gireesh c joshi

Upload: gairy-joshi

Post on 06-Apr-2018

235 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/3/2019 GIREESH C JOSHI

    1/90

    A PROJECT REPORT

    ON

    Designing of Induction & Orientation for

    PARLE Biscuit Private Limited

    Under The Supervision Of:

    Mr. Shishir Shrivastava(HR Executive, PBPL)

    Mr. Saurabh Rathi (HR Asst. officer, PBPL)

    Internal Project Guide Submitted By:

    Prof. YUVA RAJA GIREESH CHANDRA JOSHI

    MBA III Sem.

    In partial fulfillment of the requirement for the award of the Degree of Master of Business

    Administration

  • 8/3/2019 GIREESH C JOSHI

    2/90

    EXCEL BUSINESS ACADEMYSTUDENT DECLARATION

    I hereby declare that the project report entitled

    Designing of Induction & Orientation for PARLE Biscuit Private Limited

    (PBPL)

    Submitted in partial fulfillment of the requirement for the degree of

    MASTERS OF BUSINESS ADMINISTRATION

    Is our original work and not submitted for the award of any degree, diploma,

    fellowship or other similar title or prizes.

  • 8/3/2019 GIREESH C JOSHI

    3/90

    **GIREESH CHANDRA JOSHI[EXCEL BUSINESS ACADEMY, BANGALORE]

  • 8/3/2019 GIREESH C JOSHI

    4/90

    ACKNOWLEDGEMENT

    INTERDEPENDENCY IS A HIGHER VALUE THAN INDEPENDENCY

    A special thanks to GOD for giving me confidence and strength to initiate this venture.

    Exchange of ideas generated new obiects to work in a better way. whenever a person is helped &cooperated by others, his heart is bound to pay gratitude & obligation to them.

    I deeply extend my gratitude & appreciation to

    Mr. Shishir Shrivastava(HR Executive, PBPL)

    Mr. Saurabh Rathi (HR Asst. officer, PBPL)for their encouragement & valuable suggestion.

    I also grateful to all members of HR department of PBPL(Rudrapur) for their constant guidance during

    my entire project work.

    This is my pleasure to thanks Prof.Mr.Yuva Raja (Principle of Excel Business Academy , Bangalore) for

    being a source of inspiration, help and co-operation.

    And again I would also like to extend my thanks to my faculty Prof. Mr. Yuva Raja(Internal Guide) for

    his support and guidance.

    Last but not the least, my thanks are due to my Family for their support during training

  • 8/3/2019 GIREESH C JOSHI

    5/90

    GIREESH CHANDRA JOSHI

    CCHHAAPPTTEERR AARRRRAANNGGEEMMEENNTT SSHHEEEETT

    1. CHAPTER - 1

    1.1- Abstract

    About Study

  • 8/3/2019 GIREESH C JOSHI

    6/90

    1. Objective

    2. Scope

    3. Period

    4. Limitations

    1.2- Preface

    1. CHAPTER 2

    2.1- Industry profile

    2.2- Company/Organizational profile

    2. CHAPTER 3

    3.1- About PBPL

    1. Organizations Structure

    2. Personnel & Administration

    Department

    3. Personnel Management &

    Industrial Relations

    4. Human Resource Development5. Performance Appraisal

    6. Recruitment

    7. Training & Development

    8. Welfare activities

    3. CHAPTER - 4

    4.1 INDUCTION & ORIENTATION

    4. CHAPTER-5

  • 8/3/2019 GIREESH C JOSHI

    7/90

    5.1 DESIGNING OF INDUCTION AND ORIENTATION FOR PBPL

    1. Induction program for staff.

    2. Induction program for team mates.

    3. CHAPTER6

    6.1-Research Methodology

    1. Definition of Research

    2. Research Process

    3. Choice of subject

    4. Objective of research

    5. Type of research

    6. Research design

    7. Sample design

    8. Method of data collection

    9. Analysis tools

    4. CHAPTER-7

    7.1-Analysis

    7.2-Findings & observation

    7.2-Recommendation

    7.3-Suggestion

    7.4-Conclusion

  • 8/3/2019 GIREESH C JOSHI

    8/90

    7.5-Bibliography

  • 8/3/2019 GIREESH C JOSHI

    9/90

  • 8/3/2019 GIREESH C JOSHI

    10/90

    ABSTRACT

    ABOUT STUDY:-

    Objective of the study:-

    1. To find out the awareness level in employee regarding induction and orientation in organization.

    2. To find out the effectiveness of induction and orientation.

    3. To analyze the satisfaction level among the employees with regard to the induction and orientation

    programme in PBPL.

    4. To design a new induction and orientation programme for PBPL.

    Scope of the study:-

  • 8/3/2019 GIREESH C JOSHI

    11/90

    The Project designed can be suitable to every organization irrespective of nature, business.

    Period of the study:-

    The duration of the study is 2 Months.

    Limitation of the study:-

    The study has gone through the above mentioned limitations that took a form of obstacle in the study:-

    1. The time and support extended by the executives of PBPL were limited due to theircompany policy.

    2. I was not able to interact within the factory premises due to safety aspect.

    3. The sample size was large and may not be representing the populations characteristic.

    PREFACE

    As a part of the curriculum of my MBA III semester, I undergo my project in PARLE BISCUIT PRIVATE

    LIMITED (PBPL). There I was assigned the project title Designing of Induction & Orientation for PBPL

  • 8/3/2019 GIREESH C JOSHI

    12/90

    and its significance. My topic is concerned with the Induction & Orientation in PBPL and its awareness

    among employees through research done, which helped me to check whether Induction & Orientation

    in PBPL is appropriate or not.

    This project work provides me an ample opportunity to judge the companys Induction &

    Orientation of the firm. Through this project we can evaluate the Effectiveness of Induction &

    Orientation in an organization.

    I analyzed the responses taken through questionnaire filled up by employees. This study

    provides me an opportunity to analyze that how important is RIGHT Induction & Orientation for the

    employees and what impact it have on developing their interest in organization.

    Therefore, I have chosen this topic to evaluate that Induction & Orientation is actually

    necessary for the organization and that should be redesigned on timely basis for the developing the

    interest of new employees and if so then to what extent.

  • 8/3/2019 GIREESH C JOSHI

    13/90

  • 8/3/2019 GIREESH C JOSHI

    14/90

  • 8/3/2019 GIREESH C JOSHI

    15/90

    2.1INDUSTRY PROFILE

    ABOUT PARLE

    1. Parle Products has been India's largest manufacturer of biscuits and confectionery, for almost 80

    years. Makers of the world's largest selling biscuit, Parle-G, and a host of other very popular

    brands, the Parle name symbolizes quality, nutrition and great taste. With a reach spanning even

    the remotest villages of India , the company has definitely come a very long way since its

    inception.

    2. Many of the Parle products - biscuits or confectioneries, are market leaders in their category and

    have won acclaim at the Monde Selection, since 1971. With a 40% share of the total biscuit

    market and a 15% share of the total confectionary market in India , Parle has grown to become a

    multi-million dollar company. While to consumers it's a beacon of faith and trust, competitors

    look upon Parle as an example of marketing brilliance.

