girls hostel citd

8/6/2019 Girls Hostel Citd

1/74

SCHDEULE OF QUANTITIES

Name of work: : Vertical Extension (3rd floor) at Girls Hostel for CITD at Balanagar,Hyderabad.

ItemNo Description Quantity Unit Rate

1

10.00 cum 2637.40

2

1.50 cum 3579.10

3

18.00 cum 5201.50

4

10 00 4046 25

Providing and laying cement concrete in sunken flooring uptofloor five level excluding the cost of centring and shuttering,finishing 1:5:10 (1 cement :5 fine sand :10 graded stoneagreegate 20mm nominal size)

Providing and laying cement concrete in retaining walls,return walls, walls (any thickness) including attached pilasters,columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor

blocks, plain window sills, fillets etc.upto floor five levelexcluding the cost of centring, shuttering and finishing.2.1) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness),including attached pilasters, buttresses, plinth and stringcourses, fillets, columns, pillars, piers, abutments, posts andstruts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement3.1) 1:1 1/2 :3 (1 cement : 1 1/2 coarse sand : 3 graded stoneaggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspendedfloors, roofs having slope upto 15 landings, balconies,

shelves, chajjas, lintels, bands, plain window sills, staircasesand spiral stair cases upto floor five level excluding the cost ofcentring, shuttering, finishing and reinforcement with 1:1.5:3


2/74


730.00 mtrs 61.10

8

16000.00 kg 42.70

9

90.00 mtrs 220.00

10

90.00 mtrs 50.00

11

Edges of slabs and breaks in floors and walls.7.1) Under 20 cms wide

Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete.8.1) Thermo-Mechanically Treated bars.

Supplying precast RCC frames for doors of sectional area notless than 60sq.cm in ready to assemble members withmortice tenon dovetailed joints members casted withcontrolled concrete conforming to M 40 grade and havingreinforcement not less than 120kg/cum of concrete includingmaking a provision for fixing required no of MS oxidised butthinges, holds fasts and other fittings for fixing sliding doorbolts, tower bolts and cleats etc., by means of machineablepolymer wonder blocks or MS. galvanised plate complete asper the CPWD Specification and directions of the engineer incharge.

Fixing of precast RCC frames ( precast RCC framedmembers to be supplied free of cost)including assembling the

members for door frames fixing to MS machinary or RCC wallface including providing and fixing six no. holds fasts of MS.Flat 40x5mm and of lenght 40 cm as per frame embedding incement concrete blocks of size 30x10x 15cm of mix 1:3:6 (icement : 3 coarse sand : 6 graded stone aggregate 20mmnominal size ) complete as per specification and the directionof Engineer in charge

Providing and laying in position ready mixed concrete


3/74


14

35.00 sqm 1309.40

15

170.00 mtrs 57.90

16

30.00 sqm 1473.50

17

Providing and fixing 16mm thick gang saw cut mirror polished(premoulded and prepolished) machine cut for kitchenplatforms, vanity counters ,window sills , facias and similarlocations of required size of approved shade, colour andtexture laid over 20mm thick base cement mortar 1:4 (1

cement : 4 coarse sand) with joints treated with white cement,mixed with matching pigment, epoxy touch ups, includingrubbing, curing moulding and polishing to edge to give highgloss finish etc. complete at all levels.14.1) Raj Nagar Plain white marble/ Udaipur green marble/Zebra black marble.14.1.1) Area of slab upto 0.50 sqm.

Extra for providing edge moulding to 18mm thick marblestone counters, Vanities etc. including machine polishing toedge to give high gloss finish etc. complete as per designapproved by Engineer-in-Charge15.1) Marble work

Providing and fixing ISI marked flush door shutters confirming

to IS : 2202 (Part I ) decorative type, core of block boardconstruction with frame of 1st class hard wood and wellmatched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters(centuryplywoodor or equivalent.16.1) 35 mm thick including ISI marked Stainless Steel butthinges with necessary screws.

Providing and fixing M.S. grills of required pattern in frames of


4/74


22.2) 100 mm 16.00 each 35.30

22

16.00 each 19.05

23

40.00 mtrs 353.10

24

Providing and fixing aluminium hanging floor door stopper ISImarked anodised (anodic coating not less than grade AC 10as per IS : 1868) transparent or dyed to required colour andshade with necessary screws etc. complete.

23.1) Single rubber stopper

Providing and fixing factory made P.V.C. door frame of size50x47mm with a wall thickness of 5mm, made out ofextruded 5mm rigid PVC foam sheet mitred at corners andjoined with 2 Nos. of 150mm long brackets of 15x15mm M.S.square tube, the vertical door profiles to be reinforced with19x19mm M.S. square tube of 19 gauge, EPDM rubbergasket weather seal to be provided through out the frame.

The door frame to be fixed to the wall using M.S. screws of65/100mm size complete as per manufacturers specificationand direction of Engineer-in-Charge.

30mm thick factory made panel PVC door shutter consistingof frame made out of M.S. tubes of 19 gauge thickness and

size of 19mm x 19mm for styles and 15x15mm for top &bottom rails. M.S. frame shall have a coat of steel primers ofapproved make and manufacture . M.S. frame covered with5mm thick heat moulded PVC 'C' channel of size 30mmthickness, 70mm width out of which 50mm shall be flat and20mm shall be tapered in 45degree angle on either sideforming styles; and 5mm thick, 95mm wide PVC sheet out ofwhich 75mm shall be flat and 20mm shall be tapered in 45degree on the inner side to form top and bottom rail and115mm wide PVC sheet out of which 75mm shall be flat and20mm shall be tapered on both sides to form lock rail. Top,bottom and lock rails shall be provided either side of the

l 10 (5 2 ) thi k 20 id PVC h t


5/74


27

400.00 kg 51.20

28

100.00 sqm 1112.55

29

130.00 sqm 556.60

30

40 00 sqm 598 65

Steel work welded in built up sections/framed work includingcutting hoisting, fixing in position and applying a priming coatof approved steel primer using structural steel etc.as required.28.1) In gratings, frames, guard bar, ladders, railings,brackets, gates & similar works.

