goulds rev psg

Pump Selection Guide

2

Pump Selection GuideGoulds Pumps presents this Pump Selection Guide to assist usersin making an easy initial selection of the best pump for a particularservice. To do this, simply refer to the selection chart on page 3where the full line of Goulds pumps are listed by pump type.

For more details about your selection, refer to the page indicated.

Contact your nearest Goulds, sales office or representative for acomplete data package on any pump(s) in which you are interested.They will also furnish you with any information you require to assureproper pump selection for optimum reliability and performance.

Goulds Pumps...Serving The World’s IndustriesChemicalThe family of chemical process pumps includes both ANSI and ISO models. Goulds specializes in high alloys for ourchemical pumps ranging from 316SS to Zirconium and evenspecial alloys if needed. Unique non-metallic pumps offerdistinct advantages when handling severe corrosives.

Magnetic drive pumps are designed for services where leakage cannot be tolerated. Our complete understanding of chemical processing and related industries gives us aclear advantage in finding solutions to these particularpumping problems.

Pulp and PaperGoulds leadership in the pulp and paper industry has beenlargely due to the success of our comprehensive range ofpumps that stand up to the harsh operating requirements ofthis industry. The Model 3175 has been prized forperformance since its introduction in 1968. Goulds latest

3180/3185 paper stock/process pump line extends theoffering farther for users with a preference for a metric pump.Other superior pumps include the 3500XD enhancedperformance medium consistency stock pump and acomplete line of double suction and LoPulse fan pumps.

Mining And MineralsGoulds dominance in the mining industry dates back to thelatter 1800s. Designed for the most severe applications, ourpumps can be found in coal, aluminum, copper, iron, clay,phosphate, potash, soda ash, salt, gold and aggregateindustries throughout the world.

Goulds offers the widest range of rubber-lined and metalcorrosion / abrasion-resistant slurry pumps in the industry,including vertical, horizontal and submersible designs forcyclone feed, tailings disposal, minerals processing, minedewatering, clarifier underflow, oil sands and sump services.

Power GenerationGoulds offers a wide variety of pumps designed specificallyfor uses within this industry. The Model 3600, the mostmodern axially split multi-stage pump in the world, is ideallysuited for boiler feed service. The 3310H segmented multi-stage pump is proven in over 1200 installations worldwide.

Vertical turbine and double suction pumps can handle themost demanding condensate or circulating water needs.Sumps can be cleared with Goulds line of vertical orsubmersible sump pumps. Heavy duty slurry pumps likethe SRL and 5500 are specially designed for Flue GasScrubbers and ash handling services.

Oil Refining and Gas ProcessingGoulds offers a full range of API-610 pumps to meet yourdemanding applications: BB2 Between Bearing radially splitpumps, BB3 Multi-Stage axially split pumps, and OverhungOH2/OH3 process pumps.

Vertical turbine pumps are available in any configurationincluding can pumps for low NPSH, fire pumps andsubmersibles. Design and manufacturing capabilitiesinclude standard commercial grades, ASME Section VIII,and API-610 for total line capability.

Primary MetalsThe wide range of products makes Goulds the ideal choicefor the demanding services of this industry. Vertical andsubmersible abrasives handling, slurry pumps for scalepits, chemical pumps for pickle liquor and leachingsolutions,

vertical turbines and double suction pumps for coolingtower and dewatering applications. Also, pumps for wasteacid, scrubber service, and quench.

Water and WastewaterGoulds offers the most comprehensive line of double suction,end suction, multi-stage, non-clog and vertical turbine pumpsfor chemical feed, water supply, booster, low lift, and high lift.

For non-clog solids handling, a range of horizontal, verticalsump and submersible pumps have helped professionalengineers solve pollution problems around the world.

Food And BeverageAdhering to strict process requirements is only one of thereasons for Goulds entry into the forefront of these industries.Goulds pumps handle a wide variety of grain processing,water, wastes, biofuels, corrosives, and erosives.

Ethanol breweries, bottling companies, canneries and amultitude of food and liquid industries rely on Goulds forsuccessful operations.

