grain handler u.s.a
DESCRIPTION
Grain Handler U.S.A. Why Choose Grain Handler?. Designed for the customer- Custom built controls to suit your needs, Dryer sizes available in multiple ranges. - PowerPoint PPT PresentationTRANSCRIPT
Grain Handler U.S.A.
Why Choose Grain Handler?
Designed for the customer- Custom built controls to suit your needs, Dryer sizes available in multiple ranges.
Expandability- Expand capacity by adding more tiers to your dryer, Upgraded motors can be purchased before you expand to cut expansion costs.
Energy Savings- The Grain Handler dryer uses about 40 CFM per Bushel, Gas consumption costs at less than a cent per point removed.
Single Phase Capability- Our Fan-Under models make it possible to dry up to 5,000 BPH w/ single phase power. More fans to distribute the HP, also means not replacing big expensive high HP motors.
Increased Test Weight- Having a larger holding capacity allows the grain to be heated up over a longer period of time for a gentle drying process, this reduces stress cracking as well.
Low Maintenance- Minimal moving parts, No screens to plug or clean.
Single Gas Trane- All of our models only require a single gas trane, this reduces maintenance and part replacement.
Quality- Grain Handlers are made out of all G90 galvanized construction.
Quiet- We use low speed centrifugal fans which don’t create a lot of noise.
Adaptability- Our control panels can be configured w/ many different moisture controllers, saving you money if you already own one. All components in our panel can be purchased by you, nothing is proprietary to us.
Simple- Running the Grain Handler is easy, a few switches, set your temperature and unload speed.
Re Sale- When it does come time to upgrade, selling your used Grain Handler shouldn’t be a problem or you can simply trade it in.
Internal Vaporizer- Our LP models come w/ an internal vaporizer, save money not having to buy an external vaporizer.
Customer Support- We care about our customers, Service crews and Phone support is readily available.
What is different about our dryer
• Uses less CFM compared to cross-flow style dryers, less CFM means less HP
• Enclosed roof to keep out the elements and used as a pre-
heat section
• Drag conveyors on bottom of dryer to discharge the grain
• Dryers layers are built w/ all the same gauge steel all the way
up
• 1 dryer, 1 gas trane, 1 control panel – no stacking or
modifying
• No screens to plug-up or clean
• Options of gravity fill, level auger, level drag or scalper drag
• Offer conventional or fan-under models
• Better quality grain – food grade quality - our dryers are
gentle on the grain
• Multiple smaller motors instead of larger ones
Cost Savings
• Electricity – 40 CFM per bushel compared to 80/100
• Fuel – Requires less BTU’s per pound of water
removed
• Vaporizer included on LP models
• Increased test weight – Dries evenly, no blending
• No down time for cleaning
• Re-use your existing moisture controller
We also Offer
• Conveyor drags
• Scalper Drags
• Pit Curve-up Drags
• Catwalk
• Towers
• Bean Ladders
• Y-Discharge Transitions