government polytechnic, khamgaon · 2020. 8. 8. · trainer kit for mosfet trainer kit suitable to...

of 6

No. : GPK/EQP/inst purchase/ETX_List-A/2018-19/3256 Date: 01/12/2018

By post / email

To,

……………………….

……………………….

………………………..

………………………..

QUOTATION

Sub: Quotation for purchase of equipment / furniture.

(Due Date 02/01/2019 & Date of Opening: 03/01/2019) Dear Sir,

Sealed Quotations are invited from eligible and interested manufacturers/ dealers/distributors/

for the following items on the terms and conditions mentioned below.

Sr. No.

Name of the item with specification

Quantity required

Approximate cost per unit

(Inclusive of GST and all)

(Rs.)

Name of the item

Specification

1 Trainer kit for MOSFET

Trainer kit suitable to plot I/p, O/P characteristic of MOSFET with inbuilt DC supply and required digital meters (4 No.) and various Test point

2 4000

2 Trainer kit for single tuned amplifier

Trainer kit suitable to plot the frequency response of a Transistorized L-C tuned (single) circuit amplifier. Centre frequency above 400 KHz. (any other suitable frequency) Inbuilt DC supply and various Test points.

2 4000

3 Trainer Kit suitable to plot Anode

Trainer kit suitable to plot anode - cathode characteristics and gate characteristics of silicon controlled Rectifier (SCR). 0 - 10V and 0 - 150V DC power supply of required current rating & 4 no of digital voltmeter & current meter are inbuilt in the kit.

1 4000

4 Study of SCR Turn ON Methods

Trainer kit suitable to study the basic triggering methods of SCR like Resistance triggering circuit; R-C triggering circuit. Should be provided with SCR, Lamp load (15W) & isolation transformer. Trainer kit should demonstrate effect of variation of resistor and capacitor in R & RC triggering circuit on firing angle of SCR. SCR should be operated on 230V, 50Hz AC supply

1 4000

GOVERNMENT POLYTECHNIC, KHAMGAON

WINNER OF ISTE-NARSEE-MONJEE AWARD-2000

(07263) 56644 (O), 54609 (R), Fax - (07263) 52278

E-mail: [email protected] Gram: - POLYTECH

mailto:[email protected]

of 6

5 Study of SCR Turn ON Methods

Trainer kit suitable to study the SCR triggering using Synchronized UJT triggering. Trainer kit should demonstrate effect of variation R on firing angle in Synchronized UJT triggering circuit.

1 4000

6

Trainer kit for single stage and Multistage BJT amplifier

Trainer kit suitable to plot Frequency response of 2 stage common emitter transistor amplifier circuit. Facility to measure A1& A1xA2. Inbuilt DC supply and various Test points.

2 3000

7 Trainer Kit for FM Modulator using IC 566

AC Source:600Hz-2.5KHz, FM Modulator: VCO, Test Points, Circuit diagram engraved on front panel with transparent rear panel

2 4000

8

Trainer Kit for FM Demodulator using IC 564/565

AC Source:600Hz-2.5KHz, FM Demodulator: VCO, Test Points, Circuit diagram engraved on front panel with transparent rear panel

2 4000

9 Antenna trainer kit

Waveforms: Sine RF Generator: 750 MHz approximately (output adjustable) Tone Generator : 1 KHz approximately (output adjustable).Directional Coupler: Forward & Reverse (selectable).Matching Stub : Slider type. Antenna Rotation: 0-360 deg. Resolution 1 deg. Antenna Rotation: 0-360 deg. Resolution 1 deg. Receiving Antenna: Folded dipole with reflector. Detector Display: Level adjustable meter Interconnections: 2 mm Banana sockets Antenna with Radiation Pattern Plotting Software and 10 Antennas RF Generator for easy experimentation with built-in modulation and DC transmitting mast, and receiving mast with detector. Experiment with different types of antennas. Antenna Fabrication kit Forward / Reverse power & SWR measurements

