goulds pumps selection guide
TRANSCRIPT
Pump Selection GuideGoulds Pumps presents this Pump Selection Guide to assist users inmaking an easy initial selection of the best pump for a particular service.To do this, simply refer to the selection chart on page 3 where the full lineof Goulds, Vogel and Richter pumps are listed by pump type.For more details about your selection, refer to the page indicated.
Contact your nearest Goulds, Vogel or Richter sales office or representativefor a complete data package on any pump(s) in which you are interested.They will also furnish you with any information you require to assure properpump selection for optimum reliability and performance.
Goulds Pumps...Serving The World’s Industries
2 © 2002 Goulds Pumps
ChemicalThe family of chemical process pumps include both ANSI and ISO models. Unique non-metallic pumps offer distinctadvantages when handling severe corrosives. Magnetic drivepumps are designed for services where leakage cannot be
tolerated. Our complete understanding of chemicalprocessing and related industries gives us a clear advantagein finding solutions to these particular pumping problems.
Pulp And PaperGoulds leadership in the pulp and paper industry has beenlargely due to the success of our comprehensive range ofpumps that stand up to the harsh operating requirements ofthis industry. The Model 3175 has been prized forperformance since its introduction in 1968. Goulds latest
3180/3185 paper stock/process pump line extends theoffering farther for users with a preference for a metric pump.Other superior pumps include the 3500 medium consistencystock pump and a complete line of double suction andLoPulse fan pumps.
Mining And MineralsGoulds and Allis Chalmers dominance in the mining industrydates back to the latter 1800s. Designed for the most severeapplications, our pumps can be found in coal, aluminum,copper, clay, phosphate, potash, soda ash, salt, and goldmines throughout the world.
The widest range of corrosion and abrasion resistant slurrypumps in the industry is offered, including vertical, horizontaland submersible designs for cyclone feed, tailings disposal,mine dewatering, clarifier underflow, and sump services.
Power GenerationGoulds offers a wide variety of pumps designed specificallyfor uses within this industry. The Model 3600, the mostmodern axially split multi-stage pump in the world, is ideallysuited for boiler feed service. The 3310H segmented multi-stage pump is proven in over 1200 installations worldwide.
Vertical turbine and double suction pumps can handle themost demanding condensate or circulating water needs.Sumps can be cleared with Goulds line of vertical orsubmersible sump pumps. Also available are pumps forslurry, ash handling and other tough applications.
Oil Refining And Gas ProcessingThe Model 3700 API process pump has set performancestandards and contributed to Goulds leadership in thisindustry. For in-line services, Goulds offers the 3910 APIpump. Vertical turbine pumps are available in anyconfiguration including can pumps for low NPSH,
fire pumps and submersibles. Design and manufacturingcapabilities include standard commercial grades, ASMESection VIII, and API-610 (8th Edition) for total line capability.
Primary MetalsThe wide range of products makes Goulds the ideal choicefor the demanding services of this industry. Vertical andsubmersible abrasives handling, slurry pumps for scale pits,chemical pumps for pickle liquor and leaching solutions,
vertical turbines and double suction pumps for cooling towerand dewatering applications. Also, pumps for waste acid,scrubber service, and quench.
Water And WastewaterGoulds and Allis Chalmers offers the most comprehensiveline of double suction, end suction, multi-stage, non-clog andvertical turbine pumps for water supply, booster, low lift, andhigh lift. For non-clog solids handling,
a range of horizontal, vertical sump and submersible pumpshas helped professional engineers solve pollution problemsaround the world.
Food And BeverageAdhering to strict process requirements is only one of thereasons for Goulds entry into the forefront of these industries.Goulds pumps handle a wide variety of grain processing,
water, wastes, corrosives, and erosives. Breweries, bottlingcompanies, canneries and a multitude of food and liquidindustries rely on Goulds for successful operations.
3
Goulds makes the widest range of pumps in the industry — pumps to handle virtually any service.This selection chart is designed to help you find and specify the best pump for your service.Pump Selection Chart
Ideally Suited for Service Indicated* ®TEFZEL and TEFLON are registered trademarks for fluorpolymer resins, films and fibers made by DuPont.
PRO ServicesTM: Your Business Solution For...
PRO Services engineers and technicians are experienced withservicing all types of pumps and rotating equipment. Customersutilize PRO Services for commissioning, troubleshooting, andfield repairs of pumps, pumping systems and other pieces ofrotating equipment.
PRO Services engineers and technicians utilize state-of-the-art techniques and equipment to provide the highest level ofservice in the industry.
• Technical Expertise• Factory Trained Service Personnel• Fast Turnaround• Emergency Service – 24 hours/day, 7 days/week,
365 days/year• Quality• Safety Certified
Routine Maintenance ✲ Plant Shutdown ✲ Field Repair Contract Services ✲ Turnkey Service
PRO Service Centers: Worldwide...Wherever You Need Us.In The Shop...Or On The Road.
4
PUMPSMART®
PumpSmart® intelligent flow system significantly reduces life cycle costs of processpumping. PumpSmart is an advanced technology system that works with anycentrifugal pump utilizing a smart VFD controller and our proprietary control software.
ReliabilityLonger pump and seal life means reduced maintenance and downtime.
ControlImproved pumping accuracy and repeatability means better process control.
Operating CostVariable speed cuts energy cost up to 70%.
