global-geotech-brochure[1]
TRANSCRIPT
PRODUCT CATALOGUE 04/06
Thank you for your interest in our company and our products.
Global Geotech designs, manufactures and supplies soil and rock samplingequipment for the geotechnical and geo-environmental industries. We arefocusing our efforts on improving existing drilling tools by better design, orby using better materials, as well as introducing new, innovative products tothe industry.
As manufacturing our own equipment, Global Geotech, as our name sug-gests, sources and supplies geotechnical equipment on a worldwide basis.
This leaflet briefly outlines some new products available from our company,but please do not forget we can offer a much broader range of productsthan illustrated here.
If you require any information about our products or their applications,please do not hesitate to contact us. We will be more than happy to helpwith technical advice, consultation, and training.
Product/ServiceInformation
Organization
Soil & RockSampling Equipment
Phone: +44 (0)1422 373213Fax: +44 (0) 1422 370864Email: [email protected]
Steel Casings for Rotary andPercussive Drilling
Shell & Auger Casing & ToolsCore Barrels –DCDMA, Metric
& WirelineDrill RodsT.C. and Diamond Drill Bits and
Core BitsSteel Tooth and T.C.I. Tricone
Roller BitsDrag BitsStabiliser SubsNon-Return ValvesSPT EquipmentUndisturbed Soil Sampling
EquipmentU100, Piston Samplers and
Shelby TubesMini Rigs for Soil SamplingWindow and Windowless Sample
TubesPlastic LinersFoot Clamps, Bowls and Slips,
Casing ClampsHeavy Duty Pipe and Chain
WrenchesAdaptorsInstallation Equipment –PVC
pipe, piezometers, wellcaps etcBorehole packersRecovery tools
Product Range
Global Geotech is a specialist manufacturer andsupplier of high quality earth drilling, boring, samplingand in-situ ground testing equipment, delivering toworldwide markets. Our customers includegeotechnical and environmental consultants, civilengineering companies, drilling contractors, mineraland hydrogeologists, both large and small.
Our uncompromising commitment to quality products,constant innovation and superior customer serviceallows us to meet the highest performance standardsand satisfy the requirements of the world's mostdemanding civil engineering and exploration projects
Our product range includes equipment for obtaininggeological samples and carrying out in-situ tests in awide range of geological formations, from the softestsoils to the hardest rocks:
Undisturbed soil sampling equipment - piston samplers,shelby tubes and U100 samplersIn-situ soil testing equipment - dynamic probe, standardpenetration test, shear vane apparatus, hand augers, dipmeters, piezometersPercussive soil coring - window samplers and drive-in tools
Mini-tracked drive sampling rigs - the new "GEO" rig
Rotary coring equipment - core barrels, drill rods and casing
Diamond drilling equipment - core bits and drill bits innatural, synthetic diamond and PDC typesDown-the-hole hammers, bits and overburden drillingsystemsWaterwell drilling equipment - shell and auger casing andtoolsOpen hole-drilling - tricone rock bits and drag bits
Borehole packers - for permeability testing and grouting
Sub adaptors, recovery tools, casing clamps, water swivelsand hoistsSpecial drilling products tailored to customer requirements
The company is located in Elland, West Yorkshire asmall town in the north of England, at the foot of thePennine hills. The nearest large cities are Manchester,40 miles to the west, and Leeds 20 miles to the east.
Situated just 1 mile from the motorway network and40 minutes away from Manchester Airport, we are wellplaced to respond rapidly to your enquiries and toexpedite delivery of your equipment, either nationallyor internationally.
Why Global Geotech?
Global Geotech offers an absolute commitment toquality products combined with a personal "dowhatever it takes" approach to customer service thatsets us apart from the competition and makes us yourbest choice for all kinds of drilling solutions. Here aresome of our qualities:-
Experienced engineers and technical staff withdecades of collective experience.Continuous field testing and development of ourproducts to understand and solve the problems
faced by field engineers every day.Rigorous quality controlsKnowledgeable, friendly sales staff who aretrained and capable of dealing with any situationClose, personalized relationships with everycustomerA commitment to on-time delivery every time anorder is placed.
GLOBAL GEOTECH OFFERS MORE THAN JUSTA DRILLING TOOL!.
Global Geotech, Unit C Lowfields Business Park, Old Power Way, Elland, HX5 9DE, U.K.Tel: +44 (0)1422 373213 Fax: +44 (0)1422 370864 Email: [email protected]
© 2005 Global Geotech. All Rights Reserved
Diamond and T.C. Bits
Global Geotech manufactures and supplies a complete range of diamond bits, casing shoes, reamingshells to suit all popular core barrels and casing types. These may be surface set, impregnated,sawtooth or in various PDC forms, depending on the application.
Surface Set Diamond BitsThese are mostly suited to soft formations or using low powered drills, asthey operate more effectively than impregnated bits at low surface speeds.Available with different stone sizes, face profiles and waterwayarrangements to suit different conditions. All supplied with the highestquality natural drilling diamonds.
Impregnated Diamond BitsImpregnated bits can drill a broad range of formations from the softest tothe hardest rocks. Manufactured with very small, high quality syntheticdiamonds, mixed evenly through a metal alloy matrix. All bits have T.C.and diamond gauge protection. Available in 8 standard matrix types to suitrock formation.
Sawtooth Diamond BitsA very aggressive bit design for rapid penetration in soft to medium rock types. Theteeth are shaped from tungsten carbide matrix, with their cutting edges reinforcedwith natural carbonado and West African type diamonds. These bits function in muchthe same way as T.C. bits but with much superior wear resistance.
PDC bitsPolycrystalline diamond cutters are set on the crown giving a very long working life,very fast penetration and high percentage core recovery in soft to hard rockformations. The bit may be used with air, mud , or foam flushing.
Cube set bitsThese bits are set with thermally stable polycrystalline diamond cube-shapedcutters, forming a V-shaped cutting profile on the surface of the crown. Thesebits are extremely tough and will cope with massive or broken formationsfrom soft to hard, high abrasive groups.
Carbotec T.C. bitsThese bits consist of tungsten carbide fragments fused together to form acrown with multiple cutting edges. They are particularly effective for cutting informations which are highly fractured or contain loose pebbles, wherestandard T.C., bits would be susceptible to chipping or impact damage.
Casing shoes and Reaming ShellsAvailable in both tungsten carbide and diamond forms to suit most types of casing and core barrels.
Conventional Double Tube Core Barrels
Wireline Core Barrels
BIT DIMENSIONS: IMPERIAL SERIES
Conventional Double Tube Core Barrels
BIT DIMENSIONS: METRIC SERIES
These are identical to the standard Q series barrels but incorporate a third, split inner tube. This can be pumped out of theinner tube after retrieval, allowing the core to be examined in its in-situ state. Generally used when high quality core isrequired in broken, fractured formations. The use of a third tube requires the bits to cut slightly smaller diameter core thanstandard Q series barrels.
Wireline core barrels are primarily used when coring to greater depths, mainly because they eliminate the need to couple anduncouple the rod string each time the core is retrieved. An overshot device is dropped on a cable and directly couples onto theinner tube assembly, allowing fast retrieval of the core after each core run. Available in DCDMA sizes, A, B. H. Q. and P. Ageotechnical version of the wireline system is also available in S size, giving cores in excess of 100 mm.
TT Series Core Barrels
These are ultra thin wall core barrels available in diameters 46 and 56mm, suitable for underground mining operations. Thesecore barrels require relatively light feed pressure and torque, which means that they cut effectively at high rotation speedsusing lightweight diamond drills.
