getinge 88 turbo superior cleaning and …...cleaning, thermal disinfection and drying. but this...
TRANSCRIPT
Always with you
GETINGE 88 TURBOSUPERIOR CLEANING AND DISINFECTION IN HALF THE TIME
2 | Getinge 88 Turbo
SHORTENED CYCLES – HIGHER THROUGHPUT
There is a simple reason why Getinge is the world leader in sterilization and disinfection: we
know our customers’ everyday reality. And when we develop products, our focus is on your
needs.
Innovative solutions.
This approach, highly appreciated by our customers, often leads us into new territory, e.g.
when we developed the new Getinge 88 Turbo washer-disinfector. Here, the question ”How
can we further reduce our customers’ total costs?” led us to a unique concept with innova-
tive technology and several new solutions.
Getinge 88 Turbo | 3
The whole job in half the time
Like all our washer-disinfectors, the Getinge 88 Turbo ensures superior
cleaning, thermal disinfection and drying. But this machine does it much
faster, without affecting the wash result. Process times can be improved
by 40 % due to the only washer disinfector on the market that has a
multi-task capability.
The benefits are obvious. Higher throughput. Shorter turnaround times.
Fewer machines needed.
All these benefits will favorably impact your bottom line!
4
4 | Getinge 88 Turbo
THE FASTEST WASHER-DISINFECTOR
Superior cleaning and disinfection
Quality and conformance is never compro-
mised. The absolutely first-rate cleaning and
disinfection performance of the Getinge 88
Turbo has been verified in various tests and is
well documented. Naturally the product con-
forms to all relevant norms and standards,
starting with ISO15883-1 and ISO15883-2.
Excellent load capacity
The carts used with the Getinge 88 Turbo al-
low for flexibility and can be configured to your
needs. The Getinge 88 Turbo can be equipped
with wash carts with up to five levels, loading
15 DIN trays.
Easy to operate
The new version of our PACS 350 control sys-
tem is very user-friendly. Program settings can
be changed directly on the operator panel and
are regulated by an access code.
Easy-to-use
operating panel
Easy-to-clean
spray arms
Pull-out electrical
cabinet makes it
easy to access
components
Preventive
maintenance
alarm
The Getinge 88 Turbo is unique in terms of its ability to clean,
disinfect and dry in shorter periods of time. But it saves more
than time – it also saves energy and water.
5
Getinge 88 Turbo | 5
Complete process verification
Obviously, the Getinge 88 Turbo monitors
and records all cycle performance data.
There are three ports for direct communica-
tion, e.g. with a printer, scanner or the T-
DOC documentation system. A built-in bar-
code scanner and printer are available as
options.
Unique multi-tasking ability
The Getinge 88 Turbo is the only washer-disin-
fector offered in the market today that multi-
tasks. By continuously preparing for the sub-
sequent phase, the Getinge 88 Turbo eliminates
unnecessary “waiting times” during the pro-
cessing cycle.
Easy service access
The pull-out electrical cabinet makes it easy to
access components. The self-diagnostics and
preventive maintenance alarms also facilitate
service and maintenance.
Automatic glass
doors – for visual
control of
processes
Patents
pending for the
new innovative
technical
solutions
Self-cleaning
fine filter
6 | Getinge 88 Turbo
Step 1 Pre-rinse
The chamber is filled with cold water from the prefilled
process tank in 15 seconds via a large quick-opening
membrane valve. The speed-controlled circulation pump
is soft-started and runs at full speed for superior cleaning
results. The water goes via the spray manifold with water
heater into the two spray arms in the top and bottom and
into the spray arms of the wash carts.
The chamber is drained in 15 seconds via another large
quick-opening membrane valve in the conical bottom. The
water is then rapidly drained into a drain tank, from where
it is pumped to the building’s wastewater system.
Step 2 Wash
Cold or hot water from the prefilled process tank is
“dumped” into the chamber at the same time as the drain
tank is being emptied. The speed-controlled circulation
pump is soft-started and runs at full speed for superior
cleaning results.
Cleaning continues until the wash solution has operated
at the set temperature for the programmed time. The
chamber is then drained in the same way as in Step 1.
It is not what you see but what you don’t see – that is the secret. The washing process is the same as
in other Getinge washer-disinfectors – no added harsh chemicals, no hocus-pocus. But the Getinge 88
Turbo also features dramatic reductions in filling and draining times, in combination with the new and
innovative high-efficiency drying. Here is how simple it all works:
WHAT’S THE SECRET?THE MULTI-TASKING GETINGE 88 TURBO!
Getinge 88 Turbo | 7
Step 3: Rinsing / Final Rinsing / Disinfection
For the rinse phases, hot water from the pre-filled process
tank is “dumped” into the chamber at the same time as
the drain tank is being emptied. The speed-controlled
circulation pump runs at half speed thus reducing the
water consumption by up to 20 %.
In the disinfection phase, fresh 90°C water from the
booster tank (pumped up to the process tank during
the previous phase) is “dumped” into the chamber. The
rinse/disinfection temperature and duration can be set to
comply with all known norms. The chamber is drained as
described before.
