymer Quenchants with Crack-Sensitive Steels", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom ASM International, Materials OH, 1996, p.509-515. 144. D.S. MacKenzie, G.E. Totten, and G.M. Webster, "Quenching Fundamentals: Heat Transfer", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials OH, 1996, p. 329-340. 145. Z.H. Ou, G.E. Totten, G.M. Webster and Y. Sun, "PAG Polymer Quenchants: Increasingly Viable Quench Oil Replacements", Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom, ASM International, Materials OH, 1996, p. 517-524. 146. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom Eds., Conf. Proceed. 2nd International Conference on Quenching and Control 0f Distortion, ASM International, Materials OH, 1996. 147. A. Sverdlin, G.E. Totten, C. Bates and L.M. Jarvis, "Use of a Quenching Factor to Predict the Properties of a Polymer Quenching Media", Metallovedeniye i Termicheskaya Obrabotka Metallov, 1996, No. 6, p. 14-17. 148. A. Sverdlin, G.E. Totten, and G.M. Webster, "Polyalkylene Glycol-Based Quenching Media for the Heat Treatment of Aluminum Alloys", Metallovedeniye i Termicheskaya Obrabotka Metallov, 1996, No. 6, p. 17-19. 149. A. Sverdlin, R. Blackwood and G.E. Totten, "Thermal Method of Purifying Polymer Quenching Media", Metallovedeniye i Termicheskaya Obrabotka Metallov, 1996, No. 2, pp. 19-20. 150. Hans M. Tensi und George E. Totten, “Quantifizierung der Konvektion in Abschrecktanks bezüglich ihrer Auswirkung auf die Abschreckleistung”, AWT Härterei-Kolloquium Wiesbaden; 1996. 151. N.I. Kobasko, A.A. Moskalenko, G.E. Totten and G.M. Webster, "Experimental Determination of the First and Second Critical Heat Flux Densities and Quench Process Characterization", J. Mat. Eng. Perf.,1997, Vol. 6(1), p. 93-101. 152. G.E. Totten and M.A.H. Howes Ed., Steel Heat Treatment Handbook, 1997, Marcel Dekker, Inc., New York.

15

153. H.M. Tensi, A. Stich, and G.E. Totten, "Quenching and Quenching Technology", Chapter 4 in Steel HeatTreatment Handbook, Ed. By G.E. Totten and M.A.H. Howes, 1997, Marcel Dekker, Inc., New York, p.157-249. 154. G.E. Totten and M.A.H. Howes, "Distortion of Heat Treated Components", Chapter 5 in Steel Heat Treating Handbook, Ed. By G.E. Totten and M.A.H. Howes, 1997, Marcel Dekker, Inc., New York, p.251-292. 155. G.E. Totten, G.R. Garsombke, D. Pye and R.W. Reynoldson, "Heat Treating Equipment", Chapter 6 inSteel Heat Treatment Handbook, Ed By G.E. Totten and M.A.H. Howes, 1997, Marcel Dekker, Inc., New York, p. 293-481. 156. G.E. Totten, G.M. Webster, L.M. Jarvis and C.E. Bates, "Effect of Section Size, Quenchant Concentration and Agitation on the Physical Properties of Type I Polymer Quenched Aluminum Alloys",inProceedings of the 1st International Non-Ferrous Processing and Technology Conference, Eds. T. Bains and D.S. MacKenzie, ASM International, Materials Park, OH, March 10 12, 1997, p. 7-16. 157. G.E. Totten, G.M. Webster and C.E. Bates, "Quench Factor Analysis: Step-By-Step Procedures for Experimental Determination", in Proceedings of the 1st International Non-Ferrous Processing and Technology Conference,Eds. T. Bains and D.S. MacKenzie, ASM International, Materials Park, OH, March 10-12, 1997, p. 305-312. 158. G.E. Totten and G.M. Webster, " Alternatives to Water Quenching of Aluminum Alloys: A Review", in Proceedings of the 1st International Non-Ferrous Processing and Technology Conference, Eds. T. Bains and D.S. MacKenzie, ASM International, Materials Park, OH, March 10-12, 1997, p.163-173. 159. D.A. Wachter, G.E. Totten and G.M. Webster, "Quenching Fundamentals: Maintaining Quench Oils", Adv. Mat. & Proc.,1997, No. 2, p. 48AA-48CC. 160. G.E. Totten and G.M. Webster, "Fire Resistant Fluid Testing", Fluid Power Journal, 1997, March/April, p.3,32. 161. G.E. Totten, G.M. Webster, C.E. Bates, S.W. Han and S.H. Kang, "Limitations of the Use of Grossman Quench Severity Factors", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G. Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 411-422. 162. G.E. Totten, G.M. Webster, R.R. Blackwood, and L.M. Jarvis, "Bath Maintenance and Troubleshooting of Polymer Quenchant Related Problems in Induction Heat Treating", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G. Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 951-956. 163. S.W. Han, S.H. Kang, G.E. Totten and G.M. Webster, "Applications of Polymer Quenchants for High Hardenability, Crack-Sensitive Steels", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G. Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 373-379. 164. H.M. Tensi, G.E. Totten and G.M. Webster, "Proposal to Monitor Agitation of Production Quench Tanks", in 17th Heat Treating Society Conference Proceedings Including the 1st International

16

Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G.Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 423-431. 165. G.E. Totten, G.M. Webster, L.M. Jarvis, S.W. Han and S.H. Kang, "Thermal/Oxidative Stability and Polymer Drag-Out Behavior of Polymer Quenchants", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G. Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 443-448. 166. D. McCleod, G.E. Totten and G.M. Webster, "Investigation of the Mechanism of Polymer Quenchant Mediation of Heat Transfer During Quenching by ESR Spectroscopy", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G. Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 433-441. 167. G.E. Totten, G.M. Webster, H.M. Tensi and B. Liscic, "Quenching Fundamentals: Standards for Cooling Curve Analysis", Adv. Mat. & Proc., 1997, Vol. 151, No. 6, p. 68LL-68OO. 168. X.L. Chen, L. Meekisho, M. Becker and G.E. Totten, "A Numerical Approach Examination of Obtaining Heat Transfer Coefficients by Quenching Probe Through Lumped Analysis", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G. Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p.355-361. 169. G.E. Totten, G.M. Webster, and C.E. Bates, "Aluminum Quenching with Polymer Quenchants: An Overview", in 17th Heat Treating Society Conference Proceedings Including the 1st International Induction Heat Treating Symposium,Eds., D. Milam, D. Poteet, G.Pfaffmann, W. Albert, A. Muhlbauer and V. Rudnev, ASM International, Materials Park, OH, 1997, p. 247-257 170. C. Sdregas, G.E. Totten and G.M. Webster, "Water-Glycol Hydraulic Fluids: Technological Advancements and Limitations", Transactions: 19th International Die Casting Congress & Exposition, North American Die Casting Association, Minneapolis, MN, Nov. 3-6, 1997, p. 97-101. 171. G.E. Totten and R.J. Bishop Jr., "ASTM D-2882 - Vicker's Vane Pump Test: Replacement of Vicker's V-104 Vane Pump with the 20VQ Vane Pump", AISE 1997 Annual Convention Proceedings - Vol.2, Oct. 1-2, 1997, Cleveland, OH, p. 1439-1452. 172. G.E. Totten, Y.H. Sun, and R.J. Bishop, "Hydraulic Fluids: Foaming, Air Entrainment and Air Release - A Review", SAE Technical Paper Series, Paper Number 972789, (1997). 173. G.E. Totten, J. Cerf, R.J. Bishop and G.M. Webster, "Recent Results of Biodegradability and Toxicology of Water-Glycol Hydraulic Fluids", SAE Technical Paper Series, Paper Number 972744, (1997). 174. S.W. Han, S.H. Kang, G.E. Totten, and G.M. Webster, "Polymer Quenchant Technology: Thermal Separation and Polymer Drag-Out Phenomenon", Proceedings of the 6th International Seminar of IFHT, Oct. 15-18, 1997, Kyongju, Korea, p. 458-464. 175. S.W. Han, S.H. Kang, G.E. Totten and G.M. Webster, "Advances in Polymer Quenchant Technology", Proceedings of the 6th International Seminar of IFHT, Oct. 15-18, 1997, Kyongju, Korea, p. 465-472. 176. G.E. Totten, G.M. Webster, S.W. Han and S.H. Kang, "Limitations of the Use of Grossman Quench Severity Factor", Proceedings of the 6th International Seminar of IFHT, Oct. 15-18, 1997, Kyongju, Korea, p. 450-457.

17

177. Zhao Haiou, G.E. Totten, G.M. Webster and F. Yim, "Poly(Alkylene Glycol) Quenchants for Aluminum Heat Treating", J. of Materials Eng. (China), 1997, 1, p. 14-16. 178. L.D. Wedeven, G.E. Totten, R.J. Bishop Jr. and Y.H. Sun, "Hydraulic Fluid Lubrication: Performance Map and Film Thickness Characterization”, in Wear of Engineering Materials, Ed. J.A. Hawk, ASM International, Materials Park, OH, 15-18 September, 1997, p. 91-98. 179. G.E. Totten and K. Funatani, "Present Accomplishments and Future Challenges of Quenching Technology", Proceedings of the 6th International Seminar of IFHT, Oct. 15-18, 1997, Kyongju, Korea, p. 20-27. 180. G.E. Totten, G.M. Webster, S.H. Kang and S.W. Han, "Direct Forge Quench Quenching with Poly (Alkylene Glycol) Polymer Quenchants”, inAccelerated Cooling/Direct Quenching of Steels, Ed. R. Asfahani, ASM International, Materials Park, OH, Sept. 15-18, 1997, p. 207-216.. 181. N.I. Kobasko, G.E. Totten, and G.M. Webster, "Interrupted Two-Step Cooling Using Poly(Alkylene Glycol) Quenchants", in Accelerated Cooling/Direct Quenching of Steels, Ed. R. Asfahani, ASM International, Materials Park, OH, Sept. 15-18, 1997, p.223-230. 182. B. Liscic and G.E. Totten, “Benefits of Delayed Quenching”, Adv. Mat.& Proc., 1997, No. 9, p. 180-184. 183. G.E. Totten, R.J. Bishop, and G.M. Webster, “Hydraulic Fluid Evaluation by ASTM D-2882: Wear Rate Error Minimization”, in New Achievements and Ideals in Fluid Power Engineering, Eds. L. Yongxiang and G. Yiyuan, 1997, International Acedemic Publishers, Beijing, PRC, p. 36-41. 184. G.E. Totten, J. Cerf and G.M. Webster, “Performance, Biodegradability and Toxicology of High- Performance Hydrolubes”, in New Achievements and Ideals in Fluid Power Engineering, Eds. L. Yongxiang and G. Yiyuan, 1997, International Acedemic Publishers, Beijing, PRC, p. 36-41. 185. L.D. Wedeven, G.E. Totten and R.J. Bishop, “Tribological Modeling of Hydraulic Fluid Lubricity by Performance Map Film Thickness Evaluation”, in New Achievements and Ideals in Fluid Power Engineering, Eds. L. Yongxiang and G. Yiyuan, 1997, International Acedemic Publishers, Beijing, PRC, p. 36-41. 186. G.E. Totten, G.M. Webster and C.E. Bates, “Cooling Curve and Quench Factor Characterization of 2024 and 7075 Aluminum Bar Stocked Quenched in Type I Polymer Quenchant”, Promysh. Teplotek.,1997, 19 (3), p. 59-65. 187. G.E. Totten, G.M. Webster, and C. Ulisses, “Polymer Quenchant Technology: Thermal Separation and Polymer Drag-Out Phenomenon”, Second International Congress on Metallurgy and Materials Technology, Associacao Brasileria de Metalurgia E Materiais, October 12-17, 1997, Sao Paulo, Brazil. 188. S.W. Han. S.H. Kang, G.E. Totten and G.M. Webster, “Advances in Polymer Quenchant Technology”, Second International Congress on Metallurgy and Materials Technology, Associacao Brasileria de Metalurgia E Materiais, October 12-17, 1997, Sao Paulo, Brazil. 189. G.E. Totten, G.M. Webster and C. Ulisses, “Maintenance of Aqueous Polymer Quenchants”, Second International Congress on Metallurgy and Materials Technology, Associacao Brasileria de Metalurgia E Materiais, October 12-17, 1997, Sao Paulo, Brazil. 190. G.E. Totten, G.M. Webster, H.M. Tensi and B. Liscic, “Standards for Cooling Curve Analysis of Quenchants”, Heat Treatment of Metals, 1997, 4, p.92-94. 191. G.E. Totten, G.M. Webster and R.R. Blackwood, “Chute Quench design Recommendations”,

18

Industrial Heat Engineering (Ukraine), 1997, Vol. 19, No. 6, p.57-60. 192. G.E. Totten, N.A. Clinton and P.L. Matlock, “Poly(Ethylene Glycol) and Derivatives as Phase Transfer Catalysts”, J.M.S. - Rev. Macromol. Chem. Phys., 1998, C38 (1), p. 77-142. 193. G.E. Totten, R.J. Bishop and G.M. Webster, “Water-Glycol Hydraulic Fluids: Technological Advancements and Limitations”, 11th International Colloquium, Industrial and Automotive Lubrication Vol. III, Ed. W.J. Bartz, Technische Akademie Esslingen, 13-15 January, 1998, p. 1803-1809. 194. L.D. Wedeven, K. Ludema and G.E. Totten, “Bench Test Modeling of Antiwear Properties of Hydraulic Fluids: A Proposal”, 11th International Colloquium, Industrial and Automotive Lubrication Vol. III, Ed. W.J. Bartz, Technische Akademie Esslingen, 13-15 January, 1998, p. 1817-1824.. 195. G.E. Totten, G.M. Webster, R.R. Blackwood, L.M. Jarvis and T. Narumi, “Chute Quench Designs”, Jinshu Rechuli - Heat Treatment of Metals, 1998, 1, p. 31-34. 196. D. Hanna, G.E. Totten and G.M. Webster, “Water-Glycol Hydraulic Fluids: A New Look”, Proceed. of the 4th Annual Fuels & Lubes Asia Conference, January 14-16, 1998, Singapore, p. 14 - 14-21. 197. G.E. Totten, Y.H. Sun, G.M. Webster, C.E. Bates and L.M. Jarvis, “Computerized Steel Hardness Predictions Based on Cooling Curve Analysis”, SME Technical Paper, Paper Number CM98-203, 1998. 198. G.E. Totten, Y.H. Sun, B. Liscic, N.I. Kobasko and S.W. Han, “Polymer Quenching Technology: An Overview”, 11th Congress of the International Federation of Heat Treatment and Surface Engineering – 4th ASM Heat Treatment and Surface Engineering Conference in Europe Proceedings Vol. 1, 19-21 October, 1998, Florence Italy, p. 141-150. 199. G.E. Totten, Y.H. Sun, H.M. Tensi and B. Liscic, “Development of Cooling Curve Analysis Standards With Agitation: A Status Report”, 11th Congress of the International Federation of Heat Treatment and Surface Engineering – 4th ASM Heat Treatment and Surface Engineering Conference in Europe Proceedings Vol. 1, 19-21 October, 1998, Florence Italy, p. 171-180. 200. G.E. Totten, R.J. Bishop Jr. Y.H. Sun and L. Xie, “Hydraulic System Wear By Cavitation: A Review”, SAE Technical Paper Series, Paper Number 982036, 1998. 201. G.M. Gent, R.J. Bishop Jr. and G.E. Totten, “Review of ASTM D-2882 Hardware Problems and Suggested Solutions”, SAE Technical Paper Series, Paper Number 982021, 1998. 202. H.M. Melief, G.E. Totten and R.J. Bishop, “Overview of the Proposed Rexroth High-Pressure Piston Pump Testing Procedure for Hydraulic Fluid Qualification”, SAE Technical Paper Series, Paper Number 982022, 1998. 203. B. Liscic and G.E. Totten, “From GM Quenchometer via Cooling Curve Analysis to Temperature Gradient Method”, in 18th Heat Treating Society Conference Proceedings, Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 601-609. 204. G.E. Totten, Y. Sun, G.M. Webster, L.M. Jarvis and C.E. Bates, “Quenchant Selection”, in 18th Heat Treating Society Conference Proceedings, Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 183-191. 205. X. Chen, L. Meekisho and G.E. Totten, “Computer-Aided Analysis of the Quenching Probe Test”, in 18th Heat Treating Society Conference Proceedings,Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 545-551.

19

206. N.I. Kobasko, G.E. Totten, G.M. Webster and C.E. Bates, “Comparison of Cooling Capacity of Poly(Alkylene Glycol) Quenchants with Water and Oil”, ”, in 18th Heat Treating Society Conference Proceedings,Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 559- 567. 207. K. Lainer, H.M. Tensi and G.E. Totten, “Comparative Cooling Curve Performance of Two Vegetable Oils and a Mineral Oil”, in 18th Heat Treating Society Conference Proceedings, Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 568-574. 207. R.R. Blackwood, L.M. Jarvis, D.G. Hoffman and G.E. Totten, and “Conditions Leading to Quench Cracking Other than Severity of Quench”, in 18th Heat Treating Society Conference Proceedings, Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 575-585. 208. M. Tiryakioglu and G.E. Totten, “Quenching Aluminum Components in Water: Problems and Alternatives”, in 18th Heat Treating Society Conference Proceedings, Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 156-165. 209. N.I. Kobasko, M.A. Aronov, G.E. Totten and A. Sverdlin, “Methods and Equipment for Implementation of Intensive Quenching” in 18th Heat Treating Society Conference Proceedings, Eds., H. Walton and R. Wallis, ASM International, Materials Park, OH, 1998, p. 616-621. 210. G.E. Totten, G.M. Webster and R.J. Bishop Jr., “Biodegradability and Toxicity of a High-Performance Water-Glycol Hydraulic Fluid”, AISE 1998 Annual Convention Proceedings, September 21-23, 1998, Pittsburgh, PA. 211. G.E. Totten, “Present Accomplishments and Future Challenges of Quenching Technology”, Seminario Internacional de Tratamento Termico, Associacao Brasilerira de Metalurgia e Materiais (ABM), 21 September 1998, Sao Paulo, Brazil, p. 1-16. 212. L.M. Jarvis, G.E. Totten and G.M. Webster, “Use and Maintenance of Poly(Alkylene Glycol) Quenchants for Optimal Distortion Reduction in Induction Heat Treat Practices”, in 8th International Induction Heat Treating Seminar, Kissimmee, FL, November 3-6, 1998. 213. G.E. Totten, G.M. Webster and C.E. Bates, “An Overview of Aluminum Quenching with Polymer Quenchants”, Industrial Heating, 1998, November, p. 61-64. 214. G.E. Totten, N.I. Kobasko, B. Liscic and S.W. Han, “Advances in Polymer Quenching Technology”, The 1st International Automotive Heat Treating Conference, Eds. R. Colas, K. Funatani and C.A. Stickels, ASM International, Materials Park, OH, 1998, p. 37-44. 215. G.E. Totten, N.I. Kobasko and M.A. Aronov, “Intensive Quenching Practices for Automotive Part Production – An Overview”, The 1st International Automotive Heat Treating Conference, Eds. R. Colas, K. Funatani and C.A. Stickels, ASM International, Materials Park, OH, 1998, p. 99-105. 216. G.E. Totten, R.R. Blackwood and L.M. Jarvis, “Importance of Quench Bath Maintenance”, The 1st

International Automotive Heat Treating Conference,Eds. R. Colas, K. Funatani and C.A. Stickels, ASM International, Materials Park, OH, 1998, p. 116-122. 217. G.E. Totten, G.M. Webster, S.W. Han and S.H. Kang, “Immersion Time Quenching Technology to Facilitate Replacement of Quench Oils with Polymer Quenchants for Production of Automotive Parts”, The 1st International Automotive Heat Treating Conference, Eds. R. Colas, K. Funatani and C.A. Stickels, ASM International, Materials Park, OH, 1998, p. 449-455. 218. G.E. Totten and Y.H. Sun, “The Using and Maintenance of Water-Glycol Hydraulic Fluid”, Chinese Hydraulics & Pneumatics, 1998, No. 4, p. 16-20.

20

219. G.E. Totten, G.M. Webster and C.E. Bates, “Cooling Curve and Quench Factor Characterization of 2024 and 7075 Aluminum Bar Stock Quenched in Type I Polymer Quenchants”, Heat Transfer Research, 1998, Vol. 29, No. 1, p. 163-175. 220. H.M. Tensi, G.E. Totten and K. Lainer, “Water Spray and Water Film Cooling”, Conf. Proceed.3rd International Conference on Quenching and Control of Distortion, Eds. G.E. Totten, B. Liscic and H.M. Tensi, , ASM International, Materials Park, OH, 1999, p. 50-61. 221. N.I. Kobasco and G.E. Totten, “Optimization of Intensive Quenching Methods (Part I)”, Conf. Proceed.rnd International Conference on Quenching and Control of Distortion, Eds. G.E. Totten, B. Liscic and H.M. Tensi, , ASM International, Materials OH, 1999, p. 105-111. 222. G.E. Totten, C.E. Bates and Y.H. Sun, “Simplified Property Predictions Based on Quench Factor Analysis for AISI 4140”, Conf. Proceed.3rd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, B. Liscic and H.M. Tensi, , ASM International, Materials OH, 1999, p.219-225 . 223. Pan Jiansheng, Gu Jianfeng, Tian Dong, G.E. Totten, and Xiao Chen, “Computer Aided Design of Complicated Quenching Process by Means of Numerical Simulation Method”, Conf. Proceed.3rd International Conference on Quenching and Control 0f Distortion, Eds. G.E. Totten, B. Liscic and H.M. Tensi, , ASM International, Materials Park, OH, 1999, p.251-259. 224. G.E. Totten, N.I. Kobasko, V.S. Morganyuk, and V.V. Dobrivecher, “ Method of Quenching of Stamps Made out of Alloy and High-Alloy Steels in Aqueous High-Concentration UCON Solutions”, Int. Conf. Industrial Heat Engrg., May 24-30, 1999, Kiev, Ukraine. 225. G.E. Totten and R.J. Bishop Jr., “The Hydraulic Pump Inlet Condition: Impact on Hydraulic Pump

Cavitation Potential”, SAE Technical Paper Series, Paper Number 1999–01–1877. 226. G.E. Totten, G.H. Kling and J. Reichel, “Biodegradable Hydraulic Fluids: A Review”, inThe 6th Scandanavian Int. Conf. On Fluid Power, SICFP’99 Vol. 1, Eds. K.T. Koskinen and M. Vilenius, Tampere Univ. of Tech., Tampere, Finland, May 25-28, 1999, Tampere, Finland, p. 93-112. 227. G.E. Totten, G.H. Kling and J. Reichel, “Development of Hydraulic Pump Performance Standards: An

Overview of Current Activities”, inThe 6th Scandanavian Int. Conf. On Fluid Power, SICFP’99 Vol.2, Eds. K.T. Koskinen and M. Vilenius, Tampere Univ. of Tech., Tampere, Finland, May 25-28, 1999, Tampere, Finland, p. 1111-1121.

228. G.E. Totten Ed., Handbook of Hydraulic Fluid Technology, 1999, Marcel Dekker, Inc., New York. 229. G.E. Totten, G.M. Webster and F.D. Yeaple, "Physical Properties and Their Determination", Chapter 4 inHandbook of Hydraulic Fluid Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 195-304. 230. G.M. Webster and G.E. Totten, "Fire-Resistance Testing Procedures of Hydraulic Fluids", Chapter 7 in

Handbook of Hydraulic Fluid Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 393-426

231. G.H. Kling, D.E. Tharp, G.E. Totten and G.M. Webster, "Ecological Compatibility”, Chapter 8 in

Handbook of Hydraulic Fluid Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 427-468.

21

232. L. Xie, R.J. Bishop Jr., and G.E. Totten, "Bench and Pump Testing of Hydraulic Fluids", Chapter 10 inHandbook of Hydraulic Fluid Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 523-575.

233. S. Lemberger and G.E. Totten, "Failure Analysis”, Chapter 12 in Handbook of Hydraulic Fluid

Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 601-673. 234. P. McHugh, W.D. Stofey, and G.E. Totten, "Mineral-Oil Hydraulic Fluids”, Chapter 14 in Handbook

of Hydraulic Fluid Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 711-794.

235. Y.H. Sun, "Emulsions”, Chapter 17 in Handbook of Hydraulic Fluid Technology, Ed. By G.E. Totten,

1999, Marcel Dekker, Inc., New York, p. 847-916. 236. G.E. Totten and Y.H. Sun, "Water-Glycol Hydraulic Fluids”, Chapter 18 in Handbook of Hydraulic

Fluid Technology, Ed. By G.E. Totten, 1999, Marcel Dekker, Inc., New York, p. 917-982. 237. G.E. Totten, G. Svedberg, and R.J. Bishop, “Hydraulic System Cavitation: Part II – A Review of

Hardware Design-Related Effects”, SAE Technical Paper Series, Paper Number 1999-01-2857, September 13-15,1999.

