greenbuilding solutions
DESCRIPTION
Rhino Group of companies, solutionsTRANSCRIPT
GREEN BUILDING SOLUTIONS
Solutions Covering SANS 10400 XA : National Building Regulations
Rhino Group of Companies
- INDEX -
1. Introduction to the Rhino Group
2. 3D product overview : Residential & Commercial/Industrial
3. Overview of projects completed by the Group
4. Construction sheeting
5. Envirotuff roofing & wall insulation (Radiant barriers)
6. Profiled polycarbonate roof sheeting
7. Solid sheet polycarbonate roofing sheeting
8. Multiwall hollow polycarbonate sheeting
9. Double Glazing solutions for all buildings
10. Showerheads - Water and Energy Saving (Oxygenics)
11. Rain Water Harvesting and Water Storage Solutions
12. Biogas Digester System
13. Black Water Effluent Treatment Plants
14. Complete Water Purification Systems
15. Ozone Water Treatment Solutions (tap to Industrial/Municipal Plants)
16. Ozone Air Treatment units (portable/Treatment via Air Duct Systems)
17. Water Heating Solutions : Solar Systems and Heat Pumps (Ind/Res)
18. Solar PV Systems (Hybrid – Res & Large scale Off Grid Solutions – Ind)
19. Large scale Power Plants (Solar Farms, CSP and Biogas) fully integrated
20. LED Lighting (down lights/industrial high bays/floodlights
21. Irrigation Solutions for developments
22. Water features & dams (water storage) Design/supply/installation
23. Under floor Heating Solutions (Heat Storage Tanks & Cooling options)
24. Solar Geysers (full range of products)
25. Air Conditioners (Energy Efficient)
26. Construction Accessories
Introduction to the Rhino Group
From humble beginnings as a plastic recycler more than 30 years ago, the Rhino Group has diversified extensively; initially into the manufacturing of plastic sheeting & films for the construction, packaging and agricultural sectors, as well as irrigation piping into the latter as well, to representing a myriad of international suppliers so as to trade successfully into those same sectors and build sizeable market shares.
The Rhino Group continued to grow through investment into its’ own distribution structure, with own branches in Port Elizabeth, East London, Johannesburg and Cape Town, along with own warehousing capacity, plus then a network of agents throughout South Africa and a number of neighbouring countries. Employee numbers continued to grow over the years, totalling now around 300.
Group strategy has more recently led to investments into renewable energy and water treatment solutions, with Rhino Energy Solutions and Rhino Water Technologies being formed, working closely with leading national specialists in such fields. Rhino AgriVantage was also formed pursuant to enhancing our agricultural presence.
Two pivotal elements of the Rhino Groups’ strategies are:
• Green building solutions [incorporating construction materials, passive design elements, energy demand mitigation & renewable energy supply as well as rainwater harvesting & waste water recycling]. Our historic involvement in the construction sector, including through the distribution of rated insulation material, has ensured understanding of and alignment with the new SANS 10400 XA New Building Regulations.
• ‘Food-Energy-Water’ [agricultural supplies, fertilisers, irrigation – as well as the energy and water solutions as captured in the bullet point above]
Significant synergies exist between the various elements, thereby very often ensuring unique turnkey abilities; in addition, a solutions-centric approach versus product push creates further value.
Examples of some recent or current turnkey projects include:
• King Shaka International Airport [Durban] – initially secured under tender, with European associates, +-R300m project for the design, erection and commissioning of largest greenhouse project in SA, then Rhino secured numerous tenders/projects to attend to all rainwater harvesting and effluent treatment to irrigate the greenhouse production, as well as damlining and other water-related work, plus then one of just a few invited to tender for the solar energy solution at the airport
• A large eco-estate – overall hybrid solar/biomass solution for the entire development, consulting on the electrical backbone to facilitate renewable energy, solar solutions [power, water, under-floor heating] at residential unit level, passive design/energy demand mitigation, rainwater harvesting and all waste water recycling. Agricultural support to such ancillary initiatives at the estate
• Similar holistic solutions for other developments
• Solar park installations, from 1MW to 60MW
Our strategic intent is very much encompassed in the statement ‘Partnering with Professionals’ and as such we would appreciate any opportunity to engage further with you.
