gprs data logger [built in gps] gs902 · pdf filegprs data logger [built in gps] server...
TRANSCRIPT
GPS Data & Measurement Logging
2 x Analog Channels + 2 x Pulse Channel + 4 x Digital Channels + 2 x Relay Outputs
Upload Data & GPS information via GPRS and SMS on schedule or alarm triggered
Programmable data logging and upload interval
Temperature Sensor channel [GS902S]
Alert user when temperature is high/low
2MB Internal Memory
GPRS Data Logger [built in GPS] GS902
Overview
♦ Both I/O Data & GPS data tracking via GPRS / SMS
♦ Alarm Alert via GPRS / SMS
♦ GPRS Real Time Data & Historical Data Upload
♦ Real Time Alert on GPS Features
♦ Real Time Alert on triggered alarm input and analog levels
♦ Panic Button triggered GPS data report via GPRS & SMS
♦ Integrated 16 bit MCU & Quad‐band GSM/GPRS Module
Data Logger Features
∗ 2 High Precision A/D Channels
∗ 4 DI [Digital Input] or 2 DP [Digital Pulse] Channels
∗ 2 DO [Digital Output] Channels
∗ Optional 1 Temperature Sensor [‐50 ~ 125°C], programmable high/low alert temperature level
∗ Programmable data capturing type, range, start point, alert high/low and pulse level
∗ Device configuration setup by PC software via USB port
∗ Device parameters checked via SMS or PC software
∗ Programmable Data Upload Interval (5 seconds ~ 24 hours)
∗ Programmable Data Logging Interval (1 min ~ 60 min)
∗ Remote Configuration by SMS or GPRS
∗ USB Port for PC communication
∗ Support Dynamic Domain Name or Fixed IP
∗ Support TCP protocol data transmission
∗ 1MB Non‐volatile Memory maintaining max. 30 days period of data
Channel Specification
Pulse Input: Accumulated 99999999 pulses
5~15VDC input
Pulse Frequency Measure > 20ms
Max. 50 pulses per second
Digital Output: max. DC24V @3A, AC120V @3A
Temperature: ‐55 ~ 150 °C
Analog Input: 4 ~ 20mA
Input Impedance: 250Ω [current type input]
Accuracy: 12bit AD Converter
2.5/ 4096=0.00061 (0.061%)
Digital On/Off Input : Optic coupler dry contact
Triggered Level > 20ms
GPRS Data Logger [built in GPS] Data Logging
Alarm Detection
1. Over speed alert Automatically send alerts when driving speed exceeds user defined speed 2. Position Lock Automatically send alerts when the vehicle is moved apart from its parking position
3. Fencing In (min. 0.18m), multiple points
Alert (SMS/Dial/GPRS) when moving into security zone 4. Fencing Out (min. 0.18m), multiple points
Alert (SMS/Dial/GPRS) when moving out of security zone
5. Panic Button Emergency report with position information for both personal and vehicle alarm 7. Alarm Dry Contact External alarm detecting devices e.g. shock detector, triggered air bag 6. Idle time monitoring An early warning security feature when vehicle is idle longer than prede‐
fined period 8. Analog Input High or Low Alarm, & Pulse Input External sensor devices e.g. temperature transducer alerts user with GPS data
GPS Overview
▪ High precision in location (within 3 meters) and speed (meter per minute)
▪ Logging interval and Upload interval are independent and user programmable
▪ Support international standard NMEA interfacing with other GPS Navigation or Tracking System
▪ Support Google Earth
▪ Server/Client Application Software allows global application with regional services
Sample Application
Tracking:
It keeps users (max. 4 mobile phone & 1 centre) notified of GPS data via both GSM SMS and GPRS network in an user‐defined interval
Automatic Alarm Report:
Not only alarm is reported by dialing, control centre is informed of the accident location via both GSM SMS and GPRS network instantly.
Position Lock:
User activates the “Position Lock” on leaving the car in the car park. When the car is moved out of its position, it will alert user and send the GPS data via both GSM SMS and GPRS network instantly.
GPRS Data Logger [built in GPS] GPS
(a) On Schedule
♦ Data is uploaded every interval via SMS or GPRS
♦ User Programmable upload interval
♦ Data records within the interval will be uploaded in packet
(b) Manual Check
♦ Query by user mobile phone SMS
♦ Command from Server via SMS or GPRS
♦ Command via USB by PC software
(c) Digital Alarm Triggered
♦ Alarm Input (vibration detector)
♦ Panic Button
(c) Analog Alarm Triggered
♦ Low Input Voltage Level Alert
♦ Analog Input Alert High/Low
Oil tank level is too low
♦ Temperature is too high/low
(c) GPS Alarm
♦ Fence In, Fence Out
♦ Position Lock
♦ Idle Time
♦ Over Speed
How to get the live and logged data?
Internet: Using PC to receive GPS data via Internet
GSM SMS: Using mobile phone or GSM modem to receive GPS data via SMS
USB port: Using devices with USB port to retrieve GPS data via USB cable
What information is inside the data packet?
♦ Device ID number
♦ Date Time stamp
♦ Power Voltage Level
♦ GPS data
♦ Speed, Location, Heading Degree
♦ GPS alarm status
♦ Digital Alarm Status
♦ Measured Analog values
♦ Measured Accumulated Pulse value
When will GS902 upload data?