Goulds makes the widest range of pumps in the industry — pumps to handle virtually any service.This selection chart is designed to help you find and specify the best pump for your service.Pump Selection Chart

PumpCategory

ControlMonitoring

Services

Paper Stock/Process

GouldsModel

Pump TypeCorrosive Abrasive

Solids

Non-Abrasive

Fibrous/Stringy

Referto

Page

Nature of PumpageHigh

Temp-erature

Chem

ical

Pulp

& Pa

per

Min

ing

&M

iner

als

Pow

erGe

nera

tion

Oil R

e!ni

ng &

Gas P

roce

ssin

g

Prim

ary M

etals

Wat

er &

Was

tew

ater

Food

&Be

vera

ge

Process Pumping System

Rotating Equipment ServicesPredictive Monitoring

Paper Stock/ProcessPaper Stock/ProcessHigh Temperature

555

3175PRO Services

ProSmartPumpSmart

3181/31863180/3185

500°F (260°)and Greater

444

Axial FlowAFHeavy-Duty Paper Stock 53500XD

ChemicalProcess

Vertical Sump & ProcessNon-Clog Vertical Sump ProcessFRP Vert. Sump/ProcessANSI Chemical ProcessLow Flow ANSI ProcessANSI High-Temperature Process

5556666667777777888888

Non-Clog ProcessSelf-Priming ProcessANSI In-Line ProcessANSI Metallic Sealless ProcessANSI FRP ProcessANSI Tefzel® Lined SeallessANSI Tefzel® Lined SeallessANSI PFA Te!on® Lined Process

ANSI PFA Te!on® Lined SeallessISO Chemical Process

High-Temperature ISO Process

ISO Vertical Column, Wet PitISO Metallic Magnetic Drive

High-Temperature ISO Magnetic Drive

Close-Coupled ISO Process

Tefzel® Lined Sealless

CV31713171

NM31713196

LF3196

CV31963796

HT3196

39963296 EZMAG

NM31963298

SP32983198

V32983299

ICICBICPICMICV

ICMP

APIProcess

999

Industrial Duty Vertical SumpAPI-610 Process

API 31713700/3710

3910

99

API-610 In-Line

High Temp. Two-StageHigh Temp. Double Suction

3640

Trash Hog

3620

Heavy-Duty Multi-Stage3600 910

93610 Single Stage, Double Suction

Sump/Abrasives/

SolidsHandling

Solids Handling, Self-Priming

Vertical Cantilever

Submersible

VHSVJCHSU

HSULJCUVRS Abrasive Slurry R. L. Cantilever

1010

101010

Axial FlowAF 12

Axial FlowAF

Abrasives Slurry/Solids

Handling

Medium-Duty Abrasive SlurryRubber-Lined Abrasive SlurryRubber-Lined Abrasive Slurry

JCSRL

Rubber-Lined Abrasive SlurrySRL-SSRL-C

Rubber-Lined Abrasive Slurry

Abrasive Slurry R. L. CantileverNon-Clog Solids HandlingSevere Duty Abrasive Slurry

SRL-XT5500HS

VRS

1111111111111111

High-Pressure Multi-Stage3311 12

12

12

Multi-Stage /Axial Flow /

DoubleSuction

Wastewater

Single Stage, Double SuctionMulti-Stage

Di"user-Type Multi-Stage

Two-Stage

Non-Clog, Soft Solids-Handling

NSWNSX

Heavy-Duty Multi-Stage3600

33353935

3400 Series33553316

NSYWSY/SSE/SSF

1213131314141414

1212

VerticalTurbine

Wet Pit Pumps

Vertical SubmersibleVertical Marine

Vertical Industrial TurbineVertical Turbine/Can Type

WCAXYDDWCAWCB

WMCCWMCE

VICVITVIS

VMP

14141414141415151515

Trash Hog 10

High-Pressure Multi-Stage3393 13

11

Solids Handling, Self-Priming

Ideally Suited for Service Indicated* TEFZEL® and TEFLON® are registered trademarks for fluoropolymer resins, films and fibers made by DuPont.

3

PRO Services®

ExtendingEquipment Life...

Product Repair (all types and brands of rotating equipment)

• Service Center Repair

• Turnkey Repair/Installation

• Field Service

• Emergency Service

Reliability Improvement• Predictive Condition Monitoring

• Root Cause Failure Analysis

• Machine & System Assessment

• Engineered Upgrades

O ptimization of Assets• Inventory Management

• Replacement/Exchange

• Training

• Maintenance Management

• Technical Expertise

• Factory Trained

Service Personnel

• Quality

• Fast Turnaround

• Emergency Service –

24 hours/day, 7 days/week

• ISO and Safety Certified

ProSmart™ encompasses the latesttechnology* in condition monitoring totransform your Predictive Maintenanceprogram into a Plant Profitabilityprogram. It provides a cost-effective

solution to maintaining uptime on all of

your rotating equipment. ProSmart

continuously monitors, analyzes and annunciates an alarm

when critical criteria is not met. By identifying, diagnosing, and

sounding an alert to potential equipment problems before they

have a chance to manifest into unexpected downtime or

catastrophic failure, ProSmart helps to assure plant profitability.

ProSmart delivers benefits thatgo right to the bottom line.