Some Examples of Various Projects the Rhino Group has been Involved in around the Country
Aquaculture Project Value ± Ten Million Rand
Mushroom Project Value ± Three Million Rand
Damlining together with Floating Covers Value ±Four Million Rand
Dube Turnkey Greenhouse Project Value ± Three Hundred Million Rand
Greenhouse Projects ± Twenty Million Rand
Irrigation Projects
Containerized Schools for Samsung – Madiba’s Village
50KW Grid Tied System
360 Schools Off Grid Throughout the Eastern Cape
Full Range of SABS Approved Dampseal Waterproof Membrane
Type A (Orange) 3m to 6m 500mic to 1000mic Type D (Orange) 3m to 6m 250mic to 375mic Type B (Black) 110mm to 600mm 375mic Type E (White) 1,5m 250mic Type C (Green) 3m to 6m 250mic Type F (Black) 1m to 6m 250mic
Manufactured in Facility that is ISO 9001 Compliant with full Quality Systems in Place
Coping and Roof Slab Cavity Wall Construction Solid Wall Construction Solid Wall Construction Solid Wall Construction
External Tanking Under Surface Beds Drained Cavity System Overlaps and Joints
Dampseal Membrane Installations
Full Range of Roof & Wall INSULATION MATERIALS Manufactured and Compliant with SANS 428
5 products in the Envirotuff range. RESIDENTIAL APPLICATIONS: (UNDERTILE MEMBRANE) Envirotuff 199 : Undertile membrane ASTM E84 Class 1 Fire rating m² .K/W = 0.59 (R Value) RESIDENTIAL APPLICATIONS: (INSULATION RADIANT BARRIERS) Envirotuff 200 : Double sided aluminium/mpet insulation SABS & SANS 10177-5/10. ASTM E84 Class 1 Fire Rating m² .K/W = 0.8 (R Value) Envirotuff 201 : Single sided aluminium/woven PE insulation SABS & ASTM E84 Class 1 Fire Rating m² .K/W = 0.8 (R Value) Envirotuff 202FR : Double sided alu/woven PE/alu insulation SABS & SANS 10177-5/10. B/B1 fire rating. m² .K/W = 1.2 (R Value) COMMERCIAL/INDUSTRIAL APPLICATIONS: (INSULATION RADIANT BARRIERS) Envirotuff 203FR : Double sided aluminium SABS & SANS 10177-5/10/11 B/B1/2/H only USP fire rating. m² .K/W = 1.2 (R Value)
SANS 10400 XA / SANS 428 compliance information
SABS : SOUTH AFRICAN BUREAU of STANDARDS SANS : SOUTH AFRICAN NATIONAL STANDARDS TIASA : THERMAL INSULATION ASSOCIATION of SOUTHERN AFRICA SANS 10400-A : 2010 Edition 3, National Building Regulation. The application of the National Building Regulations Part A: General principles and requirements. SANS 10400-XA : 2011, 9 November. Amendment to the New Building Regulation : Energy Usage In Buildings (XB and XC to follow) SANS 204 : 2011 : Energy Efficiency in Buildings referred to by 10400-XA. - to be tested in accordance with SANS 428 SANS 428 : The fire performance classification of thermal insulated building envelope systems. - To be tested in accordance with SANS 10177-5 / 10177-10 / 10177-11(com/ind)
Warranty Loss of light Transmission – 10 year Warranty
For a period of 10 years, the light transmitting properties of
TUFLITE® Corrugated UV sheets will not decrease by more
than 10% from their initial value when measured in accordance
with the test method specified in ASTMD 1003 – 1998. This
warranty applies from the date of original purchase and is valid
only to the original purchaser of the product (claims must be
accompanied by an original purchase receipt). The product
must have been stored, installed and cleaned in accordance
with the manufacturer’s recommendations.
Weather Breakage
For a period of 5 years, TUFLITE® Corrugated UV sheets
will not break or fracture as a result of the impact of hail
measuring up to 15mm in diameter. Damage caused by the
impact of objects other than hail is excluded from this
warranty. It is responsibility of the purchaser to obtain the full
warranty conditions. These are available from the distributor.
Any claim must be made to the distributor.
REDISCOVERING DAYLIGHT
10* Year Warranty
CORRUGATED Profiled Polycarbonate Sheet
TUFLITE®
TUFLITE® CORRUGATED TUFLITE® Corrugated UV Co-extruded profiled polycarbonate sheets have been engineered to suit industrial roof lighting and
daylight cladding applications for a wide array of specific needs. These include Industries, warehouses, commercial structures
and also residences. Sunlight is abundantly available during the daytime and TUFLITE® Sheets help you to conveniently
harness this boundless resource resulting in reduction of energy costs and reducing the effects of industrialization on the
environment. TUFLITE® Corrugated UV Sheets provide excellent impact resistance, a very wide range of light transmission
options and enhanced safety due to its excellent fire resistant (self extinguishing) properties. The co-extruded UV protective
layer ensures that the sheets have superior resistance to weathering and the mechanical & optical properties of the sheets
remain intact for an extended period of time. In a nutshell, TUFLITE® Corrugated UV sheets are 250 times stronger than glass,
suitable for extreme weather conditions and can be deployed for use in hostile chemical environments. TUFLITE® sheets are
corrosion resistant and offer near total protection from harmful Ultraviolet radiation of the sun.