Marble stone flooring with 16mm thick marble stone (sampleof marble shall be approved by Engineer-in-charge) ove 20mm (average) thick base of cement mortar 1:4 (1 cement :4coarse sand) laid and jointed with grey cement slurryincluding rubbing and polishing complete with:29.1) Udaipur Green Marble

Providing and fixing Ist quality ceramic glazed tilesconforming to IS : 13753 of minimum thickness 5 mm ofapproved make like NITCO, ORIENT, SOMANY KAJARIA, orequivalent make in all colours, shades except begundy, bottlegreen, black of any size as approved by Engineer-in-Chargein skirting, risers of steps and dados over 12 mm thick bed ofCement Mortar 1:3 (1 cement : 3 Coarse sand) and jointingwith grey cement slurry @ 3.3kg per sqm including pointing in

white cement mixed with pigment of matching shadecomplete.

Providing and laying Ceramic glazed floor tiles 300x300 mm(thickness to be specified by the manufacturer) of 1st qualityconforming to IS : 13755 of NITCO, ORIENT, SOMANY

KAJARIA, or equivalent make in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar1:4 (1 cement : 4 Coarse sand) including pointing the joints


6/74


33

9.00 each 134.20

9.00 each 263.10

34

18.00 each 96.90

35

Providing and fixing on wall face unplasticised - PVC mouldedfittings/accessories for unplasticised - Rigid PVC rain waterpipes conforming to IS : 13592 Type A including jointing withseal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion.(prince company or equivalent)34.1) Bend 87.534.1.1) 110 mm bend

34.2) Shoe (Plain)34.2.1) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approveddesign to unplasticised - PVC rain water pipes by means of

50x50x50mm hard wood plugs, screwed with M.S. screws ofrequired length including cutting brick work and fixing incement mortar 1:4 (1 cement : 4 coarse sand) and makinggood the wall etc. complete.35.1) 110 mm

Providing and laying integral cement based water proofingtreatment including preparation of surface as required fortreatment of roofs, balconies, terraces etc consisting of

following operations. (a) Applying and grouting a slurry coat ofneat cement using 2.75 kg/sqm. of cement admixed withproprietary water proofing compound conforming to IS. 2645over the RCC slab including cleaning the surface beforetreatment. b) Laying cement concrete using brokenbricks/brick bats 25 mm to 100mm size with 50% of cementmortar 1:5 (1 cement : 5 coarse sand) admixed withproprietary water proofing compound conforming to IS : 2645over 20 mm thick layer of cement mortar of mix 1:5 (1cement :5 coarse sand ) admixed with proprietary water

proofing compound conforming to IS : 2645 to required slopeand treating similarly the adjoining walls upto 300 mm heightincluding rounding of junctions of walls and slabs


7/74


39

1500.00 sqm 45.00

40

665.00 cm per metre 1.65

41

500.00 sqm 41.55

42

1000.00 sqm 17.20

43

750.00 sqm 60.10

44

80.00 sqm 75.60

45

Supplying and applying Altek superfine putty (internal) orequivalent having anti-fungal and anti-rusting, agents,manufactured with marble powder of 20 microns and acrylicbinder using spatula in two coats directly over, the cementplastered surface to give an ultra smooth, uniform and evensurface including scrapping of loose particles etc. fromplastered surface and smoothening the surface with sandpaper etc. complete as directed by Engineer-in-charge.

12 mm thick plain cement mortar bands in cement mortar 1:4(1 cement : 4 fine sand) :41.1) Raised Band

Distempering with oil bound washable distemper of approvedbrand and manufacture to give an even shade.42.1) New work (two or more coats) over and includingpriming coat with cement primer

Applying one coat of cement primer of approved brand andmanufacture on wall surface :43.1) Cement primer

Finishing walls with Premium Acrylic Smooth exterior paintwith Silicone additives of required shade.44.1) New work (Two or more coats applied @ 1.43 ltr/ 10sqm. over and including base coat of water proofing cementpaint applied @ 2.20 kg/ 10 sqm).

French sprit polishing:Two or more coats on new works

including a coat of wood filler.

Wall painting with plastic emulsion paint of approved brand


8/74


51

80.00 kg 0.85

52

55.00 sqm 24.70

53

8.00 each 3282.95

54

8.00 each 1044.90

55

8.00 each 705.90

56

Dismantling steel work in built up sections in angles, tees,flats and channels including all gusset plates, bolts, nuts,cutting rivets, welding etc. including dismembering andstacking within 50 metres lead.