FlexibilityControl any centrifugal pump up to 700 HP.
PumpSmart may also eliminate the need for control valves, flow meters, recirculationpiping, and suction valves, reducing capital and installation costs.
CONTROL SOLUTIONS PS100
PS200
PS300
Model 3175
Model 3500
Model 3180/3185
Model 3181/3186
Paper Stock/ProcessFor the toughest services. Thousands of installations handle stock,solids, fibrous/stringy materials, abrasive slurries, and corrosives.Patented dynamic seal option eliminates mechanical seal problems.
l Capacities to 28,000 GPM (6360 m3/h)l Heads to 350 feet (107 m)l Temperatures to 450°F (232° C)l Pressures to 285 PSIG (1,965 kPa)
Materials: All Iron/316SS Trim, 316SS, 317SS, CD4MCu
27 Sizes
Paper Stock/ProcessAll customer requirements were considered in this line of paper stock/process pumps. . .excellenthydraulic coverage, high efficiency, extreme ease of maintenance, and mechanical reliability.
The Model 3185 pump furnished with ISO or JIS flange drilling, metric fasteners,dimensions. Open or enclosed impeller. Labyrinth seals standard.
Model 3180 standard with ANSI flanges.
l Capacities to 26,000 GPM (6000 m3/h)l Heads to 410 feet (125 m)l Temperatures to 446° F (230° C)l Pressures to 232 PSIG (1,600 kPa)
Materials:All Iron/316SS Trim,316SS, 317SS,CD4MCu
33 Sizes
High Temperature Paper Stock/ProcessEnd suction, top centerline discharge, self-venting. Centerline mounted for hightemperature services. High efficiency enclosed impeller. TaperBoreTM seal chamberstandard with mechanical seal arrangement.
l Capacities to 20,000 GPM (4,600 m3/h)l Heads to 410 feet (125 m)l Temperatures to 572° F (300° C)l Pressures to 360 PSIG (25 bar)
Materials: CD4MCu, 316SS, 317SS
23 Sizes
Medium Consistency SystemsThick paper stock pulp is pumped with the model 3500 mediumconsistency pumping system. System includes engineeredstandpipe, control valve, dilution header and level control.A patented air removal device removes air from the pulp toimprove mixing effectiveness.
Bleaching chemicals and oxygen are mixed in-line with the model3501 mixer with patended double shear rotor, optimized injectionport, and unique low pressure drop casing design. World’s highestrecorded mixing effectiveness!
l Consistencies from 8% to 16%l Capacities to 2,000 adst/dl Pressures to 230 PSIG (16 bar)l Materials from Titanium to 317SS
5
Model NM 3171
Model 3171
Vertical Sump and ProcessThe “Veteran” vertical sump and processpump. Thousands of installations —industrial process, sump drainage,corrosive liquids, pollution control, molten salts. Rugged, heavy construction. Simple mounting.
l Capacities to 3,180GPM (722 m3/h)
l Heads to310 feet (95 m)
l Temperatures to450° F (232° C)
l Pit Depths to20 feet (6 m)
Materials: Cast Iron, Bronze-fitted, CD4MCu, 316SS, Alloy 20, Hastelloy B and C
21 Sizes
FRP Vertical Sump/ProcessFor severe corrosive applications. Casing and impellerinterchangeable with Model NM3196. Cost-effective alternative tohigh alloys.
l Capacities to 1,250 GPM(284 m3/h)
l Heads to 300 feet (92 m)l Temperatures to
200° F (79° C)l Pit Depths to 16 feet (5 m)
Material: High-strength,Corrosion-resistantGMP-2000*
13 Sizes*Proprietary molding process/material GMP-2000
Model CV 3171
Vertical Sump and ProcessThe CV 3171 is a recessed impeller,circular volute type sump pump.Ideal for large solids and shearsensitive fluids. Circular volute minimizes radial loads making thisthe ideal pump for low flow process applications.
l Capacities to 1,300GPM (295 m3/h)
l Heads to230 feet (126 m)
l Temperatures to450° F (232° C)
l Pit Depths to 20 feet (6 m)
Materials: Cast Iron, CD4MCu, 316SS, Alloy 20, Hastelloy B and C
6 Sizes
P R O C E S S P U M P S
A N S I P R O C E S S P U M P S
Model 3196 Model HT 3196
ANSI ProcessThis is the original ANSI pump that has become the standard of the industry. Over 600,000installations attest to the remarkable performance of the 3196.
Available with a wide range of ANSIPLUSTM features for handling difficultapplications. X-Series power endsprovide standard features for improvedbearing and mechanical seal life.
l Capacities to 6,000 GPM (1364 m3/h)l Heads to 730 feet (222 m)l Temperatures to 500° F (260° C)l Pressures to 375 PSIG
(2586 kPa)
Materials: Ductile Iron, 316SS,CD4MCu, Alloy 20, Monel, Nickel,Hastelloy B and C, Titanium
29 Sizes
ANSI High Temperature Process PumpCenterline mounted in a heavy duty fabricated steel casing support, the Model HT 3196minimizes shaft misalignment and piping strain associated with elevated temperatures upto 700° F., this eighth member of the ANSI pump family features Goulds’ premierX-Series power end, multiple seal chamber options including the Taper BoreTM Plus, and a wide variety of rigid and rugged mounting systems.