238. G.E. Totten, G.H. Kling, J. Reichel and R.J. Bishop, “Biodegradable Hydraulic Fluid Review”, SAE

Technical Paper Series, Paper Number 1999-01-2865, September 13-15, 1999. 239. G.E. Totten and G.M. Webster, “Quenching Fundamentals: Stability & Drag-Out of Polymers” Adv. Mat. & Proc., 1999, Vol. 155, No. 6, p. H63-H66. 240.G.E. Totten, H.M. Tensi and K. Lainer, “Performance of Vegetable Oils as a Cooling Medium in Comparison to a Standard Mineral Oil”, J. Mat. Eng. And Perf.,1999, Vol. 8, No. 4, p. 409-416. 241.G.E. Totten, C.E. Bates and Y.H. Sun, “Quench Factor Analysis for Aluminum Property Prediction”, in Heat Treatment and Surface Engineering of Light Alloys, Proceedings of the 7th Seminar of IFHT,

15-17 eptember 1999, Budapest, Hungary, p. 187-196. 242.N.I. Kobasko and G.E. Totten, “Generalization of Experimental and Theoretical Data Needed for Determining Appropriate Boundary Conditions Required for Heat Treating Process Modeling and Property Prediction – Part I”, in Heat Treatment and Surface Engineering of Light Alloys, Proceedings of the 7th Seminar of IFHT, 15-17 September 1999, Budapest, Hungary, p. 315-325. 243.D. Scott MacKenzie, G.E. Totten and N. Gopinath, “CFD Modelling of Quench Tank Agitation”, in Proceed. Of the 10th Congress of the IFHT, Eds. T. Bell and E.J. Mittemeijer, IOM Communications Ltd., London, England, 1999, p. 655-669. 244.Zhao Hai Ou, G.E. Totten, G.M. Webster and Yinghua Sun, “PAG Polymer Quenchants: Increasingly Viable Quench Oil Replacements”, in Proceed. Of the 10th Congress of the IFHT, Eds. T. Bell and E.J. Mittemeijer, IOM Communications Ltd., London, England, 1999, p. 885-896. 245.G.E. Totten, G.H. Kling and J. Reichel, “Development of Hydraulic Pump Performance Standards: An Overview of Current Activities”, in Proceed. Of the Second International Conference on Surface Engineering-Vol. 1, Eds. Li Zhengsheng and Gao Wanzhen, Journal of Materials Protection Publishing House, Wuhan, China, 1999, p. 356-360. 246.G.E. Totten, Y.H. Sun and R.J. Bishop and Xie Lin, “Hydraulic System Cavitation: A Review”, in Proceed. Of the Second International Conference on Surface Engineering-Vol. 1, Eds. Li Zhengsheng and Gao Wanzhen, Journal of Materials Protection Publishing House, Wuhan, China, 1999, p. 414- 429.

22

247. L.M. Jarvis, G.E. Totten, and G.M. Webster, “Cooling Curve Analysis of Polymer Quenchants”, in 19th Heat Treating Society Conference Proceedings, Eds. S. Midea and G. Pfaffmann, ASM International, Materials Park, OH, 1999, p.277-283. 248. G.E. Totten, C.E. Bates and Y.H. Sun, “Simplified Property Predictions for AISI 1045 Steel Based on Quench Factor Analysis”, in 19th Heat Treating Society Conference Proceedings, Eds. S. Midea and G. Pfaffmann, ASM International, Materials Park, OH, 1999, p.292-298. 249 G.E. Totten, G.M. Webster, M. Meindl, H.M. Tensi, and K. Lainer, “Development of a Device for Measuring the Heat-Based Flow Profile of Fluids”, in 19th Heat Treating Society Conference Proceedings, Eds. S. Midea and G. Pfaffmann, ASM International, Materials Park, OH, 1999, p. 343- 354. 250. X. Chen, L. Meekisho and G.E. Totten, “Cooling Curve Analysis Using 1x2” Stainless Steel Probe”, in 19th Heat Treating Society Conference Proceedings, Eds. S. Midea and G. Pfaffmann, ASM International, Materials Park, OH, 1999, p.453-460. 251. T. Reti, I. Felde and G.E. Totten, “Concept of a Fractographic Database for Characterization and Evaluation of Cooling Curve Performance of Quenching Media”, in 19th Heat Treating Society Conference Proceedings, Eds. S. Midea and G. Pfaffmann, ASM International, Materials Park, OH, 1999, p. 584-589. 252. G.E. Totten, G.M. Webster and R.J. Bishop, “Biodegradability and Toxicity of a High-Performance Water-Glycol Hydraulic Fluid”, AISE Steel Technology, 1999, Vol. 76, No. 12, p. 27-30. 253. H.M. Tensi, P. Stitzelberger-Jacob, and G.E. Totten, “Quenching Fundamentals: Surface Rewetting of Aluminum”, Adv. Mat. and Proc., 1999, Vol. 156, No. 5, p. H15-H20. 254. G.E. Totten, G.H. Kling and J. Reichel, “Development of Hydraulic Pump Performance Standards: An Overview of Current Activiries”, in Prodeed.Of the Fourth JHPS Int. Symp. On Fluid Power, Tokyo’99, Ed. S. Yokota, The Japan Hydraulics and Pneumatics Society,Tokyo, Japan, 1999, p. 63- 68. 255. G.E. Totten, J. Reichel, and G.H. Kling. “Biodegradable Hydraulic Fluids: A Review”, in Proceed. Of the Fourth JHPS Int. Symp. On Fluid Power, Tokyo’99, Ed. S. Yokota, The Japan Hydraulics and Pneumatics Society,Tokyo, Japan, 1999, p. 285-290. 256. G.E. Totten, G.M. Webster and R.R. Blackwood, “Chute Quench Design Principles”, Heat Transfer Research, 1999, Vol. 30, No. 4, p. 303-310. 257. G.E. Totten, G.M. Webster and R.J. Bishop, “Comparison of Vickers V-104 and 20VQ5 Vane Pump Wear Rates for Various Water-Glycol Hydraulic Fluids”, 12th International Colloquium, Tribology 2000 – Plus, Vol. III, Ed. W.J. Bartz, Technische Akademie Esslingen, 11-13 January, 2000, p. 2201- 2206. 258. T. Inoue, K. Funatani, and G.E. Totten, “Process Modeling for Heat Treatment: Current Status and Future Developments”, J. Shanghai Jiaotong University, 2000, Vol. E-5, No. 1, p. 14-25. 259. G.E. Totten, R.J. Bishop and. J. Cerf, “Biodegradable, Fire-Resistant, High-Performance Water-

Glycol Hydraulic Fluids”, Proceedings of the 48th National Conference on Fluid Power, Chicago, IL, April4-6, 2000; National Fluid Power Association, Milwaukee, WI, pp.57-63.

260. H.M. Melief, G.E. Totten and R.J. Bishop, “Hydraulic Fluid Qualification Using the Rexroth High- Pressure Piston Pump Test”, Proceedings of the 48th National Conference on Fluid Power, Chicago, IL, April4-6, 2000; National Fluid Power Association, Milwaukee, WI, pp. 241-249.

23

261. G.E. Totten and G.H. Kling, “Development of Hydraulic Pump Performance Standards: An Overview of Current Activities”, Proceedings of the 48th National Conference on Fluid Power,Chicago, IL, April4-6, 2000; National Fluid Power Association, Milwaukee, WI, pp.273-279. 262. G.E. Totten, R.J. Bishop and G.M. Gent, “Evaluation of Hydraulic Fluid Lubrication by Vickers Vane Pump Testing: Effect of Testing Conditions”, Proceedings of the 48th National Conference on Fluid Power,Chicago, IL, April4-6, 2000; National Fluid Power Association, Milwaukee, WI, pp. 281-286. 263. G.E. Totten, R.J. Bishop and G.M. Gent, “Hydraulic Fluid Evaluation by ASTM D 2882: Procedures

to Significantly Improve Precision of Experimental Results”, Proceedings of the 48th National Conference on Fluid Power, Chicago, IL, April4-6, 2000; National Fluid Power Association, Milwaukee, WI, pp. 287-292

264. G.E. Totten, Y.H. Sun and L.M. Jarvis, “Polymer Quench Bath Maintenance: The Role of Cooling

Curve Analysis” SME Technical Paper, Paper Number MF00-118, Nashville, TN, February 23-24, 2000.

265. G.E. Totten and D.S. MacKenzie, “Aluminum Quenching Technology: A Review”, Material Science Forum, 2000, Vols 331-337, p. 589-594.

266. G.E. Totten, “Polymer Quenchants for Induction Heat Treating Applications: The Basics”, 9th

International Induction Heat Treating Seminar, Clearwater, FL, May, 2000. 267. G.E. Totten, G.M. Webster and L.M. Jarvis, “Quenching Fundamentals: Cooling Curve Analysis”,

Heat Treat Prog., 2000, June, p. H44-H47. 268. C.G. Fey, G.E. Totten, R.J. Bishop and A. Ashraf, “Analysis of Common Failure Modes of Axial

Piston Pumps”, SAE Technical Paper Series, Paper Number 2000-01-2581, 2000.. 269. C.G. Fey, R. Goebel, G.E. Totten and R.J. Bishop, “Root Cause Analysis of a Piston Pump Failure: A

Case History”, SAE Technical Paper Series, Paper Number 2000-01-2590, 2000. 270. J. Nätscher, R.J. Bishop, G.E. Totten and A. Ashraf, “Hydraulic Fluid Qualification: An Overview of

Critical Considerations”, SAE Technical Paper Series, Paper Number 2000-01-2541, 2000. 271. G.H. Kling, G.E. Totten and A. Ashraf, “Strategies for Developing Performance Standards for

Alternative Hydraulic Fluids”, SAE Technical Paper Series, Paper Number 2000-01-2540, 2000. 272. G.E. Totten, R.J. Bishop, G.M. Webster and W.E. Sloan, “Anhydrous Polyalkylene Glycol Hydraulic

Fluids: A Review”, SAE Technical Paper Series, Paper Number 2000-01-2557, 2000. 273. G.E. Totten and R.J. Bishop, “Water Glycol Hydraulic Fluids: Conversion and Troubleshooting of

Mineral Oil Hydraulic Systems”, SAE Technical Paper Series, Paper Number 2000-01-2589, 2000. 274. H.M. Tensi, G.E. Totten and T. Künzel, “Physics and Technology of Quenching in Fluids - Part I”

Physics of Quenching”, ”, in the 12th International Federation of Heat Treatment and Surface Engineering Congress – Congress Proceedings: Volume 1, Institute of Materials Engineering Australasia Ltd., Melbourne, Australia, October 30, 2000. p. 1-4.

. 275. H.M. Tensi, G.E. Totten and T. Kunzel, “Physics and Technology of Quenching in Fluids - Part II”

Technology of Quenching”, ”, in the 12th International Federation of Heat Treatment and Surface Engineering Congress – Congress Proceedings: Volume 1, Institute of Materials Engineering Australasia Ltd., Melbourne, Australia, October 30, 2000. p. 5-11.

24

276. N.I. Kobasko, W.S. Morhuniuk, V.V. Dobrivecher and G.E. Totten, “Investigation of Regimes of Die Quenching in High Concentration Aqueous Polymer Solutions”, in the 12th International Federation of Heat Treatment and Surface Engineering Congress – Congress Proceedings: Volume 1, Institute of Materials Engineering Australasia Ltd., Melbourne, Australia, October 30, 2000. p. 75-82. 277. A.F. Farah, O.R. Crnkovic, L.C.F. Canale and G.E. Totten, “Castor Oil: Studies For Heat Treatment Applications”, in the 12th International Federation of Heat Treatment and Surface Engineering Congress – Congress Proceedings: Volume 1, Institute of Materials Engineering Australasia Ltd., Melbourne, Australia, October 30, 2000. p. 83-88. 278. G. Sanchez Sarmiento, D.M. Coslia, C. Jouglard, G.E. Totten, G.M. Webster and J. Vega, “Residual

Stresses, Distortion and Heat Transfer Coefficients of 7075 Aluminum Alloy Probes Quenched in Water and Polyalkylene Glycol Solutions”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 1118-1124.

279. N.I. Kobasko, V.S. Morganyuk, V.V. Dobrivecher, and G.E. Totten, “Investigation of Regimes of Die

Quenching in High Concentrations of Aqueous Polymer Solutions”, ” in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 652-658..

280. G.S. Sarmiento, X. Chen, J. Vega, G.E. Totten, R. Reynoldson, L. Huynh, and L. Meekisho “A

Comparison of Cooling Curve Analysis Using Inc-Phatran and WinProbe”, ” in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 659-665.

281. M. Narazaki, M. Kogawara, A. Shirayori, S. Fuchizawa and. G.E. Totten, “Experimental and

Numerical Analysis of Cooling Curves During Quenching of Small Probes”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 666-674..

282. H.M. Tensi and G.E. Totten, “Standard for Testing FE-Simulations of Quenching (STA-FE-SIM)”, in

Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 696-700.

283. H.M. Tensi, G.E. Totten and T. Kunzel , “Physics and Technology of Quenching in Fluids – Part I: Physics of Quenching”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 727-730.

284. H.M. Tensi, G.E. Totten and T. Kunzel , “Physics and Technology of Quenching in Fluids – Part II:

Technology of Quenching”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 731-736.

285. L.M. Jarvis and G.E. Totten, “Aqueous Polymer Quenchants: How They Work and What Are the

Differences?”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 807-815.

286. L.M. Jarvis, G.E. Totten, G.M. Webster, and D.G. Hoffman, “Cooling Curve Analysis of Polymer

Quenchants: An Integrated Approach to Quenchant Selection and Bath Maintenance”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 839-846.

287. L. Canale, J.E. Ruggieri, O.R. Crnkovic and G.E. Totten, “Brazilian Quenching Oils: Classification of

Quench Severity”, in Heat Treating – Proceedings of the 20th Conference Vol. 2, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 847-853.

25

288. M. Przylecka, W. Gestwa, and G.E. Totten, “The Influence of Hardening Parameters on Retained Austenite Fraction in the Structure of Case Hardened Layers on Constructional Steels” in Heat Treating – Proceedings of the 20th Conference Vol. 1, Eds. K. Funatani and G.E. Totten, 9-12 October, 2000, ASM International, Materials Park, OH, p. 624-634.

289. H. Liang and G.E. Totten, “Corrosive Wear in Hydraulic Systems: An Overview”, in Hydraulic Failure

Analysis: Fluids, Components and System Effects, ASTM STP 1339, Eds. G.E. Totten, D.K. Wills, and D. Feldman, 2000, American Society for Testing and Materials, West Conshohocken, PA, p. 119 - 133.

290. R.J. Bishop and G.E. Totten, “Design of Proper Inlet Condition to Minimize Hydraulic Pump Wear”,

in Hydraulic Failure Analysis: Fluids, Components and System Effects, ASTM STP 1339, Eds. G.E. Totten, D.K. Wills, and D. Feldman, 2001, American Society for Testing and Materials, West Conshohocken, PA, p 318 - 332.

291. H.Liang, G.E. Totten, K. Mizuno, R.J. Bishop and S. Lemberger, “Fundamental Hydraulic Wear

Processes”, in Hydraulic Failure Analysis: Fluids, Components and System Effects, ASTM STP 1339, Eds. G.E. Totten, D.K. Wills, and D. Feldman, 2001, American Society for Testing and Materials, West Conshohocken, PA, p. 278 - 298.

292. C.G. Fey, G.E. Totten and Y.H. Sun, “Analysis of Common Failure Modes of Axial Piston Pumps”, in

Hydraulic Failure Analysis: Fluids, Components and System Effects, ASTM STP 1339, Eds. G.E. Totten, D.K. Wills, and D. Feldman, 2001, American Society for Testing and Materials, West Conshohocken, PA, p. p. 299 – 317.

293. G.E. Totten, D.K. Wills, and D. Feldman, Eds., Hydraulic Failure Analysis: Fluids, Components and

System Effects, ASTM STP 1339, 2001, American Society for Testing and Materials, West Conshohocken, PA.

294. G.E. Totten, R.J. Bishop and L. Xie, “Bench Tests to Evaluate Hydraulic Fluid Lubrication: A

Review”, Bench Testing of the Lubrication and Wear Properties of Industrial Fluids Used in Machinery Applications, STP 1404 , G.E. Totten, L.D. Wedeven, J.R. Dickey and M. Anderson, 2001, American Society for Testing and Materials, West Conshohocken, PA, , p. 33-50.

295. G.E. Totten, L.D. Wedeven, J.R. Dickey and M. Anderson, Bench Testing of the Lubrication and Wear

Properties of Industrial Fluids Used in Machinery Applications, STP 1404, 2001, American Society for Testing and Materials, West Conshohocken, PA..

296. K.V. Krishnamurthy, G.E. Totten and G.M. Webster, “Computerized Steel Hardness Predictions

Based on Cooling Curve Analysis”, Proc. The 6th ASM Heat Treatment Conference, 2-4 Sept 2000, Chennai, India.

297. N. Gopinath, G.E. Totten and G.M. Webster, “Polymer Quench Bath Maintenance: The Role of

Cooling Curve Analysis”, Proc. The 6th ASM Heat Treatment Conference, 2-4 Sept 2000, Chennai, India.

298. G.E. Totten, R.J. Bishop, R. Suzuki and Y. Tanaka, :Air Entrainment – How it Happens, How to

Avoid It”, Hydraulics & Pneumatics, 2001, July, p. 39-40, 52-53. 299. G.E. Totten, H.M. Tensi and G.M. Webster, “Fluid Flow Sensors for Industrial Quench Baths: A

Literature Review”, 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, 12-14 September 2001, Dubrovnic - Cavtat, Croatia, (Croatian Society for Heat Treatment and Surface Engineering, Ivana Lucica 1, Zagreb, Croatia), p. 13-24.

300. H.M. Tensi, G.E. Totten, G.M. Webster, M. Meindl, and K. Lainer, “Development and Technology

Overview of a Fluid Flow Sensor (Sonde) for Commercial Quench Tanks”,8th Seminar of the

26

International Federation for Heat Treatment and Surface Engineering, 12-14 September 2001, Dubrovnic - Cavtat, Croatia, (Croatian Society for Heat Treatment and Surface Engineering, Ivana Lucica 1, Zagreb, Croatia), p. 35-43

301. I. Felde, T. Reti, S. Segerberg, J. Bodin and G.E. Totten, “Characterization of Quenching Performance

by Using Computerized Procedures and Data Base of Heat Treatment Processes”, 8th Seminar of the International Federation for Heat Treatment and Surface Engineering, 12-14 September 2001, Dubrovnic - Cavtat, Croatia, (Croatian Society for Heat Treatment and Surface Engineering, Ivana Lucica 1, Zagreb, Croatia), p. 309-316.

302. G. Sánchez Sarmiento, D.M. Coscia, C. Jouglard, G.E. Totten y G.M. Webster: "Distorsión y

tensiones residuales en probetas de aluminio sometidas a tratamiento térmico". Proceedings of the Second Argentininien Conference of Abaqus Users, Buenos Aires, September 10-11, 2001. pp. 1-11.

303. G. Sánchez Sarmiento, M. Castro, G.E. Totten y G.W. Webster: "Modelización de tensiones

residuales en el tratamiento térmico de aceros de resortes". Proceedings of the Second Argentininien Conference of Abaqus Users, Buenos Aires, September 10-11, 2001. pp. 119-129.

304. I. Felde, T. Reti, G.S. Sarmiento, G.E. Totten, and X.L. Chen, “Effect of Smoothing Methods on the Results of Different Inverse Modeling Techniques”, in Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 76-83.

305. I. Felde, T. Reti, S. Segerberg, J. Bodin and G.E. Totten, “Characterization of Quenching Performance

by Using Computerized Procedures and Data Base of Heat Treatment Processes”, in Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 93-96.

306. H.M. Tensi, A. Haas, K. Lainer ,G.E. Totten, and G.M. Webster, , “Sensor Tip Optimization for a

Thermal Anemometer for Determining Convection Intensity in Quench Baths”, in Heat Treating – Proceedings of the 21st Conference , Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 1-7

307. G.E. Totten, G.M. Webster, and H.M. Tensi, “Fluid Flow Sensors for Industrial Quench Baths: A

Literature Review”, in Heat Treating – Proceedings of the 21st Conference,Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p.122-128.

308. A.C. Canale, L. Canale, J.E. Ruggieri, G.E. Totten, and G.M. Webster, “Quenchant Testing Using

Different Laboratory Agitation Systems”, in Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 135-143.

309. G. Sanchez-Sarmiento, M. Castro, G.E. Totten, G.M. Webster, L. Jarvis, and M.F. Cabré “Modeling

Residual Stresses in Spring Steel Quenching”, in Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 191-200.

310. M. Przylecka, M. Gestwa G.E. Totten, and G.M. Webster, “Polymer Quenching Media Selection”, in

Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 201-206.

311. M. Przylecka, M. Gestwa, G.E. Totten, and G.M. Webster, “Polymer Quenchants and Diffusion Layer

Properties”, in Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 207-213.

27

312. G.E. Totten and G.M. Webster, “Prof. Dr. Hans M. Tensi: Importance of the Influence of Wetting Behavior on the Quenching Process”, in Heat Treating – Proceedings of the 21st Conference, Eds. S. Shrivastava and F. Specht, 5-8 November, 2001, ASM International, Materials Park, OH, p. 14-24.

313. G.E. Totten, M. Narazaki and G.M. Webster,“Quench Process Related Distortion Control Problems:

An Overview”, 10th International Induction Heating Seminar, Inductoheat Corp., 32251 North Avis Drive, Madison Heights, MI 48071, 17-19 October 2001, Clearwater Beach, Florida.

314. G.E. Totten, C.E. Bates, G.M. Webster and D.S. MacKenzie, “Industrial Use of Quench Factor

Analysis: Application as a Specification Procedure for Quenchant Qualification”, in Advances in the Metallurgy of Aluminum Alloys – Proceedings of the James T. Staley Honorary Symposium on Aluminum Alloys, ed. M. Tiryakioglu, ASM International, Materials Solutions 2001, November 5-8, Indianapolis Convention Center, Indianapolis, IN, p.204-212.

315 R.J. Bishop, C.G. Fey, R. Michael, H.M. Melief and G.E. Totten , “Development of the Rexroth High Pressure Piston Pump Test for Hydraulic Fluid Qualification”, 13th International Colloquium Tribology, Lubricants, Materials and Lubrication Engineering, Vol. III, Ed. W.J. Bartz, Technische Akademie Esslingen, January 15-17, 2002, p. 2091-2100. 316. M. Przylecka, W. Gestwa, and G.E. Totten, “Surface Modification Design: Carburizing With Atmospheres”, SAE Technical Paper Series, Paper Number 2002-01-1505, 2002. 317. M. Przylecka, W. Gestwa, and G.E. Totten, “Structure of Carburized Layers With High Wear Resistance”, SAE Technical Paper Series, Paper Number 2002-01-1392, 2002. 318. M. Przylecka, W. Gestwa, and G.E. Totten, “The Influence of Different Cooling Media On Properties of Carburized Layers”, SAE Technical Paper Series, Paper Number 2002-01-1481, 2002. 319. J.V. Sherman and G.E. Totten, “Food-Grade Fire-Resistant Water Glycol Hydraulic Fluids:, SAE Technical Paper Series, Paper Number 2002-01-1504, 2002. Also co-published in Proceed.of the 49th National Conf. on Fluid Power, March 19-21, 2002, Paper Number NCFP 102.20.12, p. 511-520. 320. R.J. Bishop, B. Ashraf and G.E. Totten, “Assessment of the Eaton V-104 Vane Pump as an Antiwear Lubrication Tester”, SAE Technical Paper Series, Paper Number 2002-01-1429, 2002. Also co- published in Proceed. of the 49th National Conf. on Fluid Power, March 19-21, 2002, Paper Number NCFP 102-10.6, p. 293-302. 321. G.E. Totten, G.M. Webster and H.M. Tensi, “Fluid Flow Sensors for Industrial Quench Baths: A: Literature Review”, Heat Treatment of Metals, 2002, No. 1, p. 6-10. 322. L. Canale, J. Ruggieri, O.R. Crnkovic and G.E. Totten, “Quenching Oils: Classification of Quench Severity”, Heat Treatment of Metals (China), 2002, Vol. 27. No. 2, p. 48-52. 323. G.Totten, M. Howes and T. Inoue, Eds., Handbook of Residual Stress and Deformation of Steel, 2002, ASM International, Materials Park, OH. 324. M. Narazaki, G.E. Totten and G,M. Webster, “Hardening by Reheating and Quenching”, in Handbook

of Residual Stress and Deformation of Steel, Eds. G.E. Totten, T. Inoue, and M.A.H. Howes 2002, ASM International, Materials Park, OH, p. 248-295.

325. G.E. Totten, S.R. Westbrook, R.J. Shah Eds., Fuels and Lubricants Handbook: Technology, Properties, Performance and Testing,, 2003, ASTM International, West Conshocken, PA, 1087 pgs. 326. D.R. Garg, G.E. Totten and G.M. Webster, “Compressor Lubricants”, in,Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing G.E. Totten, S.R.Westbrook, R.J. Shah

28

Eds, 2003, ASTM International, West Conshocken, PA, p. 383-412. 327. B. Liscic, H.M. Tensi, G.E. Totten and G.M. Webster, “Non-Lubricating Process Fluids: Steel Quenching Technology”, in Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing , G.E. Totten, S.R. Westbrook, R.J. Shah Eds , 2003, ASTM International, West Conshocken, PA., p. 587-634. 328. R. Michael, H. Melief, C.G. Fey, G.E. Totten and R.J. Bishop, “Development of the Rexroth High-Pressure Piston Pump Test for Hydraulic Fluid Qualification”, SAE Technical Paper Series, Paper Number 2002—01-1425, 2002,Also co-published in Proceed. of the 49th National Conf. on Fluid Power, March 19-21, 2002, Paper Number NCFP 102-10.4, p. 281-291. 329. John Fuhr, Jim Oettinger, G.E. Totten, and G.M. Webster, “Non-Lubricating Process Fluids:

Heat Transfer Fluids”, in ,Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing G.E. Totten, S.R. Westbrook, R.J. Shah Eds , 2003, ASTM International, West Conshocken, PA., p. 573—586. 330. S. Brunett, G.E. Totten and P.L. Matlock, “Hydrocarbons for Chemical and Specialty Uses”,in Fuels and LubricantsHandbook: Technology,Properties, Performance and Testing, G.E. Totten, S.R. Westbrook, R.J. Shah Eds , 2003, ASTM International, West Conshocken, PA., p. 185-197. 331. H. Liang, G.E. Totten and G.M. Webster, “Lubrication Fundamentals”,in ,Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing, G.E. Totten, S.R. Westbrook, R.J.