• Extends equipment life

• Optimizes costly “walk

arounds” by skilled personnel

• Can help reduce overall equipment failures and the cost

of downtime

• Sends alerts prior to potential catastrophic process failures

• Automatically alerts personnel to machine problems

• Consolidates data for equipment optimization

(*Patent pending)

ProSmart is a wireless machinery monitoring system that

collects and analyzes operating data automatically every 5

seconds. Integrated analysis capabilities provide enhanced

data and reporting functions.

PumpSmart® is the latest advancement in pump control and protectionto reduce energy consumption, increase uptime and decreasemaintenance cost. It allows the pump to be right-sized to the application by

dialing in the speed and torque which increases flow economy, reduces heat

and vibration and improves overall system reliability.

• Simplified Pump Control — PumpSmart was designed specifically to

optimize pumping applications and can be used to control a single

pump or coordinate between multiple pumps with out the need for an

external controller.

• Pump Protection — PumpSmart guarantees to protect the pump from

upset conditions with patented sensorless pump protection algorithms.

• Smart Flow — PumpSmart features a sensorless flow function for

centrifugal pumps that can calculate the flow of the pump with in ±5%

of the pump rated flow.

• Drive for the DCS — While most VFDs can only provide basic

information PumpSmart offers unparalleled insight to the pump

operation which allows for smoother process control and efficiency.

• Pump Experts — PumpSmart is a variable speed drive with pump

specific algorithms imbedded into the drive. With over 150 years of

pump knowledge let the pump experts take responsibility of your

pump system.

PUMPSMART

4

Model 3175

Model 3500XD

Model 3180/3185

Model 3181/3186

Paper Stock/Process

For the toughest services. Thousands of installations handle stock,solids, fibrous/stringy materials, abrasive slurries, and corrosives.Patented dynamic seal option eliminates mechanical seal problems.Features i-ALERT™ condition monitoring as-standard.

lCapacities to 28,000 GPM (6360 m3/h)

lHeads to 350 feet (107 m)

lTemperatures to 450°F (232° C)

lPressures to 285 PSIG (20 bar)

Materials: All Iron/316SS Trim, 316SS, 317SS, CD4MCuN

Paper Stock/Process

All customer requirements were con sider ed in this line of paper stock/process pumps... excellenthydraulic coverage, high efficiency, extreme ease of maintenance, and mechanical reliability.

The Model 3185 pump furnished with ISO or JIS flange drilling, metric fasteners, dimensions.Open, enclosed or ShearpellerTM impellers available. Features i-ALERT™ condition monitoring as-standard.

Model 3180 standard with ANSI flanges.



lTemperatures to 446° F (230° C)


Materials:All Iron/316SS Trim,316SS, 317SS,CD4MCu

High Temperature Paper Stock/Process

End suction, top centerline discharge, self-venting. Centerline mounted forhigh temperature services. High efficiency enclosed impeller. TaperBoreTM sealchamber standard with mechanical seal arrangement.Features i-ALERT™ condition monitoring as-standard.

lCapacities to 13,000 GPM (3,000 m3/h)




Materials: Duplex SS

Medium Consistency SystemsThick stock pulp is pumped with the model 3500XD enhancedperformance medium consistency pumping system.System includes engineered standpipe, control valve, dilutionsystem and level transmitter. A patented air separation deviceremoves air from the pulp to improve mixing effectiveness.Bleaching chemicals and oxygen are mixed in-line with themodel 3501 mixer with Double Shear™ rotor, optimized injectionport, and unique low pressure drop casing design.

lConsistencies from 8% to 16%

lCapacities to 1,500 (pump) and 2,000 adstpd (mixer)


lMaterials from 316SS to Titanium

Model NM3171

Model 3171

Vertical Sump and ProcessThe “Veteran” vertical sump and processpump. Thousands of installa tions —industrial process, sump drainage,corrosive liquids, pollution control,molten sulfur. Rugged, heavycon struction. Simple mounting.

lCapacities to 3,180 GPM(722 m3/h)


lTemperatures to 450° F(232° C)

lPit Depths to 20 feet (6 m)

Materials: Cast Iron, Bronze-fitted, Carbon Steel, 316SS, Alloy 20, Hastelloy B and C,Duplex SS

FRP Vertical Sumpand ProcessDesigned for tough chemicalsump pump applications. TheFiberglass reinforced Vinyl Esterconstruction provides excellentcorrosion resistance inaggressive acidic and causticservices. The true volute designprovides the highest efficienciesin the industry for FRP pumps.

lCapacities to 1,400 GPM (318 m3/hr)



lPressures to 220 psig (15 bar)

Model CV 3171

Vertical Sump and ProcessThe CV 3171 is a recessed impeller,circular volute type sump pump. Ideal for large solids and shearsensitive fluids. Circular volute minimizes radial loads makingthis the ideal pump for low flowprocess applications.


lHeads to320 feet (126 m)

lTemperatures to450° F (232° C)

lPit Depths to 20 feet (6 m)

Materials: Cast Iron,Duplex SS, 316SS, Alloy 20,Hastelloy B and C

5

PROCESS PUMPSPROCESS PUMPS

Materials: Glass reinforced Vinyl Ester.Other resins available upon request

ANSI PROCESS PUMPS

Model 3196 Model HT 3196

ANSI Process

This is the original ANSI pump that has become the standard of the industry. Over 1,000,000installations attest to the remarkable performance of the 3196.

