GEOTECH/

GEOWHITE

GEOGREY

(50)

The island of Madeira, which means wood in Portuguese, belongs to an archipelago of volcanic origin which features a special stone that has the appearance of fossil wood. This is the inspiration for Geotech. Combining fine porcelain stoneware with patterns of natural stone with new, original combinations of color and surface textures. Geotech can meet all the requirements of modern architecture.

Nature......Technology

Natural

Natural

Structured

Structured

Colors are intended as a guide only and may vary from actual tile. Please check tile samples before making final selections.

PRODUCT INFORMATION

Sizes -

Colors

Color

Sizes - Available in all colors.

Trim

Finishes

Usage & Installation

TSFGGH/160506www.tile-shop.comTILESHOP

12 x 24 FGGH--N/1224 Natural

24 x 24 FGGH--N/2424 Natural24 x 24 FGGH--S/2424 Structured24 x 48 FGGH--N/2448 Natural24 x 48 FGGH--S/2448 Structured8 x 48 FGGH--N/848 Natural8 x 48 FGGH--S/848 Structured

6 x 48 FGGH--N/648 Natural6 x 48 FGGH--S/648 Structured16 x 32 FGGH--N/1632 Natural16 x 32 FGGH--S/1632 Structured32 x 32 FGGH--N/3232 Natural32 x 32 FGGH--S/3232 Structured

FGGH--S/1224 Structured

FGGH--N/SBN 2 x 24 Surface BullnoseAvailable in Natural Finish only.

Available in both finishes.

Rectified

Geotech is suitable for both residential and commercial installations.

Surface Bullnose is made from field that is cut and ground.

FGGHWE Geo WhiteFGGHGY Geo Grey

FGGHBK Geo Black

12” x 24”

FrostResistance

SlipResistance

StructuredFinish

Natural & Structured Finish

Natural & Structured Finish

Resistant R 10

Coefficient of Friction

ASTM C1028 Wet ≥ 0.60Dry ≥ 0.60

The Coefficient of Friction is a general guide only. Testing may vary with different production runs and with different testing labs. As noted in the American with Disabilities Act (ADA) the coefficient of friction varies considerably due to facts not under the control of entities such as the manufacturers and distributors. These factors include, but are not limited to, contaminants, slope of terrain, drainage conditions, adjacent surfaces, etc. Suitability for any installation can only be determined by a site examination of all conditions that could affect the slip resistance of the tile being installed. Continual cleaning and maintenance must be performed once the tile has been installed. For more information see our current handout Americans with Disabilities Act and Slip Resistance of Tile.

U.S. GREENBUILDINGCOUNCIL

Most Italian manufactures recommend a maximum offset of 8” (20cm) on all large format tiles when setting large format tiles, ANSI A 108.2 Section 4.3.8. There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.

Installation

Non-Stock Sizes & ColorsSubject to minimum order quantities.