Shah Eds , 2003, ASTM International, West Conshocken, PA, p. 909-961.. 332. G.E. Totten, N.I. Kobasko, M.A. Aronov and J. Powell, “Overview of Intensive-Quenching

Processes”, Industrial Heating, 2002, Vol. 69, No. 4 (April), p. 31-33. 333. G.E. Totten, H.M. Tensi and G.M. Webster, “Fluid Flow Sensors for Industrial Quench Baths: A Literature Review”, Heat Treatment of Metals (China), 2002, Vol. 27, No. 5, p. 27-32. 334. G.E. Totten and R.J. Bishop Jr., “Natural Gas Compressors and Their Lubrication”, Machinery Lubrication, 2002, May-June, p. 58-63. 335. G.E. Totten, H.M. Tensi and A. Stich, “Temperature Measurement Accuracy in Cooling Curve Analysis“, Heat Treat Progress, 2002, Vol. 2, No.4 , p. 45-49. 336. G.E. Totten and H.M. Tensi, “Using Conductance Data to Characterize Quenchants”, Heat Treat Progress, 2002, Vo. 2. No. 5, p. 39-42. 337. H.M. Tensi, A. Haas, K. Lainer, G.E. Totten, “Sensor Tip Optimization for Determining Convection Intensity in Quench Baths”, Heat Treatment of Metals (China), 2002, Vol. 27, No. 7, p. 39-43. 338. R. Michael, H.M. Melief, C.G. Fey, G.E. Totten and R.J. Bishop, “Development of a New High- Pressure Piston Pump Test for Hydraulic Fluid Qualification”, Proceedings of 5th JHPS Fluid Power Symposium – Vol. 1, Nara Japan, Ed. S. Yokota, Japanese Fluid Power Society, Tokyo, Japan, November 12-15, 2002, p. 245-250. 339. G.E. Totten, G.H. Kling, P.W. Offutt, R.J. Bishop and J.V. Sherman, “Development of a Standard High-Pressure Hydraulic Piston Pump Test: Status of ASTM D.02.N.07 Piston Pump Task Force Activities”, Proceedings of 5th JHPS Fluid Power Symposium – Vol. 1, Nara Japan, Ed. S. Yokota, Japanese Fluid Power Society, Tokyo, Japan, November 12-15, 2002, p. 277-282. 340. G.E. Totten, J.V. Sherman, “Current Needs and Developments in Hydraulic Fluid Technologies”, Proceedings of 5th JHPS Fluid Power Symposium – Vol. 2, Nara Japan, Ed. S. Yokota, Japanese Fluid Power Society, Tokyo, Japan, November 12-15, 2002, p. 395-400.

29

341. G.E. Totten, L.de C.F. Canale, N.I. Kobasko, J.A. Powell and M.A. Aronov, “Têmpera Intensiva: Levantamento Histórico de um Processo Usualmente Desconhecido”, SAE Technical Paper, Paper Number 2002-01-3398, Sao Paulo, Brazil, 2002. 342. N.I. Kobasko, G.E. Totten, L. de C.F. Canale, J.A. Powell and M.A. Aronov, “Fundamentos Metalúrgicose Levantamento dos Processos de Têmpera Intensiva”, SAE Technical Paper, Paper Number 2002-01-3399, Sao Paulo, Brazil, 2002. 343. Y. Tanaka, R. Suzuki, G.E. Totten, R.J. Bishop and L.C.F. Canale, “Projeto e Uso de um Inédito Sistema de Eliminação de Bolhas (Bublle Eliminator) para Resolver os Problemas de Fluidos Aerados em Sistemas Hidráulicos”, SAE Technical Paper, Paper Number 2002-01-3400, Sao Paulo, Brazil, 2002. 344. G.E. Totten, G.M.Webster and R.J. Bishop, “Comparison of Vickers V-104C and 20VQ5 Vane Pump Wear Rates for Various Water-Glycol Hydraulic Fluids”, Tribotest Journal, 2002, No. 8, p. 339-350. 345. R. Suzuki, Y. Tanaka, G.E. Totten and R.J. Bishop, “Removing Entrained Air In Hydraulic Fluids and Lubrication Oils”, Machinery Lubrication, 2002, July-August, p. 56-62. 346. G.E. Totten and R.J. Bishop, “Lubricant Requirements, Properties and Maintenance for Natural Gas Compressors”, Machinery Lubrication, 2002, September-October, p. 24-29. 347. G.E. Totten and D.S. MacKenzie, Eds., Handbook of Aluminum: Vol. 1 - Physical Metallurgy and

Processes, 2003, Marcel Dekker Inc., New York, NY.

348. G.E. Totten, C.E. Bates and G.N. Webster, “Quenching”, in Handbook of Aluminum: Vol. 1- Physical Metallurgy and Processes,, G.E. Totten and D.S. MacKenzie Eds. 2003, Marcel Dekker Inc., New York, NY, p. 971-1062.

349. G.E. Totten and D.S. MacKenzie Eds., .Handbook of Aluminum: Vol. 2 – Alloy Production and Materials Manufacturing,, 2003, Marcel Dekker, New York, NY.

350. Małgorzata Przyłęcka; Wojciech Gęstwa, and George E.Totten, “Structure and Properties of the Hardened Carburized Layer of Low-Carbon Chromium-Nickel Steel After Quenching in Different Media – Part I”, IFHTSE 2002 Congress, Columbus, Ohio, 2003, ASM International, Materials Park, OH, 98-106. 351.Małgorzata Przyłęcka; Wojciech Gęstwa, and George E.Totten, “ Influence of Chemical Composition and Quenching Media on Structure and Properties of Hardened Carburized Layer of Low-Carbon Chromium-Manganese Steel – Part II”, ”, IFHTSE 2002 Congress, Columbus, Ohio,2003, ASM International, Materials Park, OH, 308-314.. 352. Małgorzata Przyłęcka; Wojciech Gęstwa, and George E.Totten, “Influence of Heat Treatment on Structure and Properties of Carburized Low-Carbon Chromium Steel”, IFHTSE 2002 Congress, Columbus, Ohio, 2003, ASM International, Materials Park, OH, 315-323.. 353. G.E. Totten, M. Narazaki, and R.R. Blackwood, “Failures Related to Heat Treating Operations”, in ASM Handbook, Vol. 11 – Failure Analysis and Prevention, 2002, ASM International, Materials Park, OH, p. 192-223. 354. M. Przylecka, W. Gestwa, and G.E. Totten, “The Modelling of Retained Austenite in the Carburized Layer”, Proceedings of the 2nd International Conference of Thermal Process Modelling and Computer Simulation, Société Francaise de Métallurgie et de Matériaux (SF2M), Les Fontenelles – 1

– rue de Craĭova, F-92024 Nanterre Cedex, France, 2003, J. Phys. IV France, 2004, Vol. 120, p. 121-128.

30

355. M. Przylecka, W. Gestwa and G.E. Totten, “Modelling of Phase Transformation and Hardening of Carbonitrided Steels”, Proceedings of the 2nd International Conference of Thermal Process Modelling and Computer Simulation, Société Francaise de Métallurgie et de Matériaux (SF2M), Les Fontenelles

– 1 rue de Craĭova, F-92024 Nanterre Cedex, France, 2003, J. Phys. IV France, 2004, Vol. 120, p. 129-136.

356. R.J. Bishop, G.E. Totten and C.E. Fey, “Analysis of a Piston Pump Failure”, Proceedings of the 57th Meeting of the MFPT (Machinery Failure Prevention Technology) Society, Impact of Prognpostics on Organizational Success; Compiled by H.C. Pusey, S.C. Pusey and W.R. Hobbs), April 14-18, 2003, Virginia Beach, VA,, p. 189-198. 357. R.J. Bishop, G.E. Totten and C.E. Fey, “Common Failure Modes in Axial Piston Pumps”, Proceedings of the 57th Meeting of the MFPT (Machinery Failure Prevention Technology) Society, Impact of Prognpostics on Organizational Success; Compiled by H.C. Pusey, S.C. Pusey and W.R. Hobbs), April 14-18, 2003, Virginia Beach, VA, p. 357-366. 358. G.E. Totten, G.M. Webster and D.A. Wachter, “Quenchant Fundamentals: Condition Monitoring of Quench Oils”, Practicing Oil Analysis, 2003, January-February, p. 26-31. 359. R.J. Bishop and G.E. Totten, “Maintenance and Analysis of Water Glycol Hydraulic Fluids”, Machinery Lubrication, 2003, January-February, p. 24-31. 360. N.I. Kobasko, V.S. Morhunyuk, V.V. Dobrivecher, and G.E. Totten, “Intensive Quenching Creates Compressive Stresses at the Surface in Through Hardened Steel Parts”, Proceedings of Heat Treatment and Surface Engineering in the Production of Automotive Components, Bangkok, Thailand, January 27-30, 2003, Published by National Metals and Materials Technology Center (MTEC), Bangkok, Thailand. 361. N.I. Kobasko, V.S. Morhunyuk, V.V. Dobrivecher, and G.E. Totten, “Optimization of Different Kinds of Intensive Quenching Processes by Computer Simulation”, Proceedings of Heat Treatment and Surface Engineering in the Production of Automotive Components, Bangkok, Thailand, January 27-30, 2003, Published by National Metals and Materials Technology Center (MTEC), Bangkok, Thailand. 362. M.C. Cunha, L.C.F. Canale, W.W. Bose F., and G.E. Totten, “The Influence of Process Parameters

on the Short Crack Growth Behavior in the Carburized Case of a DIN 20MnCr5 Steel”, Proceedings of Heat Treatment and Surface Engineering in the Production of Automotive Components, Bangkok, Thailand, January 27-30, 2003, Published by National Metals and Materials Technology Center (MTEC), Bangkok, Thailand.

363. Y. Tanaka, R. Suzuki, G.E. Totten and R.J. Bishop, “Use of a Bubble Eliminator for Air Removal in Hydraulic Systems”, Lubrication & Fluid Power, 2003, Vol. 4., No. 1, p. 13-19. 364. K. Funatani, L.C.F. Canale, and G.E. Totten, “Surface Modification by Coat Forming”, Paper Presented at the Lubrication and Fluid Power Conference and EXPO held in Indianapolis, May 4-8, 2003, Proceedings Publisblished by Lubrication & Fluid Power, Pensacola, FL , p. 109-117. 365. Y. Tanaka, R. Suzuki, G.E. Totten and R.J. Bishop, “Operation and Typical Application Overview of the Use of Bubble Eliminators for Deaeration of Hydraulic and Turbine Oils”, Paper Presented at the Lubrication and Fluid Power Conference and EXPO held in Indianapolis, May 4-8, 2003, Proceedings Publisblished by Lubrication & Fluid Power, Pensacola, FL, p. 146-156. 366. M. Grenier, L.C.F. Canale, O. Crnkovic, and G.E. Totten, “Rapid Tempering and Stress Relief Via High-Speed Convection Heating”, Industrial Heating, 2003, Vol. 70, No. 5, p. 40-45.

31

367. L.C.F. Canale, G.E. Totten, N.I. Kobasco, M.A. Aronov, and J. Powell“Intensive Quenching with Intensi quench®. What is it?”,I Conferência Brasileira sobre TEMAS DE TRAITAMENTO TÉRMICO, 25-27 de junho 2003, Indaiatuba – SP, Brazil. 368. L.C.F. Canale, G.E. Totten and O.R. Crnkovic, “Immersion Time Quenching System (ITQS) Technology to Facilitate Aqueous-Polymer Quenchant Replacement of Quench Oils”, I Conferência Brasileira sobre TEMAS DE TRAITAMENTO TÉRMICO, 25-27 de junho 2003, Indaiatuba – SP, Brazil. 369.M. Grenier, L.C.F. Canale, O.R. Crnkovic, and G.E. Totten, “Immersion Time Quenching System (ITQS) Technology to Facilitate Aqueous-Polymer Quenchant Replacement of Quench Oils”, I Conferência Brasileira sobre TEMAS DE TRAITAMENTO TÉRMICO, 25-27 de junho 2003, Indaiatuba – SP, Brazil. 370.R. Suzuki, L.C.F.Canale, G.E. Totten and O.R. Crnkovic, “Operation and Typical Applications of Bubble Eliminators for Fluid Deaeration”, I Conferência Brasileira sobre TEMAS DE TRAITAMENTO TÉRMICO, 25-27 de junho 2003, Indaiatuba – SP, Brazil. 371. J. Smith, O.R. Crnkovic, L.C.F.Canale, and G.E. Totten, Use of SBS Corporation* Smart Filter with Aquasense to Monitor and Control Water Content in Petroleum-Based Quench Oils”, .I Conferência Brasileira sobre TEMAS DE TRAITAMENTO TÉRMICO, 25-27 de junho 2003, Indaiatuba – SP, Brazil. 372. H.M. Tensi, G.E. Totten, and L.C.F. Canale, “The Quenching Process: An Overview of the Fundamental Physical Properties of Liquid Quenching”, 58th Congresso Annual Da ABM, 21-24 julho de 2003, Rio De Janeiro, Brazil, p. 3337-3347. 373. L. Grenier, L.C.F. Canale, O.R. Crnkovic and G.E. Totten, “Rapid Tempering and Stress Relief: Application of High-Speed Convection Heating”, 58th Congresso Annual Da ABM, 21-24 julho de 2003, Rio De Janeiro, Brazil, p. 3348-3361. 374. N.I. Kobasko, M.A. Aronov, L.C.F. Canale, and G.E. Totten, “Metallurgy of Intensive Quenching Process and Implications with Respect to Steel Properties”, 58th Congresso Annual Da ABM, 21-24 julho de 2003, Rio De Janeiro, Brazil, p. 3362-3380. 375. G.E. Totten, M. Przylecka and W. Gestwa, “Polymer Quenchants: A Flexible Cooling Medium for Carburized Steels”, 58th Congresso Annual Da ABM, 21-24 julho de 2003, Rio De Janeiro, Brazil, p. 3501-3510. 376. G.E. Totten, “The Future of Heat Treating: What Are the Most Critical Issues and What Will the Future Look Like?”, 58th Congresso Annual Da ABM, 21-24 julho de 2003, Rio De Janeiro, Brazil, p. 3451-3457. 377. G.E. Totten, R.J. Bishop, H.M. Melief, and R. Michael, “Piston Pump Testing for Hydraulic Fluid Qualification”, Lubrication& Fluid Power, 2003, Vol. 4, No. 3, p. 7-19. 378. G.E. Totten, M. Przylecka and W. Gestwa, “Use of Aqueous Polymer Quenchants for Hardening of Carbonitrided Parts”, in Nitriding Technology Theory and Practice”, Ed. A. Nakonieczny, Proceed. of 9th International Seminar International Federation for Heat Treatment and Surface Engineering, Publisher: Institute of Precision Mechanics, Warsaw Poland, 2003, p. 405-414. 379. G.E. Totten, H.M. Tensi and L.C.F. Canale, “Chemistry of Quenching: Part I – Fundamental Interfacial Chemical Processes Involved in Quenching”, In Proc. of 22nd Heat Treating Society Conference and the 2nd Surface Engineering Congress, Eds. N.B. Dahotre, R.J. Gaster, R.A. Hill, O.O.

32

Popoola, 15-17 September 2003, Indianapolis, IN, ASM International, Materials Park, OH, p. 141-147. 380. G.E. Totten, H.M. Tensi and L.C.F. Canale, “Chemistry of Quenching: Part 2 – Fundamental Thermophysical Processes Involved in Quenching”, Proc. of 22nd Heat Treating Society Conference and the 2nd Surface Engineering Congress, 15-17 September 2003, Indianapolis, IN, ASM International, Materials Park, OH, p. 148-155. 381. K. Funatani, L.C.F. Canale, and G.E. Totten, “Chemistry of Quenching: Part 3 – Energy Conservation by Utilization of the Thermal Content in Steel for Surface Modification”, Proc. of 22nd Heat Treating Society Conference and the 2nd Surface Engineering Congress, 15-17 September 2003, Indianapolis, IN, ASM International, Materials Park, OH, p. 148-155. 382. G. Sanchez Sarmiento, M. Castro, G.E. Totten, L. Jarvis, G.M. Webster and M.M. Cabre, “Modeling Residual Stresses in Spring Steel Quenching”, Jinshu Rechuli (Heat Treatment of Metals – China), 2003, Vol. 28, No. 11, p. 47- 51. 383. M. Przylecka, W. Gestwa, G.E. Totten, and J. Olejnik, “Influence of Carbon Content on Structure and Properties of Carburized Steel Using Different Quenchants – Part I”, in Proceed. of 4th International Conference on quenching and the Control of Distortion, 23-24 November 2003, Beijing, China, Chinese Heat Treatment Society, Beijing, China, p. 1-7. 384. M. Przylecka, W. Gestwa, G.E. Totten, and J. Olejnik, “Influence of Carbon Content on Structure and Properties of Carburized Steel Using Different Quenchants – Part II”, in Proceed. of 4th International Conference on quenching and the Control of Distortion, 23-24 November 2003, Beijing, China, Chinese Heat Treatment Society, Beijing, China, p. 8-12. 385. V. Li and G.E. Totten, “Computational Modeling of Quenching and Distortion”, in Proceed. of 4th International Conference on quenching and the Control of Distortion, 23-24 November 2003, Beijing, China, Chinese Heat Treatment Society, Beijing, China, p. 81-86. 386. G.E. Totten, M. Gergely and S. Szilvia, “Software Tool for Heat Treaters and Material Engineers: Equist 2001 for Windows, the Database of Standard Steels”, in Proceed. of 4th International Conference on quenching and the Control of Distortion, 23-24 November 2003, Beijing, China, Chinese Heat Treatment Society, Beijing, China, p. 193-200. 387. N.I. Kobasko, G.E. Totten, L.C.F. Canale, J.A. Powell and M.A. Aronov, “Intensive Quenching Process Classification and Case Histories”, in Proceed. of 4th International Conference on Quenching and the Control of Distortion, 23-24 November 2003, Beijing, China, Chinese Heat Treatment Society, Beijing, China, p. 201-208. 388. A.F. Farah, L.C.F. Canale, O.R. Crnkovic, M.R. Fernandes, and G.E. Totten, “Oxidation Studies in Vegetable Oils During Utilization as Cooling Media in Heat Treatment Processes”, in Proceed. of 4th International Conference on quenching and the Control of Distortion, 23-24 November 2003, Beijing, China, Chinese Heat Treatment Society, Beijing, China, p. 237-242. 389. G.E. Totten, L. Xie and K. Funatani, Eds., Handbook of Mechanical Alloy Design, 2003, Marcel Dekker Inc., New York, NY. 390. M.Przylêcka, W.Gestwa, N.I.Kobasko, G.E.Totten, M.A.Aronov, J.Powell; "Intensive Quenching – Carburizing Processes", 12 th International Conference Achievements in Mechanical & Materials Engineering AMME'2003; 7 -10 December 2003; Gliwice - Zakopane; Poland, p. 749-754. 391. G.E. Totten, L. Xie and K. Funatani, Eds., Modeling and Simulation for Material Selection and Mechanical Design, 2004, Marcel Dekker Inc., New York, NY.

33

392. G.E. Totten, “Heat Treating in 2020: What are the Most Critical Issues and What Will the Future Look Like?, Heat Treatment of Metals, 2004, Vol. 31, No. 1, p. 1-3. 393. G.E. Totten, M. Przylecka, W. Gestwa, and D. Pye, “Chapter 29 – Heat Treatment”, in Smithells Metals Reference Book Eighth Edition ,Eds. W.F. Gale and T.C. Totemeier, 2004, Elsevier, New York, NY, p. 29-1 – 29-66. 394. K. Funatani, L.C.F. Canale and G.E. Totten, “Coat Forming Oils Do More Than Cool”, Heat Treating Progress, 2004, Vol. 4, No. 2, p. 33-35. 395. G.E. Totten, “In Context: A Timeline of Highlights from the Histories of ASTM Committee D02 and the Petroleum Industry”, ASTM Standardization News, 2004, June, p. 18-27. 396. V. Raghunathan, N. Gopinath, G.E. Totten and L.C.F. Canale, “Modern Mesh Belt Sintering Furnaces Meet Emerging Demands”, Industrial Heating, 2004, June, p. 41-44. 397.G.E. Totten and H. Liang, Eds., Surface Modifications and Mechanisms: Friction, Stress and Reaction Engineering, 2004, Marcel Dekker, New York, NY. 398. G.E. Totten and H. Liang, Eds., Mechanical Tribology: Materials, Characterization and Applications, 2004, Marcel Dekker, New York, NY. 399. G.E. Totten, K. Funatani and L. Xie, Eds., Handbook of Metallurgical Process Design, 2004, Marcel Dekker, New York, NY. 400. L.C.F. Canale, G.E. Totten and D. Pye, “Heat-Treating Process Design”, in Handbook of Metallurgical Process Design, Eds. G.E. Totten, K. Funatani and L. Xie, 2004, Marcel Dekker, New York, NY, p. 453-505. 401. M. Przylecka, W. Gestwa, K. Funatani, G.E. Totten and D. Pye, “Design of Carburizing and Carbonitriding Processes”, in Handbook of Metallurgical Process Design, Eds. G.E. Totten, K. Funatani and L. Xie, 2004, Marcel Dekker, New York, NY, p. 507-543. 402.H. Liang, G. Xu, and G. Totten,"Mechanical and Corrosive Wear of Heat Treated Materials and Protection with Coating - An Overview",Inżynieria Powierzchni (Surface Engineering), 2004, No. 3, p. 3-13. 403. Guizhen Xu, Hong Liang, George Totten, and Jiajun Liu, “Engine Tribology and Surface Modification Technology”, Inżynieria Powierzchni, 2004, 4, p. 8-18. 404. L.C.F. Canale and G.E. Totten, “Quenching Technology: A Selected Overview of the Current State- of-the-Art”, 59o Congresso Annual Da ABM/59th Annual Congress International, 17-21 julho de 2004, Sao Paulo, Brazil, p. 3705-3716. . 405. L.C.F. Canale, G.E. Totten, R.R. Blackwood, L.M. Jarvis and D.G. Hoffman, “An Overview of Non- Quench -Related Problems Often Attributed to the Quenchant and Quenching Process”, 59o Congresso Annual Da ABM/59th Annual Congress – International, 17-21 julho de 2004, Sao Paulo, Brazil, p. 3692-3704 . 406. G.E. Totten, “Heat Treating: Current Stat us and Projected Future Technology Developments”, 2003, ASTRA-2003 - International Conference on Surface Modification Technologies (SMT- XVII)/Current Status Seminar of the International Federation of Heat Treatment and Surface Engineering (IFHTSE), Hyderabad, India, November 3-6, 2003, p. 20-23. 407. G.E. Totten, N.I. Kobasko, N. Gopinath, L.C.F. Canale, “Intensive Quenching as a Viable, Energy Efficient, Environmentally Friendly Replacement for Carburizing and Induction Heat Treatment”,

34

2003, ASTRA-2003 - International Conference on Surface Modification Technologies (SMT- XVII)/Current Status Seminar of the International Federation of Heat Treatment and Surface Engineering (IFHTSE), Hyderabad, India, November 3-6, 2003, p 71-75. 408. L.C.F. Canale and G.E. Totten, “Eliminate Quench Cracking with Uniform Agitation”, Heat Treating Progress, 2004, July/August, p. 27-30. 409. N.I. Kobasko and G.E. Totten, :Quench System Design”, in New Processes of Heat Treating, Eds. Mecludov and V.M. Shuleyev, from Conference in Karkov, 2004, Published by Ukrainian Academy of Sciences, Kiev, Ukrain, p. 94-111. 410. N.I. Kobasko, M.A. Aronov, J.A. Powell, L.C.F. Canale and G.E. Totten, “Intensive Quenching Process Classification and Applications”, Heat Treatment of Metals, 2004, Vol. 31, No. 3, p. 51-58. 411. N.I. Kobasko and G.E. Totten, “Design of Industrial Quenching Processes”, WSEAS (World Scientific and Engineering Academy and Society) and IASME Conferences, Corfu, Greece, August 17-19, 2004, Paper Number 488-512. see: http://www.wseas.com/ 412. L.C.F. Canale and G.E. Totten, “Elimination of Quench Cracking by Controlling Agitation Uniformity”, Transactions of Materials and Heat Treatment (China), Proceed. of the 14th IFHTSE Congress, Shanghai, China, October 2004, Vol. 25, No. 5, p. 457-461. 413. I. Felde, T. Reti, S. Segerberg, J. Bodin, G.S. Sarmiento and G.E. Totten, “Numerical Methods for Safeguarding the Performance of the Quenching Process”, Transactions of Materials and Heat Treatment (China), Proceed. of the 14th IFHTSE Congress, Shanghai, China, October 2004, Vol. 25, No. 5, p. 519-521. 414. N.I. Kobasko and G.E. Totten, “Design of Industrial Quenching Processes”, Transactions of Materials and Heat Treatment (China), Proceed. of the 14th IFHTSE Congress, Shanghai, China, October 2004, Vol. 25, No. 5, p. 527-530. 415. L.C.F. Canale, G.S. Sarmiento, G.E. Totten, I. Felde and R.N. Penha, “Characterization of the Surface Temperatures and Heat Transfer Properties of Fresh and Used Vegetable Oils Relative to Mineral Oil using HT-Mod and Abaqus”, Abaqus – Cuarta Reunion Argentina de Usuarios de Abaqus, Buenos Aires, Argentina, November 11-12, 2004. 416. G.E. Totten, N. Gopinath, and L.C.F. Canale, “Heat Treating 2005 – Quenching Technology: Current Technology Advancements”, Proceedings of ASM International Pune Chapter Heat Treat Show and Technical Conference, 21-23 February, 2005, Pune, India, pp. 4-15. 417. G.E. Totten and N. Gopinath, “Fluid Sensors for Quench Baths”, Proceedings of ASM International Pune Chapter Heat Treat Show and Technical Conference, 21-23 February, 2005, Pune, India, pp. 16-25. 418. G.E. Totten, R.J. Bishop Jr., R. Suzuki, and Y. Tanaka, “Applications and Operation of the Novel Bubble Eliminator Device for Deaeration of Hydraulic and Turbine Oils”, Proceedings of the 50th National Conference on Fluid Power, March 16-18, 2005, Las Vegas, NV, National Fluid Power Association, Milwaukee, WI, Paper Number NCFP 105-13.2 . 419. R.J.BishopJr. and G.E.Totten,“Hydraulic Fluid Cavitation and the Micro-Diesel Effect: An Overview of Mechanisms and Associated Fluid and System Damage”, Proceedings of the 50th National Conference on Fluid Power, March 16-18, 2005, Las Vegas, NV, National Fluid Power Association, Milwaukee, WI, Paper Number NCFP 105-17.3