2 6000

10

Trainer kit for Sampling theorem and PCM modulation and demodulation

STUDY OF SAMPLING THEOREM. Trainer kit suitable to demonstrate the principle of Sampling theorem which is basic of digital communication system by IC based circuit. Kit should have built in Clock generator, Pulse generator Sample & Hold circuit, Microphone Preamplifier & Filter circuit. Also provided with signal recovery section. Effect of aliasing should be demonstrated. Inbuilt DC supply and various Test points. ii) PULSE CODE MODULATION. Trainer kit suitable to demonstrates the principle of pulse code modulation. Kit should consist of Crystal based clock generator, Divider circuit, A to D converter and parallel to serial converter. Trainer should give the pulse code modulated signal at output. Inbuilt DC supply and various Test points. iii) PULSE CODE DEMODULATION. Trainer kit suitable to demonstrate the principle of pulse code demodulation using IC based circuit. Kit consists of serial to parallel converter, D to A converter, filter and amplifier. This unit should be matched with PCM trainer & original modulating

2 5000

of 6

11

Trainer kit for DPCM modulation and demodulation

Onboard DPCM Transmitter and receiver. Onboard Audio input & output processing. Circuits Clock and entire control Signal section. Detailed signal processing circuit with complete data and control signal flow Signal generator block. Functions: Sine and Square O/P frequency range: 300Hz to 3.4 KHz Audio blocks: Audio I/P and O/P processing circuits Control signals: R/W for ADC, reset. Latch enables, OEs. Sampling frequency : 8 KHz Total Bits per sample :5 bits including sign bit Compared to 8 bit PCM :3 bits per sample

2 7500

12

Trainer kit for delta and adaptive delta modulation

Input Channel: Time Division Multiplexed .Serial Crystal Frequency: 6.400 MHz Sampling Clock Frequency: 50, 100, 200 & 400 KHz (Switch selectable).On board Generator: Synchronized and Adjustable Integrator: Four integrator gain settings .Normal, X 2, X 4, X 8Low Pass Filter: Fourth order Butterworth (Cut Off Frequency 4.8 KHz).

2 7500

13

Trainer kit for Study of Data Formats. Line code trainer for UPNRZ, PRZ, BPRZ, PNRZ, and UNRZ. Manchester and Differential

Technical Specification .Data Formatting and Carrier Modulation Transmitter .Crystal Frequency: 4.096 MHz Data formats: NRZ (L), NRZ (M), RZ, AMI, and RB. Biphase (Manchester), Biphase (Mark).On-board carrier : Sine waves synchronized to transmitted data at 1.6 MHz, 960 KHz, (0 deg. phase) 960 KHz, (90 deg. phase) Power Supply : 220/110V, 50/60 Hz.

2 5000

14

Trainer kit for ASK , PSK , FSK modulation and Demodulation

Trainer kit for Study of keying techniques .For Study of Amplitude Shift Keying Study of Frequency Shift Keying for Study of Phase Shift Keying for Study of Differential Phase Shift Keying for Study of Quadrature Phase Shift Keying Study of Differential Quadrature Phase Shift Keying Technical Specifications Carrier Demodulation and Data Reformatting Receiver IC carrier Demodulation : ASK - Rectifier

2 7500

15

Trainer kit for QPSK modulation and Demodulation

Trainer kit shall demonstrate principle of QPSK modulation and demodulation

2 4000

16

Trainer kit for QAM modulation and Demodulation

Trainer kit shall demonstrate principle of QAM modulation and demodulation

2 5000

of 6

17

Trainer kit for DPSK modulation and demodulation

Trainer kit shall demonstrate principle of DPSK modulation and demodulation

2 5000

18

Trainer kit for FDM and TDM and de-multiplexing

Trainer kit shall demonstrate principle of FDM and TDM multiplexing and DE multiplexing

2 10000

19

CDMA – DSSS signal generator and demodulator

Trainer kit shall demonstrate principle of CFMA DSSS signal generation and demodulation

2 10000

20 FHSS signal modulator and demodulator

On-board data generators and PRN sequence generators. BCD rotary switches for Data Selection Tap selectable PN sequence generators Multiple data rate and chip rate selection Variable processing gain selection Slow and Fast frequency hopping demonstration PN sequence driven Frequency synthesizer with non-overlapping frequency channel assignment Data Rates :16 Kbps, 8 Kbps and 4 Kbps Word Length :8 bits Data Format :NRZ (Not Return to Zero) Chip Rates :240 KHz, 120 KHz, 60 KHz, (DSSS CDMA)16 KHz, 8 KHz and 4 KHz (for FHSS) Sequence Type :Maximum Length Sequence Sequence Pattern :Selectable through feedback taps in LFSR array. BFSK Frequencies: 100 KHz for mark and 50 KHz for space. Frequency Synthesizer Output: Sinusoidal Frequency Synthesizer: 1.6 MHz, 1.2 MHz, 800 KHz and 400 KHz. Channels Hoping Channels :Four Number of Hopes :Variable depending upon data rate and chip rate per Data Periods

