goodway machine corp. - omnitechnique · goodway swiss type machine ... all spindle and servo...

SD/SW

GOODWAY MACHINE CORP.

Maximum Performance SWISS Turning Centers

SERIES

With leading technology and high quality components. Goodway Swiss Type machine

provides the best solution for those work pieces smaller than 32mm. Additional, SD & SW

series are not only with super rigid body, faster moving, and variety tooling selection but

also available with sub-spindle, l ive tooling and bar-feeder to accomplish today and

tomorrow’s most demand.

Fully enclosed splashguards keep chips and coolant contained for a safe clean working environment.

All spindle and servo motors, are Fanuc alpha i series components to ensure peak machining performance

and accuracy.

C3 class hardened and precision ground ball screws ensure the highest accuracy and durability possible.

Plus, pretension on all axes minimizes thermal distortion.

The auto lubrication system delivers metered amounts of lubrication to the slide ways, ball screws, and vital

components. Distribution is automatically shut off during idling to prevent waste.

Optional A/C to control the electrical cabinet’s temperature and humility which can extend the life of electrical

components inside e�cient.

MAXIMUM PERFORMANCE SWISS TURNING CENTERS

Advantage SD Series SW Series

( SD-16 series model shown. )

Drawings Dimensions Features Specifications

S: Standard O: Option –: Not Available

Sub-spindleMain & Sub-spindle simultaneous machiningSide live tool attachmentRear-end tool attachmentSpindle C-axis controlModule spindle designU-drill device

O

O

S

O

S

–

–

O

O

S

O

S

–

–

O

O

S

O

S

O

S

SD-16 SW-20 SW-32

MACHINING VARIATIONS

Side milling & tapping

Z-axis

SW-20

SD-161

2

Main & Sub-spindle simultaneous drilling and tapping

Y-axis

Z-axis

Y-axis

Z-axis

XB-axis

ZB-axis

Main & Sub-spindle simultaneous drilling and tapping

Main & Sub-spindle simultaneous milling

Z-axis

Y-axis

Z-axis

X-axis

Side milling &tapping

X-axis

Front offset drilling andtapping

Rear offset drillingand tapping

Z-axis

Y-axis

Z-axisXB-axis

ZB-axis

XB-axis

ZB-axisY-axis

O.D. Tool

I.D. Tool

Side Live Tool

SD SERIES TOOL SYSTEM

S D - 1 6 To o l S y s t e m

TOOL POSTStandard Tooling System

6

4

4 ( Max. )

2

5

4

4 ( Max. )

3

Option Tooling System

SD series is designed with maximum performance, minimum floor space and easy to operation. Also available with

live tooling, sub-spindle and C-axis to provide the mostly friendly working condition.

O.D. Tool

Front-end working tool

Rear-end working tool

Radial live tool

O.D. Tool



Radial live tool


3

4

Contact surfaces of all slides,

headstock, turret, tailstock, and ball

screw bearing housings with the

machine bed are hand scraped to

provide maximum assembly precision,

structural rigidity, and load distribution.

Z-axis is using Japan made high precision linear guide way. It provides

high accuracy positioning no matter it is in high or low speed.

Except Z-axis, all the guide ways are dovetail box way that made under

heat treatment and super high precision grinding. All the slide ways are

bonded with Turcite B to eliminate stick-slip, minimize wear and

maintain long term accuracy.

1500

24

14

2500 5000 7500 10000

1

2

3

4

5

0

10

15

20

25

Torque( N-m ) ( kW )

Output Torque( N-m ) ( kW )

Output

rpm

SD-16 Spindle Output SD-16 Sub-spindle Output

SD series is design with pneumatic system instead of hydraulic

system to achieve our goal that with environment friendly, safety

and easy to maintenance.

3.7 kW ( 15 min. )

Torque (15 min. )

2.2 kW ( con. )

Torque ( con. )

For top component precision,

Goodway utilizes top-end

measuring and balancing

equipment such as; ZEISS 3D

measuring system, Taylor

Hobson roundness measuring

system, BL high precision

dynamic balancer and many

more.


2000 4000 6000 80000

4

3

3.5

21.75

1

1.6

1.2

0.8

0.4

rpm

1.1 kW

Torque (15 min. )

0.55 kW

Torque ( con. )

SW SERIES TOOL SYSTEM

TOOL POSTFront-end Tooling System

O.D. Tool

I.D. Tool

Side Live Tool

Rear Live Tool

O.D. Tool



Radial live tool

Axial live tool

6

4

4

5 ( Max. )*¹

5 ( Max. )*²

Rear-end working tool 4 ( Max. )*³

S W - 2 0 To o l S y s t e m

*1 The uppper 3 positions are a fixed unit for milling and drilling and the buttom 2 positions allow variations to be fitted.