T2 Series Core Barrels
T6 Series Core Barrels
The T6 series is a continuation of the T2 series, but of a sturdier design, and available in larger diameters, 76, 86, 101, 116,131 and 146mm, suitable for general exploration purposes. Water, mud or air can be used as the flushing medium, but whenusing air, oversized bits and head couplings are recommended to allow sufficient space for the cuttings to clear. Designed foruse in conjunction with metric casing. The T6-H core barrel is the imperial sized equivalent of the T6-101, virtually identical indesign, but with a slightly smaller O.D. enabling it to fit inside HW or HX casing.
T6S Series Core Barrels
These core barrels have a split innert tube and are intended for use in geotechnical work in very loose formations. The splitinner tube combined with face discharge bits gives an undisturbed sample. Suitable for mud flushing and with minormodifications for air flushing. Currently the only sizes available are 116 and 131mm.
CORE BARREL SELECTION GUIDE
CONVENTIONAL DOUBLE TUBE CORE BARRELS
Q Series Wireline Core Barrels
These are thin wall core barrels available in diameters 46, 56, 66, 76, 86 and 101mm, suitable for general explorationpurposes. These core barrels have a relatively small cutting area and therefore permit rapid penetration, especially in harderrock formations. Water or mud flush is required. Designed for use in conjunction with metric casing. The TNW core barrel is theimperial size equivalent of the T2-76, virtually identical in design, but with a slightly smaller O.D. enabling it to fit into NW orNX casing.
WF Series Core Barrels
These are geotechnical core barrels, available in DCDMA sizes H, P and S. They are primarily designed for coring relatively softformations using face-discharge core bits, with water or mud as the flushing medium. Problems may be encountered usingthese barrels in harder rocks due to the relatively large area of the bit face, which will slow penetration rate and cause fasterbit wear compared to equivalent sizes in T2 or T6 series. The head design is rather primitive and the bearings are exposed tothe flushing medium, therefore these core barrels need regular servicing and maintenance. They continued to be widely usedlargely due to clients wishing to specify hole and core sizes according to U.S. and U.K. standards.
Triple Tube Q3 Series Wireline Core Barrels
CONVENTIONAL TRIPLE TUBE CORE BARRELS
WIRELINE DOUBLE TUBE CORE BARRELS
WIRELINE TRIPLE TUBE CORE BARRELS
Triefus Series Core Barrels
These are geotechnical core barrels, designed to maximise core recovery in soft formations. It is sometimes possible to obtainnear 100% volumetric core recovery in the most undisturbed condition as is possible with rotary drilling. They are suppliedwith a third, split tube which is pumped out from the inner tube after recovery. Six standard sizes are available giving coresizes from 35 - 146 mm.
Item Description Qty Part No. Qty Part No. Qty Part No.
Complete corebarrel 1.5m long 638 640 642
Complete corebarrel 3.0m long 637 639 641
1 Inner tube 1.5m long 1 6383 1 6403 1 6423
Inner tube 3.0m long 1 6373 1 6393 1 6413
2 Outer tube 1.5m long 1 6382 1 6402 1 6422
Outer tube 3.0m long 1 6372 1 6392 1 6412
3 Blank reaming shell 1 6388 1 6408 1 6428
4 Extension tube 1 6374 1 6564 1 6414
5 Lifter case 1 6375 1 6395 1 6415
6 Corelifter 1 6376 1 6396 1 6416
7* Core Bit
8-17 Head assembly complete 1 6371 1 6391 1 6411
8 Corebarrel coupling 1 63711 1 63911 1 64111
9 Bearing shaft 1 63712 1 63912 1 64112
10 Bearing housing 1 63713 1 63913 1 64113
11 Washer 1 637141 1 639141 1 641141
12 Circlip 1 63715 1 63915 1 64115
13 Washers 1 637142 1 639142 1 641142
14 Set of adjusting washers 1 637143 1 639143 1 641143
15 Ball bearings 5 63716 6 63916 5 64116
16 Washer 1 637144 1 639144 1 641144
17 Lock-nut 1 63717 1 63917 1 63917
* Core Bit is not supplied with corebarrel and must be ordered separately.
Thread connection in corebarrel head 42 mm 50 mm 50 mm
Reaming shell outside diameter (mm) 46.3 56.3 66.3
56 66
Bit inside diameter (mm) 31.7 41.7 51.7
T2 DOUBLE TUBE CORE BARRELS
T2-46 T2-56 T2-66
Bit outside diameter (mm) 46
Item Description Qty Part No. Qty Part No. Qty Part No.
Complete corebarrel 1.5m long 647 652 657
Complete corebarrel 3.0m long 646 651 656
1 Inner tube 1.5m long 1 6473 1 6523 1 6573
Inner tube 3.0m long 1 6463 1 6513 1 6563
2 Outer tube 1.5m long 1 6472 1 6522 1 6572
Outer tube 3.0m long 1 6462 1 6512 1 6562
3 Blank reaming shell 1 64782 1 6528 1 6578
4 Extension tube 1 6464 1 6514 1 6564
5 Lifter case 1 6465 1 6515 1 6565
6 Corelifter 1 6466 1 6516 1 6566
7* Core Bit
8-17 Head assembly complete 1 6461 1 6511 1 6561
8 Corebarrel coupling 1 64611 1 65111 1 65611
9 Bearing shaft 1 64612 1 65112 1 65612
10 Bearing housing 1 64613 1 65113 1 65613
11 Washer 1 646141 1 651141 1 656141
12 Circlip 1 64615 1 65115 1 65615
13 Washers 1 646142 1 651142 1 656142
14 Set of adjusting washers 1 646143 1 651143 1 656143
15 Ball bearings 5 64614 4 65214 5 65614
16 Washer 1 646144 1 651144 1 656144
17 Lock-nut 1 64617 1 65117 1 65117
* Core Bit is not supplied with corebarrel and must be ordered separately.
Item Description Qty Part No. Qty Part No. Qty Part No.
TC Reaming Shell 6478 6529 6579
Diamond Reaming Shell 64781 6530 6580
TC Core Bit 6491 6541 6591
Impregnated Core Bit 6493 6548 6596
Surface Set Core Bit 6494 6545 6595
Cube Set Core Bit 6495 6547 6597
Full Circle Wrench - Inner Tube 64991 65491 65971
Full Circle Wrench - Outer Tube 64992 65492 65972
Accessories T2-76 T2-86 T2-101
T2 DOUBLE TUBE CORE BARRELS
Core Barrel Type T2-76 T2-86 T2-101
Bit outside diameter (mm) 76 86 101
Bit inside diameter (mm) 61.7 71.7 83.7
Reaming shell outside diameter (mm) 76.3 86.3 101.3
Thread connection in corebarrel head 50 mm 50 mm NW
Item Description Qty Part No. Qty Part No. Qty Part No.