l Capacities to 4,500 GPM (1,023 m3/h)l Heads to 925 feet (282 m)l Temperature to 700° F (372° C)l Pressures to 450 PSIG (3,102 kPa)
Materials: Carbon Steel, 316SS, CD4MCu, Alloy 20, Hastelloy C
MTX
STX
Model LF 3196
Low Flow ANSI ProcessDesigned specifically to provide superior performance for low flow services. Features aconcentric (circular volute) casing and open radial vane impeller to eliminate hydraulic andmechanical problems at low flows. X-Series power ends.
l Capacities to 220 GPM (50 m3/h)l Heads to 925 feet (282 m)l Temperatures to 700° F (372° C)l Pressures to 450 PSIG (3102 kPa)
Materials: Ductile Iron,316SS, CD4MCu, Alloy20, Hastelloy B and C
4 Sizes
6
Model 3796
Model 3996
In-Line ANSI ProcessFor corrosives, abrasives, and hightemperature. Fully open impeller,back pull-out design, heavy dutyconstruction. Field alignmentnot required.
l Capacities to 1,500 GPM (340 m3/h)l Heads to 700 feet (213 m)l Temperatures to 500° F (260° C)l Pressures to 375 PSIG (2585 kPa)
Materials: Ductile Iron, 316SS,Alloy 20, Monel, Nickel, Hastelloy Band C, CD4MCu, Titanium
13 Sizes
Self-Priming ANSI ProcessOne-piece casing eliminates need for separate priming chamber, airseparator, valves, or by-pass line. Fully open impeller can be trimmed to meet specific hydraulic requirements. X-Series power ends.
l Capacities to 1,250 GPM (284 m3/h)l Heads to 430 feet (131 m)l Temperatures to 500° F (260° C)l Suction Lifts to 25 feet (7.6 m)
Materials: Ductile Iron, 316SS, CD4MCu, Alloy 20,Hastelloy B and C, Titanium
8 Sizes
A N S I P R O C E S S P U M P S
Model CV 3196
Non-Clog ANSI ProcessPerfect solution for handling bulky, fibrous, or shear-sensitive liquids. Recessed impellerdesign provides non-clog pumping withminimum solids degradation. Capability tohandle liquids containing 10 to 20 percentair/gas. X-Series power ends.
Materials: Ductile Iron,CD4MCu, Alloy 20,Hastelloy B and C
7 Sizes
l Capacities to 2,700 GPM (610 m3/h)l Heads to 440 feet (134 m)l Temperatures to 500° F (260° C)l Pressures to 285 PSIG (1965 kPa)
28 Sizes
Self Priming LinedWhen suction pressure is negative and air or gases must beevacuated to accomplish pump priming, the SP 3298 has a self-priming dual volute that primes on demand with only an initialcharge of liquid in the casing. Priming is accomplished within thecasing, eliminating the need for auxiliary priming systems.
l Capacities to 275 GPM (63 m3/h)l Heads to 150 feet (46 m)l Temperatures to 250° F (121° C)l Pressures to 175 PSIG (1207 kPa)l Effective Static Lift to 20 feet (6m)
Lining Material: Tefzel® (ETFE)
2 Sizes
Model 3298/3299
Model NM 3196
FRP ANSI ProcessAll liquid end parts constructed of vinylester thermoset resin –industry’s choice for moderate corrosives. True volute design, one-piece casing with fully open impeller. Utilizes X-Series power endsfor maximum interchangeability, conformity to ANSI dimensionalstandards. Corrosion resistant FRP baseplate standard.
l Capacities to 800 GPM (182 m3/h)l Heads to 500 feet (152 m)l Temperatures to 200° F (93° C)l Pressures to 220 PSIG (1517 kPa)
Material: High Strength, CorrosionResistant GMP-2000*
*Proprietary molding process/material GMP-2000
7
Vertical ANSI Lined ProcessIdeal for moderate to severecorrosives. With or without solids, the3298 can handle the tough chemicalservices. As a sealless design, it’s aneffective alternative to pumps withmechanical seal problems.Meets strictest EPA regulations.
l Capacities to 1,200 GPM (270 m3/h)l Heads to 425 feet (129 m)l Temperatures to 250°F (121°C)l Pressures to 225 PSIG (1551 kPa)
Materials: Tefzel® (ETFE) Construction
4 Sizes
Magnetic Drive ANSI LinedDesigned to handle moderate tosevere corrosives with or withoutsolids. Sealless design provideseffective alternative to pumps withmechanical seal problems. Thicklinings for extended pump life.
l Capacities to 1,200 GPM (270 m3/h)l Heads to 530 feet (161 m)l Temperatures to 360° F (180° C)l Pressures to 275 PSIG (1896 kPa)
3299
3298
Magnetic Drive ANSI ProcessFor zero leakage services— volatile organic chemicals, liquified gas,explosive liquids, carcinogens, hazardous services. Designed withsafety as the primary consideration. Meets ANSI dimensionalspecifications. Containment shell temperature sensor standard,other pump protection devices for safety available.
