giv srm 51-77-00 0pbo-s-571 sodium carbonate, anhydrous, technical o-s-595 sodium dichromate,...

REPAIRS TO THIN WALL TUBES AND DUCTING — GENERAL

1. Thin Wall Tubes and Ducting

Scope

This document provides inspection standards, rework criteria and rework / repair procedures for thin wallducting fabricated from nickel chromium base, Corrosion Resistant Steel (CRES) and aluminum alloys.

These procedures are for high and low pressure, high and low temperature pneumatic, fuel, vent andcooling ducts in the GIV aircraft.

A. Applicability

The focus of this document is limited to fuel line and duct assemblies containing tubes with a 1.00inch or greater O.D. and a 0.025 - 0.063 inch wall thickness. These duct assemblies are typicallyfound in the air conditioning, fuel, anti-ice, pneumatic and powerplant areas of the aircraft.

The repairs or their related procedures are directed toward the failure and damage conditionscommonly encountered on in-service aircraft. Examples of such in-service conditions are dents,corrosion, scratches, gouges, abrasion, cracks and damaged flanges. The basic repair methods arewelding to fill in areas, corrosion removal and blending, doublers and duct section replacement.

Every assembly should be treated as an individual case. The methods and repair details specified inthis document are structurally and functionally acceptable, however the merits and cost of eachrepair versus assembly replacement rests with the operator. The availability of equipment, qualifiedpersonnel and flight schedules, are variables which enter into the cost of repair versus replacement.Generally, where large amounts of damage can be attributed to extreme pressure, temperature andvibration conditions, the complete replacement of the assembly may be more desirable than therepair or partial replacement and is recommended.

This document lists Gulfstream Aerospace Material Process Specifications (GAMPS) and GulfstreamMaterial Specifications (GMS) which are intended for use when the repair is to be incorporated atGulfstream facilities. Applicable military and commercial specifications for the equivalent processesare provided for repairs and processes performed by other repair facilities and personnel. In manycases, GAMPS have been reproduced in this manual. See Individual Process and Finish Codes,51-20-00, General for GAMPS cross reference. The listed specifications should be reviewed forapplicability prior to beginning the repair.

B. Safety

All appropriate federal, state, local governing body and corporate safety and health regulations shallbe followed during all phases of work. Tables 3 and 4 list appropriate United States Department ofLabor, Occupational Safety and Health Administration codes pertaining to the processes andprocedures defined in this document. Users of this document should interrogate local governingauthorities regarding additional safety and health laws.

C. How To Use This Section

Identify the damaged duct / line and material type. See Applicable GIV Ducts / Tubes, 51-77-01,General.

Clean the damaged areas using the applicable cleaning procedure for the duct / line material. SeeDuct Cleaning and Passivation, 51-77-01, Allowable Damage.

Fully define the extent of the damage by inspecting the damaged areas using applicable inspectionprocedure. See Duct Inspection, 51-77-01, Allowable Damage.

With the damage type and extent fully defined, repair the damage using the applicable repairprocedures and support procedures / information. See Duct Repair, 51-77-01, General, Fusion

STRUCTURAL REPAIR MANUAL

51-77-00

February 29/04

Welding Procedure, 51-77-03, Repair, Hydrostatic Pressure Test, 51-77-04, Repair, FinishRequirements, 51-77-05, Repair, Insulation, 51-77-06, Repair, Special Tools and Fixtures, 51-77-07,Repair, Material Listings, 51-77-00, General and Supplier Listings, 51-77-00, General.

D. Applicable Documents

General - Unless otherwise specified, the following specifications, standards, publications and otherdocuments in effect on the date of issue of this document form a part of this document to the extentspecified herein.

For Specifications, see Table 1.For Standards, see Table 2.For Regulation, see Table 3.

E. Availability of Documents

Detailed Specifications and Standards are available from the following agencies (see Table 4):

Table 1: Tube Specifications

FEDERAL

QQ-P-35 Passivation Treatment for Austenitic, Ferritic and Martensitic Corrosion Resistant Steels

A-A-41 Sodium Carbonate, Anhydrous

TT-N-95 Aliphatic Naphtha, Technical

QQ-A-250/8 Aluminum Alloy 5052, Plate and Sheet

QQ-A-250/11 Aluminum Alloy 6061, Plate and Sheet

A-A-289 Brushes, Acid, Swabbing

O-C-303 Chromium Trioxide, Technical

O-N-350 Nitric Acid, Technical

BB-N-411 Nitrogen, Technical

CCC-C-440 Cheesecloth, Cotton

CCC-C-458 Cloth, Flannel

O-S-571 Sodium Carbonate, Anhydrous, Technical

O-S-595 Sodium Dichromate, Anhydrous, Technical

O-S-604 Sodium Metasilicate, Technical

L-S-626 Sponges, Synthetic

O-S-642 Sodium Phosphate, Tribasic, Technical, Anhydrous, Dodecahydrate and Monohydrate, Technical

H-B-643 Brushes, Acid Swabbing

O-O-670 Phosphoric Acid, Technical

P-D-680 Dry Cleaning Solvent

WW-T-700/4 Tube, Aluminum Alloy, Drawn, Seamless, 5052

WW-T-700/6 Tube, Aluminum Alloy, Drawn, Seamless, 6061

TT-I-735 Isopropyl Alcohol

O-S-809 Sulfuric Acid, Technical


51-77-00February 29/04

SS-P-821 Pumice, Ground Abrasive

TT-X-916 Xylene, Technical

A-A-1043 Steel Wool

A-A-1044 Wool, Metallic (Copper and Aluminum)

A-A-1048 Coated Abrasive Cloth, Aluminum Oxide

BB-H-1168 Helium, Technical

A-A-1200 Coated Abrasive Cloth, Silicon Carbide

A-A-1203 Lapping and Grinding Compound, Valve

MMM-A-1617 Adhesive, Rubber Base, General Purpose

A-A-2516 Brushes, Wire, Rotary, Wheel, Crimped Wire

TT-R-2918 Remover, Paint, No Hazardous Air Pollutants

A-A-50169 Skin Protective Compounds, Chemical Barrier

MILITARY

MIL-C-1164 Cloth, Terry, Cotton

MIL-Y-1140 Yarn, Cord, Sleeving, Cloth and Tape-Glass

MIL-A-3316 Adhesives, Fire-Resistant, Thermal Insulation

MIL-S-5002 Surface Treatments and Metallic Coatings for Metal Surfaces of Weapons Systems

MIL-B-5087 Bonding, Electrical and Lightning Protection, for Aerospace

MIL-C-5541 Chemical Films and Chemical Film Material for Aluminum and Aluminum Alloys

MIL-F-6939 Flux, Aluminum and Aluminum Alloys, Gas Welding

MIL-F-7105 Pipe Threads, Taper, Aeronautical National Form, Symbol, ANPT, General requirements For

MIL-A-8625 Anodic Coating for Aluminum and Aluminum Alloys

MIL-S-8802 Sealing Compound, Temperature resistant, Integral Fuel tanks and Fuel Cell Cavities, HighAdhesion

MIL-A-9962 Abrasive Mats, Nonwoven, Nonmetallic

MIL-C-10578 Corrosion Removing and Metal Conditioning Compound, (Phosphoric Acid Base)

MIL-T-15126 Insulation Tape, Electrical, Pressure Sensitive Adhesive and Pressure Sensitive ThermosettingAdhesive

MIL-D-16791 Detergents, General Purpose (Liquid Nonionic)

MIL-D-16909 Buffing and Polishing Compounds

MIL-T-18455 Argon, Technical

MIL-E-19933 Electrodes and Rods - Welding, Bare, Chromium, Nickel Steels

MIL-A-21380 Abrasive, Materials, For Blasting

MIL-E-21562 Electrodes and Rods - Welding, Bare, Nickel Alloys

MIL-E-22200 Electrodes, Welding, Mineral Covered, 1C-3 Iron-Powder, Low-Hydrogen Medium and High TensileSteel, as Welded or Stress Relieved Weld Application


51-77-00

February 29/04

MIL-T-23397 Tapes, Pressure Sensitive Adhesive, For Masking During Paint Stripping Operations MIL-B-23958Brush, Cleaning, Aircraft, Metal Brightening