    HISTORY

    1. In 1929 a small company by the name of Parle products emerged in British dominatedIndia. The intent was to spread joy and cheer to children and adults alike, all over the

    country with its sweets and candies. The company knew that it wouldnt be an easy task,

    but they decided to take the brave step. A small factory was set up in the suburbs of

    Mumbai, to manufacture sweets and toffees. A decade later it was upgraded to

    manufacture biscuits as well. Since then, the Parle name has grown in all directions, won

    international fame and has been sweetening people's lives all over India and abroad.

    1. Apart from the factories in Mumbai and Bangalore Parle also has factories in

    Bahadurgarh in Haryana and Neemrana in Rajasthan, which are the largest biscuit and

    confectionery plants in the country. Additionally, Parle Products also has 7

    manufacturing units and 51 manufacturing units on contract.

  • 8/3/2019 GIREESH C JOSHI

    16/90

    PARLE QUALITY

    1. Hygiene is the precursor to every process at Parle. From husking the wheat and melting

    the sugar to delivering the final products to the supermarkets and store shelves

    nationwide, care is taken at every step to ensure the best product of long-lasting

    freshness. Every batch of biscuits and confectioneries are thoroughly checked by expert

    staff, using the most modern equipment hence ensuring the same perfect quality across

    the nation and abroad.

    1. Concentrating on consumer tastes and preferences, the Parle brand has grown from strength to

    strength ever since its inception. The factories at Bahadurgarh in Haryana and Neemrana in in

    Rajasthan, Pantnagar and Sitarganj in Uttarakhand which are the largest biscuit and

    confectionery plants in the country. Additionally, Parle Products also has 7 manufacturing units

    and 51 manufacturing units on contract.

    PARLE CORE VALUES

    An in-depth understanding of the Indian consumer psyche has helped Parle evolve a

    marketing philosophy that reflects the needs of the Indian masses. With products designed

    keeping both health and taste in mind, Parle appeals to both health conscious mothers and

    fun loving kids. The great tradition of taste and nutrition is consistent in every pack on the

    store shelves, even today. The value-for-money positioning allows people from all classes

    and age groups to enjoy Parle products to the fullest.

  • 8/3/2019 GIREESH C JOSHI

    17/90

    PARLE AWARDS

    1. Parle products have been shining with the golds and silvers consistently at the Monde Selection ever

    since they were first entered in 1971.

    2. Monde Selection is an international institute for assessing the quality of foods and is currently the

    oldest and most representative organization in the field of selecting quality foods worldwide.

    BOARD OF DIRECTORS:

    1. MR. ATUL K. SHAH2. MR. R.S. NEVATIA3. MR. BRAJESH K.TRIPATHI4. MR. S.N.VERMA

    AUDITORS:

    DELLOIT HARSHSKIN & SONS

    BANKER:

    UTIPUNJAB NATIONAL BANK

    CBOP

    MOTHER UNIT:ADDRESS

    PARLE PRODUCTS PVT. LTD.NORTH LEVEL CROSSING

    VILLE PARLE (EAST)

    MUMBAI

  • 8/3/2019 GIREESH C JOSHI

    18/90

    CORPORATE OFFICE:ADDRESS

    NIRLON HOUSE

    A.B.ROAD

    MUMBAI.

    MOTHER UNITS: -PLACE

    Mumbai, Nasik, Banglore, khaboli, Bahadurgarh (Haryana), Bhuj (Gujarat), Neemrana (rajas than),

    sitarganj, pantnagar.

    EMRGING TRENDS OF THE BRAND

    Since its inception in the 30s Parle biscuits have prided itself in offering quality products that are

    affordable to the common man. The marketing mix has evolved with the times..

    1. THE PRODUCT

    Parle biscuits have a range of variants in it product portfolio. the popular brand Parle- G, krackjack,

    Monaco, and its variants ( Zeera, onion and Methi ) are available in packets of various convenient

    sizes. New products like hide & seek are a foray into the premium segment.

    2. THE PRICING STRATEGY

    The biscuits major has not bothered to raise the price of its flagship brand "Parle- G" for the past 6 to

    8 years and has always tried to provide its offering at nearly 33% discount as compare to other

  • 8/3/2019 GIREESH C JOSHI

    19/90

    competitive brands.

    3. THE PROMOTION POLICY

    The consumer is the focus of all activities at Parle. Maximizing value to consumer and forging enduring

    customer relationships are the core endeavors at Parle. Parle-G " My Dream Come True "- was one its biggestpromotional ventures (2.5 crore) which gave contestants a chance to fulfill their dreams. Discounts, gift offer

    schemes are other popular promotional offerings.

    4. THE PLACE

    The well-entrenched distribution system (the company covers 12-15 lakh outlets across the country), with 39

    depots at strategy points all over the country. From the depots, the biscuits are sold to wholesalers and

    further to retailers.

    5. THE PACKAGING

    Biscuits have under gone a swift transformation. From the earlier waxed-paper packing,

    Parle's BOPP offering is not only stylish and enticing bit also increases the self life of the

    biscuits.

    BRANDS

    1. BISCUITS

    1. Parle - G

    2. Hide and Seek

    3. Krackjack

    4. Hide & Seek Milano5. Magix

    6. Digestive Marie

    7. Monaco

    8. Parle Marie

    9. Kreams

    10. Milk Shakti

    11. Parle 20-20 Cookies

  • 8/3/2019 GIREESH C JOSHI

    20/90

    12. Golden Arcs

    13. Nimkin

    14. Kreams Gold

    15. Chox

    16. Monaco Jeera

    17. Hide & Seek Bourbon

    2. CONFECTIONARIES

    1. Melody

    2. Kismi Gold

    3. Mango Bite

    4. Orange Candy

    5. Kaccha Mango Bite6. Xhale (NEW)

    7. Poppins

    8. 2 in 1 Eclair

    9. Kismi Toffee

    10. Golgappa

    11. Kisme Toffee Bar

    12. Melody Softee

    13. Mazelo

    14. Parle Lites

    3. SNACKS

    1. Musst Bites

    2. Jeffs

    3. Cheeslings

    4. Musst Stix & Musst Chips

  • 8/3/2019 GIREESH C JOSHI

    21/90

    5. Sixer

    6. Sixer Zeera

    7. Monaco Smart Chips

    Ingredients:

    1. Wheat Flour

    2. Sugar

    3. Edible Vegetable Oils

    4. Invert Syrup

    5. Skimmed Milk Powder

    6. Salt

    7. Leavening Agents

    8. Permitted Emulsifier,9. Flavour

    10. Dough Conditioners

    EXPORT-IMPORT

    1. The immense popularity of Parle products in India was always a challenge to our production capacity.

    Now, using more modern techniques for capacity expansion, we have begun spreading our wings and

    are going global.

    2. Parle biscuits and confectionaries are fast gaining acceptance in international markets, such as,

    Middle East, Africa, South East Asia and the more sophisticated economies like U.S.A., UK, Canada,

    Australia and New Zealand now relish Parle products.

    3. The Parle name symbolizes quality, health and great taste. And yet, we know that constantly

    innovating and catering to new tastes have built this reputation. This can be seen from the success of

    its new brands such as Hide & Seek, Mangobite etc.

    4. The Parle Biscuit brands, such as, Parle-G, Monaco, Krackjack, Marie Choice, Hide & Seek and

    confectionery brands, such as, Melody, Poppins, Rolacola, Mangobite enjoy a strong imagery and

    appeal amongst consumers across the world.

