gr-246-core: telcordia technologies specification … specification points 5. digital signalling...
TRANSCRIPT
GR-246-COREIssue 10 Telcordia Technologies Specification of Signalling System Number 7December 2005 General Contents
v
General Contents
Volume 1
SS7 GENERAL OVERVIEW: T110
MESSAGE TRANSFER PART (MTP): T1.111
T1.111.1 FUNCTIONAL DESCRIPTION OF THE MESSAGE TRANSFER PART
1. General
2. Signalling System Structure
3. Signalling Network
4. Message Transfer Capability
5. Primitives and Parameters of the Message Transfer Part
T1.111.2 SIGNALLING DATA LINK
1. General
2. Signalling Bit Rate
3. Error Characteristics and Availability
4. Interface Specification Points
5. Digital Signalling Data Link
T1.111.3 SIGNALLING LINK
1. Introduction
2. Basic Signal Unit Format
3. Signal Unit Delimitation
4. Signal Unit Acceptance Procedure
5. Basic Error Correction Method
6. Preventive Cyclic Retransmission Error Correction Method
7. Signalling Link Initial Alignment Procedure
8. Processor Outage
9. Level 2 Flow Control
10. Signalling Link Error Monitoring
GR-246-CORETelcordia Technologies Specification of Signalling System Number 7 Issue 10General Contents December 2005
vi
11. Level 2 Codes and Priorities
12. State Transition Diagrams
T1.111.4 SIGNALLING NETWORK FUNCTIONS AND MESSAGES
1. Introduction
2. Signalling Message Handling
3. Signalling Network Management
4. Signalling Traffic Management
5. Changeover
6. Changeback
7. Forces Rerouting
8. Controlled Rerouting
9. MTP Restart
10. Management Inhibiting
11. Signalling Traffic Flow Control
12. Signalling Link Management
13. Signalling Route Management
14. Common Characteristics of Message Signal Unit Formats
15. Format and Codes of Signalling Network Management Messages
16. State Transition Diagrams
T1.111.5 SIGNALLING NETWORK STRUCTURE
1. Introduction
2. Network Components
3. Structural Independence of International and National Signalling Networks
4. Considerations Common to Both International and National Signalling Networks
5. International Signalling Network
6. Signalling Network for Cross-Border Traffic
6A. Signalling Network for Inter-Network Traffic
7. National Signalling Networks
8. Procedures to Prevent Unauthorized Use of an STP
GR-246-COREIssue 10 Telcordia Technologies Specification of Signalling System Number 7December 2005 General Contents
vii
T1.111.6 MESSAGE TRANSFER PART SIGNALLING PERFORMANCE
1. Scope, Purpose and Application
2. Basic Parameters Related to Message Transfer Part
3. Signalling Traffic Characteristics
4. Parameters Related to Transmission Characteristics
5. Parameters of Influence on Signalling Performance
6. Performance under Adverse Conditions
T1.111.7 TESTING AND MAINTENANCE
1. General
2. Testing
3. Fault Location
4. Signalling Network Monitoring
5. Formats and Codes of Signalling Network Testing and Maintenance Messages
6. State Transition Diagram
T1.111.8 NUMBERING OF SIGNALLING POINT CODES
1. Introduction
2. Numbering of International Signalling Points
2A. Numbering of Signalling Points in United States Networks
GR-246-COREIssue 10 Telcordia Technologies Specification of Signalling System Number 7December 2005 General Contents
v
General Contents
Volume 2SIGNALLING CONNECTION CONTROL PART (SCCP): T1.112
T1.112.1 FUNCTIONAL DESCRIPTION OF THE SIGNALLING CONNECTION CONTROL PART
1. Introduction
2. Services Provided by the SCCP
3. Services Assumed from the MTP
4. Functions Provided by the SCCP
T1.112.2 DEFINITIONS AND FUNCTIONS OF SCCP MESSAGES
1. Scope, Purpose, and Application
2. Signalling Connection Control Part Messages
3. Messages for SCCP Subsystem Management
4. SCCP Parameters
5. Parameters for SCCP Subsystem Management
6. Inclusion of Fields in the Messages
T1.112.3 SCCP FORMATS AND CODES
1. Scope, Purpose, and Application
2. Coding of the General Parts
3. SCCP Parameters
4. SCCP Messages and Codes
5. SCCP Management Messages and Codes
T1.112.4 SIGNALLING CONNECTION CONTROL PART PROCEDURE
1. Scope, Purpose, and Application
2. Addressing and Routing
3. Connection-Oriented Procedures
4. Connectionless Procedures
GR-246-CORETelcordia Technologies Specification of Signalling System Number 7 Issue 10General Contents December 2005
vi
5. SCCP Management Procedures
6. State Transition Diagrams
T1.112.5 SIGNALLING CONNECTION CONTROL PART PERFORMANCE
1. Scope, Purpose, and Application