Dismantling roofing including ridges, hips valleys and guttersetc., and stacking the material within 50 metres lead of:53.1) G.S. Sheet

Providing and fixing white vitreous china pedestal type watercloset (European type W.C. pan) with seat and lid, 10 litre lowlevel white P.V.C. flushing cistern with manually controlleddevice (handle lever), conforming to IS : 7231,Parryware/Hindware/Seabird / Orient ( Coral ) with all fittings

and fixtures complete including cutting and making good thewalls and floors wherever required.54.1) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.Pn brass pillar taps, Kingston/Gem/Techno/Parko, 32mm C.P. brass waste of standard pattern, including painting

of fittings and brackets, cutting and making good the wallswherever require:55.1) Flat back wash basin size 550x400 mm with single 15mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal forwash basin completely recessed at the back for the receptionof pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin


9/74


61

8.00 each 489.60

8.00 each 364.45

62

40.00 each 126.50

63.2) 75 mm50.00 each 107.80

63

16.00 each 573.35

64

60.00 mtrs 18.60

65.2) 75 mm diameter pipe 50.00 mtrs 14.25

65

Providing and fixing single equal plain junction of requireddegree with access door, insertion rubber washer 3 mm thick,bolts and nuts complete.62.1) 100x100x100 mm62.1.1) Centrifugally cast(spun) iron as per IS - 3989

62.2) 75x75x75mm62.2.1) Centrifugally cast (spun) iron S&S as per IS: 3989

Providing lead caulked joints to sand cast iron/centrifugallycast (spun) iron pipes and fittings of diameter:63.1) 100 mm

Providing and fixing trap of self cleansing design with screweddown or hinged grating with or without vent arm complete,including cost of cutting and making good the walls andfloors :64.1) 100 mm inlet and 75 mm outlet64.1.1) Centrifugally Cast (Spun) Iron S&S as per IS: 3989.

Painting sand cast iron/centrifugally cast (spun) iron soil,waste vent pipes and fittings with paint of any colour such aschocolate grey, or buff etc. over a coat of primer (of approvedquality) for new work :65.1) 100 mm diameter pipe

Providing and fixing M.S. holder bat clamp of approved


10/74


68

16.00 each 44.75

69

8.00 each 75.90

70.2) 20mm nominal bore 8.00 each 96.80

70

8.00 each 315.80

71

16.00 each 313.10

72

15 mm nominal bore 16.00 each 347.65

73

Providing and fixing uplasticised PVC connection pipe withbrass unions69.1) 45 cm length69.1.1) 15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting

and threading the pipe and making long screws etc. complete(new work)70.1) 15mm nominal bore

Providing and fixing C.P. brass long body bib cock ofapproved quality conforming to IS standards and weighingnot less than 690 gms.a) 15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) ofstandard design and of approved make conforming toIS:8931a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixerand geyser points of approved quality conforming to IS:8931

Providing and fixing anodised aluminium work for doors,windows, ventilators and partitions with extruded built upstandard tubular and other sections of approved makeconforming to IS733 and IS 1285 anodised transparent ordyed to required shade according to IS:1868.(Minimumanodic coating of grade AC 15), fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fastenersincluding necessary filling up of gaps at junctions, at topbottom and sides with required PVC/neoprene felt etc.Aluminium sections shall be smooth, rust free, straight, mitred


11/74


74

35.00 sqm 673.55

75 Providing and fixing PVC Corner beeding for Ceramic tiles40.00 mtrs 50.0

76

8.00 each 458.15

77

120.00 sqm 40.00

78

70.00 sqm 350.80

Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with PVC / neoprenegasket etc. complete as per the architectural drawings andthe directions of engineer-in-charge . (Cost of aluminium snapbeading shall be paid in basic item)74.1) With glass panes of 5.50 mm thickness (weight not lessthan 13.75 kg / sqm)

Providing and fixing CP brass soap dish of approved quality.76.1) New dolphin 8103 of make Elvis or equivalet

Providing and fixing chicken wire mesh of 24 G x 12.5 mmhexagonal mesh in junctions of RCC members / Brickmasonry walls with nails etc . Complete .

Providing and laying APP (Atactic Polypropylene Polymer)modified prefabricated five layer 3mm thick water proofingmembrane, black finished reinforced with non-woven

polyester matt consisting of a coat of bitumen primer forbitumen membrane @ 0.40 ltr/sum. by the same membranemanufacture of density at 25C, 0.87-0.89 kg/ltr and viscosity70-160 cps. Over the primer coat the layer of membrane shallbe laid using Butane Torch and sealing all joints etc., andpreparing the surface complete. The vital physical andchemical parameters of the membrane shall be as under :Joint strength in longitudinal and transverse direction at 23Cas 650/450N/5cm. Tear strength in longitudinal andtransverse direction as 300/250N. Softening point ofmembrane not less than 150C. Cold flexibility shall be upto-2C when tested in accordance with ASTM, D - 5147. The


12/74


83

8.00 each 613.15

84

10.00 sqm 349.95

85

130.00 sqm 87.75

86

120.00 mtrs 60.00

87-55.00 sqm 300.00

88-80.00 kg 30.00

89

30.00 sqm 8500.00

90

Providing and fixing CP brass towel rail 600 mm of approvedquality84.1) Newdolphin 8101 of make Elvis or equivalet

Providing ans fixing stainless steel fly proof mesh for

aluminium windows of standard quality as per the directionsof the Engineer-in - charge.

Extra for laying Barcode design cermic design glazed tiles forskirting in place of plain colour tiles.

Dismantling GI pipe and refixing the same after completion ofthe repair work all as directed by the Engineer in charge.

87.1) 15 mm to 40 mm nominal bore

Credit for Precoated GI Sheet obtained from the dismantlingof the existing mumty roof.

Credit for mild steel obtained from the dismantling of theexising mumty roof.

Providing and fixing Built in cupboard of depth 600 mm bodyand of required size having approved shade and pattern of

1mm thick lamination on exposed outer faces over 18mmthick plywood (9 ply) exterior grade, boiling water proof ofapproved brand ISI marked and painting on inner face ofshutter, shelves and inner side box complete including CPbrass butt hinges and necessary screws etc. all complete asper the directions of the Engineer in charge (Payment will bemade only on surface area in elevation)

Providing and fixing dressing table with 1.30x1.40m size 5mm


13/74


Say Rs.