Available with a wide range offeatures for handling difficultapplications. i-FRAME™ power endsmaximize reliability and MTBF (MeanTime Between Failure).





Materials: Ductile Iron, 316SS,CD4MCu, Alloy 20, Monel, Nickel,Hastelloy B and C, Titanium

ANSI High Temperature Process PumpCenterline mounted in a heavy duty fabricated steel casing support, the Model HT 3196minimizes shaft misalignment and piping strain associated with elevated temperaturesup to 700° F. This eighth member of the ANSI pump family features Goulds premieri-FRAME™ power end, multiple seal chamber options including the Taper BoreTM Plus, and a wide variety of rigid and rugged mounting systems.



lTemperature to 700° F (372° C)


Materials: Carbon Steel, 316SS, CD4MCu, Alloy 20, Hastelloy C

Model LF 3196

Low Flow ANSI Process

Designed specifically to provide superior performance for low flow services.Features a concentric (circular volute) casing and open radial vane impellerto eliminate hydraulic and mechanical problems at low flows. i-FRAME™ power ends.

lCapacities to 220 GPM (50 m3/h)




Materials: Ductile Iron,316SS, CD4MCu, Alloy20, Hastelloy B and C

Model 3796

Model 3996

In-Line ANSI Process

For corrosives, abrasives, and hightemperature. Fully open impeller,back pull-out design, heavy dutyconstruction. Field alignment notrequired.





Materials: Ductile Iron, 316SS,Alloy 20, Monel, Nickel, Hastelloy Band C, CD4MCu, Titanium

Self-Priming ANSI Process

One-piece casing eliminates need for separate priming chamber, airseparator, valves, or by-pass line. Fully open impeller can be trimmed to meet specific hydraulic requirements. i-FRAME™ power ends.




lSuction Lifts to 25 feet (7.6 m)

Materials: Ductile Iron, 316SS, CD4MCu, Alloy 20, Hastelloy B and C, Titanium

ANSI PROCESS PUMPS

Model CV 3196

Non-Clog ANSI Process

Perfect solution for handling bulky, fibrous, or shear-sensitive liquids. Recessed impellerdesign provides non-clog pumping withminimum solids degradation. Capability tohandle liquids containing 10 to 20 percentair/gas. i-FRAME™ power ends.

Materials: Ductile Iron,CD4MCu, Alloy 20,Hastelloy B and C





6

SEALED LINED & NON-METALLIC

SEALLESS PROCESS PUMPSSEALLESS PROCESS PUMPS

Self-Priming Lined

When suction pressure is negative and air or gases must beevacuated to accomplish pump priming, the SP 3298 has aself-priming dual volute that primes on demand with only aninitial charge of liquid in the casing. Priming is accomplishedwithin the casing, eliminating the need for auxiliary primingsystems.





lEffective Static Lift to 20 feet (6m)

Lining Material: Tefzel® (ETFE)

Model NM3196

FRP ANSI Process

The Fiberglass reinforced Vinyl Ester construction provides excellentcorrosion resistance in many aggressive acidic and caustic services.The random glass orientation and generous ribbing provides flangeload ratings equal to a metal pump of the same size. The truevolute design provides the highest efficiencies in the industry forFRP ANSI pumps.

lCapacities to 1400 GPM (318 m3/h)lHeads to 4500 feet (152 m)lTemperatures to 200° F (93° C)lPressures to 220 PSIG (15 bar)

Materials: Glass reinforced Vinyl Ester. Other resins available upon request

Vertical ANSI Lined Process

Ideal for moderate to severecorrosives. With or without solids,the 3298 can handle the toughchemical services. As a seallessdesign, its an effective alternativeto pumps with mechanical sealproblems. Meets strictest EPA regulations.



lTemperatures to 250°F (121°C)


Materials: Tefzel®

(ETFE) Construction

Magnetic Drive ANSI Lined

Designed to handle moderate tosevere corrosives with or withoutsolids. Sealless design provideseffective alternative to pumps withmechanical seal problems.Thick linings for extended pump life.

lCapacities to 425 GPM (95 m3/hr)