*2 The buttom 2 positions can be increased up to 5 front-end and 2 rear-end live tools.

*3 Live tools are available.

SW series offers more flexabile operations such as turning, milling and cross drilling. From a different

combination of power systems, main-spindle, sub-spindle, front-end tool, rear-end tool, C-axis and live

tools which means the workpiece can be finished at one time and also allows two operatons to be

machined simultaneously.

Rear-end Tooling System


MODULE SPINDLE CONSTRUCTION

Remaining bar length185 mm

( SW-32 only )

Bush type spindle configuration Bushless type spindle configuration

5

6Spindle can be exchange to be bush type or bushless type which is depend on di�erent work requirements.

The bushless design which is suitable for machining cold forge bar and the remain bar can be less than 50mm to

save material cost.

The bush type is with guide bush which is direct drive by servo motor and this kind direct drive system can be rotate

with high speed which can less surface damage and e�cient increase working performance.

1500 8000

24

14

2500 5000 7500 10000

1

2

3

4

5

0

10

15

20

25

Torque( N-m ) ( kW )

Output Torque Output Torque Output Torque Output

rpm

SW-20 Spindle Output SW-20 Sub-Spindle Output SW-32 Sub-Spindle Output

1500

48

35

1750 3500 5250 7000

2

4

6

8

0

15

30

45

60( N-m ) ( kW )

rpm6000

SW-32 Spindle Output

All axes are using Japan made high accuracy linear guide way to ensure the most stabilize and provide

ultra high performance in moving and positioning. Beside, guide way are pre-load to eliminate any

backlash occurs during high speed moving.

Based on di�erent application, the side rotary toolholder

can select di�erent live tool attachment, such as for OD

grooving, polygon machining or standard rotary toolholder.

SW series machine is standard with Fanuc built-in spindle and

C-axis control, which can increase machine stability and increase

machining accuracy.

The Sub-spindle is also with Fanuc built-in motor and C-axis

control, which can be simultaneous with main spindle perfectly

to maximum machining accuracy. ( SW-32 only )

Sub-spindle applied 2 U-Drill devices which can increase

tool number and make tool selection more �exible

(SW-32 only)

U-Drill Device

Spindle Output

Remaining bar length50 mm

3000

7

4

2000 4000 6000 8000

1

1.5

0.5

2

2.5

2

0

5

6

8( N-m ) ( kW )

rpm1500

24

14

1750 3500 5250 7000

1

2

3

4

5

0

10

15

20

25( N-m ) ( kW )

rpm

2.2 kW ( 15 min.)

Torque ( 15 min. )

1.5 kW ( con. )

Torque ( con. )

3.7 kW ( 30 min. )

Torque ( 30 min. )

2.2 kW ( con. )

Torque ( con. )

7.5 kW ( 30 min. )

Torque ( 30 min. )

5.5 kW ( con. )

Torque ( con. )

3.7 kW ( 30 min. )

Torque ( 30 min. )

2.2 kW ( con. )

Torque ( con. )


DRAWINGS

SD-16

SW-20

SW-32

26.5 26.5 26.5 26.5 26.5 28

50.5261

1 2525

25

Max

: 22

228.

5

50

Sub-spindle

25 25 25183149

32 32 32 26.5 26.5

286

T3100

T3100

T3200

T3300

T3400

T3100

T3200

T3300

T3400

T3500

31

32

33

34

3541

.534

3438

38

202

201

15.5

1

T1100 T1300

T1200 T1400

1 2 3 4 5 6

T100 T200 T300 T400 T500 T600

T100 T200 T300 T400 T500 T600

-X

+X

+Y-Y

-X

+X

+Y-Y

2 14

180

(18) 56.5

11

131.

533

3333

230.

526

5St.