Assistant Engineer(P)-I

HCC-II, CPWD, Hyderabad

Executive Enginee

HCC-II, CPWD, Hyde

Superintending EngineerHCC-II, CPWD, Hyderabad


14/74

Amount DSR ITEM No

26374.00

5369.00 4.2.3

93627.00 5.2.1

40463 00

4.1.10+Extra for20 mm and upto

floor V level

5.3+Extra for


15/74

Amount DSR ITEM No

1833.00 5.9.16.1

683200.00 5.22.6

19800.00 MR

4500.00 MR


16/74

Amount DSR ITEM No

45829.00 8.2.1.1

9843.00 8.3.1

44205.00 9.20.1


17/74

Amount DSR ITEM No

565.00 9.100.2

305.00 9.101.1

14124.00 9.12


18/74

Amount DSR ITEM No

20480.00 10.25.2

111255.00 11.23.5

72358.00 11.36

23946 00 11 37


19/74

Amount DSR ITEM No

1208.00 12.42.5.2

2368.00 12.42.6.2

1744.00 12.43.2


20/74

Amount DSR ITEM No

67500.00 MR

1097.00 13.28.3

20775.00 13.41.1

17200.00 13.42.1

45075.00 13.47.1

6048.00 13.68.1


21/74

Amount DSR ITEM No

68.00 15.18

1359.00 15.28.1

26264.00 17.3.1

8359.00 17.7.4

5647.00 17.8


22/74

Amount DSR ITEM No

3917.00 17.43.1.2

2916.00 17.43.2.2

5060.00 17.58.1

5390.00 17.58.2

9174.00 17.60.2.2

1116.00 17.65.1

713.00 17.65.2


23/74

Amount DSR ITEM No

716.00 18.21.2

607.00 18.46.1

774.00 18.46.2

2526.00 18.51.1

5010.00 18.52.1

5562.00 18.53


24/74

Amount DSR ITEM No

23574.00 21.3.2

2000.00 MR

3665.00 MR

4800.00 MR

24556.00 MR


25/74

Amount DSR ITEM No

4905.00 MR

3500.00 MR

11408.00 MR

7200.00 MR

-16500.00 MR

-2400.00 MR

255000.00 MR

A t DSR ITEM N


26/74

Amount DSR ITEM No

52,57,800/-

(P)abad


27/74

GOVERNMENT OF INDIA

CENTRAL PUBLIC WORKS DEPARTMENT

State : Andhra Pradesh

Branch : B&R

Head of Account

Major Head

Minor Head Deposit work

Detailed Head

HISTORY:

Name of work: Vertical extension (3rd floor) of girls hostel for CITD at Bala

This Draft Detailed Estimate has been prepared by Er. P.Kanakaraju, ExIII, CPWD, Hyderabad and processed by Shri M. Seetha Rama Rao, ExecuII, CPWD, Hyderabad amounting to Rs.52,57,800/- including 5% contingenc

This detailed estimated amounting to Rs 52,57,800/- including 5% conting

to cover the probable cost of the above mentioned work. Administrative ApSsanction received from client department Vide Lt.No Citd/Estd/Girls-Hos./2corresponding civil works provision is Rs.70,50,658/- . Hence this estimateThis estimate has been prepared based on the actual quantities of existiproposed building to be constructed, for accord of Technical Sanction of the

DESIGN & SCOPE: The following provisions have been made in this estim1) Vertical extension (3rd floor) of girls hostel for CITD.


28/74

WC ESTT. : To be met out of Contigencies .

COST : Rs.52,57,800/- including 5% Contingencies

RATE : DSR 2007 with upto date Cost Index & LMR.

METHOD : By Contract after call of tenders.

TIME : 6 months.

LAND : Available.

Assistant Engineer (P) Executive EHCD-III, CPWD, Hyderabad HCD-III, CPWD

Superintending EngineerHCC-II, CPWD, Hyderabad.


29/74

Circle- HCC-II

-

agar, Hyderabad.

cutive Engineer, HCD-tive Engineer(P), HCC-ies.

ncies has been framed

proval and Expenditure010 Dt.22/02/2010 andis within the provision.ng building over whichCompetent Authority.

te.


30/74

gineer(P), Hyderabad


31/74

SCHDEULE OF QUANTITIES (Civ

Name of work: : Vertical Extension (3rd floor) at Girls Hostel for

ItemNo Description Quantity Unit

1

10.00 cum

2

1.50 cum

3

18.00 cum

4

10.00 cum

Providing and laying cement concrete in sunken floors upto floor five levelexcluding the cost of centring and shuttering ,finishing 1:5:10 (1 cement :5 finesand :10 graded stone agreegate 20mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (anythickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchorblocks, plain window sills, fillets etc.upto floor five level excluding the cost ofcentring, shuttering and finishing.2.1) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominalsize)

Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. upto floor five level excluding cost of centring,shuttering, finishing and reinforcement3.1) 1:1 1/2 :3 (1 cement : 1 1/2 coarse sand : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slopeupto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases upto floor five level excluding the cost of centring,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand :3graded stone aggregate 20 mm nominal size).


32/74

5

4.00 cum

6

50.00 sqm

6.2) Suspended floors, roofs, landings, balconies and access platform.400.00 sqm

6.3) Lintels, beams, plinth beams, girders, bressumers and cantilevers.