Magnetic Drive ANSI Process

Robust, simple sealless design idealfor difficult liquids, such as corrosives,pollutants, ultra-pure liquids and toxics.Meets ANSI dimensional specifications.Features a bearing cartridge for ease ofmaintenance and improved reliability.

lCapacities up to 700 GPM (159 m3/h)




Materials: 316SSOthers upon request

Model 3296 EZMAG

Lining Material: PFA

Model V 3298 Model 3299

Model SP 3298

Model 3198

Model 3298

Magnetic Drive ANSI Lined

Designed to handle moderate to severe corrosives with orwithout solids. Sealless design provides effective alternative to pumps with mechanical seal problems. Thick linings forextended pump life.

lCapacities to 1200 GPM (270 m3/hr)


lTemperatures to 250° F (121°C)


Lining Material: Tefzel® (ETFE)

PFA Process ANSI Lined

Virgin PFA TEFLON® for handling a wide range ofsevere corrosive liquids, trace contaminants, andmixtures. The 3198 features ANSI B73.1 design,i-FRAME power ends. TEFLON® molded in placeby high pressure technique and mechanicallylocked.





Material: PFA Teflon®

7

Model ICM

ISOMetallic Magnetic Drive Process

The ICM pump is the optimum metallic sealless pump for process fluid services in thechemical, paper, and general industries where ISO dimensions are preferred. The ICM isspecifically designed to pump difficult fluids such as corrosives, pure, and toxic liquids.Its sealless, sturdy design combines with a wide variety of wet end materials. The bearingsare chemical and abrasion resistant Silicon Carbide (SSiC).Optional Dryguard™ dry-run protection can be provided.


lHeads to 685 feet (210 m) at 3,500 rpm

lTemperature ranges from -40° F to 360° F (-40° C to 180° C)


Materials: Stainless Steel, Hastelloy, Ductile Iron and Alloy 20

Model ICMP

High Temperature ISOMetallic Magnetic Drive Process

The ICMP is a heavy-duty metallic sealless pump for applicationswith high temperature and pressure conditions. It is designed foraggressive, toxic and pure media. The centerline casing is optimalfor the compensation of dimensional changes due to temperaturefluctuations. SSIC silicon carbide plain bearings, optionally withDryguard™ dry run protection. Unique cartridge plain bearingdesign. Inducer option.

lCapacities to 1,760 gpm (400 m3/h)

lHeads to 685 ft (210 m) at 3500 rpm

lTemperature ranges from - 40° F to 535° F (- 40° C to 280° C)


Materials: Stainless Steel, Hastelloy, Cast Ironand Alloy 20

ISO PROCESS PUMPS

Model ICB

Close-coupled ISO Process Pump

The ICB Series is an extension to the IC series ISO 5199 frame mounted chemical pumpseries. These new pumps provide a compact and economical pumping solution ideal forOEM applications and confined spaces in industrial processes. No spacer coupling oralignment is required, reducing capital equipment costs and simplifying installation andmaintenance. ICB pumps are fitted with our patented CycloneSeal Chamber, proven to provide the optimum sealingenvironment for extended mechanical seal life.

lCapacities to 1,980 GPM (450 m3/h)lHeads to 492 feet (150 m)lTemperature ranges from -40° F to 284° F (-40° C to 140° C)lPressures to 230 PSIG (16 bar)

Materials: Ductile Iron, Carbon Steel, 316SS, Duplex SS

ISO PROCESS PUMPS

Model IC

ISO Process

This series is designed in accordancewith ISO 5199 and ISO 2858, making itideal for worldwide chemical or industrialprocess applications. IC pumps are fittedwith a patented seal chamber designcalled the Cyclone seal chamber, whichhas been proven to provide the optimumsealing environment for extendedmechanical seal life. Optional inducerreduces NPSHr.



lTemperature ranges from

-40° F to 350˚ F (-40° C to 177° C)


Materials: Ductile Iron, Carbon Steel,316SS, Duplex SS, Alloy 20, Hastelloy Cand Titanium.

Model ICP

High Temperature ISOProcess Pump

The ICP is a heavy duty chemical process pump designed forextreme temperatures and pressures. The ICP complies withISO standards and features the patented Cyclone SealChamber for extended seal service life. Centerline casingdesign is self venting. Large capacity oil sump providesmaximum bearing cooling. Optional inducer reduces NPSHr.



lTemperature ranges from

-40° F to 535° F (-40° C to 280° C)


Materials: Carbon Steel, 316SS, Alloy 20,Duplex SS and Hastelloy C

8

API 610 PROCESS PUMPS

Model 3700 & 3710 API 610 OH2

Model 3600 API-610 BB3 Model 3910 API-610 OH3

Overhung Process

High temperature and high pressure process pumps designed to fully meet therequirements of API-610. Centerline support for high temperature stability, maximumrigidity. Tangential discharge for maximum hydraulic efficiency.