  • 8/3/2019 GIREESH C JOSHI

    22/90

    Which has resulted into Parle-G being the worlds largest selling biscuit .

    CORPORATE SOCIAL RESPONSIBILITY(CSR)

    1. As a part of Corporate Social Responsibility Policy Parle is keenly involved in the overall development

    of younger generation with focused endeavor to built New Face of India and spread happiness & joy

    all over.

    2. Parle Centre of Excellence as an institution is dedicated to enrich the lives of people through

    conducting various cultural programs across all region to facilitate the all round development of the

    children. Every year, Parle organises Saraswati Vandana in the state of West Bengal during the

    festival of Saraswati Puja, inviting schools from all across the state to participate. The event is one of

    much fanfare and celebration, keeping alive the culture and traditions of ages. Our involvement in

    cultural activities has seen the inception of Golu Galata in Tamil Nadu, held during Navratri. Its gives a

    platform to all the members of a household to showcase their creativity and being judged by

    immanent personalities. Thousands of families participate and celebrate the occasion on a grand

    scale.

  • 8/3/2019 GIREESH C JOSHI

    23/90

    2.2 UNIT PROFILE

    UNIT (PBPL-PANTNAGAR)PROFILE

    This unit is being started at 2004 with the production of Parle-G in different pack size. Today this unit is

    producing around 250 MT, out of which 220 MT is Parle-G & 30 MT is Orange cream biscuit. Around 850

    no.s ofemployees are working at this unit including 45 no.s of staff members.

    The production of Orange Creams is be started in the month of August-2007.

    This plant is be set-up at around 14 acre land. Greenery is very much focused & concerened here by the

    employees.

    COMPANY GOALS

  • 8/3/2019 GIREESH C JOSHI

    24/90

    1. Customer Focus

    a. Zero defect product.

    b. School visits.

    2. PQS Focus

    a. Reducing breakdowns , wastage.

    b. Training and development.

    c. Quality assurance.d. HACCP , 5-S, ISMS policies.

    DEPARTMENTS

    1. Purchase

    2. HR & Personnel

  • 8/3/2019 GIREESH C JOSHI

    25/90

    3. Finance & Accounts

    4. Quality Assurance

    5. Production

    6. Packaging

    7. Dispatch

    8. Stores

    9. School Department.

    The organization follows a flat structure with less hierarchal level. The head of the department reports

    to the general manager through direct communication. The working atmosphere is not stressful with

    enough work-flexibility given to staff & managers.

    The factory also has an auditorium & viewing gallery, which is used during the visit of school children

    & visitors.

  • 8/3/2019 GIREESH C JOSHI

    26/90

    SCHOOL DEPT.

    The main objective of these visits is to aware the students & visitors about the Parle hygiene & quality, and to

    promote the product of Parle.

  • 8/3/2019 GIREESH C JOSHI

    27/90

    PRODUCT MANUFACTURED AT PARLE

    PANTANAGAR

    Filled with the goodness of milk and wheat, Parle G is not just a treat for the

    taste buds, but a source of strength for both body and mind. Tear over a

    packet of Parle G to experience what has nourished Generations of Indianssince last sixty five years, making it trulyHindustan Ki Taakat.

    Ingredients:

    Wheat Flour, Sugar, Partially Hydrogenated Edible Vegetable Oils, Invert Syrup*,

    Leavening Agents [ 503 ( ii ), 500 ( ii ) ], Salt, Milk Solids, Emulsifiers[322 or 471 &

  • 8/3/2019 GIREESH C JOSHI

    28/90

    481 ( i ) ] and Dough Conditioners[ 223 ]. Contains Added Flavours (Artificial)* (d - Glucose, Levulose)

    Pack Sizes available: 88g & 44g

    Orange:

    Tickle your senses with Parle Orange Cream The tangy orange creambetween two scrumptious biscuits makes for a real treat.Age no bar!

    Ingredients:Wheat Flour, Sugar, Partially Hydrogenated Edible Vegetable Oils, Invert

    Syrup, Milk Solids, Salt, Leavening Agents [ 503 ( Ii ), 500 ( Ii ) ],

    Emulsifiers [ 322 or 471 & 481 ( i ) ] and Dough Conditioners [ 223 ].Contains Permitted Synthetic Food Colour [ 110 ] and Added Flavours (

    artificial ).

    Pack Sizes available:- 90 G

    \

  • 8/3/2019 GIREESH C JOSHI

    29/90

  • 8/3/2019 GIREESH C JOSHI

    30/90

    3.1 ORGANISATION STRUCTURE

    Unit head

    Depty Manager

    Executives

  • 8/3/2019 GIREESH C JOSHI

    31/90

    Officer Officer Officer Officer Officer

    Engineering Production Accounts IT HR & Personnel

    Assistance Assistance Assistance Assistance Assistance

    Officers Officers Officers Officers Officers

    Foreman

    School Coordinators

    Supervisor

    Trannies

    Operator Fitters

  • 8/3/2019 GIREESH C JOSHI

    32/90

    Assistance Operator/ Fitters

    Helper

    3.2 PERSONNEL MANAGEMENT & INDUSTRIALRELATION (PM & IR)

    Under personnel management & industrial relation the main activities are time office &

    industrial relation. The main works of the office is wage & salary administration. wage & salary if the

    factory employee casual worker or contract worker is calculated after considering various factor like

    shift of working, overtime, leave taken late corning, compensatory leave, loan &other statutory

    compliances as laid down in the wage &salary act.

    The attendance of an employee registered through card punching machine installed at the time

    office. The employees &workers are also given various allowances &these are added to their

    respective salary. Provision of employee state insurance & provident fund is also maintained & it is

    deducted from the employee's salary apart from contribution by company. Harmonious industrial

    relation is a must for every organization or company for its smooth functioning.

    At PBPL although there is no union but still grievances of employee has to redress and this work is under

    taken by industrial relation department. At PBPL, efforts are made to redress any grievance of the

    sectional level but if such a situation arise that it is not solved at the above level then IR department

    comes into picture &it tries to solve it as per laws rules & regulations.

  • 8/3/2019 GIREESH C JOSHI

    33/90

    3.3Human Resource Development

    At PBPL the main activities undertaken by HRD department are recruitment, performance

    appraisal Training and development, welfare activities, personal growth &promotion.

    3.4 Performance Appraisal

    Company considers its human resource as the most valuable resource for its growth &

    expansion. In line with this PBPL is committed to provide opportunity to its employees for their personal

    & professional development. To achieve this objective the company carries out performance appraisalof its employees so as to assess their weaknesses& strengths& to take measures accordingly like

    providing training or giving rewards or incentives.

    3.5 Recruitment

    Recruitment at PBPL is carried out in close co-ordination with the department requiring the

    personnel. It is a process where the qualification and other skills needed for the job are taken into

    account & based on this the incumbent is selected after proper screening &interviewing. He is then

    inducted &provided training if needed.

    3.6 Training and Development

    Training & development is an important aspect of HRDI, PBPL, believes in training and

    development of its employees so as to help them taken higher responsibilities & to prepare to meet the

    challenging business environment. The training need of the factory employees is assessed by his

    sectional &departmental head is consultation with the employee HRD ensures that suitable in-house or

    outstation training program are arranged for the employees.