MIL-A-24641 Hydrofluoric Acid, Technical

MIL-R-25134 Remover, Paint and Lacquer, Solvent Type

MIL-C-25769 Cleaning Compound, Aircraft Surface, Alkaline Water Base

MIL-C-38334 Corrosion Removing Compound, Prepaint, For Aircraft Aluminum Surfaces

MIL-C-38736 Cleaning Compound, Solvent Mixtures (Metric)

MIL-C-43616 Cleaning Compounds, Aircraft Surface

MIL-R-81294 Remover, Paint, Epoxy, Polysulfide and Polyurethane Systems

MIL-C-81733 Sealing and Coating Compound, Corrosion Inhibitive

MIL-R-81903 Remover, Acid Activated, For Amine - Cured Epoxy Coating Systems

MIL-C-83957 Cleaning and Polishing Pad, Nonmetallic (for Aircraft)

MIL-C-85570 Cleaning, Compound, Aircraft Exterior

MIL-C-87936 Cleaning Compounds, Aircraft Exterior Surface, Water Dilutable

MIL-C-87937 Cleaning Compound, Aerospace Equipment

GULFSTREAM

GAMPS 1101 Tape, Tube Identification - Application of

GAMPS 1105 Identification Marking of Fabricated Metallic Parts and Assemblies

GAMPS 2215 Nonstructural Tubing Swaging, Reducing and Expanding of

GAMPS 2216 Insulation Installation, Ducts and Tubes

GAMPS 2302 Fusion Welding of Steels, Corrosion and Heat Resistant Steels and

GAMPS 2505 Swaging of Tubing to Flanges (Including Gammah Flanges)

GAMPS 2605 Electrical Bonding Requirements

GAMPS 3103 Epoxy Primer Coating - Hydraulic Fluid Resistant (Finish 2012), 51-07-10, Repair

GAMPS 3116 Waterborne Epoxy Primer - Preparation and Application (Finish 3012), 51-07-10, Repair

GAMPS 3205 Gloss Epoxy Finish - Application (Includes Finish 2013 and 3013), 51-07-10, Repair

GAMPS 4101 Preparation of Surfaces by Abrasive Methods

GAMPS 4102 Acid Cleaning of Aluminum and Aluminum Alloys

GAMPS 4103 Acid Cleaning of Ferrous Alloys

GAMPS 4105 Alkaline Cleaning of Ferrous and Nonferrous Alloys

GAMPS 6108 Chromate Conversion Coating Aluminum Alloys

GAMPS 9101 Ultrasonic Quality Requirements for Aluminum Alloy Products

GAMPS 9102 Ultrasonic Inspection of Low Alloy and Stainless Steel

GAT535C Tape, Function Identification and Symbol, Solvent Resistant, Noncorrosive, Color Coded

GAT835AF Tape, Rubber Resin Adhesive, Pressure Sensitive, Thermosetting, Glass Fiber

GMS 3009 Inconel 625 Tubing, Corrosion and Heat Resistant


51-77-00February 29/04

GAS115G Solvent Compound - Cleaner / Degreaser

GAS115H Solvent Compound - Cleaner / Degreaser - Mixed hydrocarbons

GAS115J Solvent Compound - Aqueous Cleaner / Degreasers

GAS115K Solvent - Methyl Propyl Ketone (MPK)

INDUSTRY

AMS 1375 Remover, Paint, Epoxy and Polyurethane Paint Systems

AMS 1376 Remover, Epoxy Paint, Acid Type, Thickened

AMS 1377 Remover, Paint, Epoxy and Polyurethane Paint Systems. Nonchlorinated Solvent

AMS 4015 Aluminum Alloy Sheet and Plate, 2.5Mg - 0.25Cr (5052-0), Annealed

AMS 4025 Aluminum Alloy Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061), Annealed

AMS 4027 Aluminum Alloy Sheet and Plate, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061;-T6 Sheet, -T651 Plate),Solution and Precipitation Heat Treated

AMS 4069 Aluminum Alloy Tubing, Seamless, Drawn, Round, Close Tolerance 2.5Mg - 0.25Cr (5052-0),Annealed

AMS 4070 Aluminum Alloy Tubing, Seamless, Drawn, Round, 2.5Mg - 0.25Cr (5052-0)

AMS 4071 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round - 2.5Mg-0.25Cr (5052-0)

AMS 4079 Aluminum Alloy Tubing, Seamless, Drawn, Round, Close Tolerance, 1.0Mg - 0.60Si - 0.28Cu -0.20Cr (6061-0), Annealed

AMS 4080 Aluminum Alloy Tubing, Seamless, Drawn, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-0), Annealed

AMS 4082 Aluminum Alloy Tubing, Seamless, Drawn, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6), Solutionand Precipitation Heat Treated

AMS 4083 Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr(6061-T6), Solution and Precipitation Heat Treated

AMS 5510 Steel, Corrosion and Heat Resistant, Strip and Plate, 18Cr - 10.5Ni - 0.40Ti (SAE 30321) SolutionHeat Treated

AMS 5570 Steel, Corrosion and Heat Resistant, Seamless Tubing, 18Cr - 11Ni - 0.40Ti (SAE 30321) SolutionHeat Treated

AMS 5557 Steel Tubing, Seamless and Welded, Corrosion and Heat Resistant, 18Cr - 10.5Ni - 0.40Ti (SAE30321), Hydraulic, Solution Heat Treated

AMS 5559 Steel Tubing, Welded, Corrosion and Heat Resistant, 18Cr - 10.5Ni - 0.40Ti (SAE 30321), ThinWall, Solution Heat Treated

AMS 5666 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, Extrusions and Rings 62Ni - 21.5Cr -9.0Mo - 3.65 (Cb+Ta), Annealed

AMS 5743 Steel, Corrosion and Heat Resistant, Bars and Forgings, 15.5Cr - 4.5Ni -2.9Mo - 0.10N SolutionHeat Treated, Sub-Zero Cooled, Equalized and Over-Tempered

AMS 5744 Steel Bars and Forgings, Corrosion and Moderate Heat Resistant, 15.5Cr - 4.5Ni - 2.9Mo - 0.10NHeat Treated, 170,000 PSI Tensile Strength

ANSI / AWS A5.4 Stainless Steel Covered Arc Welding Electrodes

ANSI / AWS A5.9 Stainless Steel Bare, Cored and Stranded Electrodes and Welding Rods

ANSI / AWSA5.10 Aluminum and Aluminum Alloy Bare Welding Rods and Electrodes


51-77-00

February 29/04

ANSI / AWSA5.11 Nickel and Nickel Alloy Covered Arc Welding Electrodes

ANSI / AWSA5.12 Tungsten Electrodes for Arc Welding

ANSI / AWSA5.14 Nickel and Nickel Alloy Bare Electrodes and Welding Rods

ARP 1725 Skin Protective Compound Chemical Barrier

AS 568 Aerospace Size Standard for O-rings

ASTM B 443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) Plate,Sheet and Strip

ASTM B 444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) Pipeand Tube

ASTM B 446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625) Rodand Bar

ASTM C 800 Glass Fiber Blanket Insulation (Aircraft Type)

ASTM D 304 Standard Specification for n-Butyl Alcohol (Butanol)

ASTM D 329 Standard Specification for Acetone

ASTM D 537 Standard Specification for Sodium Metasilicate

ASTM D 538 Standard Specification for Trisodium Phosphate

ASTM D 740 Standard Specification for Methyl Ethyl Ketone (MEK)

ASTM D 770 Standard Specification for Isopropyl Alcohol

ASTM D 929 Standard Specification for Borax

ASTM E 1417 Standard Practice for Liquid Penetrant Inspection

AWS FMS-86 Filler Metal Comparison Charts

CGA G9.1 Commodity Specification for Helium

CGA G11.1 Commodity Specification for Argon

Table 2: Standards

FEDERAL

FED-STD-H28 Screw-Thread Standards for Federal Services, Section 13, Stub Acme Threads

MILITARY

MIL-STD-22 Welded Joint Design

MIL-STD-271 Nondestructive Testing Requirements for Metals

MIL-STD-338 Cleaning and Treatment of Aluminum Parts Prior to Painting

MIL-STD-372 Welding, Gas Metal-Arc and Gas Tungsten Arc, Aluminum Alloys, Readily Weldable For Structures,Excluding Armor.