Available in top suction design (Model 3710).


lHeads to 1,200 feet (360 m)


lPressures from full vacuum to 870 PSIG (60 bar)

Materials: All API materials, custom materials available

Models 3620 & 3640 API 610 BB2

Single and Two-Stage Between Bearings

Between bearings, radially split process pumps designed for smooth, reliable operation.Fully meets requirements of API-610.




lPressures to 1,000 PSIG (69 bar)

Materials: All API materials, custommaterials available

Vertical In-Line with Bearing Frame

High pressure, high temperature servicesmeets API-610 requirements. Back pull-out for ease of maintenance. Bearingframe carries pump loads.





Materials: All API materials,custom materials available

API 610 PROCESS PUMPS

Model API 3171 (VS4)

API 610 Vertical Sumpand Process

For all refinery services requiringtank mount or sump duties. Fullycompliant with 9th and 10theditions ISO 13709 / API610


lHeads to 525 feet(160 m)

lTemperatures to450°F (232°C)

lPit depths to 20 feet(6m)

Materials: Carbon Steel,12% Chrome Fitted,316SS, Duplex SS

Heavy Duty Multi-Stage

Advanced design with proven operating history.Axially split, with many enhanced features that make it anextremely reliable, high performance pump well-suited toa wide range of services.






9

Model 3610 API-610 BB1

Horizontal Split Case, Double Suction

Designed for a wide range of industrial, municipal, and marine services.



lWorking pressures to 300 PSIG (21 bar)


Materials: All API Materials, Custom Materials Available

SUMP/ABRASIVES/SOLIDS

Vertical Cantilever

Ideal for range of tough sump services... abrasiveslurries — mine slurry, fly ash, foundry sand, clay,coal prep, power plants, or large solids handling.

Models VJC lCapacities to 7,500 GPM (1,703 m3/h)


lSolids to 2.25 inches (57 mm)

Materials: Cast Iron, High Chrome Iron, 316SS

Model VHS lCapacities to 7,000 GPM

(1,590 m3/h)


lSolids to 10 inches (254 mm)

Materials: Cast Iron, High Chrome Iron, 316SS

VJC

VHS

Model HSU, HSUL & JCU

Model VHS & VJC

Submersible

Three different models allow selection of the very best pumpfor the service conditions whether large, stringy, fibrous solids,or abrasive slurries.




lSolids to 6 inches (152 mm) HSU JCU HSUL

Solids Handling Self-Priming

Goulds Trash Hog is designed for superior solids handlingcapability, optimum pump performance, and extreme easeof maintenance for a wide range of industrial, pulp andpaper, mining, and wastewater services. Whether handlingsludge, debris or plant wastes, theres no other pump thatcompares to the Trash Hog.





lSuction Lifts to 25 feet (7.6 m)

lSpherical solids to 3 inches (76 mm)

Materials: Cast Iron, Stainless Steel, CD4MCu, High ChromeIron Fitted

Trash Hog®

SUMP/ABRASIVES/SOLIDS

Materials: Cast Iron, High Chrome Iron,CD4MCu, 316SS

10

ABRASIVES/SOLIDS HANDLING

Medium Duty Slurry

Ideal for most medium duty abrasive and/or corrosive slurryservices. Extra thick wet end components extend wear life.Replaceable wear liner for low maintenance cost. Available withdynamic seal for elimination of seal problems, reducedmaintenance. Variety of drive arrangements availablefor application flexibility.






Materials: Cast Iron, High Chrome Iron, 316SS, CD4MCu,Endura Chrome

Models SRL/SRL-C/SRL-S/SRL-XT

Model JC

Model 5500 Model VRS

Model HS

Abrasive Slurry Handling

The SRL pumps are designed to handle the toughestabrasive slurry. Features include wear-resistant rubber linersfor maximum life and engineered for ease of maintenance.The SRL-S uses a “Shearpeller” for froth applications.





Lining Materials: Natural Rubber, Neoprene, Nitrile,Polyurethane, Chlorobutyl, Hypalon, EPDM, CeramicComposites and Metal Alloys

Severe Duty Slurry

The “Workhorse” of severe duty slurry pumps. Its not onlybuilt to stand up to the toughest services, but the Model 5500is also designed for extreme ease of maintenance. A heavyduty power end, extra thick wall sections, and easilyreplaceable wear parts add up to long, reliable operation.





lSolids to 4 inches (102mm)

Materials: High Chrome Iron, CD4MCu, Endura Chrome

Hydro-Solids

For handling sludges and slurries containing large solids, entrainedair, fibrous materials, corrosives and abrasives. Features recessed,non-clog impeller.