350.00 sqm

6.4) Columns, Pillars, Piers, Abutments, Posts and Struts150.00 sqm

6.5) Stairs, (excluding landings) except spiral-staircases.20.00 sqm

100.00 sqm

730.00 mtrs

8

16000.00 kg

Reinforced cement conccrete work in vertical and horizontal fins individual ror foringbox louvers, facias and eaves board up to floor five level excluding the cost ofcentring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5coarse sand : 3 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for:6.1) Walls (any thickness) including attached pilasters, butteresses, plinth andstring courses etc.

6.6) Vertical and horizonatal fins individual ro forming box louvers band , facias andeaves board

Edges of slabs and breaks in floors and walls.7.1) Under 20 cms wide

Reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete.8.1) Thermo-Mechanically Treated bars.


33/74

9

90.00 mtrs

10

90.00 mtrs

11

100.00 cum

Supplying precast RCC frames for doors of sectional area not less than 60sq.cm inready to assemble members with mortice tenon dovetailed joints members castedwith controlled concrete conforming to M 40 grade and having reinforcement notless than 120kg/cum of concrete including making a provision for fixing required noof MS oxidised butt hinges, holds fasts and other fittings for fixing sliding door bolts,tower bolts and cleats etc., by means of machineable polymer wonder blocks orMS. galvanised plate complete as per the CPWD Specification and directions of the

engineer in charge.

Fixing of precast RCC frames ( precast RCC framed members to be supplied freeof cost)including assembling the members for door frames fixing to MS machinaryor RCC wall face including providing and fixing six no. holds fasts of MS. Flat40x5mm and of lenght 40 cm as per frame embedding in cement concrete blocks ofsize 30x10x 15cm of mix 1:3:6 (i cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size ) complete as per specification and the direction ofEngineer in charge.

Providing and laying in position ready mixed concrete manufactured in fullyautomatic batching plant and transported to site of work in transit mixer for a leadupto 10kms having continuous agitated mixer, manufactured as per mix design ofspecified grade for reinforced cement concrete work including pumping of R.M.C.from transit mixer to site of laying , excluding the cost of centering, shutteringfinishing and reinforcement including cost of admixtures in recommendedproportions as per IS : 9103 to accelerate/ retard setting of concrete, improve

workability without impairing strength and durability as per direction of the Engineer- in - charge. M-25 grade Reinforced cement concrete by using 380kg of cementper cum of concrete.All works upto floor V level.


34/74

12

320.00 sqm

13

140.00 cum

14

35.00 sqm

15

170.00 mtrs

Half brick masonry with fly ash lime bricks (FALG Bricks) conforming to IS:12894-1989, class designation 10 average compressive strength in super structure aboveplinth level upto floor V level in :12.1) Cement mortar 1:4 (1 Cement : 4 average Coarse sand)

Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-1989,class designation 10 average compressive strength in super structure above plinthlevel upto floor V level in: 13.1) Cement mortar 1:6 (1 Cement : 6 Coarse sand)

Providing and fixing 16mm thick gang saw cut mirror polished (premoulded andprepolished) machine cut for kitchen platforms, vanity counters ,window sills , faciasand similar locations of required size of approved shade, colour and texture laidover 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing moulding and polishing to edge to give high gloss finishetc. complete at all levels.

14.1) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble.14.1.1) Area of slab upto 0.50 sqm.

Extra for providing edge moulding to 18mm thick marble stone counters, Vanitiesetc. including machine polishing to edge to give high gloss finish etc. complete asper design approved by Engineer-in-Charge15.1) Marble work


35/74

16

30.00 sqm

17

700.00 kg.

18

24.00 each

19

8.00 each

20.2) 250x16 mm 24.00 each

20

48.00 each

Providing and fixing ISI marked flush door shutters confirming to IS : 2202 (Part I )decorative type, core of block board construction with frame of 1st class hard woodand well matched teak 3 ply veneering with vertical grains or cross bands and faceveneers on both faces of shutters(century plywoodor or equivalent.16.1) 35 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews.

Providing and fixing M.S. grills of required pattern in frames of windows etc. withM.S. flats, square or round bars etc. all complete.18.1) Fixed to openings/wooden frames with rawl plugs screws etc.

Providing and fixing special quality bright finished brass cupboard or ward robelocks with four levers including necessary screws etc. complete (best make ofapproved quality).19.1) 50 mm

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to requiredcolour or shade with nuts and screws etc. complete :20.1) 300x16 mm

Providing and fixing aluminium tower bolts ISI marked anodised ( anodic coatingnot less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colouror shade with necessary screws etc. complete:21.1) 200x10 mm


36/74

21

32.00 each

22.2) 100 mm 16.00 each

22

16.00 each

23

40.00 mtrs

Providing and fixing aluminium handles ISI marked anodised (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade with necessary screws etc. complete:22.1) 125 mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour and shade with necessary screws etc. complete.23.1) Single rubber stopper

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wallthickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred atcorners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square

tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.The door frame to be fixed to the wall using M.S. screws of 65/100mm sizecomplete as per manufacturers specification and direction of Engineer-in-Charge.


37/74

24

14.00 sqm

25

2.00 sqm

26

20.00 each

30mm thick factory made panel PVC door shutter consisting of frame made out ofM.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers ofapproved make and manufacture . M.S. frame covered with 5mm thick heatmoulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mmshall be flat and 20mm shall be tapered in 45degree angle on either side formingstyles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and

20mm shall be tapered in 45 degree on the inner side to form top and bottom railand 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall betapered on both sides to form lock rail. Top, bottom and lock rails shall be providedeither side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet beprovided as gap insert for top rail & bottom rail. paneling of 5mm thick both sidePVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joinedtogether with

solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to bestuck on the interior side of the 'C' Channel using PVC solvent adhesive etc.complete as per direction of Engineer-in-charge. Manufacturers specification &drawing (for W.C. and bathroom door shutter).