35

420. L.C.F. Canale, G. Xu, H. Liang, J. Liu, and G.E. Totten, "Surface Engineered Coatings and Surface Additive Interactions for Boundary Film Formation to Reduce Frictional Losses in the Automotive Industry: A Review". SAE Technical Paper Series, Paper Number 2005 – 01 - 2180, Rio de Janeiro ,Brazil, May, 2005. 421. L.C.F. Canale, K. Funatani and G.E. Totten, “Lubrication Applications of Coat Forming Additives”, SAE Technical Paper Series, Paper Number 2005 – 01-2181, Rio de Janeiro ,Brazil, May, 2005. 422. L. de C.F. Canale, M.R. Fernandes, S.C.M. Augustinho, G.E. Totten and A.F. Farah, “Oxidation of Vegetable Oils and its Impact on Quenching Performance”, Int. J. Materials and Product Technology, 2005, Vol. 24, No. 1-4, p. 101-125. 423. L. de C.F. Canale and G.E. Totten, “Overview of Distortion and Residual Stress, due to Quench Processing – Part I: Factors Affecting Quench Processing”, Int. J. Materials and Product Technology, 2005, Vol. 24, No. 1-4, p. 4-52. 424. W. Gestwa, M. Przylecka and G.E. Totten, “Use of Aqueous Polymer Quenchants for Hardening of Carbonitrided Parts”, Int. J. Materials and Product Technology, 2005, Vol. 24, No. 1-4, p. 126 -141. 425. M. Grenier. R. Gingras and G.E. Totten, “Rapid Stress Relief and Tempering”, Gear Solutions, 2005, May, p. 26-33. 426. L.C. F. Canale and G.E. Totten, “Vegetable Oil Based Quenchant Compositions: A Review of Fluid Chemistry and Quenching Results”, in Proceedings of 2nd International Heat Treatment and Surface Engineering in Automotive Applications, Eds. S. Gallo, B. Liscic and P.L. Antona, 2005, Riva Del Garda, Italy, Associazione Italiana di Metallurgia, Milano, Italy, Paper No. 009. 427. L.C.F. Canale, A.C. Canale, M.R. Fernandes, S.C.M. Agustinho, G. S. Sarmiento and G.E. Totten, “Evaluation and Impact of OxidativeStability on The Quenching Performance of Castor Oil and Soybean Oil”, in Proceed. of 2nd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, Eds. S. Gallo, B. Liscic and P.L. Antona, 2005, Riva Del Garda, Italy, Associazione Italiana di Metallurgia, Milano, Italy, Paper No. 010. 428. N.I. Kobasko, M. A. Aronov, J. A. Powell, L.C.F. Canale, and G.E. Totten, “Improved Production of Automotive Parts by Intensive Quench Processing”, in Proceed. of 2nd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, Eds. S. Gallo, B. Liscic and P.L. Antona, 2005, Riva Del Garda, Italy, Associazione Italiana di Metallurgia, Milano, Italy, Paper No. 012. 429. N.I Kobasko, L.C.F. Canale, and G.E. Totten, “Improved Production of Steel Parts by Intensive Quenching”, in1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, Eds. B. Smoljan, H. Jäger, and V. Leskovšek, 2005, Croatian Society for Heat Treatment and Surface Engineering, Zagreb, Croatia, p. 69-76. 430. L.C.F. Canale, An Junqi, G.E. Totten, X. Yao and V. Li, "Energy Saving by an Accelerated Carburizing Process: A Review", 60o Congresso Annual Da ABM/60th Annual Congress, July 25 to July 28, 2005 - Belo Horizonte, Brazil, pp. 3199-3208. 431. L.C.F. Canale, G.S. Sarmiento, G.E. Totten, I. Felde, and R.N. Penha, “Effect of Vegetable Oil Oxidation on The Ability to Harden AISI 1045 and 4140 Steel”, 60o Congresso Annual Da ABM/60th Annual Congress, July 25 to July 28, 2005 - Belo Horizonte, Brazil, pp. 3209-3217. 432. L.C.F. Canale, J.C. Vendramim, G.E. Totten, and E.W. Merheb, “Redução Ou Substituição Dos Ciclos De Cementação Usando O Processo De Têmpera Intensiva”, 60o Congresso Annual Da ABM/60th Annual Congress, July 25 to July 28, 2005 - Belo Horizonte, Brazil, pp. 3238-3245.

36

433. G.E. Totten and L.C.F. Canale, “Polymer Quenchants”, in Encyclopedia of Materials Science and Technology, Eds. K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, and S. Mahajan, 2005, Elsevier, Oxford p. 1-11.ISBN: 0-08-043152-6 434. G.E. Totten, L.C.F. Canale and H. Liang, “Hydraulic Cavitation from a Sonomaterials Perspective:

A Review”, SAE Technical Paper Series, Paper Number 2005-01-4173 E, Sao Paulo, Brazil, November, 2005.

435. L.C.F. Canale, G.E. Totten and An Junqi, “An Accelerated Carburizing Process”, SAE Technical Paper Series, Paper Number 2005-01-4174 E, Sao Paulo, Brazil, November, 2005.

436. R.N. Penha, L.C.F. Canale, G.E. Totten and G.S. Sarmiento, “Simulation of Heat Transfer Properties and Residual Stress Analysis of Cooling Curves Obtained From Quenching Studies”, SAE Technical Paper Series, Paper Number 2005-01-4178 E, Sao Paulo, Brazil, 2005.

437. L.de.C.F. Canale, M.R. Fernandes, S.C.M. Agustinho, G.E. Totten and A.F. Farrah, "Oxidation of Vegetable Oils and its Impact on Quenching Performance", Jinshu Rechuli, 2005, Vol. 30, No. 8, p. 66-80.

438. M. Grenier. R. Gingras and G.E. Totten, “Rapid Tempering Process”, Furnaces International, 2005, September/October, p. 16 and 18. 439. D. Poteet; G.E. Totten and L.C.F. Canale, “Basic Principles of Quench System Design For Induction Hardening”, Conf. Proceedings ASM Heat Treating Society Conference & Exhibition, September 25- 28, 2005, Pittsburgh, PA. 440. B. Smoljan, D. Iljkic, N. Tomasic, I. Felde, G.E. Totten, and T. Reti, “Evaluation of Steel Hardenability By JM®-Test”, 5th Hungarian Conference and Exhibition on Materials Science Testing and Informatics in Balatonfured (9-11th October 2005.), p. 441. D.S. MacKenzie and G.E. Totten Eds., Analytical Characterization of Aluminum, Steel, and Superalloys, 2005, CRC Press, Boca Raton, FL. 442. N. Gopinath and G.E. Totten, “Rapid Gas Cooling In Continuous Normalizing Furnaces”, Industrial Heating, 2005, October, p. 39-40. 443. G.E. Totten, N.I. Kobasko and L.C.F. Canale, “Mechanism of Surface Compressive Stress Formation by Intensive Quenching“, Mecanica Computacional Vol. XXIV, Ed. A. Larreteguy, Buenos Aires, ArgentinaNovember 2005, (Paper also on Internet : http://www.fain.uade.edu.ar/mecom2005/SESION5/Gtotten_Conferencia.pdf ) 444. D. Poteet, G.E. Totten, and L.C.F. Canale, “Designing Quench Systems for Induction Hardening: Part I”, Industrial Heating, 2005, Vol. LXXII, No. 11, November, p. 43- 46. 445. D. Poteet, G.E. Totten, and L.C.F. Canale, “Designing Quench Systems for Induction Hardening: Part II”, Industrial Heating, 2005, Vol. LXXII, No. 12, December, p. 35- 40. 446.Lauralice de Campos Franceschini Canale and George E. Totten, “Quenching Technology: A Selected Overview of the Current State-of-the-Art”, Materials Research, 2005, Vol.8, No.4, p.461-467. 447. R.N. Penha, G.S. Sarmiento and G.E. Totten, “Simulation of Heat Transfer Properties and Thermal Residual Stress from Quenching Studies”, Pequisa e Tecnologia Revista Minerva, 2005, Vol. 2, No. 2, p. 165-172. (ISSN: 1808-6292). 448. G.E. Totten, P. Asthana, S. Ingole, C. P. Leonida, O.M. Patricio, and H. Liang, “Surface Modification using Sonochemistry for Tribological Applications”, 15th International Colloquium, Tribology

37

2006, Ed. W.J. Bartz, Technische Akademie Esslingen (Germany), 17-19 January, 2006. 449. G.E. Totten, L.C.F. Canale, K. Funatani, and M. Fukuhara, “Coat Forming Processes: Utilization of Thermal Energy Released During Heat Treating for Preparation of Coatings with Enhanced Lubricity and Wear Properties”, 15th International Colloquium, Tribology 2006, Ed. W.J. Bartz, Technische Akademie Esslingen (Germany), 17-19 January, 2006. 450. N.I. Kobasko, M.A. Aronov, J.A. Powell, L.C.F. Canale, and G.E. Totten, “Improved Production of Automotive Parts by Intensive Quench Processing”, La Mettalurgia Italiana, 2006, February, p. 1-10. 45\1. Guizhen Helen Xu, Hong Liang, Jiajun Liu, and G. Totten, “Engine Tribology and Surface Modification Technology”, Jinshu Rechuli, (Heat Treatment of Metals (China)), 2006, Vol. 31, No. 2, p. 1-11. 452 R.N. Penha, L.C.F. Canale, G.E. Totten, G.S. Sarmiento, “Simulation of Heat Transfer Properties and Residual Stress Analyses of Cooling Curves Obtained from Quenching Studies” J. ASTM International, 2006, Vol. 3, No. 5, Paper ID No. 13614. 453. G.E. Totten (Ed.), Handbook of Lubrication and Tribology: Volume 1 – Application and Maintenance, Second Edition, 2006, CRC Press - Taylor and Francis Group, Boca Raton, FL. 454. T. Kazama and G.E. Totten, “Chapter 9 – Compressors and Vacuum Pumps”, in Handbook of Lubrication and Tribology: Volume 1 – Application and Maintenance, Second Edition, 2006, CRC Press - Taylor and Francis Group, Boca Raton, FL, p. 9-1 – 9-61. 455. L.C.F. Canale, X. Yao, G.E. Totten, and J.E. Botelho, “Springs: An Overview in Steel Chemistry, Heat Treatment, Residual Stress and Failures”, L.C.F. Canale, X. Yao, G.E. Totten, and J.H. Botelho, “Springs: An Overview in Steel Chemistry, Heat Treatment, Residual Stress and Failures”, 4th Colloquium Internacional de Suspensões e Implementos Rodoviários & Mostra de Engenharia (4th International Suspension and Trailer Colloquium & Engineering Display), SAE International, Warrendale, PA, 2006, p. 101-112. 456. L.C.F. Canale, F.H. Bellan, and G.E. Totten, “Wear Resistance Evaluation of TiC Hardfacing to Sugar Cane Industry Applications”, in Proceedings of the 7th International Tooling Conference; Tooling Materials and Their Applications From Research to Market: Volume 1, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 677-684.. 457. C.K.N. Oliveira, G.E. Totten, A. Lombardi, and L.C. Casteletti, “Microabrasive Wear of Boride Layers on AISI D2 Tool Steel”, in Proceedings of the 7th International Tooling Conference, Tooling Materials and Their Applications From Research to Market: Volume 1, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 385-392. 458. A. Lombardi, C.K.N. Oliveira, G.E. Totten and L.C. Casteletti, “Wear Testing of Ion Nitrided Maraged Steel Blades”, in Proceedings of the 7th International Tooling Conference, Tooling Materials and Their Applications From Research to Market: Volume 2, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 181-187. 459. C.K.N. Oliveira, G.E. Totten, A. Lombardi, and L.C. Casteletti, “Wear of Thermoreactive Layers Produced on AISI H13 and D2 Tool Steels”, in Proceedings of the 7th International Tooling Conference, Tooling Materials and Their Applications From Research to Market: Volume 1, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 393-400. 460. B. Smoljan, D. Iljkic, G.E. Totten and I. Felde, “An Application of the JM® - Test in Computer Simulation of Quenching of Cold Work Tool Steels”, in Proceedings of the 7th International Tooling Conference, Tooling Materials and Their Applications From Research to Market: Volume 1, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 565-572.

38

461. J. Vatavuk, D. Domingues, and G.E. Totten, “Mechanical Properties of Powder Metallurgy and Conventional AISI M3 Class 2 High Speed Steels”, in Proceedings of the 7th International Tooling Conference, Tooling Materials and Their Applications From Research to Market: Volume 1, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 821-828. 462. G.E. Totten, N.I. Kobasko and L.C.F. Canale, “Intensive Quenching for Improved Hardness, Strength and Residual Stress Properties”, in Proceedings of the 7th International Tooling, Conference, Tooling Materials and Their Applications From Research to Market: Volume 1, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p.225-239. 463. A. Lombardi, C.K.N. Oliveira, G.E. Totten and L.C. Casteletti, “Wear Evaluation of Ion Nitrided Steels Used for Wood Machining Tools”, in Proceedings of the 7th International Tooling Conference, Tooling Materials and Their Applications From Research to Market: Volume 2, Politecnico Di Torino, Torino, Italy, May 2-5, 2006, p. 359-366. 464. M. Przylecka, W. Gestwa, and G.E. Totten, “Use of Aqueous Polymer Quenchants for Hardening Carbonitrided Parts”, Jinshu Rechuli, (Heat Treatment of Metals (China)), 2006, Vol. 31, No. 5, p. 85-88. 465. L.C.F. Canale, J. Gu and G.E. Totten, “Development and Use of the Larson-Miller Equation and Holloman-Jaffe Parameters for Stress Relieving Operations: A Review”, 61o Congresso Annual Da ABM/61st Annual Congress, July 24 to July 27, 2006 – Rio De Janeiro, Brazil, pp. 3513-3523. 466. L.C.F. Canale and G.E. Totten, “A Critical Overview of Quench Severity Quantification”, 61o Congresso Annual Da ABM/61st Annual Congress, July 24 to July 27, 2006 – Rio De Janeiro, Brazil, pp. 3550-3559. 467. N.I. Kobasko, L.C.F. Canale and G.E. Totten, “Intensive and Drastic Quenching: Equipment and Equipment Design”, 61o Congresso Annual Da ABM/61st Annual Congress, July 24 to July 27, 2006

– Rio De Janeiro, Brazil, pp. 3560-3570. 468. L.C.F. Canale, N.I. Kobasko and G.E. Totten, “Intensive Quenching: Heat Transfer and Residual Stress”, 61o Congresso Annual Da ABM/61st Annual Congress, July 24 to July 27, 2006 – Rio De Janeiro, Brazil, pp. 4297-4309. 469. G.S. Sarmiento, R.M.M. Riofano, L.C.F. Canale, R.A. Mesquita, and G.E. Totten, “Modeling Heat Transfer During Quenching Performance in Commercial Quench Tanks”, SAE Technical Paper Series, PaperNumber 2006-01-2810, Sao Paulo, Brazil, November, 2006. 470. L.C.F. Canale, A.C. Canale, C.E.Bates, and G.E. Totten, “Quench Factor Analysis To Quantify Steel Quench Severity And Its Successful Use In Steel Hardness Prediction”, SAE Technical Paper Series, Paper Number 2006-01-2814, Sao Paulo, Brazil, November, 2006.

471. L.C.F. Canale, Jianfeng Gu, Xin Yao, G.E. Totten, “History And Advances In Tempering Parameter Development”, SAE Technical Paper Series, Paper Number 2006-01-2807, Sao Paulo, Brazil, November, 2006. 472. C. A. Soufen, L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Production And Heat Treatment of Cast Graphitic Steels with Additions of Niobium”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 127-130. 473. E. A. B. Arnoni, Rafael Nucci, L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Production and Evaluation of AISI 420 Steel Coatings Obtained By Thermal-Spray Processes”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, Publ. 2007 by ASM International, Materials Park, OH, p. 124-128.

39

474. L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Niobium Precipitation Hardened Stainless Steels”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 468-471. 475. E. A. B. Arnoni, R. Nucci, A. Lombardi Neto, L. C. Casteletti. and G.E. Totten, “Micro Abrasive Wear Evaluation on WC Coatings With Different Binders Applied by HVOF Process”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, Publ. 2007 by ASM International, Materials Park, OH, p. 73-77. 476. A. M. de Oliveira, L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Ion Nitriding and Nitrocarburizing of Stainless Steels and Its Influence on Corrosion Resistance”,Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, Publ. 2007 by ASM International, Materials Park, OH, p. 118-123.

477. M. Martins, S. M. Rossitti, L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Effect of Stress Relief on the Impact Properties of Grade 1A (CD4MCu) and 1B (CD4MCuN) ASTM A 890/A890M Duplex Stainless Steels”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 451-456. 478. L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Development of Ultra-High Strength Steel Precipitation Hardened by Niobium”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 468-471. 479. M. L. Casotti, L. C. Casteletti, A. Lombardi Neto, and G. E. Totten, “Aluminizing Treatments in Steels and Cast Iron”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 480. G.E. Totten, L.C.F. Canale, A.C. Canale, C.E. Bates, “Quench Factor Analysis to Quantify Steel Quench Severity and Its Successful Use in Steel Hardness Prediction”, Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 384-389. 481. J. Vatavuk, L.C.F. Canale, G.E. Totten, S.G. Cardoso, “Effect of Nitriding on Toughness and Bending Resistance of Tool Steel”,Proceed. of the 15th IFHTSE Congress, Vienna, Austria, September 25-29, 2006, p. 545-550. 482. B. Smoljan, D. Iljkic, N. Tomasic, I. Felde, G.E. Totten and T. Reti, “Evaluation of Steel Hardenability by JIMÒTest”, Materials Science Forum, 2007, Vols. 537-538, p. 607-614. 483. G. S. Fox-Rabinovich and G.E. Totten, Eds., Self-Organization During Friction: Advanced Surface Engineered Materials and Systems Design, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL 484. D. Poteet. G.E. Totten and L.C.F. Canale, “Basic Principles of Quench System Design for Induction Hardening”, Jinshu Rechuli, 2006, No. 11, p. 88-93. 485. G.E. Totten, N. Gopinath and D. Pye, “Chapter 1 - Heat Treatment Equipment”, in Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Equipment and Process Design, Ed. By G.E. Totten, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL, p. 3-192. 486. H.M. Tensi, A. Stich and G.E. Totten, “Chapter 9 – Quenching and Quenching Technology”, in Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Metallurgy and Technologies, Ed. By G.E. Totten, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL, p. 539-606. 487. M. Narazaki and G.E. Totten, “Chapter 10 – Distortion of Heat Treated Components”, in Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Metallurgy and Technologies, Ed. By G.E. Totten, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL, p. 607-650.

40

488. Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Metallurgy and Technologies,Ed. By G.E. Totten, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL 489. Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Equipment and Process Design, Ed. By G.E. Totten, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL 490. L.C.F. Canale, R.N. Penha, G.E. Totten, A.C. Canale, and M.R. Gasparini, “Overview of Factors Contributing to Steel Spring Performance and Failure”, Int. J. Microstructure and Materials Properties, 2007, Vol. 2, Nos. 3/4, p. 262-309. 491. L.C.F. Canale, N.I. Kobaskoand G.E. Totten, “Intensive Quenching: Part 1 – What Is It?”, International Heat Treatment and Surface Engineering, 2007 , Vol. 1, No. 1, p. 30-33. 492. Gustavo Sánchez Sarmiento, Joaquín Fernández Bugna, Lauralice C.F. Canale, Rosamel M. Muñoz Riofano, Rafael Agnelli Mesquita, and George E. Totten, “Modeling Quenching Performance by the Kuyucak Method”, Materials Science & Engineering A, 2007, Vol. 459, p. 383-389. 493. J. Vatavuk, L.C.F.Canale, G. E. Totten, S. G. Cardoso, “Effect of Nitriding on Toughness and Bending Resistance of Tool Steels”, Int. J. of Microstructure and Materials Properties, 2006, Vol. 3, No. 4/5, p. 563 – 575. 494. L.C.F. Canale, N.I. Kobaskoand G.E. Totten, “Intensive Quenching: Part 2 – Formation of Optimal Surface Compressive Stresses”, International Heat Treatment and Surface Engineering, 2007, Vol. 1, No. 2, p. 60-63. 495.M. Martins, S. M. Rossitti, L. C. Casteletti, A. Lombardi Neto and G. E. Totten, “Stress Relief Heat Treatment in Duplex Stainless Steels” , Int. J. Materials and Product Technology, 2008, Vol. No. p. 496. R. Nucci, E.A.B. Armoni, A. Lombardi Neto, L.C. Casteletti and G.E. Totten, “Influence of HVOF Deposition Process Using Cr2C3 – NiCr and WC-CoCr Powders”, 2007 MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials, May 13-16, Denver, CO, Paper No. 2007- 01-0174, p. 8-74 – 8-81. 497. L.C. Casteletti, A. Lombardi Neto, D.T. de Macedo, L. de B. Cruvinel, and G.E. Totten, “Deposition of Stellite Superalloy Powder on 7475 Aluminum Alloy to Enhance its Wear and Corrosion Resistance”, 2007 MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials, May 13-16, Denver, CO, Paper No. 2007-01-0176, p. 8-129 – 8-139. 498. E.A.B. Arnoni, A. Lombardi Neto, L.C. Casteletti, and G.E. Totten, “Effect of HVOF Deposition Process in Powders of Tungsten Carbide with Different Binders”, 2007 MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials, May 13-16, Denver, CO, Paper No. 2007- 01-0172, p. 8-56 – 8-68. 499. L. C. F. Canale, E. Merheb, J. C. Vendramim, and G.E. Totten, “Energy Savings Using a Combination of Carburizing Cycle Reduction and Intensive Quenching”, Rechuli (Heat Treatment), 2007, Vol. 22, No. 2, p. 55-59. 500. Lauralice de Campos Franceschini Canale, George Edward Totten, and Antonio Canale, “Polimeros de Tempera a Base de PAG”, Pequisa e Tecnologia Revista Minerva, 2006, Vol. 3, No. 2, July- December, p. 209-214. (ISSN: 1808-6292). 501. D. T. De Macedo, L. De Brito Cruvinel,A. Lombardi Neto, G.E. Totten, L.C. Casteletti,“Thermal Spray Coatings On An Aged 7475 Aluminum Alloy Substrate”, in Proc. of 24th Heat Treating Society Conference, Eds. D.H. Herring, D.S. MacKenzie and D.J. Williams, 17-19 September, 2007, Detroit, MI, ASM International, Materials Park, OH, p.346-350.