Materials: Cast Iron, High Chrome, Iron, 316SS, CD4MCu

ABRASIVES/SOLIDS HANDLING

11

Abrasive Slurry Handling

The VRS is designed using theproven reliability of the SRL andGoulds cantilever pumps. VRS offershigher efficiencies, with maximumreliability and interchangeability.Offered in standard lengths and avariety of elastomers.


lHeads to 120 Feet (37m)


lPressures to 75 PSIG(5 bar)

Lining Materials:Natural Rubber,Neoprene, Nitrile,Polyurethane,Chlorobutyl, Hypalon,EPDM, and Metal / Alloyimpeller available.

High Pressure Multi-Stage

Radially split, segmented multi-stage pump; a proven state-of-the-art design for the most demanding high pressureservices. Many special features for application flexibility.Ideal for cogeneration, boiler feed, reverse osmosis, booster,water and oil.


lHeads to 5,400 feet (1,646 m)



Materials: 12% Chrome/Cast Iron and 12% Chrome/316ss

Heavy Duty Multi-Stage

Advanced design with proven operating history.Axially split, with many enhanced features that make it anextremely reliable, high performance pump well-suited toa wide range of services.






Model 3600 API 610 BB3 Model 3311

Centrifugal Diffuser Multi-Stage

Centrifugal diffuser type multi-stage pumps well suited for boiler feed,reverse osmosis, petrochemical and hydrocarbon services.





Material:Carbon Steel

Model 3393

High Pressure Multistage Ring Section Pump

Radially split, segmented casing, multistage pump designed with modular interstagecomponents. Its multiple suction nozzle and discharge nozzle orientations allow adaptationto multiple piping installations. Multiple hydraulics for each pump size optimize efficiencyacross a vast range of applications. These pumps are particularly well suited for reverseosmosis and boiler feed applications. Shower services, booster service and other highpressure services are applications where it may be applied.





Materials: Carbon Steel, Carbon Steel/12% Chrome Fitted,12% Chrome, Duplex and Super Duplex

Multi-Stage

Multi-stage ring section pumpdesigned for high pressure servicesincluding: boiler feed, reverseosmosis, shower service, andmuch more.

lCapacities to 1,500 USGPM(340 m3/h)


lMax. speed to 3,600 rpm(3,600 min-1)

lDischarge from 11/2" to 5"



Materials: Cast Iron, Stainless Steel, Stainless Fitted

Model 3355

Model 3935

MULTI-STAGE/AXIAL FLOW/DOUBLEMULTI-STAGE/AXIAL FLOW/DOUBLE

12

3400 Series

13

Model Axial Flow ®

Axial Flow

For continuous circulation of corrosive/abrasive solutions,slurries, and process wastes. Fabricated elbow or castelbow designs available. Most suitable for low head, highcapacity pumping.

lCapacities to 350,000 GPM 79,545 m3/h)





Materials: Cast Iron, 304SS, 316SS, CD4MCu,Nickel, Monel, Alloy 20, UHB-904L, Titanium,Hastelloy, Sanicro 28

Two-Stage Splitcase

Horizontal splitcase pumps are ideally suited for boilerfeed, mine dewatering, and other services requiringmoderately high heads with a wide range of operatingconditions.

lCapacities up to 3,000 GPM (681 m3/h)




Materials: Bronze-fitted, Cast Iron, Bronze, 316SS

Model 3316

Horizontal Split Case, Double Suction

Designed for a wide range of industrial, municipal, and marine services.



lSuction sizes to 78" and discharge sizes to 66”

lWorking pressures to 400 PSIG (27.6 bar)


Materials: Cast Iron/Bronze, All Iron, All Bronze, Cast Iron/Stainless Steel, All Stainless Steel

SMALL CAPACITYModel 3410

(to 8,000 GPM/1,818 m3/h)

MEDIUM CAPACITYModel 3409

(to 12,000 GPM/2,727 m3/h)

LARGE CAPACITYModel 3420

(to 65,000 GPM/14,772 m3/h)

EXTRALARGE CAPACITYModel 3498

(to 225,000 GPM/51,135 m3/h)

WASTEWATER/VERTICALWASTEWATER/VERTICAL

Model WCAX, YDD, WCA, WCB, WMCC & WMCE

Wet Pit Column Pumps

Wet Pit Column Pumps are custom designed formaximum reliability and high efficiency.



