Global Leader HYUNDAMThe company cares for the environment first,is a human oriented company,and pursues the highest quality with consistent R&D.

HYUNDAM Ind Co.,Ltd5, Tojeong-ro 191beon-gil, Yeongin-myeon, Asan-si, Chungcheongnam-do, KoreaTel. 82-41-539-7288 Fax. 82-41-539-7360/380www.hyundam.com

www.hyundam.com

HYUNDAMHarmony Innovation Creation

Hyundam Ind. Co., Ltd. was established in 1992 to develop, manufactures and sells fuel pumps for automobiles in the Korean domestic market as well as the global automobile market.Hyundam Ind. Co., Ltd. will consistently make the best efforts to meet international quality standards and its customers' needs, and it will always be ahead of its competitors by focusing on customer satisfaction, quality, and technology innovation.

Best Partner

HYUNDAM

CONTENTSINTRODUCTION 4-5

MODULE 6-7

PUMP 8-9

SENDER 10-11

PR 12-13

FILTER 14-15

R&D 16-17

LOCATIONS 18-19

Harmony Innovation Creation

Global No.1Fuel pump Business

21st centuryGrowth Engine

SustainableManagement

system

GOAL

HYUNDAMHarmony Innovation Creation

Global Company with Continous Growth and high competitiveness.

Introduction

■ Establish August, 1992

■ Employee (HQ) 620 (R&D 70)

■ Turnover (2013) Sales (336 Mil. USD), Module (600 Mil. pcs), Pump (650 Mil. pcs)

■ Business· Fuel Pump Module ( incl. Motor cycle)· Components - Fuel Pump, Sender, P/Regulator, F/Filter, OPV/Controller

■ Site· HQ : Asan city, Chungnam· Plant : 3 domestic plants, 4 overseas plants (USA/China/India/Slovakia)· R&D : Cheonan city, Chungnam

■ Customer Hyundai/Kia, Ssangyong, Renault SamsungMercedes-Benz, Chrysler, Toyota, Ford, Mazda, Yamaha, Suzuki, Daihatsu

■ Result

·1st Diesel fuel pump application in Korea·1st BLDC fuel pump application in Korea·1st FFV fuel pump application in Korea·1st Canister integrated module application in Korea

STRATEGY THEME 7

Strengthen market share

ContinuousOperationalExcellence

Core CompetencySupport System

Core technology

High Performance Leader

Optimized Business Portfolio

Personal motivation system

06 / 07

CANISTER + PUMP MODULE

>> Function· Gasoline vapor collecting from Fuel tank

- Combustion the gasoline vapor by engine purge

- To supply the fuel to the engine

- To control the fuel system pressure

- To filter the fuel and supply to Injector

- To indicate the fuel gauge

>> Composition· Canister, Fuel Pump, Fuel Sender, Regulator, Jet Pump, Fuel filter, Reservoir cup

>> Distinction· To design the canister capacity according to the tank capacity (Satisfied with Euro 6)

MODULE

CONTROLLER + PUMP MODULE

Fuel Pump Module(Saddle type)

MOTOR CYCLE

>> Function· To supply the fuel to the engine according to changeable control of fuel pump

· To filter the fuel and supply to Injector

· To indicate the fuel gauge

>> Function· To supply the fuel to the engine

· To filter the fuel and supply to Injector

· To indicate the fuel gauge

· To apply the suction point for saddle fuel tank

>> Function· To supply the fuel to the engine

· To control the fuel system pressure

· To filter the fuel and supply to Injector

· To indicate the fuel gauge

Motor cycle has scheduled same emission control with 4 wheel vehicle and it needs the fuel pump module which is suitable for FI system.

>> Composition· Fuel Pump, Fuel Sender, OPV Jet pump, Fuel Filter, Reservoir Cup Controller, Pressure sensor

>> Distinction· Integrated Controller type

· NVH decreased structure

>> Composition· Fuel Pump, Fuel Sender, Regulator, Jet pump, Fuel Filter, Reservoir Cup

>> Distinction· Low current type

· NVH decreased structure

MODULE

<Normal type> <Saddle type>

<Bottom Mounted type> <Upper Mounted type>

>> Distinction· Variable mounting type for customer's requirements

· Low noise, low current turbine type fuel pump application

· Compact size suitable for motor cycle fuel tank

· Applicable for unleaded gasoline and ethanol gasoline

08 / 09

PUMP

BLDC (Brushless Direct Current)

GASOLINE

Function Fuel supply to engine by BLDC controller

Distinction · Performance increase : BLDC motor application / high efficiency impeller : V-Paddle· Durability increase : BLDC motor (No wear on commutator and brush) · Corrosion resistence design : over-molding, zinc coating, carbon bearing

Composition · STATOR, ROTOR, IMPELLER, BEARING, HOUSING, UPPER-BODY, CASE, LOWER-BODY, CHECK-VALVE

Specification · Fuel : GASOLINE, E20

DIESEL

Function Fuel supply to engine by BLDC controller

Distinction · Performance increase : BLDC motor application / Better performance and NVH by high efficiency GE-Rotor· Durability increase : BLDC motor (No wear on commutator and brush) · Corrosion resistence design : over-molding, Sn coating, carbon bearing, SUS