41

502.L.C. Casteletti, R.M.M. Riofano, C.K.N. De Oliveira,A. Lombardi Neto, and G.E. Totten , “Plasma Nitriding of AISI H13 Tool Steel with Different Microstructures”, in Proc. of 24th Heat Treating Society Conference, Eds. D.H. Herring, D.S. MacKenzie and D.J. Williams, 17-19 September, 2007, Detroit, MI, ASM International, Materials Park, OH, p.338-342. 503. A. Itiman Filho, C.A.R. De Gouvea, A. Lombardi Neto, G.E. Totten, and L.C. Casteletti,“Three Point Bending Behavior of Orthodontic Thermo-Active Nitinol Wires”, in Proc. of 24th Heat Treating Society Conference, Eds. D.H. Herring, D.S. MacKenzie and D.J. Williams, 17-19 September, 2007, Detroit, MI, ASM International, Materials Park, OH, p. 343-345. 504. L. C. F. Canale, E. Merheb, J. C. Vendramim, G.E. Totten, N. Kobasko, M. A. Aronov, J. A. Powell, “Use of Intensive Quenching to Reduce the Carburizing Cycle of the Manufacture of Crosses for the Automotive Industry”, in Proc. of 24th Heat Treating Society Conference, Eds. D.H. Herring, D.S. MacKenzie and D.J. Williams, 17-19 September, 2007, Detroit, MI, ASM International, Materials Park, OH, p. 141-146. 505. L.C. Casteletti, A. Lombardi Neto, and G.E. Totten, “Electric Resistivity Evaluation of the Fe-31Mn- 7.5Al-1-5Si-1.0C Alloy”, in Proc. of 24th Heat Treating Society Conference, Eds. D.H. Herring, D.S. MacKenzie and D.J. Williams, 17-19 September, 2007, Detroit, MI, ASM International, Materials Park, OH, p.351-354. 506. M. Grenier, R. Gingras, and G.E. Totten, “Rapid Stress Relief and Tempering”, Heat Treating Progress, 2007, Vol. 7, No. 4, July, p. 36-40. 507. R. M. Muñoz Riofano, L. C. Casteletti, L. C.F. Canale and G. E. Totten, “Improved Wear Resistance of P/M Tool Steel Alloy With Different Vanadium Contents After Ion Nitriding”, Wear, 2007, Vol. 265, p. 57-64. 508. N.I. Kobasko, G.E. Totten, and L.C.F. Canale, “Intensive Quenching: Improved Hardness and Residual Stress”, Jinshu Rechuli (Heat Treatment of Metals - China), 2007,Vol. 32, No. 5, May, p. 84-89. 509. J. Vatavuk, L.C.F. Canale, S.G. Cardoso and G.E. Totten, “Toughness and Bending Resistance of Nitrided Tool Steels”, Rechuli (Heat Treatment), 2007, Vol. 22, No. 3, p. 10-16. 510. G.E. Totten, A.I. Filho, C.A.R. Gouvéa, A. Neto, L.C. Casteletti, “Development of Rolling Mill for Rectangular Orthodontic Wires Production”, Journal of Achievements in Materials and Manufacturing Engineering (JAMME) Extended Issue, 2007, Vol. 24, No. 1, September, p. 450-455. 511. Rafael Nucci, A. Lombardi Neto, E.A.B. Arnoni, G.E. Totten, L.C. Casteletti, “Influence of HVOF Process Using Cr3C2 –NiCr and WC-CoCr Powders”, Rechuli (Heat Treatment), 2007, Vol. 22, No. 4, p. 10-15. 512. Luiz C. Casteletti, A.L. Neto, G.E. Totten, D.T. de Macedo and L.B. Cruvinel, “Deposition of Stellite Superalloy Powder onto 7475 Aluminum Alloy to Enhance Wear Resistance”, Aluminum International Today, 2007, Vol. 19, No. 6, November/December, p. 29-31. 513. L.C. Casteletti, A. Lombardi Neto, and G.E. Totten, “HVOF Production of Hard Chromium Coatings for Improved Wear:, Industrial Heating, 2008, Vol. LXXV, No. 1, January, p. 53-58. 514. C.K.N. de Oliveira, G.E. Totten, A. Lombardi Neto and L.C. Casteletti, “Micro-Abrasive Wear of Boride Layers on AISI D2 Tool Steel Produced by a Thermoreactive Process”, Int. J. Microstructure and Materials Properties, 2008, Vol. 3, Nos. 2/3, p. 241-253. 515. G.E. Totten and R.J. Bishop Jr. “Quantitative Assessment of Air Content and Its Removal from Hydraulic Fluids: A Review“ in Proceed. of the 51st National Conference on Fluid Power, March 12-

42

14, 2008, Las Vegas Convention Center, Las Vegas, NV, National Fluid Power Association, Milwaukee, WI, NCFP I08-2.3, p. 47-60. 516. L.C. Casteletti, A. Lombardi Neto, and G.E. Totten, “Plasma Nitriding of Stainless Steels”, Industrial Heating, 2008, Vol. LXXV, No. 3, March, p. 61-66. 517. L. C. Casteletti, Rafael Nucci, A. Lombardi Neto, E. A. B. Arnoni and G. E. Totten, “Hard chromium substitution using HVOF coatings”, International Heat Treatment and Surface Engineering, 2008 , Vol. 2, No. 2, p. 27-31. 518. C.E. Canavides, J.E. Fernández Bugna, G. Sánchez Sarmiento, G.E. Totten, I. Feldeand T. Reti, “Thermo-Mechanical Analysis of Railway Wheels During Braking”, in Proceedings of 2nd International Conference on Distortion Engineering, Eds. H-W. Zoch and Th. Lübben, Bremen, Germany, 17-19 September 2008, Published by: Stiftung Institut für Werkstofftechnik, Bremen, Germany, p. 451-460. 519.F.A.P.Fernandes, A. Lombardi Neto, L.C. Casteletti, A.M. de Oliveira, G.E. Totten, “Stainless Steel Property Improvement by Ion Nitriding and Nitrocarburizing”. Heat Treating Progress, 2008, Vol. 8, No. 4, July/August, p. 41-43. 520. L.C.F. Canale and G.E. Totten, “Steel Heat Treatment Failures due to Quenching”, in Failure Analysis of Heat Treated Steel Components, Eds. L.C.F. Canale, R.A. Mesquita, and G.E. Totten, 2008, ASM International, Materials Park, OH, p. 255-284. 521. Małgorzata Przyłecka, Wojciech Gestwa, Lauralice C.F. Canale, Xin Yao, G.E. Totten, “Sources of Failures in Carburized and Carbonitrided Components”, in Failure Analysis of Heat Treated Steel Components, Eds. L.C.F. Canale, R.A. Mesquita, and G.E. Totten,2008, ASM International, Materials Park, OH, p. 177-240. 522. L.C.F. Canale, Xin Yao, Jianfeng Gu and George E. Totten, “A Historical Overview of Steel Tempering Parameters”, Int. J. Microstructure and Materials Properties, 2008, Vol. 3, Nos 4/5, p. 474- 525. 523. B. Hernández Morales, A. López Valdéz, H.J. Vergara Hernández, G. Sánchez Sarmiento, A. Gastón, G.E. Totten, “Experimental Determination of the Temperature Evolution within the Quenchant during Immersion Quenching”, Conf. Proceed. New Challenges in Heat Treating and Surface Engineering – Conference in Honor of Božidar Lišcić, June 9-12, 2009, Cavtat Croatia, Publ. by Croatian Society for Heat Treatment and Surface Engineering, Zagreb, Croatia, p. 31-36. 524. Ester Carvalho de Souza, Lauralice de C.F. Canale, George E. Totten, “Vegetable Oil Structure and Antioxidants”,Conf. Proceed. New Challenges in Heat Treating and Surface Engineering – Conference in Honor of Božidar Lišcić, June 9-12, 2009, Cavtat Croatia, Publ. by Croatian Society for Heat Treatment and Surface Engineering, Zagreb, Croatia, p. 45-52. 525. Daniel Komatsu, Elki C. Souza, Lauralice F.C. Canale, George E. Totten, “Effect of Corrosion Inhibitors on Cooling Curve Behavior of Soybean Oil-Based Quenchants”, Conf. Proceed. New Challenges in Heat Treating and Surface Engineering – Conference in Honor of Božidar Lišcić, June 9-12, 2009, Cavtat Croatia, Publ. by Croatian Society for Heat Treatment and Surface Engineering, Zagreb, Croatia, p. 37-44. 526. Patricia Mariane Kovalco, Lauralice C. F. Canale, George E. Totten, “Quenching Fundamentals – Quenching of Aluminum Alloys: Property Prediction by Quench Factor Analysis”, Heat Treating Progress, 2009, Vol. 9, No. 3, May/June, p. 23-28. 527. L.C. Casteletti, F.A.P. Fernandes, A. Lombardi-Neto, C.A. Picon, G. Tremiliosi, G.E. Totten, “Characterization 0f Plasma Nitrocarburized Layers Produced on AISI 316L Stainless Steel”,

43

Rechuli, 2009, Vol. 24, No. 3, p. 17-20. 528. Satyam S. Sahay, Goutam Mohapatra, George E. Totten, “Overview of Pearlitic Rail Steel: Accelerated Cooling,Quenching, Microstructure, and Mechanical Properties”, J. ASTM International, 2009, Vol. 6, No. 7, Paper Number JAI 102021.(see also: Lauralice de C.F. Canaler and Michihary Narazaki, Quenching and Cooling, Residual Stress and Distortion Control - STP 1523, 2010, ASTM International, 100 Barr Harbor Drive, W. Conshocken, PA 19428-2959 USA p. 692-727.)ISBN: 978-0—8031-7509-9 529.G. Sarmiento, C. Bronzini, A. Canale, L. Canale, G. Totten, “Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration on the Yield Strength of 7075-T6 Aluminum Plate”, J. ASTM International, 2009, Vol. 6, No. 1, Paper Number JAI 102098.(see also: Lauralice de C.F. Canaler and Michihary Narazaki, Quenching and Cooling, Residual Stress and Distortion Control - STP 1523, 2010, ASTM International, 100 Barr Harbor Drive, W. Conshocken, PA 19428-2959 USA p. 728-756.)ISBN: 978-0—8031-7509-9 530. Ester Carvalho de Souza,Mauro R. Fernandes, Sylvana C.M. Augustinho, Lauralice de Campos Franceschini Canale, George E. Totten, “Comparison of Structure and Quenching Performance of Vegetable Oils”, J. ASTM International, 2009, Vol. 6,No. 9, Paper Number JAI 102188.(see also: Lauralice de C.F. Canale and Michiharu Narazaki, Quenching and Cooling, Residual Stress and Distortion Control - STP 1523, 2010, ASTM International, 100 Barr Harbor Drive, W. Conshocken, PA 19428-2959 USA p. 531-570.)ISBN: 978-0—8031-7509-9 531. N. Kobasko, M. Aronov, J. Powell, G. Totten, “One More Discussion: What Is The Intensive Quenching Process?” J. ASTM International, 2009, Vol. 6, No. 1, Paper Number JAI 101792. (see also: Lauralice de C.F. Canaler and Michihary Narazaki, Quenching and Cooling, Residual Stress and Distortion Control - STP 1523, 2010, ASTM International, 100 Barr Harbor Drive, W. Conshocken, PA 19428-2959 USA p. 629-643.)ISBN: 978-0—8031-7509-9 532. L. Canale, X. Luo, X. Yao, G. Totten, “Quenchant Characterization by Cooling Curve Analysis”, J. ASTM International, 2009, Vol. 6, No. 2, Paper Number JAI 101981.(see also: Lauralice de C.F. Canaler and Michihary Narazaki, Quenching and Cooling, Residual Stress and Distortion Control - STP 1523, 2010, ASTM International, 100 Barr Harbor Drive, W. Conshocken, PA 19428-2959 USA p. 861-899.)ISBN: 978-0—8031-7509-9 533 F.A.P. Fernandes, G.T.M. Alencar, G.T.M., C.A. Picon, G.E. Totten, A. Lombardi-Neto,L.C. Casteletti, “Wear and Corrosion Resistance of Self-Fluxing Coatings with the Addition of Hard Particles”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 60-63。 534. L.C. Casteletti, F.A.P. Fernandes, A. Lombardi-Neto, C.A. Picon, G.E. Totten, “Wear and Corrosion Resistance of Precipitation Hardening Stainless Steels with Niobium”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 80-83。 535. F.A.P. Fernandes, S.C. Heck, C.A. Picon, G.E. Totten, L.C. Casteletti, “Wear and Corrosion Evaluation of Pack Chromized AISI 1060 Steel”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 350-363。 536. F.A.P. Fernandes, S.C. Heck, C.A. Picon, G.E. Totten, L.C. Casteletti, “Wear and Corrosion Evaluation of Pack Boronized AISI 1060 Steel”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 368-372。

44

537. L.C. Casteletti, S.C. Heck, F.A.P. Fernandes, G.E. Totten G.E., A. Lombardi-Neto, C.A. Picon, “Salt Bath Boronizing of a Fe-Mn-Al System Alloy: Wear and Corrosion Evaluation”,Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 326-329。 538. S.C. Heck, F.A.P. Fernandes, G.E. Totten, S.G. Schneider, R.G. Pereira, L.C. Casteletti, “Wear Behavior of Borided Ti-13Nb-13Zr Alloy”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 90-92。 539. S.C. Heck, F.A.P. Fernandes, G.E. Totten, A.Lombardi- Neto, L.C. Casteletti, “Boronizing of Maraging Steel (C-250 grade): Evaluation of Wear Behavior”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 373-376。 540. George E. Totten, Ester Carvalho de Souza, William Capelupi, Lauralice de Campos Franceschini Canale, “Chemistry of Quenching: Vegetable Oil Based Quenchants – A Closer Look”, Conf. Proceed. The 4th Asian Conference on Heat Treatment and Surface Engineering, October 27-30, 2009, Beijing, China, Chinese Heat Treatment Society, Beijing China, p. 5-11。 541. L.C. Casteletti, F.A.P. Fernandes, S.C. Heck, C.K.N. de Oliveira, A. Lombardi-Neto, G.E. Totten, “Pack and Salt Bath Diffusion Treatments on Steels”, Heat Treating Progress, 2009, Vol. 9, No. 5, September, p. 49-52. 542. L.C. Casteletti, A. Lombardi Neto, A.M. de Oliveira, G.E. Totten, “Ion nitriding and nitrocarburising of stainless steels and its influence in the corrosion resistance”, Int. J. Microstructure and Materials Properties, 2009, Vol. 4 , No. 4, p. 399-411. 543.Patricia Mariane Kovalco, Lauralice C. F. Canale, George E. Totten, “Quenching Fundamentals – Quenching of Aluminum Alloys: Cooling Rate, Strength and Intergranular Corrosion”, Heat Treating Progress, 2009, Vol. 9, No. 6, November/December, p. 25-30. 544.B. Liščić, H.M. Tensi, L.C.F. Canale and G.E. Totten, Theory and Technology of Quenching: A Handbook, 2nd Edition, 2009, CRC Press, Boca Raton, FL. 545. L. de C.F. Canale and G.E. Totten, “Chapter 1 - Hardening of Steel”, in B. Liščić, H.M. Tensi, L.C.F. Canale andG.E. Totten Eds. ,Theory and Technology of Quenching: AHandbook, 2nd Edition, 2009, CRC Press, Boca Raton, FL, p. 546.L. Meekisho, X. Yao, and G.E. Totten, “Chapter 3 - Quenching of Titanium Alloys”, in B. Liščić, H.M. Tensi,L.C.F. Canale andG.E. Totten Eds. ,Theory and Technology of Quenching: A Handbook, 2nd Edition, 2009, CRC Press, Boca Raton, FL, p.85-104. 547. G. Belinato, L. de C.F. Canale and G.E. Totten, “Chapter 13 – Gas Quenching”, in B. Liščić, H.M. Tensi, L.C.F. Canale andG.E. Totten Eds. ,Theory and Technology of Quenching: AHandbook, 2nd Edition, 2009, CRC Press, Boca Raton, FL, p. 445-484. 548. L.C. Casteletti, F.A.P, Fernandes, A. Lombardi-Neto, C.A. Picone, G.E. Totten, Corrosion Resistance Evaluation of Precipitation Hardening Stainless Steel with Niobium”, Rechuli, 2009, Vol. 24, No. 4, p. 25-28. 548. Ester Carvalho de Souza, Daniel Komatsu, Gabreila Belinato, George E. Totten, Lauralice de C.F. Canale ,“Vegetable Oil Structure and Antioxidants”,Transactionsof FAMENA (Faculty of Mechanical Engineering and Naval Archetecture of the University of Zagreb), 2010, Vol.34 , No. 3 .

45

p. 71-82, ISSN: 1333-1124. 549. Daniel Komatsu, Elki C. Souza, E. Carvalho de Souza, Lauralice F.C. Canale, George E. Totten, “ Effect of Antioxidants and Corrosion Inhibitor Additives on the Quenching Performance of Soybean Oil”, Strojniški vestnik (Journal of Mechanical Engineering – Slovenia), 2010, Vol. 56. No. 2, p. 121- 130. 550. N.I. Kobasko, E. Carvalho de Souza, L.C.F. Canale, GE. Totten, Vegetable Oil Quenchants: Calculation and Comparison of the Cooling Properties of a Series of Vegetable Oils, Strojniški vestnik (Journal of Mechanical Engineering – Slovenia), 2010, Vol. 56, No. 2, p. 131-142. 551. L. C. Casteletti,A. Lombardi Neto,G. E. Totten,S. C. Heck,and F. A. P. Fernandes “Use of Fe– 31Mn–7.5Al–1.3Si–0.9C Alloy for Fabrication of Resistive Elements”, J.ASTM International, 2010, Vol. 7, No. 2, Paper Number JAI 102605. 552. Luiz Carlos Casteletti, Eduardo Augusto Brefere Arnoni, Frederico Augusto Peres Fernandes, Amadeo Lombardi Neto, George Edward Totten, “Effect of the HVOF Deposition Process in the Chemical Composition of Tungsten Carbide Layers with Cobalt or Nickel Binders”, Journal of ASTM International, 2010, Vol. 7, No. 3, Paper ID JAI102606 553. B. Smoljan, S. Smokvina Hanza, D. Iljkić, G.E. Totten, I. Felde, “Computer Simulations of Mechanical Properties of Steel Dies”, Materials and Manufacturing Processes,2009, Vol. 24, p. 714- 717. 554. G.E. Totten, J. Gu, and J.S. Pan, “Process Modeling for Heat Treatment: Current Status and Future Developments”, in Proceedings 4th International Conference on Thermal Process Modeling and Computer Simulation”, 31 May – 2 June, 2010, Shanghai, China, Paper ID. No. A01. 555. Charles C. Conconi, Lauralice C. Franceschini Canale, George E. Totten, “Determination of oxidation stability of biodiesel B100 with optical spectroscopies of eletronic absorption UV-Visible correlation with Rancimat method DIN EN 14112”, SAE Technical Paper Series, Paper Number 2010-36-144I, Sao Paulo, Brazil, November, 2010. 556. F.A.P. Fernandes, S.C. Heck, R.G. Pereira, A. Lombardi-Neto, G.E. Totten, L.C. Casteletti, “Wear of Plasma Nitrided and Nitrocarburized AISI 316L Austenitic Stainless Steel”, Journal of Achievements in Materials and Manufacturing Engineering (JAMME), 2010, Vol. 40, No. 2, June, p. 175-179. 557. L.C. Casteletti, E.A.B. Arnoni, A. Lombardi-Neto, F.A.P. Fernandes, G.E. Totten, “Effect of Binders and Surface Finish on Wear Resistance of HVOF Coatings”, Surface Engineering, 2010, Vol. 26, No. 6., p. 440-446. 558. E. Carvalho de Souza, C. Bronzini, A. Gaston, G. Sanchez Sarmiento, L.C.F. Canale, G.E. Totten, “Heat Transfer Coefficient Characterization of Vegetable Oils”, 65th ABM International Congress/18th IFHTSE Congress, Rio De Janeiro, Brazil, July 26-30, 2010, p. 4740-4749. 559. Gustavo Sanchez Sarmiento, Rosamel Melita Munoz Riofano, Lauralice Campos Franceschini Canale, George Edward Totten, Analia Gaston, “Modeling Steel Transformation Behavior From Cooling Behavior By The Kuyucak Method”, 65th ABM International Congress/18th IFHTSE Congress, Rio De Janeiro, Brazil, July 26-30, 2010, p. 5314-5327. 560. Luiz Carlos Casteletti, Frederico Augusto Pires Fernandes, Stenio Cristaldo Heck, Carlos Alberto Picon, George Edward Totten, “Effect of Plasma Nitriding on the Wear and Corrosion Properties Of HASTELLOY CW2MSuper-Alloy”, 65th ABM International Congress/18th IFHTSE Congress, Rio De Janeiro, Brazil, July 26-30, 2010, p. 5080-5087. 561. Stenio Cristaldo Heck, Frederico Augusto Pires Fernandes, Ricardo Gomes Pereira, George Edward

46

Totten, Luiz Carlos Casteletti, “Influence of the Ion Nitriding Temperature in the Wear Resistance of AISI H13 Tool Steel”, 65th ABM International Congress/18th IFHTSE Congress, Rio De Janeiro, Brazil, July 26-30, 2010, p. 5125-5130. 562. Frederico Augusto Pires Fernandes, Stenio Cristaldo Heck, George E. Totten, C.A.Picon, Luiz Carlos Casteletti, “Effect of the Strain-Hardening on the Wear and Corrosion Behaviour of a Fe-Mn- Al Alloy”,Conf. Proceed. of 15th International Metallurgy and Materials Congress (IMMC 2010), November 11-13, 2010, TÜYAP Fair, Convention and Conference Center, Instanbul, Turkey, Organized by UCTEA Chamber of Metallurgical Engineers, Hatay Sokak No: 10/9, Kızılay 06650, ANKARA – TURKEY, p. 883-888. 563. George E. Totten, “Heat Treatment: State-Of-The Art, Future Trends”, Conf. Proceed. of 15th International Metallurgy and Materials Congress (IMMC 2010), November 11-13, 2010, TÜYAP Fair, Convention and Conference Center, Instanbul, Turkey, Organized by UCTEA Chamber of Metallurgical Engineers, Hatay Sokak No: 10/9, Kızılay 06650, ANKARA – TURKEY, p. 1593-1615. 564. Stenio Cristaldo Heck, Frederico Augusto Pires Fernandes, George E. Totten, Luiz Carlos Casteletti, “Oxidation Kinetics of Pack Borided AISI 1060 and H13 Steels”Conf. Proceed. of 15th International Metallurgy and Materials Congress (IMMC 2010), November 11-13, 2010, TÜYAP Fair, Convention and Conference Center, Instanbul, Turkey, Organized by UCTEA Chamber of Metallurgical Engineers, Hatay Sokak No: 10/9, Kızılay 06650, ANKARA – TURKEY, p. 1746-1751 565. Ester Carvalho de Souza, Carlos Alberto Bronzini, Analia Gaston3, Lauralice de Campos Franceschini Canale, Gustavo Sanchez Sarmiento, George E. Totten, ”Temperature Dependence of the Quenching Properties of Vegetable Oils Compared to Petroleum Oil Quenchants”,Conf. Proceed. of 15th International Metallurgy and Materials Congress (IMMC 2010), November 11-13, 2010, TÜYAP Fair, Convention and Conference Center, Instanbul, Turkey, Organized by UCTEA Chamber of Metallurgical Engineers, Hatay Sokak No: 10/9, Kızılay 06650, ANKARA – TURKEY, p. 1694-1787 566. Gabriela Belinato, Lauralice de Campos Franceschini Canale, George E. Totten, “Vegetable Oil Based Quenchants: Effect of Antioxidants on Oxidative Stability and Initial Quenching Performance of Soybean Oil and Palm Oil”,Conf. Proceed. of 15th International Metallurgy and Materials Congress (IMMC 2010), November 11-13, 2010, TÜYAP Fair, Convention and Conference Center, Instanbul, Turkey, Organized by UCTEA Chamber of Metallurgical Engineers, Hatay Sokak No: 10/9, Kızılay 06650, ANKARA – TURKEY, p. 1708-1715. 567. N.I. Kobasko, M.A. Aronov, J.A. Powell, G.E. Totten, Intensive Quenching Systems: Engineering and Design , 2010, ASTM International, West Conshohocken, PA. ISBN: 978-0-8031-7019-3 568. N.I. Kobasko and G.E. Totten, “Chapter 11 - Design of Industrial Quenching Systems”, inIntensive Quenching Systems: Engineering and Design, Eds. N.I. Kobasko, M.A. Aronov, J.A. Powell, G.E. Totten, 2010, ASTM International, West Conshohocken, PA, p. 170-184. 569. B. Hernández Morales, A. Lopez Valdez, H.J. Vergara Hernández, G. Sanchez Sarmiento, A. Gastón, G.E. Totten, “Experimental Determination of the Temperature Evolution Within the Quenchant DuringImmersion Quenching”, Int. J. of Microstructure and Materials Properties, 2011, Vol. 6, No. 6, p. 444-454. 570. E.C.A. Simencio, L.C.F. Canale, G.E. Totten, “Uphill Quenching of Aluminum: A Process Overview”, International Heat Treatment and Surface Engineering, 2011, Vol.5, No. 1, p. 26-30.

571. A.R. Mattar, R.C. Heck, A.L. Neto, F.A.P. Fernandes, G.E. Totten and L.C. Casteletti, “Influence of Alloying Elements Cu, Ni, and Mo on Mechanical Properties and Austemperability of Austempered Ductile Iron”,International Heat Treatment and Surface Engineering, 2011, Vol. 5, No. 2, p. 78-82.

47

572. Patricia Mariane Kavalco, Lauralice C.F. Canale, George E. Totten, “Distortion Reduction by Aqueous Polymer Quenching of Aluminum Alloys”, Industrial Heating, 2011, Vol. LXXIX, No. 2, February, p. 39-42.

573. Bernardo Hernández-Morales, Héctor J. Vergara-Hernández, Gildardo Solorio-Díaz and George Totten, “Chapter 3 – Experimental and Computational Study of Heat Transfer During Quenching of Metallic Probes”, in Evaporatation, Condensation and Heat Transfer, Ed. Amimul Ahsan, InTech, Janeza, Trdine 9, 51000, Rijeka, Croatia, p. 49-72. ISBN: 978-953-307-583-9.