2 10000

21 Trainer kit for UJT

Trainer kit suitable to plot V I characteristic of UJT with inbuilt DC supply and required digital meters (2 No.) and various Test point

2 4000

22 Trainer kit for RC Phase shift oscillator

Trainer kit suitable to produce oscillations of frequency 10 KHz (any other suitable frequency) Inbuilt DC supply and various Test points.

2 5000

23 Trainer kit for crystal oscillator

Trainer kit suitable to produce oscillations of frequency 10 KHz (any other suitable frequency) Inbuilt DC supply and various Test points.

2 5000

24

Trainer kit for negative feedback amplifier

Trainer kit suitable to plot the frequency response with and without Voltage series feedback, Voltage shunt, Current series and current shunt feedback. Inbuilt DC supply and various Test points.

2 5000

(Note: Please note the terms and conditions mentioned below)

of 6

TERMS AND CONDITIONS

The bid/quotation should be submitted in two bid format.( Technical bid & Commercial Bid)

The first envelope will contain Technical specifications of the product, technical literature

/ leaflet and other documents mentioned below. It is mandatory to the suppliers to submit

following documents without which your quotation will not be considered.

1. Covering Letter for tender on the company letter head mentioning official address, Contact

No, E-Mail address and website (if available) address.

2. Registration letter of supplier’s establishment (company / organization)

3. EMD in this regard (3% of the quoted cost or Re. 5000 whichever is minimum) to be paid

in the form of DD in favour of Principal, Govt. Polytechnic, Khamgaon OR Exemption

certificate from competent authorities, if exemption is claimed.

4. GST registration certificate / Number.

5. GST Clearance Certificate / GST Challan for last quarter of the financial year. (Paid up to

July 2018)

6. Authorization / Distributorship certificate from manufacturer. Proof of permission to

manufacture

7. The equipment / item mentioned in the quotation from competent authorities. (to be

submitted if the bidder is not a manufacturer)

8. Technical literature / leaflet of the make and model no of equipment quoted.

9. Undertaking by supplier confirming quality of Equipment / Machinery.

10. Under taking by supplier towards supply of equipment within prescribed date / period and

post sales services.

(Additional document may also be asked by undersigned for confirming the details.)

of 6

The second envelope will contain the financial bid in which the all inclusive rates F.O.R.

Destination will be written and signed with the stamp of the establishment in the following

format.

Sr.

No.


Quantity

required

All

inclusive

cost per

unit

(Rs.)

All

inclusive

cost for

quantity

mentioned.

(Rs.)

Name of the

item Specifications

Date - (Signature)

Place - Rubber Stamp of Organization

Important Instructions

The two envelopes should be sealed with a mention of the type of envelope (technical /

Financial), Reference no., Date of opening the quotation on the front side of the envelope.

These two envelopes should be sealed in a third envelope by giving heading “Quotation for

supply of “Electronics and Communication Engg. Department Equipment” and writing

complete address of the undersigned. (Address: Principal, Government Polytechnic,

Khamgaon, Jalamb Road, Khamgaon, Dist: Buldana, (M.S.), Pin 444 303.

The quotations should reach the undersigned on or before date 02/01/2019

The material will be checked at this institute.

No extra charges will be paid for cartage, packing etc. for the material rejected and replaced.

Quotations will be opened at 3.00 AM/ PM on date 03/01/2019 at office of the Principal of

Institute.

Rates should be valid for 6 months from the date of confirmation letter.

Materials should be quoted for standard makes and minimum pkgs.

Delivery to the consignee has to be effected within 1 week from the date of issue of purchase

order or on or before the prescribed date. (if any)

The undersigned reserves the right to accept or reject any offer or all offers without assigning

any reason thereof.

The said process is subjected to the necessary approval from higher authorities.

Principal Govt. Polytechnic, Khamgaon.

Copy to:

1) Hon. Director, Directorate of Technical Education M. S. Mumbai for information please. It is requested to

do needful for uploading the same on website as per instructions issued.