Composition · STATOR, ROTOR, GE-ROTOR, BEARING, HOUSING, UPPER-BODY, CASE, LOWER-BODY, CHECK-VALVE

Specification · Fuel : DIESEL, BD30

PUMP

DC (Direct Current)

LPG

Function Fuel supply to engine by BLDC controller

Distinction

· Durability increase : BLDC motor (No wear on commutator and brush) · Low noise impeller type· 2 impeller application : better performance at low voltage and high pressure· Corrosion resistence design : over-molding, zinc coating, carbon bearing

Composition · STATOR, ROTOR, IMPELLER, BEARING, HOUSING, UPPER-BODY, CASE, LOWER-BODY, CHECK-VALVE

Specification · Fuel : LPG

FFV(FLEXIBLE FUEL PUMP)

Function Fuel supply to engine by BLDC controller

Distinction · Performance increase : BLDC motor application / high efficiency impeller : V-Paddle· Durability increase : BLDC motor (No wear on commutator and brush) · Corrosion resistence design : over-molding, zinc coating, carbon bearing

Composition · STATOR, ROTOR, IMPELLER, BEARING, HOUSING, UPPER-BODY, CASE, LOWER-BODY, CHECK-VALVE

Specification · Fuel : E0 ~ E100

DC GSL/FFV

Fuel : E0~E100

Pressure : 350~570KPA

Flow rate : 50~200LPH

DC DSL

Fuel : BD0~BD20

Pressure : 400~600KPA

Flow rate : 125~200LPH

DC GSL Motor cycle

Fuel : E0~E100

Pressure : 200~350KPA

Flow rate : 10~40LPH

10 / 11

SENDER

SENDER

SENDER

Function · To indicate fuel level by sensing the fuel height in tank

Distinction · Better performance by using brush type multi contact

Composition · HOLDER, COVER, GRIPPER, ARM, CERAMIC, CONTACT, FLOAT

Specification · Normal fuel and tempareture

NON-CONTACT SENDER

Function · To indicate fuel level by sensing the fuel height in tank

Distinction · Durability increase by non-contact type (Hall IC : over-molding, Ferrite Magnet)

· Precise leveling by HALL IC

Composition · HALL IC, HOLDER, ARM, BODY, COVER, MAGNET, FLOAT

Specification · All fuel and region and variable temperature

NOBLE SENDER

Function · To indicate fuel level by sensing the fuel height in tank

Distinction · Durability increase by noble metal and 2 pin contact application

Composition · HOLDER, CERAMIC(Pd Paste), CONTACT(Pd Point), FLOAT, ARM, GRIPPER

Specification · E0~E85 Fuel· Dirty fuel and variable temperature

SEALING SENDER

Function · To indicate fuel level by sensing the fuel height in tank

Distinction · Durability increase by sealing contact structure· Operating by Magnetic field

Composition · HOLDER, COVER, GRIPPER, ARM, CERAMIC, CONTACT, MAGNET, FLOAT

Specification · All fuel and region and variable temperature

12 / 13

PR & FILTER

PRESSURE REGULATOR

TYPE

TYPE

OUT

IN

OUT

IN

IN

>> FunctionTo control the fuel pressure at the feed line (To supply the fuel without pressure change and to prevent the hesitation at the vehicle condition)

>> ApplicationGasoline MPI / GDI Engine / Diesel Engine type

Pressure Regulator & Filter

PRESSUREREGULATOR

PR & FILTER

FUEL FILTER(LONG LIFE FILTER)

>> FunctionTo filter out the particles from the fuel and supply the clean fuel to the engine (To prevent the contaminants at the fuel line)

>> ApplicationGasoline MPI / GDI Engine type

FUELFILTER

Research and Development of HYUNDAM

R & DResearch and Development

14 / 15

R & D

MAIN FACILITY

TechnicalCooperation

Status

■Fuel pump Module Assy

■Company : Aisan, Japan

HYUNDAM

LOCATIONS

16 / 17

CHINA

INDIA

SLOVAKIA

HYUNDAM LOCATIONS

SHENYANG XUANTAN AUTOMOBILE PARTS CO.,LTDADD: 2, 1A. NO4 STREET, SHENYANG DEVELOPMENT ZONE LIAO NING, CHINA TEL: 86-024-2537-7151

HYUNDAM AMERICA INC.ADD: 195-A Commerce Center, Greenville, South Carolina 29615, USA TEL: 1-864-288-3008

IHD INDUSTRIES PVT.LTD.ADD: Plot B-25 26, Sipcot Industrial Park, Irrungattukottai Sriperumbudur Kancheepuram 602105 Tamilnadu, INDIA TEL: 91-44-2715-6863

HYUNDAM SLOVAKIA S.R.OADD: IP-PCHZ, M.R Stefanika 71 010 01 Zilina, Slovakia Republic TEL: 070-7897-0195

Asan Plant (HQ)

ADD: 5, Tojeong-ro 191, Yeongin-myeon, Asan city, ChungnamT E L: +82-41-539-7200

Kyungju Plant

ADD: 11-8, Naengcheonjenaegongdangil, eodong-eup, Kyungju city, Kyungbuk TEL:+82-54-778-7300

R&DADD: 61, 1ro, Baeksukkongdan. Seobukgu, Cheonan city, Chungnam TEL:+82-54-778-7300

S. Korea

USA

Glob

al L

eade

r HY

UN

DA

MWe will open a new era with the spirit of endless challenge.

CERTIFICATES