MIL-STD-453 Inspection Radiographic

MIL-STD-605 Inorganic Acids and Acid Anhydrydes, Technical Grade

MIL-STD-608 Aldehydes and Ketones, Technical Grade


51-77-00February 29/04

MIL-STD-610 Halogenated Hydrocarbon Compounds and Solvents, Technical Grade (Metric)

MIL-STD-1208 Inorganic Sodium Salts and Compounds, Technical Grade (Sodium Bicarbonate through SodiumTripolyphosphate)

MIL-STD-1220 Alcohols and Amines Technical Grade

MIL-STD-1247 Markings, Functions and Hazard Designations of Hose, Pipe and Tube Lines for Aircraft, Missileand Space

MIL-STD-1595 Qualification of Aircraft, Missile and Aerospace Fusion Welders

MIL-STD-1890 Welded Joints, Inspection of

MIL-STD-1949 Magnetic Particle Inspection

MIL-STD-2219 Fusion Welding for Aerospace Applications MIL-STD-6868 Inspection Process, Magnetic Particle

MS 25083 Jumper Assembly, Electric, Bonding and Current Return

MS33649 Bosses, Fluid Connection, Internal Straight Thread

MS33660 Tubing End, Hose Connection, Standard Dimension For

REGULATIONS (See Table 3)

29 CFR Occupational Safety and Health Standard Chapter 17; PART 1910Occupational Safety and Health Administration Department of Labor

Table 3: Regulations

PROCESS HAZARD / CONTAMINANT CONTROL MEASURE OSHA REFERENCES

Abrasive blasting Silica dust / total dustexposure

Local exhaust ventilationRespiratory protectionGoggles and face shield

(29CFR) 1910.94a(29CFR) 1910.134(29CFR) 1910.133

Abrasive blasting Noise Noise exposure limitsHearing protection devices

(29CFR) 1910.95(29CFR) 1910.134

Abrasive blasting Skin abrasion Leather protective garments (29CFR) 1910.1000Table Z-3

Acid cleaning Acid gas / mist exposure

Local exhaust ventilation(29CFR) 1910.94(l)Respiratory protectionGoggles and face shield

(29CFR) 1910.94(l)(29CFR) 1910.133(29CFR) 1910.134

Acid cleaning Skin contact Impervious gloves andgarment

(29CFR) 1910.1000Table Z-1

Alkaline cleaning Alkaline mist exposureLocal exhaust ventilationRespiratory protectionGoggles and face shield

(29CFR) 1910.94(d)(29CFR) 1910.133(29CFR) 1910.134

Alkaline cleaning Skin contact Impervious gloves andgarments

(29CFR) 1910.1000Table Z-1

Pickling / passivationexposure Acid gas / mist exposure


(29CFR) 1910.94(l)(29CFR) 1910.133(29CFR) 1910.134

Pickling / passivationexposure Skin contact Impervious gloves and

garments(29CFR) 1910.1000Table A

Solvent cleaning Petroleum or chlorinatedhydrocarbon exposure


(29CFR) 1910.94(d)(29CFR) 1910.133(29CFR) 1910.134


51-77-00

February 29/04

PROCESS HAZARD / CONTAMINANT CONTROL MEASURE OSHA REFERENCES

Solvent cleaning Skin contact Impervious gloves andgarments

(29CFR) 1910.1000Table Z-1 and Z-2

Emulsion cleaning Petroleum or chlorinatedhydrocarbon exposure


(29CFR) 1910.94(d)(29CFR) 1910.133(29CFR) 1910.134

Emulsion cleaning Skin contact Impervious gloves andgarments

(29CFR) 1910.1000Table Z-1 and Z-2

Table 4: Specifications and Standards Addresses

DOCUMENT TYPE ADDRESS

Federal SpecificationsSuperintendent of DocumentsUS Government Printing OfficeWashington, DC 20402

Federal RegulationsSuperintendent of DocumentsUS Government Printing OfficeWashington, DC 20402

Military SpecificationsEngineering Specifications and Standards Dept.Naval Air Engineering CenterPhiladelphia, PA 19112

AMS / ARP SpecificationsCustomer Service Department Publications GroupSAE, 400 Commonwealth Dr.Warrendale, PA 15906

ANSI SpecificationsAmerican National Standards Institute, Inc.1430 BroadwayNew York, New York 10018

ASTM SpecificationsAmerican Society for Testing and Materials1916 Race StreetPhiladelphia, PA 19103

AWS SpecificationsAmerican Welding Society Inc.500 NW LeJeune Road P. O. Box 351040Miami, Florida 33135

CGA SpecificationsCompressed Gas Association, Inc.Crystal Gateway 1 Suite 5011235 Jefferson Davis HighwayArlington Virginia, 22202

Gulfstream SpecificationsGulfstreamTechnical Services Dept. 893; M / S D10500 Gulfstream RdSavannah, Georgia 31408

2. Supplier Listings

The following supplier listings are provided for information purposes only.

The information in the following tables was obtained from various domestic and foreign sources.Gulfstream assumes no responsibility for the accuracy of these listings. Gulfstream approval of specific


51-77-00February 29/04

suppliers is neither intended nor implied.

The suppliers listed herein should be consulted regarding the current availability of the products listed inMaterial Listings, 51-77-00, General. Supplier names, addresses and telephone numbers, whereavailable, appear in the tables.

See Table 5 for North American Suppliers.

See Table 6 for United Kingdom Suppliers.

See Table 7 for European suppliers.

See Table 8 for Australian suppliers.

Additional information regarding U.S. and foreign sources of products qualified to the Military, Federal, AN,MS, NAS, SAE, etc. standards and specifications listed, may be obtained from the current edition of:

The Identified Sources of SupplyThe SourceNational Standards Association5161 River Rd.Bethesda, MD 20816

Table 5: North American Suppliers (NA)

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 1

Dow Corning Chemical Co2040 Willard W. Dow CenterMidland, MI 48674Phone: 517 832 1000FAX: 581 810 2666

NA 2

Parker & Amchem32100 Stephenson HwyMadison Heights, MI 48071Phone: 313 583 9300FAX: 313 583 2976

NA 3Bostic Industrial DivisionBoston StMiddleton, MA 01949Phone: 617 771 0100

NA 4

Frederick Gumm Chem. Co538 Forrest StKearney, NJ 07032Phone: 201 991 4171FAX: 201 991 5855

NA 5

Inco Alloys International, Inc.P.O. Box 1958Huntington, WV 25270Phone: 304 526 5100Telex: 886413FAX: 304 526 5441

NA 6 ICI Americas, Inc.Wilmington, DE 19879


51-77-00

February 29/04

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 7British Oxygen Canada, LTDEtobicokeOntario, Canada

NA 8

McGean-Rohco, Inc.Cee Bee Division9520 E. CeeBee Dr.Downey, CA 90241Phone: 213 803 4311FAX: 213 803 6701

NA 9

Washington Mills Mineral Corp.20 N. Main St.North Grafton, MA 01536Phone: 508 839 6511FAX: 508 839 7676

NA 10

MacGill Chemical Co2300 St. Clair Ave.Cleveland, OH 44117Phone: 216 486 5300Telex: 810 421 8465

NA 11

Diversey Wyandotte1532 Biddle AveWyandotte, MI 48192Phone: 313 281 0930FAX: 313 283 6550

NA 12

3M3M CenterBldg. 220-8E-04St. Paul, MN 55144Phone: 617 733 1441

NA 13

United States Welding Corp.20700 Dearborn St.Chatsworth, CA 91311Phone: 818 341 2021FAX: 818 882 9001

NA 14

Potter Indusatries, Inc.20 Waterview Blvd. 4Parsippiny, NJ 0705Phone: 201 299 2900Telex: 232219054FAX: 201 335 9350

NA 15

Cataphote, Inc.1001 Underwood DriveP.O. Box 2369ODJackson, MS 39225Phone: 601 939 4612Telex: 58-5467FAX: 601 932 5339


51-77-00February 29/04

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 16

Norton Co.P.O. Box 15008Worcester, MA 01615Phone: 508 795 50FAX: 508 795 542000

NA 17Turco Products7300 Bolsa Ave.Westminster, CA 92684

NA 18

Ardrox LTDP.O. Box 814, 17-19 Woodburns AveSt. Catherines, Ontario 62R 6Y3Phone: 416 688 1085FAX: 416 684 4214