574. E. Carvalho de Souza, C. Bronzini, A. Gastón, G. Sanchez Sarmiento, G.E. Totten, L.C.F. Canale “ÓLEOS VEGETAIS COMO MEIO DE TÊMPERA PARA METAIS”, in CIBEM 10 – X Congreso Iberoamericano de Ingenieria Mecánica,Oporto, Portugal, Eds. RM Natal Jorge, JMRS Tavares, JL Alexandre, AJM Ferreira, MAP Vaz, September 4-7, 2011, p. 1793-1802. 575. G. Sanchez Sarmiento, A. Gaston, G. Totten, “Computational Modelling of Heat Treating Processes By Use of HT-Mod and Abaqus”, Latin American Applied Research – An International Journal, 2011, Vol. 41, No. 3, July, p. . ISSN: 0327-0793 http://www.laar.uns.edu.ar/accepted_papers.htm 576. X. Luo and G.E. Totten, “Analysis and Prevention of Quenching Failures and Proper Selection of Quenching Media: An Overview”, Journal of ASTM International, 2011, Vol. 8, No. 4, Paper ID JAI103397. 577.Gabriela Belinato, Lauralice C.F. Canale, George E. Totten, “Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Based Quenchants”, Rechuli (Heat Treatment), 2011, Vol. 26, No. 3, p. 9-15. 578. Gabriela Belinato, Lauralice C.F. Canale, George E. Totten, “Effect of Antioxidants on Oxidative Stability and Quenching Performance of Soybean Oil and Palm Oil Based Quenchants”, Journal of ASTM International, 2011, Vol. 8, No. 9, Paper ID JAI103376. 579. Ester Carvalho de Souza, Gabriela Belinato, Rosa L. Simencio Otero, Éder Cícero Adão Simêncio, Sylvana C.M. Augustinho, William Capelupi, Charles Conconi, Lauralice C.F. Canale, George E. Totten, “Thermal Oxidative Stability of Vegetable Oils as Metal Quenchants”, Journal ofASTM International, 2011, Vol.9, No. 1, Paper ID JAI 103817. 580. Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Use of Vegetable Oils and Animal Oils as Steel Quenchants : A Historical Review – 1850-2010”, Journal ofASTMInternational, 2011, Vol. 9, No.1 , Paper ID JAI 103534 581. Luiz Carlos Casteletti, Frederico Augusto Pires Fernandes, Stenio Cristaldo Heck, Carlos Alberto Picon, George Edward Totten, “Effect of Plasma Nitriding on the Wear and Corrosion Properties of HASTELLOY CW2M Super-Alloy”, Journal ofASTMInternational, 2011, Vol. 8 , No.7 , Paper ID JAI 103253. 582.Diego Said, Gabriela Belinato, Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, Gustavo S. Sarmiento, Analía Gastón, “Effect of the Oxidation Stability of Soybean Oil and Palm Oil

on Steel Quenching Performance”, in Heat Treating – Proceedings of the 26th Conference, Eds. B.L. Ferguson, R. Jones, D.S. MacKenzie, and D. Weires, October 31 – November 2, 2011, Cincinnati,

OH, USA, ASM International, Materials Park, OH, p. 258-265. 583. Ester Carvalho de Sousa, Lauralice C.F. Canale, G. Sánchez Sarmiento, Eliana Agaliotis, Juan C.

Carrara, Diego S. Schicchi, George E. Totten, “Heat Transfer Properties of A Series of Oxidized and Unoxidized Vegetable Oils in Comparison with Petroleum Oil-Based Quenchants”, in Heat Treating – Proceedings of the 26th Conference, Eds. B.L. Ferguson, R. Jones, D.S. MacKenzie, and D. Weires,

48

October 31 – November 2, 2011, Cincinnati, OH, USA, ASM International, Materials Park, OH, p. 235-243.

584. Rosa L. Simencio Otero, Lauralice C.F. Canale, Diego Said Schicchi, Eliana Agaliotis, George E. Totten, Gustavo Sánchez Sarmiento, “Epoxidized Soybean Oil: Evaluation of Oxidative Stabilization

and Metal Quenching/Heat Transfer Performance”, in Heat Treating – Proceedings of the 26th Conference, Eds. , October 31 – November 2, 2011, Eds. B.L. Ferguson, R. Jones, D.S. MacKenzie, and D. Weires, Cincinnati, OH, USA, ASM International, Materials Park, OH, p. 266-276. .

585. Fernando B. Martins, Marcelo Martins, George E. Toten, Frederico A.P. Fernandes, Luiz C. Casteletti, “Microstructural Characterization and Creep Properties of Cast Nb, Zr-Modified HP Steels”, in Heat Treating – Proceedings of the 26th Conference, Eds. , October 31 – November 2, 2011, Eds. B.L. Ferguson, R. Jones, D.S. MacKenzie, and D. Weires, Cincinnati, OH, USA, ASM International, Materials Park, OH, p. 50-54. 586. Lauralice C.F. Canale, Ester Carvalho de Sousa, George E. Totten, “Quenchants Derived fromVegetable Oils as Alternatives to Petroleum Oil”, Industrial Heating, 2011, Vol. LXXIX, No. 9, September, p. 45-48. (Internet Edition – long version of the paper with full references: http://www.industrialheating.com/Articles/Feature_Article/BNP_GUID_9-5-2006_A_10000000000001097301)

587. George E. Totten, Luiz C. Casteletti, Frederico A.P. Fernandes, Juno Gallego, “Microstructural Characterization of Layers Produced by Plasma Nitriding of Austenitic and Superaustenitic Stainless Steel Grades”, Journal of ASTM International, 2011, Vol.9, No. 2, Paper ID JAI 103564. 588. Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Epoxidized Soybean Oils: Evaluation of Oxidative Stabilization and Metal Quenching/Heat Transfer Performance”, COBEM 2011, 21st Brazilian Congress of Mechanical Engineering – October 24-28, 2011, Natal, RN, Brazil, Paper ID – COB 14851, p. 266-276. 589. Lauralice C.F. Franceschini Canale, Adriana Marques, Ayrton Antonio Batista Junior, George E. Totten, “Comparison of the Interfacial Heat Transfer Mechanisms and Rewetting Properties of Vegetable Oil and Petroleum Oil – Based Quenchants and Potential Impact on Quench Distortion”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland. 590. Ester Carvalho de Souza, Luiz Fernando de OliveiraFriedel, George E. Totten, Lauralice de Campos Franceschini Canale, “Comparison of the Quenching and Heat Transfer Properties of an Expanded Series of Vegetable Oils”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-28. 591. Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Evaluation of Epoxidized Soybean Oil/FAME Blends as Metal Quenchants: Part I – Comparison of Heat Transfer Performance”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-29. 592. George E. Totten and Luigo L.M. Albano, “Quenchants: Current Status and Future Developments”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Plenary Paper. 593. L.P. Lira, G.E. Totten, F.R.C. Sirbone, A. Lombardi Neto, L.C. Casteletti, “Evaluation of Wear Resistance of Peek-Based Coating”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-35. 594. L.P. Lira, G.E. Totten, A. Itman Filho, A. Lombardi Neto, L.C. Casteletti, “Influence of Thermal Spray on the 7475 Aluminum Alloy”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-34.

49

595. Frederico Augusto Pires Fernandes, LuizCarlos Casteletti, George Edward Totten, Juno Gallego, “Decomposition of Expanded Austenite in AISI 316L Stainless Steel Nitrided at 450 ºC”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-8. 596. F.A.P. Fernandes, J. Gallego, G.E. Totten, C.A. Picon, L.C. Casteletti, “Corrosion Resistance of Plasma Nitrided and Nitrocarburized AISI 316L Austenitic Stainless Steel”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-7. 597. F.A.P. Fernandes, G.E. Totten, J. Gallego, L.C. Casteletti, “Plasma Nitriding and Nitrocarburizing of a Supermartensitic Stainless Steel”, IFHTSE 19th Congress, 17-20 October 2011, The Grand Central Hotel, Glasgow, Scotland, Paper No. P-3. 598. G.E. Totten and. V. De Negri, Handbook of Hydraulic Fluid Technology, 2nd Edition, 2011, CRC Press, Boca Raton, FL. ISBN:978-1-4200-8526-6. 599. Toshi Kazama and George E. Totten, “Chapter 3 - Physical Properties and Their Determination”, in Handbook of Hydraulic Fluid Technology, 2nd Edition, Eds. G.E. Totten and. V. De Negri, 2011, CRC Press, Boca Raton, FL. p. 103-180.ISBN:978-1-4200-8526-6. 600. Ester Carvalho de Souza, Éder Cícero Adão Simêncio, Rosa Lúcia Simencio Otero,Sylvana Cardoso Miguel Agustinho, Lauralice de Campos Franceschini Canale, George Edward Totten, “Use of NMR H1 for Physico-Chemical Properties of Vegetable Oils”, Proceedings of COBEM 2011, 21st Brazilian Congress of Mechanical Engineering, October 24-28, 2011, Natal, RN, Brazil, Paper ID No. ID: 091701. Portuguese version: “CARACTERIZAÇÃO DAS PROPRIEDADES FÍSICO-QUÍMICAS DOS ÓLEOS VEGETAIS UTILIZANDO RMN DE H1” Proceedings of 200 CBECIMAT Brasileiro de Engenharia e Ciência dos Materiais, 04 a 08 de Novembro de 2012, Joinville, SC, Brasil, p. 8390 – 8401. 601. S.C. Heck, F.A.P. Fernandes, G.E. Totten, A. Lombardi Neto, L.C. Casteletti, “Boronizing of Maraging Steel (C-250 Grade): Evaluation of Wear Behavior”, Rechuli (Heat Treatment), 2012, Vol. 27, No. 1, p. 23-26. 602. G.E. Totten and L.L.M. Albano, “IFHTSE Global 21: Heat treatment and surface engineering in the 21st century Part 18: Quenching: current status and future developments”, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.1, p.4-14. 603. F.A.P. Fernandes, G.E. Totten, J. Gallego, L.C. Casteletti, “Plasma Nitriding and Nitrocarburising of a Supermartensitic Stainless Steel” , International Heat Treatment and Surface Engineering, 2012, Vol.6, No.1, p. 24-27. 604. F.A.P. Fernandes, S.C. Heck, G.E. Totten, C.A. Picon, L.C. Casteletti, “Effect of Strain hardening on the wear and corrosion behavior of a Fe-Mn-Al-C alloy”, Int. J. Microstructure and Materials Properties, 2012, Vol. 7, Nos. 2/3, p. 143-151. 605. Ester C. Sousa, Diego S. Schicchi, Analia Gaston, Gustavo S. Sarmiento, George E. Totten, Lauralice C.F. Canale, “Residual Stresses and Heat Transfer Properties of a Series of Oxidized and Unoxidized Vegetable Oils in Comparison with Petroleum Oil-Based Quenchants”, 15th International Conference on Experimental Mechanics (ICEM-15), Faculty of Engineering, University of Porto, Porto, Portugal, July 22-27, 2012, Paper No. 3015. 606. F.A.P. Fernandes, S.C. Heck, C.A. Picon, G.E. Totten and L.C. Casteletti, “Wear and Corrosion Resistance of Pack Chromised Carbon Steel”, Surface Engineering, 2012, Vol. 28, No. 5, p. 313-317. 607. Patricia Mariane Kavalco, Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Redução da Distorcão de Ligas de Aluminio por Meio de Tempera em Solução Aquosa de

50

Polimero”, Industrial Heating (Brazil), 2012, June, p. 54-58. 608. F.A.P. Fernandes, L.C. Casteletti, G.E. Totten and J. Gallego, “Decomposition of Expanded Austenite in AISI 316L Stainless Steel Nitrided at 723K”, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.3, p. 103-106 . 609. I. Felde, G.E. Totten, “Estimation of Heat Transfer Coefficient Obtained During Immersion Quenching”, in Conf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials OH, 2012, p.447-456. ISBN: 9781615039807 610. D.S. Schicchi, G. Belinato, G.S. Sarmiento, A. Gastón, G.E. Totten, L.C.F. Canale, “Effect of Soybean Oil and Palm Oil Oxidation Stability on the Variation of Heat Transfer Coefficients and Residual Stress”, in Conf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials OH, 2012, p. 621-633. ISBN: 9781615039807 611. D.S. Schicchi, E.C. de Souza,A. Gastón, G.S. Sarmiento, G.E. Totten, L.C.F. Canale, “Effect of Vegetable Oil Oxidation on Heat Transfer and Residual Stress during Quenching”, in Conf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials, OH, 2012, p. 547-552. ISBN: 9781615039807 612. D.E. Lozano, R.D. Mercado-Solís, R.Colás, L.F. Canale, G.E. Totten, “Surface Temperature and Heat Transfer Coefficient Determination during Quenching for Martensite Fraction Prediction Using a Parabolic Heat Transfer Model”, in Conf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials, OH, 2012, p. 746-754. ISBN: 9781615039807 613. T. Giordani, T.R. Clarke, C.E.F. Kwietniewski, M.A. Aronov, N.I. Kobasko, G.E. Totten, “Preliminary Evaluation of Fatigue in Carburized, Conventionally and Intensively Quenched Steels”, inConf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials, OH, 2012, p. 266- 280. ISBN: 9781615039807 614. G.M. Martinez-Cázares, D.E. Lozano, M.P. Guerrero-Mata, R. Colás, L.C. Canale, G.E. Totten, “Modelling of Temperature Distribution of a Square Bar During Spray Quenching and Square Edge Cooling Effect”, in Conf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials, OH, 2012, p. 502-509. ISBN: 9781615039807 615. D.E. Lozano, R.D. Mercado-Solís, R.Colás, L.F. Canale, G.E. Totten, “Heat Transfer Coefficients During Quenching of Inconel and AISI 304 Stainless Steel Cylinders in NaNO2 Aqueous Solutions”, inConf. Proceed. 6th International Conference on Quenching and Control of Distortion, Ed. D.S. MacKenzie, September 9-13, 2012, Chicago, IL, ASM International, Materials, OH, 2012, p. 341- 348. ISBN: 9781615039807 616. X. Luo, K. Chen, G.E. Totten, “Fast Primary Cooling: Alternative to Lead Baths for High-Carbon Steel Wire Patenting”, Materials Performance and Characterization, 2012, Vol. 1, No.1 , Paper ID MPC 20120006. 617. L.L.M. Albano, P.M. Kavalco, G.E. Totten, L.C.M. Canale, “IFHTSE Global 21: Heat Treatment and Surface Engineering in the 21st Century – Part 19: Type I Quenchants for Quenching of Aluminum: A Review”, International Heat Treatment and Surface Engineering, 2012, Vol.6, No.4 , p. 146-152. 618. Diego S. Schicchi, Rosa L. Simencio Otero, Gustavo Sánchez Sarmiento, George E. Totten, Lauralice

51

C.F. Canale, “ Epoxidized Soybean Oil/FAME Blends as Metal Quenchants: Part II – Quenching and Residual Stress Performance”, 20th Congress for Heat Treatment and Surface Engineering, Eds. Gao Zhi and Han Chong, Chinese Heat Treatment Society (CHTS), 23-25 October 2012, Beijing, China, p. 392-396. 619. R.S. Otero, A.F. Farah, O.R. Crnkovic, G.E. Totten, L.C.F. Canale, “Castor Oil: Studies for Heat Treatment Applications”, 20th Congress for Heat Treatment and Surface Engineering,Eds. Gao Zhi and Han Chong, Chinese Heat Treatment Society (CHTS), 23-25 October 2012, Beijing, China, p. 428-432. 620. Antônio C. Canale, Luigi L.M. Albano, George E. Totten, Lauralice C.F. Canale, “Quench Factor Characterization of Quenchants”, 20th Congress for Heat Treatment and Surface Engineering, Eds. Gao Zhi and Han Chong, Chinese Heat Treatment Society (CHTS), 23-25 October 2012, Beijing, China, p. 423-427. 621. Ayrton Antonio Batista Junior, Adriana Marques, George E. Totten, Lauralice C. Franceschini Canale, “Cooling Curve and Rewetting Properties of Vegetable Oil – Based Quenchants: Comparison of a Series of Vegetable Oils”, 20th Congress for Heat Treatment and Surface Engineering, Eds. Gao Zhi and Han Chong,Chinese Heat Treatment Society (CHTS), 23-25 October 2012, Beijing, China, p. 444-448. 622. Ester Carvalho de Souza, George E. Totten, Lauralice de Campos Franceschini Canale, “Effect of Bath Temperature on the Quenching Performance of Vegetable Oils”, 20th Congress for Heat Treatment and Surface Engineering,Eds. Gao Zhi and Han Chong, Chinese Heat Treatment Society (CHTS), 23-25 October 2012, Beijing,China, p. 449-452. 623. R.L. Simencio Otero, D.S. Schicchi, R.N. Penha, G.S. Sarmiento, L.C.F. Canale, G.E. Totten, “Utilizaćão do Óleo de Soja Epoxidado e Blendas Com Éster Metilíco de Óleo de Soja Como de Fluidos de Têmpera: Parte II – Têmpera e Tensões Residuais”, Proceedings of 200 CBECIMAT Brasileiro de Engenharia e Ciência dos Materiais, 04 a 08 de Novembro de 2012, Joinville, SC, Brasil, p. 7419 – 7426. 624. E.C. de Souza, S.C.M. Augustinho, G.E. Totten, L.C.F. Canale, “Caracterização das Físico-Químicas dos Óleos Vegetais Utilizando RMN de H1”, Proceedings of 200 CBECIMAT Brasileiro de Engenharia e Ciência dos Materiais, 04 a 08 de Novembro de 2012, Joinville, SC, Brasil, p. 8390 – 8401. 625.S. Tung and G.E. Totten, Handbook of Automotive Lubrication and Testing, 2012, ASTM International, West Conshohocken, PA . 495 pp., ISBN: 978-0-8031-7036-0 626. Ester Carvalho de Souza, Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Fluidos de Tȇmpera Derivados de Óleos Vegetais como Alternativa aos Óleos Minerais”, Industrial Heating (Brazil), 2012, December, p. 55-59. 627. Ester Carvalho de Souza, Luiz Fernando de Oliveira Friedel, George E. Totten, Lauralice de Campos Franceschini Canale, “Quenching and Heat Transfer Properties of Aged and Unaged Vegetable Oils”, Journal of Petroleum Science Research (JPSR), 2012, Vol. 2 , No.1 , p. 41-47. 628.Ester Carvalho de Sousa, Lauralice C.F. Canale, G. Sánchez Sarmiento, Eliana Agaliotis, Juan C. Carrara, Diego S. Schicchi, George E. Totten“Heat Transfer Properties of Oxidized and Unoxidized Vegetable Oils in Comparison with Petroleum Oil-Based Quenchants”, Journal of Materials Engineering and Performance, 2013, Vol. 22, No. 7, p. 1871-1878. DOI 10.1007/s11665-013- 0514-2 629. Diego Said, Gabriela Belinato, Gustavo S. Sarmiento, Rosa L. Simencio, Otero, George E. Totten, Analía Gastón, Lauralice C.F. Canale, “Effect of the Oxidation Stability of Soybean Oil and Palm Oil

52

on Steel Quenching Performance”, Journal of Materials Engineering and Performance, 2013, Vol. 22, No. 7, p. 1929-1936. DOI 10.1007/s11665-013-0560-9. 630. Rosa L. Simencio Otero, Lauralice C.F. Canale, Diego Said Schicchi, Eliana Agaliotis, George E. Totten, Gustavo Sánchez Sarmiento, “Epoxidized Soybean Oil: Evaluation of Oxidative Stabilization and Metal Quenching/Heat Transfer Performance”, Journal of Materials Engineering and Performance 2013, Vol. 22, No. 7, p. 1937-1944. DOI 10.1007/s11665-013-0546-7 631.T. Giordani, T.R. Clarke, C.E.F. Kwietniewski, M.A. Aronov, N.I. Kobasko, G.E. Totten, “Mechanical and Metallurgical Evaluation of Carburized, Conventionally and Intensively Quenched AISI 1020 and AISI 8620 Steels “, Journal of Materials Engineering and Performance, 2013, Vol. 22, No. 8, August, p. 2304-2313. DOI 10.1007/s11665-013-0522-2 632. N.I. Kobassko, A. Marques, L.C.F. Canale, G.E. Totten, V.V. Dobryvecher, “Cooling Capacity of Petroleum Oil Quenchants as a Function of Bath Temperature”, Material Performance and Characterization, 2013, Vol. 2, No. 1, Paper ID MPC20130004, p. 468-488. 633. N.I. Kobasko, A.A. Batista Jr., L.C.F. Canale, G.E. Totten, V.V. Dobryvecher, “Cooling Capacity of Coconut, Palm and Commercial Petroleum Oil by Solving the Heat Conductivity Inverse Problem”, Material Performance and Characterization, 2013, Vol. 2, No. 1, Paper ID MPC20120047, p. 319-338. 634. F.A.P. Fernandes, S.C. Heck, G.E. Totten, and L.C. Casteletti, “Wear Evaluation of Pack Boronized AISI 1060 Steel”, Materials Performance and Characterization, 2013, Vol. 2, No.1 , Paper ID MPC 20120009. 635. Gladston T.M. Alancar, Frederico A.P. Fernandes, Carlos A. Picon, George E. Totten, Luiz C. Casteletti, “Wear and Corrosion Resistance of NiCrBSiC Self-Fluxing Coatings with the Addition of Hard Particles”, Rechuli – Heat Treatment, 2013, Vol. 28, No. 1, p. 18-21. 636.Carlos E.F. Kwietniewski, Eduardo K. Tendardini, George E. Totten, “Carburizing and Carbonitriding”, in Encyclopedia of Tribology, Eds. Q. Jane Wang and Yip-Wah Chung, 2013, Vol. 1, A-C., p. 298-306, Springer Reference, New York, NY, ISBN 978-0-387-92896-8. 637. Luiz Carlos Casteletti, Amadeu Neto Lombardi, George Edward Totten,“Boridng”, in Encyclopedia of Tribology, Eds. Q. Jane Wang and Yip-Wah Chung, 2013, Vol. 1, A-C., p. 249-255, Springer Reference, New York, NY, ISBN 978-0-387-92896-8. 638. Amadeu Neto Lombardi, Luiz Carlos Casteletti, George Edward Totten, “Thermal Spray Technologies: An Overview”, in Encyclopedia of Tribology, Eds. Q. Jane Wang and Yip-Wah Chung, 2013, Vol. 6, T-Z., p. 3607-3617, Springer Reference, New York, NY, ISBN 978-0-387-92896-8. 639. Jon L. Dossett and George E. Totten Eds., ASM Handbook: Volume 4A – Steel Heat Treating Fundamentals and Processes, 2013, ASM International, Materials Park, OH, ISBN-13: 978-1-62708-011-8 640. G.E. Totten, J. L. Dossett, N.I. Kobasko, “Quenching of Steel”, in ASM Handbook, Vol. 4A – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2013, ASM International, Materials Park, OH, p.91-157. ISBN -13: 978-1-62708-011-8 641. G.E. Totten, “Quench Process Sensors”, in ASM Handbook, Vol. 4A – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2013, ASM International, Materials Park, OH, p. 192-197. ISBN -13: 978-1-62708-011-8 642. M.A. Aronov, N.I. Kobasko. J.A. Powell, G.E. Totten, “Intensive Quenching of Steel Parts”, in 2013, ASM Handbook, Vol. 4A – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, ASM International, Materials Park, OH, p.198-212. ISBN -13: 978-1-62708-011-8

53

643. B. Liššič and G.E. Totten, “Inverse Hardening”, in ASM Handbook, Vol. 4A – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2013, ASM International, Materials Park, OH, p.213-220. ISBN -13: 978-1-62708-011-8 644. X. Luo and G.E. Totten, “Wire Patenting”, in ASM Handbook, Vol. 4A – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2013, ASM International, Materials Park, OH, p. 257-262. ISBN -13: 978-1-62708-011-8 645. L de C.F. Canale, J. Vatavuk, G.E. Totten, “Martempering of Steels”, in ASM Handbook, Vol. 4A – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2013, ASM International, Materials Park, OH, p. 362-381. ISBN-13: 978-1-62708-011-8 646. Rosa Lucia Simencio Otero, Lauralice C.F. Canale and George E. Totten, “Bioquenchants Formulated from Epoxidized Soybean Oil: Evaluation of Metal Quenching and Heat Transfer Performance”, International Journal of Mechanical Engineering and Automation (IJMEA), 2014, Vol. 1, No. 2, p. 101-110. 647. F.A. P. Fernandes, G.E. Totten, J. Gallego, L.C. Casteletti, “Plasma Nitriding and Nitrocarburizing of Supermartensitic Stainless Steel”, Rechuli (Heat Treatment), 2014, Vol. 29, No.3, Sum. No. 128, p. 20-23. 648. L.C.F. Canale, L. Albano, G.E. Totten, L. Meekisho, “Hardenability of Steel”, in Comprehensive Materials Processing, Ed.-in-Chief Saleem Hashmi, 2014, Elsevier Ltd, Kidlington, UK., Vol. 12, Article 12.03, p. 39-97. ISBN: 978-0-08-096532-1 649. L.C.F. Canale, J. Vatavuk, G.E. Totten, “Introduction to Steel Heat Treatment”, in Comprehensive Materials Processing, Ed.-in-Chief Saleem Hashmi, 2014, Elsevier Ltd, Kidlington, UK.,Vol. 12, Article 12.02, p. 3-37. ISBN: 978-0-08-096532-1 650.T. S. Prasanna Kumar, B. Hernandez-Morales, and G. E. Totten, ““Reference QuenchProbe”—An Alternative Probe Design for In-Situ Estimation of Cooling Rates, Heat Flux, and Hardenability During Immersion Quenching of Hardenable Steels”, Materials Performance and Characterization, 2014, Vol. 3, No.4 , p. 371-394. Paper ID MPC20140003. 651.G. M. Martinez-Cazares, D. E. Lozano, M. P. Guerrero-Mata, R. Colas, and G. E. Totten, “High-Speed Quenching of High-Carbon Steel”, Materials Performance and Characterization, 2014, Vol. 3, No.4 , p. 256-267.Paper ID MPC20140021. 652. D. E. Lozano,1 G. E. Totten,2 G. M. Martinez-Cazares,3 and R. Mercado-Solis,“Partial Decarburization and Intensive Quenching to Increase Fatigue Limit of Quenched Small Parts”, Materials Performance and Characterization, 2014, Vol. 3, No.4 , p. 34-43. Paper ID MPC20140008. 653. C. Civera, B. Rivolta, R. L. Simencio-Otero, J. G. Lucio, G. E. Totten, and L. C. F. Canale,“Vegetable Oils as Quenchants for Steels: Residual Stresses and Dimensional Changes”, Materials Performance and Characterization, 2014, Vol. 3, No.4 , p. 306-325.Paper ID MPC20140039. 654. Xinmin Luo and G.E. Totten, “Distortion Control Quenching Apparatus for Hardening Parts: An Overview”, Materials Performance and Characterization, 2014, Vol. 3, No.4 , p. 477-504.Paper ID MPC20130086. 655. Rosa Lucia Simencio Otero, Walker Roberto Otero, George Edward Totten and Lauralice C.F. Canale, “Quench Factor Characterization of Steel Hardening: A Review”, International Journal of Mechanical Engineering and Automation (IJMEA), 2014, Vol. 1, No. 3, p. 111-128.