Complete corebarrel 1.5m long 65982 66002 662
Complete corebarrel 3.0m long 65981 66001 661
1 Outer tube 1.5m long 1 65984 1 6604 1 6612
Outer tube 3.0m long 1 659841 1 6602 1 6614
2 Inner tube 1.5m long 1 65985 1 6605 1 6623
Inner tube 3.0m long 1 659851 1 6603 1 6613
3 Blank reaming shell 1 659881 1 66081 1 6628
4 Lifter case 1 65986 1 6606 1 6615
5 Corelifter 1 65987 1 6607 1 6616
6* Core Bit
7-21 Head assembly complete 1 65983 1 6601 1 6611
7 Corebarrel coupling 1 659831 1 66011 1 66111
8 Inner head 1 659830 1 66010 1 66110
9 Bearing housing 1 659832 1 66012 1 66112
10 Lock-nut 1 659833 1 66013 1 66113
11 Washer 1 6598341 1 660141 1 661141
12 Bearings 1 659835 1 66015 1 66115
13 Washers 1 6598342 1 660142 1 661142
14 Thrust bearings 1 6598343 1 660143 1 661143
15 Spacer 5 659836 6 66016 5 66116
16 Thrust bearings 1 6598344 1 660144 1 661144
17 Bearing shaft 1 659837 1 66017 1 65117
18 Nuts 1 6598343 1 660143 1 661143
19 Adjusting coupling 5 659836 6 66016 5 66116
20 O-ring 1 6598344 1 660144 1 661144
21 Lubricant nipple 1 659837 1 66017 1 65117
* Core Bit is not supplied with corebarrel and must be ordered separately.
Thread connection in corebarrel head 50 mm 50 mm NW
Reaming shell outside diameter (mm) 76.3 86.3 101.3
86 101
Bit inside diameter (mm) 57 67 79
T6 DOUBLE TUBE CORE BARRELS
T6-76 T6-86 T6-101
Bit outside diameter (mm) 76
Item Description Qty Part No. Qty Part No. Qty Part No.
Complete corebarrel 1.5m long 672 677 682
Complete corebarrel 3.0m long 671 676 681
1 Outer tube 1.5m long 1 6722 1 6772 1 6822
Outer tube 3.0m long 1 6712 1 6762 1 6812
2 Inner tube 1.5m long 1 6723 1 6773 1 6823
Inner tube 3.0m long 1 6713 1 6763 1 6813
3 Blank reaming shell 1 6728 1 6778 1 6828
4 Extension tube 1 6714 1 6764 1 6814
5 Lifter case 1 6715 1 6765 1 6815
6 Corelifter 1 6716 1 6766 1 6816
7* Core Bit
8-21 Head assembly complete 1 6711 1 6761 1 6811
8 Corebarrel coupling 1 67111 1 67611 1 68111
9 Inner head 1 67112 1 67612 1 68112
10 Lubricant nipple 1 67113 1 67613 1 68113
11 Lock-nut 1 67114 1 67614 1 68114
12 Washer 1 67115 1 67615 1 68115
13 Bearings 1 67116 1 67616 1 68116
14 Washers 1 67117 1 67617 1 68117
15 Thrust bearings 1 67118 1 67618 1 68118
16 Bearing housing 5 67119 6 67619 5 68119
17 Seal ring 1 67120 1 67620 1 68120
18 Bearing shaft 1 67121 1 67621 1 68121
19 Nuts 1 67122 1 67622 1 68122
20 Adjusting coupling 5 67123 6 67623 5 68123
21 O-ring 1 67124 1 67624 1 68124
* Core Bit is not supplied with corebarrel and should be ordered separately
T6 DOUBLE TUBE CORE BARRELS
T6-116 T6-131 T6-146
Bit outside diameter (mm) 116 131 146
Bit inside diameter (mm) 93 108 123
Reaming shell outside diameter (mm) 116.3 131.3 146.3
Thread connection in corebarrel head NW NW NW
Item Description Qty Part No. Qty Part No. Qty Part No.
TC Reaming Shell 65988 6608 6579
Diamond Reaming Shell 659881 66082 6580
TC Core Bit 65989 66090 6629
Impregnated Core Bit 659892 66091 66291
Surface Set Core Bit 659894 66092 66292
Cube Set Core Bit 659893 66093 66293
Full Circle Wrench - Inner Tube 65995 66095 66295
Full Circle Wrench - Outer Tube 65996 66096 66296
Item Description Qty Part No. Qty Part No. Qty Part No.
TC Reaming Shell 6729 6769 6829
Diamond Reaming Shell 6730 6770 6830
TC Core Bit 6741 6781 6831
Impregnated Core Bit 6746 6786 6836
Surface Set Core Bit 6745 6785 6835
Cube Set Core Bit 6748 6788 6838
Full Circle Wrench - Inner Tube 67495 67895 68395
Full Circle Wrench - Outer Tube 67496 67896 68396
ACCESSORIES FOR T6 DOUBLE TUBE CORE BARRELS
Accessories T6-76 T6-86 T6-101
Accessories T6-116 T6-131 T6-146
Item Description Qty Part No.
Complete corebarrel 1.5m long 667
Complete corebarrel 3.0m long 666
1 Outer tube 1.5m long 1 6672
Outer tube 3.0m long 1 6662
2 Inner tube 1.5m long 1 6623
Inner tube 3.0m long 1 6613
3 Blank reaming shell 1 6678
4 Lifter case 1 6615
5 Corelifter 1 6616
6* Core Bit
7-21 Head assembly complete 1 6661
7 Corebarrel coupling 1 66611
8 Inner head 1 66110
9 Bearing housing 1 66112
10 Lock-nut 1 66113
11 Washer 1 661141
12 Bearings 1 66115
13 Washers 1 661142
14 Thrust bearings 1 661143
15 Spacer 5 66116
16 Thrust bearings 1 661144
17 Bearing shaft 1 65117
18 Nuts 1 661143
19 Adjusting coupling 5 66116
20 O-ring 1 661144
21 Lubricant nipple 1 65117
* Core Bit is not supplied with corebarrel and must be ordered separately.
Item Description Qty Part No.
Diamond Reaming Shell 6680
Surface Set Core Bit 6685
Impregnated Core Bit 6686
Sawtooth Core Bit 6687
Accessories T6-H
98.9
Bit inside diameter (mm) 79
Bit outside diameter (mm)
Thread connection in corebarrel head NW
Reaming shell outside diameter (mm) 99.2
T6-H DOUBLE TUBE CORE BARREL
Core Barrel Type T6-H
Item Description Qty Part No.
Complete corebarrel 1.5m long 6501
Complete corebarrel 3.0m long 6500
1 Inner tube 1.5m long 1 65012
Inner tube 3.0m long 1 65002
2 Outer tube 1.5m long 1 65013
Outer tube 3.0m long 1 65003
3 Blank reaming shell 1 65007
4 Extension tube 1 65004
5 Lifter case 1 65005
6 Corelifter 1 65006
7* Core Bit
8-17 Head assembly complete 1 65001
8 Corebarrel coupling 1 650011
9 Bearing shaft 1 650012
10 Bearing housing 1 650013
11 Washer 1 6500141
12 Circlip 1 650015
13 Washers 1 6500142
14 Set of adjusting washers 1 6500143
15 Ball bearings 5 650016
16 Washer 1 6500144
17 Lock-nut 1 650017
* Core Bit is not supplied with corebarrel and must be ordered separately.
Item Description Qty Part No.
Diamond Reaming shell 650081
Surface Set Core Bit 650094
Impregnated Core Bit 650093
Sawtooth Core Bit 650095
TNW DOUBLE TUBE CORE BARREL
Core Barrel Type TNW
Bit outside diameter (mm) 75.3
Thread connection in corebarrel head NW ROD
Accessories TNW
Bit inside diameter (mm) 60.8
Reaming shell outside diameter (mm) 75.7
Item Description Qty Part No. Qty Part No. Qty Part No.
