Get great tasting and more healthydrinking water for your entire family!

ContaminantsWater for drinking, beverages and preparing foods should be safe and free from harmful contaminants.This is partic-ularly important if you get your water from a private well. And even if your municipal water meets all standards, it may con-tain other impurities that could be responsible for long termhealth effects.

Many water quality problems.

Turbidity & colorCloudy water is due to turbidity, or finely divided particles. Color in water is most often due to dissolved organic matter.Often, these problemsresult in water that is unpleasant to drink.Turbidity and color in water can easily becorrected with point-of-usewater treatment systems.

Foul taste & odorsFrom its passage from clouds to your tap,water comes in contact with many different impurities which can produce foul taste and odors that can ruin the enjoyment of prepared foods and beverages.

If you think bottled water isthe answer, Think again!Many individuals are buyingbottled water because they are concerned aboutdrinking water quality.Bottled water is expensive,and it’s very inconvenient.Water produced by RO systems cost pennies a gallon, compared to a dollaror more for bottled water.

RO systemModel shown is our five stagesystem with three sumps, membrane, bracket and post filter.

Storage tankHigh quality water is produced by the

system and kept in a storage tank untilneeded. Plastic and metal storage

tanks are available.Pre-filtersPrior to the RO membrane, pre-filters are used to reduce sediment,taste, odors and chlorine.

Post filterProvides water polishing as waterflows from tank tofaucet.

ROPRO®

plastic storage tank is shown.Will not chip,dent or rust.Slimline design,takes lessspace belowsink!

RO membraneAll systems comewith a highefficiency, highcapacity membrane forhigh quality water.

Fittings, tubing& saddle valves

Included for a successful

installation.

Dedicated faucetProvided, to dispense waterwhere it is requiredor used.

One solution!Reverse osmosis . . .Reduces a wide spectrum of drinking water contaminants.

Reverse osmosis drinking water systems include membraneseparation, activated carbon adsorption and micro filtrationto reduce a wide spectrum of contaminants that may befound in drinking water.

Top quality reverse osmosis systemsEnjoy great tasting, high quality drinking water with our reverse osmosis systems, designed to reduce a wide range of harmful contaminants. All systems are fully assembled and include high efficiency membranes, pre-filters, post filters, bracket, storage tank, fittings, tubing and a dedicated faucet, used to dispense top quality water to point of use.

Reduces a wide spectrum of harmful contaminants

Reverse OsmosisThe most effective way to get high quality drinking water for your entire family!

Five stage models

New five stage model

FMRO4JProvides four stage treatment with 50 GPD membrane, sediment pre-filter, carbon block pre-filter, GAC post filter,ROPRO plastic storage tank, low-lead chrome faucet, 1/4" tubing and compression fittings.

Primary advantages:50 GPD output, high quality components, ROPRO® storage tankand economical cost.

FMRO4GProvides four stage treatment with 50 GPD membrane, sediment pre-filter, carbon block pre-filter, GAC post filter, ROPRO plastic storage tank, low-lead chrome faucet, 3/8" tubing from tank to faucet and genuineJohn Guest® , quick connect fittings.

Primary advantage:50 GPD output, easy installation with quick connect fittings and ROPRO® storage tank.

FMRO5JProvides five stage treatment with 50 GPDmembrane, sediment pre-filter, carbon blockpre-filter, GAC pre-filter,GAC post filter, ROPROplastic storage tank, low-lead chrome faucet, 1/4"tubing and compression fittings.

Primary advantages:Five stage treatment,ROPRO® storage tank and and economical cost.

FMRO5GProvides five stage treatment with 50 GPDmembrane, sediment pre-filter, carbon block pre-filter, GAC pre-filter, GACpost filter, ROPRO plasticstorage tank, low-leadchrome faucet, 3/8" tubingfrom tank to faucet andgenuine John Guest®

quick connect fittings.

Primary advantages:Five stage treatment, easyinstallation with quick connect fittings andROPRO® storage tank.

FMRO5-MT SystemFive stage system, comes complete with 50 GPD membrane, one sediment pre-filter, two carbon block pre-filters, GAC post filter, low-lead chrome faucet, metalstorage tank , saddle valves, 1/4" tubing for feed water,3/8" tubing from tank to faucet and quick connect fittingsfor inlet and outlet connections. Economical price!