54

656. Lauralice C.F. Canale, Jan Vatavuk, George E. Totten, and Xinmin Luo, “Problems Associated with Heat Treating”, in ASM Handbook, Vol. 4B – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2014, ASM International, Materials Park, OH, p. 29-73. ISBN- 978-1-62708-025-5 657. R.L.S. Otero, W.R. Otero, L.C.F. Canale, and G.E. Totten, “Quench Factor Characterization of Quenchants for Hardening of Steel”, in ASM Handbook, Vol. 4B – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2014, ASM International, Materials Park, OH, p. 304-309. ISBN- 978-1-62708-025-5 658. Xinmin Luo and George E. Totten, “Wire Cooling Curve Analysis”, in ASM Handbook, Vol. 4B – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2014, ASM International, Materials Park, OH, p. 310-314. ISBN-978-1-62708-025-5 659. ASM Handbook, Vol. 4B – Steel Heat Treating Fundamentals and Processes, Eds. J. Dossett and G. Totten, 2014, ASM International, Materials Park, OH. ISBN- 978-1-62708-025-5 660. Luiz Carlos Casteletti, Amadeu Lombardi Neto, and George E. Totten, “Nitriding of Stainless Steels”, in ASM Handbook, Vol. 4D – Heat Treating of Irons and Steels, Eds. J. Dossett and G. Totten, 2014, ASM International, Materials Park, OH, p. 418-438. ISBN-978-1-62708-066-8 661. Valery Rudnev and George E. Totten Eds., ASM Handbook: Volume 4C – Induction Heating and Heat Treatment, 2014, ASM International, Materials Park, OH, ISBN- 978-1-62708-012-5 662. ASM Handbook, Vol. 4D – Heat Treating of Irons and Steels, Eds. J. Dossett and G. Totten, 2014, ASM International, Materials Park, OH. ISBN: 978-1-62708-066-8 663. F.A. P. Fernandes, L.C. Casteletti, G.E. Totten, J. Gallego, , “Decomposition of Expanded Austenite in AISI 316L Stainless Steel Nitrided at 450°C”, Rechuli (Heat Treatment), 2014, Vol. 29, No.4, Sum. No. 129, p. 33-36. 664. Diego E. Lozano, Gabriela Martinez-Cazares, Rafael D. Mercado-Solis, Rafael Colás, George E. Totten, “Estimation of Transient Temperature Distribution during through a Parabolic Model”,Strojniški vestnik - Journal of Mechanical Engineering (Slovenia), 2015, Vol.61, No.2, p. 107-114. DOI:10.5545/sv-jme.2014.1997. 665. Gustavo Bortoluci de Assis, Fábio Edson Mariani , Amadeu Lombardi Neto, George Edward Totten, Luiz Carlos Casteletti , “Austempering and Boroaustempering Treatments for Gray Cast Iron”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 163, ISBN: 978-88-98990-03-0. 666. Luiz Carlos Casteletti , Gustavo Takeya, Galtiere Rego, Amadeu Lombardi Neto, Carlos Alberto Picon , George E. Totten , “CORROSION RESISTANCE OF PACK ALUMINIZED TI-AL-4V ALLOY”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 164, ISBN: 978-88-98990-03-0. 667. Luiz Carlos Casteletti, Gustavo Takeya, Amadeu Lombardi Neto, Carlos Alberto Picon, George E. Totten, “Influence of the Boronizing Treatment on Fe-Mn-Al-Si-C Steel”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015,Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 165, ISBN: 978-88-98990-03-0. 668. Luiz Carlos Casteletti, Gustavo Satoru Takeya, Fábio Edson Mariani, Amadeu Lombardi Neto, George E. Totten, “INFLUENCE OF BORONIZING ON A PRECIPITATION HARDENED NIOBIUM STAINLESS STEEL”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress,

55

Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 166, ISBN: 978-88-98990-03-0. 669. Stenio Cristaldo, Amadeu Lombardi Neto, Carlos Alberto Picon, George E. Totten, Luiz Carlos Casteletti, “Influence of Pack Boriding on the Wear and Corrosion Resistance of AISI H13 Stainless Steel”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 159, ISBN: 978-88-98990-03-0. 670. Fábio Edson Mariani, Amadeu Lombardi Neto, André Itman Filho, George E. Totten, Luiz Carlos Casteletti, “Boroaustempering Thermochemical Treatment in Nodular Cast Irons”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 160, ISBN: 978-88-98990-03-0. 671. Éder Cícero Adão Simêncio, Rosa Lúcia Simencio Otero, Lauralice de Campos Franceschini Canale, George E. Totten, “Stabilization of Vegetable Oil-Based Quenchants to Thermal-Oxidative Degradation: Experimental Strategy and Effect of Oxidation on Quenching Performance”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 140, ISBN: 978-88-98990-03-0. 672. Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Bioquenchants Based on Chemically Modified Vegetable Oil: Physical Properties and Metallurgical Behavior”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 139, ISBN: 978-88-98990-03-0. 673. Lauralice de. C.F. Canale, Jose E. Nucci, Luiggi L.M. Albano, Jan Vatavuk, George E. Totten, “Comparative Behavior of O1 ASteel Under Quenching and Tempering and Austempering”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015, Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 141, ISBN: 978-88-98990-03-0. 674. Luiz Carlos Casteletti, Gustavo Takeya, Amadeu Lombardi Neto, Carlos Alberto Picon, George E. Totten, “Corrosion Resistance of Pack Chromized Fe-Mn-Al-Si-C Steel”, European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress, Venice/Italy, 20-22 May 2015,Associazione Italiana Metallurgia, I-20121 Milano, Piazzale Rodolfo Morandi,2, Italy, Paper No. 161, ISBN: 978-88-98990-03-0. 675. E.C.A. Simencio, R.L. Simencio-Otero, L.C.F. Canale, G.E. Totten, “Stabilization of Vegetable Oil-Based Quenchants to Thermal-Oxidative Degradation: Part I – Effect of Antioxidants on Quenchant Performance”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 580-586. EISBN: 978-1-62708-105-4 676. R.L. Simencio-Otero, L.C.F. Canale, G.E. Totten, “Metallurgical Behavior of AISI 1045 Steel Quenched into Chemically Modified Bioquenchants”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 510-517. EISBN: 978-1-62708-105-4 677. J. Vatavuk, G.E. Totten, J.E. Nucci, L.L.M. Albano, L.C.F. Canale, “Comparative Impact Behavior of High C Steel After Conventional Quenching and Tempering and Austempering”, ”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 663-669. EISBN: 978-1-62708-105-4

56

678.W.J. de Freitas, G.S. Takeya, L.C. Casteletti, A. Lombardi Neto, G.E. Totten, “Influence Of Sintering Atmosphere In The Hardness And Corrosion Resistance Of 17-4 PH Stainless Steel Shaped From Powder Injection Molding Process”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 682-685. EISBN: 978-1-62708-105-4 679. F.E. Mariani, G. Bortoluci de Assis, L.C. Casteletti, A. Lombardi Neto, G.E. Totten, “Wear Properties Of A Gray Cast Iron Coated With Niobium Carbide Produced By a Pack Process”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 692-695. EISBN: 978-1-62708-105-4 680.F.E. Mariani, G. S. Takeya, L.C. Casteletti, A. Lombardi Neto, G.E. Totten, “Boroaustempering Treatment on Alloyed Ductile Irons”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 686-691. EISBN: 978-1-62708-105-4 681.F. E. Mariani, G.C. Rego, L.C. Casteletti, A. Lombardi Neto, G.E. Totten, “Study of Boriding Kinetics for Alloyed Ductile Irons”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 696-701. EISBN: 978-1-62708-105-4 682. L.C. Casteletti, F.E. Mariani, A. Lombardi Neto, A.I. Filho, G.E. Totten, “Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed With Niobium”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 706-710. EISBN: 978-1-62708-105-4 683. Stenio Cristaldo Heck, Gustavo Satoru Takeya, Luiz Carlos Casteletti, Amadeu Lombardi Neto, George Edward Totten, “Influence of Boriding Treatment on the Oxidation Resistance of the AISI H13 Tool Steel” ”, in Heat Treat 2015 Conference & Exposition Conference Proceedings, Ed. R.D. Sisson, Jr., ASM International, Materials Park, OH, October 20-22, 2015, Cobo Convention Center, Detroit, MI, USA, p. 702-705. EIBN: 978-1-62708-105-4 684. Bozo Smoljan, Dario Iljkic, George E. Totten, “Mathematical Modeling and Simulation of Hardness of Quenched and Tempered Steel”, Metallurgical and Materials Transactions B, 2015, Vol. 46B , No. 6 , December, p. 2666 – 2673. DOI: 10.1007/s11663-015-0451-6 685. R.L.S. Otero, L.C.F. Canale, W. Otero, G.E. Totten, "Quench Factor Analysis", in Encyclopedia of Iron, Steel, and Their Alloys, - Volume 4, Eds. George E. Totten and Rafael Colas, 2015, Taylor & Francis, Boca Raton, FL, USA, p. 2673 - 2682. ISBN: 9781498762670 686. Xinmin Luo and George E. Totten, “High-Carbon Steel Wire: Patenting in a Lead Bath”, inEncyclopedia of Iron, Steel and Their Alloys – Volume 3, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.1662-1668. ISBN:978149876266-3. 687. George E. Totten and Michiharu Narazaki, “Heat Treated Components: Distortion”, inEncyclopedia of Iron, Steel and Their Alloys – Volume 3, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.1634-1661. ISBN:9781498762663. 688. Robson Bussolotti, G.E. Totten, Lauralice C.F. Canale,Luigi L.M. Albano, “Delta Ferrite: Cracking of Steel Fasteners”, inEncyclopedia of Iron, Steel and Their Alloys – Volume 2, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.1070-1081. ISBN:9781466511095. 689. Rosa Simencio Otero, Luigi L.M. Albano, Lauralice C.F. Canale, George E. Totten, Lemmy Meekisho, “Quench System Design for Induction Hardening”, ”,inEncyclopedia of Iron, Steel and Their

57

Alloys – Volume 4, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.2706-2743.. ISBN: 9781498762670. 690. Luiz Castelleti, Amadeu Neto Lombardi, and George E. Totten, “Chromizing”, inEncyclopedia of Iron, Steel and Their Alloys – Volume 2, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.763-788. ISBN:9781466511095. 691. Lauralice C.F. Canale, Lemmy Meekisho, and George E. Totten, “Hardening: Practical Aspects”, inEncyclopedia of Iron, Steel and Their Alloys – Volume 2, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.1419-1442. ISBN:9781466511095. 692.Gabriela Belinato, Lauralice C.F. Canale, and George E. Totten, “Gas Quenching: High-Pressure Process and Equipment Design”, inEncyclopedia of Iron, Steel and Their Alloys – Volume 2, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.1328-1349. ISBN:9781466511095. 693.Lauralice C.F. Canale, Luigi L.M. Albano, Lemmy Meekisho, George E. Totten, and Kristina Rodgers, “Tempering Parameter Development”,inEncyclopedia of Iron, Steel and Their Alloys – Volume 5, Eds. Rafael Colás and George E. Totten, 2015, Taylor & Francis, Boca Raton, FL p.3551-3559. ISBN: 9781498762687. 694. Éder Cicero Adão Simencio, Rosa Lúcia Simencio Otero, Lauralice de Campos Franceschini Canale, George E. Totten, “Stabilization of vegetable oil-based quenchants to thermal-oxidative degradation: experimental strategy and effect of oxidation on quenching performance”, La Metallurgia Italiana, 2016, No. 3, p. 5-10. 695. L.C. Casteletti, G.S. Takeya, A.L. Neto, C.A. Picon, G.E. Totten, “Influence of Boronizing Treatment on Fe–Mn–Al–Si–C Steel”, Materials Performance and Characterization, 2016, Vol. 5, No. 1, p. 1-6, Paper ID MPC20150036. DOI: 10.1520/MPC20150036 696. Luigi L. M. Albano, Fernando S. Misina, George E. Totten, Lauralice C.F. Canale, “Development of a Laboratory Intensive Quenching (IQ) System”, IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 568-573. 697. Luigi M. Albano, João Gilberto Lúcio, Fernando S. Misina, Vojteh Leskovisek, George E. Totten, Lauralice C.F. Canale, “Intensive Quenching of AISI 5160 Spring Steel Using Small Scale Laboratory Equipment: A Progress Report”, IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 88-93 698. C. Civera,B. Rivolta,R. L. Simencio-Otero,J. G. Lucio,G. E. Totten,and L. C. F. Canale, “Study of Residual Stresses and Distortions after Steel Quenching with Vegetable Oils”, IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 361-367. 699. Wellington da S. Mattos, George E. Totten, D. Scott Mackenzie, Lauralice de Campos F. Canale, Tom Croucher, “Uphill Quenching of Aluminum Alloys: A Process Review”, IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 605-610. 700. Bozidar Liscic, Bozidar Matijevic, George E. Totten, Lauralice de C.F. Canale, “A New Probe to Measure and Evaluate the Real Quenching Intensity Based on Temperature Gradients” IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 132-138,

58

701.F.E. Mariani, G.S. Takeya, L.C. Casteletti, A.L. Neto, G.E. Totten, “Heat Treatment of Precipitation-Hardening Stainless Steels Alloyed With Niobium”, Materials Performance and Characterization, 2016, Vol. 5, No. 1, p. 38-46, Paper ID MPC20150039,. DOI: 10.1520/MPC20150039 702. Jan Vatavuk, George E. Totten, Jose E. Nucci, Luigi L.M. Albano, Lauralice de C.F. Canale, “Comparative Impact Behavior of High C Steel After Conventional Quenching and Tempering and Austempering”, Rechuli (Heat Treatment), 2015, Vol. 30, No. 6, Sum No. 137, p. 21-27.(in Chinese) . ISSN: 1008-1690. 703. R.G. Pereira, G.C. Rêgo, L.C. Casteletti, A.N. Lombardi, and G.E. Totten, “Wear Behavior of Layers Produced by Boriding and PVD Plus Boriding Treatments”, IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 611-613. 704. A.I. Filho, R.V. da Silva, W.M. Souza, J.B.R. Martins, L.C. Casteletti, and G.E. Totten, “Effect of Quenching and Tempering in Microalloyed Steels Containing Boron and Titanium”, IFHT 2016 – Conference Proceedings of the 23rd IFHTSE Congress, Savannah, GA, April 18-21, 2016, Ed. D. Scott MacKenzie, ASM International, Materials Park, OH, p. 581-585. 705. F.E. Mariani, G.C. Rêgo, A.L. Neto, G.E. Totten, L.C. Casteletti, “Wear Behavior of a Borided Nickel-Based Self-Fluxing Thermal Spray Coating”, Materials Performance and Characterization, 2016, Vol. 5, No. 4, p. 414-422, Paper ID MPC20150064. DOI: 10.1520/MPC20150064 706. F.E. Mariani, G.S. Takeya, Amadeu N. Lombardi, G.E. Totten, L.C. Casteletti, “Production and Characterization of Boride Coatings on Flame-Sprayed Martensitic Stainless Steel”, Materials Performance and Characterization, 2016, Vol. 5, No. 4, p. 423-431, Paper ID MPC20150065.DOI: 10.1520/MPC20150065 707. Gustavo Satoru Takeya, Fábio Edson Mariani, Amadeu Lombardi Neto, George Edward Totten, Luiz Carlos Casteletti, “Characterization of Coatings Obtained by Boriding Niobizing Treatment of an AISI H13 Steel”, Materials Performance and Characterization, 2016, Vol. 5, No. 4, p. 396-405, Paper ID MPC20150066,. DOI: 10.1520/MPC20150066 708. R.G. Pereira, F.E. Mariani, A.L. Neto, G.E. Totten, L.C. Casteletti, “Characterization of Layers Produced by Boriding and Boriding-PVD on AISI D-2 Tool Steel”, Materials Performance and Characterization, 2016, Vol. 5, No. 4, p. 406-413, Paper ID MPC20150067,. DOI: 10.1520/MPC20150067 709. G.C. Rêgo, G.S. Takeya, A.L. Neto, G.E. Totten, L.C. Casteletti, “Production of Aluminide Layers on Copper and Copper Alloy”, Materials Performance and Characterization, 2016, Vol. 5, No. 4, p. 485-496, Paper ID MPC20150068. DOI: 10.1520/MPC20150068 710. J. Vatavuk, G. E. Totten, J. E. Nucci, L. L. M. Albano, and L. d. C. F. Canale, “Comparative Impact Behavior of High-C Steel after Conventional Quenching, Tempering and Austempering”, Materials Performance and Characterization, 2016, Vol. 5, No. 1, p. 227-238, Paper ID MPC20150068,. DOI: 10.1520/MPC20150042 711. B. Liščić, B. Matijevic, G. E. Totten, L. de C.F. Canale, “Comparative Measurement and Evaluation of the Quenching intensity of Petroleum Quench Oil and Palm Oil Based on Temperature Greadients”, in MCHT&SE 2016 – 3rd Mediterranean Conference on Heat Treating and Surface Enginerring, Grand Hotel Bernardin, Portorož, Slovenia, 26-28 September, 2016, Eds. V. Leskovšek, B. Smoljan, M. Pellizzari, B. Podgornik, M. Sedlaček, Slovenian Society for Heat Treatment, Institute of Metals and Technology, Ljubljana, Slovenia, Session – Heat Treatment, Paper No. 6.ISBN 978-961-92518-9-8 712.Luigi L.M. Albano, Fernando S. Misina, |Antonio C. Canale, George E. Totten,Lauralice C.F. Canale, “Development and Use of a Small Laboratory Intensive Quenching (IQ) System and the Successful Use to Quench AISI 5160 Steel”, in MCHT&SE 2016 – 3rd Mediterranean Conference on Heat Treating and

59

Surface Enginerring, Grand Hotel Bernardin, Portorož, Slovenia, 26-28 September, 2016, Eds. V. Leskovšek, B. Smoljan, M. Pellizzari, B. Podgornik, M. Sedlaček, Slovenian Society for Heat Treatment, Institute of Metals and Technology, Ljubljana, Slovenia, Session – Heat Treatment, Paper No. 13.ISBN 978-961-92518-9-8 713. W.S. Mattos, G.E. Totten, L.C.F. Canale, “Uphill Quenching of Aluminum Alloys”, in MCHT&SE 2016 – 3rd Mediterranean Conference on Heat Treating and Surface Enginerring, Grand Hotel Bernardin, Portorož, Slovenia, 26-28 September, 2016, Eds. V. Leskovšek, B. Smoljan, M. Pellizzari, B. Podgornik, M. Sedlaček, Slovenian Society for Heat Treatment, Institute of Metals and Technology, Ljubljana, Slovenia, Session – Heat Treatment, Paper No. 14, ISBN 978-961-92518-9-8 714. R.L.S. Otero, L.C.F. Canale, G.E. Totten, “Vegetable Oil Quenchants with Substantially Improved Thermal Oxidative Stability: A Review and Proposal”, in MCHT&SE 2016 – 3rd Mediterranean Conference on Heat Treating and Surface Enginerring, Grand Hotel Bernardin, Portorož, Slovenia, 26-28 September, 2016, Eds. V. Leskovšek, B. Smoljan, M. Pellizzari, B. Podgornik, M. Sedlaček, Slovenian Society for Heat Treatment, Institute of Metals and Technology, Ljubljana, Slovenia, Session – Heat Treatment, Paper No. 15, ISBN 978-961-92518-9-8 715.Gustavo Satoru Takeya,Fabio Edson Mariani, Amadeu N. Lombardi, Luiz C.Casteletti, George E. Totten, “Characterization of a Plasma Nitrocarburized Fe, 31.2- Mn,7.5-Al, 1.3-Si, 0.9-C Steel Alloy”, in MCHT&SE 2016 – 3rd Mediterranean Conference on Heat Treating and Surface Enginerring, Grand Hotel Bernardin, Portorož, Slovenia, 26-28 September, 2016, Eds. V. Leskovšek, B. Smoljan, M. Pellizzari, B. Podgornik, M. Sedlaček, Slovenian Society for Heat Treatment, Institute of Metals and Technology, Ljubljana, Slovenia, Session – Surface Engineering, Paper No. 2, ISBN 978-961-92518-9-8 716. F.E. Mariani, G.S. Takeya, L.C. Casteletti, A. Neto Lombardi, G.E. Totten, “The Kinetics of Boride Formation Layers in Pure Niobium”, in MCHT&SE 2016 – 3rd Mediterranean Conference on Heat Treating and Surface Enginerring, Grand Hotel Bernardin, Portorož, Slovenia, 26-28 September, 2016, Eds. V. Leskovšek, B. Smoljan, M. Pellizzari, B. Podgornik, M. Sedlaček, Slovenian Society for Heat Treatment, Institute of Metals and Technology, Ljubljana, Slovenia, Session – Characterization, Paper No. 8, ISBN 978-961-92518-9-8 717. George E. Totten, Luigi L.M. Albano, Lauralice C.F. Canale, “The “Black Hole” of Heat Treating: Brine Quenching”, in the Proceedings of the 5th Asian Conference on Heat Treatment and Surface Engineering”, 12-14 November, 2016, Hangzhou, China, Chinese Heat Treatment Society, Beijing, China. p.18-29. 718. Bozidar Liscic, Bozidar Matijevic, George E. Totten, Lauralice C.F. Canale, “Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil and Canola Oil Based on Temperature Gradients”, in the Proceedings of the 5th Asian Conference on Heat Treatment and Surface Engineering”, 12-14 November, 2016, Hangzhou, China, Chinese Heat Treatment Society, Beijing, China. p. 277-283. 719. Wellington da S. Mattos, George E. Totten, D. Scott MacKenzie, Lauralice C.F. Canale, Tom Croucher, “Uphill Quenching of Aluminum Alloys”, in the Proceedings of the 5th Asian Conference on Heat Treatment and Surface Engineering”, 12-14 November, 2016, Hangzhou, China, Chinese Heat Treatment Society, Beijing, China. p.284-290. 720. Luigi L.M. Albano, Fernando S. Misina, George E. Totten, Laquralice C.F. Canale, ‘Equipment and Process for Intensive Quenching of AISI 5160 Spring Steel: Proof of Concept”, in the Proceedings of the 5th Asian Conference on Heat Treatment and Surface Engineering”, 12-14 November, 2016, Hangzhou, China, Chinese Heat Treatment Society, Beijing, China. p 291-297. 721. Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, “Vegetable Oil Quenchants with Substantially Improved Thermal Oxidative Stability”, in the Proceedings of the 5th Asian Conference on Heat Treatment and Surface Engineering”, 12-14 November, 2016, Hangzhou, China, Chinese Heat Treatment Society, Beijing, China. p. 298-307.

