getrang mt 82 ranger 3.2
TRANSCRIPT
![Page 1: Getrang MT 82 Ranger 3.2](https://reader031.vdocument.in/reader031/viewer/2022021401/55cf9a13550346d033a05a73/html5/thumbnails/1.jpg)
SECTION 308-03A Manual Transaxle/Transmission — MT82 Getrag 6-Speed
CONTENTS PAGE
GENERAL PROCEDURESTransmission Draining and Filling .................................................................................................................................... 308-03A-2
308-03A-i Manual Transaxle/Transmission — MT82 Getrag 6-Speed 308-03A-i
2011 Mustang, 2/2011
![Page 2: Getrang MT 82 Ranger 3.2](https://reader031.vdocument.in/reader031/viewer/2022021401/55cf9a13550346d033a05a73/html5/thumbnails/2.jpg)
GENERAL PROCEDURESTransmission Draining and Filling
Material
Item Specification
Motorcraft® Full Synthetic Manual Transmission FluidXT-M5-QS
WSD-M2C200-C
Item Part Number Description
1 W701065 Drain plug
2 W701065 Fill plug
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.
2. Remove the drain plug and drain the fluid.
3. Install the drain plug.
• Tighten to 35 Nm (26 lb-ft).
4. NOTE: Prior to removal, clean the area around the fill plug.
308-03A-2 Manual Transaxle/Transmission — MT82 Getrag 6-Speed 308-03A-2
2011 Mustang, 2/2011
![Page 3: Getrang MT 82 Ranger 3.2](https://reader031.vdocument.in/reader031/viewer/2022021401/55cf9a13550346d033a05a73/html5/thumbnails/3.jpg)
Remove the fill plug.
5. NOTICE: The use of any other transmission fluid than specified can result in the transmission failing to operate in a normal manner or transmissionfailure.
NOTE: Do not overfill the transmission. This will cause transmission fluid to be forced out of the case.
Using a suitable oil suction gun, fill the transmission with the recommended fluid.
• Transmission capacity is 2.6L (2.7 qt).
6. Install the fill plug.
• Tighten to 35 Nm (26 lb-ft).
308-03A-3 Manual Transaxle/Transmission — MT82 Getrag 6-Speed 308-03A-3GENERAL PROCEDURES (Continued)
2011 Mustang, 2/2011