Specifications:Production 50 GPDMembrane rejection 96% (typical)Tank capacity 4 gallonsTemperature range 40°F - 100°FPressure (min. / max.) 30 - 100 psi

Primary advantages: 50 GPD capacity, top qualitycomponents and highly attractive pricing.

Reverse Osmosis SystemsFour stage models

FMRO5GP-115 / FMRO5GP-220Ideal in low pressure situations and for higherwater production. These systems work whenother RO systems without pumps fail.

Provides five stage treatment with 50 GPD membrane, sediment pre-filter, carbon block pre-filter, GAC pre-filter, GAC post filter, ROPRO plastic storage tank, low-lead chromefaucet, 3/8" tubing from tank to faucet and genuine John Guest® fittings.

Systems for 115 and 220 voltage come with topquality, genuine Aquatec® booster pumps.

FMRO4G-ERP (with non electric pump)

Systems come fully assembled and include a non-electrical Aquatec® permeate pump, which is designed to reduce back pressure and increase water making capacity.

Four stage FMRO4G-ERP systems include pre-filter for sediment; carbon block pre-filter and GACpre-filter for odor, taste and chlorine reduction;50 GPD membrane; low-lead chrome faucet;plastic ROPRO storage tank; 1/4" tubing for feed water; 3/8" tubing for tank to faucet; saddlevalves, and genuine John Guest® fittings.

FMRO5-150G Booster pump purchased separately (if required).

Systems come with frame (suitable for wall mounting) three sumps; 20"pre-filter cartridge for sediment; two 20" carbon block cartridges for chlorine, taste and odor reduction; two 75 GPD membrane and membranehousings; automatic shut off valve and 3/8" fittings. Options are additionaland they are application specific.

Options Part number Description

CDP-8800 Aquatec® booster pump (115v; 3/8" fittings)TACS-114-48 Transformer for pump (2 amp)See catalog Pressure tank for storage (specify size)SVBV-38 Saddle valve for 3/8" tubing for feedSC500B38 Saddle valve for 3/8" tubing for drainFMPE-38 Tubing, 3/8" (specify length and color)

Spare partsW-1812-75 Watts® brand, 75 GPD membrane (req. 2)FPMB5-20 Flow-Pro® melt blown cartridge (5 mic.)MAXETW-20 C-MAX® carbon block cartridge (5 mic.)AICRO In-line GAC post filter

Models With Booster Pump(Used in low pressure situations and for greater water production).

Wet tested for quality assurance!

Prior to shipment each reverse osmosis system is wet tested forquality assurance. During this procedure, we check for leaks,make sure fittings are secure and determine if the automaticshut-off valve is functioning properly.

Feed water parametersMaximum TDS 2,000 PPMIron, maximum 0.3 ppmHardness (less than) 15 gpgHydrogen Sulfide ZeroManganese (less than) 0.05 ppmTurbidity (less than) 1 NTUPressure (minimum w/o pump) 30 psiPressure, maximum 100 psipH 3 - 11

Note: Pretreatment suggested if conditions exceed parameters.

MaintenanceRO systems are designed to provide excellent performance on a continual basis.Membrane and cartridge replacement guidelines are shown below:

Pre-filtersReplace every 6 months (heavy service)Replace annually (light service).

MembranesChange out is based on TDS rejection tests.Replacement is typically every 2-3 years.

SpecificationsProduction:

FMRO4 50 GPDFMRO5 50 GPDFMRO5-150G 150 GPD

Faucets Low-lead*Membranes Thin filmStorage tank capacity 2.6 gallons

*Meets State of California's lead-free requirements.

Limited warrantyRO systems are manufactured to the highest industry standards, and only top quality components are used. Prior to installation, systems should be thoroughly inspected, and defects should be immediately reported.

Once systems have been installed, RO systems are backed by a limited warranty, covering materials and workmanship for one year from date of purchase. Under this limited warranty, any parts or components deemed to be defective will be replaced no charge.

Spare Parts for Residential RO Systems

TUBING

TO TANK

SHUT-OFFVALVE FORTANK

TANK

POST CARBON FILTER

TO FAUCET

MEMBRANE HOUSING

AUTOMATICSHUT-OFF VALVE

CARBON ORSEDIMRENTPRE-FILTER

THIRD HOUSINGFOR FMRO5MODELS WITHCARBON ORSPECIALITYCARTRIDGE

SEDIMENTPRE-FILTER

SADDLE VALVEFOR DRAIN

SADDLE VALVEFOR SUPPLY

FLOW

CLIPS

CLIPS

BRACKET

FILTERHOUSINGS

Note: Please refer to separate parts list for model FMRO5-MT, included with unit and installation instructions.