2) Hon. Joint Directorate of Technical Education Amravati Region, Amravati for information pleases. It is

requested to do needful for uploading the same on website as per instructions issued.

3) Head of Electronics and communication Department for information & n a

4) Suppliers as list attached herewith

5) Shri. Ambatakar, Programmer, GP Khamgaon, for uploading on Institute website.

6) Institute Notice Board

of 4

Page 1 of 4

No. : GPK/EQP/inst purchase/APM_List-A/2018-19/3255 Date: 01/12/2018

By post / email

To,

……………………….

……………………….

………………………..

………………………..

QUOTATION





Sr. No.


Quantity required

Approximate cost per unit

(Inclusive of GST and all)

(Rs.)

Name of the item Specification

1 Oven

Laboratory Electric Oven, Digital Indicator Cum Controller with Safety Alarm, Range 50 deg C to 300deg. C. +/- 1 deg. C. with Air Circulating Fan , S.S. Inside, Size 600 X 600 X 600mm

1 50000

2 Infra-Red Moisture Meter

Standard: IS: 2720 (Part 2) This moisture meter has been designed for rapid and accurate determination of the moisture content of a wide variety of materials.

1 40000

3 Mould for modified Procter Test

Proctor mould having a capacity of 944 cc with an internal diameter of 10.2 cm and a height of 11.6 cm. The mould shall have a detachable collar assembly and a detachable base plate.

5 5000

4 Water Bath Tub for testing Soundness of cement

Bath volume 20L and temperature range from ambient 5C above ambient to 100C PID microprocessor controller touch pad type achieves accurate control. Memory to store three temperature setting and single button to activate required set temperature. Temperature unit display readout.

1 10000




(07263) 56644 (O), 54609 (R), Fax - (07263) 52278

E-mail: [email protected] Gram:- POLYTECH


of 4

Page 2 of 4










in the form of DD in favor of Principal, Govt. Polytechnic, Khamgaon OR Exemption




July 2018)


manufacture








of 4

Page 3 of 4



format.

Sr.

No.


Quantity

required

All

inclusive

cost per

unit

(Rs.)

All

inclusive

cost for

quantity

mentioned.

(Rs.)

Name of the

item Specifications

Date - (Signature)


of 4

Page 4 of 4





supply of “Applied Mechanics Department Equipment” and writing complete address of the

undersigned. (Address: Principal, Government Polytechnic, Khamgaon, Jalamb Road,

Khamgaon, Dist: Buldana, (M.S.), Pin 444 303.





Institute.






any reason thereof.



Copy to:





3) Head of Civil Departments for information and n a



6) Institute Notice Board.

of 4

Page 1 of 4

No.: GPK/EQP/inst purchase/EED/2018-19/3295 Date: 05/12/2018

By post / email

To,

……………………….

……………………….

………………………..

………………………..

QUOTATION


(Due Date 02/01/2019 & Date of Opening : 03/01/2019) Dear Sir,



Sr.

No.


Quantity

required

Approximate

cost per unit

(Inclusive of

GST) (Rs.)


1 Wattmeter-3 Phase

Current-2.5 to 5 Amp.Voltage 50-100-

200-400 Voltage Circuit Resistance -150

ohm

Power 500-1500 watt. Continuous rating

2 8000

2 Current Transformer Operating voltage 230v AC,50Hz, Input

Power 3watt,Current Rating 5/1Amp. 3 2000

3 Potential Transformer 230 v,50Hz,8W type syn 144m,Burdon

10VA 4 2000

4 Megger Hand driver generator type, (crank to

turn) Metal Body 500 v,0-100 mega ohm 1 4000

5 Tong tester

Model having range 0-10-30-100-300-

1000A and 300/600volt having accuracy

+5%fsd complete with leather case,test

leads .

2 2000

6 LCR Meter Inductance -1micro henry to

10H,capacitance 05pf to 2 4000



(07263) 56644 (O), 54609 (R), Fax - (07263) 52278



of 4

Page 2 of 4

1000microfarad,Resistance-01 ohm to

10megaohm along with suitable signal

generator & detector.

7 Fuse protection kit Current range 5/10 amp,voltage 230 v ,

50Hz, single phase. 1 4000

8 Pure inductor-varaable Current range 0to 5amp.,50Hz,01 mh

to10mh. Iron core,single phase . 2 5000

9

Electric power drill

Machine-with

hammering

Power 380W, Speed0-2600 rpm 1 4000















July 2018)


manufacture








of 4

Page 3 of 4



format.