Complete corebarrel 5ft long 602 607 612
Complete corebarrel 10ft long 601 606 611
1* Core Bit
2 Lifter case 1 6014 1 6064 1 6114
3 Corelifter 1 6016 1 6066 1 6116
4 Ferrule (for inner tube) 1 60132 - -
5 Inner tube 5ft long 1 6023 1 6073 1 6123
Inner tube 10ft long 1 6013 1 6063 1 6113
6 Outer tube 5ft long 1 6022 1 6072 1 6122
Outer tube 10ft long 1 6012 1 6062 1 6112
7-16 Head assembly complete 6011 6061 6111
7 Spindle 1 60119 1 60619 1 60619
8 Spacer washer 1 601191 - -
9 Thrust washer 1 60118 1 60618 1 60618
10 Shim set 1 60117 1 60617 1 61117
11 Inner tube bung 1 60115 1 60615 1 60615
12 Oilite bush 2 60116 1 60616 1 60616
13 Thrust bearing 1 60113 1 60613 1 60613
14 Lock-nut 1 60114 1 60614 1 60614
15 Steel ball 1 60112 1 60112 1 60112
16 Corebarrel coupling 1 60111 6 60611 5 61111
* Core Bit is not supplied with corebarrel and should be ordered separately
Item Description Qty Part No. Qty Part No. Qty Part No.
TC Core Bit 6041 6081 6131
Sawtooth Core Bit 6043 6093 6133
Surface Set Core Bit 6045 6095 6135
Impregnated Core Bit 6046 6096 6132
Cube Set Core Bit 6048 6098 6139
The WF series corebarrels are ideal for coring soft as well as hard formations. For softformations use core bits with face discharge waterways to prevent erosion of the core.These corebarrels can also be used with plastic liners or mylar liners to form a triple tubecorebarrel.
Core Barrel Type HWF PWF SWF
119.9 145.3
Bit inside diameter (mm) 76.2 92.1
WF SERIES DOUBLE TUBE CORE BARRELS
Core Barrel Type HWF PWF SWF
Bit outside diameter (mm) 98.8
112.7
Reaming shell outside diameter (mm) 99.2 120.7 146
Thread connection in corebarrel head HW 2 7/8 API IF 2 7/8 API IF
Item Description Qty Part No.
Complete corebarrel 5ft long 622
Complete corebarrel 10ft long 621
1* Core Bit
2 Lifter case 1 6214
3 Corelifter 1 6216
4 Ferrule (for inner tube) 1 -
5 Inner tube 5ft long 1 6223
Inner tube 10ft long 1 6213
6 Outer tube 5ft long 1 6222
Outer tube 10ft long 1 6212
7-16 Head assembly complete 6211
7 Spindle 1 62119
8 Spacer washer 1 621191
9 Thrust washer 1 62118
10 Shim set 1 62117
11 Inner tube bung 1 62115
12 Oilite bush 2 62116
13 Thrust bearing 1 62113
14 Lock-nut 1 62114
15 Steel ball 1 62112
16 Corebarrel coupling 1 62111
* Core Bit is not supplied with corebarrel and should be ordered separately
Item Description Qty Part No.
TC Core Bit 6241
Sawtooth Core Bit 6243
PDC Core Bit 6244
Accessories 412
Reaming shell outside diameter (mm) -
Thread connection in corebarrel head HW
74.7
412 DOUBLE TUBE CORE BARREL
Core Barrel Type 412
The 412 core barrel is designed as an air flush core barrel, for coring softformations, such as limestones, sandstones and coal measures. The large annulusbetween the outer tube and inner tube allows a large volume of air to be pumpedthrough the core barrel for clearance of the rock cuttings. These corebarrels canalso be used with plastic liners or mylar liners to form a triple tube corebarrel.
Bit outside diameter (mm) 107.2
Bit inside diameter (mm)
Item Description Qty Part No. Qty Part No. Qty Part No.
Complete corebarrel 5ft long 6861 6911 6921
Complete corebarrel 10ft long 6860 6910 6920
1 Head Assembly 1 68611 1 69111 1 69211
2 Inner tube 5ft long 1 68643 1 69143 1 69243
Inner tube 10ft long 1 68642 1 69142 1 69242
3 Stop ring 1 686412 1 691412 1 692412
4 Corelifter 1 68641 1 69141 1 69241
5 Lifter case 1 68640 1 69140 1 69240
6 Locking coupling 1 68646 1 69146 1 69246
7 Adapter coupling 1 68647 1 69147 1 69247
8 Landing ring 1 68648 1 69148 1 69248
9 Outer tube 5ft 1 68645 1 69145 1 69245
9 Outer tube 10ft 1 68644 1 69144 1 69244
10 Inner tube stabilizer 1 68649 1 69149 1 69249
11 Thread protector 1 68658 1 69158 1 69258
* Core Bit and Reaming Shell are not supplied with corebarrel assembly and should be ordered separately
Overshot Assembly Complete
Compact Overshot NQ HQ PQ
6863 6913 6923
85
Q SERIES WIRELINE CORE BARRELS
Core Barrel Type NQ HQ PQ
Bit outside diameter (mm) 75.3
Reaming shell outside diameter (mm) 75.7 96.3 122.5
95.8 122
Bit inside diameter (mm) 47.6 63.5
Bit outside diameter (mm)
Bit inside diameter (mm)
Reaming shell outside diameter (mm)
Item Description Qty Part No.
Complete corebarrel 5ft long 69113
Complete corebarrel 10ft long 69103
1 Head Assembly 1 69111
2 Pump 0ut Adaptor, 3/4" NPT 1 6911311
3 Piston Plug 1 6911312
4 O Ring 1 6911313
5 Core Ejection Piston 1 6911314
6 Split Inner Tube 5ft long 1 6911315
Split Inner Tube 10ft long 1 6911316
7 Inner tube 5ft long 1 69143
Inner tube 10ft long 1 69142
8 Stop ring 1 691139
9 Corelifter 1 691134
10 Lifter case 1 691135
11 Locking coupling 1 69146
12 Adapter coupling 1 69147
13 Landing ring 1 69148
14 Outer tube 5ft 1 69145
Outer tube 10ft 1 69144
15 Inner tube stabilizer 1 69149
16 Thread protector 1 69158
* Core Bit and Reaming Shell are not supplied with corebarrel assembly and should be ordered separately
96.3
TRIPLE TUBE WIRELINE CORE BARRELS
95.8
61.1
HQ3
Item Description Qty Part No. Qty Part No. Qty Part No. Qty Part No.
TC Reaming Shell 68659 69159 69159 69259
Diamond Reaming shell 68660 69160 69160 69260
TC Core Bit Insert Type 68662 69162 69177 69262
TC Core Bit Carbotec Type 68663 69163 - 69263
Surface Set Core Bit 68664 69164 69179 69264
Impregnated Core Bit 68665 69165 69175 69265
Cube Set Core Bit 68666 69166 69176 69266
Full Grip Wrench - Outer tube 68650 69150 69150 69250
Full Grip Wrench - Inner tube 68651 69151 69151 69251
PQNQ HQ HQ3
ACCESSORIES FOR WIRELINE CORE BARRELS
WIRELINE DRILL RODS
Dimensions AQ BQ NQ HQ PQ
Rod O.D. (mm) 44.5 55.6 69.9 88.9 114.3
Rod I.D. (mm) 34.9 46.0 60.3 77.8 103.2
Approx weight (kg per m) 4.7 6.1 7.7 11.6 15.9
Description AQ BQ NQ HQ PQ
Rod L=10ft 7800 7810 7820 7830 7830
Rod L=5ft 7801 7811 7821 7831 7831
Rod L=2ft 7802 7812 7822 7832 7832
Drill Rod Wrench 7809 7819 7829 7839 7839
Rod Designation
Part Number
Wireline drill rods are manufactured by Boart Longyear using very high specification steeland heat-treated threads for very long service life.
Available in sizes AQ - PQ.