TUFLITE® Corrugated UV sheets are available in clear transparent, embossed and textured options. Typical applications for
TUFLITE ® Corrugated UV sheets include roofing and cladding daylight panels in industrial sheds, warehouses and public
buildings, central atria in shopping malls, swimming pool roofs, greenhouses, verandas, pergolas, patio covers, awnings,
carports, gazebos and the list can go on...
Fire Retardant (Self Extinguishing)
TUFLITE® Corrugated UV sheets have an excellent
flammability rating (UL94 V-2), are self extinguishing and
suitable for use in areas prone to fire. These sheets do not
release toxic gases and are comparatively much less
flammable than GRP & Acrylic (PMMA) sheets.
Excellent Impact Resistance
TUFLITE® Corrugated UV sheets possess exceptional
impact resistance. Manufactured from high quality Bayer ®
polycarbonate resin, which has 250 times the impact
strength of glass and up to 40 times that of
Acrylic (PMMA) sheets of similar thicknesses. TUFLITE®
Corrugated UV sheets are virtually unbreakable.
Superior Clarity & Light Transmission
Clear TUFLITE® Corrugated UV sheets are as transparent
as glass and have a light transmission of 90%. These
sheets are also available in translucent configuration for
better light diffusion.
Weather Protected
TUFLITE® Corrugated UV Co-extruded sheets possess a
special Ultraviolet barrier, which cuts off 99.9% of sun’s
harmful ultraviolet radiation. This protection ensures
zero damage to UV sensitive products like furnishings and
upholstery, paint, carpets and also prevents harm to the
human skin. Further, this UV layer is co-extruded and
hence cannot peel or delaminate from the sheet, ensuring
long term durability and sustained weather protection.
Design Flexibility
TUFLITE® Corrugated UV sheets can be cold curved in
both directions. That is parallel or perpendicular to the line
of corrugation. This offers design flexibility to install these
sheets over curved roofs or walls (Radius of
curvature will be defined by the profile and thickness of
sheet to be used).
Broad Range Temperature Resistance
TUFLITE® Corrugated UV sheets remain stable under
extreme climatic conditions, remaining virtually unchanged
between temperatures of -40ºC and +120ºC. This signifies
that the sheets can perform below freezing point and above
boiling point of water. Adequate allowance needs to be
made for thermal movement in the fixing arrangement.
Better Heat / Thermal Insulation
TUFLITE® Corrugated UV sheets exhibit better
insulation values against heat or cold when compared
to glass or GFRP sheets.
Handling With Ease
Due to their relatively light weight and high impact
strength, TUFLITE® Corrugated UV sheets are
convenient to store, handle and install. Conventional
tools can be used to cut, trim or drill holes in the sheets.
Chemical Resistance
TUFLITE® Corrugated UV sheets are resistant to a
wide range of chemicals. They are generally unaffected
by acids, alcohols, glycols, mineral oils, animal and
vegetable fats, kerosene and non-abrasive cleaners.
However, they are affected by benzene, petrol, ketones,
acetones, phenols, chlorinated and aromatic
hydrocarbons, petroleum based paints, abrasive
cleaners and solvents. For more information contact
your distributor for a data sheet.
Simple Maintenance
Clean using a mild detergent and warm water. Use a
soft sponge. Rinse thoroughly with clean water.
TUFLITE® Corrugated UV Warranty
TUFLITE® Corrugated UV sheets are backed by a 10
year warranty against loss of light transmission and a 5
year warranty against hail breakage. Provided that all
installation conditions are satisfied, these warranties will
be honoured anywhere in the world where TUFLITE®
Corrugated UV sheets are sold.
Product Range
Product TUFLITE® (UV1)
Description: Corrugated Polycarbonate sheet with One
side UV Coating
Product TUFLITE® Plus (UV2)
Description: Corrugated Polycarbonate Sheet with
both sides UV Coating.
Warranty Loss of light Transmission – 10 year Warranty
For a period of 10 years, the light transmitting properties of
TUFLITE® Corrugated UV sheets will not decrease by more
than 10% from their initial value when measured in accordance
with the test method specified in ASTMD 1003 – 1998. This
warranty applies from the date of original purchase and is valid
only to the original purchaser of the product (claims must be
accompanied by an original purchase receipt). The product
must have been stored, installed and cleaned in accordance
with the manufacturer’s recommendations.