l Capacities up to 700 GPM (159 m3/h)l Heads to 440 feet (134 m)l Temperatures to 425° F (315° C)l Pressures to 285 PSIG (1965 kPa)
Materials: 316SS,Alloy 20, Hastelloy C
13 Sizes
Model 3296
Lining Material: 3298 – Tefzel® (ETFE)3299 – PFA5 Sizes
Model V 3298
Model SP 3298
Model 3198
PFA Process ANSI LinedVirgin PFA TEFLON® for handling a wide range of severe corrosiveliquids, trace contaminants, andmixtures. The 3198 features ANSIB73.1 design, X-Series power ends.TEFLON® molded in place by high pressure technique andmechanically locked.
l Capacities to 800 GPM (182 m3/h)l Heads to 450 feet (137 m)l Temperatures to 300° F (150° C)l Pressures to 225 PSIG (1550 kPa)
Material: PFA Teflon®
5 Sizes
Model 3200
Light Duty SeallessDesigned specifically to handle moderate corrosive services. It’sideally suited for low pressure batch process or transfer services.Meets strictest EPA requirements.
l Capacities to 175 GPM (40 m3/h)l Heads to 130 feet (39 m)l Temperatures to 180° F (82° C)l Pressures to 35 PSIG (241 kPa)l Viscosities to 50 centipoise
Materials: Polypropylene (PVDF optional)
3 Sizes
13 Sizes
15 Sizes
I S O P R O C E S S P U M P S
8
Model ICB
Close-coupled ISO Process PumpThe ICB Series is an extension to the IC series ISO 5199 framemounted chemical pump series. These new pumps provide a compactand economical pumping solution ideal for OEM applications andconfined spaces in industrial processes. No spacer coupling oralignment is required, reducing capital equipment costs and simplifyinginstallation and maintenance. ICB pumps are fitted with our patentedCyclone Seal Chamber, proven to provide the optimum sealingenvironment for extended mechanical seal life.
l Capacities to 1,980 GPM (450 m3/h)l Heads to 492 feet (150 m)l Temperature ranges from
-40° F to 284° F (-40° C to 140° C)l Pressures to 230 PSIG (16 bar)
Materials: Ductile Iron, Stainless Steel
I S O P R O C E S S P U M P S
Model Richter SCK
ISO Lined Heavy Duty Sealed ProcessThe SCK is a robust lined process pump for aggressive liquid handling.All wetted parts are lined with a thick layer of PTFE, PFA, PP or PE-UHMWdepending on your requirements.
l Capacities to 1,500 GPM (350 m3/h)l Heads to 290 feet (90 m)l Temperatures to 360° F (180° C)l Pressures to 235 PSIG (16 bar)
Lining Material: PTFE, PFA, PP, PE-UHMW.
Model Richter MDK Model Richter MPB/F
ISO Lined SeallessModel MDK for use with media where stainless steel does not have sufficient corrosion resistance.Used as an alternative to pumps made of expensive exotic metals, plastic-lined mechanical seal pumps, stainlesssteel pumps with liquid-sealed doublemechanical seals, and stainless steelmagnetic drive pumps. Available in frame-mounted or close coupled design.
l Capacities to 420 GPM (95 m3/h)
l Heads to 280 feet (85 m)l Temperatures to 250° F (120° C)l Pressures to 235 PSIG (16 bar)
Materials: FEP, PP
MDK–8 Sizes
Lined Peripheral with Magnetic DriveModel MPB/F features heavy-duty design andinnovative PTFE peripheralimpeller for use in low-flow,severe corrosive environments.All wetted parts lined withPFA/PTFE, SiC.
MPB/F–1 Size
l Capacities to 17 GPM (4 m3/h)l Heads to 384 feet (115 m)l Temperatures to 300° F (150° C)l Pressures to 235 PSIG (16 bar)
Materials: PFA/PTFE
Model IC
ISO ProcessThis series is designed in accordance with ISO 5199 and ISO 2858,making it ideal for worldwide chemical or industrial process applications. ICpumps are fitted with a patented seal chamber design called the Cycloneseal chamber, which has been proven to provide the optimum sealingenvironment for extended mechanical seal life.
l Capacities to 1,980 GPM (450 m3/h)l Heads to 482 feet (150 m)l Temperature ranges from
-40° F to 350˚ F (-40° C to 177° C)l Pressures to 235 PSIG (16 bar)
Materials: Ductile Iron, 316SS, Duplex Stainless, Alloy 20, Hastelloy C and Titanium.
34 Sizes
29 Sizes
Model ICM
ISO Metallic Magnetic Drive ProcessThe ICM pump is the optimum metallic sealless pump for process fluidservices in the chemical, paper, and general industries where ISOdimensions are preferred. The ICM is specifically designed to pumpdifficult fluids such as corrosives, pure, and toxic liquids. Its sealless,sturdy design combines with a wide variety of wet end materials. Thebearings are chemical and abrasion resistant Silicon Carbide (SSiC). Optional SAFEGLIDE®
PLUS dry-run protection can be provided.
l Capacities to 1,760 GPM (400 m3/h)l Heads to 685 feet (210 m) at 3,500 rpml Temperature ranges from
-40° F to 360° F (-40° C to 180° C)l Pressures to 232 PSIG (16 bar)
Materials: Stainless Steel, Hastelloy, Ductile Iron, Alloy 20 and Titanium
Model ICP
High Temperature ISO Process PumpThe ICP is a heavy duty chemical process pump designed forextreme temperatures and pressures. The ICP complies with ISOstandards and features the patented Cyclone Seal Chamber forextended seal service life. Centerline casing design is self venting.Large capacity oil sump provides maximum bearing cooling. Optionalinducer reduces NPSHr.