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angleiron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings

complete, including applying a priming coat of approved steel primer.26.1) Using M.S. angels 40x40x6 mm for diagonal braces

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shapewith hooked ends in R.C.C. slabs, beams during laying including painting theexposed portion of loop, all as per standard design complete.


38/74

27

400.00 kg

28

100.00 sqm

29

130.00 sqm

30

40.00 sqm

Steel work welded in built up sections/framed work including cutting hoisting, fixingin position and applying a priming coat of approved steel primer using structuralsteel etc.as required.28.1) In gratings, frames, guard bar, ladders, railings, brackets, gates & similarworks.

Marble stone flooring with 16mm thick marble stone (sample of marble shall beapproved by Engineer-in-charge) over 20 mm (average) thick base of cementmortar 1:4 (1 cement :4 coarse sand) laid and jointed with grey cement slurryincluding rubbing and polishing complete with:29.1) Udaipur Green Marble

Providing and fixing Ist quality ceramic glazed tiles conforming to IS : 13753 ofminimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANYKAJARIA, or equivalent make in all colours, shades except begundy, bottle green,black of any size as approved by Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of Cement Mortar 1:3 (1 cement : 3 Coarse sand) andjointing with grey cement slurry @ 3.3kg per sqm including pointing in white cementmixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to bespecified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO,ORIENT, SOMANY KAJARIA, or equivalent make in colours such as White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4

Coarse sand) including pointing the joints with white cement and matching pigmentetc., complete.


39/74

31

300.00 sqm

32

35.00 mtrs

33

9.00 each

9.00 each

34

18.00 each

Providing and laying vitrified floor tiles (Full body) in different sizes (thickness to bespecified by the manufacturer) with water absorption's less than 0.08% andconforming to IS : 15622 of approved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the

joints with white cement and matching pigments etc., complete.32.1) Size of Tile 60x60 cm

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes(prince company or equivalent)33.1) 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessoriesfor unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A

including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap forthermal expansion.(prince company or equivalent)34.1) Bend 87.534.1.1) 110 mm bend

34.2) Shoe (Plain)34.2.1) 110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved design tounplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,

screwed with M.S. screws of required length including cutting brick work and fixingin cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc.complete.35.1) 110 mm


40/74

35

430.00 sqm

361000.00 sqm

37

800.00 sqm

Providing and laying integral cement based water proofing treatment includingpreparation of surface as required for treatment of roofs, balconies, terraces etcconsisting of following operations. (a) Applying and grouting a slurry coat of neatcement using 2.75 kg/sqm. of cement admixed with proprietary water proofingcompound conforming to IS. 2645 over the RCC slab including cleaning the surfacebefore treatment. b) Laying cement concrete using broken bricks/brick bats 25 mmto 100mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed

with proprietary water proofing compound conforming to IS : 2645 over 20 mm thicklayer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed withproprietary water proofing compound conforming to IS : 2645 to required slope andtreating similarly the adjoining walls upto 300 mm height including rounding of

junctions of walls and slabs.

c) After two days of proper curing applying a second coat of cement slurry admixedwith proprietary water proofing compound conforming to IS : 2645.d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1cement :4 coarse sand) admixed with proprietary water proofing compoundconforming to IS : 2645 and finally finishing the surface with trowel with neatcement slurry and making of 300x300 mm square.e) The whole terrace so finished shall be flooded with water for a minimum periodof two weeks for curing and for final test. All above operations to be done in orderand as directed and specified by the Engineer-in-Charge :36.1) With average thickness of 120mm and minimum thickness at khurra as 65mm.

12 mm cement plaster of mix :37.1) 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :38.1) 1:6 (1 cement : 6 coarse sand)


41/74

38500.00 sqm

39

1500.00 sqm

40665.00 cm per metre

41

500.00 sqm

421000.00 sqm

43

750.00 sqm

6mm cement plaster to ceiling of mix:39.1) 1:3 (1 cement : 3 fine sand)

Supplying and applying Altek superfine putty (internal) or equivalent having anti-fungal and anti-rusting, agents, manufactured with marble powder of 20 micronsand acrylic binder using spatula in two coats directly over, the cement plasteredsurface to give an ultra smooth, uniform and even surface including scrapping ofloose particles etc. from plastered surface and smoothening the surface with sandpaper etc. complete as directed by Engineer-in-charge.

12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 finesand) :41.1) Raised Band

Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade.42.1) New work (two or more coats) over and including priming coat with cementprimer.

Applying one coat of cement primer of approved brand and manufacture on wallsurface :43.1) Cement primer.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade.44.1) New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and includingbase coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).


42/74

4480.00 sqm

45

1000.00 sqm

46

50.00 sqm

47

2300.00 sqm

4815.00 cum

49

40.00 cum

50

50.00 cum

51

80.00 kg

French sprit polishing:Two or more coats on new works including a coat of woodfiller.

Wall painting with plastic emulsion paint of approved brand and manufacture togive an even shade:46.1) Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade :47.1) Two or more coats on new work

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives ofrequired shade.48.1) Old work (one or more coats applied @ 0.83 lt r/10 sqm).

Demolishing R.C.C. work manually/ by mechanical means including stacking ofsteel bars and disposal of unserviceable material within 50 metres lead as perdirection of Engineer-in-charge.