NA 19

DeSoto, Inc.1608 4th St.Berkely, CA 94710Phone: 415 526 1525FAX: 415 525 5669

NA 20

Rolls Royce, Inc11911 Freedom Dr.Reston, VA 22090Phone: 703 834 1700Telex: 6438391FAX: 703 709 6088

NA 21

Ardrox, Inc.16961 Knott StLa Mirada, CA 90638Phone: 714 739 2821FAX: 714 670 6480

NA 22

D.A. Stuart LTD89 Nipissing Rd.Milton, Ontario L9T 1R3Phone: 416 878 4156FAX: 416 878 7472

NA 23

Pauli & Griffon907 Cotting LnVacarvillem, CA 95688Phone: 707 447 7000Telex: 176328FAX: 707 447 7036

NA 24

Aeroblasting, Inc.100 Park Point, 630 E. Bronson StSouth Bend, IN 46618Phone: 219 288 0461FAX: 219 234 0702

NA 25Blast Off, Inc.P.O. Box 312Perdido, AL 36562


51-77-00

February 29/04

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 26

Corrosion Specialties, Inc.P.O. Box 146 5125 South Royal Atlanta Dr.Tucker, GA 30085 Phone:404 938 7263FAX: 404 934 8704

NA 27

Aerolyte Systems1657 Rollins Rd.Burlingham, CA 94010Phone: 415 570 6000FAX 415 697 0217

NA 28

Patent plastics, Inc.638 Maryville Pike, P.O. Box 9246Knoxville, TN 37920Phone: 615 573 5411FAX: 615 693 6007

NA 29

Eldorado Chemical Co.P.O. Box 34837San Antomio, TX 78265Phone: 512 653 2060FAX: 512 653 0825

NA 30

Gallard Schlesinger Ind., Inc.584 Mineola Ave.Carle Place, NY 11514Phone: 516 333 5600FAX: 516 333 5628

NA 31

Haynes international, Inc1020 W. Park Ave. P.O. Box 9013Kokoma, IN 46904Phone: 317 456 6612FAX: 317 456 6905

NA 32

Witco Allied Kelite Division2701 Lake StreetMelrose Park, IL 60160-3041Phone: 708 450 7463FAX: 708 450 7265

NA 33

Stanley Aviation Corporation2501 Dallas StreetAurora, CO 80010Phone: 303 364 6411FAX: 303 360 8965

NA 34

Flight Insulation Inc.925 Industrial Park Drive, P.O. Box 6395Marietta, GA 30065Phone: 404 427 9441FAX: 404 427 1331

NA 35

Mueller Belting And Specialty Co9201 Stockport Place, P.O. Box 7503Charlotte, NC. 28241-7503Phone: 704 588 3900FAX: 704 588 6364


51-77-00February 29/04

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 36

EG and G Pressure Science11642 Old Baltimore PikeBeltsville, MD 20705-1294Phone: 301 937 9551Telex: 898353FAX: 301 937 0134

NA 37

Imo Industries IncWiggins Connectors Division500 Triggs StreetLos Angeles, CA 90022Phone: 213 269 9181Telex: 380769FAX: 213 269 3759

NA 38

Hydra Flow13259 East 166th StreetCerritos, CA , 90701Phone: 213 926 9582Twx: 9105831413FAX: 213 926 8696

NA 39

Manville Corporation,Manville High Performance Insulations717 17th StreetDenver, CO 80217-5108Phone: 800 654 3103Telex:216115FAX: 303 978 3904

NA 40

Vesper CorpArrowhead Products Division4411 Katella AveLos Alamitos, CA ,90720Phone: 714 828 7770Telex: 9105911174FAX: 714 995 3452

NA 41Western Pneumatic Tube Co835 6th St S, P.O. Box 909Kirkland, WA, 98033-0909Phone: 425 822 8271

NA 42

Crucibles Materials CorpTrent Tube DivisionP.O.Box77Easttroy, WI 53120-0077Phone: 414 642 7321

Crucibles Materials CorpTrent Tube Division141 Hammond StreetCarrollton, GA 30117

Crucibles Materials CorpTrent Tube Division4555 W Armitage AveChicago, IL 60639


51-77-00

February 29/04

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 43

Teledyne Columbia-Summerill CoStainless Tube Division Production PlantFranklin And Scottdale StreetsScottdale, PA 15683Phone: 412 887 9700

NA 44

Christiana MetalsBishop Tube DivisionRt 30 And Malin RdFrazer, PA 1 9355Phone: 215 647 3450

NA 45

Gulstream Aerospace CorporationP. O. Box 2206Savannah, GA 31402Phone: 912 965 3262Telex: 54-6470FAX: 912 9653 685

NA 46

Aeroquip Corporation, Aerospace DivisionJackson Plant300 S. East AvenueJackson, MI 49203Phone: 517 787 8121Telex: 223412

Los Angeles Plant11214 Exposition BlvdLos Angeles, CA 90064Phone: 213 478 0291Telex: 67-3288

NA 47Vulcan ChemicalsP.O. Box 7689Birmingham, AL 25253

NA 48

Deloro Stellite Inc.101 South Hanley RoadSt.Louis, MO 63105Phone: 314 862 2666Telex: 4998215FAX: 314 721 4822

NA 49Products Research and Chemical Corp5454 San Fernando RoadGlendale, CA 91203Phone: 818 242 6815

NA 50

Ardrox LTDP.O. Box 81417-19 Woodburns AvenueSt. Catherines, Ontario 62R 6Y3 CanadaPhone: 416 688 1085FAX: 416 684 4214


51-77-00February 29/04

SUPPLIERSCODE

SUPPLIERSADDRESS

NA 51

Owens Corning Fiberglass CorpFiberglass TowerToledo, OH 43659Phone: 419 248 8008Telex: 286494FAX: 419 248 4236

NA 52

Ardrox - Cwc921 Sherwood Drive, P.O.Box 215Lakebluff, IL 60044-0215Phone: 708 295 1660FAX: 708 295 8748

NA 53

Snap - On Tools Company10035 Lakeview AvenueLenexa, KS 66219Phone: 800-947-7788Fax: 913-492-6079

NA 54

Avesta Stainless835 SelkirkPoint Claire, Quebec, Canada H9R3S2Phone: 514 694 8524FAX: 514 694 6683

NA 55

Avesta Stainless Inc1415 Bonhill Road, Unit17Mississauga, Ontario l5t1r2, CanadaPhone: 800 677 0620Telex: 3029,501-185FAX: 416 673 0649

NA 56

Champion Welding Products IncShoreway Industrial Park7619 Detour Ave.Cleveland, OH 44103Phone: 800 321 9353Telex:751-761CWPIFAX: 216 531 8066

NA 57

Thyssen Specialty SteelsThyssen Edelstahlwerke AgThyssen Draht Ag365 Village DriveCarol Stream, IL 60188Phone: 800 323 1233Telex: 21-0081FAX: 630 682 3428

NA 58

Furon, Chr DivisionP.O. Box 1911, 407 East StreetNew Haven, CT 06511Phone: 203 777 3631FAX 203 787-1725TWX: 7104650264


51-77-00

February 29/04

Table 6: United Kingdom Suppliers (UK)

SUPPLIERSCODE SUPPLIERS ADDRESS

UK 1British Oxygen Co. LTDHammersmith HouseLondon, W.6

UK 2

Brent Europe RidgewayIverBuckinghamshire, SLO 9JJPhone: 0753 630200 3Telex: 84769FAX: 0753 652460

UK 3PTS Edmonds, LTDOxford St. Industrial Estate BilstonStaffordshire WV14 7LF

UK 4

Med-Lab LTDCopeland St.Derby DE1 2PUPhone: 0332 49094Telex: 377347

UK 5Air Products LTDAcrefair, WrexhamGLWYD LL14 3HW

UK 6 D.A. Stuart Oil CoLincoln St. Woverhampton, WV10 ODZ

UK 7

Lambson LTDAir and Caldor WorksCinder LaneCaslefordPhone: 0977 510511

UK 8

MDS LTDUnit 4 Unity CourtBroadmead LaneKeyenesham, Bristol BS18 1FTPhone: 0272 864181FAX: 0272 868522