l Capacities to 1,980 GPM (450 m3/h)l Heads to 492 feet (150 m)l Temperature ranges from
-40° F to 535° F (-40° C to 280° C)l Pressures to 363 PSIG (25 bar)
Materials: Carbon Steel, Stainless Steel, Duplex Stainless Steel and Hastelloy C
34 Sizes
22 Sizes
SCK–11 Sizes
Model MNK
Model MNK-X/SCK-X
Model ICMP
Model MNK-S/SCK-S
9
ISO Heavy Duty Lined Sealless for Chemical ServicesThe MNK is the lined magnetic drive process pump with thebroadcast population of its kind worldwide. The MNK familyoffers the most extensive application range available. Eddy-current-free. Bearings silicon carbide SSIC with SAFEGLIDE®
PLUS option. Ideal for tough process conditions.
MNK–12 Sizes
ICMP–22 Sizes
l Capacities to 1,200 GPM (280 m3/h)at 3,500 rpm
l Heads to 300 feet (90 m) at 3,500 rpm
l Temperatures to 360° F (180° C)
l Pressures to 235 PSIG (16 bar)
Materials:PFA/PTFE, PE-UHMW, PP
High Temperature ISO Metallic Magnetic Drive ProcessThe ICMP is a heavy-duty metallic sealless pump for applicationswith high temperature and pressure conditions. It is designed foraggressive, toxic and pure media. The centerline casing is optimalfor the compensation of dimensional changes due to temperaturefluctuations. SSIC silicon carbide plain bearings, optionally withSAFEGLIDE® PLUS dry run protection. Unique cartridge plainbearing design. Inducer option.
Lined Vortex Process PumpDesigned for pumping media with higher solidcontents up to 50% and gas contents up to 5%.Special recessed vortex impeller. Magnetic driveor mechanical seal.
Lined Self-Priming Heavy-Duty Process PumpSturdy design. Primes up to 6 m against back pressures of up to18 m LC. One-piece housing with integral air separation. Alsosuits to convey liquids with gas content up to 30%. Magneticdrive or mechanical seal.
l Capacities to 1,760 gpm (400 m3/h)
l Heads to 685 ft (210 m) at 3500 rpm
l Temperature ranges from - 40° F to 535° F (- 40° C to 280° C)
l Pressures to 365 PSIG (25 bar)
Materials:Stainless Steel, Hastelloy, Cast Iron, Alloy 20, Titanium
l Capacities to 1,100 gpm (260 m3/h)
l Heads to 298 ft (90 m) at 3500 rpm
l Temperatures to 360° F (180° C)
l Pressures to 235 PSIG (16 bar)
Materials: PFA/PTFE, PE-UHMW
l Capacities to 176 gpm (40 m3/h)
l Heads to 200 ft (60 m) at 3500 rpm
l Temperatures to 300° F (150° C)
l Pressures to 145 PSIG (10 bar)
Materials: PFA/PTFE
MNK-X–11 Sizes MNK-S–1 Size
A P I P R O C E S S P U M P S
Models 3700 & 3710
Model 3620
Model 3640
Model Vogel CPR
Model 3910
API-610 (8th Edition) Process High temperature and high pressure process pumps designed tofully meet the requirements of API-610 (8th Edition). Centerlinesupport for high temperature stability, maximum rigidity. Tangentialdischarge for maximum hydraulic efficiency.
Available in top suction design (Model 3710).
l Capacities to 6,500 GPM (1,475 m3/h)l Heads to 1,150 feet (350 m)l Temperatures to 800° F (427° C)l Pressures from full vacuum to 870 PSIG (6,000 kPa)
Materials: Carbon Steel, 12% Chrome, 316SS, Duplex SS,other high alloys
35 Sizes
Bearing Frame In-LineHigh pressure, high temperatureservices meets API-610 requirements.Back pull-out for ease of maintenance.Bearing frame carries pump loads.
l Capacities to 7,500 GPM(1,700 m3/h)
l Heads to 750 feet (229 m)l Temperatures to 650° F (343° C)l Pressures to 595 PSIG (4,100 kPa)
Materials: Carbon Steel,12% Chrome, 316LSS,Duplex SS, otherhigher alloys
28 Sizes
High Temperature Double Suction Between bearings, radially split process pumps designed for smooth, reliable operation.Fully meets requirements of API-610.
l Capacities to 20,000 GPM (4,540 m3/h)l Heads to 1,500 feet (455 m)l Temperatures to 850° F (455° C)l Pressures to 1,000 PSIG (6,895 kPa)
Materials: Carbon Steel, 12% Chrome, 316LSS, Duplex SS, other higher alloys
24 Sizes
High Temperature Two-StageBetween bearings, radially split process pumps designed for smooth, reliableoperation. Meets toughest specification requirements of API-610.