2. Definition of Performance Parameters
3. Specified Values for Internal Parameters
T1.112.6 SIGNALLING CONNECTION CONTROL PART USERS GUIDE
1. Scope
2. Compatibility issues
3. Use of Addressing Parameters
4. SCCP Networking Aspects
TRANSACTION CAPABILITIES (TCAP): T1.114
T1.114.1 FUNCTIONAL DESCRIPTION OF TRANSACTION CAPABILITIES
1. Scope, Purpose, and Application
2. Architectural Concepts and Terminology
3. Overview of TC Functions and Procedures
4. Layer Service Characteristics
5. Structure of T1.114
T1.114.2 TRANSACTION CAPABILITIES DEFINITIONS AND FUNCTION
1. Scope, Purpose, and Application
2. Protocol Messages Requirements
3. Transaction Portion
4. Dialogue Portion
5. Component Portion
GR-246-COREIssue 10 Telcordia Technologies Specification of Signalling System Number 7December 2005 General Contents
vii
6. Parameters
T1.114.3 TCAP FORMATS AND CODE
1. Scope, Purpose, and Application
2. Data Element Encoding
3. Transaction Portion
4. Dialogue Portion
5. Component Portion
6. Parameters
7. Summary of Identifiers
T1.114.4 TRANSACTION CAPABILITIES PROCEDURE
1. Scope, Purpose, and Application
2. Addressing
3. Normal Procedures
4. Abnormal Procedures
T1.114.5 DEFINITION AND FUNCTIONS OF TRANSACTION CAPABILITIES OPERATIONS, PARAMETERS, AND ERROR CODES
1. Scope, Purpose, and Application
2. Operations
3. Errors
4. Parameters
T1.116 OPERATIONS, MAINTENANCE AND ADMINISTRATION PART (OMAP)
1. Scope, Purpose, and Application
2. Operations and Maintenance Procedures for the Signalling Network
3. Operations and Maintenance Procedures for the Exchanges
4. Operations and Maintenance Procedures for both the Signalling Network and Exchanges
GR-246-CORETelcordia Technologies Specification of Signalling System Number 7 Issue 10General Contents December 2005
viii
5. Requirements on the Protocols Used to Support the Operations and Maintenance Procedures
6. Timer Definitions and Values, and Performance Time Definitions and Values
7. State Transition Diagrams and TCAP Package Descriptions
8. ASE Definitions
GR-246-COREIssue 10 Telcordia Technologies Specification of Signalling System Number 7December 2005 General Contents
v
General Contents
Volume 3
INTEGRATED SERVICES DIGITAL NETWORK USER PART (ISDN UP): T1.113
T1.113.1 FUNCTIONAL DESCRIPTION OF THE INTEGRATED SERVICES DIGITAL NETWORK (ISDN) USER PART
1. Scope, Purpose, and Application
2. Services Supported by the ISDN User Part
3. Services Assumed from the MTP
4. End-to-End Signalling
5. Future Enhancements
T1.113.2 GENERAL FUNCTION OF MESSAGES AND SIGNALS
1. Scope, Purpose, and Application
2. Signalling Messages
3. Signalling Information
T1.113.3 FORMATS AND CODES
1. Scope, Purpose, and Application
2. Parameter Formats and Codes
3. ISDN User Part Parameters
4. ISDN User Part Messages and Codes
T1.113.4 ISDN USER PART PROCEDURES
1. Scope, Purpose, and Application
2. Basic Call Control and Signalling Procedures
3. End-to-End Signalling
4. User Facilities
GR-246-CORETelcordia Technologies Specification of Signalling System Number 7 Issue 10General Contents December 2005
vi
T1.113.5 PERFORMANCE OBJECTIVES IN THE ISDN APPLICATION
1. Scope, Purpose, and Application
2. Signalling Availability
3. Signalling Dependability
4. Signalling Delay
5. Signalling System Limitations
T1.113.6 STATE TRANSITION DIAGRAMS
1. Scope, Purpose, and Application
2. State Transition Diagrams
T1.113.7 APPLICATION TRANSPORT MECHANISM
1. Scope
2. References
3. Definitions
4. Abbreviations
5. Chapter Structure
6. Modelling
7. Application Process Functions
8. Single Association Control Function (SACF) - SACF
9. ISDN User Part ASE (ISUP ASE)
10. Application Transport Mechanism ASE (APM ASE)
11. Application Transport Mechanism User ASE (APM-user ASE)
12. Network Interface Function
13. Errors Handling ASE (EH ASE)
14. Application Transport Notification Information
15. Timers
GR-246-COREIssue 10 Telcordia Technologies Specification of Signalling System Number 7December 2005 General Contents
v
General Contents
Volume 4
INTERWORKING BETWEEN SESSION INITIATION PROTOCOL (SIP) AND BEARER INDEPENDENT CALL CONTROL OR ISDN USER PART: T1.679
1. Scope
2. Normative References
3. Definitions
4. Abbreviations
5. Methodology
6. Incoming Call Interworking from SIP to BICC/ISUP at I-IWU
7. Outgoing Call Interworking from BICC/ISUP to SIP at O-IWU
8. Timers