UK 9

Washington Mills Electro Minerals LTDMosely Rd, Trafford ParkManchester, M17 1HPPhone: 061 848 0276Telex: 666081FAX: 061 872 3974

UK 10English Abrasives and Chemicals, LTDP.O. Box 85 Marsh Ln,Tottenham London N17 OXAPhone: 081 808 4545 FAX: 081 801 2256


51-77-00February 29/04


UK 11

K & K Horgan, LTD Nelson RdGateshead Tyne-and-Wear NE10 0EWPhone: 091 478 7878Telex: 537918FAX: 091 490 0291

UK 12

ICI Chemicals and Polymers, LTDP.O. Box 14The Heath, Runcorn, Chesire WA7 4QGPhone: 0928 514444FAX: 0928 581072

UK 13Bostik LTDUlverscroft RdLeicester, LE4 6BWPhone: 0533 510015

UK 14

McGean-Rohco, LTDCeeBee Products DivisionQualcast Rd, Lower Horsely FieldsWolverhampton, West Midlands WV10 0DEPhone: 0902 451312Telex: 339188FAX: 0902 457442

UK 15C.E. Ramsdon & Co., LTDFoley Colour & Chemical WorksFenton, Staffordshire

UK 16

W. Canning Co., LTDGreat Hampton St. P.O. Box 288Birmingham B18 6ASPhone: 021 236 8621Telex: 337441FAX: 021 236 0444

UK 17

3M UK, PLC28 Great Jackson StManchester M15 4PAPhone: 061 236 8500Telex: 667510 MMMMan GFAX: 061 237 6136

UK 18

Turco Chemical products, LTDBrunel RdCorby, Northants NN17 2JWPhone: 0536 63536Telex: 342524FAX: 0536 63890

UK 19

Eutectic Co., LTDBurnt meadow RdRedditch B98 9HZPhone: 0527 517474FAX: 05427 517468


51-77-00

February 29/04


UK 20

Abrasive Development LTDNorman House, High StSolihul, Warwickshire B95 5AHPhone: 0564 792231FAX: 0564 793079

UK 21Universal Grinding Wheel Co., LTDDoxey RdSharples, Stafford ST16 1EA

UK 22De-Soto TitanineDarlington Rd.Shildon Co. Durahm DL4 2OP

UK 23The British Drug Houses, LTDBDH Laboratory-Chemical DivisionPoole, Dorset Birbeck StLondon E2 SJW

UK 24

Indestructable Paint Co., LTD25 Pentos DrBirmingham, B11 3TAPhone: 021 702 2485Telex: 338024 Bircom GFAX: 021 778 4338

UK 25

Henckel ChemicalsHenckelhouse292-308 Southbury RdEnfield, Middlesex EN1 1TSPhone: 081 804 3343Telex: 922708FAX: 081 443 2777

UK 26

Atochem LTDColthrop LnThatcham Bershire RG13 4LWPhone: 0635 70000Telex: 847689FAX: 0635 61212

UK 27Allchem LTDWingate CloseGlaisdale Drive East Nottingham, NG8 4LP

UK 28

Aero Consultants, LTDStonehillStukeley Meadowes Industrial EstateHuntingdon, Cambs PE18 6EDPhone: 0480 432111

UK 29

Deloro Stellite LTDSwindon RdStratton St., MargaretsSwindon, Wiltshire SN3 4AQPhone: 0793 822451FAX: 0742 540250


51-77-00February 29/04


UK 30

Hodge Clemco, LTDOrgreave DrHandlesworth, Sheffield S13 9NRPhone: 0742 540600Telex: 54116 ClemcoFAX: 0742 540250

UK 31

Green Grove Welding Wire LTDRegal RdWarks CV37 0AZPhone: 0789 68017Telex: 311434FAX: 0789 297238

UK 32

Haynes International, LTDP.O. Box 10 ParkhouseSt. Manchester M11 2ERPhone: 061 223 5054Telex: 667611FAX: 061 223 2412

UK 33

Nottingham Abrasives LTD3-5 Charles St.Ruddington, Nottingham NG11 6EGPhone: 0602 844822FAX: 0602 848108

UK 34Electromark LTDHarlequin AveGreat West Rd Brentford, MiddlesexPhone: 081 560 2224

UK 35

Potters Bllontini LTDPonterfract Rd.Barnsley S71 1HJPhone: 0226 287591Telex: 54604 Poters GFAX: 0226 207615

UK 36

Norton AbrasiveWelwyn Garden CityHertfordshire, AL7 1HZPhone: 0707 323484Telex: 267291FAX: 0707 325231

UK 37

Owens Corning Fiberglass, LTDCrossways, Stillwood Rd.Sunning Hill, Ascot Berkshire, SL5 OPYPhone: 0990 24888FAX: 0990325751


51-77-00

February 29/04


UK 38

Whitton Surface Dynamics LTD74 Market StreetCheltenham, Gloustershire, Gl50 3NHPhone: 0242 221978Telex: 437280FAX: 0242 224356Telex: 847566FAX: 0990325751

UK 39

Aeroquip, U.K. Operations, Aerospace DivisionStudley RoadRedditch, Worchestershire, B98 7HQPhone: 0527 20292FAX: 0527 29603

UK 40 Ferranti Denis Meters LTDBangor, Gwynedd, Ll57 48P

UK 41

Tilghmans Wheelabrator LTDP.O. Box 60,Broadheath, AltrinchamCheshire, WA14 5epPhone: 061 928 6388Telex: 668945 TILMAN GFAX: 061 941 7309

UK 42

Fothergill Engineered FabricsP.O.Box 1Summit, LittleboroughLancashire, OL159QTPhone:070672414Telex:63245FOTHGLFAX:070670555

UK 43

Products Research And Chemical (U.K.) LTD,Portland RoadNewcastle-Upon-TyneTyne And Wear, NE21BLPhone: 0912325151Telex: 53572FAX: 0912321845

UK 44Johns Manville,Great Britain Limited20 Albert Embankment, London, S.E.1

UK 45

Johnson Matthey PLCMetal JoiningOrchard RoadRoyston, Hertfordshire, SG85HEPhone: 0763244616Telex: 817351FAX: 0763248816


51-77-00February 29/04


UK 46

Dasic InternationalWinchester HillRomsey, Hampshire SO517YD,Phone: 0749512419Telex: 4754 8dasicgFAX: 0794522346

UK 47

Novamex Technologies LTDBroad MarchDaventry, Northant SNN 114HEPhone: 0327310230FAX: 0327310232

UK 48

Vacublast LTDWoodson HoAjax Avenue Trading EstateSlough, Buckinghamshire, SL1 4DJPhone: 753526511Telex: 848183FAX: 753538093

UK 49 Rolls Royce PLCDerby, DE2 8BJ

UK 50Dendix Gem Brushes LTDLower Church StreetChepstow, Gwent NP6 5XTPhone: 02912-5181

Table 7: European Suppliers (EU)


EU 1

NV Brent SA3B WondelgenstraatB9910 MariakerkeBelgium

Ardrox, SA2 Rue MeissonierParis 17E France

Brent ChemicalsGmbh 6073 Egelsbach FlugplatzPostfach 1245Germany

Brent S.R.I.Apartado 53Torrejon de ArdozMadrid, Spain

AB YtmetoderBox 26184 00 AkersbergaSweden


51-77-00

February 29/04


EU 2Turco-France SA 3Et 5 Impasse Du Quai L’Industrie91200 Athis-Mons (Essonne)France

EU 3

Turco-Chemie, GmbhPostfach 3233Wandsbeker Stieg 232000 Hamburg 76GermanyPhone: 40 2516 080FAX: 40 2516 0580

EU4

Turco-Italiana SPA1 Via Artigionale 2925010 Montirone (Brescia)ItalyPhone: 030 267 444FAX: 030 267 7137

EU 5

Roberts International TradingP.O. Box 43-4840AA Prinsenbeck, NetherlandsPhone: 076 414264FAX 076 420639

EU 63M Company,UsineBoitepostale 183Tilloylescambrai, France

EU 7

Furon Chr Europe BvIndustrieweg 9P.O. Box 124, 7460 A.CWeirden, Netherlands

EU 8

Aero Quip S. AAerospace Division14 Ru De MorvanSilic 507-94623 RungisCedex, France