l Capacities to 1,500 GPM (340 m3/h)l Heads to 1,400 feet (425 m)l Temperatures to 850° F (455° C)l Pressures to 750 PSIG (5,170 kPa)
Materials: Carbon Steel, 12% Chrome, 316LSS,Duplex SS, other higher alloys
6 Sizes
40 Bar Process API-610 Nominal Complientl Capacities to 8,800 GPM (1,800 m3/h)l Heads to 850 feet (260 m)l Temperatures to 660° F (350° C)l Pressures to 600 PSI (40 bar)l Sizes: DN 40 up to DN 300 (1 1/2” to 12”)l Inducers available for low NPSH requirementsRefer to maximum pressure chart above 212° F/100° C
Materials: Carbon Steel, 12% Chrome, 316SS, Duplex SS,other high alloys
40 Sizes
10
A P I P R O C E S S P U M P S
A B R A S I V E S / S O L I D S H A N D L I N G
Medium Duty SlurryIdeal for most medium duty abrasiveand/or corrosive slurry services.Extra thick wet end componentsextend wear life. Replaceable wearliner for low maintenance cost.Available with dynamic seal forelimination of seal problems,reduced maintenance. Variety ofdrive arrangements available forapplication flexibility.
l Capacities to 7,000 GPM (1,600 m3/h)
l Heads to 240 feet (73 m)l Temperatures to 250° F (120° C)l Pressures to 150 PSIG (1,034 kPa)l Solids to 2.25 inches (57 mm)
Materials: Cast Iron, HC600,316SS, CD4MCu
15 Sizes
Model 5000 and RX
Model Slurry Pro ®
Model SRL/SRL-C/SRL-XT
Model JC
Model 5500
Model HS
Rubber-LinedAbrasive SlurryFeatures wear resistant rubber liners for maximum wear life. The SRL isdesigned for ease of maintenance,and to handle the toughestabrasive slurries.
l Capacities to 20,000 GPM(4,540 m3/h)
l Heads to 150 feet (46 m)l Temperatures to 170° F (76° C)l Pressures to 268 PSIG (1,847 kPa)
Lining Materials: Natural Rubber,Neoprene, Nitrile, Polyurethane,Hypalon
16 Sizes
Side Suction Abrasive SlurryHeavy duty pumps designed for economical handling of highly concentratedabrasive slurries at high heads with low speeds. These pumps have gainedunparalleled acceptance in the coal preparation, alumina and concrete industriesbecause of their reliability and extreme ease of maintenance.
l Capacities to 7,500 GPM (1,700 m3/h)l Heads to 350 feet (107 m)l Pressures to 300 PSIG (2,068 kPa)l Solids to 3.375 inches (86 mm)
Materials: HC600, 316SS,CD4MCu
28 Sizes
Heavy Duty SlurryEnd suction design for pumping abrasive slurries and large solids. Impeller withrear pump-out vanes enhances solids handling capability. Extra thick liquid end parts for extended wear. Many up-time features for maximum life under severe conditions.
l Capacities to 3,000 GPM (680 m3/h)l Heads to 350 feet (107 m)l Temperatures to 200° F (93° C)l Pressures to 150 PSIG (1034 kPa)l Solids to 9 inches (228 mm)
Materials: High Chrome Iron and other castable metallurgies
7 Sizes
Severe Duty SlurryThe “Workhorse” of severe duty slurry pumps. It’s notonly built to stand up to the toughest services, but theModel 5500 is also designed for extreme ease ofmaintenance. A heavy duty power end, extra thick wallsections, and easily replaceable wear parts add up tolong, reliable operation.
l Capacities to 17,000 GPM (3,861 m3/h)l Heads to 425 feet (139 m)l Temperatures to 250° F (121° C)l Pressures to 500 PSIG (3,448 kPa)l Solids to 5 inches (127 mm)
Materials: HC600, CD4MCu
20 Sizes
Hydro-Solids For handling sludges and slurries containing large solids, entrained air, fibrous materials,corrosives and abrasives. Features recessed, non-clog impeller. Also available in verticaldrypit (Model HSD) design.
l Capacities to 7,000 GPM (1,590 m3/h)l Heads to 140 feet (43 m)l Temperatures to 200° F (93° C)l Pressures to 100 PSIG (690 kPa)l Solids to 10 inches (254 mm)
Materials: Cast Iron, High Chrome Iron, 316SS, CD4MCu
7 Sizes
11
A B R A S I V E S / S O L I D S H A N D L I N G
Centrifugal Diffuser Multi-StageDiffuser type multi-stage pumps for a wide range of lowflow, high head services. High efficiency design.
l Capacities to 280 GPM (64 m3/h)l Heads to 2,500 feet (762 m)l Temperatures to 400° F (204° C)l Pressures to 1,100 PSIG (7,584 kPa)
Materials: Carbon Steel, 316SS
10 Sizes
M U L T I - S T A G E / D O U B L E S U C T I O N
High Pressure Multi-Stage Radially split, segmented multi-stage pump; a proven state-of-the-art design for the most demanding high pressure services.Many special features for application flexibility. Ideal forcogeneration, boiler feed, reverse osmosis, booster, water, oil.
l Capacities to 1,200 GPM (272 m3/h)l Heads to 5,400 feet (1,646 m)l Temperatures to 374° F (190° C)l Pressures to 2,465 PSIG (17,000 kPa)
Materials: Carbon Steel/Cast Iron, Carbon Steel/12%Chrome Trim, All 12% Chrome
4 Sizes
Heavy Duty Multi-Stage Advanced design with proven operating history.Axially split, with many enhanced features that make it an extremely reliable, high performance pump wellsuited to a wide range of services.