Weather Breakage
For a period of 5 years, TUFLITE® Corrugated UV sheets will
not break or fracture as a result of the impact of hail
measuring up to 15mm in diameter. Damage caused by the
impact of objects other than hail is excluded from this
warranty. It is responsibility of the purchaser to obtain the full
warranty conditions. These are available from the distributor.
any claim must be made to the distributor.
10* Year Warranty
TUFLITE® SOLID SHEETS Through Scorching summers, Torrential rains and Freezing winters, the high impact resistant TUFLITE® Solid Polycarbonate
sheets can withstand the extremities of weather. TUFLITE® combines a unique combination of features, allowing a wide range
of applications in the modern world.
Polycarbonates are one of the most advanced polymers, in the field of Plastics today. They offer unequalled mix of desirable
properties like High impact strength, Transparency, Light weight, Flexibility, Durability, Thermal resistance & Fire resistance.
Fire Retardant (Self Extinguishing)
TUFLITE® Solid sheets have an excellent flammability rating
(UL94 V-2), are self extinguishing and suitable for use in areas
prone to fire. These sheets do not release toxic gases and are
comparatively much less flammable than GRP & Acrylic (PMMA)
sheets.
Excellent Impact Resistance
TUFLITE® Solid sheets possess exceptional impact resistance.
Manufactured from high quality Bayer polycarbonate resin, which
has 250 times the impact strength of glass and up to 40 times that
of Acrylic (PMMA) sheets of similar thicknesses. TUFLITE® solid
UV sheets are virtually unbreakable.
Superior Clarity & Light Transmission
Clear TUFLITE® Solid sheets are as transparent as glass and
have a light transmission of 90%. These sheets are also available
in translucent configuration for better light diffusion.
Weather Protected
TUFLITE® Solid sheets possess a special Ultraviolet barrier,
which cuts off 99.9% of harmful ultraviolet radiation. This
protection ensures zero damage to UV sensitive products like
furnishings and upholstery, paint, carpets and also prevents harm
to the human skin. Further, this UV layer is co-extruded and hence
cannot peel or delaminate from the sheet, ensuring long term
durability and sustained weather protection.
Design Flexibility
TUFLITE® Solid sheets can be cold curved in both directions.
That is parallel or perpendicular to the line of extrusion. This offers
design flexibility to install these sheets over curved roofs or walls
(Radius of curvature will be defined by the thickness of sheet to be
used).
Broad Range Temperature Resistance
TUFLITE® Solid sheets remain stable under extreme
climatic conditions, remaining virtually unchanged between
temperatures of -40ºC and +120ºC. This signifies that the
sheets can perform below freezing point and above boiling
point of water. Adequate allowance needs to be made for
thermal movement in the fixing arrangement.
Better Heat / Thermal Insulation
TUFLITE® Solid sheets exhibit better insulation values
against heat or cold when compared to glass or GRP sheets.
Handling With Ease
Due to their relatively light weight and high impact strength,
TUFLITE® Solid sheets are convenient to store, handle and
install. Conventional tools can be used to cut, trim or drill
holes in the sheets.
Chemical Resistance
TUFLITE® Solid sheets are resistant to a wide range of
chemicals. They are generally unaffected by acids, alcohols,
glycols, mineral oils, animal and vegetable fats, kerosene
and non-abrasive cleaners. However, they are effected by
benzene, petrol, ketones, acetones, phenols, chlorinated and
aromatic hydrocarbons, petroleum based paints, abrasive
cleaners and solvents. For more
information contact your distributor for a data sheet.
Simple Maintenance
Clean using a mild detergent and warm water. Use a soft
sponge. Rinse thoroughly with clean water.
TUFLITE® Solid Sheets Warranty
TUFLITE® Solid sheets are backed by a 10 years warranty
against loss of light transmission and a 5 years warranty
against hail breakage. Provided that all warranty conditions
are satisfied, these warranties will be honoured anywhere in
the world where TUFLITE® Solid sheets are sold.
Product Range
Product Description
TUFLITE®- e Solid Polycarbonate sheet with UV Stabilisers
TUFLITE® Solid Polycarbonate sheet with UV Co-extrusion on one side
TUFLITE® EMBOSSED Textured Polycarbonate sheet with UV co-extrusion one side
TUFLITE® Plus Solid & Embossed Polycarbonate sheet with both sides UV co-extrusion
TUFGARD Abrasion resistant Polycarbonate sheets Both Sides
Warranty Loss of light Transmission – 10 year Warranty
For a period of 10 years, the light transmitting properties of
TUFLITE® Corrugated UV sheets will not decrease by more
than 10% from their initial value when measured in accordance
with the test method specified in ASTMD 1003 – 1998. This
warranty applies from the date of original purchase and is valid
only to the original purchaser of the product (claims must be
accompanied by an original purchase receipt). The product
must have been stored, installed and cleaned in accordance
with the manufacturer’s recommendations.