PARALLEL THREADED DRILL RODS
Dimensions AW BW NW HW 42mm 50mm
Rod O.D. (mm) 44.4 54.0 66.7 88.9 42.0 50.0
Rod I.D. (mm) 31.7 38.0 50.8 72.0 32.2 37.0
Coupler I.D. (mm) 15.9 17.5 35.0 60.3 22.0 22.0
Approx weight (kg per m) 6.2 8.6 12.3 16.9 4.2 6.7
Description AW BW NW HW 42mm 50mm
Rod c/w coupling L=3.0m 7500 7510 7520 7530 7600 7610
Rod c/w coupling L=1.5m 7502 7512 7522 7532 7602 7612
Rod c/w coupling L=0.75m 7504 7514 7524 7534 7604 7614
Coupling 7509 7519 7529 7539 7609 7619
Rod Spanner 7507 7517 7527 7537 7607 7617
Rod Hoisting Swivel 7506 7516 7526 7536 7606 7616
DCDMA SERIES METRIC SERIES
Part Number
Parallel threaded drill rods are available in two series, DCDMA sizes AW - HW, and Metricsizes 42 and 50mm. Both series consist of a hollow steel tube with a box thread at each end.The tubes are connected by means of a coupler manufactured from hardened alloy steel. Therods are mainly used for rotary coring applications, and may connect directly onto the corebarrel head, either with or without an adaptor. AW and BW rods are also sometimes used asSPT drive rods, although we would recommend using our specially designed SPT rods for thispurpose, as they can better withstand the percussive forces generated during driving with atrip hammer.
When choosing the diameter of the rod to be used for rotary applications consideration shouldbe made of the diameter of the core barrel, and the annulus in the borehole around the rodshould be minimized to generate sufficient uphole velocity of flush necessary to clear thecuttings. Rod spanner and hoisting swivels are available for each diameter of rod.
TAPER THREADED DRILL RODS
Dimensions AWY BWY NWY HWY
Rod O.D. (mm) 44.4 54.0 66.7 88.9
Rod I.D. (mm) 31.7 38.0 54.0 72.9
Coupler I.D. (mm) 15.9 19.0 31.7 44.4
Approx weight (kg per m) 6.2 9.5 10.6 17.0
Description AWY BWY NWY HWY
Rod complete L=3.0m 7560 7570 7580 7590
Rod complete L=1.5m 7561 7571 7581 7591
Rod complete L=0.75m 7562 7572 7582 7592
Box Tool Joint (Female end) 75651 75751 75851 75951
Pin Tool Joint (Male end) 75652 75752 75852 75952
Rod Spanner 7567 7577 7587 7597
Rod Hoisting Swivel 7566 7576 7586 7596
Part Number
Rod Designation
Taper threaded drill rods are available in DCDMA sizes AWY - HWY. The rodsconsist of a hollow steel tube with a box thread at each end. Male and female tooljoints manufactured from hardened alloy steel are threaded to the tube at eachend. This design gives longer life to the rods compared with parallel thraed rods,and facilitates rapid coupling and coupling using drill rigs with a break-out device.
When choosing the diameter of the rod to be used for rotary applicationsconsideration should be made of the diameter of the core barrel, and the annulus inthe borehole around the rod should be minimized to generate sufficient upholevelocity of flush necessary to clear the cuttings. Rod spanner and hoisting swivelsare available for each diameter of rod.
Dimensions FW 76 FW 89 FW 114 FW 140
Rod O.D. (mm) 76.0 89.0 114.3 139.7
Connection Type2 3/8" API
Reg2 3/8" API
Reg3 1/2" API
Reg4 1/2" API
Reg
Approx weight (kg per m) 12 15 20 28
Description FW 76 FW 89 FW 114 FW 140
Rod complete L=3.0m 7700 7710 7720 7730
Rod complete L=2.0m 7701 7711 7721 7731
Rod complete L=1.5m 7702 7712 7722 7732
Rod complete L=1.0m 7703 7713 7723 7733
Rod Hoisting Swivel 7706 7706 7726 7736
Part Number
FRICTION-WELDED DRILL RODS FORDTH HAMMER USE
Friction-welded drill rods are ideal for use with down the hole hammers. The rodsconsist of a high-qiuality steel tube with male and female tool joints friction weldedonto each end. The adavantage of friction-welding is that it forms a very strongbond between the tool joints and the rod tube, to easily withstand the stressesinvolved in percussive drilling. (Rods with threaded tool joints are not recommendedfor DTH drilling as they tend to "climb-over" the rod tube with continued use). Thetool joints are specially surface hardened for increased wear resistance. Each tooljoint has square spanner flats (see cross section).
The rods are available in 4 standard sizes with API type connections, and areprovided with thread protectors to prevent damage to the rod ends during transportand storage Hoisting swivels are available for each size.
Rod Designation
METRIC SERIES CASING
Dimensions 46 56 66 76 86 101 116 131 146
Outside Diameter "A" (mm) 44 54 64 74 84 98 113 128 143
Inside Diameter "B" (mm) 37 47 57 67 77 89 104 119 134
Approx weight (kg per m) 3.5 4.4 5.3 6.3 7.2 10.5 12.4 13.8 15.4
Description 46 56 66 76 86 101 116 131 146
Casing L=3.0m 7200 7210 7220 7230 7240 7250 7260 7270 7280
Casing L=1.5m 7202 7212 7222 7232 7242 7252 7262 7272 7282
Casing L=0.75m 7204 7214 7224 7234 7244 7254 7264 7274 7284
Casing Shoe TC 72070 72170 72270 72370 72470 72570 72670 72770 72870
Casing Shoe Diamond 72071 72171 72271 72371 72471 72571 72671 72771 72871
Casing Drive Head* 7206 7216 7226 7236 7246 7256 7266 7276 7286
* Specify drill rod connection required when ordering Casing Drive Head
Part Number
Metric casing is designed to be used in conjunction with metric series core barrels TT, T2 and T6Series, The casing has integral pin and box threads at each end, and is made from a thinner butstronger material than the imperial sizes (W and X series). The internal diameter provides sufficientclearance for the respective sized corebarrels to pass down. For example, a T6-116 core barrel will drilla 116mm diameter hole which can then be cased with 116 casing. The the next core barrel in theseries, T6-101 will then fit inside the 116 casing to continue coring to a greater depth.
Casing drive heads, and casing shoes in diamond and tungsten carbide are available for each size.When ordering casing drive heads, please specify drill rod connection required.
Casing Type
W SERIES CASING
Dimensions BW NW HW PW SW UW ZW
Outside Diameter "A" (mm) 73.0 88.9 114.3 139.7 168.3 193.7 219.1
Inside Diameter "B" (mm) 60.3 76.2 101.6 127 150.8 176.2 203.2
Approx weight (kg per m) 10.5 12.9 16.9 20.9 32.5 39.9 41.3
Description BW NW HW PW SW UW ZW
Casing L=3.0m 7000 7010 7020 7030 7040 7050 7060
Casing L=1.5m 7002 7012 7022 7032 7042 7052 7062
Casing L=0.75m 7004 7014 7024 7034 7044 7054 7064
Casing Shoe TC 70070 70170 70270 70370 70470 70570 70670
Casing Shoe Diamond 70071 70171 70271 70371 70471 70571 70671
Casing Drive Head* 7006 7016 7026 7036 7046 7056 7066
* Specify drill rod connection required when ordering Casing Drive Head
Casing Type
Part Number
Flush-jointed casing has integral pin and box threads at each end, and unlike the XSeries does not rely on separate couplings to connect each length together. Theheavier wall section provides internal and external mating shoulders for the threads tobutt-up againts, preventing the threads climbing up under heavy torque loads. This isthe most popular type of casing used in geotechnical applications. The internaldiameter provides sufficient clearance for the respective sized corebarrels to passdown, e.g. HWF corebarrel within HW casing, PWF corebarrel within PW casing etc.