EU 9

Esab AbP.O. Box 8004,S-402 77Goteborg, SwedenPhone: +46(31)50.90.00Telex: 8206050Fax: +46(31)50.94.80

EU 10

Filarc Welding Industries, B.VP.O. Box 80863503 RbUtrecht, The NetherlandsPhone: +31(30)465.911Telex: 70749


51-77-00February 29/04


EU 11

La Soudure Autogene Francaise13-17 Rue D’ Epluches95310 Saint Ouen L’aumoneFrancePhone: +33(1)34.21.33.33Telex: 607473fFax: +33(1)34.21.31.24

Table 8: Australian Suppliers (AUS)


AUS 1Ardrox Australia Pty LTD43 Forge St.Blacktown NSW 2148

AUS 2Ajax Chemicals P.O. Box 239Factory St. GranvillePhone: 02 682 1400FAX: 02 682 6771

AUS 3

Industrial Plastic AbrasivesLeecroft ChambersLincoln RdMasterdon, New ZealandPhone: 64 59 88378

AUS 4

Dow Corning Australia Pty LTD4 Ray RoadEpping N.S.W 2121AustraliaPhone: 612 868 9111Fax: 612 868 1507

AUS 5

The Lincoln Electric Company(Australia) Pty Ltd35 Bryant StreetPadstow,1 NSW2211AustraliaPhone: +61(2)772-7222Telex: AA22792Fax: +61(2)7921387

AUS 6

Weld Well (Nz) , LTDP.O. Box 749Napier, New ZealandPhone: +64(070)353.339Telex: NZ3543Fax: +64(070)354.568

3. Material Listings

The materials listed are in common use throughout the aviation industry, worldwide.

The information in the following tables was obtained from various domestic and foreign sources.Gulfstream assumes no responsibility for the accuracy of the listings. Gulfstream approval for specificproducts is neither intended nor implied.


51-77-00

February 29/04

All manufacturers’ recommendations regarding use of their product must be followed. Local environmentalregulations may prohibit use of certain chemicals and compounds.

The suppliers listed in Supplier Listings, 51-77-00, General should be consulted regarding the currentavailability of the products listed.

See Table 9 for process and cleaning materials.

See Table 10 for welding, brazing and metal spraying.

See Table 11 for polishing and dressings.

See Table 12 for processing sundries.

See Table 13 for bonding, adhesives and sealants.

See Table 14 for general stores.

Additional information regarding U.S. and foreign sources of products qualified to the Military, Federal, AN,MS, NAS, SAE, etc. standards and specifications listed, may be obtained from the current edition of:

The Identified Sources of SupplyThe SourceNational Standards Association5161 River Rd.Bethesda, MD 20816

Table 9: Process and Cleaning Materials

ITEM MATERIAL SPECIFICATION CODE TO SUPPLIER

1 Solvent Stoddard solvent Type 1 to ASTMD484

UK 4,NA 6, 20Local purchase

2 Sodium hydroxide NaOH Commercial grade UK 4, NA 6, 20Local purchase

3 Sulfuric acidH2SO4

SG 1.84 Commercial grade B, BS753

UK 4, 23, NA 6, 20Local purchase

4Chromium trioxideCr03Chromic acid

99.5% Pure Flake BDH 27762 UK 4, 23, NA 6, 20Local purchase

5 Phosphoric acidH3PO4

SG 1.65 UK 4, NA 6, 20Local purchase

6 Sodium carbonateNa2CO3

Technical grade BS 2867:1957 UK 4, NA 6, 20Local purchase

7 Sodium metasilicateNa2SiO3 -5H2O Technical grade

UK 4, 23,NA 6, 30Local purchase

8 Nitric acidHNO3

BDH 27500 GPR UK 4, 23, 24,NA 6, 30

9 Alkali additive Androx 690AAUK 2, 4, NA 18, 21,EU 1AUS 1

10 Methyl Ethyl Ketone (MEK)CH3CO-C2H5

Androx 2106UK 2, 4, 23, 24,NA 30Local purchase


51-77-00February 29/04


11 Abrasive medium

Aluminum oxide52-100 meshBS and USASieve 300-150 microns

UK 4, 21NA 2, 16

12 Abrasive medium


UK 4, 9, 21NA 9, 16

13 Abrasive medium


UK 4, 9, 20, 21NA 9, 16

14 Acetone (CH3)2CO Commercial gradeBDH 26287 / 27023

UK 4, 23, 24NA 6, 30Local purchase

15 Cold paint stripper Androx 20AFS 1426

UK 2, 4NA 19, 20EU 1AUS 1

16 Cold paint stripper Androx 2106

UK 2, 4NA 19, 20EU 1AUS 1

17 Cold paint stripper CeeBee A292 UK 14NA 8

18 Cold paint stripper Ardrox 204

UK 2, 4NA 18, 21EU 1AUS 1

19 Hydrofuoric acid Commercial grade30% w / w HF

UK 4;NA 6, 20Local purchase

20 Alkali deruster Ardrox 185Def Stan 03-2

UK 2, 4NA 18, 21EU 1AUS 1

21 Alkali deruster Ardrox 1854

UK 2, 4NA 18, 21EU 1AUS 1

22 Alkali deruster Turco 4781-7

UK 18NA 17, 20;EU 2, 3, 4AUS 1

23 Alkali deruster CeeBee C-180UK 4; 14NA 8, 20Local purchase

24 Alkali deruster Corposol AerodipUK 4, 25NA 10Approved local agent

25 Alkali Deruster Wyandotte Ferlon NA 11Approved local agent


51-77-00

February 29/04


26 Alkali deruster Cannings 3457 UK 4, 167NA 4

27 Alkali deruster CeeBee J84A UK 4, 14NA 8

28 Alkali deruster MSC Rust - Off UK 4, 8

29 Alkali deruster HTP1150 NA 29

30 Alkali deruster HTP1150L NA 29

31 Abrasive medium240 silicon carbide gritFEPA 33-GB or ANSI B74-12grade 240

UK 4, 9, 20, 21NA 11, 16Local purchase

32 Abrasive mediumAluminum oxide 20 gradeCSS.12, FEPA 32-GB orANSI B74-12 grade 20


33 Flux removing solution FerrocleneUK 4, 6NA 22Local purchase

34 Soft abrasive medium Plumstone No.3 UK 4; NA 6, 20Local purchase

35 Soft abrasive medium Walnut shellsUK 4, 48NA 6, 20Local purchase

36 Tribasic sodium phosphateNa3PO412H2O O-S-642, ASTM D 538

UK 4NA 6, 20Approved local agent

37 Isopropyl alcohol GPR BDH 29694 or TT-I-735UK 4, 23NA 30Local purchase

38 Ligno-Cellulose grit Turco Softblast 14 / 25MIL-G-5634

UK 4, 18NA 17, 20EU 2, 3, 4;AUS 2

39 Ligno-Cellulose grit Dasic Paint Blast UK 46

40 Paint stripper Turco F.R. Conditioner No. 2

UK 2, 4NA 17EU 2, 3, 4AUS 1

41 Paint stripper Ardrox 29

UK 2, 4NA 18, 21EU 1AUS 1

42 Tri-sodium phosphateNa3PO4 and (H2O)12

BDH 30193 orO-S-642

UK 4, 23NA 30Local purchase

43 Phosphoric acidH3PO4

SG 1.75GPR BDH29420 orO-O-670


44 Sodium dichromateNa2Cr207 2H2O

GPR BDH39130 orO-S-595



51-77-00February 29/04


45 Organic paint stripper Ardrox 26HTDTD 900 / 4968

UK 2, 4NA 18, 21EU 1AUS 1

46 Organic paint stripper Wyandotte 7219T NA 11, 20

47 Acidic descaler Ardrox 1871

UK 2, 4NA 18, 21EU 1AUS 1

48 Acidic descaler CeeBee J3 UK 14NA 8

49 Acidic descaler Ardrox 1873

UK 2, 4NA 18, 21EU 1AUS 1

50 Sulfuric acidH2SO4

SG 1.49 -1.50Commercial gradeBS 753

UK 4NA 6Local purchase

51 Abrasive medium

Aluminum oxideBS Sieve No. 30-72Grade FEPAASTM 35-70

UK 4, 9, 20, 21NA 9, 16

52 Abrasive medium

Pink Aluminum oxide250-600 micronASTM C11Sieve Size 30 / 60 (CSS 12)