(3) 37

+XB

-XB

-ZB+ZB

+XB

-XB

-ZB+ZB

139+Z-Z 207

Rear-end working tool holder

T2100T2200T2300T2400

T2100T2200

T4200

T2300T2400

T2000

Spindle

35 35 35 35 35

220 38

2

38 38

5246

4646

4624

Y-axis : 375

X-ax

is :

260

+X

-X

-Y +Y

Z-axis : 315 135

216

18-Z +Z

20

3491

ZB-axis : 280

ZB-axis : 260

2

217

4242

42

7522

65

ZB-a

xis

: 385

42

41T4100

T1100 T1300

T1200 T1400

1 2 3 4 5 6

31

32

33

34

35

Sub-spindle

Sub-spindle


Rear-end working tool holder

1.5

9

T2200

T2300

T2400

T1100

T1200

T1300

T1400

Side live tool

Side live tool

Side live tool

ID tool holder

Guide Bush

Guide bush

Guide bush

175

T2100

-Z +Z

+ZB -ZB

8760

Max:30

22275

T100 T200 T300 T400 T500 T600

T3100 T3200

1 2 3 4 5 6

31 32

Unit : mm

Spindle

Spindle

7

8

MACHINE LAYOUT

OPTIONAL FEATURES

2,385

1,73

0

1,250

SW-20

SW-32

SD-16

1,355 2,065

1,83

0

1,645

1,79

5

2,915

Oil Skimmer Oil mist collectorBar Feeder

Unit：mm


STANDARD & OPTIONAL FEATURES

1 set

1 set

1 set

S

S

S

S

S

O

S

O

O

O

S

O

S

S

O

S

O

S

S

O

O

O

−

−

−

−

−

−

O

S

S

S

O

S

S

S

−

S

O

S

S

S

S

S

S

O

S

O

O

S

O

S

O

S

S

O

S

O

S

S

O

O

O

O

O

O

O

O

O

O

S

S

S

O

S

S

S

S

S

O

S

S

S

S

S

S

O

S

O

O

O

S

O

S

S

O

S

O

S

S

O

O

O

O

O

O

O

O

O

O

S

S

S

O

S

S

S

S

S

O

S

FANUC CONTROL FUNCTIONS

OTHERS

25n sec/step

8.4" color LCD

10.4" color LCD

Large - 56 keys

320 K

512 K

1,024 K

2 M

4 M

8 M

400

1,000

64

99

200

400

HRV2 (3)

Fully enclosed guarding

Door interlock ( incl. Mechanical lock )

Impact resistant viewing window

Low hydraulic pressure detection switch

Over travel ( soft limit )

Load monitoring function

Cut off detector

PMC

Display

Graphic function

Full keypad

Part program storage lengthOi - TD : each path31i - : total

Registerable programsOi - TD : each path31i - : total

Tool offset pairsOi - TD : each path31i - : total

Servo control

Run hour & parts counter

Auto power o� function

Custom macro B

RS-232 port

Memory card input/output

Embedded ethernet ( 10 BASE )

Fast ethernet ( 100 BASE )

S

−

S

S

S

−

−

S

O

O

O

−

S

−

S

O

O

S

S

S

S

S

S

S

O

S

−

S

S

S

−

S

−

−

−

−

S

−

S

O

−

−

S

S

S

S

S

S

S

O

S: Standard O: Option–: Not Available C : Contact Goodway

Stationary guide bush

Revolving guide bush

Rotary Magic guide bush

Tungsten guide bush

GUIDE BUSH

SPINDLE

WORK HOLDING

POWER-DRIVE TOOL

CHIP DISPOSAL

COOLANT

Main spindle motor configuration

Rigid tapping

C-axis

Spindle brake

Spindle hardness collect

Spindle tungsten collect

Sub-spindle hardness collect

Sub-spindle tungsten collect

Special work holding chuck

Chip conveyor with auto timer

Chip cart with coolant drain

Oil mist collector

Milling unit

3-spindle front drilling unit

2-spindle front drilling unit

Thread whirling unit for outer

Polygon machining unit

Live tool for back

Bar feeder

Bar feeder interface

Parts catcher

Work piece transport conveyor

Long parts ejector

Coolant pump

High-pressure coolant system 1.5 MPA

Roll-out coolant tank

Oil skimmer

Coolant �ow switch

Coolant level switch

SD-16

SW-20

SW-32

Tri-color operation status light tower

Florescent work light

Electrical cabinet

Complete hydraulic system

Complete pneumatic system

Advanced auto lubrication system

Maintenance tool kit

Operation & maintenance manuals

A/C cooling system

SAFETY

31i

Oi - TD

S

S

O

−

S

S

S

S

S

S

O

S

S

S

S

S

S

S

O

S

S

S

S

S

AUTOMATIC OPERATION SUPPORT

SD-16

SW-20

SW-32

Specifications are subject to change without notice.