The smaller diameters B-H are manufactured from cold drawn seamless tubes, and thelarger diameters P-Z from hot-finished seamless tubes, grade ST52 or higher. Casingdrive heads, and casing shoes in diamond and tungsten carbide are available for eachsize. When ordering casing drive heads, please specify drill rod connection required.
X SERIES CASING
Dimensions NX HX PX
Outside Diameter "A" (mm) 88.9 114.3 139.7
Inside Diameter "B" (mm) 76.2 100.0 123.6
Approx weight (kg per m) 12.9 16.9 20.9
Description NX HX PX
Casing L=3.0m 7110 7120 7130
Casing L=1.5m 7112 7122 7132
Casing L=0.75m 7114 7124 7134
Casing Shoe TC 71101 71201 71301
Casing Shoe Diamond 71171 71271 71371
Casing Drive Head* 7116 7126 7136
* Specify drill rod connection required when ordering Casing Drive Head
As an option this casing can be manufactured as a flush-jointed type, lacking thecoupling, but with X series pin and box threads at each end
Flush-coupled casing uses separate couplings to connect each length together. Thewall thickness of the coupling is slighthly thicker than the mid-body section of eachtube, giving a lighter weight casing string but still the advantage of strength in thethreaded section. The internal diameter provides sufficient clearance for the respectivesized corebarrels to pass down, e.g. HWF corebarrel within HW casing, PWF corebarrelwithin PW casing etc.
The smaller diameters N-H are manufactured from cold drawn seamless tubes, and thelarger diameters P-Z from hot-finished seamless tubes, grade ST52 or higher. Casingdrive heads, and casing shoes in diamond and tungsten carbide are available for eachsize. When ordering casing drive heads, please specify drill rod connection required.
Casing Type
Part Number
DRAG BITS TRICONE ROCK BITS
Milled Steel ToothTricone Bit
Tungsten CarbideInsert (TCI)Tricone Bit
Size Pin Connection Part No. Size Pin Connection Part No.
2 15/16" N ROD 9001-9003 2 15/16" N ROD 9005
3" N ROD 9011-9013 3" N ROD 9015
3 1/4" N ROD 9021-9023 3 1/4" N ROD n/a
3 7/8" 2 3/8" API REG 9031-9033 3 7/8" 2 3/8" API REG 9035
4" 2 3/8" API REG 9041-9043 4" 2 3/8" API REG 9045
4 1/8" 2 3/8" API REG 9051-9053 4 1/8" 2 3/8" API REG 9055
4 1/2" 2 3/8" API REG 9061-9063 4 1/2" 2 3/8" API REG 9065
4 3/4" 2 7/8" API REG 9071-9073 4 3/4" 2 7/8" API REG 9075
4 7/8" 2 3/8" API REG 9081-9083 4 7/8" 2 3/8" API REG 9085
5" 2 3/8" API REG 9091-9093 5" 2 3/8" API REG 9095
5 1/8" 2 7/8" API REG 9101-9103 5 1/8" 2 7/8" API REG 9105
5 1/4" 2 7/8" API REG 9111-9113 5 1/4" 2 7/8" API REG 9115
5 1/2" 3 1/2" API REG 9121-9123 5 1/2" 3 1/2" API REG n/a
5 5/8" 3 1/2" API REG 9131-9133 5 5/8" 3 1/2" API REG 9135
5 7/8" 3 1/2" API REG 9141-9143 5 7/8" 3 1/2" API REG 9145
6" 3 1/2" API REG 9151-9153 6" 3 1/2" API REG 9155
6 1/8" 3 1/2" API REG 9161-9163 6 1/8" 3 1/2" API REG 9165
6 1/4" 3 1/2" API REG 9171-9173 6 1/4" 3 1/2" API REG 9175
6 3/8" 3 1/2" API REG 9181-9183 6 3/8" 3 1/2" API REG 9185
6 1/2" 3 1/2" API REG 9191-9193 6 1/2" 3 1/2" API REG 9195
6 3/4" 3 1/2" API REG 9201-9203 6 3/4" 3 1/2" API REG 9205
Refurbished bits are sometimes available in the larger sizes, which give an economical performance for civil engineeringand water well drilling applications.
Sizes up to 12 1/4" available - ask for details
Milled Sttel Tooth Tricone Bits Tungsten Carbide Insert (TCI) Rock Bits
Tricone bits are available in with either Milled Steel Teeth or Tungsten Carbide Insert (TCI) Teeth. The last digit of thepart number indicates the rock hardness, in increasing hardness 1 - 3 (for Steel Tooth Bits) and 4 - 8 (TCI bits).
Sizes up to 12 1/4" available - ask for details
DRAG BITS DRAG BITS
Chevron type3-wing drag bit
Step type3-wing drag bit
Size Pin Connection Part No. Size Pin Connection Part No.
1 7/8" - 2 1/2" AW, A ROD 9670 - 9673 2 3/4" - 3 1/2" N ROD 965
2 3/4" AW, A ROD 9674 3 5/8" - 4 3/4" 2 3/8" API REG 9651 - 9655
2 7/8" AW, A ROD 9675 5" 2 3/8" API REG 9656
2 3/4" - 3 1/8" N ROD 9676 5 1/8" 2 3/8" API REG 9657
3 1/4" N ROD 9677 5 1/4" 2 3/8" API REG 9658
3 1/2" N ROD 9678 5 1/2" 2 3/8" API REG 9659
3 3/4" N ROD 9679 5 5/8" 2 3/8" API REG 9660
3 3/4" - 4 3/4" 2 3/8" API REG 968 - 972 6" 2 3/8" API REG 9661
5" 2 3/8" API REG 973 6 1/4" 2 3/8" API REG 9662
5 1/8" 2 3/8" API REG 974 6 1/2" 2 3/8" API REG 9663
5 1/4" - 5 1/2" 2 3/8" API REG 975 - 976 6 3/4" 2 3/8" API REG 9664
4 5/8" - 4 7/8" 2 7/8" API REG 977 - 978 5 1/2" - 6 3/4" 3 1/2" API REG 96651 - 96655
5" 2 7/8" API REG 9781 6 7/8" - 7 7/8" 3 1/2" API REG 96656- 96660
5 1/8" - 5 1/2" 2 7/8" API REG 9782 - 9783 8" - 9" 3 1/2" API REG 96661
5 1/2" 3 1/2" API REG 9784 9 1/8" - 10" 3 1/2" API REG 96662
5 5/8" 3 1/2" API REG 9785 10 1/8" - 10 7/8" 3 1/2" API REG 96663
6" 3 1/2" API REG 9786 7 7/8" - 8 7/8" 3 1/2" API REG 96664
6 1/8" 3 1/2" API REG 9787 9 - 9 7/8" 3 1/2" API REG 96665
6 1/4" 3 1/2" API REG 9788 10 - 10 7/8" 3 1/2" API REG 96666
6 1/2" 3 1/2" API REG 9789 11 - 12" 4 1/2" API REG 96667
6 3/4" 3 1/2" API REG 9790 12 1/4" 4 1/2" API REG 96668
7" 3 1/2" API REG 9791
7 1/4" 3 1/2" API REG 9792
7 1/2" 3 1/2" API REG 9793
7 3/4" 3 1/2" API REG 9794
7 7/8" 3 1/2" API REG 9795
8" 3 1/2" API REG 9796
Chevron type 3-wing drag bit Step type 3-wing drag bit
Sizes up to 22" available - please ask for details
All drag bits are manufactured as one piece, from forged steel, with sintered tungsten carbide inserts on the cuttingedges, available in two styles, chevron type or step type
Item Description Part No. Wt. (kg)
1-14 Water Swivel 5T, complete 9800 12.3
1 Hoisting Cap 98001 3.2
2 Capscrew (4 pcs) 98002 -
3 Spring Washer (8 pcs) 98003 -
4 O Ring 98004 -
5 Packing 98005 -
6 Bush (2 pcs) 98006 -
7 Thrust Bearing (2 pcs) 98007 -
8 Capscrew (4 pcs) 98008 -
9 Spindle 98009 1.6
10 Washer 98010 -
11 Bearing Cap 98011 0.7
12 Grease Nipple 98012 -
13 Housing 98013 4
14 Hose Adaptor 98014 0.1
15 Drill Rod Adaptor* 9805 0.1
WATER SWIVEL 5 TONNE
Water Swivel 5 Tonne
* The Drill Rod Adaptor (item 15) is purchased separately andcustomer is required to indicate drill rod connection required.