Weather Breakage
For a period of 5 years, TUFLITE® Corrugated UV sheets will
not break or fracture as a result of the impact of hail measuring
up to 15mm in diameter. Damage caused by the impact of
objects other than hail is excluded from this warranty. It is
responsibility of the purchaser to obtain the full warranty
conditions. These are available from the distributor. Any claim
must be made to the distributor.
10* Year Warranty
TUFLITE® MULTIWALL SHEETS
Technical Data
UV protection
Values mentioned are based on Polycarbonate Resins as
stated in literature TUFLITE® multiwall sheets restrict the
transmission of more than 99.9% of harmful UV radiation from
sunlight. The co-extruded UV barrier protects the sheet from
physical degradation and discoloration. The sheets remain
stable under extreme temperature conditions (-40ºC to +
120ºC).
Fire Performance
TUFLITE® Multiwall is suitable for use in areas prone to fire
hazards. Inherently the sheets are self extinguishing and do not
aid flame spread. These sheets conform to most international
standards on fire retardance. TUFLITE Multiwall sheets do not
release toxic fumes and hence pose no hazard to human life in
case of fire.
Wind Load
TUFLITE® Multiwall sheets are suitable for use in high wind
load areas. Please visit our website for further details and
specific installation instructions.
Handling, Storage and Cleaning
Store sheets on a flat surface (with the longest length at
the bottom) Ensure sheets are not stored in direct sunlight
when stored in a stack; sunlight may cause the sheet to
heat up and distort. Masking film may be difficult to
remove. Ensure sheets are protected against atmospheric
conditions Use timber bearers to support sheets
Rinse sheet with lukewarm water. Wash with mild soap or
detergent and a soft cloth or sponge. Hose down
thoroughly. Dry with soft cloth to prevent water marks.
Do not allow moisture to enter the flutes.
Chemical Resistance
TUFLITE® Multiwall is affected by: benzene, petrol,
ketones, acetone, phenols, chlorinated and aromatic
hydrocarbons, and petroleum based paints, abrasive
cleaners and solvents.
Properties Characteristics Value Measurement Standard
Mechanical
Yield stress
Stress at Break
Yield Strain
Strain at Break
Tensile Modulus
Impact strength
Izod Notched
Hardness
Physical
Density
Refraction Index
Moisture Absorption
Thermal
Linear thermal expansion
Thermal Conductivity
VICAT Softening Point
HDT
Service Temp
Mechanical
66 70
6.2
120
2200
80
90
110
1.2
1.58
0.30
0.65
0.20
146
137
-40 to +120
Mpa
Mpa
%
%
Mpa
kJ/m2
kJ/m2
N/mm2
g/m3
n
%
10-4/K
/(m-K)
C
C
C
ISO 527
ISO 527
ISO 527
ISO 527
ISO 899
ISO 7391
ISO 180
ISO 180
ISO 1183
ISO 489
ISO 62
ISO 11359
ISO 8302
ISO 306
ISO 75
Rhino Plastics Warehouse in Johannesburg Daylight harvesting – Polycarbonate + LED lighting
Old lighting system = 18 high bays (400w each) x 8 hours/day (22 days/month) = 1267kw / month
x 24 hours/day (22 days/month) = 3802kw / month
New LED system + polycarbonate = 18 LED high bays (40w each) x 8 hours/day (22 days/month) = 127kw / month
x 24 hours/day (22 days/month) = 380kw / month
Using Polycarbonate sheeting you can potentially reduce your lighting usage from 50% – 90%.
Residential
Double Glazing Solutions in Accordance with SANS 10 400XA and SANS 204
Industrial
Commercial
Double Glazing Solutions – Technical Data to Assist with Compliance to SANS 10400XA and SANS 204
Rainwater Harvesting and Water Storage
Industrial and Large Scale Solutions
Commercial Solutions
Agricultural Solutions
Residential, Industrial and Agricultural Solutions
Bury the digester in a 3 m x 3m hole Connect up to grey and/or black water system
Connect digester up to gas user point eg: kitchen stove or water heater
Backfill hole with cement stabilized sand filling with waste water at the same time
Only the top 50 cm of the 2 manhole covers are visible above the ground Prime with cow manure, stir and 3 weeks later start feeding with organic waste i.e. all your - kitchen waste excluding bones, - all your garden waste excluding branches, - all animal manure and sewage (optional)
Cook on a biogas appliance Cover flow to a reed bed, the sewer or a soak away. If no black water (sewage) is involved, use the overflow water for irrigation. It is rich in bio-available nutrients that will benefit your garden.