l Capacities to 2,600 GPM (590 m3/h)l Heads to 5,500 feet (1,675 m)l Temperatures to 400° F (205° C)l Pressures to 2,500 PSIG (17,238 kPa)
Materials: Carbon Steel, 12% Chrome, 316LSS,Duplex SS
7 Sizes
Model 3600 Model 3310H/3311
Model 3335 Model 3935
Centrifugal Diffuser Multi-StageCentrifugal diffuser type multi-stage pumps well suited forboiler feed, reverse osmosis, petrochemical andhydrocarbon services.
l Capacities to 140 GPM (32 m3/h)l Heads to 2,600 feet (792 m)l Temperatures to 400° F (204° C)l Pressures to 1,500 PSIG (10,340 kPa)
Material: Carbon Steel
4 Sizes
12
M U L T I - S T A G E / D O U B L E S U C T I O N
Multi-StageMulti-stage ring section pump designed for high pressureservices including; boiler feed, reverse osmosis, showerservice, plus much more.
l Capacities to 1,500 USGPM (340 m3/h)l Heads to 1,640 feet (500 m)l Max. speed to 3,600 rpm (3,600 min-1)l Discharge from 1 1/2” to 5”l Temperatures to 280° F (140° C)l Pressures to 800 PSIG (55 bar)*
Materials: Cast Iron, Stainless Steel, Stainless Fitted
8 Sizes
Two-Stage SplitcaseHorizontal split case pumps ideally suited for boiler feed,mine dewatering, and other services requiring moderatelyhigh heads with a wide range of operating conditions.
l Capacities up to 3,000 GPM (681 m3/h)l Heads to 1,000 feet (305 m)l Temperatures to 350° F (177° C)l Pressures to 550 PSIG (3,792 kPa)
Materials: Bronze-fitted, Cast Iron, Bronze, 316SS
9 Sizes
Model 3316
Horizontal Split Case, Double SuctionDesigned for a wide range of industrial, municipal, and marine services.
l Capacities to 225,000 GPM (51,098 m3/h)l Heads to 900 feet (274 m)l Suction sizes to 78” and discharge sizes to 66”l Working pressures to 400 PSIG (2,758kPa)l Temperatures to 350° F (177° C)
Materials: Cast Iron/Bronze, All Iron, All Bronze, Cast Iron/Stainless Steel, All Stainless Steel
SMALL CAPACITYModel 3410
(to 7,000 GPM/1,590 m3/h)
MEDIUM CAPACITYModel 3409
(to 12,000 GPM/2,725 m3/h)
LARGE CAPACITYModel 3420
(to 65,000 GPM/14,762 m3/h)
EXTRA LARGE CAPACITYModel 3498
(to 225,000 GPM/51,098 m3/h)
Model 3400 Series
Model 3355
13
S U M P / A B R A S I V E S / S O L I D S H A N D L I N G
Vertical CantileverIdeal for range of tough sump services... abrasiveslurries— mine slurry, fly ash, foundry sand, clay, coalprep, power plants, or large solids handling.
Model 5100 – 14 Sizesl 7,500 GPM (1,703 m3/h)l Heads to 240 feet (73 m)l Solids to 3.375 inches (86 mm)
Materials: High Chrome Iron, 316SS
Models 5150/VJC – 20 Sizesl Capacities to 7,500 GPM (1,703 m3/h)l Heads to 260 feet (79 m)l Solids to 3.875 inches (98 mm)
Materials: Cast Iron,High Chrome Iron, 316SS
5150/VJC
5100
VHS
Whirl-Flo ® Prime Line
Model HSU, HSUA, HSUL, JCUModel VHS, 5100, 5150, VJC
Model VHS – 7 Sizesl Capacities to 7,000 GPM
(1,590 m3/h)l Heads to 140 feet (43 m)l Solids to 10 inches (254 mm)
Materials: Cast Iron,High Chrome Iron, 316SS
Submersible Four different models allow selection of very best pump forthe service conditions whether large, stringy, fibrous solids,or abrasive slurries.
l Capacities to 4,000 GPM (910 m3/h)l Heads to 220 feet (67 m)l Temperatures to 194° F (90° C)l Solids to 6 inches (152 mm)
Materials: Cast Iron, 28% Chrome Iron, CD4MCu, 316SS
HSU HSUA
Industrial DutySelf-Priming For tank unloading, sump and othersuction lift applications, Goulds offersa complete line of heavy duty selfpriming pumps which providedependable, trouble-free operation.The Prime Line pumps offer highcapacity, versatile options forhandling chemicals, oils, andwastewater.
l Capacities to 7,000 GPM(1,600 m3/h)
l Heads to 280 feet (85 m)l Temperatures to 250° F (120° C)l Suction Lifts to 25 feet (7.6 m)
Materials: Cast Iron, Bronze Fitted,316SS Fitted
End Suction RecessedImpellerThese rugged pumps are capable ofpassing port sized spherical solids,slurries, stringy matters, and soft solidswith clog-free dependability. Fullyrecessed impellers provide a straightflow path through the Whirl-Flo forunsurpassed solids handling and nocasing wear. Whirl-Flo is available ina variety of metallurgies to handlea range of abrasive andcorrosive liquids.
