goulds iso series iso end suction centrifugal pump

8
Goulds ISO Series ISO End Suction Centrifugal Pump

Post on 22-Dec-2015

254 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: Goulds ISO Series ISO End Suction Centrifugal Pump

GouldsISO SeriesISO End Suction Centrifugal Pump

Page 2: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

Frame Mount Version

• Suitable for long coupled or belt driven motors.

Stub Shaft Version

• Suitable for direct attachment to 2 or 4 pole IEC frame motors.

Pumped Liquid

• Designed for non-combustible, low viscosity liquids, free of solids, abrasive materials and fibres. Various liquid chemical compositions are capable of being pumped through the use of a variety of construction materials and seal options.

Page 3: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

Pump Casing

• Highly efficient volute type casing adopted.

• Back-pullout design provides easy maintenance without disturbing the pipe work.

Impeller

• Fully enclosed, hydraulically designed for maximum efficiency and balanced for minimum vibration.

Shaft

• Heavy-duty stainless steel shaft for minimum deflection at high speed. The taper mount with keyed impeller provides positive locking and easy removal during servicing.

Page 4: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

Shaft Seal

• Mechanical type with excellent sealing performance. High temperature versions on request

Bearing

• High quality oversize bearings grease lubricated for general service. Oil lubrication option for high temperatures.

Page 5: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

Materials of Construction

Page 6: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

Materials of Construction

Page 7: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

Shaft Seal

• Mechanical type with excellent sealing performance. High temperature versions on request

Bearing

• High quality oversize bearings grease lubricated for general service. Oil lubrication option for high temperatures.

Page 8: Goulds ISO Series ISO End Suction Centrifugal Pump

Goulds GIS Series

International StandardPump is designed in accordance to ISO 2858.

Standard Flange DimensionAs 2129 Table “E” for Australia/NZ, ISO7005.21988 PN 16 bar, compatible with BS4504-1989, ISO 7005, 1-1992 & DIN 2533-1976 for Asia.

Pumped LiquidStandard designed for non-combustible, non-aggressive low viscosity liquids, free of solids, abrasive materials and fibers.

Performance RangeCapacity up to 900m3/hr.Head up to 160 meters

Discharge Port Size32 to 200 mm

Suction Port Size50 to 250 mm

Working Pressureup to 16 Bar

Liquid Temperature-15oC ~ 80oC (140oC special)