Materials:Bronze Fitted, All Bronze, SS Fitted, Ni Resist, All SS

Model NSW

Small CapacitySewage Pump

Single stage – enclosed non – clogtype impeller for pumping wastewaterand other non-corrosive liquids withsoft solids.



lSolids to 6.38inches (162 mm)

Materials:Cast Iron, 2-3% Nickel Cast Iron, Ductile Iron

Model NSX

Small CapacitySewage Pump

Single stage – open Shearpeller impellerspecially designed for pumpingwastewater, with fibrous or stringy solids.




Materials:Cast Iron / 431SS Fitted

*Also available in verticalconfigurations (NSXV)

*Also available in verticalconfigurations (NSYV)

*Also available in verticalconfigurations (NSWV)

*Also available in verticalconfigurations (SSEV, SSFV, WSYV)

Model NSY

Medium CapacitySewage Pump

Single stage – enclosed mixed flow type impeller for pumping wastewaterand other non-corrosive liquids with soft solids.

lCapacities to 23,000 GPM

(5,223 m3/h)




Models SSE, SSF & WSY

Large Capacity Sewage Pumps

The pumps are designed with large, unobstructedpassages through the impeller and volute which makethem ideally suited for pumping sewage, waste water,and storm water.




14

Model VMP

Vertical Marine

Goulds Model VMP pump is anautomatically self-priming unitdesigned specially for efficientunloading and stripping of producttankers and barges.

lCapacities to 20,000 GPM(4,542 m3/h)



VERTICAL TURBINESVERTICAL TURBINES

Model VIS

Vertical Submersible

For deep settings or where use of lineshaftpumps is impractical. For irrigation, service water,deep well supply, offshore and mine dewatering.



Materials:Any Machinable Alloy

Model VIT

Vertical Industrial Turbine

A wide range of hydraulic conditionsallows meeting requirements of virtuallyevery pumping service. Designed to meetcustom specifications of the user.Model VIT can-type turbine meetsAPI-610 specifications.

Model VITlCapacities to 65,000 GPM

(14,762 m3/h)



Materials: Any Machinable Alloy

Model VIC

Vertical Can-Type

A wide range of hydraulic conditions allowsmeeting requirements of virtually everypumping service. Designed to meet customspecifications of the user. Model VIC can-type turbine meets API-610 specifications.

Model VIClCapacities to 65,000 GPM

(18,168 m3/h)



Materials: Any Machinable Alloy

15

Form BRPSG 5/10

Whether its for severe corrosives,abrasive slurries, fibrous/stringy solids,

high temperature liquids, hazardousfluids, low flow or high capacity

services – Goulds has a perfect,reliable solution. The Goulds selection

of fluid solutions includes horizontal and vertical configurations in a range

of alloy and non-metallic constructions,sealed and sealless. Goulds wide

range of products ensures that we have the right pump for virtually

every application.

2A LIQUID PROPERTIES

Liquid: __________________

Vapor Pressure: __________

Specific Heat: ____________

Viscosity:________________

Solids Size/Content: _______

Specific Gravity: __________

Temperature:_____________

Characteristics: (flammable,explosive, carcinogenic, toxic,noxious, regulated, etc.):__________________________

The following Pump Selection Checklist is designed to assist users in reviewing most pump requirements for ultimate selectionof the best pump. Your Goulds representative has been specially trained in pump application and should be contacted to assistin final pump selection for optimum reliability and safety.

Pump Selection Checklist

1B

Pump Size _____________

Impeller diameter ________

HP, efficiency ___________

NPSHR ________________

Minimum Pump Flow _____

Speed (RPM) ___________

2B

Materials ofConstruction ____________

Bearing cooling__________

Sealing/flushingrequirements____________

Jacketing forcooling/heating __________

3B

Explosion-proof enclosures______________________

Safety protection options______________________

Coupling guard options______________________

Casing drain ____________Flange options __________O-ring materials _________

4B

Type of lubrication _______

Start-up assistance_______

Operator training_________

Maintenance training _____

Baseplate options________

Oil seal options__________

1A SYSTEM

Service:________________

Capacity:_______________

Total Dynamic Head: _____

NPSH Available: _________

Suction Pressure: ________

Minimum Flow Rate:______

Total Working Pressure: ___

3A SAFETY/ENVIRONMENTAL

l UL label (explosion-proof enclosures)

l Regulations (government, local, plant)

l Temperature limits

l Fugitive emission limits

l Product purity

l Best Available Control Technology

l Reporting requirements

4A ECONOMY/RELIABILITY

l MTBF requirements

l Lubrication

l Cooling/Heating

l Operator experience

l Operator maintenance

l Extra product filtering

l Ease of installation

Pick Your Perfect Process PumpI.

REQ

UIRE

MEN

TSII.

PUM

P

© 2008 Goulds Pumps, IncorporatedA subsidiary of ITT Corporation

Visit our Web site at www.gouldspumps.com

goulds rev psg

Documents