Part Number RO Model Number Description No. NeededFH4200WW14 All Filter housing 2FM-30AW FMRO4J, FMRO4G Bracket, dual pump 1FM-60AW FMRO5J, FMRO5G Bracket, triple pump 1EH2501W All Membrane housing 1ROPRO4-W All Storage tank, 4 gals. 1WDF-103LA All Faucet, long-reach, lead-free 1S3000W FMRO4J, FMRO5J Automatic shut-off valve 1S3000HCW FMRO4G, FMRO5G, FMRO5GP Automatic shut-off valve 1SC500B14 FMRO4J, FMRO5J Drain Clamp 1C256JF FMRO4J, FMRO5J Check valve assembly 1FR-150-256JF FMRO4J, FMRO5J Flow restrictor assembly 140-4-2-N-O FMRO4J, FMRO5J Jaco® male elbow, 1/4” x 1/8” 140-4-4-N-O FMRO4J, FMRO5J Jaco® elbow, 1/4” x 1/4” 210-4-4-N-O FMRO4J, FMRO5J Jaco® male connector, 1/4” x 1/4” NPT 160-4-4-N-O FMRO4J, FMRO5J Jaco® tee, 1/4” 1NP1415W FMRO4J, FMRO5J Hex nipple, 1/4” x 1-1/2” NPT 1CI480821W FMRO4G, FMRO5G, FMRO5GP John Guest® elbow, 1/4” x 1/8” 1CI480822W FMRO4G, FMRO5G, FMRO5GP John Guest® elbow, 1/4” x 1/4” 3CI010822W FMRO4G, FMRO5G, FMRO5GP John Guest® connector, 1/4” x 1/4” NPT 2CI010821W FMRO4G, FMRO5G, FMRO5GP John Guest® connector, 1/4” x 1/8” NPT 4CI0208W FMRO4G, FMRO5G, FMRO5GP John Guest® union tee 1CI050822W FMRO4G, FMRO5G, FMRO5GP John Guest® stem adapter, 1/4” x 1/4” 1CI3212U7S FMRO4G, FMRO5G, FMRO5GP John Guest® faucet connector 1C220JG-ST FMRO4G, FMRO5G, FMRO5GP Check valve assembly 1FR-125-220JG FMRO4G, FMRO5G, FMRO5GP Flow restrictor assembly 1FPMB5-978 All Pre-filter, sediment 1MAXETW-975 All Pre-filter, carbon 1GAC-10N FMRO5G, FMRO5GP, FMRO5J Pre-filter, GAC 1AICRO All Post-filter, carbon 1W-1812-50 All Membrane, 50 GPD capacity 1INS14 FMRO4J, FMRO5J Tube insert 14MS1034 All Mounting screw, #10 x 3/4” 10MS0812 All Mounting screw, #8 x 1/2 1

© 2005 Printed in U.S.A.

Authorized dealer

Commercial RO models availableWe also offer a full line of reverse osmosis systems for commercialapplications. Commercial models are fully loaded with top qualitycomponents and include all options, which are necessary for a successful installation. Standard features include stainless steelmembrane housings, electronic controls with TDS monitors, flowmeters, pressure gauges, low pressure shut-off, with automaticrestart, starter motor boxes and recycle lines, on select models.All systems are factory tested and sterilized, prior to shipment.

Model Number GPD Membrane Recycle VoltageSize

RO300G-FL 300 2.5" x 21" Yes 110

RO500G-FL 500 2.5" x 21" No 110

RO1000G-FL 1000 4" x 21" Yes 110

RO1800G-FL 1800 4" x 40" Yes 110

RO3600G-FL 3600 4" x 40" Yes 230

RO5400G-FL 5400 4" x 40" No 230

RO7200G-FL 7200 4" x 40" Yes 230

RO10800G-FL 10,800 4" x 40" Yes 230

RO15000-W 15,000 4" x 40" Yes 230

RO-22500-W 22,500 4" x 40" Yes 230