Demolishing brick work manually/ by mechanical means including stacking ofserviceable material and disposal of unserviceable material within 50 metres leadas per direction of Engineer-in-charge.50.1) In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal ofmaterial within 50 metres lead as per direction of Engineer-in-charge.51.1) 1:4:8 or leaner mix

Dismantling steel work in built up sections in angles, tees, flats and channelsincluding all gusset plates, bolts, nuts, cutting rivets, welding etc. includingdismembering and stacking within 50 metres lead.


43/74

52

55.00 sqm

53

8.00 each

54

8.00 each

55

8.00 each

56

8.00 each

57

8.00 each

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking thematerial within 50 metres lead of:53.1) G.S. Sheet

Providing and fixing white vitreous china pedestal type water closet (European typeW.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern withmanually controlled device (handle lever), conforming to IS : 7231,Parryware/Hindware/Seabird / Orient ( Coral ) with all fittings and fixtures complete

including cutting and making good the walls and floors wherever required.54.1) W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillartaps, Kingston/Gem/Techno/Parko, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the wallswherever require:55.1) Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillartap.

Providing and fixing white vitreous china pedestal for wash basin completelyrecessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.waste fittings complete.57.1) Semi rigid pipe57.1.1) 32 mm dia

Providing and fixing mirror thickness of required shape and size with plasticmoulded frame of approved make and shade with 6 mm thick hard board backing.58.1) Rectangular shape 453x357mm

58 P idi d fi i il t d t i


44/74

58

45.00 mtrs

40.00 mtrs

59

8.00 each

60

4.00 each

61

8.00 each

8.00 each

62

40.00 each

63.2) 75 mm50.00 each

Providing and fixing soil, waste and vent pipes :59.1) 100 mm dia59.1.1) Centrifugally cast (spun) iron socketed pipe as per IS: 3989

59.2) 75 mm diameter59.2.1) Centrifugally cast (spun) iron S&S pipe

Providing and fixing bend of required degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete.60.1) 75 mm dia60.1.1) Centrifugally cast (spun) iron socketed pipe as per IS: 3989

Providing and fixing double equal junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete :61.1) 75x75x75x75 mm61.1.1) Centrifugally cast(spun) iron as per IS - 3989

Providing and fixing single equal plain junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete.62.1) 100x100x100 mm62.1.1) Centrifugally cast (spun) iron as per IS - 3989

62.2) 75x75x75mm62.2.1) Centrifugally cast (spun) iron S&S as per IS: 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipesand fittings of diameter:63.1) 100 mm

63 Pro iding and fi ing trap of self cleansing design ith scre ed do n or hinged


45/74

63

16.00 each

64

60.00 mtrs

65.2) 75 mm diameter pipe50.00 mtrs

65

32.00 each

66

60.00 mtrs

Providing and fixing trap of self cleansing design with screwed down or hingedgrating with or without vent arm complete, including cost of cutting and makinggood the walls and floors :64.1) 100 mm inlet and 75 mm outlet64.1.1) Centrifugally Cast (Spun) Iron S&S as per IS: 3989.

Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes andfittings with paint of any colour such as chocolate grey, or buff etc. over a coat ofprimer (of approved quality) for new work :65.1) 100 mm diameter pipe

Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5mm flat ofspecified shape, projecting 75mm outside the wall surface and fixed on wall with4nos, 6mm dia expansion hold fasteners including drilling necessary holes in brickwall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to thealready fixed brackets with the help of 30mm x1.6mm galvanised M.S. flats ofspecified shape and of total length 420mm and shall be fixed with M.S. nuts, bolts,& washers of size 25x6mm, one bolts on each side of the pipe.66.1) Total bracket length 580mm of approved shape and design (for single,100mm dia pipe).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,includingcutting and making good the walls etc. (internal work)67.1) Exposed on wall67.1.1) 25mm dia. nominal bore

67 Concealed pipe including painting with anti corrosive bitumastic paint cutting


46/74

67

50.00 mtrs

68.2) 20mm dia. nominal bore30.00 mtrs

68

16.00 each

69

8.00 each

70.2) 20mm nominal bore 8.00 each

70

8.00 each

71

16.00 each

72

15 mm nominal bore16.00 each

Concealed pipe including painting with anti corrosive bitumastic paint , cuttingchases and making good the wall.68.1) 15 mm dia .nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions69.1) 45 cm length69.1.1) 15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipeand making long screws etc. complete (new work)70.1) 15mm nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conformingto IS standards and weighing not less than 690 gms.a) 15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and ofapproved make conforming to IS:8931 a) 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS:8931

73 Providing and fixing anodised aluminium work for doors windows ventilators and


47/74

73

250.00 kg

200.00 kg

74

35.00 sqm

75 Providing and fixing PVC Corner beeding for Ceramic tiles.40.00 mtrs

Providing and fixing anodised aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular and other sections of approvedmake conforming to IS733 and IS 1285 anodised transparent or dyed to requiredshade according to IS:1868.(Minimum anodic coating of grade AC 15), fixed withrawl plugs and screws or with fixing clips, or with expansion hold fastenersincluding necessary filling up of gaps at junctions, at top bottom and sides withrequired PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/panelling, C.P brass/stainless steel screws, allcomplete as per architectural drawings and the directions of Engineer-in-Charge.(Glazing and panelling to be paid for separately.)73.1) For fixed portion.73.1.1) Powder coated aluminium (minimum thickness of powder coating 50micron)

73.2) For shutters of doors, windows & ventilators including providing and fixinghinges / pivots and making provision for fixing of fittings wherever required includingthe cost of PVC / neoprene gasket required (Fittings shall be paid for separately.)73.2.1) Powder coated aluminium (minimum thickness of powder coating 50micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters andpartitions etc. with PVC / neoprene gasket etc. complete as per the architecturaldrawings and the directions of engineer-in-charge . (Cost of aluminium snapbeading shall be paid in basic i tem)74.1) With glass panes of 5.50 mm thickness (weight not less than 13.75 kg / sqm)

768 00 h

Providing and fixing CP brass soap dish of approved quality


48/74

768.00 each

77

120.00 sqm

78

70.00 sqm

79

40.00 kg

80

8.00 each

Providing and fixing CP brass soap dish of approved quality.76.1) New dolphin 8103 of make Elvis or equivalet

Providing and fixing chicken wire mesh of 24 G x 12.5 mm hexagonal mesh injunctions of RCC members / Brick masonry walls with nails etc . Complete .