Bio Digester Systems
Minimal level of gas in gas compartment
Intermediate level of gas in gas compartment
Maximum level of gas in gas compartment
Biogas
Effluent Treatment (Blackwater) from Single Household, Game Lodge, Town House Project to Shopping Complexes
Membrane Bioreactor Systems Permanent Water Treatments Solutions Housing complexes,
Townhouses. Lodges, Resorts etc.
STEP 1 : PUMP STATION : where all sewage and waste water is collected from the settlement. STEP 2 : BIOREACTOR TANK : where nitrification and denitrification takes place. STEP 3 : CLARIFICATION TANK : where sludge settles at the bottom of the tank & the clear water is separated at the top. STEP 4 : STERILIZATION TANK : where the clear water is treated either by Ozone or Ultraviolet and is now ready for recycling.
Water Purification Systems
Sand Filtration
UV Sterilization
Carbone Filtration
Reverse Osmosis
Ozone Water Treatment
Spas & Jacuzzi
Commercial Kitchens
George Laundry
Residential Kitchens
Anglo Plats Modikwa Mine
Midvaal Water Treatment Works Plettenberg bay
Plettenbergbay/Midvaal SASOL Ushaka Island Aquarium
L’Oreal
Ozone Air Treatment Systems
Hotel Room E.G Soccer City Stadium
ICU Hospital General Wards Gym
Forensic Pathology Mortuaries
Casino Ducting - Smoking Areas
Offices
Kitchens Butcheries
Solar Water Heating and Heat Pump Solutions to Comply with New SANS 10400XA Building Regulations that makes it Mandatory to Heat at Least
50% of All Hot Water in All New Buildings
Flat Plate Solar Water Heating
Evacuated Tube Solar water Heating
Heat Pumps for Residential and Industrial Water Heating
Swimming Pool Heating
Solar PV and Hybrid Systems
PV Solutions for Business
UPS Solutions for Business and Residential
Hybrid Systems, PV and Wind
PV Solutions for Residential and Lodges
(C.S.P) Concentrated Solar Power Options
Solar Car Park Options
Biogas Options
Roof Top Solar Options
Solar Farms
LED Lighting Solutions Saves up to 90% of Energy Consumed
LED Solutions Residential
LED Solutions Commercial
LED Specifications
Energy Efficiency
& Energy Costs
Light Emitting Diodes Incandescent Compact Fluorescents
(LEDs) Light Bulbs (CFLs)
Life Span (Average) 50,000 hours 1,200 hours 8,000 hours
Watts of Electricity used
(equivalent to 60 watt bulb). LEDs use less power (watts) per
unit of light generated (lumens .)
6- 8 Watts 60 Watts 13 - 15 Watts
LEDs help reduce greenhouse
gas emissions from power plants and lower electrical bills
Kilo-watts of Electricity used
(30 Incandescent Bulbs per year 329 KWh/yr 3285 KWh/yr 767 KWh/yr
equivalent)
Annual Operating Cost
(30 Incandescent Bulbs per year $32.85/year $328.59/year $76.65/year
equivalent)
Environmental Impact Light Emitting Diodes Incandescent Light Compact Fluorescents
(LEDs) Bulbs (CFLs)
Contains the TOXIC Mercury No No Yes - Mercury is very toxic to
your health and the environment
RoHS Compliant
Yes Yes No - Contains 1mg - 5mg of Mercury and is a major risk
to the environment
Carbon Dioxide Emissions (30 bulbs per year)
451 pounds/year 4500 pounds/year 1051 pounds/year
Lower energy consumption decreases:
CO2 emissions, sulfur oxide, and high- level nuclear waste.
Light Output Light Emitting Diodes
(LEDs) Incandescent Light
Bulbs Compact Fluorescents
(CFLs)
Lumens Watts Watts Watts
450 4 - 5 40 9 - 13
800 6 - 8 60 13 - 15
1,100 9 - 13 75 18 - 25
1,600 16 - 20 100 23 - 30
2,600 25 - 28 150 30 - 55
Irrigation and Water Solutions
Water Features and Dam Installations
Agricultural and Industrial Dams
Dams with Floating Covers
Under Floor Heating Solutions
Systems with Radiators Radiators distribute heat by convection currents, which can result in draughts and hot spots. The floor will be the coldest zone of the room, as hot air rises, and the space above your head will be the warmest part of the room. Radiators transfer heat into a room largely by convection from a hot metal surface. Because the surface of the radiator is small, in comparison to the volume of the room, it needs a high heat input and doesn’t spread the heat evenly. Convection currents circulate allergens, dust particles, fumes and germs which are then distributed around the building, contributing to an unhealthy atmosphere.