l Capacities to 2,400 GPM (550 m3/h)l Heads to 340 feet (102 m)l Temperatures to 250° F (120° C)
Materials: Cast Iron, HC600,316 Stainless Steel
14
Solids Handling Self-Priming Goulds Trash Hog is designed forsuperior solids handling capability,optimum pump performance, andextreme ease of maintenance for awide range of industrial, pulp and paper,mining, and wastewater services.Whether handling sludge, debris orplant wastes, there’s no other pumpthat compares to the Trash Hog.
l Capacities to 6,000 GPM (1,363 m3/h)l Heads to 140 feet (43 m)l Temperatures to 225° F (107° C)l Pressures to 85 PSIG (586 kPa)l Suction Lifts to 25 feet (7.6 m)l Spherical solids to 3 inches (76 mm)
Materials: Cast Iron, Stainless Steel,CD4MCu, HC600 Fitted
Trash Hog ®
S U M P / A B R A S I V E S / S O L I D S H A N D L I N G
Model VMP
Vertical MarineGoulds Model VMP Autoprime pump is anautomatically self-priming unit designedspecially for efficient unloading and stripping ofproduct tankers and barges.
l Capacities to 20,000 GPM (4,542 m3/h)l Heads to 635 feet (194 m)l Temperatures to 250° F (120° C)
Vertical Industrial Turbine andVertical Can-Type A wide range of hydraulic conditions allows meetingrequirements of virtually every pumping service. Designed tomeet custom specifications of the user. Model VIC can-typeturbine meets API-610 specifications.
Model VITl Capacities to 65,000 GPM
(14,762 m3/h)l Heads to 3,500 feet
(1067 m)l Temperatures to 450° F
(232° C)
Model VICl Capacities to 80,000 GPM
(18,168 m3/h)l Heads to 3,500 feet
(1,070 m)l Temperatures to 500° F
(260° C)
Materials: Any Machineable Alloy
VICVIT
Model VIT & VIC
Model VIS
Vertical Submersible For deep settings or where use of lineshaftpumps is impractical. For irrigation, servicewater, deep well supply, offshore and minedewatering.
l Capacities to 4,000 GPM (908 m3/h)l Heads to 1,400 feet (427 m)
Materials:Any Machineable Alloy
15
G E N E R A L S E R V I C E / V E R T I C A LG E N E R A L S E R V I C E / V E R T I C A L
Model AF
Axial FlowFor continuous circulation of corrosive/abrasive solutions, slurries,and process wastes. Fabricated elbow or cast elbow designsavailable. Unmatched for low head, high capacity pumping.
l Capacities to 200,000 GPM (35,000 m3/h)l Heads to 30 feet (9 m)l Temperatures to 350° F (180° C)l Pressures to 150 PSIG (1034 kPa)l Solids to 9 inches (228 mm)
Materials: Cast Iron, 304SS, 316SS, CD4MCu, Nickel, Monel, Alloy 20, UHB-904L, Titanium, Hastelloy, Sanicro 28
12 Sizes
Form No. BRPSG 6/02
Whether it’s for severe corrosives,abrasive slurries, fibrous/stringy solids,
high temperature liquids, hazardousfluids, low flow or high capacity
services – Goulds has a perfect,reliable solution. The Goulds selection
of fluid solutions includes horizontal and vertical configurations in a range
of alloy and non-metallic constructions,sealed and sealless. Goulds wide
range of products ensures that we have the right pump for virtually
every application.
2A LIQUID PROPERTIES
Liquid: __________________Vapor Pressure: __________Specific Heat: ____________Viscosity:________________Solids Size/Content: _______Specific Gravity: __________Temperature:_____________Characteristics: (flammable,explosive, carcinogenic, toxic,noxious, regulated, etc.):__________________________
The following Pump Selection Checklist is designed to assist users in reviewing most pump requirements for ultimate selectionof the best pump. Your Goulds representative has been specially trained in pump application and should be contacted to assistin final pump selection for optimum reliability and safety.
Pump Selection Checklist
1B
Pump Size _____________Impeller diameter ________HP, efficiency ___________NPSHR ________________Minimum Pump Flow _____Speed (RPM) ___________
2B
Materials ofConstruction ____________Bearing cooling__________Sealing/flushingrequirements____________Jacketing forcooling/heating __________
3B
Explosion-proof enclosures______________________
Safety protection options______________________
Coupling guard options______________________
Casing drain ____________Flange options __________O-ring materials _________
4B
Type of lubrication _______Start-up assistance_______Operator training_________Maintenance training _____Baseplate options________Oil seal options__________
1A SYSTEM
Service:________________Capacity:_______________Total Dynamic Head: _____NPSH Available: _________Suction Pressure: ________Minimum Flow Rate:______Total Working Pressure: ___
3A SAFETY/ENVIRONMENTAL
l UL label (explosion-proof enclosures)
l Regulations (government, local, plant)
l Temperature limitsl Fugitive emission limitsl Product purityl Best Available Control
Technologyl Reporting requirements
4A ECONOMY/RELIABILITY
l MTBF requirementsl Lubricationl Cooling/Heatingl Operator experiencel Operator maintenancel Extra product filteringl Ease of installation
Pick Your Perfect Process PumpI.
RE
QU
IRE
ME
NTS
II.P
UM
P
© 2002 Goulds Pumps, IncorporatedA subsidiary of ITT Industries, Inc.
Visit our website at www.gouldspumps.com