glare - honeylite louvershoneylitelouvers.com/honeyliteproducts_all_pdfs.pdf999 montague street san...
TRANSCRIPT
GLARE
A D I V I S I O N O F B O R D E N L I G H T I N G
®
with Honeylite louver®
without Honeylite louver®
To see our complete product line visit
www.honeylitelouvers.com999 Montague St • San Leandro, CA 94577 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com
AbouT HoneyliTeHoneyCoMb: The "honeycomb" material that is the basis of our products was originally developed as a low density-high strength core for structural use, primarily for the aircraft industry. utilizing it's intrinsic characteristics, we have developed a family of effective and versatile glare control devices.
ReDuCe GlARe: Honeylite louvers help control brightness from a variety of light sources. Whether you are a lighting designer or a manufacturer, we can help you control glare. From MR11 point sources to studio high output fluorescent fixtures, we have louvers and accessories tailored to the application
leADTiMeS: Honeylite products are primarily produced on a made-to-order basis. While some popular products are available from stock, leadtimes range from 2-4 weeks and depend on quantities. Products like MR16 louvers and accessories are available typically in 2 weeks, while framed louvers made to a customer’s specifications have 4 week leadtimes.
CuSToM: We specialize in custom applications, so if you don't see what you need, contact us. our skilled craftspeople take pride in producing products with the highest quality of workmanship.
HoneyliTe bASiCSThe degree of cut-off or shielding is determined by the honeycomb cell diameter and depth, as shown below in the table and in the illustration at right. Specific products will require specific cell and depth dimensions. For example, an MR16 louver uses a 1/8" x .125 louver which gives a 45 degree cut-off. Consult the factory for special cut-off requirements.
note that because of the thin material used to make our louvers, all Honeylite louvers offer high "open area." This means you can achieve glare control with very little loss of light. open areas are shown in the table below.
Honeylite louvers and accessories are available in a Milbrite (Mlb) clear aluminum finish or black (blK). Machined parts such as an MR16 Holder have a black anodized finish. All other parts are coated with our proprietary polymer coating, borden black. our polymer coating chemically grafts to the substrate, has superior abrasion resistance while being able to withstand 350°F with no out-gassing and has very low VoC's. (note that some accessory parts are supplied with a finely textured powder coat.) Standard finish is eggshell.
TeMPeRATuRe liMiTATionS: Honeylite louvers can withstand temperatures up to 350°F, meeting the need of most lamp sources. operating at higher temperatures for extended periods of time will result in the louver blades separating.
GLARE
Degree of cut-off
45º
52.5º
60º
72º
louver
Cell DiAMeTeR Cell DePTHoPen AReA
1/8”
3/16”
1/4”
3/8”
Cut-off
.125
.187
.235
.375
45°
.250
52.5°
.250
.433
.375
60°
.750
95%
95%
95%
95%
Honeylite Products
A D I V I S I O N O F B O R D E N L I G H T I N G
®
MR11 SeriesMR16 Series
Snap-on Holdersfor PAR lamps
lP Series
lens forMR and PAR lamps
louvers for ARlamps
AR Series
louvers withSpring Clip
l Series
Sconce louvers
Sl Series
FramedCustom louvers
Custom
MR16 Clip-on HolderMR Series
Accessories
To see our complete product line visit
www.honeylitelouvers.com999 Montague St • San Leandro, CA 94577 • ph 510.357.0171 • fax 510.357.3832 • www.bordenlighting.com
Honeylite MR11 SeriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The MR11 Series is designed to provide glare control for the MR11 lamp. The louver is available separately or with the holder. The holder is designed to accommodate prismatic and glare control devices and give the lamp a finished appearance. (If both a louver and lens are specified, the holder is deeper.)
CAT# - LOUVER - LENS
HL-MR11 L-BLKL-MLB
CLLIPRSASO
HL-MR11 - L-BLK (louver only)HL-MR11 - H-MLB - L-BLK - SO(Holder, Louver & Softening Lens)
SAMPLE SPECS:
- HOLDER
H-BLKH-MLB
MR11Series
Lamp By Others
Holder Front Holder Back
Optional LensHoneylite Louver
Honeylite MR16 SeriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The MR16 Series is designed to provide glare control for the MR16 lamp. The louver is available separately or with the holder. The holder is designed to accommodate prismatic and glare control devices and give the lamp a finished appearance. The retaining ring is standard and secures the lamp. We also offer a variety of accessories such as rear lamp covers, baffles and barndoors.