Underfloor Heating Underfloor heating systems are simple to install, low maintenance and cost-effective to run. The room is heated by radiation, the most natural and comfortable form of heating, creating an even, comfortable environment with no hot or cold draughts. Rooms with high ceilings such as churches, sports halls or industrial units gain even greater benefits. With radiator systems, some of the heat is immediately wasted as it rises to the ceiling. With an underfloor heating system, the heat is concentrated at floor level where it is most needed. In rooms with large areas, underfloor heating is the only way to heat the centre of the floor area effectively.
Floor Surface Temperatures Floor surface temperatures should not exceed certain levels otherwise discomfort and damage to the floor can occur. The maximum recommended temperatures are : occupied areas, 29°C, peripheral areas, 35°C, bathrooms, 33°C. The floor surface temperature will vary according to the heat output requirements of the room or building.
Floor Coverings Floor coverings such as carpet, underlay and timber reduce the floor heat output. Please check with us to confirm suitability. Some floor coverings, especially timber and vinyl floors, have a recommended maximum floor surface or sub floor temperature that they can operate at; if a higher temperature is used it can damage the floor covering. Manufacturers data sheets should be checked to confirm the coverings suitability.
Under Floor Heating Systems Cross Section Examples of Different Systems
Raufix system – Floor covering, 75mm screed, edge insulation, UFH pipe, Raufix rail, subfloor
Tacker sheet system – Floor covering, 75mm screed, edge insulation, UFH pipe, Tacker Sheet, subfloor
Industrial floor heating – Floor covering, 75mm screed, edge
insulation, UFH pipe, Tacker sheet, subfloor
Thermally Activated Building Structure (TABS) – Concrete
structure with PE-Xa integrated within the slab
Diffusion plate system – Floor covering , chipboard, UFH pipe,
aluminium plate, insulation, joist hanger
Floating floor system – Floor covering, dry floor element, edge insulation, UFH
pipe, foil faced pre-routed panel, insulation, PE membrane, subfloor
Sprung floor – Floor covering, dry floor element, edge insulation, UFH pipe, foil faced pre-routed panel, insulation, PE
membrane, subfloor
The Natural Way to Stay Cool
The transference of heat energy through radiation is a much more gentle and natural way for the human body to cool
down. Combine this with the even room temperature of a concrete core tempered building and the result is a more
comfortable environment for all occupants, even at slightly increased room temperatures.
Less Infrastructure
A building using concrete core tempering only needs a small
air conditioning system to remove peak heat loads, dehumidity the air (to avoid condensation on cold floors and
ceilings), and to supply fresh air. The main cooling load is covered by the concrete core tempering system, allowing for reduced air exchange rates, air handling units, ducts or fans.
Awadukt Thermo ground-air heat exchanger is providing to be a popular choice for the residential
sector, particularly in combination with a mechanical ventilation heat recovery unit (MVHR). It exploits the
natural temperature of the earth by drawing ventilation air through underground pipes, buried at 1.5m deep. This pre-heats the air in the winter and
pre-cools the air in the summer, offering a simple but effective way of saving energy. For a standard house,
around 40-60m of DN200 pipe is required.
Operation principle of the ground air-heat exchanger in summer Operating principle of the ground air-heat exchanger in winter
The transfer is much more effeciant by water in comparison to air, with the storage capacity of thermal energy for water a thousand-fold higher per unit of volume than of air
Benefits of Under Floor Heating
Energy Efficiency • Underfloor heating is the most energy
efficient way of transferring heat into a room and can consistently deliver substantial energy savings compared to radiator systems.
• Because underfloor heating systems benefit from the use of lower water temperatures throughout the system (rather than hot water in radiator systems), condensing boilers can generally run at greater efficiency, saving even more energy costs.
• By providing a constant heat, underfloor heating allows occupants to feel more comfortable at a lower temperature.
Interior Design • Out of sight, underfloor heating gives a total
flexible layout, with no radiators to limit interior designs and furniture arrangement.
• Underfloor heating is compatible with most types of floor covering. The interior designer has more freedom to specify most types of floor covering whether it be tiles, wood, laminates or carpets.
• Even though it can’t be seen, underfloor heating adds perceived value to the property.
Health & Safety • Underfloor heating systems eliminate
radiators (which can potentially be a health and safety risk because of their high surface temperatures and sharp edges).
• Moisture levels in floor coverings are reduced, which reduces microbiological growth and the risk of slipping. In carpets it virtually eliminates dust mites.