  • 8/3/2019 GIREESH C JOSHI

    34/90

    3.7 Welfare Activities

    PBPL cares for its employees hence to ensure that every employee is happy &healthy it runs

    various welfare schemes like

    It also provides flat facility, transport facility, canteen facility etc to its employee. The welfare

    schemes help in ensuring a good and healthy relationship between the employees and the company.

    The employee feels like a part of the company &gives his 100% towards the growth of the company.

    3.8 Employee Records

    1. Personal RecordsPersonal records of employees are very important for the company. Any change or development in

    respect of educational and professional qualification, present and permanent address, family

    particulars, etc.shou1d is informed immediately to Personnel Department, by the employees so that his

    personal records can be update.

    2. Identity CardEvery employee is issued identity card which must be displayed by him, while on duty.

    Entry of employee in the premises is subject to his /her showing the identity card to the security

    staff. Employee should get a fresh identity card if the present one lost or damage. In case of lost of the

    identity card, written information must be given to Personnel Department immediately.

    3. DisciplineDiscipline is an important factor in running any business. Employees are expected to maintain discipline

    and adhere to the rules, regulations, system, and procedure etc., which are farmed and notified from

    time to time in this regard.

  • 8/3/2019 GIREESH C JOSHI

    35/90

    3.9 HR Activities

    H[1].R. Jobs.xls

  • 8/3/2019 GIREESH C JOSHI

    36/90

  • 8/3/2019 GIREESH C JOSHI

    37/90

  • 8/3/2019 GIREESH C JOSHI

    38/90

    4.1 Induction

    http://bp2.blogger.com/_dSiXv-Vk1XU/RyhpKD1AllI/AAAAAAAAACE/O6FrPKDno9I/s320/induction.jpg
  • 8/3/2019 GIREESH C JOSHI

    39/90

    Even volunteers who have been appointed to a particular role because of their skills will need an

    introduction to the organization and the activity. Induction can be given in a one-to-one or groupmeeting, and is best accompanied by a written introductory pack of materials, including copies of

    your mission statement and volunteering policy.

    There are three elements of induction:

    1. Cause induction - an introduction to the work of the organization. What its purpose is, perhaps

    explained in an annual report or introductory meeting for new volunteers.

    2. System induction - an introduction to the organizational systems, facilities and structure of the

    agency.

    3. Social induction - an introduction to staff, trustees and to other volunteers.

    INDUCTION & ORIENTATION

  • 8/3/2019 GIREESH C JOSHI

    40/90

    Pol icy Statement

    All new employees and transferring employees are provided with an appropriate introduction totheir employment to cover a basic understanding of the companys history, products, policies and

    procedures. The aim is for new employees to be integrated into the work environment as soon as

    possible. Induction process includes orientation programs, which have been designed for allemployees. Orientation is seen as an integral part of developing our culture in alignment with

    This We Believe and positioning as Best People, Best Place.

    Purpose

    The purpose o f th i s po l icy i s to ensure the success fu l implementa t ion o f a

    un i fo rm procedure fo r in t roduc ing new employees and he lp our newemployees fee l pa r t o f the o rgan iza t ion by p rov id ing in fo rmat ion and

    as s i s t ance a t t he t i me i t s needed .I t i s impor tan t tha t the induc t ion p rocess i s cons i s ten t to ensure tha t a l l

    new employees have the same induc t ion exper ience and rece ive the same

    messages . Induc t ion i f implemented e f fec t ive ly has the po ten t ia l to

    reduce t urnover , abs ent ee i s m and boos t mora l e .

    Exceptions

    There will be no exceptions to this policy.

    Scope

    This po l icy app l ie s to a l l employees .

  • 8/3/2019 GIREESH C JOSHI

    41/90

    Authority and Responsibil i ty

    The Human Resources Head has the authority and responsibility for ensuring that this policy is

    correctly implemented, is effective and properly maintained.

  • 8/3/2019 GIREESH C JOSHI

    42/90

  • 8/3/2019 GIREESH C JOSHI

    43/90

  • 8/3/2019 GIREESH C JOSHI

    44/90

    5.1 DESIGNING OF INDUCTION AND ORIENTATION FOR PBPL

    1. INDUCTION PROGRAM FOR STAFF

    CONTENTS

    1.Joining Formalities.

    2. Parle movie in auditorium.

    3. Parle history.

    4. Company goals.

    5. 30 good practices.

    6. PQS booklet.

    7. ISMS policies Booklet.

  • 8/3/2019 GIREESH C JOSHI

    45/90

    8. Departmental presentation.

    9. Meeting with HODs of every department.

    10. Feedback.

    11. Questionnaire.

    JOINING FORMALITIES

    1. Bio profile.

    2. Joining report.

    3. Bank form.4. ESI form (form2)

    5. PF form(form 12 revised)

    6. Nomination form (form6)

    ALONG WITH THESE DOCUMENT TO BE PROVIDED BY

    THE JOINER

    1. Proof of age (Birth certificate or school leaving certificate).

    2. Academic certificate.

    3. 6 photographs (passport size).4. Letter of release from the previous employer.

    5. Experience certificate.

    6. Salary slip.

    7. Provident fund details with previous employer

    1. P.F no.

    2. P.F Managed by trust/P.F Commissioner.

    3. Complete postal address of trust/ Commissioner.

    4. Medical fitness report.

    5. PAN No.

    6. Form 16 (Previous Employer)

    7. Identity Proof (Driving license , voter ID card , pan card etc.)

    8. Domicile Certificate .

    PARLE MOVIE

  • 8/3/2019 GIREESH C JOSHI

    46/90

    New joiner has to report at auditorium along with one employee from personnel department for Parle

    movie show.

    PARLE HISTORY (BRIEF)

    GROUP PROFILE

    A factory was set up in the suburbs of Mumbai city, to manufacture sweets and toffees. The year was

    1929

    A decade later , in 1929 Parle products began manufacturing biscuits. Parle-G( Parle glucose) and Parle

    Monaco were the first brands of biscuits to be introduced.

    Parle has nearly 1500 wholesalers, catering to 425000 retail outlets directly or indirectly. A two hundred

    strong dedicated field force services these wholesalers and retailers . Additionally, there are 31 depots

    and C & F agents supplying goods to the wide distribution network.

    Today, Parle enjoys a 65% share of the total Biscuit market and a 15% share of the total confectionary

    market, in India.

    The Parle biscuit brands, such as Parle-G, Monaco and Krackjack and confectionary Brands such as

    Melody, Poppins , MangoBite and Kismi enjoy a strong imagery and appeal amongst consumers.

    COMPANY (PBPL-PANTNAGAR)PROFILEWe have total 850 no.s of employees in our unit including 45 no.s of staff members PBPL

    Pantnagar was setup in May-2004 and started manufacturing of Parle-G.

    And started orange Creams in month ofAugust-2007.

    COMPANY GOALS1. Customer Focus

    a. Zero defect product.b. School visits.

    2.PQS Focusa.Reducing breakdowns , wastage.b. Training and development.c. Quality assurance.

    d. HACCP , 5-S, ISMS policies.