60

722. Bozidar Matijevic, Bozidar Liscic, George E. Totten, Lauralice Canale, "Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil, Canola Oil and a Conventional Petroleum Oil Quenchant Based on Temperature Gradient Measurements", Materials Performance and Characterization, 2017, Vol. 6, No. 5, p. 757-776, Paper ID MPC20170042. DOI: https://doi.org/10.1520/MPC20170041 723. W. S. Mattos; Thiago Ferreira; G. E.Totten; D. Scott MacKenzie; L.C.F.Canale. Distortion and Intergranular Corrosion (IGC) Analysis using PAG II Polymer and Uphill Quenching for AA7075-T6 Alloys Heat Treatment. 22th Brazilian Congress in Engineering and MaterialsScience (CBECiMat), November 6-10, 2016, Natal, Brasil, ISSN 1519-4787. 724.Rosa L. Simencio Otero, Lauralice C.F. Canale, George E. Totten, Lemmy Meekisho,“Vegetable Oils as Metal Quenchants: A Comprehensive Review”, Materials Performance and Characterization, 2017, Vol. 6, No. 1, p. 174-250 . DOI: 10.1520/MPC20160112. 725. F. E. Mariani, G. S. Takeya, L. C. Casteletti, A. N. Lombardi, and G.E. Totten, “Kinetics of Layers Produced on Niobium by Salt Bath Boriding”, Materials Performance and Characterization, 2017, Vol. 6, No. 4, p. 467-474. DOI: 10.1520/MPC20160095 726. C. Soares, F.E. Mariani, L.C. Casteletti, A.N. Lombardi, and G.E. Totten, “Characterization of Niobium Carbide Layers Produced in Ductile Cast Iron Using Thermo-Reactive Treatments,” Materials Performance and Characterization, 2017, Vol. 6, No. 4, p. 607-616.DOI: 10.1520/MPC20160093. 727. F.E. Mariani, R.T.Jr. Aureliano, L.C. Casteletti, A.N. Lombardi, and G.E. Totten, “Characterization and Wear Performance of Borided AISI 304 and UNS S31254 Stainless Steels,” Materials Performance and Characterization, 2017, Vol. 6, No. 4, p. 523-530. DOI: 10.1520/MPC20160096 728. G.S. Takeya, F.E. Mariani, L.C. Casteletti, A.N. Lombardi, and G.E. Totten, “Aging of a Fe- Mn-Al Steel Using Plasma Nitrocarburizing,” Materials Performance and Characterization, 2017, Vol. 6, No. 4, p. 554-559, DOI: 10.1520/MPC20160094 729. Fábio Edson Mariani, Gustavo Bortoluci de Assis, Luiz Carlos Casteletti, Amadeu Lombardi Neto, and George Edward Totten, “Austempering and Boro-Austempering Treatments in Gray Cast Iron”, Materials Performance and Characterization, 2017, Vol. 6, No. 1, p. 262-271, DOI: 0.1520/MPC20150038 730. Galtiere C. Rêgo, Rafael M. Bandeira, Ricardo T. Aureliano, Jr., Amadeu N. Lombardi, Luiz C. Casteletti, and George E. Totten, “Silica-Based Coatings for Corrosion Protection of AA7075 Aluminum Alloy”, Materials Performance and Characterization, 2017, Vol. 6 , No.5 , p. 904-912. DOI: 10.1520/MPC20170020 731. W. S. Mattos, G. E. Totten, and L. C. F. Canale, “Uphill Quenching of Aluminum Alloys”, Materials Performance and Characterization, 2017, Vol. 6 , No. 5, p. 894-903,DOI: 10.1520/MPC20160125 732. W. da S. Mattos, T. Ferreira, G.E. Totten, and L. de Campos F. Canale, "Uphill Quenching of Aluminum Alloys",Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24–26, 2017, Columbus, Ohio, USA, 11 pp 733. R.R. da Silva, Jr., G.E. Totten, J.C. Vendramim, and L. de Campos F. Canale, “Thermal Fatigue in Hot Work Tool Steels-A Review”, Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24–26, 2017, Columbus, Ohio, USA, 13 pp 734.R.L. Simencio Otero, J.M. Viscaino, C.F. Canale, G.E. Totten, and L. Meekisho, “Quenchant Characterization using the TENSI Probe”, Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24–26, 2017, Columbus, Ohio, USA, 4 pp

61

735.P.G.B. de Oliveira, R. Tadeu, Jr. Aureliano, F.E. Mariani, G.E. Totten, and L.C. Casteletti, “Boriding of AISI 440B Stainless Steel and Coating Characterization”, Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24–26, 2017, Columbus, Ohio, USA, 5 pp 736.C. Soares, F.E. Mariani, G.C. Rego, G.S. Takeya, G.E. Totten, and L.C. Casteletti, “Corrosion Resistance of Niobium and Vanadium Carbide Layers Produced by Thermoreactive Diffusion Treatmentson Spheroidal Cast Iron ”, Heat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24–26, 2017, Columbus, Ohio, USA, 6 pp 737. Luigi L. M. Albano, Fernando S. Misina, Antonio C. Canale,George E. Totten, and Lauralice C. F. Canale, “Development and Use of a Small Laboratory Intensive Quenching (IQ) System”, Materials Performance and Characterization, 2017, Vol. 6, No.5, p. 785-794,DOI: 10.1520/MPC20160126 738. George E. Totten, Ed. ASM Handbook: Volume 18 – Friction, Lubrication and Wear Technology – 2017, ASM International, Materials Park, OH, ISBN: 978-1-62708-141-2. 739. Frederico Augusto Pires Fernandes, Carlos Alberto Picone, George Edward Totten, Luiz Carlos Casteletti, “Corrosion Behavior of Plasma Nitrided and Nitrocarburised Supermartensitic Stainless Steel”, Mat. Res., 2018, Vol.21 No.3, ISSN 1516-1439, DOI: http://dx.doi.org/10.1590/1980-5373-mr-2016-0793 740. DamingTong, JianfengGu, GeorgeE.Totten, “Numerical Investigation of Asynchronous Dual-Frequency Induction Hardening of Spur Gear”, International Journal of Mechanical Sciences, 2018, Vol. 142–143, p. 1–9. DOI: https://doi.org/10.1016/j.ijmecsci.2018.04.036 741. Fábio Edson Mariani, Carolina Soares,Amadeu Lombardi Neto, George Edward Totten,Luiz Carlos Casteletti, “Boro-Austempering Treatment of Ductile Cast Irons”, Mat. Res. vol.21 no.5 São Carlos 2018 Epub July 16, 2018. DOI: http://dx.doi.org/10.1590/1980-5373-mr-2017-0927ISSN1980-5373 742. N.I. Kobasko, A.A. Moskalenko, P.N. Logvynwnko, G.E. Totten, V.V. Dobryvechir, “New Era in Designing and Governing Cooling Intensity of Liquid Quenchants to Decrease Distortion During Hardening of Steel Parts”, International Journal of Current Research, 2018, Vol. 10, No. 8, August, p. 72631-72636. DOI: doi.org/10.24941/ijcr.31683.08.2018. ISSN: 0975-833X. 743. Xinmin Luo and George E. Totten, “Evolution from Cooling Modeling to Cooling Engineering of the Steel Quenching Process: A Technology Overview”, Materials Performance and Characterization, 2019, Vol.8 , No. 2, p. 213-240 , https://doi.org/10.1520/MPC20180028. ISSN 2379-1365 744. Rosa L. Simencio Otero, Patricia M. Kavalco, Lauralice C.F. Canale, George E. Totten, Lemmy Meekisho, “Quench Factor Analysis: An Overview”, in Encyclopedia of Aluminum and Its Alloys, First Edition, Editors: George E. Totten, Murat Tiryakioglu, Olaf Kessler, 2018, Taylor & Francis, Boca Raton, FL, p. 2173-2188. DOI: 10.1201/9781351045636-140000233 ISBN: 9781466510807. 745. Patricia Mariane Kavalco, Lauralice Canale, George Totten, “Strength and Intergranular Corrosion of Aluminum Alloys: Effect of Cooling Rate”, in Encyclopedia of Aluminum and Its Alloys, First Edition, Editors: George E. Totten, Murat Tiryakioglu, Olaf Kessler, 2018, Taylor & Francis, Boca Raton, FL, p. 2543-2548. DOI: 10.1201/9781351045636-140000233 ISBN: 9781466510807. 746. Wellington da Silva Mattos, Barbara Rivolta, George Totten, Lemmy Meekisho, Lauralice de Campos Franceschini Canale, “Quenching of Aluminum Alloys”, in Encyclopedia of Aluminum and Its Alloys, First Edition, Editors: George E. Totten, Murat Tiryakioglu, Olaf Kessler, 2018, Taylor & Francis, Boca Raton, FL, p. 2224-2283. DOI: 10.1201/9781351045636-140000233 ISBN: 9781466510807.

62

747. Wellington da Silva Mattos, George Edward Totten, Lauralice de Campos Franceschini Canale, “Uphill Quenching of Aluminum Alloys”, in Encyclopedia of Aluminum and Its Alloys, First Edition, Editors: George E. Totten, Murat Tiryakioglu, Olaf Kessler, 2018, Taylor & Francis, Boca Raton, FL, p. 2757-2770. DOI: 10.1201/9781351045636-140000233 ISBN: 9781466510807. 748. L. C. Casteletti, A. Lombardi Neto, D. T. de Macedo, L. B. Cruvinel, George Totten, “Stellite Superalloy Powder Deposition on 7075 Aluminum Alloy”, in Encyclopedia of Aluminum and Its Alloys, First Edition, Editors: George E. Totten, Murat Tiryakioglu, Olaf Kessler, 2018, Taylor & Francis, Boca Raton, FL, p. 2523-2527. DOI: 10.1201/9781351045636-140000233 ISBN: 9781466510807. 749. George E. Totten, Murat Tiryakioglu, Olaf Kessler (EDS), Encyclopedia of Aluminum and Its Alloys, First Edition (2 Volumes), 2018, Taylor & Francis, Boca Raton, FL, ISBN: 9781466510807. 750. Rosa Simencio Otero, Jônatas M. Viscaino, J. Xu, J. Gu, George E. Totten, Lauralice C.F. Canale,“Quenchant Cooling Curves, Rewetting and Surface Heat Flux Properties of Vegetable Oils”, Materials Performance and Characterization, 2019, Vol. 8 , No. 2 ,p. 143-169, https:// DOI: 10.1520/MPC20180042, ISSN: 2379-1365 751. Lemmy Meekisho, Rosa L. Simencio Otero,Jônatas M. Viscaino, D. Scott MacKenzie, George E. Totten, and Lauralice C. F. Canale, “Assessment of Cooling and Heat Transfer Properties of Quenchants with MATLAB”, Materials Performance and Characterization, 2019, Vol. 8 , No. 2 ,p. 128-142, https:// DOI: 10.1520/MPC20180046, ISSN: 2379-1365. 752. Zoltán Fried, Imre Felde, Rosa L. Simencio Otero, Jônatas M. Viscaino, George E. Totten, and Lauralice C. F. Canale, “Parallelized Particle Swarm Optimization to Estimate the Heat Transfer Coefficients of Palm Oil, Canola Oil, Conventional, and Accelerated Petroleum Oil Quenchants”, Materials Performance and Characterization, 2019, Vol. 8 , No. 2 ,p. 96-113 , https:// DOI: 10.1520/MPC20180049, ISSN: 2379-1365 753. Vinícius Richieri Manso Gonçalves, Bojan Podgornik, Vojteh Leskovšek, George Edward Totten & Lauralice de Campos Franceschini Canale, “Influence of Deep Cryogenic Treatment onthe Mechanical Properties of Spring Steel”, Journal of Materials Engineering and Performance (JMEPEG), 2019, Vol. 28, February, No. 2, p. 769-775. https://doi.org/10.1007/s11665-019-3864-6. ISSN: 1059-9495 754. Rosa Lucia Simencio Otero, Lemmy Meekisho, Lauralice de Campos Franceschini Canale, George Edward Totten, “Vegetable oil quenchants: a review”, Int. J. Microstructure and Materials Properties, 2019, Vol. 14, No. 4, 2019, DOI: 10.1504/IJMMP.2019.101800 ISSN: 1741-8410 755. Bozidar Matijevic, Bruno Canale, Bozidar Liscic, George E. Totten,“Using Thermal Gradient Measurements, to Compare Bath Temperature and Agitation Effects on the Quenching Performance of Palm Oil, Canola Oil and a Conventional Petroleum Oil”, Materials Performance and Characterization, 2019, Vol. 8 , No. 1, p. 223-248, doi:10.1520/MPC20180135 . ISSN 2379-1365 756. Diego E. Lozano, George E. Totten, Yaneth Bedolla-Gil, Martha Guerrero-Mata, Marcel Carpio, Gabriela M. Martinez-Cazares, “X-ray Determination of Compressive Residual Stresses in Spring Steel Generated by High-Speed Water Quenching”, Materials, 2019, Vol. 12, Vol. 7. P. 1154; doi:10.3390/ma12071154, ISSN: 1996 – 1944 757. LuísH.PizettaZordão,ViníciusA.Oliveira,GeorgeE.Totten,LauraliceC.F.Canale,“Quenching power of aqueous salt solution”, International Journal of Heat and Mass Transfer, 2019, Vol. 140, p. 807-818. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.036, ISSN:0017-9310758.G.E. Totten, R. Shah, D.R. Forester, Eds., Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing – 2nd Edition, 2019, ASTM International, Conshohocken, PA. (ASTM Stock Number: MNL37-2ND) 1808 pp. ISBN: 978-0-8031-7089-6.

63

759. Bozidar Liščič, Rosa L. Simenico Otero, Luigi L. M. Albano, George E. Totten, and Lauralice C. F. Canale, “Chapter 24 - Nonlubricating Process Fluids: Steel Quenching Technology”, G.E. Totten, R. Shah, D.R. Forester, Eds., Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing – 2nd Edition, 2019, ASTM International, Conshohocken, PA. p. 977-1036. (ASTM Stock Number: MNL37-2ND) ISBN: 978-0-8031-7089-6 760. Huaping Xiao, George E. Totten, Hong Liang, “Chapter 46 – Lubrication and Tribology Fundamentals”, G.E. Totten, R. Shah, D.R. Forester, Eds., Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing – 2nd Edition, 2019, ASTM International, Conshohocken, PA. p.1565-1630. (ASTM Stock Number: MNL37-2ND) ISBN: 978-0-8031-7089-6 761. Rafael Magalhães Triani, Fábio Edson Mariani, Lucas Fuscaldi De Assis Gomes, Pedro Gabriel Bonella De Oliveira, George Edward Totten and Luiz Carlos Casteletti, “Improvement of the Tribological Characteristics of AISI 8620, 8640 and 52100 Steels through Thermo-Reactive Treatments”, Lubricants, 2019, Vol. 7, No. 63, p. 1-13. DOI: 10.3390/lubricants7080063. ISSN 2075-4442 762. 43. Leszek A. Dobrzański, George E. Totten, Menachem Bamberger,Eds., Magnesium and it Alloys – Technology and Applications, 2019, CRC Press, Boca Raton, FL. ISBN: 978-1-4665-9662-7 763. Pedro Gabriel Bonella de Oliveira, Ricardo Tadeu Junior Aureliano, Luiz Carlos Casteletti, Andre Itman Filho, Amadeu Lombardi Neto, and George Edward Totten, “Additive Wear Resistance of Low Temperature Austempered and Quenched and Partitioned Niobium Alloyed Steels”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, Eds. Robert Goldstein and Olga Rowan, October 15-17, 2019, Detroit Michigan, USA, p. 193-199. ISBN-13: 978-1-62708-277-8. 764. Rafael Magalhaes Triani, Lucas Fuscaldi, De Assis Gomez, Luiz Carlos Casteletti, Amadeo Lombardi Neto, and George Edward Totten, “Production and Characterization of Boride and Carbide Layers on AISI 15B30 Steel”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, Eds. Robert Goldstein and Olga Rowan, October 15-17, 2019, Detroit Michigan, USA, p. 200-206. ISBN-13: 978-1-62708-277-8. 764 Rafael Magalhaes Triani, Fabio Edson Mariani, Luiz Carlos Casteletti, Andre Itman Filho, Amadeu Lombardi Neto, and George Edward Totten, “Boro-Austempering Treatment of High-Strength Bainitic Steels”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, Eds. Robert Goldstein and Olga Rowan, October 15-17, 2019, Detroit Michigan, USA, p. 207-213. ISBN-13: 978-1-62708-277-8. 765. Luis Henrique Pizetta Zordao, Lauralice de C.F. Canale, and George E. Totten, “Investigation of Quenchants Based on Sodium Aqueous Ionic Solutions”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, Eds. Robert Goldstein and Olga Rowan, October 15-17, 2019, Detroit Michigan, USA, p. 253-259. ISBN-13: 978-1-62708-277-8. 766. Rosa L. Simencio Otero, Sandor Szenasi, Zoltan Fried, Imre Felde, Jonatus M. Viscaino, Lauralice C,F. Canale, and George E. Totten, “Parallelized Partical Swarm Optimization to Estimate the Heat Transfer Coefficients of Vegetable Oils in Comparison with Typical Fast Petroleum Quench Oil Quenchant”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, Eds. Robert Goldstein and Olga Rowan, October 15-17, 2019, Detroit Michigan, USA, p. 260-271. ISBN-13: 978-1-62708-277-8. 767. Jianfeng Gu, Jun Xu, Rosa L. Simencio Otero, Jonatus M. Viscaino, Lauralice C,F. Canale, and George E. Totten, “Heat Transfer Coefficients and Quenchaning Performance of Vegetable Oils”, Heat Treat 2019: Proceedings of the 30th ASM Heat Treating Society Conference, Eds. Robert Goldstein and Olga Rowan, October 15-17, 2019, Detroit Michigan, USA, p. 272-278. ISBN-13: 978-1-62708-277-8. 768.

64

NATIONAL AND INTERNATIONAL STANDARDS AND GUIDES 1. International Standard, ISO 9950 - "Industrial Quenching Oils - Determination of Cooling Characteristics - Nickel-Alloy Probe Test Method", 1995-05-01. 2. NFPA Information Report NFPA/T2.13.8-1995, "Information Report - Hydraulic fluid power - Fire resistant fluids - Definitions, classifications, and testing", December 6, 1995. 3. NFPA Recommended Standard NFPA/T2.13.1 R3-1997, “Recommended practice - Hydraulic Fluid Power - Use of fire resistant fluids in industrial systems, 4th Ed., August 14, 1997.

4. ASTM D6200-97, “Standard Test Method for Determination of Cooling Characteristics of Quench oils by Cooling Curve Analysis”, December 10, 1997. 5. ASTM D6482-99, “Standard Method for Cooling Curve Analysis of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)”, November 10, 1999. 6. ASTM D6666-01, “Standard Guide for Standard Guide for Evaluation of Aqueous Polymer Quenchants” 7. ASTM D6710-01, “Standard Guide for Evaluation of Hydrocarbon-Based Quench Oils” 8.ASTM D6813–02, “New Standard Guide for the Performance Of Hydraulic Fluids For Piston Pumps” 9. ASTM D7646-10, “Standard Method for Determination of Cooling Characteristics of Aqueous Polyme4r Quenchants for Aluminum Alloys by Cooling Curve Analysis”

BOOKS AND PROCEEDINGS COEDITED AND COAUTHORED

1. Totten, G.E., Ed., Conf. Proceed. Quenching and Distortion Control, ASM International, Materials Park, OH, 1992. ISBN: 978-0-8717-0455-9. 2. G.E. Totten, C.E. Bates and N.A. Clinton, Handbook of Quenchants and Quenching Technology, ASM International, Materials Park, OH, 1993. ISBN: 978-0-8717-0448-1. 3. G.E. Totten and R.A. Wallis, Ed.,Heat Treating: Equipment and Processes - 1994 Conference Proceedings, ASM International, Materials Park, OH, Schaumberg, IL; April 1994. ISBN: 978-0-8717-0508-2. 4. G.E. Totten and J. Reichel, Ed.,Fire Resistance of Industrial Fluids, ASTM STP 1284, June 1995. ISBN: 978-0-8031-2041-9. 5. George E. Totten, Gary H. Kling and and Donald M. Smolenski, Ed.,Tribology of Hydraulic PumpTesting ASTM STP 1310, American Society for Testing and Materials, Philadelphia, 1995. ISBN: 978-0-8031-2422-6. 6. G.E. Totten, K. Funatani, M.A.H. Howes and S. Sjostrom Eds., Conf. Proceed. 2nd InternationalConference on Quenching and Control of Distortion, ASM International, Materials OH, 1996. ISBN: 978-0-8717-0584-6. 7. G.E. Totten and M.A.H. Howes Ed., Steel Heat Treatment Handbook, 1997, Marcel Dekker, Inc., New York.

65

8. G.E. Totten, Handbook of Hydraulic Fluid Technology, 1999, Marcel Dekker, Inc. New York, .ISBN: 978-0-8247-6022-9 9. G.E. Totten, H.M. Tensi and B. Liscic, Conf. Proceed.3rd International Conference on Quenching and Control of Distortion, ASM International, Materials OH, Prague, Czrch Republic, March 24-26,1999 10. G.E. Totten, L.D. Wedeven, J.R. Dickey and M. Anderson, Bench Testing of the Lubrication and Wear Properties of Industrial Fluids Used in Machinery Applications ASTM STP 1404, American Society for Testing and Materials, Philadelphia, 2001. ISBN: 978-0-8031-2867-5. 11.G.E. Totten, D.K. Wills, and D. Feldmann, Hydraulic Failure Analysis: Fluids, Components and System Effects ASTM STP 1339, American Society for Testing and Materials, Philadelphia, 2001. ISBN: 978-0-8031-2883-5.

12. G.E. Totten, M.A.H. Howes and T. Inoue, Handbook of Residual Stress and Deformation of Steel, 2002, ASM International, Materials Park, OH. ISBN: 978-0-8717-0729-1. 13. G.E. Totten, S. Westbrook, and R. Shah, Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing, 2003, ASTM International, Conshohocken, PA. ISBN: 978-0-8031-2096-9. 14. G.E. Totten and D.S. MacKenzie, ,Handbook of Aluminum: Vol. 1 - Physical Metallurgy and Processes 2003, Marcel Dekker, New York.ISBN: 978-0-8247-0494-0. 15. G.E. Totten and D.S. MacKenzie, ,Handbook of Aluminum: Vol. 2 – Alloy Production and materials Manufacturing, 2003, Marcel Dekker, New York. ISBN: 978-0-8247-0896-2. 16. G.E. Totten, L. Xie and K. Funatani, Eds., Handbook of Mechanical Alloy Design, 2003, Marcel Dekker Inc., New York, NY.ISBN: 978-0-8247-4308-6. 17. G.E. Totten, L. Xie and K. Funatani, Eds., Modeling and Simulation for Material Selection and Mechanical Design, 2004, Marcel Dekker Inc., New York, NY.ISBN: 978-0-8247-4746-6. 18. G.E. Totten and H. Liang, Eds., Surface Modifications and Mechanisms: Friction, Stress and Reaction Engineering, 2004, Marcel Dekker, New York, NY. ISBN: 978-0-8247-4872-2. 19. G.E. Totten and H. Liang, Eds., Mechanical Tribology: Materials, Characterization and Applications, 2004, Marcel Dekker, New York, NY. ISBN: 978-0-8247-4873-9. 20. G.E. Totten, K. Funatani and L. Xie, Eds., Handbook of Metallurgical Process Design, 2004, Marcel Dekker, New York, NY.ISBN: 978-0-8247-4106-8. 21. D.S.MacKenzie and G.E. Totten, Eds., “Analytical Characterization of Aluminum, Steel, and Superalloys, 2005, CRC Press, Boca Raton, FL. ISBN: 978-0-8247-5843-1. 22. G.E. Totten (Ed.), Handbook of Lubrication and Tribology: Volume 1 – Application and Maintenance, Second Edition, 2007, CRC Press - Taylor and Francis Group, Boca Raton, FL. ISBN: 978-0-8493-2095-8 23. G. S. Fox-Rabinovich and G.E. Totten, Eds., Self-Organization During Friction: Advanced Surface Engineered Materials and Systems Design, 2007, CRC Press, Boca Raton, FL. ISBN: 978-1-5744-4719-4. 24. G.E. Totten (Ed), Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Metallurgy and Technologies,2007, CRC Press Taylor & Francis Group, Boca Raton, FL. ISBN: 978-0-8493-8455-4*

66

25. G.E. Totten (Ed), Steel Heat Treatment Handbook, Second Edition – Steel Heat Treatment: Equipment and ProcessDesign, 2007, CRC Press Taylor & Francis Group, Boca Raton, FL. ISBN:978-0-8493-8454-7*

26. G.E. Totten (Ed), Steel Heat Treatment Handbook, Second Edition– 2-Volume Set; ISBN:978-0-8247-2741-3 27. L.C.F. Canale, R.A. Mesquita, and G.E. Totten, Eds., Failure Analysis of Heat Treated Steel Components, 2008, ASM International, Materials Park, OH. ISBN: 978-0-8717-0868-7. 28. R.W. Gresham and G.E. Totten, Lubrication and Maintenance of Industrial Machinery: Best Practices and Reliability, 2008, CRC Press, Boca Raton, FL. ISBN: 978-1-4200-8935-6. 29. B. Liščić, H.M. Tensi, L.C.F. Canale and G.E. Totten, Quenching Theory and Technology 2ndEdition, 2010, CRC Press, Boca Raton, FL. ISBN: 978-0-8493-9279-5 30. N.I. Kobasko, M.A. Aronov, J. Powell and G.E. Totten, Intensive Quenching Systems: Engineering and Design , 2010, ASTM International, West Conshohocken, PA. ISBN: 978-0-8031-7019-3 31. G.E. Totten and. V. De Negri, Handbook of Hydraulic Fluid Technology, 2nd Edition, 2011, CRC Press, Boca Raton, FL. ISBN:978-1-4200-8526-6. 32. S. Tung and G.E. Totten, Handbook of Automotive Lubrication and Testing, 2012, ASTM International, West Conshohocken, PA ., 495 pp., ISBN: 978-0-8031-7036-0 33. Jon L. Dossett and George E. Totten Eds., ASM Handbook: Volume 4A – Steel Heat Treating Fundamentals and Processes, 2013, ASM International, Materials Park, OH, ISBN-13: 978-1-62708-011-8 34. Jon L. Dossett and George E. Totten Eds., ASM Handbook: Volume 4B – Steel Heat Treating Fundamentals and Processes, 2014, ASM International, Materials Park, OH, ISBN-978-1-62708-025-5 36. Valery Rudnev and George E. Totten Eds., ASM Handbook: Volume 4C – Induction Heating and Heat Treatment, 2014, ASM International, Materials Park, OH, ISBN- 978-1-62708-012-5 37. Jon L. Dossett and George E. Totten Eds., ASM Handbook: Volume 4D – Heat Treating of Irons and Steels, 2014, ASM International, Materials Park, OH, ISBN-978-1-62708-066-8 38 George E. Totten and D. Scott MacKenzie Eds. ASM Handbook: Volume 4E – Heat Treatment of Noferrous Metals, 2016, ASM International, Materials Park, OH, ISBN 13: 978-1-62708-112-2 39. Rafael Colas and George E. Totten, Encyclopedia of Iron, Steel and Their Alloys (5 Vols), 2015, Taylor & Francis, Boca Raton, FL ISBN: 97811466511088 (Vol. 1), 9781466511095 (Vol.2), 9781498762663 (Vol. 3), 9781498762670 (Vol. 4), 9781498762687 (Vol. 5) 40.George E. Totten, Ed. ASM Handbool: Volume 18 – Friction, Lubrication and Wear Technology – 2017, ASM International, Materials Park, OH, ISBN: 978-1-62708-141-2. 41. George E. Totten, Murat Tiryakioglu, Olaf Kessler (EDS), Encyclopedia of Aluminum and Its Alloys, First Edition (2 Volumes), 2018, Taylor & Francis, Boca Raton, FL, ISBN: Vol.1: 978-1-4665-1081-4 , Vol. 2: 978-1-4665-1082-1 42. G.E. Totten, R. Shah, D.R. Forester, Eds., Fuels and Lubricants Handbook: Technology,Properties, Performance and Testing – 2nd Edition, 2019, ASTM International, Conshohocken, PA. (ASTM Stock Number: MNL37-2ND) 1808 pp. ISBN: 978-0-8031-7089-6

67

43. Leszek A. Dobrzański, George E. Totten, Menachem Bamberger, Eds., Magnesium and it Alloys – Technology and Applications, 2019, CRC Press, Boca Raton, FL. ISBN: 978-1-4665-9662-7