Sr.

No.


Quantity

required

All

inclusive

cost per

unit

(Rs.)

All

inclusive

cost for

quantity

mentioned.

(Rs.)

Name of the

item Specifications

Date - (Signature)


of 4

Page 4 of 4





supply of “Electrical Engg. Department Equipment” and writing complete address of the







Institute.






any reason thereof.



Copy to:





3) Head of Electrical Engineering Departments for information and n a. Please verify specifications and

approximate cost



6) Institute Notice Board

of 6

No.: GPK/EQP/inst purchase/MED/2018-19/3296 Date: 05/12/2018

By post / email

To,

……………………….

……………………….

………………………..

………………………..

QUOTATION


(Due Date 02/01/2019 & Date of Opening : 03/01/2019) Dear Sir,

Sealed Quotations are invited from eligible and interested manufacturers/ dealers/distributors/ for the following items on the terms and conditions mentioned below.

Sr. No.

Name of the item with specification Quantity required

Approximate cost per unit (Inclusive of GST) (Rs.)


1 Mcleod Gauge

Mcleod Gauge Test Ring ,

Range 0 to 50 microns

accuracy - + 0.05%, Liquid

charge – Approximately 100

to 120 CC including 6 CC of

mercury

1 46000

2 Bernolli’s Theorem Application

Manometer Range 0-400 MN,

No of Manometric Tube 07,

Test Length : 200 MN circular,

acrylic Bar Upstream Size : 35

MN Dia Throat Diameter 22

MN DIA.

1 24000

3 Cut Section Model of Hermetically Sealed Compressor

Cut Section Model of

Hermetically sealed

Compressor cut section model

of standard size used in

technical education systems

1 6000

4 Cut Section Model of Split Air-Conditioner

Cut section model of split air

conditioner Cut section model

of standard size used in

technical education systems.

1 8000

5 Stroboscope

Stroboscope Display 5 digits,

circuit exclusive one chip

design microprocessor, unit of

1 18000



(07263) 56644 (O), 54609 (R), Fax - (07263) 52278



of 6

measurement FPM, Operating

temperature 0 to 500 C,

Operating Humidity – Less

than 80 % RH Power Supply

AC (100 to 240V) & DC (9V)

with adapter of 3A Battery –

DC 1.2 V NI-MH Built Up

with chargeable unit , Flash

Tube – Replaceable of xenon

lamp Stroboscope flash rate

100 to 15000 flashes per

minute. Flash duration 60 To

1000 Microseconds accuracy -

+ 0.05% resolution 0.1

FRM/RPM

6 Temperature Trainer Kit

Temperature Trainer Kit

trainer kit consisting of

bimetallic strip, thermometer,

thermistor & Thermocouple

1 20000

7 Pyrometer

Pyrometer, Temperature range

: -40 to 9000C, Temperature

reolution – 0,10C spectral

range – 8 to 14 uM, optical

revolution- 0.10C, Spectral

Range 8 to 14 uM, Optical

resolution – 22:1, System

Accuracy - +10C, Response

time – 150 MS, Power Supply

8 to 30 V DC with maximum

current 100 MA relative

humidity : 10- 95% Non-

condensing..

1 10000

8 Strain gauge trainer (strain/force measurement)

Net dimensions (assembled):

720 mm high x 760 mm wide x

520 mm front to back

Net weight (including Strain

Display and Weight Sets): 27.5

kg

Packed weight: 41.5 kg

Packed volume: 0.16 m3

Sets of masses: The large mass

set gives weights from 0.5 kg

to 10 kg in a range of units.

The small mass set gives

weights from 10 g to 500 g in

10 g units.

Dummy resistors: Set of three

plugs fi tted with high

accuracy resistors that match

the strain gauges

Electrical supply: 100 VAC

to 240 VAC, 50 Hz to 60 Hz

2 10000

of 6

with earth

Strain display: Multiline

display that shows:

• Bridge output voltage (micro-

volt)

• Strain reading in micro-strain

(me)

• Active arms (gauges)

• Gauge factor

Strain systems:

• Bending system: Four

standard gauges fi tted to a

given datum on a steel beam, fi

xed as a cantilever. Nominal

beam cross-section is 5 mm x

20 mm.