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricatedfive layer 3mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane@ 0.40 ltr/sum. by the same membrane manufacture of density at 25C, 0.87-0.89kg/ltr and viscosity 70-160 cps. Over the primer coat the layer of membrane shallbe laid using Butane Torch and sealing all joints etc., and preparing the surfacecomplete. The vital physical and chemical parameters of the membrane shall be asunder :Joint strength in longitudinal and transverse direction at 23C as 650/450N/5cm.

Tear strength in longitudinal and transverse direction as 300/250N. Softening pointof membrane not less than 150C. Cold flexibility shall be upto -2C when tested inaccordance with ASTM, D - 5147. The laying of membrane shall be got donethrough the authorised applicator of the manufacturer of membrane : 3mm thick.

Providing and fixing stainless steel railing using stainless steel tubes made of

stainless steel - 304 grade, with balusters of approved pattern including cutting,welding, grinding the joints, drilling of holes and final polishing etc. complete asdirected by engineer-in-charge.

Providing and fixing C.P Brass Wall mixer with over head shower arrangementonly but without Shower of make)81.1) Nectar 5101LB of Plumber make or equivalent

81 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :


49/74

8.00 each

82

8.00 each

83

8.00 each

84

10.00 sqm

85

130.00 sqm

86

120.00 mtrs

87 -55.00 sqm

88 Credit for mild steel obtained from the dismantling of the exising mumty roof.-80.00 kg

g g82.1) Bathcharge Stylish Shower of Plumber make or equivalent.

Providing and fixing Corner glass shelf with C.P brass guard bars of approveddesign and make.83.1) Elvis Make of size 230 mm

Providing and fixing CP brass towel rail 600 mm of approved quality84.1) Newdolphin 8101 of make Elvis or equivalet

Providing ans fixing stainless steel fly proof mesh for aluminium windows ofstandard quality as per the directions of the Engineer-in - charge.

Extra for laying Barcode design cermic design glazed tiles for skirting in place ofplain colour tiles.

Dismantling GI pipe and refixing the same after completion of the repair work all asdirected by the Engineer in charge.87.1) 15 mm to 40 mm nominal bore

Credit for Precoated GI Sheet obtained from the dismantling of the existing mumtyroof.

89 Providing and fixing Built in cupboard of depth 600 mm body and of required size


50/74

30.00 sqm

90

8.00 sqm

91

20.00 sqm

92

164.00 cum

CONTRACTOR

g g p p y qhaving approved shade and pattern of 1mm thick lamination on exposed outerfaces over 18mm thick plywood (9 ply) exterior grade, boiling water proof ofapproved brand ISI marked and painting on inner face of shutter, shelves and innerside box complete including CP brass butt hinges and necessary screws etc. allcomplete as per the directions of the Engineer in charge (Payment will be madeonly on surface area in elevation)

Providing and fixing dressing table with 1.30x1.40m size 5mm thick mirror with18mm ply wood backing , supported on 1.30x 0.60 x0 .60 m size box table with150mm draw provisions with all necessary draw fittings ,box table shall be made of18mm ply with 1mm thick lamination on exposed and enamel paint and putty forinside areas including 15mm teak wood beading around the mirror as per thedirection of the Engineer in charge.

Providing and fixing 18 mm thick play wood shutters with 1 mm lamination onexternal surface and painting on internal face with 2nd class teak wood beading onall sides with necessary screws etc complete (best make of approved quality)92.1) 50mm

Removal of rubbish from the work site, to outside the campus and undisputedmuncipal ground all as directed by the Engineer- in- charge.


51/74

SCHEDULE OF QUANTITIES ( Electrical)

1

1.1 Group C100 Point

2

2.1 20 mm 200 Metre

2.2 25 mm 150 Metre

3

3.1 1 or 2 module ( 75mm x 75 mm) 25 each

3.2 3 or 4 module ( 125 x 75 mm) 15 each

3.3 6 module ( 200 mm x 75 mm) 5 each

3.4 8 module ( 125 mm x 125 mm) 5 each

Supplying and fixing PVC conduit in surface/recessed including cutting the wall andmaking good the same in case of recessed conduit along with accessories andsuitable size GI switch boxes for modular switches for light point/ fan point/ exhaustfan point/ call bell point etc., complete as required.

Supplying and fixing of following sizes of PVC conduit along with accessories insurface/ recess including cutting the wall and making good the same in case ofrecessed conduit as required.

Supplying and fixing following size/ modules, GI box for modular swithces/ socketsin recess etc., as required.

CONTRACTOR


52/74

l)


53/74

ITD at Balanagar,Hyderabad.

Rate Amount


54/74


55/74


56/74


57/74


58/74


59/74


60/74


61/74


62/74


63/74


64/74


65/74


66/74


67/74


68/74


69/74


70/74


71/74


72/74

Executive EngineerHCD-III, CPWD, Hyderabad


73/74

Executive EngineerHCD-III, CPWD, Hyderabad


74/74

girls hostel citd

Documents