Applications
Fire Vehicles Central Management
♦ Tracking fire vehicle water tank level
♦ Tracking fire vehicle position
♦ Alert on low water tank level
Fleet Management of Cold Food Truck
♦ Tracking temperature levels
♦ Tracking truck position
♦ Alert on high/low temperature
GPRS Data Logger [built in GPS] Data Upload
Specification
Operating Temp: ‐30˚C ~ +70˚C
Standby Temp: ‐50˚C ~ +80˚C
Power Input: DC 9 ~ 24V (DC12V)
Rating: 55mA @12VDC, max. 0.2W
Enclosure: Aluminum Case
Dimension: 100 x 60 x 18 mm
Weight: 92 g
Internal Memory: 1MB
GPRS & GSM
GSM/GPRS Module
GS902B, GS902S, GS902P
∗ Siemens MC55i
∗ GSM Quad Band
∗ 850/900/1800/1900 MHz
∗ [fixed IP & domain name]
* GPS Antenna, GSM Antenna,
* USB Cable, Power Connector
* Microphone Connector
* I/O Connectors (vehicle installation type)
GPS Chip: GSTAR GS‐89
GPS Band: 1575.42 MHz
GPRS/GSM Chip: Quad Band
GPS Standard: +NMEA protocol
GPS Antenna: External
GPS Accuracy: 3~5 meters
Response Time: max. < 120s, the least < 20s
Start Up Time: Power Up: 20~45s
Standby Mode Wakeup: 15~25s
Normal Mode Resume: 5~8s
It is bundled with GS902S.
T_V2
Sensor: DS18B20
Measuring Range: ‐55 ~ 125 °C
Accuracy: +‐0.5 °C
Operating Voltage: 5VDC
Enclosure: Steel Housing
Cable Length: standard 2 meter
Extended Cable: > 100 meter
GPS
Accessories
Temperature Sensor
GPRS Data Logger [built in GPS] Specification
* IP65 waterproof
* Aluminum Case
* Internal 3Ah Rechargeable Battery
Optional Enclosure
Data Capturing Interval 2 seconds
Data Logging Interval Programmable (1 ~ 60 minutes)
Data Upload Interval Programmable (5 seconds ~ 24 hours)
IP Connection Dynamic / Fixed
Protocol TCP
Data Transmission GSM SMS / GPRS Data / USB
Data Upload On Schedule / Manual Request / Alarm Triggered / GPS Alarm
PC Communication Port USB
Internal Data Record Average 30 days (2MB)
Local Setup via USB by PC Software
Remote Configuration via SMS or GPRS
GPS Chip GSTAR GS‐89
Built‐in Quad Band GSM Module Siemens MC55i GSM 850/900/1800/1900MHz
Bundled Software Free Standard Edition
Setup Software Remote (GSM Modem GS300) & Local (USB port)
Centre Software Support txt database, max. 99 data loggers
UPD Testing Tool available
Optional Software Premium Edition
GPS Standard +NMEA protocol
Model Selection
GS902B GS902P GS902S
Enclosure Aluminum Aluminum Aluminum
Low Voltage Alert
Power Input: DC 9~24V
Alarm Input 4 3 4
Panic Button 1 1 1
Pulse Input 0 1 0
Relay Output 2 2 2
AD Channel 2 2 1
Internal Memory 2MB 2MB 2MB
Temperature Sensors — 1 [‐55~125 °C]
GS902P2
Aluminum
3
1
2
2
2
2MB
GPRS Data Logger [built in GPS] Models
How to setup GS902?
[1] Mobile Phone [2] Setup Software
[3] Server Software Premium Edition
How to receive data from GS902?
[1] Server Software Premium Edition
GPRS Data Logger [built in GPS] Schematics
Premium Server Software
♦ Receiving data via Internet & SMS remotely and USB
locally
♦ Display of live data and devices status in real time
♦ Maintaining the record database in xml files
♦ Maintaining the database of GPRS data loggers iden‐
tities and properties
♦ Display status of server, data loggers and clients
♦ Interface for user development and application
♦ Alert user via TCP / Email / SMS
♦ Grouping of user/client/email/SMS phone numbers
♦ Client software support
♦ Support of integrating with:
Access / MySQL / SQL / Oracle Databases
Auto Data Recovery Function:
When live data is lost owing to GSM network problem,
Server will automatically retrieve the logged data from
the data loggers once network resumes.
Client Software
Data Logger Client software provides:
♦ Google Earth support
♦ Downloading data from Server
♦ Real time monitoring of a number of data loggers
♦ Continuous Tracking in real time or history
♦ Alert users when temperature is too high/low
♦ Alert customers via email, SMS or TCP
♦ Historical data review
GPRS Data Logger [built in GPS] Server Software
Edition Centre Premium
[A] Server Software
Receive Data via SMS — Yes
Receive Data via GPRS Data Yes Yes
Receive Data via USB Port — Yes
Live Data Display — Yes
Database txt
Daily only
Access / MySQL
SQL / Oracle
XML — Yes
Data Export to Excel — Yes
Remote Command via SMS — Yes
Remote Command via Internet — Yes
Schedule Command — Yes
Auto Data Recovery — Yes
Temperature Alert [GS902S] — Yes
Send Alarm Alert via TCP network — Yes
Send Alarm Alert via email — Yes
Send Alarm Alert via SMS — Yes
Alert Users Grouping — Yes
Alert Emails Grouping — Yes
Client Software support — Yes
Max. GPS Trackers simultaneous support 99 99999
GPS Trackers Management — Yes
User Authentication & Management — Yes
Network Client Authentication & Management — Yes
Web Based Access support — Yes
SDK for user development — Yes
[B] Client Software N.A. Bundled
Live Data Display — Yes
Alarm Alert — Yes
Graphic Display of Temperature & Humidity — Yes
Temperature & Humidity Hi/Low Alert — Yes
Historical Data Access — Yes
[C] Bundled GSM Modem — Yes
Centre Edition is bundled with GPS Tracker free. Premium Edition is sold separately.
GPRS Data Logger [built in GPS] Software