  • 8/3/2019 GIREESH C JOSHI

    47/90

    30-GOOD PRACTICES AT PBPL, PANTNAGAR

    1. Participate in all Hazards Analysis & Critical Control(HACCP)/ 5s related activities.

    2. Maintain discipline in the factory premises & Strictly follow all the rules & regulations.

    3. Do not wear wristwatch, ring, chain, pins all types of bracelets , threads , earrings,

    bangle ,anklets ,necklaces & jewelry any type of item in the production process area in

    order to meet HACCP based food safety system effective.

    4. Mens hair are short , properly trimmed & combed & womens hair, if long need to be in

    buns.

    5. Shoes must be worn daily.

    6. Beard should be shaved daily & mustaches kept properly must trimmed.

    7. Chewing tobacco / gutkha / smoking / chewing gum 7 related products should not be

    done in factory Participate premises.

    8. Use perfumes , aftershave and strong scented soaps should not be done.

    9. Shirt should be kept in the pant in factory premises.10. No sleeping during working hours.

    11. Minor cuts/ wounded & skin diseases should be cover with water resistant Band-Aid.

    12. While suffering from fever or cough & cold, do not attain duty.

    13. Splitting in the factory premises is not allowed.

    14. Food should be taken only in the canteen

    15. Hands are to be washed & disinfected at regularly intervals by hand sanitized in

    preparation & production area

    16. Bath & teeth brush should need to be one daily.

    17. Leave card should be filled & leave should be sanctioned before going leave.

    18. Serve the company obey all the lawful acts , directions & order of the company & of theperson placed in authority by the company manager.

    19. Use all the safety equipments in hardies jobs & follow up supervisors instructions.

    20. Make a peaceful environment in the organisations & do not make a lot of crowd at place

    or near a machine.

    21. Do not leave your machine or plant without informing your supervisor.

    22. Do not touch machine in running condition.

    23. Clean your workplace daily.

    24. Read the notice board daily.

    25. Keep the mobile in vibration mode in the premises.

    26. The corrections of attendance should be correct on the very next day.

    27. Regularly participate in the training programs , sports activities & other activities.

    28. Maintain your daily records properly.

    29. Give at least 5 suggestions for improving performance weekly.

    30. Trimmed nails without nail polish.

  • 8/3/2019 GIREESH C JOSHI

    48/90

    PQSPQS indicate Parle quality system and booklet attached will covers important literature needed for

    the knowledge of PQS.

    ISMS POLICIESISMS indicate information security management system and booklet attached will covers all

    important literature needed for the knowledge of ISMS policies.

    DEPARTMENTAL PRESENTATIONAll departments of PBPL Pantnagar has created a presentation on their particular department ,

    which can be beneficial in some aspects.The presentation will be shown at auditorium. Max 10 minutes of presentation is prepared by the

    department which can be shown as availability of the department person.

  • 8/3/2019 GIREESH C JOSHI

    49/90

    INDUCTION WITHHODS OF EVERY DEPARTMENT

    Ref: PBPL\PERS\09 Dated :

    Induction of Mr. , Miss , Mrs.

    We feel pleasure in announcing the induction of in Parle family

    as in department for our plant located at Pantnagar.

    has completed . Experience

    .

    We wish all success in his/her new assignment. We expect everyone to extend co-operation in

    discharging his/her functional responsibility effectively.

  • 8/3/2019 GIREESH C JOSHI

    50/90

    SCHEDULE:

    During this 1 d-day induction program you shall report to Mr. Manoj Dangwal in HRdepartment.

    Day 1 :- Completion of all documentations in files & induction with Parle group.

    Please do spare some time with to create better understanding about your

    functions/ department as per schedule given below.

    S.N

    o

    Name Departments Sign

    1. Mr. S andeep Pandey Manager Operation

    2. Mr. V.P.S Chauhan Finance & Accounts

    3. Mr. Devendra Tyagi Purchase

    4. Mr .Ganesh Bisht System

    5. Mr. Tarun Kapoor FSSC/ HACCP

    6. Miss. Rajshree 5S

    7. Mr. Sanjay Yadav Production

    8. Mr. Bhupendra Negi Electrical

    9. Mr. Sunil Shukla Engineering

    10. Mr. Rohit Gupta Quality

    11. Mr. Nirdosh Kumar Security

    12. Mr. Manikant Garg Safety

    13. Mr. Manoj Dangwal Personnel

    14. Mr. Shishir Shrivastava HR

    Thanking You

    (Manoj Dangwal)

    Member Parle Pariwar

  • 8/3/2019 GIREESH C JOSHI

    51/90

    Induction Program For

    We feel pleasure in announcing the induction of In Parlefamily as a for our plant located at Pantnagar w.e.f.

    Date Department Topics Trainer

    sign

    Trainee

    sign

    Remarks

  • 8/3/2019 GIREESH C JOSHI

    52/90

    Employee Sign Personal officer

    INDUCTION FEEDBACK

    1. What you learn during the induction program?

    2. Your opinion for improvement in our induction program?

    3. With whom you like the induction program and why?

    4. Are you satisfied with induction program or not? Give reason.

    1. Satisfied

    2. Fully Satisfied

    3. Not satisfied

    4. Whether you find the induction program healthy or like to suggest any change in this

    induction program?

  • 8/3/2019 GIREESH C JOSHI

    53/90

    QUESSTIONAIR

    Prepare from different department

    1. Accounts.

    2. HR/Personnel.

    3. Purchase.

    4. System

    5. PQS/HACCP.

    6. Electrical.

    7. Mechanical.

    8. Production.

    9. Quality.

    10.Security

  • 8/3/2019 GIREESH C JOSHI

    54/90

  • 8/3/2019 GIREESH C JOSHI

    55/90

    10. INDUCTION PROGRAM FOR TEAM MATES

    CONTENTS

    1. Joining Formalities.

    2. Parle Movie in auditorium.

    3. Parle history.

    4. Company goals.

    5. 30 good practices.

    6. Trainings.

    7. PQS booklet.

    8. ISMS policies booklet.

    9. HACCP.

    10. Quality.

    11. Safety & security.

    12. Facilities.

    FILLING UP OF CERTAIN FORMS

    1. Bio profile.

    2. Joining report.

    3. Bank form.

    4. ESI form(form 2).

    5. PF form(form 12 revised)

    6. Nomination form (form 6)

    ALONG WITH THESE DOCUMENTS TO BE PROVIDED BY THE

    JOINER

    1.Proof of age (Birth certificate or school leaving certificate).

    2. Academic certificate.

    3. 6 photographs (passport size).

    4. Letter of release from the previous employer.

  • 8/3/2019 GIREESH C JOSHI

    56/90

    5. Experience certificate.

    6. Salary slip.

    7. Provident fund details with previous employer

    a. P.F no.

    b. P.F Managed by trust/P.F Commissioner.

    c. Complete postal address of trust/ Commissioner.

    8.Medical fitness report.9.PAN No.

    10. Form 16 (Previous Employer)

    11. Identity Proof (Driving license , voter ID card , pan card etc.)

    12. Domicile Certificate .

    PARLE MOVIE

    New joiner has to report at auditorium along with one employee from personnel department for Parle

    movie show.

    PARLE HISTORY (BRIEF)

    GROUP PROFILE

    A factory was set up in the suburbs of Mumbai city, to manufacture sweets and toffees. The year was

    1929

    A decade later , in 1929 Parle products began manufacturing biscuits. Parle-G( Parle glucose) and Parle

    Monaco were the first brands of biscuits to be introduced.