Step 4: Drying
Fresh ambient air is preheated by the exhaust air in the
air-to-air heat exchanger before being electrically heated to
the drying temperature. The heated air is then transported
in stainless steel pipes to the water manifold pipe and then
into all spray arms.
This concept assures up to 40 % shorter drying times
thanks to very turbulent and efficient drying conditions in
the entire chamber.
The system is also available with an optional drying
sensor to abort the drying process when the preset
outgoing air humidity has been reached. This means
even shorter drying times when processing partial loads,
delicate instruments or utensils.
8 | Getinge 88 Turbo
ECONOMICAL AND ENvIRONMENTAL CHOICE
Reduced water consumption
Since the Getinge 88 Turbo runs the circulation pump
during rinse phase at half speed, the water consumption
is kept to a minimum.
No harsh chemicals
Thanks to Getinge’s unique technology, fast,
uncompromising cleaning and only thermal disinfection
results are achieved entirely without the use of harsh
chemicals – another important factor in reducing
environmental impact!
Unique energy-saving drying unit
The drying unit features a powerful heat exchanger that
enables faster drying while using less power. Drying air is
dispersed evenly throughout the load via all of the spray
arms and creates turbulent effective drying conditions.
Automatic drying sensor
The optional drying sensor measures the relative humidity
at the drying air and determines the time needed for
goods to dry and adjust the process accordingly. This
can cut the process time even more, while also lowering
energy consumption.
Our fastest washer-disinfector ever lets you run a cycle in half the time, without harsh chemicals and
with minimal media consumption! So you’ll need fewer machines, you’ll cut your costs – and your
environmental impact will be less!
Getinge 88 Turbo | 9
AS AUTOMATED AS YOU LIKE
Automatic loaders/unloaders
Reduction in manual activities allows the staff to perform
other tasks as loading and unloading of goods is done
automatically. The wash carts are equipped with sensors
that initiate the correct wash cycle for each cart. Getinge
automatic loaders and unloaders improve productivity
levels and ensure good compliance.
Getinge AGS (Air Glide System)
The principle of the Getinge AGS is “no waiting”. Simple
to operate, wash carts are loaded automatically into the
washer-disinfector in the order of their arrival, as the wash
carts queue up at one single point. Correct process
selection is ensured. Improved efficiency is guaranteed
as the system handles all loading, program selection and
unloading automatically.
Studies show that a large portion of the total cost of a washer-disinfector is accounted for by staff
costs. Automatic loading and unloading systems reduce staff intervention allowing for optimal
productivity and efficiency.
10 | Getinge 88 Turbo
ACCESSORIES FOR ANY NEED
Getinge offers a wide range of loading
equipment and accessories so you can
customize the Getinge 88 Turbo to fit your exact
needs. Whatever kind of goods you wish to
process, we have a solution.
To the right, you will see a selection of what is
available. For the complete range, please refer to
our Loading Equipment Catalogue.
For more information, please refer to the separate Loading
Equipment Catalogue.
How to use the accessories
To help you get started to work with the accessories,
we have created the Getinge Loading Handbook, which
shows how to work with and load the most commonly
used instrument sets efficiently.
Loading equipment forgetinge 8666/8668 WaSHer-diSinfeCtorS and getinge Cm320 indeX WaSHer-diSinfeCtor
loading handbook for common hospital instrument sets in a washer-disinfector
Getinge 88 Turbo | 11
Wash carts
Wash carts are available in a number of different versions:
flexible OP carts as well as carts for MIS accessories, con-
tainers, AN goods etc.
Cart for 1/2 STU containersCapacity: 6 DIN containers with lids (600x300x150 mm)
MIS-wash cart
OP-cart 4 levels mounted with U-ramp and MIS-rampConsumable products
Transport trolleys and storage tables
Transport trolleys or height-adjustable trolleys for manual
loading/unloading are also available, as well as storage
tables and return conveyors.
COMPLETE SOLUTIONS FOR INFECTION CONTROLGetinge is the world’s leading provider of solutions for effective
cleaning, disinfection and sterilization in the healthcare and life
science sectors. We are dedicated to helping our customers
provide better care at a lower cost. We do this by offering
well thought through and customized solutions. This means
that we are with our customers all the way from architectural
planning and education to traceability and support – with
complete solutions, long-term commitment and global presence.
Getinge – Always with you.
GETINGE GROUP is a leading global provider of products and systems that
contribute to quality enhancement and cost efficiency within healthcare and life
sciences. We operate under the three brands of ArjoHuntleigh, GETINGE and
MAQUET. ArjoHuntleigh focuses on patient mobility and wound management
solutions. GETINGE provides solutions for infection control within healthcare and
contamination prevention within life sciences. MAQUET specializes in solutions,
therapies and products for surgical interventions and intensive care.
1947
US
201
0.08
· G
öteb
orgs
tryc
kerie
t ·
We
rese
rve
the
right
to
mak
e te
chni
cal a
nd c
onst
ruct
ion
chan
ges.
Getinge USA Inc. 1777 East Henrietta Road, RochesterNew York 14623-3133 USA Phone: (800) 475-9040Fax: (585) 272-5116 Email: [email protected] www.getingeusa.com
www.getinge.com