• Torsion system: Two sets of

identical 45-degree shear/

torque strain gauge rosettes fi

tted to a torsion bar. Nominal

bar diameter is 10 mm.

• Tension system: Two sets of

identical 90-degree ‘Tee’ strain

gauge rosettes fi tted to a

tensile test specimen. Steel

specimen supplied as standard.

Nominal tension specimen

cross-section is 2 mm x 10

mm.

9 Rotameter trainer for flow measurement

2 10000

10 Temperature measurement and control using thermocouple kit

Model UITM-151 [U-tube

Manometer Sensor]

UITM-152

[Differential Pressure Sensor]

Orifice:

Orifice plate embedded

between two metal

tubings.

UITM-151-U tube

manometer with

Mercury filled.

UITM-152-Differential

type piezo resistive

pressure sensor.

Flow Rate: 60 to 600 LPM

Rotameter : 60 to 1700 LPM

Acrylic body. Rotameter for

known flow measurement.

Pump: FHP Manoblock.

Water Tank : SS tank of

capacity 25 liters for water

storage and circulation for

UITM-152

Display : 3½ digit to

2 12500

of 6

read ±1999 counts.

Power Supply: 230V ± 10%

@50 Hz

Inductance : Copper wire

wound on a babin with MS

core moving inside.

Displacement: 20mm

Power Supply: Necessary

cable provide

Accessories: Aluminium

Housing with core moving on

a graduated scale

11 Flow measurement using optical transducer

2 12500


of 6














July 2018)


manufacture










format.

Sr.

No.


Quantity

required

All

inclusive

cost per

unit

(Rs.)

All

inclusive

cost for

quantity

mentioned.

(Rs.)

Name of the

item Specifications

Date - (Signature)


of 6



Financial), Reference no., Date of opening the quotation on the front side of the

envelope. These two envelopes should be sealed in a third envelope by giving heading

“Quotation for supply of “Mechanical Engg. Department Equipment” and writing

complete address of the undersigned. (Address: Principal, Government Polytechnic,

Khamgaon, Jalamb Road, Khamgaon, Dist: Buldana, (M.S.), Pin 444 303.



No extra charges will be paid for cartage, packing etc. for the material rejected and

replaced.

Quotations will be opened at 3.00 AM/ PM on date 03/01/2019 at office of the Principal

of Institute.



Delivery to the consignee has to be effected within 1 week from the date of issue of

purchase order or on or before the prescribed date. (if any)

The undersigned reserves the right to accept or reject any offer or all offers without

assigning any reason thereof.



Copy to:

1) Hon. Director, Directorate of Technical Education M. S. Mumbai for information please. It is


2) Hon. Joint Directorate of Technical Education Amravati Region, Amravati for information pleases.

It is requested to do needful for uploading the same on website as per instructions issued.

3) Head of Mechanical engineering Department for information and n a . Verify specification and

cost of items.




of 5

No. : GPK/EQP/inst purchase/CED_List-A/2018-19/3257 Date: 01/12/2018

By post / email

To,

……………………….

……………………….

………………………..

………………………..

QUOTATION





Sr. No.

Name of the item with specification Quantity required

Approximate cost per unit ( Inclusive of

GST) (Rs.) Name of the item Specification

1 Digital PH Meter

Major Group =030

Minor Group =032

PH Range= 0 To 14 PH

Accuracy= 0.01 PH

Resolution 0.01PH

Reproductibility 0.01 PH

Power Supply = 230v

02 7000

2 Digital DO Meter Standard 01 7000

3 Electronic Digital

Balance Set

2 kg Capacity

Accuracy :1mg 01 20000

4 Hot Air Oven

Suitable to operate on 220/230V, AC

with digital temperature control by

thermostat in the heating range from

50°C to 250°C.

01 15000

5 COD Reflux Apparatus Complete test set with hot plate 02 10000

6 Jar Test Apparatus

Suitable to operate on 220/230V,

mechanically operated six paddles

having flocculator geared with heavy

duty 1/20 HP motor having variable

speed from 10 to 120 rpm with built

in speed control and illuminated

base.