S: Standard O: Option–: Not Available C : Contact Goodway

9

10SD-16Model

Model

SW-20 SW-32

SD-16 SW-20 SW-32

Axes rapids

NC control

Spindle height

Coolant tank capacity

Machine dimenions

Machine weight

Working range

O.D. tools

I.D. tools

Side live tool

Main spindle

Max. machining diameter

Max. turning length per chuck

Number of tools

Size

Number of tools

Sleeve size

Max. drilling capacity

Max. tapping capacity

Number of tools

Max. speed

Servo motor output

Sleeve size

Max. drilling capacity

Max. tapping capacity

Max. end Mill capacity

Max. speed

Spindle motor output

Min. indexing increment

Rack-endmachiningcapability

Back workingtooling

Sub-spindle

Ø 20 mm

80 mm

30 mm

4

8,000 rpm

0.4 kW

Ø 8 mm

Ø 5 mm

M8 × P1.25

M4 × P0.7

8,000 rpm

1.5 / 2.2 kW

0.001°

Ø 16 mm

80 mm

30 mm

4

−

−

Ø 8

−

M6 × P1.0

−

8,000 rpm

0.55 / 1.1 kW

−

Ø 32 mm

130 mm

50 mm

4

5,000 rpm

0.75 kW

Ø 13 mm

Ø 6 mm

M10 × P1.25

M5 × P0.8

7,000 rpm

2.2 / 3.7 kW

0.001°

Ø 20 mm

207 mm

6

□12 mm

4

ER16

Ø 10 mm

M8 × P1.25

5 ~10

8,000 rpm

1.2 kW

ER 16

Ø 8 mm

M6 × P1.0

Ø 10 mm

10,000 rpm

2.2 / 3.7 kW

0.001°

24 m/min

FANUC Oi -TD

1,060 mm

150 L

2,385 × 1,250 × 1,730 mm

2,300 Kg

Ø 16 mm

175 mm

6 / 5 ( Opt. )

□12 mm

4

ER 16

Ø 10 mm

M8 × P1.25

2 / 3 ( Opt. )

8,000 rpm

0.4 kW

ER 11

Ø 6 mm

M5 × P0.8

Ø 7 mm

10,000 rpm

2.2 / 3.7 kW

0.088°

24 m/min

FANUC Oi -TD

1,075 mm

140 L

2,065 × 1,355 × 1,830 mm

2,000 Kg

Ø 32 mm

315 mm

6

□16 mm

4

ER 20

Ø 13 mm

M12 × P1.75

5 ~10

6,000 rpm

1.4 kW

ER 20

Ø 10 mm

M8 × P1.25

Ø 13 mm

7,000 rpm

5.5 / 7.5 kW

0.001°

24 m/min

FANUC 31i

1,060 mm

170 L

2,915 × 1,645 × 1,795 mm

3,200 Kg

MACHINE SPECIFICATIONS

Rear-end Machining

Max. chucking diameter

Max. length for front ejection

Max. parts projection length

Number of tools

Max. speed

Servo motor output

Drilling capacity ( Dead )

Drilling capacity ( Live )

Tapping capacity ( Dead )

Tapping capacity ( Live )

Max. speed

Sub-spindle motor output

Min. indexing increment


Specifications are subject to change without notice.

Copyr ight 2011 by Goodway Machine Corp. Al l r ight reservedG-SD/SW SERIES-EN-F-20110222

No.589, Chengyang Road,Xiang Cheng Economic Development District Suzhou City, Jiangsu, ChinaTEL : + 86-512-6576-3699FAX : + 86-512-6576-7299Website : www.goodwaycnc.com.cnE-mail : [email protected]

GOODWAY MACHINE CORP.GOODWAY (SUZHOU) MACHINE CORP.

No.13, 5Th Road,Taichung Industrial Park,Taichung City, 407, Taiwan, R.O.C.TEL : + 886-4-2359-1226FAX : + 886-4-2359-0536Website : www.goodwaycnc.comE-mail : [email protected]

No. 38, Keyuan Road, Central Taiwan Science Park.Taichung, Taichung City, 407, Taiwan, R.O.C.TEL : + 886-4-2463-6000FAX : + 886-4-2463-9600

Headquarters :

Central Taiwan Science Park Branch :

goodway machine corp. - omnitechnique · goodway swiss type machine ... all spindle and servo...

Documents