• As there is no convection driven airflow, and the circulation of bacteria and pollen is reduced, the indoor air quality is cleaner and healthier.
Construction Accessories
Geyser Blanket Up to 28 % Savings on Heat
Loss
Speedymask
Polycarb Burglar Proofing
Plastic Joining Tape & Aluminium Insulation Joining
Tape
Polywire for Supporting Insulation
Polycarb Burglar Proofing
Skyvent Roof Turbine
Butyl Sealant Tape
Profiled Polyclosures Polycarbonate Profiled Flashings
Polycarbonate Skytile
Hex Magnetic Socket Class 3 & 4 Steel &
Timber Fixings
HEAD OFFICE ADDRESS P.O BOX 4241, KORSTEN, PORT ELIZABETH, 6014 · 15 VOYLE STREET, SYDENHAM, SOUTH AFRICA
TEL:+27 41 451 3197, FAX:+27 41 451 2223 · E-MAIL: [email protected]
RHINO WESTERN CAPE – CAPE TOWN Postal Add: PO Box 108, Eppingdust 7475 Physical Add: 17 Textile Rd, Parow Industria Tel: 021 – 932 6601 Fax: 021 – 932 6651 E-mail: [email protected]
RHINO PLASTICS & AGENT CONTACT DETAILS
RHINO PLASTICS – JOHANNESBURG Postal Add: PO Box 13129, Whitfield 1467 Physical Add: 20 Duncan Street, Lillianton, Boksburg 1000 Tel: 011 – 826 5411 Fax: 011 – 826 4290 e-mail: [email protected]
RHINO PARK – EAST LONDON STORE Physical Add: Robbie de Lange Road, Wilsonia, East London Tel: 043 – 745 0024 Fax: 043 – 745 2108
E-mail: [email protected]
RITSELF 2 (PTY) LTD T/A COMMODITY SALES Postal Add: PO Box 11131, Southernwood 5213 Physical Add: 3 Leo Ladin, Wilsonia, East London Tel: 043 – 745 1223 (Ask for Fax)
INGS AGENCIES - BLOEMFONTEIN Postal Add: PO Box 84, Bloemfontein 9300 Physical Add: 8 Barlon Street, Hilton, Bloemfontein Tel: 051 – 448 2583 Fax: 051 – 447 8981
E-mail: [email protected] (Isabel Sales)
MARCONICOR / HEIDELCOR - HEIDELBERG Postal Add: PO Box 341, Heidelberg 2400 Physical Add: 8 Bunsen Street, Heidelberg, Gauteng Tel: 016 – 341 6130 Fax: 016 – 349 1096
E-mail: [email protected]
CAMPBELL PLASTICS - NELSPRUIT Postal Add: PO Box 644, Nelspruit 1200 Physical Add: Block D1, Axis Park, Wilkens Road, Rocky Drift Tel: 013 – 758 1243 Fax: 013 – 758 1243 (Ask for Fax)
E-mail: [email protected]
IMPI WIRE - GEORGE Postal Add: PO Box 1848, George 6530 Physical Add: 14 Foundry Street, George Tel: 044 – 802 7301 Fax: 044 – 802 7373
E-mail: [email protected]
TONY TURNER AGENCIES Postal Add: PO Box 4212, Pietersburg 0900 Physical Add: 19 Latrium Street, Ladium, Ext 16, Pietersburg Tel: 015 – 293 1414 Fax: 015 – 293 1072 E-mail: [email protected]
TUNNELQUIP - DURBAN Postal Add: PO Box 338, Hilton3245 Physical Add: Unit 14 Kondi Park, 31 Portland Road, Mkondeni, Pietermaritzburg Tel: 031 – 701 1635 Fax: 031 – 701 9345
E-mail: [email protected]
A.D. ENTERPRISES – GABARONE BOTSWANA Postal Add: Private Bag 149 suite #53, Postnet, Kgaleview, Gabarone Physical Add: Plot 53/71, Gabarone, International, Commercial Park, Botswana Tel: 00267 – 318 6362 Fax: 0067 – 318 6364
E-mail: [email protected]
GREENCON Physical Add:1 Avon Rise, Avondale, Harare, Zimbabwe Postal Address: PO Box BW597, Barrowdale, Harare, Zimbabwe Cell: 00263 – 912 204 941 E-mail: [email protected]
10
2
8
9
1
2
11
3
4
5
6
7
TAGGIT Postal Add: PO Box 51386, Musgrave RD Physical Add: 107 Monzi, 319 Clark RD, Glenwood, Durban
Tel: 031 – 201 8747 Fax: 031 – 241 1047 E-mail: [email protected]