This lightweight and compact water swivel is perfect for geotechnicalworks and can be used with several different types of rods simply bychanging the adaptor attached to the lower end. It is designed to pullout by means of its hoisting cap weights up to 5 metric tonnes.
Its spare parts are ruggedly constructed to undertake the heaviestduties.
Item Description Part No. Wt. (kg)
1-10 Automatic trip hammer assembly 490 107
1 Outer tube assembly c/w pawls 4904 16
2 Inner guide shaft 4903 12
3 Safety retaining bolt 49044 -
4 Pair of pawls (pick up dogs) 49041 0.2
5 Pair of pawl pins 49042 -
6 Pair of pawl springs 49043 -
7 Pick-up collar 49021 1
8 Drop weight 63.5kg 4902 63.5
9 Anvil * 4901 15
10 Seloc pin for retaining anvil 4905 -
AUTOMATIC TRIP HAMMER FOR S.P.T.
Drop weight (kg) 63.5
Automatic trip hammer complying with B.S. 1377
* The anvil is provided with a 1 1/2" B.S. Whitworth box connection tofit our standard SPT rods. Adaptors to other types of drill rod can besupplied on request.
The Automatic Trip Hammer is designed for carrying out the StandardPenetration Test (SPT) to BS 1377: Part 9: 1990. SPT Drive Rods and aSplit Tube Sampler are connected to base of the anvil, and driven intothe ground by the falling weight.
The hammer comprises a drop weight of 63.5 kg and a pick-up and self-tripping mechanism that ensures the weight has a free fall of exactly760mm.
The inner shaft acts as a guide on which the weight drops with minimalresistance and strikes the anvil squarely.
The trip hammer is supplied with a Safety retaining bolt to prevent theweight from sliding when the hammer is not in use or during transport.
760Drop height (mm)
Item Description Part No. Weight (kg)
1-3 SPT Split Tube Sampler Assembly 404 7.3
1 Ball valve adaptor 1.1/2" BS Whit Pin* 418 2
Ball valve adaptor Quick Thread Pin 4181 2
2 Split tubes only (11 tpi V thread) 411 5
3 SPT Drive Shoe (11 tpi V thread) 422 0.3
4 SPT (C) Nose Cone (11 tpi V thread) 431 0.6
5 SPT (C) Solid Rod 1.1/2" BS Whit Pin* 435 9
5 SPT (C) Solid Rod Quick Thread Pin 436 9
* Standard connection is 1.1/2" BS Whitworth Pin (connects to Standard SPTDrive Rod). Adaptors to other drill rod types are available on request.
STANDARD SPLIT TUBE SAMPLER
For Standard Penetration Test. This split tube sampler is designed for takingsoil samples at the bottom of a cleared borehole using the Automatic TripHammer and SPT drive rods. The split tube is held together with a ball valveadaptor and a hardened steel drive shoe. The ball valve adaptor preventssamples from being washed out of the sampler when it is withdrawn from theborehole. A 60 degree nose cone or long solid rod with 60 degree point isavailable for carrying out SPT (c) tests in gravel and loose material.
The sampler is available in 2" diameter, according to the specification of BS1377 : Part 9: 1990.
For heavy driving conditions, the Heavy-duty "Tuflok" design is preferred.
Item Description Part No. Weight (kg)
1-3 2" Split Tube Sampler Assembly 400 7.3
1 2" Ball valve adaptor 1.1/2" BS Whit Pin 415 2
2" Ball valve adaptor Quick Thread Pin 417 2
2 2" Split tubes only 410 5
3 2" Drive Shoe BS 1377 420 0.3
2" Drive Shoe ASTM 424 0.3
4 2" Plastic liner c/w plastic end caps 429 0.15
5 2" Trap valve 428 0.04
6 2" Basket retainer - plastic 426 0.01
2" Basket retainer - steel 427 0.03
7 2" Drive Shoe BS - for basket retainer 421 0.3
8 2" SPT (C) Nose Cone (Tuflok type) 430 2
Item Description Part No. Weight (kg)
1-3 3" Split Tube Sampler Assembly 4400 12
1 3" Ball valve adaptor NW rod box 4401 4.3
2 3" Split tubes only 4402 7
3 3" SPT Drive Shoe 4403 0.7
4 3" Plastic liner c/w plastic end caps 4406 0.2
5 3" Trap valve 4408 0.1
2" Split Tube Sampler (BS or ASTM Standard)
3" Split Tube Sampler
HEAVY-DUTY "TUFLOK" SPLIT TUBE SAMPLER
For Standard Penetration Test. This is a heavy duty version of the standardsplit tube sampler and is designed for taking soil samples at the bottom of acleared borehole using the Automatic Trip Hammer and SPT drive rods. The splittube is held together with a ball valve adaptor and a hardened steel drive shoe.The ball valve adaptor prevents samples from being washed out of the samplerwhen it is withdrawn from the borehole. Basket retainers, trap valves and plasticliners are available as an option with this type of sampler.
The sampler is available in two diameters: 2" (to BS 1377 : Part 9: 1990 orU.S. ASTM Standards) and 3".
The split tube is forged and heat-treated and has a large driving shoulder at thetop end to prevent premature breakage under heavy driving conditions. The twohalves of the split tube lock together by means of a step in the profile of thetube, thus preventing bowing of the tube. The threads are coarse, square typefor quick and easy release of the drive shoe when necessary.
6 3" Basket retainer - plastic 4404 0.02
3" Basket retainer - steel 4405 0.08
Item Description Part No. Wt. (kg)
1 SPT Drive Rod 3.0m long 450 26
SPT Drive Rod 1.5m long 451 14
SPT Drive Rod 1.0m long 452 10
SPT Drive Rod 0.75m long 453 8
2 SPT Rod Swivel Hoist 455 7
3 SPT Rod Spanner 456 5
SPT DRIVE ROD, HOIST PLUG, ROD BITCH
SPT Drive Rod, Swivel Hoist & Rod Spanner
SPT Drive Rods complying with BS 1377: Part 9: 1990 aremanufactured from 54mm diameter tube with welded male and femalesolid ends, each with a 1.1/2" BS Whitworth thread. Each rod end hasa pair of spanner flats, to enable the rod to be gripped with stillsons orspecial rod spanner.
The rod spanner can also be used to suspend the drive rods at the topof the casing, during sampling operations.
A rod swivel hoist is also available for lowering and rtraising the rods inthe bore hole.