    Parle has nearly 1500 wholesalers, catering to 425000 retail outlets directly or indirectly. A two hundred

    strong dedicated field force services these wholesalers and retailers . Additionally, there are 31 depots

    and C & F agents supplying goods to the wide distribution network.

  • 8/3/2019 GIREESH C JOSHI

    57/90

    Today, Parle enjoys a 65% share of the total Biscuit market and a 15% share of the total confectionary

    market, in India.

    The Parle biscuit brands, such as Parle-G, Monaco and Krackjack and confectionary Brands such as

    Melody, Poppins , MangoBite and Kismi enjoy a strong imagery and appeal amongst consumers.

    COMPANY (PBPL-PANTNAGAR) PROFILEWe have total 850 no. s of employees in our unit including 45 no.s of staff members .PBPL,

    Pantnagar was setup in May-2005 and started manufacturing of Parle-G.And started orange Creams in month ofAugust - 2007.

    COMPANY GOALS

    1. Customer Focus

    a. Zero defect product.

    b. School visits.

    2. PQS Focus

    a. Reducing breakdowns , wastage.

    b. Training and development.c. Quality assurance.

    d. HACCP , 5-S, ISMS policies.

  • 8/3/2019 GIREESH C JOSHI

    58/90

    30-GOOD PRACTICES AT PBPL, PANTNAGAR1. Participate in all Hazards Analysis & Critical Control(HACCP)/ 5s related activities.

    2. Maintain discipline in the factory premises & Strictly follow all the rules & regulations.

    3. Do not wear wristwatch, ring, chain, pins all types of bracelets , threads , earrings,

    bangle ,anklets ,necklaces & jewelry any type of item in the production process area in

    order to meet HACCP based food safety system effective.

    4. Mens hair are short ,properly trimmed & combed & womens hair, if long need to be in

    buns.

    5. Shoes must be worn daily.

    6. Beard should be shaved daily & mustaches kept properly must trimmed.7. Chewing tobacco / gutkha / smoking / chewing gum 7 related products should not be

    done in factory premises.

    8. Use perfumes , aftershave and strong scented soaps should not be done.

    9. Shirt should be kept in the pant in factory premises.

    10. No sleeping during working hours.

    11. Minor cuts/ wounded & skin diseases should be cover with water resistant Band-Aid.

    12. While suffering from fever or cough & cold, do not attain duty.

    13. Splitting in the factory premises is not allowed.

    14. Food should be taken only in the canteen.

    15. Hands are to be washed & disinfected at regularly intervals by hand sanitized in

    preparation & production area.

    16. Bath & teeth brush should need to be one daily.

    17. Leave card should be filled & leave should be sanctioned before going leave.

    18. Serve the company obey all the lawful acts , directions & order of the company & of the

    person placed in authority by the company manager.

    19. Use all the safety equipments in hardies jobs & follow up supervisors instructions.

    20. Make a peaceful environment in the organisations & do not make a lot of crowd at place

    or near a machine.

    21. Do not leave your machine or plant without informing your supervisor.

    22. Do not touch machine in running condition.

    23. Clean your workplace daily.

    24. Read the notice board daily.

    25. Keep the mobile in vibration mode in the premises.

    26. The corrections of attendance should be correct on the very next day.

    27. Regularly participate in the training programs , sports activities & other activities.

  • 8/3/2019 GIREESH C JOSHI

    59/90

    28. Maintain your daily records properly.

    29. Give at least 5 suggestions for improving performance weekly.

    30. Trimmed nails without nail polish.

    ALL THE JOINERS ARE TO BE GIVEN TRAININGS ON FOLLOWINGACTIVITIES

    PQSPQS indicate Parle quality system and booklet attached will covers important literature needed forthe knowledge of PQS.

    ISMS POLICIESISMS indicate information security management system and booklet attached will covers all

    important literature needed for the knowledge of ISMS policies.

    SAFETY AND SECURITYEach Teammate is being taught about the importance of safety security while on workplace by the

    help of Presentation.

    FACILITIESBriefiedabout the facilities the company is giving to its employees. Such As

    1. Bus Facility(Timing and place).

    2. Uniform.

    3. Canteen.

    4. Dispensary

    5. Naturopathy Camp.

    6. Yoga Camp.

    7. Sports.

    1. Cricket.

    2. Volleyball.

    3. Badminton.

    4. Table Tennis.

    5. Prizes

    6. CSR Activities.

    7.KRA.8. Tours/Picnics.

  • 8/3/2019 GIREESH C JOSHI

    60/90

  • 8/3/2019 GIREESH C JOSHI

    61/90

  • 8/3/2019 GIREESH C JOSHI

    62/90

    6.1 RESEARH METHODOLOGY

    It is a way to systematically solve the research problem. In it we study various steps that are

    generally adopted by a researcher in studying his research problem along with the logic behind them. It

    is important for the researcher not only to understand the research methods and techniques but also

    the methodology.

    DEFINITION OF RESEARCH

    1. A systematic search for knowledge.

    2. Movement from known to unknown.

    3. Research in common refers to search for knowledge.

  • 8/3/2019 GIREESH C JOSHI

    63/90

    One can also define research as a Scientific and systematic research for

    pertinent information on specific topics.

    RESEARCH METHODOLOGY OPTED FOR PROJECT STUDY IN PBPL

    Research problem

    To identify the awareness of induction & orientation among employees in PBPL that

    reflects on the effectiveness

    RESEARCH PROCESS

  • 8/3/2019 GIREESH C JOSHI

    64/90

    Formulating Research Problem

    Extensive Literature Survey

    Developing Hypothesis

    Preparing Research Design

    Data Mining Sample Design

    Collecting the Data

    Execution of Project

    Analysis of Data

    Hypothesis & Interpretation

    Generalization & Interpretation

    Report Writing

  • 8/3/2019 GIREESH C JOSHI

    65/90

    1. CHOICE OF SUBJECT

    To identify the awareness of induction & orientation among employees in PBPL that reflects on

    the effectiveness

    2. OBJECTIVE OF RESEARCH

  • 8/3/2019 GIREESH C JOSHI

    66/90

    The Research Objective of the Project is to Design an Induction &

    Orientation for PBPL.

    The purpose of research is to discover answers to questions through an application of scientific

    procedure. The main aim of research is to find out the truth which is hidden and which has not been

    discovered as yet. Though each research study has its own specific purpose, we may think of research

    objectives as falling into a number of following broad categories

    1. To gain familiarity with a phenomenon or to achieve new insight in to it (studies with this object in

    view are termed as exploratory or formulative research studies).

    2. To portray accurately the characteristics of a particular individual, situation or a group (studies with

    this object in view are known as descriptive research studies).

    3. To determine the frequency with which something occurs or with which it is associated with

    something else (studies with this object in view are known as diagnostic research studies).

    4. To test a hypothesis of a causal relationship between variables (such studies are known as

    hypothesis- testing research studies).

  • 8/3/2019 GIREESH C JOSHI

    67/90

    5. TYPE OF RESEARCH

    Descriptive researchincludes survey and fact - finding enquiries of different kinds. Themajor purpose of descriptive research is description of the state of affair as it exists at

    present.