01 20000

7 Thickness Gauge containing openings for aggregates 01 2000



(07263) 56644 (O), 54609 (R), Fax - (07263) 52278



of 5

sizes 63, 50, 40, 31.5, 25, 20, 16,

12.5, 10, & 6.3 mm as per IS:2386

(Part-1)-1963.

8 Length Gauge

containing openings for aggregates

sizes 63, 50, 40, 31.5, 25, 20, 16,

12.5, 10, & 6.3 mm as per IS:2386

(Part-1)-1963.

01 2000

9

Pensky Marten's Flash &

Fire Point Test (For

Bitumen

Apparatus 100x200x240 mm with

measurement range 0-95 as per IS:

1209-1953.

01 6000

10 Ductility Testing Machine

(For Bitumen)

With ductility mould & base plate.

01 7000

11 Digital Turbidity Meter 3 ½ Digit LED Display

Range up to 1000NTU/JTO 01 7500

12 Chloroscope

Standard having range 0.0-5.0 ppm

with Colorimetric Sensitivity 0.1ppm

and indicator solution.

03 1500

13 Digital Portable Water

Testing Kit: Standard 01 15000

14 Metric Chain – 30m

Length

(Metric Chain consisting of a fixed

number of straight links of

galvanized mild steel wire 4mm.in

diameter. The end of each link are

bent into a loop and connected

together by means of three circular

shape rings. The joints of the rings

may be open or welded preferably

welded. The ends of the chain are

provided with brass handles. The

handle is linked with a swivel joint to

the chain. The length of each link is

200 mm. Each meter is provided

with circular brass ring & each five

meter length is provided with brass

tallies of requisite shapes Each

chain should be provided with 10

nos. of M.S. Arrows of 4 mm

diameter bar and 40 cm. Height.as

per: IS 1492 -1970)

03 3000

15 Prismatic Compass

Made of Gun / Nonmagnetic Metal in

a leather case/plastic with teak wood

/aluminum tripod Stand. Size of

compass 80-110 mm. diameter.

02 2500

16 Dumpy level

200-300 mm, internal focusing

telescope with 200 meters focusing

range, with erect image and desired

magnification.

02 7000

17 Leveling Staff Made of Aluminum body Telescopic

in 3 PCS, 4 meter in length packed 02 1500

of 5

in canvas cover, graduated in

meters, dm, cm and mm with white

background and black strips. 5mm

thick with suitable locking

arrangement.

18 Transit Theodolite

Direct reading vernier Transit

theodolite 127 mm / 178 mm, export

quality fitted with / without Optical

Plummate arrangement, showing

erect image with Horizontal &

Vertical circles containing main

scales & vernier in stainless steel /

Pure silver / Suitable metal along

with trough or tubular compass with

suitable attachment and accessories

in wooden /metal box with telescopic

aluminum / wooden stand & 20/10

sec. accuracy.

02 12000


of 5



The first envelope will contain Technical specifications of the product, technical literature / leaflet

and other documents mentioned below. It is mandatory to the suppliers to submit following documents

without which your quotation will not be considered.

1. Covering Letter for tender on the company letter head mentioning official address, Contact No, E-

Mail address and website (if available) address.


3. EMD in this regard (3% of the quoted cost or Re. 5000 whichever is minimum) to be paid in the

form of DD in favour of Principal, Govt. Polytechnic, Khamgaon OR Exemption certificate from

competent authorities, if exemption is claimed.


5. GST Clearance Certificate / GST Challan for last quarter of the financial year. (Paid up to July

2018)

6. Authorization / Distributorship certificate from manufacturer. Proof of permission to manufacture

7. The equipment / item mentioned in the quotation from competent authorities. (to be submitted if the

bidder is not a manufacturer)



10. Under taking by supplier towards supply of equipment within prescribed date / period and post sales

services.


The second envelope will contain the financial bid in which the all inclusive rates F.O.R. Destination

will be written and signed with the stamp of the establishment in the following format.

Sr.

No.


Quantity

required

All

inclusive

cost per

unit

(Rs.)

All

inclusive

cost for

quantity

mentioned.

(Rs.)

Name of the

item Specifications

Date - (Signature)


of 5





supply of “Civil Engg. Department Equipment” and writing complete address of the







Institute.






any reason thereof.



Copy to:





3) Head of Civil Departments for information.




government polytechnic, khamgaon · 2020. 8. 8. · trainer kit for mosfet trainer kit suitable to...

Documents