CAT# - LOUVER - LENS
HL-MR16 L-BLKL-MLB
CLLIPRSASO
HL-MR16 - L-BLK (louver only)HL-MR16 - H-MLB - L-BLK - LI(Holder, Louver & Linear Lens)
SAMPLE SPECS:
- HOLDER
H-BLKH-MLB
MR16Series
Lamp By Others
Holder Front Holder Back
Optional LensHoneylite Louver
Retaining Ring
-
MR16 Clip-on HolderA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The Honeylite MR16 Clip-on Holder is a compact and economical solution to glare control. The metal holder clips on to the MR16 lamp and will hold either a Honeylite Louver or any lens. The holder provides a ventilation gap to reduce bulb temperature. Note that the holder will hold only one glare control device.
(Fixture shown for illustration only.)
Clip-on Holder with Honeylite® Louver
Clip-on Holder with Linear Lens
HL-MR16 - CH50-BLK - L-BLKHL-MR16 - CH50-GRY - PR
SAMPLE SPECS:
CAT# - CLIP-ON HOLDER - LENS
HL-MR11 CH50-BLKCH50-GRY
CLLIPRSASO
- LOUVER
L-BLKL-MLB
MR16 Series AccessoriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.comLamp Covers are intended to reduce the glare of backlight. They are offered in three styles as shown above and give the lamp a finished appearance. Covers can be used alone or in combination with the MR16 Holder and are available in Milbrite(MLB) or Black(BLK) finish. If a Holder is specified they can be combined with a Louver and a Lens.
HL-MR16 - HC-MLBSAMPLE SPECS:
LAMP COVERS
Perforated Cover shownwith ME16 Holder
Perforated Cover (PC)
Conical Cover (CC) Hemisphere Cover (HC)
CAT# - COVER
HL-MR16 PC-BLKPC-MLBCC-BLKCC-MLBHC-BLKHC-MLB
NOTE: To combine aCover with a Holder add the Cover suffix to theHolder spec:HL-MR16 - H-BLK - PC-BLK
MR16 Series AccessoriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The Honeylite Snoot traps all the peripheral light, concentrating the beam. Snoots require a holder and are available in a Milbrite (MLB) or Black Satin (BLK) finish.
SNOOTS
MR16 shown withMilbrite Holder and Snoot
HL-MR16 - H-MLB - SN-MLBSAMPLE SPECS:
CAT# - HOLDER
HL-MR16 H-BLKH-MLB
- SNOOT
SN-BLKSN-MLB
MR16 Series AccessoriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The Glass Shade accessory makes a decorative element out of a bare lamp, at the same time it blocks lamp back light. Glass shade comes with a stainless steel retainer ring that secures the shade and/or baffle.
Note: Glass Shades are only available in Deep Blue.
GLASS SHADES
Glass Shadeshown with Baffles
HL-MR16 - GS - BB-GRYSAMPLE SPECS:
CAT# - GLASS SHADE
HL-MR16 GS
- BAFFLE
BB-BLKBB-GRY
Glass Shadewith retaining clip
MR16 Series AccessoriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
Clip-on Barndoors trap peripheral sideways light and add visual interest. The clip-on Baffle also limits peripheral sideways light with a different style of device.
Barndoors are adjustable by rotation and by bending the “living hinges”. Note that they may be doubled-up to provide 4-way glare control. Available in Fine Textured Matte Black (BLK) or Matte Grey (GRY)
BARNDOORS
HL-MR16 - BD-BLKSAMPLE SPECS:
CAT# - BARNDOOR
HL-MR16 BD-BLKBD-GRY
NOTE: To double-upsimply order a qty ortwo (2) for each lamp.
MR16 Series AccessoriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
Clip-on Baffles can be ordered as separate glare control devices or can be combined with a barndoor, as show above right. Available in Fine Textured Matt Black (BLK) or Matte Grey (GRY)
BAFFLES
HL-MR16 - BB-GRYSAMPLE SPECS:
CAT# - BAFFLE
HL-MR16 BB-BLKBB-GRY
NOTE: To combine a barndoor with a baffle add a suffix.SAMPLE SPEC: BD-BLK - BB-BLK
Honeylite LP SeriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The Honeylite LP Series are designed to snap-on to PAR lamps, including the Designer 16 lamp. All LP Series are supplied with a 1/4 x 235 louver for 45° cut-off. Holders are made from cold-rolled steel. The holder and louver are finished with our black proprietary polymer coating in an eggshell finish. All LP Series (except for the LP16) will accommodate a lens, for additional light control. Note all lamps shown are by others.