UK 9, 36

53 Abrasive medium

Aluminum oxide280 / 500 meshCSS.12 FEPA 33-GB, 280 GradeANSI B74-10, 320 Grade


54 Plastic blasting media

PolyplusMIL-P-85891 (AS)Type II or Type IV Grade A30 / 40 mesh

UK 29, 38NA 23EU 5Local purchase


Solid Strip Type LMIL-P-85891 (AS)Type II or Type IV Grade A30 / 40 mesh

UK 28, 38NA 24, 25, 26EU 5AUS 3

56 Plastic blasting mediaAerolyte MIL-P-85891 (AS)Type II or Type IV Grade A30 / 40 mesh



X-OFF Type IISFC1734MIL-P-85891 (AS)Type II or Type IV Grade A30 / 40 mesh

UA.30NA 28Local purchase

58 Paint stripper Turco 6453

UK 18NA 17EU 2, 3AUS 2

59 Aliphatic naphtha Technical gradeTT-N-95 Local purchase


51-77-00

February 29/04


60 Chemical conversion coating Alodine 600or MIL-C-5541, Class 3

NA 2Local purchase

61 Corrosion removing compoundPhosphoric acid base MIL-C-10578

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

62 Detergent, general purpose MIL-D-16791 Local purchase

63 Paint and lacquer removerSolvent type MIL-R-25134

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

64 Cleaning compoundAlkaline water base MIL-C-87936

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

65 Corrosion removing compound -Prepaint MIL-C-38334

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5

66 Cleaning compound - Solvent mixtures MIL-C-38736

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

67 Cleaning compoundAircraft surface MIL-C-43616

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

68Paint removerEpoxyPolysulfide, polyuethane

MIL-R-81249

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

69 Remover, acid activated amine-curedepoxy systems MIL-R-81903

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

70 Aircraft exteriorCleaning compound MIL-C-85570

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

71Cleaning compoundAircraft exteriorWater dilutable

MIL-C-87936

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

72 Aerospace equipmentCleaning compound MIL-C-87937

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS 1, 2

73 Pastic blasting media

J.P. MediaMIL-P-85891 (AS)Type II or Type IV Grade A30 or 40 mesh

UK 20Local purchase


51-77-00February 29/04


74 Ligna cellulose Turco Softblast45 / 60 Grade - CSS9

UK 4, 18NA 17, 20EU 2, 3, 4AUS 2

75 Acetone(CH3)2CO

Anlar gradeBDH 10003

UK 4, 23, 24NA 30Local purchase

76 Nitric acid(HNO3)

Anlar gradeS.G. 1.42 BDH 10168


77 Degreaser Turco 4228

UK 4, 18NA 17, 20EU 2, 3, 4AUS 2

78 Soda ashNA2CO3 Commercial grade

UK 4NA 6, 20Local purchase

79 Flux removing solution Genolite UK 4

80 Flux removing solution Deoxidene UK 4

81 Abrasive materials for blasting MIL-P-21380 Local purchase

Table 10: Welding, Brazing and Metal Spraying


1 Argon gas standard purity

Max impurity levels (ppm):Oxygen 10Nitrogen 30Water 8Hydrogen 5Hydrocarbons 1Carbon dioxide 1Carbon monoxide 1orMIL-T-18455orCGA G11.1 5


2 Argon gas high purity

Max impurity levels (ppm)Oxygen 4Nitrogen 15Water 4Hydrogen 5Hydrocarbons 1Carbon dioxide 1Carbon monoxide 1