    Advantages of Survey Method

    1. Survey is conducted in case of descriptive research studies.

    2. Survey - type research studies usually have larger samples because the percentage of responses

    generally happens to be low, as low as 20 to 30 %, especially in mailed questionnaire studies.

    Thus, the survey method gathers data from a relatively large number of cases at a pat1icular

    time it is essentially cross - sectional.

    3. Survey is concerned with describing, recording, analyzing and interpreting conditions that eitherexist or existed. The researcher does not manipulate the variable or arrange for events to

    happen. Surveys are only concerned with conditions or relationships that exist, opinions that are

    held, processes that are going on, effects that are evident or trends that are developing. They are primarily concerned with the present but at times do consider past events and influences as

    they relate to current conditions. Thus in survey, variables that exist or have already occurred

    are selected and observed.

    4. Survey is usually appropriate in case of social and behavioral sciences.

    5. Survey is an example of field research.

    6. Survey may either be census or sample survey. They may also be classified as social surveys,

    economic surveys or public surveys.

    The Method of data collection happens to be either observation, or Interview or questionnaire.

  • 8/3/2019 GIREESH C JOSHI

    68/90

    Sample size of 30 is taken from the target division of Parle

    Biscuit Private Limited (PBPL)

    7. SAMPING DESIGN

    Non Probability sampling

    Non - probability sampling is also known by different names such as deliberate sample,

    purposive sampling and judgment sampling. In this type of sampling, items remain supreme.

    Non-Probabilistic Sampling procedure is adopted for

    the Project

  • 8/3/2019 GIREESH C JOSHI

    69/90

    IF YOU HAVE PLANNED WELL, HALF OF YOUR WORK HAS BEEN DONE

    QUESTIONNAIRE

    1. Are you aware about the induction & orientation in an organisation?

    1. Yes

    2. No

    2. Induction is to introduce a new employee with:-

    1. Job related task

    2. Organisation

    3. Both of them

    3. Orientation is to orient the employee with his job/work:-

    1. Yes

    2. No

    3. Cant say

    4. Do you think that Induction & Orientation in Parle Biscuit PrivateLimited (PBPL):-

    (Choose the most appropriate one)

  • 8/3/2019 GIREESH C JOSHI

    70/90

    1.Reduce employee turnover

    2. Boost morale

    3. Familiarize with organizations culture

    4. All of them

    5. None of them

    5.Do you think thatInduction & Orientation has any significance in developing the interest of

    an employee in an organisation..?

    1. Yes

    2. No

    3. Cant say

    6.How would you rate the Induction & Orientation in Parle Biscuit PrivateLimited (PBPL):-

    1. Excellent

    2. Good

    3. Average

    4. Poor

    7.Do you want Human Resource (HR) department to design a new Induction & OrientationParle Biscuit PrivateLimited (PBPL)..?

    1. Yes2. No3. No comments

    8.Induction & Orientation is mere a wastage of resources in an organization.

  • 8/3/2019 GIREESH C JOSHI

    71/90

    1. Agree

    2. Neither agree nor disagree

    3. Strongly disagree

    4. Disagree

    9.Do you want some improvement in Induction & Orientation programme conducted in Parle

    Biscuit Private Limited (PBPL)..?

    1. Yes

    2. No

    3. No comments

    10. What suggestions/changes would you recommend to design a new Induction &Orientation programme in Parle Biscuit Private Limited (PBPL)..?

    NAME _________________________

    DESIGNATION _________________________

    DEPARTMENT ________________________

    DATE _________________________

    Thanking You

    With regards

    FEEDBACK HELPS US TO IMPROVE & REMEMBER CONTINOUS

    IMPROVEMENT IS THE KEY TO SUCCESS

    11. METODS OF DATA COLLECTION

    Data is collected from Primary sources.

  • 8/3/2019 GIREESH C JOSHI

    72/90

    Primary data can be collected either through experiment or through survey. If the researcher

    conducts an experiment, he observes some quantitative measurements, or the data, with the help of

    which he examines the truth contained in his hypothesis, but in the case of survey, data can be collected

    by anyone or more of following ways

    1. By observation

    This method implies the collection of information way of investigator's own observation,

    without interviewing respondent. The information obtained related to what is currently happening

    or future intentions or attitudes of respondents. This method is no doubt an expensive method andthe information provided is very limited. Method is not suitable in inquiries where large samples are

    concerned.

    2. Through personal interview

    The investigator follows a rigid procedure and seeks answers to a set of pre-conceived questions

    through personal interviews.

    3. By mailing of questionnaires

    The researcher and the respondent do come in contact with each other Questionnaires are

    mailed to the respondents with a return. It is most widely used method in various economic and

    business surveys.

    4. Through schedules

    Under this method the enumerators are appointed and given training, they are provided with

    schedules containing relevant questionnaires. These enumerators go to respondent with these

    schedules. Data are collected by Filling up the schedules by enumerators on the basis of replies

    given by respondents.

  • 8/3/2019 GIREESH C JOSHI

    73/90

    5. DATA ANALYSIS TOOLS

    Questionnaire can either be in Structured or Unstructured form.

    Structured questionnaire in which there are definite, concrete and predetermined questions. The

    questions are presented with exactly that same wording and in the same order to all respondents.

    Type of structured questionnaire

    1. Open ended Open- ended questions allow respondents to answer in their own words and often

    reveal about how people think (i.e. of the type inviting free response).

    2. Closed ended Closed-ended questions specify all the possible answers that are easier tointerpret and tabulate (i.e. of the type 'yes' or 'no').

    3. Combination Combination-type of questionnaire is combination of both open ended and close

    ended questionnaire

    Combination of Open ended and close ended Questionnaire is chosen

    for the Project

  • 8/3/2019 GIREESH C JOSHI

    74/90

  • 8/3/2019 GIREESH C JOSHI

    75/90

  • 8/3/2019 GIREESH C JOSHI

    76/90

    7.1 DATA ANALYSIS

    Assumptions:-

    1. All employees surveyed are of level six and above till 12A, as per organizational hierarchy in

    PBPL.

    2. All employees surveyed have joined PBPL in the last 2year only.

    3. Same Questionnaire was given to 30 employees and only 15 responded respectively.

    4. Population size = 850

    Sample = 30

  • 8/3/2019 GIREESH C JOSHI

    77/90

    Sampling = Systematic

  • 8/3/2019 GIREESH C JOSHI

    78/90

    5. %age OF EMPLOYEES AWARE ABOUT INDUCTION & ORIENTATION IN PBPL:-

    Fig. (a)

    1. %age OF EMPLOYEES IN PBPL SAYS INDUCTION IS TO INTRODUCE A NEW EMPLOYEE WITH:-

    Fig. (b)

    YE

    S

    95

    %

    NO

    5%

  • 8/3/2019 GIREESH C JOSHI

    79/90

    2. %age OF EMPLOYEES IN PBPL SAYS ORIENTATION IS TO ORIENT THE

    EMPLOYEE WITH HIS JOB/WORK:-

    Fig. (c)

    15%

    60%

    25%

    Job related task

    Organization

    Both of them

    92%

    0% 8%

    YES

    NO

    Can't say

  • 8/3/2019 GIREESH C JOSHI

    80/90

    3. IMPACT OF INDUCTION & ORIENTATION PROGRAMME ON EMPLOYEES IN PBPL:-

    Fig. (d)