LP16
Designer 16
OD 1.96” DEPTH .56”
LP20
PAR 20
OD 2.7” DEPTH .87”
LP30
PAR 30
OD 4.0” DEPTH 2.0”
LP38S
PAR 38
OD 5.0” DEPTH 1.33”
LP38
PAR 38
OD 5.0” DEPTH 2.0”
CAT# - LOUVER - LENS
HL-LP16-BLKHL-LP20-BLKHL-LP30-BLKHL-LP38-BLKHL-LP38S-BLK
L-BLKL-MLB
CLLIPRSASO
HL-LP30-BLK - L-BLKHL-LP38S-BLK - LI
SAMPLE SPECS:
* a shallower design that exposes more of the lamp
-
Optional LensesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
Used with Honeylite holders our tempered glass lenses provide a safety shield and produce softening, spreading or diffusing effects. These lenses are available for the MR11, MR16, MR16 Clip-on and LP Series holders. The lenses can also be purchased separately.
Clear Lens (CL)
Used as a safety shield
Linear Lens (LI) Elongates light distribution pattern
Prismatic Lens (PR) Establishes symmetrical pattern
Sanded Lens (SA) Sandblasted surface, diffuses light pattern
Softening Lens (SO)
Pressed texture softens light pattern
Lens Sizes
Lamp MR11 MR16 PAR16 PAR20 PAR30 PAR38
Lens Diameter 1.37” 1.96” 1.96” 2.50” 3.75” 4.31”
Honeylite AR SeriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The Honeylite AR Series provides solutions to the spill light that is inherent in most aluminum reflector (AR) lamps.
HL-MR16 - L-BLK (louver only)HL-MR16 - H-MLB - L-BLK - LI(Holder, Louver & Linear Lens)
SAMPLE SPECS:
The SC-AR111 louver is a compact solution to glare control. This louver which is secured, with stainless steel spring clips, is easy to install.
This product has an international patent.
Note that this louver cannot accept a lens.
SC- AR111
Lamp By Others
Retaining RingLP- AR111
Holder & Louver
OD 1.96” DEPTH .56”
This snap-on holder and louver is similar to our LP Series for PAR lamps and covers the lamp for a finished appearance. Holder is made from cold-rolled steel and come with our black proprietary polymer coating with an eggshell finish.
Holder is made from machined aluminum and is available in a Milbrite or Black Satin finish.
Lamp By Others
Retaining Ring
LP- AR70 OD 1.96” DEPTH .56”
Holder Back Holder Front
Honeylite Louver
CAT# - LOUVER - LENS
HL-SC-AR111-BLKHL-SC-AR111-MLBHL-LP-AR111-BLKHL-LP-AR111-MLBHL-LP-AR70-MLBHL-LP-AR70-MLB
L-BLKL-MLB
CLLIPRSASO
-
Honeylite L SeriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
Honeylite L Series Spring-Clip Louvers are lightweight and economical. These louvers have 95° open area and are available with 45° or 60° cut-off. (Refer to Honeylite Basics.) L Series louvers are for use with a variety of fixtures or recessed fixtures. Frames are made from 1/2” cold-rolled steel and have 3 spring clips as shown, for easy installation.
Standard finish is our black proprietary polymer coating with an eggshell finish.
HL-L4245 - 45HL-L4750 - 60
SAMPLE SPECS:
CAT#CAT# - DIA (in) - CUTOFF
HL-L2730HL-L3537HL-L4042HL-L4245HL-L4447HL-L4750HL-L5557HL-L6062HL-L6366HL-L6668
For 45° cut-off cell depth is .235” for 60° cut-off cell depth is .433” specify cut-off by adding suffix of 45 or 60.See Sample Spec below
2.653.253.624.004.254.625.255.626.256.62
- FIT RANGE
2.7 - 3.03.5 - 3.74.0 - 4.24.2 - 4.44.4 - 4.74.7 - 5.05.5 - 5.76.0 - 6.26.3 - 6.66.6 - 6.8
-
Honeylite SL SeriesA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
The Honeylite SL Series framed louvers are designed to fit into the top of wall sconces. The 45° cut-off blocks sightlines from elevated viewing angles. In addition to the louvers listed below, custom louvers can be manufactured for round, partial round, square and rectangular sconces.
See Custom Louvers.
Standard Finish is our black proprietary polymer coating with an eggshell finish.
CAT#
HL-SL12 (Fits 12” Sconce)HL-SL14 (Fits 14” Sconce)HL-SL18 (Fits 18” Sconce)
-
Custom LouversA D I V I S I O N O F B O R D E N L I G H T I N G
®
999 Montague Street San Leandro, CA 94577
phone 510.357.0171fax 510.357.3832
www.honeylitelouvers.com
Honeylite Louvers produces a variety of custom framed and unframed louvers made to the requirements of light fixture manufactures. All these louvers are designed to reduce glare and control light from the source.GLARE
Call our factory to discuss your specific requirements.