3 Welding electrodeAluminum E5356 AWS A5.10

UK 4, 49NA 20, 56, 57EU 9, 11AUS 6

4 Welding filler wire nickel C 263Msrr. 9500 / 16

NA 56, 57EU 9, 11AUS 6Local purchase


51-77-00

February 29/04


5 Welding electrode, tungsten, pure,EWP AWS A5.12

NA 56EU 11Local purchase

6 Welding electrodeEWTh - 2

Product code: 37047000.0625 in. DiaAWS A5.12

UK 4, 19


Product code: 3702100 0.0938 in.Dia UK 4, 19





10 Welding electrodeEWTh - 2 AWS 5.12


11 Welding filler wire nickel base

Inconel 625MSRR 9500 / 237AM 5837AWS 5.14ERNiCrMo - 3MIL-E-21562

UK 4, 31, 32NA 5, 13, 31, 54, 55, 56, 57EU 9, 11Local purchase

12 Welding electrode tungsten / zirconiumEWZr AWS A5.12 NA 56

Local purchase

13 Welding electrodeE347 AWS A5.9

UK 4, 19NA 13, 54, 55, 56, 57EU 9, 11AUS 5, 6

14 Welding filler wireER347 AWS A5.9

UK 4, 19NA 13, 54, 55, 56, 57EU 9, 11AUS 5, 6

15 Welding electrodeMIL-347 MIL-E-19933

UK 4, 19NA 13, 54, 55, 56, 57EU 9, 11AUS 5, 6

16 Welding electrode, coveredER347-15 AWS 5.4

UK 4, 19NA 13, 54, 55, 56, 57EU 9, 11AUS 5, 6

17 Welding electrode, coveredMIL-347-15 MIL-E-22200

UK 4, 31NA 5, 13, 54, 55, 56, 57EU 9, 10, 11AUS 5, 6

18 Welding electrode nickel baseMIL-EN625 MIL-E-21562

UK 4, 31, 32NA 5, 13, 54, 55, 56, 57EU 9, 11

19 Welding filler wire, nickel baseMIL-RN625 MIL-E-21562

UK 4, 31, 32NA 5, 13, 31, 54, 55, 56, 57EU 9, 11

20 Welding electrode, nickel base EN625 AWS A5.14UK 4, 31, 32NA 5, 13, 31, 54, 55, 56, 57EU 9, 11


51-77-00February 29/04


21 Welding filler wire, nickel baseRN625 AWS A5.14

UK 4, 31, 32NA 5, 13, 31, 54, 55, 56, 57EU 9, 11

22 Welding electrode, nickel baseERNiCrMo-3 AWS 5.14

UK 4, 31, 32NA 5, 13, 31, 54, 55, 56, 57EU 9, 11

23Welding electrode, covered, nickelbaseMIL-IN12

MIL-E-22200

UK 4, 31, 32NA 5, 56, 57EU 9, 11Local purchase

24Welding electrode, covered, nickelbaseERNi-CrMo-3

AWS A5.11

UK 4, 31, 32NA 5, 56, 57EU 9, 11Local purchase

25 Helium BB-H-1168CGA G9.1 Local purchase

Table 11: Polishing and Dressing Table


1 Steel wire brush - fine Vertex 1491 / 33 A-A2516NSN 5130-00-555- 3377


2 Steel wire brush - med. Vertex 1491 / 50UK 4, 16, 3NA 4Local purchase

3 Rotary fiber brush Untreated TampicoGGG-W-301


4 Polishing compound Tripoli Lustre No. 501A UK 3, 4, 16; NA 4 Local purchase

5 Abrasive stone Medium India MF 244UK 3, 4NA 16, 20Local purchase

6 Wire brush GemAC7590X A-A-2516NSN 5130-00-435-4199

UK 3, 4, 16, 50NA 4Local purchase

7 Lapping compound Silicon carbide Type PWS 18 A-A-1203

UK 4Local purchase

8 Polishing compound Cannings SS;UK 4, 3NA 4Local purchase

9 Aluminum oxide abrasive tape Grit size 60 thru 100 A-A-1048 NA 16, 20Local purchase

10 Aluminum oxide abrasive paper Grade 36 thru 180 grit sizeA-A-1048

NA 16, 20Local purchase

11 Aluminum oxide abrasive clothGrade 220 thru 320 grit sizeA-A1048Grade 400 and 500 grit size



51-77-00

February 29/04


12 Silicon carbide paper disk Grade 150 thru 800 grit sizeA-A-1047


13 Garnet paper 40 thru 180 grit size A-A-1201UK 4, 9, 10, 36NA 16Local purchase

14 Abrasive tape Spiroband medium gradeA-A1048


15 Abrasive stone; silicon carbide FJF44 square fineSS-S736


16 Abrasive stone; silicon carbide FJF44 triangular fineSS-S736


17 Abrasive stone; silicon carbide FJF44 round fineSS-S736


18 Polishing compound MIL-B-16909 UK 4Local purchase

19 Polishing buff Hard feltGGG-W-301


20 Polishing bob Hard feltGGG-W-301


21 Abrasive grit Aluminum oxide FEPA 32-GB orANSI B74-12 A-A-1045

UK 4, 20NA 4

22 Rotary fiber brush Treated TampicoGGG-W-301


23 Wire brush - Nickel silver SuperfineCannings Vertex Type 1492 / 10,


24 Lapping paste Unirundum 400, 800 A-A-1203 UK 4, 21Local purchase

25 Wire wool Stainless steel A-A-1043 UK 4Local purchase

26 Brush, rotary Stainless steel A-A-1043UK 4, 16, 3NA 4Local purchase

27 Brush, hand Steel AC5AUK 3, 4, 16NA 4, 53Local purchase

28 Scotch brite MIL-A-9962

UK 4, 17NA 12EU 6Local purchase

29 Wire wool Aluminum A-A-1044 Local purchase


51-77-00February 29/04


30 Polishing compound MIL-P-6888 Local purchase

31 Brush, cleaning aircraft metalbrightning MIL-B-23958 Local purchase

32 Corrosion removing compound -phosphoric acid base MIL-C-10578

UK 2, 14, 18NA 8, 11, 17, 21, 32, 50, 52EU 1, 2, 3, 4, 5AUS.1, 2Local purchase

Table 12: Processing Sundries


1 Pumice powder 200 GradeSS-S-821

UK 4Local purchase

2 Brush Fiber 8X2 inch wide or CanningsNo. 621B


3 Marking Ink Ardrox 8386W

UK 4, 16NA 18, 21EU 1AUS.1Local purchase

4 Marking Ink Marko-Print metal marking ink UK 34

5 Stopping off compound; brush anddripping application

Turco Form maskTFM 539 BrushingTFM 5145 Dipping

UK 4, 18NA 17, 20AUS.2EU 2, 3, 4

6 Masking tape (alum. Foil) Scotch 425 DEF UK 4, 17NA 12, 20

7 Cloth Lint free cloth Local purchase

8 pH indicator paper BDH full range indicator paperBDH 31033 2R

UK 4, 23NA 31

9 Cheescloth, cotton CCC-C-440 Local purchase

10 Cloth, cotton CCC-C-458 Local purchase

11 Liquid nitrogen BB-N-411, Type II Local purchase

12 Sponge, synthetic L-S-626 Local purchase

13 Electro-plating tape (Vinyl) No. 470HH-T-0025

UK 4, 17NA 12, 20EU 6Local purchase

14 Masking tape (lead foil) No. 420HH-T-29

UK 4, 17NA 12, 20EU 6Local purchase

15 Masking tape, paint stripping No. 226, No. 425, No. 417MIL-T-23397

UK 4, 17;NA 12, 20EU 6Local purchase


51-77-00

February 29/04


16 Moisttener, sponge stick GG-M-571 Local purchase

17 Rags, wiping, cotton DDD-R-30 Local purchase

18 Cloth, cleaning, nonwoven CCC-C-46 Local purchase

19 Brush, cleaning H-B-531 Local purchase

20 Brush, acid swabbing A-A-289 Local purchase

21 Wheel, buffing and polishing GGG-W-301 Local purchase

22 Cloths, polishing CCC-C-441 Local purchase

23 Brush, acid swabbing H-B-643 Local purchase

24 Cloth, terry cotton MIL-C-1164 Local purchase

25 Brush, platers MIL-B-15319 Local purchase

26 Brush, cleaning MIL-B-43871 Local purchase

27 Polishing pad, nonmetallic MIL-C-83957 Local purchase

28 Pencil, aircraft marking MIL-P-83953 Local purchase

29 Cloth, cleaning, low lint MIL-C-84043 Local purchase

30 Cloth, lint free MIL-C-24671Superstrong 917

UK 50Local purchase

Table 13: Bonding, Adhesives and Sealants

ITEM MATERIAL MANUFACTURERSPECIFICATION CODE TO SUPPLIER

1 Brushable polysulfide sealingcompound Pro Seal 890 MIL-S-8802, Class A


2 Adhesive - Fire resistant thermalinsulation MIL-S-3316 Class 1, Grade B

UK 13, 17NA 3, 49Local purchase

3 Adhesive - Rubber base, generalpurpose MMM-A-1617, Type II

UK 13, 17NA 3, 49Local purchase

4 Adhesive EC-847HUK 17;NA 12EU 6

5 Brushable polysulfide sealingcompound

Pro Seal 870A MIL-S-81733, TypeI



51-77-00February 29/04

Table 14: General Stores


1 Tape, insulation, pressure sensitive MIL-I-15126, Type GFT

UK 17NA 12EU 6Local purchase

2 Tape, pressure sensitive thermalradiation resistant MIL-T-83284, Class 1

UK 17NA 12EU 6Local purchase

3 Adhesive, rubber wrap, syntheticsilicone Cohrlastic 7515 NA 35, 58

EU 6

4 Tape, identification, de-icing GAT535C12 NA 45

5 Tape, identification, air-conditioning GAT535C9 NA 45

6 Tape, identification, pneumatic GAT535C6 NA 45

7 Tape, pressure sensitive thermalradiation resistant No. 363

UK 17NA 12EU 6

8 Cloth, glass fiber MIL-Y-1140 Form 4, Class S No.120

UK 42Local purchase

9 Cloth, glass fiber GAC110J04 NA 45

10 Blanket, acoustical / insulation GAB105D1B NA 34

11 InsulationASTM C 800 Grade BASTM C 800 Grade A1.00 inch Thick

NA 39, 51Local purchase

12 Insulation, high tempMicro-Fiber FeltType 475; 0.500 thick 4 Lb / Ft3

DensityNA 39

13 V-band flanges

20045-XXXX20060-XXXX20070-XXXX20074-XXXX20075-XXXXR51AB3-XXXXXX

NA 36

14 V-band blanking flange platesC2710-XXXXR11A03-XXXXXXR22A04-XXXXXX

NA 36

15 15 O-ring seal S2X-XXXX NA 33

16 Plug, test M1239-XXXX NA 33

17 Plug, series 20 and 21 T1071-XXXX NA 33

18 Coupler assembly

CA33010XXCA33012XXCA33015XXCA33020XXCA33025XXCA33027XXCA33030XXCA34040XX

NA 33


51-77-00

February 29/04


19 Coupler

C30115XXC30120XXC30122XXC30125XXC30127XXC30130XXC30140XX

NA 33

20 Sleeve

G30010XXG30012XXG30015XXG30020XXG30027XXG30030XXG30040XX

NA 33

21 Nut

NA30115XXNA30120XXNA30122XXNA30125XXNA30127XXNA30130XXNA30140XX

NA 33

22 Retainer

RA30115XXRA30120XXRA30122XXRA30125XXRA30127XXRA30130XXRA30140XX

NA 33

23 Nut 3615-XX-3 NA 37

24 Nut assembly 12N36-XXX NA 38

25 Retainer 12R36-XXX NA 38

26 Retainer 3615-XX-19 NA 37

27 Washer 3615-XX-19 NA 37

28 Washer 12W36-XXX NA 38

29 V-band flange GAF530A-M300ANK170000-0400A

UK 30NA 45, 46EU 8

30 V-band flange MBF65202-250UK 39NA 45, 46EU 8

31 Flange, swaged

F30015AF30020AF30025AF30027AF30030AF20012CDF20015ADF1111-125F30-150F1041-150F1041-250F30012CL

NA 33


51-77-00February 29/04


32 Flange, butt welded

F30325-02-25F30330-02-25F31330-02-25F31330-02-28F31340-02-25F31340-02-28F30310A

NA 33

33 Aluminum alloy tube 5052 NA 42, 43, 44Local purchase

34 Aluminum alloy tube 6061 NA 42, 43, 44Local purchase

35 321 CRES alloy tube 321 NA 43, 44Local purchase

36 inconel 625 alloy tube ASTM B 444GMS 3009 NA 40, 41

37 Tool steel Stellite 6B UK 29NA 31, 48


51-77-00

February 29/04


THIS PAGE IS INTENTIONALLY LEFT BLANK

51-77-00February 29/04