    4. INDUCTION & ORIENTATION HAS ANY SIGNIFICANCE IN DEVELOPING THE INTEREST OF A

    NEW EMPLOYEE IN AN ORGANISATION:-

    Fig. (e)

    70%

    5%0%

    25%

    0%0%

    Reduce employee

    turnover

    Boost morale

    Familiarise with

    organisation

    culture

    All of them

    None of them

  • 8/3/2019 GIREESH C JOSHI

    81/90

    5. %age OF EMPLOYEES IN PBPL FEELS INDUCTION & ORIENTATION IS MERE A WASTAGE OF

    RESOURCES IN AN ORGANISATION:-

    Fig. (f)

    0%

    10%

    20%

    30%

    40%

    50%

    60%

    70%

    80%

    90%

    100%

    YES NO CAN'T SAY

    Strongly

    disagree

    75%

    Agree

    0%

    Disagree8%

    Strongly

    agree

    0%

    Neither agree

    nor disagree

    17%

    Strongly agree

    Agree

    Neither agree nordisagree

    Strongly disagree

    Disagree

  • 8/3/2019 GIREESH C JOSHI

    82/90

    6. %age OF EMPLOYEES WANT IMPROVEMENT /CHANGES IN INDUCTION & ORIENTATION

    PROGRAMME OF PBPL:-

    Fig. (g)

    7. RATING OF INDUCTION & ORIENTATION PROGRAMME IN PBPL BY EMPOYEES:-

    Fig. (h)

    83%

    0%

    17%

    0%

    YES

    NO

    NO

    COMMENTS

    0%

    10%

    20%

    30%

    40%

    50%

    60%

    70%

    5% 25% 70% 0%

    Exce

    llentGood

    Aver

    agePoor

  • 8/3/2019 GIREESH C JOSHI

    83/90

    8. %age OF EMPLOYEES WANT HR DEPARTMENT IN PBPL TO DESIGN A NEW INDUCTION &

    ORIENTATION PROGRAMME FOR THEM:-

    Fig. (i)

    0%10%20%30%40%50%60%70%

    80%90%

    100%

    YES NO

    NOCOMMEN

    TS

  • 8/3/2019 GIREESH C JOSHI

    84/90

    7.2 MAJOR FINDINGS & (analysis):-

    (1)95% of employees are aware about the term Induction & Orientation programme in PBPL and

    5% are not.

    ANALYSIS:-

    From the fig. (a) it can be easily made clear that still 5% of the employees are not aware about the term

    Induction & Orientation that means major steps is to be taken by HR department to bring awareness

    rate upto 100%.

  • 8/3/2019 GIREESH C JOSHI

    85/90

    (2) 100% of employees in PBPL agree that Induction & Orientation has significance in developing

    the interest of a new employee in an organisation.

    ANALYSIS (under assumption):-

    From fig.(e) the contradictory thing that came in front of us is that the whole sample(12) do agree that

    I & Ohas vital importance in an organisation but then too still 5% are not aware of Induction &

    Orientation in PBPL that means in PBPL Induction& Orientation is conducted just for the formality

    sake.

    (3)25% of employees says that Induction & Orientation conducted by PBPL is good and 5% of them

    responded that I & O in PBPL is excellent.

    ANALYSIS:-

    From the fig. (f) It could be made very easily clear that still 70% of employees had rated Induction &

    Orientation conducted by PBPL on an AVERAGE basis that implements that HR department in PBPL

    need to work hard for I & O.

    (4) 92% of employees want HR department in PBPL to design a new Induction & Orientation

    programme for new employees and 83% of them want HR department to update i.e. improvement in

    I & O of PBPL.

    ANALYSIS:-

    From the fig. (7) & (9) the purpose of the project is reflected i.e. why this project is prepared?? The

    answer to the question is to design a new induction & orientation programme & its awareness in PBPL

    making questionnaire as a source filled by the sample (12) so to give an aid to the employees for the

    betterment of freshers that would be joining in future.

  • 8/3/2019 GIREESH C JOSHI

    86/90

    ONE CAN GROW BETTER WHEN HE GOES THROUGH FEEDBACK & ASSESSMENT

    7.3 RECOMMENDATION

    Management would remain only an imaginative projection with ideological discrepancy if certain steps

    are not taken which are stated as follows:-

    1. The Head of Departments (HODs) especially the head of the new employees departments

    should be interacting with the new employees during the induction & orientation in PBPL.

    1. Some write ups/manuals regarding the co.s rules & regulations, systems and philosophies,

    employees role in the organisation is to be given to each new employee.

    2. Points of pride of the company to be highlighted, (USP).

    3. Once in 5yr. (or so), there should be brief refresher induction programme.

    4. Follow up action on the feedback from the new employees after Induction / orientation

    programme.

    5. Usage of modern tools/techniques for induction & orientation programme.

    7.4 SUGESSTIONS

  • 8/3/2019 GIREESH C JOSHI

    87/90

    PRINCIPLES INTO ACTION

    -players.

    the necessary documentation.

    * Developing and making the orientation checklist available on the companys website.

    Confirmation of financing for the various orientation instruments.

    * Proper planning to cater different levels of employees.

    * To be scheduled within a week after an employee joins.

    7.5 CONCLUSION

    In this survey I havecollected the suggestion and problems from different departments of

    The target Employee of Parle Biscuit Private Limited(PBPL).

  • 8/3/2019 GIREESH C JOSHI

    88/90

    1. In Human Resource cell of Parle Biscuit Private Limited (PBPL) Induction & Orientation is not

    conducted exhaustively.

    2. The heads of every department (HODs) of Parle Biscuit Private Limited (PBPL) do not take

    dynamic involvement except HR department while Induction & Orientation to new employees.

    3. The deficiency is caused by a lack of support of every department rather than a lack of

    technique to result perfection.

    4. Every employee of PBPL is in favor of designing a new induction & orientation programme for

    freshers.

    5. PBPL lacks in modern tools & technique while conducting Induction & Orientation for new

    employees.

    6. There is a gap between Induction & Orientation and Awareness of employee.

    7. There are majority of employees who are not satisfied with the Induction & Orientation

    conducted in PBPL.

    Using questionnaire as a source the study has come to a conclusion that employees of PBPL are

    not satisfied with the Induction & Orientation programme conducted by the company. Therefore they

    want HR department to design a new induction & orientation programme so to boost morale and

    develop the interest of a new employee towards organisation. The Induction & Orientation conducted in

    PBPL are done just for the formality sake i.e. on an average basis as per surveyed and thus taking into

    account the valuable suggestions I had brought the project to successful completion.

    As this achievement has fallen in Parle Biscuit Private Limited bag the co-operative nature of the

    employees acted as a well-wisher for the project. Numbers of suggestions for designing new induction &

    orientation programme for PBPL were received.

  • 8/3/2019 GIREESH C JOSHI

    89/90

    7.5 BIBLIOGRAPHY

    Primary Data Source:-

    Data provided by PBPL

    Website Addresses

    www.google.com

    www. parlebiscuit private ltd.com

    Human Resource & Personnel

    Management

    K. Aswathappa

    Personnel Management

    C.B Mamoria

    S.V Gankar

    Research Methodology C. R.Kothari

    http://www.parle/http://www.parle/http://www.parle/
  • 8/3/2019 GIREESH C JOSHI

    90/90