Item Description Part No. Wt. (kg)
1 3" Shelby Tube Head 355 6
2 3" Stainless Steel Shelby Tube 600mm 358 2
3" Stainless Steel Shelby Tube 1000mm 356 3.3
3 Spare set of screws for 3" Shelby Tube 3551 -
Plastic cap for 3" Shelby Tube 359 -
Item Description Part No. Wt. (kg)
1 4" Shelby Tube Head 350 9
2 4" Stainless Steel Shelby Tube 600mm 353 2.5
4" Stainless Steel Shelby Tube 1000mm 351 4
3 Spare set of screws for 4" Shelby Tube 3501 -
Plastic cap for 4" Shelby Tube 354 -
76.2
Inside diameter of tube (mm) 72.9
Area Ratio % 9.3%
SHELBY TUBE SAMPLERS
Thin-walled "Shelby" tube samplers are used for soils that are particularlysensitive to sampling disturbance, and consist of a thin-walled stainless steeltube whose lower edge is chamfered to form a cutting edge. The area ratio isless than 10%.
These samplers are suitable only for fine soils up to a firm consistency, andfree from large particles. They generally give Class 1 undisturbed samples inall fine cohesive soils, including sensitive clays, provided that the soil has notbeen disturbed by sinking the borehole.
Shelby tube samplers are available in two standard diameters, 3" and 4", butother diameters can be manufactured by special request.
The drive head contains a non-return valve to allow free exit of water and/orair above the sample. The sample tube is attached to the head by means offour screws
3" Shelby Tube Sampler
Outside diameter of tube (mm)
Area Ratio % 6.8%
4" Shelby Tube Sampler
Outside diameter of tube (mm) 101.6
Inside diameter of tube (mm) 98.3
118.6
104.4
29%
Item Description Part No.
1 Sample tube - aluminium 306
1 Sample tube - steel 305
2 Corecatcher 309
3 Cutting Shoe 310
Plastic End Caps for Sample Tube 308
Aluminium End Caps 307
123.8
101.6
48%
Item Description Part No.
4 Steel Liner Retainer 315
5 Plastic Liner 18" Long c/w end caps 325
6 Corecatcher 316
7 Spacer Ring (used with corecatcher) 319
8 Cutting Shoe 317
Minimum I.D. (mm)
Plastic Liner U100 System
Maximum O.D. (mm)
Minimum I.D. (mm)
U100 SAMPLING SYSTEMS
Standard U100 System
Area Ratio
These systems are designed for taking 100mm diameterundisturbed samples in clay and other soft formations. Thesample tubes are each 18" long and are driven into theground with a sliding hammer or other arrangement, via abell housing incorporating an air release valve.
Area Ratio
Maximum O.D. (mm)
Two systems are currently available. The Standard Systemutilises steel or aluminium sample tubes, with a cuttingshoe and optional corecatcher.
The Plastic Liner System utilises plastic liners to retain thesample. The plastic liner is retained within a steel tube.Although this system reduces the overall cost of takingsamples, the samples produces suffer greater disturbancedue to the higher area ratio compared with the standardsystem.
GUS PISTON SAMPLER
This unique, air or water-operated piston sampler has been designed andextensively test proven in the field, yielding truly undisturbed Class 1samples and high-production sampling.
How it works:
The GUS Sampler is assembled on a drill rod and lowered to the bottom of aclean, cased or self-supporting, borehole. A water or air swivel is attachedwith a hose line coupled to the swivel and the pressure pump. As the water orair pressure is applied at approximately 100 –600 P.S.I, the piston in thehead of the assembly (16) forces the thin wall sample tube (1) into the softunderlying soil or clay materials to take the sample.
Once the sampler reaches the end of its maximum travel, the water or airused for pressing exhausts through a relief hole, and returns immediately tothe surface. This is a signal to the operator that the sample has been taken toits maximum depth.
Depending on the materials being sampled, the sampling may take only afew seconds or as much as one minute to reach its maximum travel of 24”.
After the sample has been taken, the rods and sampler are pulled to thesurface and laid out on trestles for removal of the sample tube. The sampletube is rotated in 3 turns is an anti-clockwise direction which releases the“vacuum lock”created over the sample in the sample tube and allows foreasy removal of the sample tube containing the sample. A new sample tubeis then installed on the sample head and the procedure repeated.
Advantages of the GUS Sampler:
•Borehole diameter need not be larger than the sampler size in use.
•Simple to operate –there is no need for actuating rods or complicatedprocedures.
•Piston closes of sampler until sample is taken.
•No need for hoses in the borehole. Water or air is delivered directly throughthe drillrods.
•Drill rig is not necessary for sampling, however, hoist is required to lift toolsand sampler from the borehole.
•Inexpensive when compared to other types of piston samplers.
6" 8"
168.3 219.1
149.2 200.0
Item Description
1 Casing L=3.0m 501 531
2 Casing L=1.5m 500 530
3 Casing L=0.75m 502 532
4 Clevis & Pin 507 537
5 Casing Drive Head (Male) 505 535
6 Casing Drive Head (Female) 506 536
7 Casing Shoe (Female) 510 540
8 Casing Shoe (Male) 511 541
9 Casing Shoe T.C. 514 544
10 Casing Clamps 508 538
6" 8"
139.7 193.7
Item Description
11 Shell / Bailer Assembly 516 546
12 Steel Clack 5162 5462
13 Claycutter Assembly 515 545
14 Claycutter Ring 5152 5452
15 Tool Shoe (for Shell/Claycutter) 517 547
16 3-bladed Stubber 519 549
17 Cross Chisel 520 550
SHELL & AUGER CASING AND TOOLS
Shell & Auger Casing
Tool O.D. - Standard type (mm)
Part No.
Strong steel flush jointed casing ideal for use in general siteinvestigation works with cable percussion rigs. Heavy-duty drive headsand casing shoes with hardened bevel edge can be supplied with eithermale or female threads, depending on whether the casing is used in"pin-up" or "pin-down" position.
A complete suite of tools is also supplied including bailers, claycutters,cross cutters (stubbers) and chisels for clearing out the borehole.These tools are ruggedly constructed for maximum service life.
Nominal Diameter
Casing I.D. (mm)
Casing O.D. (mm)
Part No.
Tools for Shell & Auger Casing
Nominal Diameter
“GEOPRO”Inflatable Packers
Global Geotech supplies a complete range of inflatable packers innine different diameters from 28 –170mm. The inflatable sleeves arereinforced with two layers of steel cables embedded in naturalrubber.
The deflated packer is lowered into the drilled borehole and is theninflated with neutral gas or water injected through an inflation line. Aborehole is thus isolated and hydrological tests or cement groutingworks can be conducted in this area.
Thanks to their modular design, all Geopro packers offer reliable andeasy operation. Inflatable sleeves can be replaced in the field andsingle packers are easily adapted into double packers.
To convert a single packer to a double packer just unscrew thesliding end SE from the single packer and replace it with the CEelement. Complete the installation by screwing a standard sleeve Sand a plug PL on the lower part of the packer.
On all packer sizes of 56mm and greater, the CE element has adiameter identical to the whole packer assembly. This design makesthe double packer ZI extremely robust and the external flush,particularly well adapted to micropile grouting and water pressuretests.
In addition to standard packers, Global Geotech can supply specialpackers for different applications:-
Packers for testing water wells Packers for wire line core barrels Large diameter packer for boreholes 275 –450 mm Impression or “Print”Packers Pump packers for water sampling High pressure Hydrofracturing packers Plug packers for abandonment or recovery
Spare parts for packers and accessories such as inflation hoses,pumps and couplings are readily available